Synchrotron Radiation Based X-ray Absorption Spectroscopy: Fundamentals and Applications in Photocatalysis

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance. There is a knotty problem to rational designing high-performance photocatalyst, which largely depends on an in-depth insight into their structure-activity relationships and complex photocatalytic reaction mechanisms. Synchrotron radiation based X-ray absorption spectroscopy (XAS) is an important characterization method for photocatlayst to offer the element-specific key geometric and electronic structural information at the atomic level, on this basis, time-resolved XAS technique has a huge impact on mechanistic understanding of photochemical reaction owing to their powerful ability to probe, in real-time, the electronic and geometric structures evolution within photocatalysis reactions. This review will focus on the fundamentals of XAS and their applications in photocatalysis. The detailed applications obtained from XAS is described through the following aspects: 1) identifying local structure of photocatalyst; 2) uncovering in situ structure and chemical state evolution during photocatalysis; 3) revealing the photoexcited process. We will provide an in depth understanding on how the XAS method can guide the rational design of highly efficient photocatalyst. Finally, a systematic summary of XAS and related significance is made and the research perspectives are suggested.

Palladium K-edge X-ray Absorption Spectroscopy Studies on Controlled Ligand Systems

X-ray absorption spectroscopy (XAS) is widely used across the life and physical sciences to identify the electronic properties and structure surrounding a specific element. XAS is less often used for the characterization of organometallic compounds, especially for sensitive and highly reactive species. In this study, we used solid- and solution-phase XAS to compare a series of 25 palladium complexes in controlled ligand environments. The compounds include palladium centers in the formal I, II, III, and IV oxidation states, supported by tridentate and tetradentate macrocyclic ligands, with different halide and methyl ligand combinations. The Pd K-edge energies increased not only upon oxidizing the metal center but also upon increasing the denticity of the ligand framework, substituting sigma-donating methyl groups with chlorides, and increasing the charge of the overall metal complex by replacing charged ligands with neutral ligands. These trends were then applied to characterize compounds whose oxidation states were otherwise unconfirmed.

Valve turning towards on-cycle in cobalt-catalyzed Negishi-type cross-coupling

Ligands and additives are often utilized to stabilize low-valent catalytic metal species experimentally, while their role in suppressing metal deposition has been less studied. Herein, an on-cycle mechanism is reported for CoCl2bpy2 catalyzed Negishi-type cross-coupling. A full catalytic cycle of this kind of reaction was elucidated by multiple spectroscopic studies. The solvent and ligand were found to be essential for the generation of catalytic active Co(I) species, among which acetonitrile and bipyridine ligand are resistant to the disproportionation events of Co(I). Investigations, based on Quick-X-Ray Absorption Fine Structure (Q-XAFS) spectroscopy, Electron Paramagnetic Resonance (EPR), IR allied with DFT calculations, allow comprehensive mechanistic insights that establish the structural information of the catalytic active cobalt species along with the whole catalytic Co(I)/Co(III) cycle. Moreover, the acetonitrile and bipyridine system can be further extended to the acylation, allylation, and benzylation of aryl zinc reagents, which present a broad substrate scope with a catalytic amount of Co salt. Overall, this work provides a basic mechanistic perspective for designing cobalt-catalyzed cross-coupling reactions.

Identification of intermediates of a molecular ruthenium catalyst for water oxidation using in situ electrochemical X-ray absorption spectroscopy

This is the first study on a Ru(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylic acid) catalyst in solution using a home-built electrochemical cell, in combination with an energy-dispersive X-ray absorption spectroscopy setup. The oxidation state and coordination number of the catalyst during electrocatalysis could be estimated, while avoiding radiation damage from the X-rays.

Facet-dependent surface charge and Pb2+ adsorption characteristics of hematite nanoparticles: CD-MUSIC-eSGC modeling

Accurate prediction of the environmental fate of Pb depends on the understanding of Pb coordination to mineral surfaces. Here, the proton and Pb adsorption and speciation on hematite nanocrystals with different exposed crystallographic facets were investigated. High-resolution transmission electron microscopy images revealed that hematite nanoplates (HNP) were of 75.3 ± 9.5% (001) facets and 24.6 ± 9.3% (012) facets, while hematite nanocubes (HNC) were of 76.0 ± 11.1% (012) facets and 24.0 ± 3.2% (110) facets. Our modeling results revealed that the proton affinity constant (log K_H) of ≡FeOH^-0.5 and ≡Fe₃O^-0.5 was 7.8 and 10.8 on hematite (012) facets, and changed to 7.7 and 11.7 on (110) facets, respectively. Owing to the different atomic arrangements, (012) facets not only have higher adsorption performance for Pb, but also present a greater dependence on pH than (110) facets. Additionally, our modeling further indicated that (012) facets bind Pb via both bidentate and tridentate complexes, while (110) facets bind Pb only through bidentate complexes at pH 3.0-6.5. These results facilitate a more detailed understanding of the complex species of Pb on hematite surface while also provide new insight into the reactivity mechanism of individual hematite facets.

Importance learning estimator for the site-averaged turnover frequency of a disordered solid catalyst

For disordered catalysts such as atomically dispersed "single-atom" metals on amorphous silica, the active sites inherit different properties from their quenched-disordered local environments. The observed kinetics are site-averages, typically dominated by a small fraction of highly active sites. Standard sampling methods require expensive ab initio calculations at an intractable number of sites to converge on the site-averaged kinetics. We present a new method that efficiently estimates the site-averaged turnover frequency (TOF). The new estimator uses the same importance learning algorithm [Vandervelden et al., React. Chem. Eng. 5, 77 (2020)] that we previously used to compute the site-averaged activation energy. We demonstrate the method by computing the site-averaged TOF for a simple disordered lattice model of an amorphous catalyst. The results show that with the importance learning algorithm, the site-averaged TOF and activation energy can now be obtained concurrently with orders of magnitude reduction in required ab initio calculations.

Detection and Characterization of Mononuclear Pd(I) Complexes Supported by N2S2 and N4 Tetradentate Ligands

Palladium is a versatile transition metal used to catalyze a large number of chemical transformations, largely due to its ability to access various oxidation states (0, I, II, III, and IV). Among these oxidation states, Pd(I) is arguably the least studied, and while dinuclear Pd(I) complexes are more common, mononuclear Pd(I) species are very rare. Reported herein are spectroscopic studies of a series of Pd(I) intermediates generated by the chemical reduction at low temperatures of Pd(II) precursors supported by the tetradentate ligands 2,11-dithia[3.3](2,6)pyridinophane (N2S2) and N,N'-di-tert-butyl-2,11-diaza[3.3](2,6)pyridinophane (^tBuN4): [(N2S2)Pd^II(MeCN)]₂(OTf)₄ (1), [(N2S2)Pd^IIMe]₂(OTf)₂ (2), [(N2S2)Pd^IICl](OTf) (3), [(N2S2)Pd^IIX](OTf)₂ (X = tBuNC 4, PPh₃ 5), [(N2S2)Pd^IIMe(PPh₃)](OTf) (6), and [(^tBuN4)Pd^IIX₂](OTf)₂ (X = MeCN 8, tBuNC 9). In addition, a stable Pd(I) dinuclear species, [(N2S2)Pd^I(μ-tBuNC)]₂(ClO₄)₂ (7), was isolated upon the electrochemical reduction of 4 and structurally characterized. Moreover, the (^tBuN4)Pd^I intermediates, formed from the chemical reduction of [(^tBuN4)Pd^IIX₂](OTf)₂ (X = MeCN 8, tBuNC 9) complexes, were investigated by EPR spectroscopy, X-ray absorption spectroscopy (XAS), and DFT calculations and compared with the analogous (N2S2)Pd^I systems. Upon probing the stability of Pd(I) species under different ligand environments, it is apparent that the presence of soft ligands such as tBuNC and PPh₃ significantly improves the stability of Pd(I) species, which should make the isolation of mononuclear Pd(I) species possible.

Single-Atom Catalysts Supported by Crystalline Porous Materials: Views from the Inside

Single-atom catalysts (SACs) have recently emerged as an exciting system in heterogeneous catalysis showing outstanding performance in many catalytic reactions. Single-atom catalytic sites alone are not stable and thus require stabilization from substrates. Crystalline porous materials such as zeolites and metal-organic frameworks (MOFs) are excellent substrates for SACs, offering high stability with the potential to further enhance their performance due to synergistic effects. This review features recent work on the structure, electronic, and catalytic properties of zeolite and MOF-protected SACs, offering atomic-scale views from the "inside" thanks to the subatomic resolution of synchrotron X-ray absorption spectroscopy (XAS). The extended X-ray absorption fine structure and associated methods will be shown to be powerful tools in identifying the single-atom site and can provide details into the coordination environment and bonding disorder of SACs. The X-ray absorption near-edge structure will be demonstrated as a valuable method in probing the electronic properties of SACs by analyzing the white line intensity, absorption edge shift, and pre-/postedge features. Emphasis is also placed on in situ/operando XAS using state-of-the-art equipment, which can unveil the changes in structure and properties of SACs during the dynamic catalytic processes in a highly sensitive and time-resolved manner.

Chlorine-35 Solid-State Nuclear Magnetic Resonance Spectroscopy as an Indirect Probe of the Oxidation Number of Tin in Tin Chlorides

Ultrawideline ³⁵Cl solid-state nuclear magnetic resonance (SSNMR) spectra of a series of 12 tin chlorides were recorded. The magnitude of the ³⁵Cl quadrupolar coupling constant (C_Q) was shown to consistently indicate the chemical state (oxidation number) of the bound Sn center. The chemical state of the Sn center was independently verified by tin Mössbauer spectroscopy. C_Q(³⁵Cl) values of >30 MHz correspond to Sn(IV), while C_Q(³⁵Cl) readings of <30 MHz indicate that Sn(II) is present. Tin-119 SSNMR experiments would seem to be the most direct and effective route to interrogating tin in these systems, yet we show that ambiguous results can emerge from this method, which may lead to an incorrect interpretation of the Sn oxidation number. The accumulated ³⁵Cl NMR data are used as a guide to assign the Sn oxidation number in the mixed-valent metal complex Ph₃PPd^ImSnCl₂. The synthesis and crystal structure of the related Ph₃PPt^ImSnCl₂ are reported, and ¹⁹⁵Pt and ³⁵Cl SSNMR experiments were also used to investigate its Pt-Sn bonding. Plane-wave DFT calculations of ³⁵Cl, ¹¹⁹Sn, and ¹⁹⁵Pt NMR parameters are used to model and interpret experimental data, supported by computed ¹¹⁹Sn and ¹⁹⁵Pt chemical shift tensor orientations. Given the ubiquity of directly bound Cl centers in organometallic and inorganic systems, there is tremendous potential for widespread usage of ³⁵Cl SSNMR parameters to provide a reliable indication of the chemical state in metal chlorides.

Electronic and Catalytic Effects of Single-Atom Pd Additives on the Hydrogen Sensing Properties of Co3O4 Nanoparticle Films

Atomically dispersed Pd additives significantly enhanced the hydrogen sensing performance of a Co₃O₄ nanoparticle film, and their electronic along with catalytic roles were comprehensively investigated based on a series of systematic experiments. Aggregates of Co₃O₄ nanoparticles (approximately 3 nm in size) with homogeneously dispersed Pd additives at concentrations in the range of 1-20% (on a molar basis with respect to Co) were generated in the gas phase via reactive pulsed laser ablation of Co-Pd alloy targets in He/O₂ mixtures. The form of the Pd could be modified from single atoms to oxide clusters (1-2 nm), and the effects of these additives on the hydrogen sensing properties of thick films prepared by direct deposition were examined. The highest hydrogen sensing performance was obtained at 5% Pd loading, where single Pd atoms were present at the maximum density. Further Pd loading resulted in the formation of Pd oxide clusters and degraded the sensitivity. X-ray photoelectron spectroscopy and Pd K-edge X-ray absorption spectroscopy showed that single Pd atoms in the Pd⁴⁺ state at Co³⁺ sites on the Co₃O₄ nanoparticle surfaces donated electrons to the Co₃O₄ valence band. The greater concentration of free electrons led to an increase in the concentration of ionosorbed oxygen under dry air. Consequently, more ionosorbed oxygen was available for reaction with hydrogen, enhancing sensitivity. In situ X-ray absorption spectroscopy data confirmed that approximately 10% of the single Pd atoms in the Pd⁴⁺ state were reduced to Pd²⁺ during exposure to 1000 ppm H₂, implying that a Pd⁴⁺ ↔ Pd²⁺ catalytic redox cycle accelerates the water formation reaction during hydrogen sensing. The present results provide deeper insights and understanding of the effects of noble metal additives on gas sensing, while highlighting the unique role of single-atom additives.

In-situ Spectroscopic Techniques as Critical Evaluation Tools for Electrochemical Carbon dioxide Reduction: A Mini Review

Electrocatalysis plays a crucial role in modern electrochemical energy conversion technologies as a greener replacement for conventional fossil fuel-based systems. Catalysts employed for electrochemical conversion reactions are expected to be cheaper, durable, and have a balance of active centers (for absorption of the reactants, intermediates formed during the reactions), porous, and electrically conducting material to facilitate the flow of electrons for real-time applications. Spectroscopic and microscopic studies on the electrode-electrolyte interface may lead to better understanding of the structural and compositional deviations occurring during the course of electrochemical reaction. Researchers have put significant efforts in the past decade toward understanding the mechanistic details of electrochemical reactions which resulted in hyphenation of electrochemical-spectroscopic/microscopic techniques. The hyphenation of diverse electrochemical and conventional microscopic, spectroscopic, and chromatographic techniques, in addition to the elementary pre-screening of electrocatalysts using computational methods, have gained deeper understanding of the electrode-electrolyte interface in terms of activity, selectivity, and durability throughout the reaction process. The focus of this mini review is to summarize the hyphenated electrochemical and non-electrochemical techniques as critical evaluation tools for electrocatalysts in the CO2 reduction reaction.

Noble Metal Particles Confined in Zeolites: Synthesis, Characterization, and Applications

Noble metal nanoparticles or subnanometric particles confined in zeolites, that is, metal@zeolite, represent an important type of functional materials with typical core-shell structure. This type of material is known for decades and recently became a research hotspot due to their emerging applications in various fields. Remarkable achievements are made dealing with the synthesis, characterization, and applications of noble metal particles confined in zeolites. Here, the most representative research progress in metal@zeolites is briefly reviewed, aiming to boost further research on this topic. For the synthesis of metal@zeolites, various strategies, such as direct synthesis from inorganic or ligand-assisted noble metal precursors, multistep postsynthesis encapsulation and ion-exchange followed by reduction, are introduced and compared. For the characterization of metal@zeolites, several most useful techniques, such as electron microscopy, X-ray based spectroscopy, infrared and fluorescence emission spectroscopy, are recommended to check the successful confinement of noble metal particles in zeolite matrix and their unique physiochemical properties. For the applications of metal@zeolites, catalysis and optics are involved with an emphasis on catalytic applications including the size-dependent catalytic properties, the sintering-resistance properties, the substrate shape-selective catalysis, and catalysis modulation by zeolite microenvironment.

Operando Spectroscopic and Kinetic Characterization of Aerobic Allylic C-H Acetoxylation Catalyzed by Pd(OAc)2/4,5-Diazafluoren-9-one

Allylic C-H acetoxylations are among the most widely studied palladium(II)-catalyzed C-H oxidation reactions. While the principal reaction steps are well established, key features of the catalytic mechanisms are poorly characterized, including the identity of the turnover-limiting step and the catalyst resting state. Here, we report a mechanistic study of aerobic allylic acetoxylation of allylbenzene with a catalyst system composed of Pd(OAc)₂ and 4,5-diazafluoren-9-one (DAF). The DAF ligand is unique in its ability to support aerobic catalytic turnover, even in the absence of benzoquinone or other co-catalysts. Herein, we describe operando spectroscopic analysis of the catalytic reaction using X-ray absorption and NMR spectroscopic methods that allow direct observation of the formation and decay of a palladium(I) species during the reaction. Kinetic studies reveal the presence of two distinct kinetic phases: (1) a burst phase, involving rapid formation of the allylic acetoxylation product and formation of the dimeric Pd^I complex [Pd^I(DAF)(OAc)]₂, followed by (2) a post-burst phase that coincides with evolution of the catalyst resting state from the Pd^I dimer into a π-allyl-Pd^II species. The data provide unprecedented insights into the role of ancillary ligands in supporting catalytic turnover with O₂ as the stoichiometric oxidant and establish an important foundation for the development of improved catalysts for allylic oxidation reactions.

Catalytic Converters for Water Treatment

Fresh water demand is driven by human consumption, agricultural irrigation, and industrial usage and continues to increase along with the global population. Improved methods to inexpensively and sustainably clean water unfit for human consumption are desired, particularly at remote or rural locations. Heterogeneous catalysts offer the opportunity to directly convert toxic molecules in water to nontoxic products. Heterogeneous catalytic reaction processes may bring to mind large-scale industrial production of chemicals, but they can also be used at the small scale, like catalytic converters used in cars to break down gaseous pollutants from fuel combustion. Catalytic processes may be a competitive alternative to conventional water treatment technologies. They have much faster kinetics and are less operationally sensitive than current bioremediation-based methods. Unlike other conventional water treatment technologies (i.e., ion exchange, reverse osmosis, activated carbon filtration), they do not transfer contaminants into separate, more concentrated waste streams. In this Account, we review our efforts on the development of heterogeneous catalysts as advanced reduction technologies to treat toxic water contaminants such as chlorinated organics and nitrates. Fundamental understanding of the underlying chemistry of catalytic materials can inform the design of superior catalytic materials. We discuss the impact of the catalytic structure (i.e., the arrangement of metal atoms on the catalyst surface) on the catalyst activity and selectivity for these aqueous reactions. To explore these aspects, we used model metal-on-metal nanoparticle catalysts along with state-of-the-art in situ spectroscopic techniques and density functional theory calculations to deduce the catalyst surface structure and how it affects the reaction pathways and hence the activity and selectivity. We also discuss recent developments in photocatalysis and electrocatalysis for the treatment of nitrates, touching on fundamentals and surface reaction mechanisms. Finally, we note that despite over 20 years of growing research into heterogeneous catalytic systems for water contaminants, only a few pilot-scale studies have been conducted, with no large-scale implementation to date. We conceive of modular, on- or off-grid catalytic units that treat drinking water at the household tap, at a community well, or for larger-scale reuse of agricultural runoff. We discuss how these may be enhanced by combination with photocatalytic or electrocatalytic processes and how these reductive catalytic modules (catalytic converters for water) can be coupled with other modules for the removal of potential water contaminants.

Engineering of Transition Metal Catalysts Confined in Zeolites

Transition metal-zeolite composites are versatile catalytic materials for a wide range of industrial and lab-scale processes. Significant advances in fabrication and characterization of well-defined metal centers confined in zeolite matrixes have greatly expanded the library of available materials and, accordingly, their catalytic utility. In this review, we summarize recent developments in the field from the perspective of materials chemistry, focusing on synthesis, postsynthesis modification, (operando) spectroscopy characterization, and computational modeling of transition metal-zeolite catalysts.

Mercury capture on a supported chlorocuprate(ii) ionic liquid adsorbent studied using operando synchrotron X-ray absorption spectroscopy

Mercury scrubbing from gas streams using a supported 1-butyl-3-methylimidazolium chlorocuprate(ii) ionic liquid ([C₄mim]₂[Cu₂Cl₆]) has been studied using operando EXAFS. Initial oxidative capture as [HgCl₃]^- anions was confirmed, this was then followed by the unanticipated generation of mercury(i) chloride through comproportionation with additional mercury from the gas stream. Combining these two mechanisms leads to net one electron oxidative extraction of mercury from the gas with increased potential capacity and efficiency for supported ionic liquid mercury scrubbers.

Investigation of solvation effects on iron(II) and iron(III) salt solutions by X-ray absorption spectroscopy

The effects of solvation on iron salts has been studied by in situ X-ray absorption spectroscopy (XAS). It was seen that the solvated iron is significantly different from the solid precursor when dissolved in a variety of common solvents. Changes in the chemical and electronic properties of the solvated species make it essential to understand what is happening in solution prior to choosing appropriate reference materials for the interpretation of X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS) data. An understanding of the complexity of analyzing liquid systems by XAS is gained from this research.

Mechanistic Basis for Efficient, Site-Selective, Aerobic Catalytic Turnover in Pd-Catalyzed C-H Imidoylation of Heterocycle-Containing Molecules

A recently reported Pd-catalyzed method for oxidative imidoylation of C-H bonds exhibits unique features that have important implications for Pd-catalyzed aerobic oxidation catalysis: (1) The reaction tolerates heterocycles that commonly poison Pd catalysts. (2) The site selectivity of C-H activation is controlled by an N-methoxyamide group rather than a suitably positioned heterocycle. (3) A Pd0 source, Pd2(dba)3 (dba = dibenzylideneacetone), is superior to Pd(OAc)2 as a precatalyst, and other PdII sources are ineffective. (4) The reaction performs better with air, rather than pure O2. The present study elucidates the origin of these features. Kinetic, mechanistic, and in situ spectroscopic studies establish that PdII-mediated C-H activation is the turnover-limiting step. The tBuNC substrate is shown to coordinate more strongly to PdII than pyridine, thereby contributing to the lack of heterocycle catalyst poisoning. A well-defined PdII-peroxo complex is a competent intermediate that promotes substrate coordination via proton-coupled ligand exchange. The effectiveness of this substrate coordination step correlates with the basicity of the anionic ligands coordinated to PdII, and Pd0 catalyst precursors are most effective because they selectively afford the PdII-peroxo in situ. Finally, elevated O2 pressures are shown to contribute to background oxidation of the isonitrile, thereby explaining the improved performance of reactions conducted with air rather than 1 atm O2. These collective results explain the unique features of the aerobic C-H imidoylation of N-methoxybenzamides and have important implications for other Pd-catalyzed aerobic C-H oxidation reactions.

Unravelling the hidden link of lithium halides and application in the synthesis of organocuprates

As a versatile metal, copper has demonstrated a wide application in acting as both organometallic reagent and catalyst. Organocuprates are among the most used organometallic reagents in the formation of new carbon–carbon bonds in organic synthesis. Therefore, revealing the real structures of organocuprates in solution is crucial to provide insights into the reactivity of organocuprates. Here we provide several important insights into organocuprate chemistry. The main finding contains the following aspects. The Cu(0) particles were detected via the reduction of CuX by nBuLi or PhLi. The Cu(II) precursors CuX₂ (X=Cl, Br) could be used for the preparation of Gilman reagents. In addition, we provide direct evidence for the role and effect of LiX in organocuprate synthesis. Moreover, the EXAFS spectrum provides direct evidence for the exact structure of Li⁺ CuX₂⁻ ate complex in solution. This work not only sheds important light on the role of LiX in the formation of organocuprates but also reports two new routes for organocuprate synthesis.

Organocopper species are widely used in synthetic chemistry. Here the authors study the structure of the anionic complex formed from copper salts and lithium halides, showing it to be a key intermediate in the formation of organocuprates, and also show that Cu(II) precursors can form Gilman reagents.

X-ray Analyses of Lead Adsorption on the (001), (110), and (012) Hematite Surfaces

Predicting the environmental fate of lead relies on a detailed understanding of its coordination to mineral surfaces, which in turn reflects the innate reactivity of the mineral surface. In this research, we investigated fundamental dependencies in lead adsorption to hematite by coupling extended X-ray absorption fine structure (EXAFS) spectroscopy on hematite particles (10 and 50 nm) with resonant anomalous X-ray reflectivity (RAXR) to single crystals expressing the (001), (012), or (110) crystallographic face. The EXAFS showed that lead adsorbed in a bidentate inner-sphere manner in both edge and corner sharing arrangements on the FeO₆ octahedra for both particle sizes. The RAXR measurements confirmed these inner-sphere adsorption modes for all three hematite surfaces and additionally revealed outer-sphere adsorption modes not seen in the EXAFS. Lead uptake was larger and pH dependence was greater for the (012) and (110) surfaces, than the (001) surface, due to their expressing singly- and triply coordinated oxygen atoms the (001) surface lacks. In coupling these two techniques we provide a more detailed and nuanced picture of the coordination of lead to hematite while also providing fundamental insight into the reactivity of hematite.

Single-Electron Transfer between CuX2 and Thiols Determined by Extended X-Ray Absorption Fine Structure Analysis: Application in Markovnikov-Type Hydrothiolation of Styrenes

Transition-metal mediated C-S bond formation using thiol compounds has been widely used in recent years. However, there has been less focus on the interaction between the metal and thiol compounds. In this work, we have successfully evidenced the single-electron transfer between CuX₂ and thiophenol utilizing EXAFS. The fitting EXAFS results reveal that two halide anions are coordinated with the Cu^I center, whereas no sulfur atom is observed in the first coordination sphere. This Cu^I ate complex serves as the key intermediate for the proton transfer in the application of Markovnikov-type hydrothiolation reactions.

Calculating X-ray Absorption Spectra of Open-Shell Molecules with the Unrestricted Algebraic-Diagrammatic Construction Scheme for the Polarization Propagator

X-ray absorption spectroscopy (XAS) is a powerful tool that provides information about the electronic structure of molecules via excitation of electrons from the K-shell core region to the unoccupied molecular levels. These high-lying electronic core-excited states can be accurately calculated using the algebraic-diagrammatic construction scheme of second order ADC(2) by applying the core-valence separation (CVS) approximation to the ADC(2) working equations. For the first time, an efficient implementation of an unrestricted CVS-ADC(2) variant CVS-UADC(2) is presented for the calculation of open-shell molecules by treating α and β spins separately from each other. The potential of the CVS-UADC(2) method is demonstrated with a set of small organic radicals by comparison with standard TD-DFT/B3LYP values and experimental data. It turns out that the extended variant CVS-UADC(2)-x, in particular, provides the most accurate results with errors of only 0.1% compared to experimental values. This remarkable agreement justifies the prediction of yet nonrecorded experimental XAS spectra like the one of the anthracene cation. The cation exhibits additional peaks due to the half-filled single-occupied molecular orbital, which may help to distinguish cation from the neutral species.

Understanding the Solution and Solid-State Structures of Pd and Pt PSiP Pincer-Supported Hydrides

The PSiP pincer-supported complex ((Cy)PSiP)PdH [(Cy)PSiP = Si(Me)(2-PCy2-C6H4)2] has been implicated as a crucial intermediate in carboxylation of both allenes and boranes. At this stage, however, there is uncertainty regarding the exact structure of ((Cy)PSiP)PdH, especially in solution. Previously, both a Pd(II) structure with a terminal Pd hydride and a Pd(0) structure featuring an η(2)-silane have been proposed. In this contribution, a range of techniques were used to establish that ((Cy)PSiP)PdH and the related Pt species, ((Cy)PSiP)PtH, are true M(II) hydrides in both the solid state and solution. The single-crystal X-ray structures of ((Cy)PSiP)MH (M = Pd and Pt) and the related species ((iPr)PSiP)PdH [(iPr)PSiP = Si(Me)(2-P(i)Pr2-C6H4)2] are in agreement with the presence of a terminal metal hydride, and the exact geometry of ((Cy)PSiP)PtH was confirmed using neutron diffraction. The (1)H and (29)Si{(1)H}NMR chemical shifts of ((Cy)PSiP)MH (M = Pd and Pt) are consistent with a structure containing a terminal hydride, especially when compared to the chemical shifts of related pincer-supported complexes. In fact, in this work, two general trends relating to the (1)H NMR chemical shifts of group 10 pincer-supported terminal hydrides were elucidated: (i) the hydride shift moves downfield from Ni to Pd to Pt and (ii) the hydride shift moves downfield with more trans-influencing pincer central donors. DFT calculations indicate that structures containing a M(II) hydride are lower in energy than the corresponding η(2)-silane isomers. Furthermore, the calculated NMR chemical shifts of the M(II) hydrides using a relativistic four-component methodology incorporating all significant scalar and spin-orbit corrections are consistent with those observed experimentally. Finally, in situ X-ray absorption spectroscopy (XAS) was used to provide further support that ((Cy)PSiP)MH exist as M(II) hydrides in solution.

Speciation and kinetic study of iron promoted sugar conversion to 5-hydroxymethylfurfural (HMF) and levulinic acid (LA)

Identification of catalytic species and their contributions in iron catalyzed sugar conversion to hydroxymethylfurfural and levulinic acid.

Sailing into uncharted waters: recent advances in the in situ monitoring of catalytic processes in aqueous environments

This review presents recent advances inin situstudies of catalytic processes in the aqueous environment with an outlook of mesoscale imaging.

Structure-kinetic relationship study of organozinc reagents

Phenylzinc reagents prepared from various zinc halides show distinct kinetic features in the palladium-catalyzed Negishi-type oxidative coupling reaction, in which the phenylzinc reagent prepared from ZnI2 gives the highest rate. In situ infrared and X-ray absorption spectroscopy studies show that the higher reaction rate was observed for longer Zn-C bond distances.