Compositional, Structural, and Kinetic Aspects of Lipid Digestion and Bioavailability: In Vitro, In Vivo, and Modeling Approaches

Lipid digestion and bioavailability are usually investigated separately, using different approaches (in vitro, modeling, in vivo). However, a few inclusive studies show that their kinetics are closely linked. Lipid bioavailability kinetics is likely involved in the development and evolution of several diseases, so lipid digestion kinetics could be involved as well and can be modulated by food design or combination. To illustrate this possibility, the compositional and structural aspects of lipid digestion kinetics, as investigated using in vitro and modeling approaches, are presented first. Then, in vivo and mixed approaches enabling the study of both kinetics are reviewed and discussed. Finally, disparate modeling approaches are introduced, and a unifying modeling scheme is proposed, opening new perspectives for understanding the role and interactions of various factors (chemical, physical, and biological) involved in lipid metabolism.

Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Advances in static in vitro digestion models after the COST action Infogest consensus protocol

In vitro digestion models are essential to predictively evaluate the bioaccessibility and bioactivity of food molecules or natural products. Dynamic models better simulate the gastrointestinal conditions as they reproduce similar physiological environments. Despite this, static methods, also known as biochemical methods, represent a simple and useful approach for the study of different types of molecules, with a broad applicability in the nutritional, pharmaceutical, and toxicological fields. In addition, static models can be validated, avoiding the disadvantage of a difficult reproducibility of dynamic in vitro systems and inter-individual variations of in vivo experiments. A crucial point in the standardization of static models was the COST Action Infogest in 2014, which elaborated an international consensus static digestion method to harmonize experimental conditions and has general guidelines, thus allowing the comparison of studies and data. The aim of our review is to underline the impact of the Infogest consensus method and the development and evolution of in vitro static methods in the following years, with a focus on food applications.

Physiological fluid interfaces: Functional microenvironments, drug delivery targets, and first line of defense

Fluid interfaces, i.e. the boundary layer of two liquids or a liquid and a gas, play a vital role in physiological processes as diverse as visual perception, oral health and taste, lipid metabolism, and pulmonary breathing. These fluid interfaces exhibit a complex composition, structure, and rheology tailored to their individual physiological functions. Advances in interfacial thin film techniques have facilitated the analysis of such complex interfaces under physiologically relevant conditions. This allowed new insights on the origin of their physiological functionality, how deviations may cause disease, and has revealed new therapy strategies. Furthermore, the interactions of physiological fluid interfaces with exogenous substances is crucial for understanding certain disorders and exploiting drug delivery routes to or across fluid interfaces. Here, we provide an overview on fluid interfaces with physiological relevance, namely tear films, interfacial aspects of saliva, lipid droplet digestion and storage in the cell, and the functioning of lung surfactant. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe therapies and drug delivery approaches targeted at fluid interfaces. STATEMENT OF SIGNIFICANCE: Fluid interfaces are inherent to all living organisms and play a vital role in various physiological processes. Examples are the eye tear film, saliva, lipid digestion & storage in cells, and pulmonary breathing. These fluid interfaces exhibit complex interfacial compositions and structures to meet their specific physiological function. We provide an overview on physiological fluid interfaces with a focus on interfacial phenomena. We elucidate their structure-function relationship, discuss diseases associated with interfacial composition, and describe novel therapies and drug delivery approaches targeted at fluid interfaces. This sets the scene for ocular, oral, or pulmonary surface engineering and drug delivery approaches.

In vitro bioaccessibility of fish oil-loaded hollow solid lipid micro- and nanoparticles

Fish oil-loaded hollow solid lipid micro- and nanoparticles were prepared by atomization of the CO2-expanded lipid mixture. The obtained particles were spherical and free-flowing with an average particle size of 6.9 μm. Fish oil loading efficiency was achieved at 92.3% (w/w). The in vitro digestive stability, lipid digestibility and EPA and DHA bioaccessibility of the fish oil-loaded particles were examined using an in vitro sequential digestion model. The mean particle diameter increased markedly after oral (15.2 μm) and gastric (32.4 μm) digestion and then decreased after the small intestinal stage (24.0 μm). Fish oil-loaded particles remained spherical and intact but mainly agglomerated on the top phase throughout the oral and gastric digestion. However, a mixed digesta was formed after the small intestinal digestion, which contained digested broken particle pieces, undigested fish oil-loaded particles, free fatty acids, monoacylglycerols and micelles. The extent of lipolysis was significantly increased for the 30% fish oil-loaded particles as compared to physical mixtures of empty hollow solid lipid particles or bulk FHSO and fish oil (p < 0.05). Moreover, EPA and DHA bioaccessibility was significantly improved from 9.7 to 18.2% with the 30% fish oil-loaded particles (p < 0.05).

Stability and in vitro simulated release characteristics of ultrasonically modified soybean lipophilic protein emulsion

Natural emulsifiers such as soybean lipophilic protein (SLP) show potential as delivery systems for hydrophobic bioactive components such as vitamin E; however, the solubility of SLP is limited by its high lipid content. This study evaluated the effects of various ultrasonic conditions on the structure and properties of SLP. Using an emulsion of modified SLP, the carrier properties and in vitro digestion and release properties for vitamin E were evaluated. Biochemical and spectroscopic analyses indicated that the ultrasonic treatment mainly changed the secondary and tertiary structures of SLP. Furthermore, appropriate ultrasonic conditions significantly improved the solubility and emulsifying properties of SLP, with the highest emulsion stability and SLP encapsulation efficiency obtained using an ultrasonic power of 240 W for 20 min. An in vitro digestion simulation revealed that the emulsion prepared by ultrasonic modification of SLP was an effective delivery system for vitamin E. In particular, the emulsion protected the biological activity of vitamin E while significantly increasing the rate of lipid digestion and the bioavailability of vitamin E. These results indicate that the ultrasonically modified SLP can be used to prepare a stable emulsion for encapsulating vitamin E, which provides a new approach for the delivery of hydrophobic bioactive components.

Microtechnological Tools to Achieve Sustainable Food Processes, Products, and Ingredients

One of the major challenges we face as humankind is supplying a growing world population with sufficient and healthy foods. Although from a worldwide perspective sufficient food is produced, locally, the situation can be dire. Furthermore, the production needs to be increased in a sustainable manner for future generations, which also implies prevention of food waste, and making better use of the available resources. How to contribute to this as food technologists is an ultimate question, especially since the tools that can investigate processes at relevant time scales, and dimensions, are lacking. Here we propose the use of microtechnology and show examples of how this has led to new insights in the fields of ingredient isolation (filtration), and emulsion/foam formation, which will ultimately lead to better-defined products. Furthermore, microfluidic tools have been applied for testing ingredient functionality, and for this, various examples are discussed that will expectedly contribute to making better use of more sustainably sourced starting materials (e.g., novel protein sources). This review will wrap up with a section in which we discuss future developments. We expect that it will be possible to link food properties to the effects that foods create in vivo. We thus expand the scope of this review that is technical in nature, toward physiological functionality, and ultimately to rational food design that is targeted to improve human health.

Bile salts in digestion and transport of lipids

Because of their unusual chemical structure, bile salts (BS) play a fundamental role in intestinal lipid digestion and transport. BS have a planar arrangement of hydrophobic and hydrophilic moieties, which enables the BS molecules to form peculiar self-assembled structures in aqueous solutions. This molecular arrangement also has an influence on specific interactions of BS with lipid molecules and other compounds of ingested food and digestive media. Those comprise the complex scenario in which lipolysis occurs. In this review, we discuss the BS synthesis, composition, bulk interactions and mode of action during lipid digestion and transport. We look specifically into surfactant-related functions of BS that affect lipolysis, such as interactions with dietary fibre and emulsifiers, the interfacial activity in facilitating lipase and colipase anchoring to the lipid substrate interface, and finally the role of BS in the intestinal transport of lipids. Unravelling the roles of BS in the processing of lipids in the gastrointestinal tract requires a detailed analysis of their interactions with different compounds. We provide an update on the most recent findings concerning two areas of BS involvement: lipolysis and intestinal transport. We first explore the interactions of BS with various dietary fibres and food emulsifiers in bulk and at interfaces, as these appear to be key aspects for understanding interactions with digestive media. Next, we explore the interactions of BS with components of the intestinal digestion environment, and the role of BS in displacing material from the oil-water interface and facilitating adsorption of lipase. We look into the process of desorption, solubilisation of lipolysis, products and formation of mixed micelles. Finally, the BS-driven interactions of colloidal particles with the small intestinal mucus layer are considered, providing new findings for the overall assessment of the role of BS in lipid digestion and intestinal transport. This review offers a unique compilation of well-established and most recent studies dealing with the interactions of BS with food emulsifiers, nanoparticles and dietary fibre, as well as with the luminal compounds of the gut, such as lipase-colipase, triglycerides and intestinal mucus. The combined analysis of these complex interactions may provide crucial information on the pattern and extent of lipid digestion. Such knowledge is important for controlling the uptake of dietary lipids or lipophilic pharmaceuticals in the gastrointestinal tract through the engineering of novel food structures or colloidal drug-delivery systems.

DHA rich algae oil delivered by O/W or gelled emulsions: strategies to increase its bioaccessibility

BACKGROUND

The bioaccessibility of bioactive compounds for functional food deserves evaluation. An in vitro gastrointestinal digestion model was applied to provide information about the extent of lipid hydrolysis, oxidative stability and bioaccessibility of algae oil (42% of docosahexaenoic acid; DHA), comparing three lipid delivery systems: bulk oil, soy protein stabilized O/W emulsion and carrageenan gelled emulsion.

RESULTS

Lipid digestion kinetics was slightly influenced by the delivery systems. Nevertheless, at the end of intestinal digestion, lipolysis in the three samples ranged between 49% and 52%, showing a partial oil digestion. Lipid oxidation, measured by malondialdehyde, was significantly lower (P < 0.01) in both emulsified oils after intestinal digestion compared to the bulk oil. Bioaccessibility of DHA was 58%, 71% and 84% for bulk oil, O/W emulsion and gelled emulsion, respectively.

CONCLUSION

These results suggest that both emulsified delivery systems used in the present study enhanced the solubilization of free fatty acids, in particular omega-3 fatty acids, and therefore their potential intestinal absorption. © 2018 Society of Chemical Industry.

An in vitro digestion method adapted for carotenoids and carotenoid esters: moving forward towards standardization

In vitro digestion methods are a useful approach to predict the bioaccessibility of food components and overcome some limitations or disadvantages associated with in vivo methodologies. Recently, the INFOGEST network published a static method of in vitro digestion with a proposal for assay standardization. The INFOGEST method is not specific for any food component; therefore, we aimed to adapt this method to assess the in vitro bioaccessibility of carotenoids and carotenoid esters in a model fruit (Byrsonima crassifolia). Two additional steps were coupled to the in vitro digestion procedure, centrifugation at 20 000g for the separation of the aqueous phase containing mixed micelles and exhaustive carotenoid extraction with an organic solvent. The effect of electrolytes, enzymes and bile acids on carotenoid micellarization and stability was also tested. The results were compared with those found with a simpler method that has already been used for carotenoid bioaccessibility analysis. These values were in the expected range for free carotenoids (5-29%), monoesters (9-26%) and diesters (4-28%). In general, the in vitro bioaccessibility of carotenoids assessed by the adapted INFOGEST method was significantly higher (p < 0.05) than those assessed by the simplest protocol, with or without the addition of simulated fluids. Although no trend was observed, differences in bioaccessibility values depended on the carotenoid form (free, monoester or diester), isomerization (Z/E) and the in vitro digestion protocol. To the best of our knowledge, it was the first time that a systematic identification of carotenoid esters by HPLC-DAD-MS/MS after in vitro digestion using the INFOGEST protocol was carried out.

Bioavailability of Nutrients and Micronutrients: Advances in Modeling and In Vitro Approaches

The bioavailability of food nutrients and microconstituents is recognized as a determinant factor for optimal health status. However, human and animal studies are expensive and limited by the large amount of potential food bioactive compounds. The search for alternatives is very active and raises many questions. On one hand, in vitro digestion systems are good candidates, but to date only bioaccessibility has been correctly assessed. To go further, to what degree should natural processes be reproduced? What techniques can be used to measure the changes in food properties and structures in situ in a noninvasive way? On the other hand, modeling approaches have good potential, but their development is time-consuming. What compromises should be done between food and physiology realism and computational ease? This review addresses these questions by identifying highly resolved analytical methods, detailed computer models and simulations, and the most promising dynamic in vitro systems.

Subphase exchange experiments with the pendant drop technique

INTRODUCTION

The development of the coaxial double capillary 15 years ago opened up the possibility to undertake accurate desorption and penetration studies of interfacial layers in the pendant drop technique. Drop and bubble methods offer several advantages with respect to other interfacial techniques. They allow a more stringent control of the environmental conditions, use smaller amounts of material and provide a much higher interface/volume ratio than in conventional Langmuir Troughs.

EXPERIMENTAL

The coaxial capillary was developed 15 years ago at the University of Granada as an accessory for the pendant drop surface film balance. It allows exchanging the subphase of the drop without disturbing the surface film and preserving the drop volume throughout the subphase exchange. Hence, this methodology enables one to carry out a great variety of interfacial studies well beyond the usual adsorption profiles. Penetration studies, sequential adsorption measurements, desorption kinetics, reversibility of adsorption and testing of enzymatic treatments on interfacial layers are amongst the principal applications. The coaxial capillary has been recently upgraded to a multi-exchange device which has boosted its applicability. It can be now used to address multilayer formation, create soft interfacial nano-composites such as membranes, polyelectrolyte assemblies and simulate in vitro digestion in a single droplet.

APPLICATIONS

This review aims to compile the experimental work done, using the pendant drop subphase exchange in the last decade, and how its use has provided new insights into the surface/interfacial properties of many different materials. Special emphasis is placed on recent work regarding simulation of in vitro digestion in order to address issues relating to metabolism degradation profiles. The use of this methodology when dealing with interfacial studies allows setting the foundations of interfacial engineering technology. Based on subphase exchange experiments, we aim to develop models for competitive adsorption of different compounds at the interface and build up layer-by-layer interfacial structures. Future challenges comprise the design of finely adjusted nanoengineering systems, based on multilayer assemblies with tailored functionalities, to match the application demand.

Nanoemulsion delivery systems for oil-soluble vitamins: Influence of carrier oil type on lipid digestion and vitamin D3 bioaccessibility

The influence of carrier oil type on the bioaccessibility of vitamin D3 encapsulated within oil-in-water nanoemulsions prepared using a natural surfactant (quillaja saponin) was studied using a simulated gastrointestinal tract (GIT) model: mouth; stomach; small intestine. The rate of free fatty acid release during lipid digestion decreased in the following order: medium chain triglycerides (MCT) > corn oil ≈ fish oil > orange oil > mineral oil. Conversely, the measured bioaccessibility of vitamin D3 decreased in the following order: corn oil ≈ fish oil > orange oil > mineral oil > MCT. These results show that carrier oil type has a considerable impact on lipid digestion and vitamin bioaccessibility, which was attributed to differences in the release of bioactives from lipid droplets, and their solubilization in mixed micelles. Nanoemulsions prepared using long chain triglycerides (corn or fish oil) were most effective at increasing vitamin bioaccessibility.

Usefulness of (1)H NMR in assessing the extent of lipid digestion

Proton Nuclear Magnetic Resonance ((1)H NMR) is proved to be, for the first time, a very useful technique in monitoring the extent of lipid hydrolysis in digestion processes. Sunflower oil and minced fish flesh, as model foods, were subjected to different in vitro digestion experiments and the lipolysis levels reached were evaluated using (1)H NMR spectral data. Simple observation of the spectra gives very valuable information about the extent of the lipolysis and enables a rapid discrimination among samples having different hydrolysis degree. Equations were developed to quantify all the lipolytic products, and either referred to acyl groups plus fatty acids, or to glyceryl structures. The main hydrolysis products were 1,2-diglycerides, 2-monoglycerides, glycerol and fatty acids, although small proportions of 1,3-diglycerides and of 1-monoglycerides were also found. With this methodology, determination of the extent of lipid digestion in its different definitions can be made. It has been shown that these definitions are not equivalent, which is evidence for the need for a consensus in this regard.

Refining in silico simulation to study digestion parameters affecting the bioaccessibility of lipophilic nutrients and micronutrients

A numerical study of more parameters influencing the gastro-intestinal digestion and bioaccessibility of lipophilic nutrients and micronutrients (the graphical abstract presents the gastric digestion).

Emulsification of algal oil with soy lecithin improved DHA bioaccessibility but did not change overall in vitro digestibility

Oil emulsification facilitates digestive lipolysis and subsequent lipid bioaccessibility. This study aimed to understand the effects of emulsification on DHA-rich algal oil digestion and bioaccessibility. An oil/water emulsion (50 : 44 : 6 oil-water-soy lecithin) was subjected to an in vitro digestion model with gastric pH 1.6 or 4.0 and particle size distributions, duodenal stage lipolysis and DHA bioaccessibility were determined. The emulsion was destabilized at gastric pH 1.6, with subsequent slow duodenal lipolysis. With gastric pH 4.0, the emulsion structure remained intact, initial lipolysis proceeded rapidly and DHA bioaccessibility was higher than for bulk oil, a mixture of oil, water and soy lecithin, and the gastric pH 1.6 destabilized emulsion (p < 0.05). However, the extent of lipolysis was not affected by emulsification or gastric pH. Therefore, the presence of an intact emulsion at the start of duodenal digestion, while not impacting the extent of lipolysis, did impact the initial lipolysis and DHA bioaccessibility.

A microfluidic device to study the digestion of trapped lipid droplets

Digestion of 140 μm lipid droplets generated and trapped in a microfluidic device, with continuous digestive juice renewal.