Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the "grafting from" and "grafting to" approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Aliphatic Polyurethane Elastomers Quaternized with Silane-Functionalized TiO2 Nanoparticles with UV-Shielding Features

The design of high-performance nanocomposites with improved mechanical, thermal or optical properties compared to starting polymers has generated special interest due to their use in a wide range of targeted applications. In the present work, polymer nanocomposites composed of polyurethane elastomers based on polycaprolactone or polycaprolactone/poly(ethylene glycol) soft segments and titanium dioxide (TiO2) nanoparticles as an inorganic filler were prepared and characterized. Initially, the surface of TiO2 nanoparticles was modified with (3-iodopropyl) trimethoxysilane as a coupling agent, and thereafter, the tertiary amine groups from polyurethane hard segments were quaternized with the silane-modified TiO2 nanoparticles in order to ensure covalent binding of the nanoparticles on the polymeric chains. In the preparation of polymer nanocomposites, two quaternization degrees were taken into account (1/1 and 1/0.5 molar ratios), and the resulting nanocomposite coatings were characterized by various methods (Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, contact angle, thermogravimetric analysis, dynamic mechanical thermal analysis). The mechanical parameters of the samples evaluated by tensile testing confirm the elastomeric character of the polyurethanes and of the corresponding composites, indicating the obtaining of highly flexible materials. The absorbance/transmittance measurements of PU/TiO2 thin films in the wavelength range of 200-700 nm show that these partially block UV-A radiation and all UV-B radiation from sunlight and could possibly be used as UV-protective elastomeric coatings.

Colloidal Probes of PNIPAM-Grafted SiO2 in Studying the Microrheology of Thermally Sensitive Microgel Suspensions

The complex rheology and the phase behavior of thermally sensitive poly(N-isopropylacrylamide) (PNIPAM) microgels have been investigated in both the swollen and collapsed states by using microrheology. To avoid the interactions between the tracer probes and the PNIPAM microgels, such as the adsorption or the depletion effect, the probes of silica (SiO2) particles have been grafted with PNIPAM chains (SiO2-PNIPAM) and characterized with Fourier transform infrared spectroscopy (FTIR). The successful preparation of SiO2-PNIPAM has also been proved by the investigation of the particle size and morphology with dynamic light scattering (DLS) and transmission electron microscope (TEM) below and beyond the phase transition temperature of PNIPAM. The microrheology of the PNIPAM microgel suspension has been investigated by using the prepared SiO2-PNIPAM particles as microrheological probes, and the results show that the diffusive coefficient of the probes in the swollen state is one-fifth of that in the collapsed state, and the viscosity of the PNIPAM microgel suspension in the swollen state is four times higher than that in the collapsed state, indicating SiO2-PNIPAM is a good probe in the microrheological study of PNIPAM microgel suspensions.

Thermoresponsive Brushes Facilitate Effective Reinforcement of Calcium Phosphate Cements

Calcium phosphate ceramics are frequently applied to stimulate regeneration of bone in view of their excellent biological compatibility with bone tissue. Unfortunately, these bioceramics are also highly brittle. To improve their toughness, fibers can be incorporated as the reinforcing component for the calcium phosphate cements. Herein, we functionalize the surface of poly(vinyl alcohol) fibers with thermoresponsive poly(N-isopropylacrylamide) brushes of tunable thickness to improve simultaneously fiber dispersion and fiber-matrix affinity. These brushes shift from hydrophilic to hydrophobic behavior at temperatures above their lower critical solution temperature of 32 °C. This dual thermoresponsive shift favors fiber dispersion throughout the hydrophilic calcium phosphate cements (at 21 °C) and toughens these cements when reaching their hydrophobic state (at 37 °C). The reinforcement efficacy of these surface-modified fibers was almost double at 37 versus 21 °C, which confirms the strong potential of thermoresponsive fibers for reinforcement of calcium phosphate cements.

Boron Nitride Nanosheets/PNIPAM Hydrogels with Improved Thermo-Responsive Performance

Thermo-responsive hydrogel is an important smart material. However, its slow thermal response rate limits the scope of its applications. Boron nitride nanosheet-reinforced thermos-responsive hydrogels, which can be controlled by heating, were fabricated by in situ polymerization of N-isopropylacrylamide in the presence of boron nitride nanosheets. The hydrogels exhibit excellent thermo-responsiveness and much enhanced thermal response rate than that of pure poly(N-isopropylacrylamide) hydrogels. Interestingly, the hydrogels can be driven to move in aqueous solution by heating. Importantly, the composite hydrogel is hydrophilic at a temperature below lower critical solution temperature (LCST), while it is hydrophobic at a temperature above LCST. Therefore, it can be used for quick absorption and release of dyes and oils from water. All these properties demonstrate the potential of hydrogel composites for water purification and treatment.

Self-Cleaning Ceramic Tiles Produced via Stable Coating of TiO₂ Nanoparticles

The high photocatalytic power of TiO₂ nanoparticles has drawn great attention in environmental and medical applications. Coating surfaces with these particles enables us to benefit from self-cleaning properties and decomposition of pollutants. In this paper, two strategies have been introduced to coat ceramic tiles with TiO₂ nanoparticles, and the self-cleaning effect of the surfaces on degradation of an organic dye under ultraviolent (UV) exposure is investigated. In the first approach, a simple one-step heat treatment method is introduced for coating, and different parameters of the heat treatment process are examined. In the second method, TiO₂ nanoparticles are first aminosilanized using (3-Aminopropyl)triethoxysilane (APTES) treatment followed by their covalently attachment onto CO₂ plasma treated ceramic tiles via N-(3-Dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride (EDC) and N-Hydroxysuccinimide (NHS) chemistry. We monitor TiO₂ nanoparticle sizes throughout the coating process using dynamic light scattering (DLS) and characterize developed surfaces using X-ray photoelectron spectroscopy (XPS). Moreover, hydrophilicity of the coated surfaces is quantified using a contact angle measurement. It is shown that applying a one-step heat treatment process with the optimum temperature of 200 °C for 5 h results in successful coating of nanoparticles and rapid degradation of dye in a short time. In the second strategy, the APTES treatment creates a stable covalent coating, while the photocatalytic capability of the particles is preserved. The results show that coated ceramic tiles are capable of fully degrading the added dyes under UV exposure in less than 24 h.

Ultrathin thermoresponsive self-folding 3D graphene

Graphene and other two-dimensional materials have unique physical and chemical properties of broad relevance. It has been suggested that the transformation of these atomically planar materials to three-dimensional (3D) geometries by bending, wrinkling, or folding could significantly alter their properties and lead to novel structures and devices with compact form factors, but strategies to enable this shape change remain limited. We report a benign thermally responsive method to fold and unfold monolayer graphene into predesigned, ordered 3D structures. The methodology involves the surface functionalization of monolayer graphene using ultrathin noncovalently bonded mussel-inspired polydopamine and thermoresponsive poly(N-isopropylacrylamide) brushes. The functionalized graphene is micropatterned and self-folds into ordered 3D structures with reversible deformation under a full control by temperature. The structures are characterized using spectroscopy and microscopy, and self-folding is rationalized using a multiscale molecular dynamics model. Our work demonstrates the potential to design and fabricate ordered 3D graphene structures with predictable shape and dynamics. We highlight applicability by encapsulating live cells and creating nonlinear resistor and creased transistor devices.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Bioinspired coating of TiO2nanoparticles with antimicrobial polymers by Cu(0)-LRP: grafting to vs. grafting from

Titanium dioxide nanoparticles coated with non-leachable biocides were prepared by Cu(0)-LRP of tertiary-amine-containing monomersvia“grafting to” and “grafting from” strategies.

Mussel-inspired thermoresponsive polymers with a tunable LCST by Cu(0)-LRP for the construction of smart TiO2 nanocomposites

Thermoresponsive polymers with different microstructures, a tunable LCST and terminal catechol anchors were synthesized by Cu(0)-LRP for the surface functionalization of TiO₂ nanoparticles.

Synthesis and Magneto-Thermal Actuation of Iron Oxide Core-PNIPAM Shell Nanoparticles

Superparamagnetic nanoparticles have been proposed for many applications in biotechnology and medicine. In this paper, it is demonstrated how the excellent colloidal stability and magnetic properties of monodisperse and individually densely grafted iron oxide nanoparticles can be used to manipulate reversibly the solubility of nanoparticles with a poly(N-isopropylacrylamide)nitrodopamine shell. "Grafting-to" and "grafting-from" methods for synthesis of an irreversibly anchored brush shell to monodisperse, oleic acid coated iron oxide cores are compared. Thereafter, it is shown that local heating by magnetic fields as well as global thermal heating can be used to efficiently and reversibly aggregate, magnetically extract nanoparticles from solution and spontaneously redisperse them. The coupling of magnetic and thermally responsive properties points to novel uses as smart materials, for example, in integrated devices for molecular separation and extraction.

Temperature-responsive zinc oxide nanorods arrays grafted with poly(N-isopropylacrylamide) via SI-ATRP

Nanocomposites based on ZnO nanorods, with photocatalysis and temperature responsibility, could be fabricated by grafting poly(N-isopropylacrylamide) PNIPAM via surface-initiated atom transfer radical polymerization (SI-ATRP).

Temperature-responsive hyperbranched amine-based polymers for solid-liquid separation

Temperature-responsive hyperbranched polymers containing primary amines as pendent groups have been synthesized for solid-liquid separation of kaolinite clay suspension. The effects of temperature, polymer charge density, and polymer architecture on particle flocculation have been investigated. Suspensions treated with the temperature-responsive amine-based hyperbranched polymers showed remarkable separation of the fine particles at a low polymer dosage of 10 ppm and at testing temperatures of 40 °C. In comparison to other polymers studied (linear and hyperbranched homopolymers and copolymers), the temperature-responsive amine-based hyperbranched copolymers showed better particle flocculation at 40 °C, as evidenced by the formation of a thinner sediment bed without compromising the amount of clay particles being flocculated. This superior solid-liquid separation performance can be explained by the hydrophobic interaction of PNIPAM segments on particle surfaces or the capture of additional free particles or small floc due to the exposure of buried positive charges (because of the phase separation of the hydrophilic amines and hydrophobic PNIPAM part) at temperatures above the lower critical solution temperature (LCST).