Antimicrobial nanotechnology: its potential for the effective management of microbial drug resistance and implications for research needs in microbial nanotoxicology

Impact of environment on transmission of antibiotic-resistant superbugs in humans and strategies to lower dissemination of antibiotic resistance

Antibiotics are the most efficient type of therapy developed in the twentieth century. From the early 1960s to the present, the rate of discovery of new and therapeutically useful classes of antibiotics has significantly decreased. As a result of antibiotic use, novel strains emerge that limit the efficiency of therapies in patients, resulting in serious consequences such as morbidity or mortality, as well as clinical difficulties. Antibiotic resistance has created major concern and has a greater impact on global health. Horizontal and vertical gene transfers are two mechanisms involved in the spread of antibiotic resistance genes (ARGs) through environmental sources such as wastewater treatment plants, agriculture, soil, manure, and hospital-associated area discharges. Mobile genetic elements have an important part in microbe selection pressure and in spreading their genes into new microbial communities; additionally, it establishes a loop between the environment, animals, and humans. This review contains antibiotics and their resistance mechanisms, diffusion of ARGs, prevention of ARG transmission, tactics involved in microbiome identification, and therapies that aid to minimize infection, which are explored further below. The emergence of ARGs and antibiotic-resistant bacteria (ARB) is an unavoidable threat to global health. The discovery of novel antimicrobial agents derived from natural products shifts the focus from chemical modification of existing antibiotic chemical composition. In the future, metagenomic research could aid in the identification of antimicrobial resistance genes in the environment. Novel therapeutics may reduce infection and the transmission of ARGs.

How Combined Macrolide Nanomaterials are Effective Against Resistant Pathogens? A Comprehensive Review of the Literature

Macrolide drugs are among the broad-spectrum antibiotics that are considered as "miracle drugs" against infectious diseases that lead to higher morbidity and mortality rates. Nevertheless, their effectiveness is currently at risk owing to the presence of devastating, antimicrobial-resistant microbes. In view of this challenge, nanotechnology-driven innovations are currently being anticipated for promising approaches to overcome antimicrobial resistance. Nowadays, various nanostructures are being developed for the delivery of antimicrobials to counter drug-resistant microbial strains through different mechanisms. Metallic nanoparticle-based delivery of macrolides, particularly using silver and gold nanoparticles (AgNPs & AuNPs), demonstrated a promising outcome with worthy stability, oxidation resistance, and biocompatibility. Similarly, macrolide-conjugated magnetic NPs resulted in an augmented antimicrobial activity and reduced bacterial cell viability against resistant microbes. Liposomal delivery of macrolides also showed favorable synergistic antimicrobial activities in vitro against resistant strains. Loading macrolide drugs into various polymeric nanomaterials resulted in an enhanced zone of inhibition. Intercalated nanomaterials also conveyed an outstanding macrolide delivery characteristic with efficient targeting and controlled drug release against infectious microbes. This review abridges several nano-based delivery approaches for macrolide drugs along with their recent achievements, challenges, and future perspectives.

Influence of silver ion release on the inactivation of antibiotic resistant bacteria using light-activated silver nanoparticles

The widespread increase in antibiotic resistance (AR), in an extensive range of microorganisms, demands the development of alternative antimicrobials with novel non-specific low-mutation bacterial targets. Silver nanoparticles (AgNPs) and photosensitizers (PSs) are promising antimicrobial agents with broad-spectrum activity and low tendency for antimicrobial resistance development. Herein, we investigated the light-mediated oxidation of AgNPs for accelerated release of Ag⁺ in the antibacterial synergy of PS-AgNP conjugates using protoporphyrin IX (PpIX) as a PS. Also, the influence of polyethyleneimine (PEI) coated AgNPs in promoting antibacterial activity was examined. We synthesized, characterized and tested the antimicrobial effect of three nanoparticles: AgNPs, PpIX-AgNPs, and PEI-PpIX-AgNPs against a methicillin-resistant Staphylococcus aureus strain (MRSA) and a wild-type multidrug resistant (MDR) E. coli. PpIX-AgNPs were the most effective material achieving >7 log inactivation of MRSA and MDR E. coli. The order of bacterial log inactivation was PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs. This order correlates with the trend of Ag⁺ concentration released by the NPs (PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs). Our study confirms a synergistic effect between PpIX and AgNPs in the inactivation of AR pathogens with about 10-fold increase in inactivation of ARB relative to AgNPs only. The concentration of Ag⁺ released from NPs determined the log inactivation of MRSA and MDR E. coli more than either the phototoxic effect or the electrostatic interaction promoted by surface charge of nanoparticles with bacteria cells. All NPs showed negligible cytotoxicity to mammalian cells at the bacterial inhibitory concentration after 24 h exposure. These observations confirm the crucial role of optimized Ag⁺ release for enhanced performance of AgNP-based antimicrobials against AR pathogens.

Nanotechnological interventions of the microbiome as a next-generation antimicrobial therapy

The rise of antimicrobial resistance (AMR) impacts public health due to the diminished potency of existing antibiotics. The microbiome plays an important role in the host's immune system activity and shows the history of exposure to antimicrobials and its manipulation in combating antimicrobial resistance. Advancements in gene technologies, DNA sequencing, and computational biology have emerged as powerful platforms to better understand the relationship between animals and microorganisms (MOs). The past few years have witnessed an increase in the use of nanotechnology, both in industry and in academia, as tools to tackle antimicrobial resistance. New strategies of microbiome manipulation have been developed, such as the use of prebiotics, probiotics, peptides, antibodies, an appropriate diet, phage therapy, and the use of various nanotechnological techniques. Owing to the research outcomes, targeted delivery of antimicrobials with some modifications with nanoparticles can lead to the destruction of resistant microbial cells. In addition, nanoparticles have been studied for their potential antimicrobial effects both in vitro and in vivo. In this review, we highlight key opportunistic areas for applying nanotechnologies with the aim of manipulating the microbiome for the treatment of antimicrobial resistance. Besides providing a detailed review on various nanomaterials, technologies, opportunities, technical needs, and potential approaches for the manipulation of the microbiome to address these challenges, we discuss future challenges and our perspective.

Green Synthesis of Silver Nanoparticles using Kayu tulak Leaf (Schefflera Elliptica Harms) Infusion as a Bio-reductant and Its Antibacterial Activity

Metal nanoparticles and exploration of green synthesis can be applied to lung tissue therapy, cancer, and even vaccines. Additionally, due to the rise in microbial resistance or the demand for novel antibiotics, the use of NPs as an antibacterial agent has expanded. Meanwhile, using methods to produce metal nanoparticles based on the abundance of biodiversity as a green-reducing agent will be safer. In the present study, Kayu tulak leaves extract served as the green-reducing agent. The synthesized silver nanoparticles were characterized using a UV-Vis spectrophotometer, PSA (Particle Size Analyzer), and TEM (Transmission Electron Microscope). The results showed that the silver nanoparticles synthesized using Kayu tulak leaf extract at concentrations of AgNO3 1 and 2 mM had absorbance peaks at 436.5 nm and 467 nm, respectively. The average particle size distributions of the two silver nanoparticles were 88.2 and 16.9 nm, respectively. The characterization of silver nanoparticles using TEM obtained a mixture of spherical, hexagonal, and triangular shapes. The silver nanoparticles synthesized using Kayu tulak as a bio-reductant exhibited antibacterial activity. At AgNO3 solutions of 1 and 2 mM, silver nanoparticles showed antibacterial activity against Escherichia coli with inhibition zone diameters of 6.39 ± 0.30 mm and 8.28 ± 0.19 mm (moderate inhibition), while against Staphylococcus aureus were 4.30 ± 0.24 mm (weak inhibition) and 6.39 ± 0.27 mm (moderate inhibition).

Nano delivery systems to the rescue of ciprofloxacin against resistant bacteria "E. coli; P. aeruginosa; Saureus; and MRSA" and their infections

Ciprofloxacin (CIP) a broad-spectrum antibiotic, is used extensively for the treatment of diverse infections and diseases of bacteria origin, and this includes infections caused by E. coli; P. aeruginosa; S. aureus; and MRSA. This extensive use of CIP has therefore led to an increase in resistance by these infection causing organisms. Nano delivery systems has recently proven to be a possible solution to resistance to these organisms. They have been applied as a strategy to improve the target specificity of CIP against infections and diseases caused by these organisms, thereby maximising the efficacy of CIP to overcome the resistance. Herein, we proffer a brief overview of the mechanisms of resistance; the causes of resistance; and the various approaches employed to overcome this resistance. The review then proceeds to critically evaluate various nano delivery systems including inorganic based nanoparticles; lipid-based nanoparticles; capsules, dendrimers, hydrogels, micelles, and polymeric nanoparticles; and others; that have been applied for the delivery of CIP against E. coli; P. aeruginosa; S. aureus; and MRSA infections. Finally, the review highlights future areas of research, for the optimisation of various nano delivery systems, to maximise the therapeutic efficacy of CIP against these organisms. This review confirms the potential of nano delivery systems, for addressing the challenges of resistance to caused by E. coli; P. aeruginosa; S. aureus; and MRSA to CIP.

Fate of antibiotic resistant genes in wastewater environments and treatment strategies - A review

Antibiotic-resistant bacteria (ARB) and antibiotic-resistant genes (ARGs) have emerged in aquatic environments through the discharge of large amounts of antibiotics into wastewater. Well-designed wastewater treatment plants (WWTPs) with effective treatment processes are essential to prevent the release of ARGs directly into the environment. Although some systematic sequential treatment methods are used to remove ARGs, considerable gaps in removal mechanisms will be discussed. Therefore, deep analysis and discussion of various treatment methods are required to understand the ARGs removal mechanisms. In this manuscript, the role of antibiotics and the resistance mechanism of ARB are discussed in depth. In addition, the fate of ARGs in an aquatic environment and detection methods are compared comprehensively and discussed. In particular, the advantages and disadvantages of various methods are summarized and reviewed critically. Finally, combined technologies, such as advanced oxidation process (AOP) with biochemical systems, membrane separation with electrochemical AOP, ultrafiltration (UF) membrane coupled with photocatalytic treatment, and UF membrane separation coupled with sonication, are introduced. Overall, low-energy anaerobic treatment reactors with any of the above combined treatments might reduce the discharge of large quantities of ARGs into the environment. Finally, this review provides valuable insights for better ARG removal technologies by introducing combined effective treatment strategies used in real WWTPs.

Safer plant-based nanoparticles for combating antibiotic resistance in bacteria: A comprehensive review on its potential applications, recent advances, and future perspective

BACKGROUND

Antibiotic resistance is one of the current threats to human health, forcing the use of drugs that are more noxious, costlier, and with low efficiency. There are several causes behind antibiotic resistance, including over-prescription of antibiotics in both humans and livestock. In this scenario, researchers are shifting to new alternatives to fight back this concerning situation.

SCOPE AND APPROACH

Nanoparticles have emerged as new tools that can be used to combat deadly bacterial infections directly or indirectly to overcome antibiotic resistance. Although nanoparticles are being used in the pharmaceutical industry, there is a constant concern about their toxicity toward human health because of the involvement of well-known toxic chemicals (i.e., sodium/potassium borohydride) making their use very risky for eukaryotic cells.

KEY FINDINGS AND CONCLUSIONS

Multiple nanoparticle-based approaches to counter bacterial infections, providing crucial insight into the design of elements that play critical roles in the creation of antimicrobial nanotherapeutic drugs, are currently underway. In this context, plant-based nanoparticles will be less toxic than many other forms, which constitute promising candidates to avoid widespread damage to the microbiome associated with current practices. This article aims to review the actual knowledge on plant-based nanoparticle products for antibiotic resistance and the possible replacement of antibiotics to treat multidrug-resistant bacterial infections.

Graphene-tethered 5-fluorouracil-loaded ZnO nanocomposites for pH-responsive enhanced efficacy in drug delivery on MCF-7 cells

Graphene-tethered ZnO nanocomposites with rod shapes and oval-shaped 5-fluorouracil-loaded graphene-supported ZnO nanohybrids were synthesized using one pot wet chemical bottom up coprecipitation method. The presence of hexagonal nanophase of ZnO lattice with surface-tethered graphene sheets were confirmed using XRD pattern and supportive UV-Vis and FTIR spectrum. XRD data of these nanocomposites were matched with TEM images which proved the hexagonal ZnO core maintained even after surface tailoring with graphene and drug loading. These porous nanocomposites were loaded with anticancer drug 5-fluorouracil for enhancement in anticancer activity on breast cancer MCF-7 cells. The optical, morphological and phase physicochemical characterizations of the nanohybrids were performed using techniques as UV-Vis, FTIR, XRD spectrometry, and TEM microscopic analysis. The nanocomposites did not only exhibit biocompatibility but also pH responsive in vitro delivery applied for anticancer therapy on the basis of spectrometric MTT assay following sustained drug release with zero-order Peppas release kinetics. These nanocomposites exhibited higher anticancer activity on MCF-7 cells than free drug after in vitro MTT assay. On the basis of these demonstrations, these newer nanocomposites find future biomedical applications in pH-responsive drug delivery.

Silver Nanoparticle Production Mediated by Vitis vinifera Cane Extract: Characterization and Antibacterial Activity Evaluation

The ever-growing range of possible applications of nanoparticles requires their mass production. However, there are problems resulting from the prevalent methods of nanoparticle production; physico-chemical routes of nanoparticle synthesis are not very environmentally friendly nor cost-effective. Due to this, the scientific community started exploring new methods of nanoparticle assembly with the aid of biological agents. In this study, ethanolic Vitis vinifera cane extract combined with silver nitrate was used to produce silver nanoparticles. These were subsequently characterized using UV-visible (UV-Vis) spectrometry, transmission electron microscopy, and dynamic light-scattering analysis. The antimicrobial activity of produced nanoparticles was tested against the planktonic cells of five strains of Gram-negative bacterium Pseudomonas aeruginosa (PAO1, ATCC 10145, ATCC 15442, DBM 3081, and DBM 3777). After that, bactericidal activity was assessed using solid medium cultivation. In the end, nanoparticles’ inhibitory effect on adhering cells was analyzed by measuring changes in metabolic activity (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay-MTT). Our results confirmed that ethanolic Vitis vinifera cane extract is capable of mediating silver nanoparticle production; synthesis was conducted using 10% of extract and 1 mM of silver nitrate. The silver nanoparticles’ Z-average was 68.2 d nm, and their zeta potential was –30.4 mV. These silver nanoparticles effectively inhibited planktonic cells of all P. aeruginosa strains in concentrations less than 5% v/v and inhibited biofilm formation in concentrations less than 6% v/v. Moreover, minimum bactericidal concentration was observed to be in the range of 10–16% v/v. According to the results in this study, the use of wine agriculture waste is an ecological and economical method for the production of silver nanoparticles exhibiting significant antimicrobial properties.

Different Nanotechnology Approaches for Ciprofloxacin Delivery Against Multidrug-Resistant Microbes

The percentages of organisms exhibiting antimicrobial resistance, especially resistance to multiple antibiotics, are incessantly increasing. Studies investigated that many bacteria are being resistant to ciprofloxacin. This review addresses the current knowledge on nano-based ciprofloxacin delivery approaches to improve its effectiveness and overcome the resistance issues. Ciprofloxacin delivery can be modified by encapsulating with or incorporating in different polymeric nanoparticles such as chitosan, PLGA, albumin, arginine, and other organic and inorganic nanostructure systems. Most of these nano-approaches are promising as an alternative strategy to improve the therapeutic effectiveness of ciprofloxacin in the future.

Metal-based nanoparticles, sensors, and their multifaceted application in food packaging

Due to the global rise of the human population, one of the top-most challenges for poor and developing nations is to use the food produces safely and sustainably. In this regard, the storage of surplus food (and derived products) without loss of freshness, nutrient stability, shelf life, and their parallel efficient utilization will surely boost the food production sector. One of the best technologies that have emerged within the last twenty years with applications in the packaging of food and industrial materials is the use of green mode-based synthesized nanoparticles (NPs). These NPs are stable, advantageous as well as eco-friendly. Over the several years, numerous publications have confirmed that these NPs exert antibacterial, antioxidant, and antifungal activity against a plethora of pathogens. The storage in metal-based NPs (M-NPs) does not hamper the food properties and packaging efficiency. Additionally, these M-NPs help in the improvement of properties including freshness indicators, mechanical properties, antibacterial and water vapor permeability during food packaging. As a result, the nano-technological application facilitates a simple, alternate, interactive as well as reliable technology. It even provides positive feedback to food industries and packaging markets. Taken together, the current review paper is an attempt to highlight the M-NPs for prominent applications of antimicrobial properties, nanosensors, and food packaging of food items. Additionally, some comparative reports associated with M-NPs mechanism of action, risks, toxicity, and overall future perspectives have also been made.

The contribution of nano-based strategies in overcoming ceftriaxone resistance: a literature review

Antimicrobial drug resistance, including resistance to multiple antibiotics, is continuously increasing. According to research findings, many bacteria resistant to other antibiotics were susceptible to ceftriaxone. However, over the last few years, ceftriaxone resistance has become growing and extremely worrisome challenge to the global healthcare system and several strategies have been initiated to contain the spread of antimicrobial drug resistance. Its extended use for therapeutic or preventative measures in humans and farm animals resulted in the development and spread of resistance. Recent advances in nanotechnology also offer novel formulations based on distinct types of nanostructure particles with different sizes and shapes, and flexible antimicrobial properties. For ceftriaxone, several nanostructured formulations through conjugation, intercalation, encapsulation with lipid carrier, and polymeric films have been investigated by different groups with promising results in combating the development of resistance. This review addressed the existing knowledge and practice on the contribution of nano-based delivery approaches in overcoming ceftriaxone resistance. Evidences have been generated from published research articles using major search electronic databases such as PubMed, Medline, Google Scholar, and Science Direct.

Antibiotic resistance in the environment: a critical insight on its occurrence, fate, and eco-toxicity

The overuse, misuse, and underuse of antibiotics tend to increase the antibiotic burden in the environment resulting into the evolution in microbial community to possess resistance that renders antibiotics ineffective against them. The current review recapitulates the present state of knowledge about the occurrence and fate of antibiotics in various environmental matrices. Also, the prevalence of antibiotic-resistant bacteria/antibiotic-resistant genes (ARB/ARGs) in various biological and non-biological systems, eco-toxicity of antibiotics on non-target organisms, and remediation methods for antibiotics and ARB/ARGs removal were critically reviewed. Furthermore, a comparison of various technologies for their efficiency to eliminate antibiotic residues and ARB/ARGs is made. The study identified gaps in the investigation of toxic effects of low concentration of antibiotics and the mixture of multiple antibiotics on non-target organisms. The study of antibiotics' phytotoxicity and toxicity towards sediment and soil-dwelling organisms are also recognized as a knowledge gap. The review also details policies implemented across the globe to fight against antibiotic resistance, and the scarcity of data on lab to land transferred remediation technology was identified. The present study entails a critical review of literature providing guidelines for the articulation of policies for prudent use of antibiotics, limits on the amount of antibiotics in pharmaceutical formulations, and regular surveillance in the Indian context.

Nano-scale applications in aquaculture: Opportunities for improved production and disease control

Aquaculture is the fastest growing food-production sector and is vital to food security, habitat restoration and endangered species conservation. One of the continued challenges to the industry is our ability to manage aquatic disease agents that can rapidly decimate operations and are a constant threat to sustainability. Such threats also evolve as microbes acquire resistance and/or new pathogens emerge. The advent of nanotechnology has transformed our approach to fisheries disease management with advances in water disinfection, food conversion, fish health and management systems. In this review, several nano-enabled technology successes will be discussed as they relate to the challenges associated with disease management in the aquaculture sector, with a particular focus on fishes. Future perspectives on how nanotechnology can offer functional approaches for improving disinfection and innovating at the practical space of early warning systems will be discussed. Finally, the importance of "safety by design" approaches to the development of novel commercial nano-enabled products will be emphasized.

Synthesis and characterization of chitosan silver nanoparticle decorated with benzodioxane coupled piperazine as an effective anti-biofilm agent against MRSA: A validation of molecular docking and dynamics

Biomaterial research has improved the delivery and efficacy of drugs over a wide range of pharmaceutical applications. The objective of this study was to synthesize benzodioxane coupled piperazine decorated chitosan silver nanoparticle (Bcp*C@AgNPs) against methicillin-resistant Staphylococcus aureus (MRSA) and to assess the nanoparticle as an effective candidate for antibacterial and anti-biofilm care. Antibacterial activity of the compound was examined and minimum inhibitory concentration (MIC) was observed at (10.21 ± 0.03 ZOI) a concentration of 200 μg/mL. The Bcp*C@AgNPs interferes with surface adherence of MRSA, suggesting an anti-biofilm distinctive property that is verified for the first time by confocal laser microscopic studies. By ADMET studies the absorption, distribution, metabolism, excretion and toxicity of the compound was examined. The interaction solidity and the stability of the compound when surrounded by water molecules were analyzed by docking and dynamic simulation analysis. The myoblast cell line (L6) was considered for toxicity study and was observed that the compound exhibited less toxic effect. This current research highlights the biocidal efficiency of Bcp*C@AgNPs with their bactericidal and anti-biofilm properties over potential interesting clinical trial targets in future.

Nanoemulsion-Based Technologies for Delivering Natural Plant-Based Antimicrobials in Foods

There is increasing interest in the use of natural preservatives (rather than synthetic ones) for maintaining the quality and safety of foods due to their perceived environmental and health benefits. In particular, plant-based antimicrobials are being employed to protect against microbial spoilage, thereby improving food safety, quality, and shelf-life. However, many natural antimicrobials cannot be utilized in their free form due to their chemical instability, poor dispersibility in food matrices, or unacceptable flavor profiles. For these reasons, encapsulation technologies, such as nanoemulsions, are being developed to overcome these hurdles. Indeed, encapsulation of plant-based preservatives can improve their handling and ease of use, as well as enhance their potency. This review highlights the various kinds of plant-based preservatives that are available for use in food applications. It then describes the methods available for forming nanoemulsions and shows how they can be used to encapsulate and deliver plant-based preservatives. Finally, potential applications of nano-emulsified plant-based preservatives for improving food quality and safety are demonstrated in the meat, fish, dairy, and fresh produce areas.

Pulling the Brakes on Fast and Furious Multiple Drug-Resistant (MDR) Bacteria

Life-threatening bacterial infections have been managed by antibiotics for years and have significantly improved the wellbeing and lifetime of humans. However, bacteria have always been one step ahead by inactivating the antimicrobial agent chemically or by producing certain enzymes. The alarming universal occurrence of multidrug-resistant (MDR) bacteria has compelled researchers to find alternative treatments for MDR infections. This is a menace where conventional chemotherapies are no longer promising, but several novel approaches could help. Our current review article discusses the novel approaches that can combat MDR bacteria: starting off with potential nanoparticles (NPs) that efficiently interact with microorganisms causing fatal changes in the morphology and structure of these cells; nanophotothermal therapy using inorganic NPs like AuNPs to destroy pathogenic bacterial cells; bacteriophage therapy against which bacteria develop less resistance; combination drugs that act on dissimilar targets in distinctive pathways; probiotics therapy by the secretion of antibacterial chemicals; blockage of quorum sensing signals stopping bacterial colonization, and vaccination against resistant bacterial strains along with virulence factors. All these techniques show us a promising future in the fight against MDR bacteria, which remains the greatest challenge in public health care.

Nanotechnology as a viable alternative for the removal of antimicrobial resistance determinants from discharged municipal effluents and associated watersheds: A review

Effective and efficient utilization of antimicrobial drugs has been one of the important cornerstone of modern medicine. However, since antibiotics were first discovered by Alexander Fleming about a century ago, the time clock of antimicrobial resistance (AMR) started ticking somewhat leading to a global fear of a possible "post-antimicrobial era". Antibiotic resistance (AR) remains a serious challenge causing global outcry in both the clinical setting and the environment. The huge influence of municipal wastewater effluent discharges on the aquatic environment has made the niche a hotspot of research interest in the study of emergence and spread of AMR microbes and their resistance determinants/genes. The current review adopted a holistic approach in studying the proliferation of antibiotic resistance determinants (ARDs) as well as their impacts and fate in municipal wastewater effluents and the receiving aquatic environments. The various strategies deployed hitherto for the removal of resistance determinants in municipal effluents were carefully reviewed, while the potential for the use of nanotechnology as a viable alternative is explicitly explored. Also, highlighted in this review are the knowledge gaps to be filled in order to curtail the spread of AMR in aquatic environment and lastly, suggestions on the applicability of nanotechnology in eliminating AMR determinants in municipal wastewater treatment facilities are proffered.

The effects of calcium–silicate–hydrate (C–S–H) seeds on reference microorganisms

Building materials are constantly improved with various additives and admixtures in order to achieve goals ranging from obtaining increased durability or antimicrobial activity up to reducing the carbon footprint left by the cement production. Since nanomaterials were proposed for cement products, many studies explored the possibilities for their incorporation. One of the novel trends in studying these materials is evaluating their impact on living organisms, with the focus not only on toxicology but also on the application potential. Therefore, in this study, we investigated the effects of three types of calcium–silicate–hydrate (C–S–H) seeds on reference microorganisms in the scope of their basic physiology and primary metabolism. Shape, size and elemental composition of C–S–H seeds were also evaluated. The tests on the reference microorganisms have shown that the reaction to these nanomaterials can be specific and depends on the strain as well as the type of used nanomaterial. Furthermore, the presence of C–S–H seeds in the growth environment led to metabolic stimulation that resulted in faster growth, higher biochemical activity, and increased biofilm formation. Based on our findings, we conclude that even though C–S–H seeds have antimicrobial potential, they can be potentially used to promote the growth of selected microbial strains. This phenomenon could be further investigated towards the formation of beneficial biofilms on building materials.

New insights into the role of nanotechnology in microbial food safety

Today, the role of nanotechnology in human life is undeniable as a broad range of industries, particularly food and medicine sectors, have been dramatically influenced. Nanomaterials can contribute to food safety by forming new nano-sized ingredients with modified physicochemical characteristics. Nanotechnologies can inhibit the growth of food spoilage microorganisms by recruiting novel and unique agents that are involved in removal of microbes from foods or prevent adhesion of microbial cells to food surfaces. Hence, nanotechnology could be considered as a high-potential tool in food packaging, safety, and preservation. Moreover, the prevention of biofilm formation by disturbing the attachment of bacteria to the food surface is another useful nanotechnological approach. Recently, nanoparticle-based biosensors have been designed and developed to detect the food-borne pathogens and hazardous substances through complicated mechanisms. During the past half-century, many methods such as freeze-drying and spray drying have been employed for increasing the viability in food industries; however, the other novel approaches such as encapsulation methods have also been developed. Admittedly, some beneficial bacteria such as probiotics bring diverse benefits for human health if only they are in a sufficient number and viability in the food products and gastrointestinal tract (GI). Encapsulation of these valuable microbial strains by nanoparticles improves the survival of probiotics under harsh conditions such as extreme levels of temperature, pH, and salinity during the processing of food products and within the GIT tract. The survival and effectiveness of encapsulated microorganisms depends on different factors including function of cell wall components in bacteria and type of coating materials. This review aims to broadly explore the potential of different aspects of nanotechnology in food industry, especially for packaging, preservation, safety, and viability.

Antibacterial Activity of Fusidic Acid and Sodium Fusidate Nanoparticles Incorporated in Pine Oil Nanoemulgel

Purpose

Fusidic acid (FA) and sodium fusidate (SF) have problems in their skin penetration and stability resulting in a reduction in their potency; therefore, the objective of this study was to develop FA and SF nanoemulgels to improve the antibacterial activity of the drugs.

Methods

FA and SF nanoemulgel formulations were prepared by the incorporation of FA and SF nanoemulsions with Carbopol hydrogel. First, the drugs were screened for their solubility in different oils and surfactants to choose the suitable oil and surfactants for the drugs, and then the drug nanoemulsion formulations were prepared by a self-nanoemulsifying technique using Tween 80, Span 20 and pine oil. The drug nanoemulgels were evaluated for their particle size, polydispersity index (PDI), rheological behaviour, drug release and anti-microbial activity.

Results

Based on the solubility test, pine oil was the best solubilising oil for both drugs, Tween 80 and Span 20 showed the highest solubilising ability for both the drugs among the surfactants; therefore, they were chosen as surfactant and co-surfactant, respectively. The optimum self-nanoemulsifying formulations showed a particle size for fusidic acid and Sodium fusidate of 140.58 nm and 151.86 nm respectively, and both showed a low PDI below 0.3. After incorporating both drug SNEDDS formulations with Carbopol at different concentrations, the results of the drugs particle size and PDI showed no significant difference. The zeta potential results for both drugs nanoemulgels showed a negative potential with more than 30 mV. All nanoemulgel formulations showed pseudo-plastic behaviour with the highest release pattern at 0.4% Carbopol. The antibacterial activity of both drug nanoemulgel formulations showed superiority over the market product.

Conclusion

Nanoemulgel is a promising delivery system for FA and SF that helps in improving the stability and antibacterial activities of the drugs.

Chronic exposure to complex metal oxide nanoparticles elicits rapid resistance in Shewanella oneidensis MR-1

Engineered nanoparticles are incorporated into numerous emerging technologies because of their unique physical and chemical properties. Many of these properties facilitate novel interactions, including both intentional and accidental effects on biological systems. Silver-containing particles are widely used as antimicrobial agents and recent evidence indicates that bacteria rapidly become resistant to these nanoparticles. Much less studied is the chronic exposure of bacteria to particles that were not designed to interact with microorganisms. For example, previous work has demonstrated that the lithium intercalated battery cathode nanosheet, nickel manganese cobalt oxide (NMC), is cytotoxic and causes a significant delay in growth of Shewanella oneidensis MR-1 upon acute exposure. Here, we report that S. oneidensis MR-1 rapidly adapts to chronic NMC exposure and is subsequently able to survive in much higher concentrations of these particles, providing the first evidence of permanent bacterial resistance following exposure to nanoparticles that were not intended as antibacterial agents. We also found that when NMC-adapted bacteria were subjected to only the metal ions released from this material, their specific growth rates were higher than when exposed to the nanoparticle. As such, we provide here the first demonstration of bacterial resistance to complex metal oxide nanoparticles with an adaptation mechanism that cannot be fully explained by multi-metal adaptation. Importantly, this adaptation persists even after the organism has been grown in pristine media for multiple generations, indicating that S. oneidensis MR-1 has developed permanent resistance to NMC.

Nitrogen-Doped Carbon Quantum Dots for Preventing Biofilm Formation and Eradicating Drug-Resistant Bacteria Infection

The development of novel antimicrobial agents is a top priority in the fight against drug-resistant bacteria. Here, we synthesized a green nanoantibiotic, nitrogen-doped carbon quantum dots (N-CQDs) from bis-quaternary ammonium salt (BQAS) as carbon and nitrogen sources. The as-obtained N-CQDs possess high antibacterial activity (>99%) against both methicillin-resistant Staphylococcus aureus (MRSA) and Ampicillin-resistant Escherichia coli bacteria in vitro than some known clinical antibiotics (vancomycin and gentamicin). The N-CQDs can kill MRSA pathogens without inducing resistance, prevent biofilm formation and eliminate established biofilm and persister cells. The treatment of N-CQDs can significantly reduce the amount of bacteria on the infected tissue and accelerate wound healing. The N-CQDs are positively charged, thus enabling them to interact with bacterial cell membrane through electrostatic interaction, leading to severe damage and an increased permeability of the cell membrane, which further promotes the penetration of N-CQDs into the membrane and induces the degradation of DNA by N-CQDs generated reactive oxygen species. The N-CQDs also play a role in obstructing the intracellular metabolic pathways of MRSA. The overall data demonstrate the green nanoantibiotic as an excellent eradicator of biofilm and persister cells as well as a promising antibacterial candidate for treating infections induced by drug-resistant bacteria.

Fabrication and a detailed study of antibacterial properties of α-Fe2O3/NiO nanocomposites along with their structural, optical, thermal, magnetic and cytotoxic features

Nanomaterials have specific properties which are uncommon in their bulk counterparts. Because of these unique characteristics, nanotechnology has been explored for various applications by the scientific community and it can play a crucial role in providing solutions of current major healthcare problems. In the present work, we describe the fabrication of a novel inorganic alternative of traditional antibiotics, which can effectively counter the pathogenic bacteria including multi drug resistant bacterial strains. For this purpose, nanocomposites of Fe/Ni oxide with different molar concentrations of nickel have been prepared via wet-chemical approach along with the α-Fe₂O₃ and NiO nanoparticles. The bactericidal efficiency of the prepared samples were tested against pathogenic strains of B. subtilis, S. aureus, E. coli and S. typhi using two distinct methods. In addition to this, structural, physical and chemical properties of the nanomaterials were studied using XRD, TEM, EDAX, Raman, VSM and TGA-DTA. Also, the cytotoxicity of synthesized samples was assessed using MTT assay against human cell lines MCF-10A (normal) and MCF7 (cancer).

Microbial Production of Violacein and Process Optimization for Dyeing Polyamide Fabrics With Acquired Antimicrobial Properties

In the present study, crude bacterial extract containing violacein is investigated for the preparation of antimicrobial polyamide fabrics. The optimal culture conditions of Janthinobacterium lividum (JL) for maximum biomass and violacein production were found to be 25°C, pH 7.0, while the addition of ampicillin of 0.2 mg mL^-1 in the small scale increased violacein production 1.3-fold. In scale-up trials, the addition of 1% (v/v) glycerol in a fed-batch bioreactor, resulted in fivefold extracted crude violacein increase with final concentration of 1.828 g L^-1. Polyamide 6.6 fabrics were dyed following three different processes; through simultaneous fermentation and dyeing (SFD), by incubating the fabric in the sonicated bacterial culture after fermentation and by using cell-free extract containing violacein. Maximum color change (ΔE) and color strength (K/S) obtained for SFD fabrics were 74.81 and 22.01, respectively, while no alteration of fastness and staining of dye at acid and alkaline perspiration or at water was indicated. The dyed fabrics presented significant antifungal activity against Candida albicans, C. parapsilosis, and C. krusei, as well as antibacterial properties against Escherichia coli, Staphylococcus aureus, and the S. aureus MRSA. We have shown that J. lividum cultures can be successfully used for violacein production and for simultaneous dying of fabrics resulting in dyed fabrics with antimicrobial properties without utilization of organic solvents.

Charged Metallopolymer-Grafted Silica Nanoparticles for Antimicrobial Applications

Inappropriate and frequent use of antibiotics has led to the development of antibiotic-resistant bacteria, which cause infectious diseases that are difficult to treat. With the rising threat of antibiotic resistance, the need to develop effective new antimicrobial agents is prominent. We report antimicrobial metallopolymer nanoparticles, which were prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization of a cobaltocenium-containing methacrylate monomer from silica nanoparticles. These particles are capable of forming a complex with β-lactam antibiotics, such as penicillin, rejuvenating the bactericidal activity of the antibiotic. Disk diffusion assays showed significantly increased antibacterial activities against both Gram-positive and Gram-negative bacteria. The improved efficiencies were attributed to the inhibition of hydrolysis of the β-lactam antibiotics and enhancement of local antibiotics concentration on a nanoparticle surface. In addition, hemolysis evaluations demonstrated minimal toxicity to red blood cells.

Antibacterial applications of α-Fe2O3/Co3O4 nanocomposites and study of their structural, optical, magnetic and cytotoxic characteristics

Owing to their multiple mechanisms of bactericidal activity, inorganic metal oxides and hybrid metal oxide nanocomposites may serve as a new class of effective disinfectants. Among metal oxide nanoparticles, iron oxide nanoparticles exhibit minimal or no cytotoxicity to human cells with very efficient bactericidal properties over a wide spectrum of bacteria. This paper presents the very first report on antibacterial properties of novel nanocomposites of iron oxide and cobalt oxide nanoparticles against pathogenic bacterial strains B. subtilis, S. aureus, E.coli and S. typhi. The enhanced bactericidal activity of the Fe/Co oxide nanocomposite was the result of synergistic effect of iron oxide and cobalt oxide nanoparticles. The nanocomposites were synthesized using co-precipitation route with increasing cobalt content in the sample and further characterized using XRD, TEM, Raman and VSM to investigate structural, optical and magnetic properties of the prepared nanocomposites, respectively. Also, the prepared nanocomposites were highly biocompatible and found non-toxic to human cell line MCF7.

Strategies to Combat Antibiotic Resistance in the Wastewater Treatment Plants

The main goal of this manuscript is to review different treatment strategies and mechanisms for combating the antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs) in the wastewater environment. The high amount of antibiotics is released into the wastewater that may promote selection of ARB and ARGs which find their way into natural environments. Emerging microbial pathogens and increasing antibiotic resistance among them is a global public health issue. The propagation and spread of ARB and ARGs in the environment may result in an increase of antibiotic resistant microbial pathogens which is a worldwide environmental and public health concern. A proper treatment of wastewater is essential before its discharge into rivers, lake, or sewage system to prevent the spread of ARB and ARGs into the environment. This review discusses various treatment options applied for combating the spread of ARB and ARGs in wastewater treatment plants (WWTPs). It was reported that low-energy anaerobic-aerobic treatment reactors, constructed wetlands, and disinfection processes have shown good removal efficiencies. Nanomaterials and biochar combined with other treatment methods and coagulation process are very recent strategies regarding ARB and ARGs removal and need more investigation and research. Based on current studies a wide-ranging removal efficiency of ARGs can be achieved depending on the type of genes present and treatment processes used, still, there are gaps that need to be further investigated. In order to find solutions to control dissemination of antibiotic resistance in the environment, it is important to (1) study innovative strategies in large scale and over a long time to reach an actual evaluation, (2) develop risk assessment studies to precisely understand occurrence and abundance of ARB/ARGs so that their potential risks to human health can be determined, and (3) consider operating and environmental factors that affect the efficiency of each treatment mechanism.

Factors pivotal for designing of nanoantimicrobials: an exposition

Understanding the interplay between bacterial pathogens and antimicrobials is a key to realize the control over infections causing morbidity and mortality. An important current issue of contemporary medicine and microbiology is the search for new strategies for adequate therapy of infectious diseases associated with rapidly emerging multidrug-resistant (MDR) pathogens. Recently, a great deal of progress has been made in the field of nanobiotechnology towards the development of various nanoantimicrobials (NAMs) as novel therapeutic solution. Current microbiological studies, employing either synthetic antibiotics or natural antimicrobial, have demonstrated the ability of NAMs to tackle the issue of MDR by reverting the mechanisms of resistance. The present review critically discusses the various factors that can contribute to modulate the effects of NAMs on microbes. It includes essential features of NAMs including but not limited to composition, surface charge, loading capacity, size, hydrophobicity/philicity, controlled release and functionalization. In contrast, how microbial structural differences, biofilm formation, persister cells and intracellular pathogens contribute towards sensitivity or resistance towards antimicrobials is comprehensively analysed. These multilateral factors should be considered earnestly in order to make NAMs a successful alternative of the conventional antibiotics.

pH-Controlled Cerium Oxide Nanoparticle Inhibition of Both Gram-Positive and Gram-Negative Bacteria Growth

Here, the antibacterial activity of dextran-coated nanoceria was examined against Pseudomonas aeruginosa and Staphylococcus epidermidis by varying the dose, the time of treatment, and the pH of the solution. Findings suggested that dextran-coated nanoceria particles were much more effective at killing P. aeruginosa and S. epidermidis at basic pH values (pH = 9) compared to acidic pH values (pH = 6) due to a smaller size and positive surface charge at pH 9. At pH 9, different particle concentrations did cause a delay in the growth of P. aeruginosa, whereas impressively S. epidermidis did not grow at all when treated with a 500 μg/mL nanoceria concentration for 24 hours. For both bacteria, a 2 log reduction and elevated amounts of reactive oxygen species (ROS) generation per colony were observed after 6 hours of treatment with nanoceria at pH 9 compared to untreated controls. After 6 hours of incubation with nanoceria at pH 9, P. aeruginosa showed drastic morphological changes as a result of cellular stress. In summary, this study provides significant evidence for the use of nanoceria (+4) for a wide range of anti-infection applications without resorting to the use of antibiotics, for which bacteria are developing a resistance towards anyway.

Natural selenium particles from Staphylococcus carnosus: Hazards or particles with particular promise?

Various bacteria, including diverse Staphylococci, reduce selenite to yield red selenium particles with diameters in the high nanometer to low micrometer range. Formation and accumulation of such particles in bacteria often results in cell death, triggered by a loss of thiols and formation of disruptive deposits inside the cell. Hence certain pathogenic bacteria are rather sensitive to the presence of selenite, whilst other organisms, such as small nematodes, do not employ this kind of nanotechnology, yet become affected by micromolar concentrations of such naturally generated materials. Selenium particles extracted from cultures of Staphylococcus carnosus and apparently stabilized by their natural protein coating, for instance, show considerable activity against the nematode Steinernema feltiae, Escherichia coli and Saccaromyces cerevisiae. Such natural nano- and micro-particles are also more active than mechanically generated selenium particles and may be applied as antimicrobial materials in Medicine and Agriculture.

Antimicrobial Nanomaterials Derived from Natural Products-A Review

Modern medicine has relied heavily on the availability of effective antibiotics to manage infections and enable invasive surgery. With the emergence of antibiotic-resistant bacteria, novel approaches are necessary to prevent the formation of biofilms on sensitive surfaces such as medical implants. Advances in nanotechnology have resulted in novel materials and the ability to create novel surface topographies. This review article provides an overview of advances in the fabrication of antimicrobial nanomaterials that are derived from biological polymers or that rely on the incorporation of natural compounds with antimicrobial activity in nanofibers made from synthetic materials. The availability of these novel materials will contribute to ensuring that the current level of medical care can be maintained as more bacteria are expected to develop resistance against existing antibiotics.

Ionic Conductivity as a Tool To Study Biocidal Activity of Sulfobetaine Micelles against Saccharomyces cerevisiae Model Cells

Zwitterionic sulfobetaine surfactants are used in pharmaceutical or biomedical applications for the solubilization and delivery of hydrophobic molecules in aqueous medium or in biological environments. In a screening on the biocidal activity of synthetic surfactants on microbial cells, remarkable results have emerged with sulfobetaine amphiphiles. The interaction between eight zwitterionic sulfobetaine amphiphiles and Saccharomyces cerevisiae model cells was therefore analyzed. S. cerevisiae yeast cells were chosen, as they are a widely used unicellular eukaryotic model organism in cell biology. Conductivity measurements were used to investigate the interaction between surfactant solution and cells. Viable counts measurements were performed, and the mortality data correlated with the conductivity profiles very well, in terms of the inflection points (IPs) observed in the curves and in terms of supramolecular properties of the aggregates. A Fourier transform infrared (FTIR)-based bioassay was then performed to determine the metabolomic stress-response of the cells subjected to the action of zwitterionic surfactants. The surfactants showed nodal concentration (IPs) with all the techniques in their activities, corresponding to the critical micellar concentrations of the amphiphiles. This is due to the pseudocationic behavior of sulfobetaine micelles, because of their charge distribution and charge densities. This behavior permits the interaction of the micellar aggregates with the cells, and the structure of the surfactant monomers has impact on the mortality and the metabolomic response data observed. On the other hand, the concentrations that are necessary to provoke a biocidal activity do not promote these amphiphiles as potential antimicrobial agents. In fact, they are much higher than the ones of cationic surfactants.

Synthesis of High Valence Silver-Loaded Mesoporous Silica with Strong Antibacterial Properties

A simple chemical method was developed for preparing high valence silver (Ag)-loaded mesoporous silica (Ag-ethylenediaminetetraacetic acid (EDTA)-SBA-15), which showed strong antibacterial activity. Ag-EDTA-SBA-15 exhibited stronger and more effective antibacterial activity than commercial Ag nanoparticles did, and it offered high stability of high valence silver in the porous matrix and long-lasting antibacterial activity. The synthesized materials were characterized using Fourier transform infrared spectroscopy, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) analysis, and transmission electron microscopy (TEM). Ag existed in both surface complexation and Ag particles. EDTA anchored within a porous structure chelated Ag ions in higher oxidation states and prevented their agglomeration and oxidation reduction. The XRD results showed that most Ag in the Ag-EDTA-SBA-15 existed in higher oxidation states such as Ag(II) and Ag(III). However, the XPS and TEM results showed that Ag easily reduced in lower oxidation states and agglomerated as Ag particles on the exterior layer of the SBA-15.

New paradigm shift for the green synthesis of antibacterial silver nanoparticles utilizing plant extracts

This review covers general information regarding the green synthesis of antibacterial silver nanoparticles. Owing to their antibacterial properties, silver nanoparticles are widely used in many areas, especially biomedical applications. In green synthesis practices, the chemical reducing agents are eliminated, and biological entities are utilized to convert silver ions to silver nanoparticles. Among the various biological entities, natural plant extracts have emerged as green reducing agents, providing eco-friendly routes for the preparation of silver nanomaterials. The most obvious merits of green synthesis are the increased biocompatibility of the resulting silver nanoparticles and the ease with which the reaction can be carried out. This review summarizes some of the plant extracts that are used to produce antibacterial silver nanoparticles. Additionally, background information regarding the green synthesis and antibacterial activity of silver nanoparticles is provided. Finally, the toxicological aspects of silver nanoparticles are briefly mentioned.

Oxidative stress and antibiotic resistance in bacterial pathogens: state of the art, methodologies, and future trends

Despite the significant advances of modern medicine and the availability of a wide variety of antibiotics for the treatment of microbial infections, there is an alarming increase of multiresistant bacterial pathogens. This chapter discusses the status of bacterial resistance mechanisms and the relationship with oxidative stress and provides an overview of the methods used to assess oxidative conditions and their contribution to the antibiotic resistance.