Polyvinyl alcohol: an efficient fuel for synthesis of superparamagnetic LSMO nanoparticles for biomedical application

Solvent-Free Combustion-Assisted Synthesis of LaFe0.5Cr0.5O3 Nanostructures for Excellent Photocatalytic Performance toward Water Decontamination: The Effect of Fuel on Structural, Magnetic, and Photocatalytic Properties

The present study reports the synthesis of nanocrystalline LaFe_0.5Cr_0.5O₃ via a solvent-free combustion method using glycine, poly(vinyl alcohol), and urea as fuels, with superior photocatalytic activity. Rietveld refinement and powder X-ray diffraction data of nanomaterials demonstrate the existence of an orthorhombic phase that corresponds to the Pbnm space group. The crystallite size of nanoperovskite samples lies in the range of 20.9-36.4 nm. The Brunauer-Emmett-Teller (BET) surface area of the LaFe_0.5Cr_0.5O₃ fabricated using urea is found to be higher than that of the samples prepared using other fuels. The magnetic measurements of all samples done using a SQUID magnetometer showed a dominant antiferromagnetic character along with some weak ferromagnetic interactions. The optical band gap of all nanosamples lies in the visible range (2-2.6 eV), making them suitable photocatalysts in visible light. Their use as a photocatalyst for the degradation of the rhodamine B dye (model pollutant) is studied, and it has been observed that the catalyst fabricated using urea shows excellent degradation efficiency for rhodamine B, i.e., 99% in 60 min, with high reusability up to five runs. Additionally, the degradation of other organic dyes such as methylene blue, methyl orange, and a mixture of these dyes (rhodamine B + methylene blue + methyl orange) is also investigated with the most active photocatalyst, i.e., LFCO-U, to check its versatility.

Synthesis, physical properties, and biomedical applications of magnetic nanoparticles: a review

Recent innovations in nanotechnology have opened the applicability of multifunctional nanoparticles (NPs) in biomedical diagnosis and treatment. The examples of NPs which have attracted considerable attention in recent years are metals (e.g., Au, Ag, Mg), alloys (e.g., Fe-Co, Fe-Pd, Fe-Pt, Co-Pt), iron oxides (e.g., Fe₂O₃ and Fe₃O₄), substituted ferrites (e.g., MnFe₂O₄ and CoFe₂O₄), manganites (e.g., [Formula: see text]), etc. Special attention has been paid to magnetic NPs (MNPs), as they are the potential candidates for several biomedical appliances, such as hyperthermia applications, magnetic resonance imaging, contrast imaging, and drug delivery. To achieve effective MNPs, a thorough investigation on the synthesis, and characteristic properties, including size, magnetic properties, and toxicity, is required. Furthermore, the surfaces of the NPs must be tailored to improve the biocompatibility properties and reduce agglomeration. The present review focuses on different mechanisms to develop biocompatible MNPs. The utility of these MNPs in various biomedical applications, especially in treating and diagnosing human diseases, such as targeted drug delivery, hyperthermia treatment for cancer, and other biomedical diagnoses, is thoroughly discussed in this article. Different synthetic processes and important physical properties of these MNPs and their biocomposites are presented.

Chemically Induced Magnetic Dead Shells in Superparamagnetic Ni Nanoparticles Deduced from Polarized Small-Angle Neutron Scattering

Advances in the synthesis and characterization of colloidal magnetic nanoparticles (NPs) have yielded great gains in the understanding of their complex magnetic behavior, with implications for numerous applications. Recent work using Ni NPs as a model soft ferromagnetic system, for example, achieved quantitative understanding of the superparamagnetic blocking temperature-particle diameter relationship. This hinged, however, on the critical assumption of a ferromagnetic NP volume lower than the chemical volume due to a non-ferromagnetic dead shell indirectly deduced from magnetometry. Here, we determine both the chemical and magnetic average internal structures of Ni NP ensembles via unpolarized, half-polarized, and fully polarized small-angle neutron scattering (SANS) measurements and analyses coupled with X-ray diffraction and magnetometry. The postulated nanometric magnetic dead shell is not only detected but conclusively identified as a non-ferromagnetic Ni phosphide derived from the trioctylphosphine commonly used in hot-injection colloidal NP syntheses. The phosphide shell thickness is tunable via synthesis temperature, falling to as little as 0.5 nm at 170 °C. Temperature- and magnetic field-dependent polarized SANS measurements additionally reveal essentially bulk-like ferromagnetism in the Ni core and negligible interparticle magnetic interactions, quantitatively supporting prior modeling of superparamagnetism. These findings advance the understanding of synthesis-structure-property relationships in metallic magnetic NPs, point to a simple potential route to ligand-free stabilization, and highlight the power of the currently available suite of polarized SANS measurement and analysis capabilities for magnetic NP science and technology.

pH-sensitive natural almond gum hydrocolloid based magnetic nanocomposites for theragnostic applications

In this study, iron oxide (γFe₂O₃) nanoparticles synthesized via hydrothermal route and doxorubicin (Dox) were successfully encapsulated into natural almond gum hydrocolloids via antisolvent precipitation technique. Cubic γFe₂O₃ crystal structure of the synthesized iron oxide nanoparticles were confirmed using X-ray diffraction and X-ray photoelectron spectroscopy. The refinement of XRD and elemental analysis revealed oxygen vacancies, which is also indicated by an increased magnetization comparable to bulk γFe₂O₃. Magnetization studies revealed the superparamagnetic nature of IO and IODPC nanoparticles. The particles were characterized for its morphology (TEM and FESEM), size (FESEM, DLS), surface charge (DLS) and MRI (proton relaxation). The heating ability of the IO and IODPC nanoparticles was studied and their specific absorption rate was found to be 83.06 W/g and 154.37 W/g respectively. The entrapment efficiency of the IODPC nanoparticles was found to be 88.29%. The drug release studies revealed that IODPC nanoparticles were more responsive towards acidic pH and their release follows Higuchi diffusion kinetics. In-vitro uptake and in-vitro cell viability studies were performed for IODPC nanoparticles using HeLA cell lines.

Synthesis of La-Sr-Mn-O and La-Sr-Ca-Mn-O Perovskites Through Solution Combustion Using Urea at Fuel Deficient Conditions

La_0.7 Sr_0.3 MnO₃ (LSMO) nanoparticles have been obtained via solution combustion synthesis (SCS) using urea and glycine as fuels. Also, La_0.7 Sr_0.27 Ca_0.03 MnO₃ (LSCMO) nanoparticles have been synthesized through solution combustion using urea as fuel. In this paper, the combustion process was carried out with a fuel to oxidant ratio giving fuel deficient conditions ( ). The thermal analysis (TGA) indicate that the organic residues from the urea-nitrates gel mixture are eliminated above 600 °C and the post-synthesis heat treatment yields the formation of the desired phase without impurities. The obtained phases were analyzed using X-ray diffraction. The infrared analysis confirms the purity of the samples obtained using urea. However, the sample obtained using glycine confirms the formation of SrCO₃. The morphology was analyzed using a FE-SEM microscope, and it was found that the particles present a spherical shape with a mean size of around 45 nm in the selected samples. The samples' energy dispersive X-ray spectra show that the desired elements (La, Sr, Ca, Mn and O) are present in the nanoparticles. The measured zero field cooled (ZFC) and field cooled (FC) magnetizations were recorded from 4.5 to 380 K at 105 A/m to obtain their blocking and Curie temperatures. Moreover, the hysteresis loops measured at room temperature confirm the superparamagnetic behavior of the elaborated samples. According to the results obtained, these nanoparticles have interesting properties that make them candidates to explore not only for their potential in biomedical applications but also in refrigeration and magnetic storage devices.

Recent advancements in manganite perovskites and spinel ferrite-based magnetic nanoparticles for biomedical theranostic applications

Recently, magnetic nanoparticles (MNPs) based on manganite perovskites (La_1-xSr_xMnO₃ or LSMO) and/or spinel ferrites (i.e. SPFs with the formula MFe₂O₄; M=Co, Mg, Mn, Ni and Zn and mixed SPFs (e.g. Co-Zn, Mg-Mn, Mn-Zn and/or Ni-Zn)) have garnered great interest in magnetic hyperthermia therapy (MHT) as heat-inducing agents due to their tuneable magnetic properties including Curie temperature (T _c) to generate controllable therapeutic temperatures (i.e. 42 °C-45 °C)-under the application of an alternating magnetic field (AMF)-for the treatment of cancer. In addition, these nanoparticles are also utilized in magnetic resonance imaging (MRI) as contrast-enhancing agents. However, the employment of the LSMO/SPF-based MNPs in these MHT/MRI applications is majorly influenced by their inherent properties, which are mainly tuned by the synthesis factors. Therefore, in this review article, we have systematically discussed the significant chemical methods used to synthesize the LSMO/SPF-based MNPs and their corresponding intrinsic physicochemical properties (size/shape/crystallinity/dispersibility) and/or magnetic properties (including saturation magnetization (M _s)/T _c). Then, we have analyzed the usage of these MNPs for the effective imaging of cancerous tumors via MRI. Finally, we have reviewed in detail the heating capability (in terms of specific absorption rate) of the LSMO/SPF-based MNPs under calorimetric/biological conditions for efficient cancer treatment via MHT. Herein, we have mainly considered the significant parameters-such as size, surface coating (nature and amount), stoichiometry, concentration and the applied AMFs (including amplitude (H) and frequency (f))-that influence the heat induction ability of these MNPs.

Synthesis and characterization of magnetic manganese ferrites

This research work explored the synthesis and characterization of magnetic manganese ferrites using a simple combustion method. The purpose of creating the magnetic manganese ferrites was for their planned use as ozonation catalysts. Their magnetic properties allow for their recovery from the treatment system. Magnetic manganese ferrites were prepared by mixing manganese nitrate and iron nitrate in a stoichiometric ratio of 1:2. Polyvinyl alcohol was added to the mixed metal salt solution and the ratio of PVA: total nitrate salt added was varied from 1:1 up to 1:2 by weight. The resulting particles were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), tunneling electron microscope (TEM), and Ultraviolet-Visible spectroscopy (UV/Vis).

Comprehensive cytotoxicity studies of superparamagnetic iron oxide nanoparticles

Recently lots of efforts have been taken to develop superparamagnetic iron oxide nanoparticles (SPIONs) for biomedical applications. So it is utmost necessary to have in depth knowledge of the toxicity occurred by this material. This article is designed in such way that it covers all the associated toxicity issues of SPIONs. It mainly emphasis on toxicity occurred at different levels including cellular alterations in the form of damage to nucleic acids due to oxidative stress and altered cellular response. In addition focus is been devoted for in vitro and in vivo toxicity of SPIONs, so that a better therapeutics can be designed. At the end the time dependent nature of toxicity and its ultimate faith inside the body is being discussed.

Hyperthermia properties of hyaluronic acid-coated La0.7Sr0.3−xBaxMnO3 nanoparticles

The heating efficiency of LSMO nanoparticles for hyperthermia was improved drastically by doping Ba ions.

Surface-Driven Magnetotransport in Perovskite Nanocrystals

Unique insights into magnetotransport in 20 nm ligand-free La_0.67 Sr_0.33 MnO₃ perovskite nanocrystals of nearly perfect crystalline quality reveal a chemically altered 0.8 nm thick surface layer that triggers exceptionally large magnetoresistance at low temperature, independently of the spin polarization of the ferromagnetic core. This discovery shows how the nanoscale impacts magnetotransport in a material widely spread as electrode in hybrid spintronic devices.

Potential role of tracing stem cell transplantation and effects on the immune cell function of ferumoxytol combining with heparin and protamine in vivo/in vitro

Cell labeling and tracing have played an increasingly important role in the field of stem cell transplantation. Nanocomplexes combining three Food and Drug Administration (FDA)-approved drugs: heparin (H), protamine (P), and ferumoxytol (F) (HPF nanocomplexes) display high labeling efficiency in human adipose tissue-derived stem cells (hADSCs), but their biological safety has not been determined. In this study, we tested the labeling efficiency of HPF in hADSCs through in vitro cytotoxicity studies and in vivo murine preclinical studies using HPF-labeled hADSCs. The labeling process did not cause cell apoptosis and had little effect on cell proliferation. In vivo magnetic resonance imaging (MRI) showed that the HPF-labeled cells produced a hypointense signal that did not affect liver and kidney functions. However, after injection of HPF-labeled cells into mice, lymphocyte transformation testing showed that T and B lymphocyte proliferation was significantly increased. These findings suggest that extensive safety testing of HPF nanocomplexes is necessary; the process to evaluate HPF as an investigative new drug application could therefore be postponed.

LSMO Nanoparticles Coated by Hyaluronic Acid for Magnetic Hyperthermia

Magnetic hyperthermia with the treating temperature range of 41-46 °C is an alternative therapy for cancer treatment. In this article, lanthanum strontium manganates (La_1-x Sr _x MnO₃, 0.25 ≤ × ≤ 0.35) magnetic nanoparticles coated by hyaluronic acid (HA) which possesses the ability of targeting tumor cells were prepared by a simple hydrothermal method combined with a high-energy ball milling technique. The crystal structure, morphology, magnetic properties of the HA-coated magnetic nanoparticles (MNPs), and their heating ability under alternating magnetic field were investigated. It was found the HA-coated La_0.7Sr_0.3MnO₃, with particle diameter of ~100 nm, Curie temperature of 45 °C at a concentration 6 mg/ml, gave the optimal induction heating results. The heating temperature saturates at 45.7 °C, and the ESAR is 5.7 × 10^-3 W/g · kHz · (kA/m²) which is much higher than other reported results.

Multimodal Superparamagnetic Nanoparticles with Unusually Enhanced Specific Absorption Rate for Synergetic Cancer Therapeutics and Magnetic Resonance Imaging

Superparamagnetic nanoparticles (SPMNPs) used for magnetic resonance imaging (MRI) and magnetic fluid hyperthermia (MFH) cancer therapy frequently face trade off between a high magnetization saturation and their good colloidal stability, high specific absorption rate (SAR), and most importantly biological compatibility. This necessitates the development of new nanomaterials, as MFH and MRI are considered to be one of the most promising combined noninvasive treatments. In the present study, we investigated polyethylene glycol (PEG) functionalized La1-xSrxMnO3 (LSMO) SPMNPs for efficient cancer hyperthermia therapy and MRI application. The superparamagnetic nanomaterial revealed excellent colloidal stability and biocompatibility. A high SAR of 390 W/g was observed due to higher colloidal stability leading to an increased Brownian and Neel's spin relaxation. Cell viability of PEG capped nanoparticles is up to 80% on different cell lines tested rigorously using different methods. PEG coating provided excellent hemocompatibility to human red blood cells as PEG functionalized SPMNPs reduced hemolysis efficiently compared to its uncoated counterpart. Magnetic fluid hyperthermia of SPMNPs resulted in cancer cell death up to 80%. Additionally, improved MRI characteristics were also observed for the PEG capped La1-xSrxMnO3 formulation in aqueous medium compared to the bare LSMO. Taken together, PEG capped SPMNPs can be useful for diagnosis, efficient magnetic fluid hyperthermia, and multimodal cancer treatment as the amphiphilicity of PEG can easily be utilized to encapsulate hydrophobic drugs.

Multi-modal MR imaging and magnetic hyperthermia study of Gd doped Fe3O4 nanoparticles for integrative cancer therapy

Gadolinium (Gd) doped iron oxide nano-mediator in cancer theranostics are one of the most promising candidates in combining diagnostics (imaging) and therapeutics (molecular therapy) functions in a single, multimodal platform.

Role of functionalization: strategies to explore potential nano-bio applications of magnetic nanoparticles

Strategies to bridge the gap between magnetic nanoparticles for their nano bio applications.

Biological characteristics of adipose tissue-derived stem cells labeled with amine-surface-modified superparamagnetic iron oxide nanoparticles

Cell labeling and tracking are becoming increasingly important areas within the field of stem cell transplantation. The ability to track the migration and distribution of implanted cells is critical to understanding the beneficial effects and mechanisms of stem cell therapy. The present study investigated the effects of amine-surface-modified superparamagnetic iron oxide (SPIO) nanoparticles on the biological properties of human adipose tissue-derived stem cells (hADSCs). Monodisperse hydrophobic magnetite (Fe3 O4 ) nanoparticles were prepared using silicon and surface-modified with amine coating. Cell viability, proliferation, differentiation potential, and surface marker expression were evaluated. The magnetic particles (10-18 nm) displayed high labeling efficiency and stability in hADSCs. SPIO-labeled cells produced a hypointense signal and were effectively visualized by MRI for up to 21 days. The results of MTT proliferation assays and flow cytometry analysis demonstrated that SPIOs were biocompatible, viz. the labeling process did not cause cell death or apoptosis and had no side effects on cell proliferation. In vivo experiments showed that the magnetic particles did not affect liver and kidney function. The successful and stable labeling of hADSCs combined with efficient magnetic tropism demonstrates that SPIOs are promising candidates for hADSC tracking in hADSC-based cell therapy applications.

Temperature-dependent and time-dependent effects of hyperthermia mediated by dextran-coated La0.7Sr0.3MnO3: in vitro studies

Background

The purpose of this study was to investigate the therapeutic efficacy of dextran-coated (Dex) La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles-mediated hyperthermia at different temperatures (43°C, 45°C, and 47°C) based on cell killing potential and induction of heat shock proteins in a murine melanoma cell (B16F1) line.

Methods

LSMO nanoparticles were synthesized by a citrate-gel method and coated with dextran. B16F1 cells were exposed to the Dex-LSMO nanoparticles and heated using a radiofrequency generator. After heating, the morphology and topology of the cells were investigated by optical microscopy and atomic force microscopy. At 0 hours and 24 hours post heating, cells were harvested and viability was analyzed by the Trypan blue dye exclusion method. Apoptosis and DNA fragmentation were assessed by terminal deoxynucleotidyl transferase-dUTP nick end labeling (TUNEL) assay and agarose gel electrophoresis, respectively. An enzyme-linked immunosorbent assay was used to quantify heat shock protein levels.

Results

Our data indicate that cell death and induction of heat shock proteins in melanoma cells increased in a time-dependent and temperature-dependent manner, particularly at temperatures higher than 43°C. The mode of cell death was found to be apoptotic, as evident by DNA fragmentation and TUNEL signal. A minimum temperature of 45°C was required to irreversibly alter cell morphology, significantly reduce cell viability, and result in 98% apoptosis. Repeated cycles of hyperthermia could induce higher levels of heat shock proteins (more favorable for antitumor activity) when compared with a single cycle.

Conclusion

Our findings indicate a potential use for Dex-LSMO-mediated hyperthermia in the treatment of melanoma and other types of cancer.

Acrylamide modified poly(vinyl alcohol): crystalline and enhanced water solubility

A robust modification method for producing highly alcoholysized poly(vinyl alcohol) with good water solubility, enables tuning of the crystalline.

Low temperature magnetic and transport properties of LSMO–PZT nanocomposites

(a) M–H curves of different nanocomposites (NCs) at 80 K. Left and right insets show M vs. H and dM/dH vs. H curves respectively; (b) Magneto-resistance (MR) vs. H curve of different NCs at 200 K. Inset figure shows MR vs. H curve for a typical NC at various temperatures.

Lanthanum strontium manganese oxide (LSMO) nanoparticles: a versatile platform for anticancer therapy

Multiple uses of LSMO nanoparticles in anticancer therapy.

Cancer cell extinction through a magnetic fluid hyperthermia treatment produced by superparamagnetic Co–Zn ferrite nanoparticles

TEG mediated synthesis of CZF MNPs for cancer cell extinction by using magnetic fluid hyperthermia therapy.

Facile synthesis of multifunctional La1−xSrxMnO3@Au core–shell nanoparticles for biomedical applications

Multifunctional high-performance La_1−xSrxMnO₃@Au core–shell nanoparticles were synthesized by nanoemulsion with polymers, showing sharp Curie transition, excellent amphiphilic dispersibility and optical properties as well as biocompatibility.

Functionalization of La(0.7)Sr(0.3)MnO3 nanoparticles with polymer: studies on enhanced hyperthermia and biocompatibility properties for biomedical applications

Now-a-days surface functionalized La(0.7)Sr(0.3)MnO(3) (LSMO) nanoparticles by different biocompatible polymers are attracted considerable interest in various biomedical applications in general and magnetic fluid hyperthermia treatment of cancer in particular. In this paper La(0.7)Sr(0.3)MnO(3) nanoparticles are synthesized and functionalized with polymer (dextran, with mean particle size ~25 nm). Magnetic measurements of both coated and uncoated particles reveal the superparamagnetic nature at room temperature. The resulting coated particles form a stable suspension in an aqueous environment at physiological pH and possess a narrow hydrodynamic size distribution. In vitro cytotoxicity of the MNPs has been assessed under Trypan blue dye exclusion and MTT assay on HeLa and L929 cell lines. The results demonstrate that dextran functionalized nanoparticles have no significant effect on cell viability within the tested concentrations (0.2-1 mg/mL) as compared to bare LSMO. Magnetic fluid hyperthermia studies have been done in detail; the influence of an applied alternating current (AC) magnetic field on heat generation is presented in brief. Dextran functionalized LSMO has the higher Specific absorption rate (SAR) value than the bare LSMO. After functionalization with dextran the SAR values of LSMO nanoparticles increased from 25 to 51 W/g. The study shows that the rise in temperatures by these nanoparticles could be safely controlled around Curie temperature (T(c)).

Biocompatibility of magnetic Fe₃O₄ nanoparticles and their cytotoxic effect on MCF-7 cells

Background

The objective of this study was to evaluate the synthesis and biocompatibility of Fe₃O₄ nanoparticles and investigate their therapeutic effects when combined with magnetic fluid hyperthermia on cultured MCF-7 cancer cells.

Methods

Magnetic Fe₃O₄ nanoparticles were prepared using a coprecipitation method. The appearance, structure, phase composition, functional groups, surface charge, magnetic susceptibility, and release in vitro were characterized by transmission electron microscopy, x-ray diffraction, scanning electron microscopy-energy dispersive x-ray spectroscopy, and a vibrating sample magnetometer. Blood toxicity, in vitro toxicity, and genotoxicity were investigated. Therapeutic effects were evaluated by MTT [3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2H-tetrazolium bromide] and flow cytometry assays.

Results

Transmission electron microscopy revealed that the shapes of the Fe₃O₄ nanoparticles were approximately spherical, with diameters of about 26.1 ± 5.2 nm. Only the spinel phase was indicated in a comparison of the x-ray diffraction data with Joint Corporation of Powder Diffraction Standards (JCPDS) X-ray powder diffraction files. The O-to-Fe ratio of the Fe₃O₄ was determined by scanning electron microscopy-energy dispersive x-ray spectroscopy elemental analysis, and approximated pure Fe₃O₄. The vibrating sample magnetometer hysteresis loop suggested that the Fe₃O₄ nanoparticles were superparamagnetic at room temperature. MTT experiments showed that the toxicity of the material in mouse fibroblast (L-929) cell lines was between Grade 0 to Grade 1, and that the material lacked hemolysis activity. The acute toxicity (LD₅₀) was 8.39 g/kg. Micronucleus testing showed no genotoxic effects. Pathomorphology and blood biochemistry testing demonstrated that the Fe₃O₄ nanoparticles had no effect on the main organs and blood biochemistry in a rabbit model. MTT and flow cytometry assays revealed that Fe₃O₄ nano magnetofluid thermotherapy inhibited MCF-7 cell proliferation, and its inhibitory effect was dose-dependent according to the Fe₃O₄ nano magnetofluid concentration.

Conclusion

The Fe₃O₄ nanoparticles prepared in this study have good biocompatibility and are suitable for further application in tumor hyperthermia.