Near-infrared light to heat conversion in peroxydisulfate activation with MoS2: A new photo-activation process for water treatment

The advantage of light-to-heat conversion can be employed as an optical alternative for environmental remediation. As a proof of concept, for the first time we introduce the light-to-heat conversion application in peroxydisulfate (PDS) activation by molybdenum disulphide (MoS₂) under near infrared (NIR) light irradiation. Theoretical kinetics analysis suggests that the reaction rates of PDS activation is increased up to 9.2 times when increasing from room temperature to 50 °C. MoS₂ has the capability to quickly convert NIR light to heat energy (~45°C), thereby being able to activate PDS to generate hydroxyl and sulfate radicals. The observed reaction rate of carbamazepine degradation by NIR/MoS₂/PDS process is 6.5 times of that in MoS₂/PDS and even 2.6 times higher than the sum of those in NIR/MoS₂, MoS₂/PDS and NIR/PDS processes. Combining with theoretical calculation and oxidation species analysis, a new photo-activation PDS mechanism is proposed, in which MoS₂ absorbs the energy of light to generate heat energy for overcoming the energy barrier of PDS activation. By loading MoS₂ on carbon cloths, a flexible photothermal membrane is designed for practical application of sunlight-to-heat conversion to activate PDS with high efficiency, stability, and recycling. The present results demonstrate the potential of applying light-to-heat conversion in Fenton-like processes in pollution control, which opens new avenues towards utilization of inexhaustible solar energy and novel approaches for environmental remediation.

Strategies for improving the lithium-storage performance of 2D nanomaterials

2D nanomaterials, including graphene, transition metal oxide (TMO) nanosheets, transition metal dichalcogenide (TMD) nanosheets, etc., have offered an appealing and unprecedented opportunity for the development of high-performance electrode materials for lithium-ion batteries (LIBs). Although significant progress has been made on 2D nanomaterials for LIB applications in the recent years, some major challenges still exist for the direct use of these sheet-like nanomaterials, such as their serious self-agglomerating tendency during electrode fabrication and low conductivity as well as the large volume changes over repeated charging–discharging cycles for most TMOs/TMDs, which have resulted in large irreversible capacity, low initial Coulombic efficiency and fast capacity fading. To address these issues, considerable progress has been made in the exploitation of 2D nanosheets for enhanced lithium storage. In this review, we intend to summarize the recent progress on the strategies for enhancing the lithium-storage performance of 2D nanomaterials, including hybridization with conductive materials, surface/edge functionalization and structural optimization. These strategies for manipulating the structures and properties of 2D nanomaterials are expected to meet the grand challenges for advanced nanomaterials in clean energy applications and thus provide access to exciting materials for achieving high-performance next-generation energy-storage devices.

Origin of multiple band gap values in single width nanoribbons

Deterministic band gap in quasi-one-dimensional nanoribbons is prerequisite for their integrated functionalities in high performance molecular-electronics based devices. However, multiple band gaps commonly observed in graphene nanoribbons of the same width, fabricated in same slot of experiments, remain unresolved, and raise a critical concern over scalable production of pristine and/or hetero-structure nanoribbons with deterministic properties and functionalities for plethora of applications. Here, we show that a modification in the depth of potential wells in the periodic direction of a supercell on relative shifting of passivating atoms at the edges is the origin of multiple band gap values in nanoribbons of the same width in a crystallographic orientation, although they carry practically the same ground state energy. The results are similar when calculations are extended from planar graphene to buckled silicene nanoribbons. Thus, the findings facilitate tuning of the electronic properties of quasi-one-dimensional materials such as bio-molecular chains, organic and inorganic nanoribbons by performing edge engineering.

First-Principles Investigation of Adsorption and Diffusion of Ions on Pristine, Defective and B-doped Graphene

We performed first-principles calculations to reveal the possibility of applying pristine, defective, and B-doped graphene in feasible negative electrode materials of ion batteries. It is found that the barriers for ions are too high to diffuse through the original graphene, however the reduced barriers are obtained by introducing defects (single vacancy, double vacancy, Stone-Wales defect) in the graphene. Among the three types of defects, the systems with a double vacancy could provide the lowest barriers of 1.49 and 6.08 eV for Li and Na, respectively. Furthermore, for all kinds of B-doped graphene with the vacancy, the systems with a double vacancy could also provide the lowest adsorption energies and diffusion barriers. Therefore, undoped and B-doped graphene with a double vacancy turn out to be the most promising candidates that can replace pristine graphene for anode materials in ion batteries.

Nanoarchitectured graphene-based supercapacitors for next-generation energy-storage applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high-energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy-storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double-layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene-based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene-based asymmetric supercapacitors. The challenges and prospects of graphene-based supercapacitors are also discussed.