Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Nanoparticles-based therapeutics for the management of bacterial infections: A special emphasis on FDA approved products and clinical trials

Microbial resistance has increased in recent decades as a result of the extensive and indiscriminate use of antibiotics. The World Health Organization listed antimicrobial resistance as one of ten major global public health threats in 2021. In particular, six major bacterial pathogens, including third-generation cephalosporin-resistant Escherichia coli, methicillin-resistant Staphylococcus aureus, carbapenem-resistant Acinetobacter baumannii, Klebsiella pneumoniae, Streptococcus pneumoniae, and Pseudomonas aeruginosa, were found to have the highest resistance-related death rates in 2019. To respond to this urgent call, the creation of new pharmaceutical technologies based on nanoscience and drug delivery systems appears to be the promising strategy against microbial resistance in light of recent advancements, particularly the new knowledge of medicinal biology. Nanomaterials are often defined as substances having sizes between 1 and 100 nm. If the material is used on a small scale; its properties significantly change. They come in a variety of sizes and forms to help provide distinguishing characteristics for a wide range of functions. The field of health sciences has demonstrated a strong interest in numerous nanotechnology applications. Therefore, in this review, prospective nanotechnology-based therapeutics for the management of bacterial infections with multiple medication resistance are critically examined. Recent developments in these innovative treatment techniques are described, with an emphasis on preclinical, clinical, and combinatorial approaches.

Enhanced Antibacterial Activity through Silver Nanoparticles Deposited onto Carboxylated Graphene Oxide Surface

The strong bactericidal action of silver nanoparticles (AgNPs) is usually limited by their degree of aggregation. Deposition of AgNPs onto a graphene oxide (GO) surface to generate GO-Ag hybrids has been shown to be an effective method of controlling these aggregation problems. In this sense, a novel carboxylated graphene oxide–silver nanoparticle (GOCOOH-Ag) material has been synthesized, and their antibacterial and biofilm formation inhibitions have been studied. AgNPs decorating the GOCOOH surface achieved an average size of 6.74 ± 0.25 nm, which was smaller than that of AgNPs deposited onto the GO surface. In addition, better distribution of AgNPs was achieved using carboxylated material. It is important to highlight the main role of the carboxylic groups in the nucleation and growth of the AgNPs that decorate the GO-based material surface. In vitro antibacterial activity and antibiofilm-forming action were tested against Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Both GO-Ag and GOCOOH-Ag reduced bacterial growth, analyzed by time–kill curves. However, the minimum inhibitory concentration and the minimum bactericidal concentration of GOCOOH-Ag were lower than those of GO-Ag for all strains studied, indicating that GOCOOH-Ag has better antibacterial activity. In addition, both nanomaterials prevent biofilm formation, with a higher reduction of biofilm mass and cell viability in the presence of GOCOOH-Ag. The carboxylation functionalization in GO-based materials can be applied to improve the bactericidal and antibiofilm-forming action of the AgNPs.

Phytomediated Photo-Induced Green Synthesis of Silver Nanoparticles Using Matricaria chamomilla L. and Its Catalytic Activity against Rhodamine B

The bio-fabrication of silver nanoparticles (AgNPs) was carried out through the facile green route, using the aqueous extract of Matricaria chamomilla L. Herein, we have developed a cost-efficient, ecofriendly, and photo-induced method for the biomolecule-assisted synthesis of AgNPs using an aqueous extract of Matricaria chamomilla L. as a bio-reducing and capping/stabilizing agent. The biomolecule-capped AgNPs were confirmed from the surface plasmon resonance (SPR) band at λmax = 450 nm using a UV-visible spectrometer. The stability of the AgNPs was confirmed by recording the UV-visible spectra for a more extended period, and no precipitation was observed in the sol. The morphology and structure of photo-induced biomolecule-capped AgNPs were characterized by different microscopic and spectroscopy techniques such as TEM, SEM, EDX, XRD, and FTIR analysis. The role of phytochemicals as reducing and stabilizing agents was confirmed by comparative FTIR analysis of the AgNPs and pure Matricaria chamomilla L. aqueous extract. The obtained result shows that the AgNPs are mostly spherical morphology with an average size of about 26 nm. Furthermore, the thermal stability of biomolecule-capped AgNPs was examined by TGA-DTG analysis that showed a weight loss of approximately 36.63% up to 800 °C. Moreover, the potential photocatalytic activity of photo-induced AgNPs against Rhodamine B (RB) was examined in the presence of UV light irradiation. The catalyst reusability, the effect of catalyst dosage and initial dye concentration, and the effect of the temperature and pH of the reaction medium were also assessed.

Effective Biocidal and Wound Healing Cogency of Biocompatible Glutathione: Citrate-Capped Copper Oxide Nanoparticles Against Multidrug-Resistant Pathogenic Enterobacteria

Multidrug-resistant (MDR) superficial bacterial infections caused by carbapenem-resistant Enterobacter sp. and Klebsiella sp. have emerged as major threats toward global health care management. In search of a novel antimicrobial, our main objectives were to explore the antimicrobial, antibiofilm, and wound healing potential of glutathione and citrate-capped copper oxide nanoparticles (CuNPs) against gram-negative MDR pathogens Klebsiella quasipneumoniae and Enterobacter sp., ensuring the lowest possible host cell nano-cytotoxicity and minimum susceptibility of the CuNPs toward oxidation. The CuNPs were found to elicit reactive oxygen species (ROS) generation within bacterial cells, inhibiting the bacterial growth and division. They contributed to the remodeling of the bacterial lipopolysaccharide, induced membrane lysis, and promoted antibiofilm activities by reduced cell-cell aggregation and matrix destabilization while displaying excellent biocompatibility against HEK-293 and HeLa cell lines. The CuNPs were also instrumental in preventing postsurgical wound infections and aiding in wound closure in the murine excisional wound model, as observed in albino Wistar rats, forcing us to believe that the CuNPs are bioactive in wound therapy. The results are encouraging and demands further experimental exploitation of the particles in treating other MDR gram-negative infections, irrespective of their resistance status.

Combating Antibiotic-Resistant Gram-Negative Bacteria Strains with Tetracycline-Conjugated Carbon Nanoparticles

Nontoxic carbon nanoparticle samples prepared by both bottom-up and top-down approaches do not inhibit Gram-negative bacterial growth, indicating excellent biocompatibilities. However, cell growth inhibitory efficacies increase considerably when the carbon nanoparticles are conjugated with the antibiotic tetracycline. In tetracycline-resistant bacteria, these efficacies can approach tenfold higher activities when compared to tetracycline alone. No structural abnormality such as membrane disruptions is evident in the tested bacterial strains; this is in contrast with other nanocarbon systems such as graphene oxides, carbon nanotubes, and amine-functionalized carbon nanoparticles which do exhibit membrane disruptions. In comparison, the tetracycline-conjugated carbon nanoparticles induce membrane perturbations (but not membrane disruptions), inhibiting bacterial efflux mechanisms. It is proposed that when tetracycline is conjugated to the surface of carbon nanoparticles, it functions to direct the nanoparticles to membrane-associated tetracycline efflux pumps, thereby blocking and subsequently inhibiting their function. The conjugation between biocompatible carbon nanoparticles and subtherapeutic but well-established antibiotic molecules may provide hybrid antibiotic assembly strategies resulting in effective multidrug efflux inhibition for combating antibiotic resistance.

Optimizing the synthesis of SnO2/TiO2/RGO nanocomposites with excellent visible light photocatalytic and antibacterial activities

Multifunctional SnO₂/TiO₂/RGO nanocomposites with enhanced photocatalytic degradation and antibacterial activity have been successfully synthesized by a facile one-pot environmentally friendly green hydrothermal route using titanium tetrabutoxide (TBOT), Na₂SnO₃ and graphene oxide (GO) without reducing agents and any structure-directing agents. The results demonstrate that the reaction pH conditions play important roles in the control of the crystallographic phases of TiO₂ and SnO₂. In addition, the visible-light-active photocatalytic and antibacterial activities of the synthesized composites were measured for the degradation of rhodamine B (RhB) and the growth inhibition of the Gram-negative bacteria Escherichia coli (E. coli), which are strongly affected by the SnO₂ loading content, the crystal structure of TiO₂ and the appropriate addition of graphene. The superior photocatalytic and antibacterial activities of the nanocomposites were attributed to their great optical adsorption capability and excellent charge separation and transfer efficiency. This study may provide new insights into the fabrication of efficient visible-light-active SnO₂/TiO₂/RGO nanocomposites and expand their applications in the environmental remediation and water disinfection fields.

Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies

The rise of antibiotic-resistant microorganisms has become a critical issue in recent years and has promoted substantial research efforts directed to the development of more effective antimicrobial therapies utilizing different bactericidal mechanisms to neutralize infectious diseases. Modern approaches employ at least two mixed bioactive agents to enhance bactericidal effects. However, the combinations of drugs may not always show a synergistic effect, and further, could also produce adverse effects or stimulate negative outcomes. Therefore, investigations providing insights into the effective utilization of combinations of biocidal agents are of great interest. Sometimes, combination therapy is needed to avoid resistance development in difficult-to-treat infections or biofilm-associated infections treated with common biocides. Thus, this contribution reviews the literature reports discussing the usage of antimicrobial polymers along with nanomaterials or other inhibitors for the development of more potent biocidal therapies.

Designing Melittin-Graphene Hybrid Complexes for Enhanced Antibacterial Activity

Antimicrobial peptides (AMPs) promise a fundamental solution to the devastating threat of drug-resistant bacteria. However, drawbacks of AMPs (e.g., poor cell membrane penetration efficiency) seriously block their clinical use. In this work, rational design of a hybrid complex of melittin (as a representative AMP) and graphene or graphene oxide (Gra or GO) nanosheets for enhanced antibacterial ability is achieved, via combining in-silico prediction and in-tube test. In comparison to pristine melittin, the specifically designed AMP-Gra (/GO) complex exhibits remarkable efficiency in transmembrane perforation with an over tenfold decrease in the threshold working concentration of peptide; moreover, it has an up to 20-fold enhancement in antibacterial activity against both Gram-negative and Gram-positive bacteria. Such improvement is ascribed to the synergetic insertion of nanosheets and melittin due to similarity in antibacterial mechanism between them and is further regulated by the structural factors of the complex, including the intersheet spacing and surface functionalization of the Gra/GO sheets, etc. These results provide practical guidelines to engineer AMPs with nanotechnology for improved antimicrobial performances, especially based on targeted functionalization of the Gra/GO nanosheets.

Novel Candy-like Cu4O3 Microstructure: Facile Wet Chemical Synthesis, Formation Mechanism, and Good Long-Term Antibacterial Activities

The novel candy-like Cu₄O₃ microstructure has been synthesized successfully for the first time by a facile wet chemical method, and the formation mechanism was studied based on series of control experiments. The antibacterial activities of the candy-like Cu₄O₃ were evaluated by means of Gram-negative Escherichia coli ( E. coli) and Gram-positive Staphylococcus saureus ( S. aureus). The antibacterial mechanism was investigated by tracing the morphology evolution of the bacteria. The results show that the candy-like Cu₄O₃ microstructure was formed underwent the route of Cu(NH₃)₄²⁺ → Cu(OH)₄^2- → Cu(OH)₂ → CuO → Cu₄O₃ nuclei → Cu₄O₃ crystal growth → candy-like Cu₄O₃, and optimal reaction conditions are required to obtain the candy-like Cu₄O₃. The candy-like Cu₄O₃ microstructure exhibits good long-term antibacterial activities to both E. coli and S. aureus bacteria. Critical concentration of Cu²⁺ ions released from the candy-like Cu₄O₃ was found responsible for the sudden increase beyond 90% in antibacterial activity.

Effect of Morphology and Concentration on Crossover between Antioxidant and Pro-oxidant Activity of MgO Nanostructures

The toxicity of nanomaterials can sometimes be attributed to photogenerated reactive oxygen species (ROS), but these ROS can also be scavenged by nanomaterials, yielding opportunities for crossover between the properties. The morphology of nanomaterials also influences such features due to defect-induced properties. Here we report morphology-induced crossover between pro-oxidant activity (ROS generation) and antioxidant activity (ROS scavenging) of MgO. To study this process in detail, we prepared three different nanostructures of MgO (nanoparticles, nanoplates, and nanorods) and characterized them by HRTEM. These three nanostructures effectively generate superoxide anions (O₂^•-) and hydroxyl radicals (^•OH) at higher concentrations (>500 μg/mL) but scavenge O₂^•- at lower concentrations (40 μg/mL) with successful crossover at 200 μg/mL. Nanorods of MgO generate the highest levels of O₂^•-, whereas nanoparticles scavenge O₂^•- to the highest extent (60%). Photoluminescence studies reveal that such crossover is based on the suppression of F²⁺ and the evolution of F⁺, F₂⁺, and F₂³⁺ defect centers. The evolution of these defect centers reflects the antibacterial activity of MgO nanostructures which is initiated at 200 μg/mL against Gram-positive S. aureus ATCC 29737 and among different bacterial strains including Gram-positive B. subtilis ATCC 6633 and M. luteus ATCC 10240 and Gram-negative E. coli ATCC K88 and K. pneumoniae ATCC 10031. Nanoparticles exhibited the highest antibacterial (92%) and antibiofilm activity (17%) against B. subtilis ATCC 6633 in the dark. Interestingly, the nitrogen-centered free radical DPPH is scavenged (100%) by nanoplates due to its large surface area (342.2 m²/g) and the presence of the F₂⁺ defect state. The concentration-dependent interaction with an antioxidant defense system (ascorbic acid (AA)) highlights nanoparticles as potent scavengers of O₂^•- in the dark. Thus, our findings establish guidelines for the selection of MgO nanostructures for diverse therapeutic applications.

Reducing Bacterial Infections and Biofilm Formation Using Nanoparticles and Nanostructured Antibacterial Surfaces

With the rapid spreading of resistance among common bacterial pathogens, bacterial infections, especially antibiotic-resistant bacterial infections, have drawn much attention worldwide. In light of this, nanoparticles, including metal and metal oxide nanoparticles, liposomes, polymersomes, and solid lipid nanoparticles, have been increasingly exploited as both efficient antimicrobials themselves or as delivery platforms to enhance the effectiveness of existing antibiotics. In addition to the emergence of widespread antibiotic resistance, of equal concern are implantable device-associated infections, which result from bacterial adhesion and subsequent biofilm formation at the site of implantation. The ineffectiveness of conventional antibiotics against these biofilms often leads to revision surgery, which is both debilitating to the patient and expensive. Toward this end, micro- and nanotopographies, especially those that resemble natural surfaces, and nonfouling chemistries represent a promising combination for long-term antibacterial activity. Collectively, the use of nanoparticles and nanostructured surfaces to combat bacterial growth and infections is a promising solution to the growing problem of antibiotic resistance and biofilm-related device infections.

Facile synthesis of hierarchical nickel (III) oxide nanostructure: A synergistic remediating action towards water contaminants

Heavy metal ion removal from consumable water is an indispensable need to maintain healthy life. Therefore cost effective and highly efficient sorbents are strongly needed to pose threat to real water pollution. Nanomaterials are widely used to maintain clean aqueous system in a very cost effective way with high removal efficiency. In this present work, pure coral like Ni₂O₃ nanostructures were prescribed for Cr(VI) remediation which were prepared by two step synthesis procedure at room temperature. The single hierarchical morphology as confirmed from HRTEM (size∼200 nm) were subjected to toxic Cr(VI) ion removal experiments. They were found to remove ∼65% Cr(VI) ions that was higher than that of pure Ni₂O₃ nanoparticles of comparable size. The enhanced properties were explained on the basis of the defect states present within the nanostructure, investigated by positron annihilation lifetime spectroscopy (PALS). It was found that the hierarchical nanostructure had more number of di-vacancies and vacancy-clusters as compared to the particles. On performing isotherm fitting, it was found that the coral like morphology had a high heterogeneity factor that aided to a high adsorption rate when compared to the pure Ni₂O₃ nanoparticles (which had a homogenous surface). The synthesized nanostructure was severely toxic to bacterial community having minimum inhibitory concentration (MIC) of ∼300 μg/L. Also the nanostructure exhibited dual functionality towards Cr(VI) and bacteria contaminated water at 200 μg/ml. The maximum Cr(VI) removal efficiency for this dual system is found to be 39% whereas antibacterial activity was turned out to be 30% which was extensively higher than that of toxic Cr(VI) ions. A plausible mechanism for the dual functionality was also predicted.

Mechanistic Insight into Size-Dependent Enhanced Cytotoxicity of Industrial Antibacterial Titanium Oxide Nanoparticles on Colon Cells Because of Reactive Oxygen Species Quenching and Neutral Lipid Alteration

This study evaluates the impact of industrially prepared TiO2 nanoparticles on the biological system by using an in vitro model of colon cancer cell lines (HCT116). Industrial synthesis of titanium oxide nanoparticles was mimicked on the lab scale by the high-energy ball milling method by milling bulk titanium oxide particles for 5, 10, and 15 h in an ambient environment. The physiochemical characterization by field emission scanning electron microscopy, dynamic light scattering, and UV-visible spectroscopy revealed alteration in the size and surface charge with respect to increase in the milling time. The size was found to be reduced to 82 ± 14, 66 ± 12, and 42 ± 10 nm in 5, 10, and 15 h milled nano TiO2 from 105 ± 12 nm of bulk TiO2, whereas the zeta potential increased along with the milling time in all biological media. Cytotoxicity and genotoxicity assays performed with HCT116 cell lines by MTT assay, oxidative stress, intracellular lipid analysis, apoptosis, and cell cycle estimation depicted cytotoxicity as a consequence of reactive oxygen species quenching and lipid accumulation, inducing significant apoptosis and genotoxic cytotoxicity. In silico analysis depicted the role of Sod1, Sod2, p53, and VLDR proteins-TiO2 hydrogen bond interaction having a key role in determining the cytotoxicity. The particles exhibited significant antibacterial activities against Escherichia coli and Salmonella typhimurium.

Study of Graphene Oxide Structural Features for Catalytic, Antibacterial, Gas Sensing, and Metals Decontamination Environmental Applications

This study represents a comprehensive review about the structural features of graphene oxide (GO) and its significance in environmental applications. Two dimensional (2D) GO is tremendously focused in advanced carbon-based nanomaterials for environmental applications due to its tunable physicochemical characteristics. Herein, we report foundational structural models of GO and explore the chemical bonding of oxygen moieties, with graphite basal plane using various characterization tools. Moreover, the impact of these oxygen moieties and the morphology of GO for environmental applications such as removal of metal ions and catalytic, antibacterial, and gas sensing abilities have here been critically reviewed for the first time. Environmental applications of GO are highly significant because, in the recent era, the fast progress of industries, even in the countryside, results in air and water pollution. GO has been widely investigated by researchers to eradicate such environmental issues and for potential industrial and clinical applications due to its 2D structural features, large surface area, presence of oxygen moieties, nonconductive nature, intense mechanical strength, excellent water dispersibility, and tunable optoelectronic properties. Thence, particular emphasis is directed toward the modification of GO by varying the number of its oxygen functional groups and by coupling it with other exotic nanomaterials to induce unique properties in GO for potential environmental remediation purposes.

1D Cu@Ni nanorods anchored on 2D reduced graphene oxide with interfacial engineering to enhance microwave absorption properties

In this work, one-dimensional core–shell Cu@Ni nanorods which were anchored on two dimensional reduced graphene oxide (rGO) heterostructures were successfully prepared by a simple co-reduction method.

Fabrication and characterization of nanocomposite film made from a jackfruit filum polysaccharide incorporating TiO2nanoparticles by photocatalysis

Jackfruit filum polysaccharide (JFPS) was extracted and confirmed to contain neutral and acidic polysaccharides, largely composed of acidic polysaccharides.

Antibacterial properties of nanostructured Cu–TiO2surfaces for dental implants

The influence of copper derived TiO₂surfaces (nCu–nT-TiO₂) on the death of nosocomialStaphylococcus aureus(Sa) andEscherichia coli(Ec), was investigated.

Photo-induced biosynthesis of silver nanoparticles from aqueous extract of Dunaliella salina and their anticancer potential

The synthesis of silver nanoparticles (AgNPs) via green route, using biological entities is an area of interest, because one of the potential applications in the nanomedicine. In the present study, we have developed photo-induced, ecofriendly, low cost method for biosynthesis of the stable silver nanoparticles using aqueous extract of Dunaliella salina (AED) which act as both reducing as well as stabilizing agent. Biosynthesis of the AgNPs was optimized as: sunlight exposure (30min), AED (5% (v/v)) and AgNO₃ (4mM). Biosynthesis of AgNPs was monitored by using UV-Vis spectroscopy which exhibited sharp SPR band at 430nm after 30min of bright sunlight exposure. SEM and TEM analyses confirmed the presence of spherical AgNPs with average size of 15.26nm. Crystalline nature of AgNPs was confirmed by SAED and XRD analyses where Braggs reflection pattern at (111), (200), (220) and (311) corresponded to face centered cubic crystal lattice of metallic silver. FTIR analysis revealed the involvement of various functional groups present in AED. AFM analysis confirmed the average surface roughness of synthesized AgNPs as 8.48nm. AgNPs were also screened for anticancer potential using assay of calcein AM/PI, Annexin/PI and cancer biomarkers against cancer cell line (MCF-7), while normal cell line (MCF-10A) were kept as control. Interestingly, anticancer potential was comparable to the known anticancer drug (Cisplatin), and was not detrimental to the normal cell line. Therefore, such green synthesized AgNPs may be explored as anticancer agent.

ZnO quantum dots modified bioactive glass nanoparticles with pH-sensitive release of Zn ions, fluorescence, antibacterial and osteogenic properties

Zinc (Zn)-containing materials have osteogenic and antibacterial activities while bioactive glass nanoparticles (BGN) show bone-bonding ability, as well as osteoconductive and osteoinductive properties. Zn-containing BGN are therefore considered to be promising materials for various biomedical applications, particularly in bone regeneration. In this study, we report a convenient method to prepare Zn-containing BGN by coating ZnO quantum dots (QDs) on BGN via electrostatic interactions. The synthesized ZnO-BGN nanocomposite particles are spherical and highly dispersed, and exhibit a unique fluorescence behavior under UV excitation, emitting three wavelengths in the violet, blue and green range. ZnO-BGN showed apatite-forming ability upon immersion in simulated body fluid, but their apatite formation was delayed compared to BGN. Interestingly, ZnO-BGN showed a rapid release of Zn ions at pH 4 but a far slower release at pH 7.4. ZnO-BGN also exhibited antibacterial effects on both Gram-positive and Gram-negative bacteria at the concentrations of 1, 0.1, and 0.01 mg mL^-1. Higher concentrations could lead to stronger antibacterial effects. The LDH and live/dead assays indicated that ZnO-BGN had no significant cytotoxicity towards human mesenchymal stem cells (hMSC) at concentration of 0.1 and 0.01 mg mL^-1, but ZnO-BGN inhibited the relative proliferation of hMSC compared to BGN and the control according to the MTT assay. Notably ZnO-BGN improved the osteogenic differentiation of hMSC as indicated by the determination of the alkaline phosphatase activity. In conclusion, coating quantum dots on BGN is a promising strategy to produce Zn-containing BGN. The synthesized ZnO-BGN are potential materials for bone regeneration, considering their apatite-forming ability, unique ion-release behavior, effective antibacterial activity, non-cytotoxicity, and osteogenic potential.

Photo-mediated optimized synthesis of silver nanoparticles for the selective detection of Iron(III), antibacterial and antioxidant activity

The AgNPs synthesized by green method have shown great potential in several applications such as biosensing, biomedical, catalysis, electronic etc. The present study deals with the selective colorimetric detection of Fe³⁺ using photoinduced green synthesized AgNPs. For the synthesis purpose, an aqueous extract of Croton bonplandianum (AEC) was used as a reducing and stabilizing agent. The biosynthesis was confirmed by UV-visible spectroscopy where an SPR band at λ_max 436nm after 40s and 428nm after 30min corresponded to the existence of AgNPs. The optimum conditions for biosynthesis of AgNPs were 30min sunlight exposure time, 5.0% (v/v) AEC inoculum dose and 4mM AgNO₃ concentration. The stability of synthesized AgNPs was monitored up to 9months. The size and shape of AgNPs with average size 19.4nm were determined by Field Emission Scanning Electron Microscope (FE-SEM) and High-Resolution Transmission Electron Microscope (HR-TEM). The crystallinity was determined by High-Resolution X-ray Diffractometer (HR-XRD) and Selected Area Electron Diffraction (SAED) pattern. The chemical and elemental compositions were determined by Fourier Transformed Infrared Spectroscopy (FTIR) and Energy Dispersive X-ray Spectroscopy (EDX) respectively. The Atomic Force Microscopy (AFM) images represented the lateral and 3D topological characteristics of AgNPs. The XPS analysis confirmed the presence of two individual peaks which attributed to the Ag 3d3/2 and Ag 3d5/2 binding energies corresponding to the presence of metallic silver. The biosynthesized AgNPs showed potent antibacterial activity against both gram-positive and gram-negative bacterial strains as well as antioxidant activity. On the basis of results and facts, a probable mechanism was also proposed to explore the possible route of AgNPs synthesis, colorimetric detection of Fe³⁺, antibacterial and antioxidant activity.

Photoinduced green synthesis of silver nanoparticles with highly effective antibacterial and hydrogen peroxide sensing properties

In this study, an eco-friendly and sustainable green route was employed for the synthesis of stable silver nanoparticles (AgNPs) using aqueous leaf extract of Euphorbia hirta (AEE) as both reducing as well as a stabilizing agent. The synthesis of AgNPs was confirmed by UV-visible spectroscopy which produced a prominent SPR band at λmax 425nm after 25min of sunlight exposure. The AgNPs thus synthesized were optimized using one factor at a time approach, and these optimized conditions were 25min of sunlight exposure time, 5.0% (v/v) of AEE inoculum dose and 3.0mM of AgNO3 concentration. The Field Emission Scanning Electron Microscopy (FE-SEM) and High Resolution Transmission Electron Microscopy (HRTEM) analysis confirmed the presence of spherical AgNPs with average size 15.5nm. The crystallinity was determined by X-ray Diffractometer (XRD) and Selected Area Electron Diffraction (SAED) pattern. Chemical and elemental compositions were determined by Fourier Transformed Infrared Spectroscopy (FTIR) and Energy Dispersive X-ray Spectroscopy (EDX) respectively. The Atomic Force Microscopy (AFM) images with average roughness 1.15nm represented the lateral and 3D topological characteristic of AgNPs. The AgNPs thus synthesized showed effective antibacterial activity against gram negative and gram positive bacteria as well as hydrogen peroxide sensing property with a minimum detection limit of 10(-7)M.

In vitro study on an antibacterial Ti-5Cu alloy for medical application

Health of human beings is subjected to severe threats from the spread of harmful bacteria and the implant-associated infection remains a serious problem in clinic. In this study, a copper-bearing antibacterial titanium alloy, Ti-5Cu, has been developed for dental and orthopedic implant applications. The microstructure, mechanical property, electrochemical corrosion behavior, in vitro antibacterial performance, cytocompatibility and hemocompatibility of the alloy are systematically investigated. The results reveal that the Ti-5Cu alloy which consists of α-phase matrix and intermetallic compound Ti2Cu not only possesses strong antibacterial activity against both E. coli and S. aureus, but also exhibits better mechanical properties than the commercial pure titanium. It is confirmed that the release of trace amount of Cu ions from the alloy plays an important role in killing bacteria. In spite of the ion release, Ti-5Cu alloy still reveals excellent corrosion resistance. Moreover, good cytocompatibility and superior hemocompatibility make Ti-5Cu alloy to be a potential solution that could prevent the peri-implant infection in dental and orthopaedic applications.

Synthesis of Monodispersed Ag-Doped Bioactive Glass Nanoparticles via Surface Modification

Monodispersed spherical Ag-doped bioactive glass nanoparticles (Ag-BGNs) were synthesized by a modified Stöber method combined with surface modification. The surface modification was carried out at 25, 60, and 80 °C, respectively, to investigate the influence of processing temperature on particle properties. Energy-dispersive X-ray spectroscopy (EDS) results indicated that higher temperatures facilitate the incorporation of Ag. Hydroxyapatite (HA) formation on Ag-BGNs was detected upon immersion of the particles in simulated body fluid for 7 days, which indicated that Ag-BGNs maintained high bioactivity after surface modification. The conducted antibacterial assay confirmed that Ag-BGNs had an antibacterial effect on E. coli. The above results thereby suggest that surface modification is an effective way to incorporate Ag into BGNs and that the modified BGNs can remain monodispersed as well as exhibit bioactivity and antibacterial capability for biomedical applications.

Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys against Staphylococcus aureus

The antibacterial mechanism of the Cu-containing materials has not been fully understood although such understanding is crucial for the sustained clinical use of Cu-containing antibacterial materials such as bone implants. The aim of this study is to investigate the molecular mechanisms by which the Gram-positive Staphylococcus aureus is inactivated through Cu-bearing titanium alloys (Ti6Al4V5Cu). Cu ions released from the alloys are found to contribute to lethal damage of bacteria. They destroy the permeability of the bacterial membranes, resulting in the leakage of reducing sugars and proteins from the cells. They also promote the generation of bacteria-killing reactive oxygen species (ROS). The ROS production is confirmed by several assays including fluorescent staining of intracellular oxidative stress, detection of respiratory chain activity, and measurement of the levels of lipid peroxidation, catalase, and glutathione. Furthermore, the released Cu ions show obvious genetic toxicity by interfering the replication of nuc (species-specific) and 16SrRNA genes, but with no effect on the genome integrity. All of these effects lead to the antibacterial effect of Ti6Al4V5Cu. Collectively, our work reconciles the conflicting antibacterial mechanisms of Cu-bearing metallic materials or nanoparticles reported in the literature and highlights the potential use of Ti6Al4V5Cu alloys in inhibiting bacterial infections.

La2O3 nanoparticle/polyacrylonitrile nanofibers for bacterial inactivation based on phosphate control

La₂O₃ nanoparticle-doped PAN nanofiber mats were prepared by an electrospinning process.

Self-assembly, doxorubicin-loading and antibacterial activity of well-defined ABA-type amphiphilic poly(N-vinylpyrrolidone)-b-poly(d,l-lactide)-b-poly(N-vinyl pyrrolidone) triblock copolymers

Synthesis, self-assembly, DOX-loading and antibacterial activity of well-defined ABA-type amphiphilic poly(N-vinylpyrrolidone)-b-poly(d,l-lactide)-b-poly(N-vinylpyrrolidone) triblock copolymers.

Fabrication of AgBr nanomaterials as excellent antibacterial agents

The excellent disinfection properties of AgBr nanocubes are due to the “dual-punch” of Ag ions induced disturbance to bio-function and AgBr nanocube-induced damage to cellular structure.

Enhanced catalytic and antibacterial activities of silver nanoparticles immobilized on poly(N-vinyl pyrrolidone)-grafted graphene oxide

PNVP grafted on GO regulates the size of Ag nanoparticles and enhances the catalytic and antibacterial properties along with increase in the dispersibility of GO.

Preparation of graphene oxide with silver nanowires to enhance antibacterial properties and cell compatibility

Ag NWs were evenly distributed on the surface of graphene oxide sheets via a hydrothermal method. The prepared composites exhibited an enhanced antibacterial effect and good cell compatibility.

A ZnO decorated chitosan–graphene oxide nanocomposite shows significantly enhanced antimicrobial activity with ROS generation

The rise in antimicrobial resistance requires the development of new antibacterial agents.