Red Emission Carbon Nanoparticles Which Can Simultaneously Responding to Hypochlorite and pH

Multi-targets detection has obtained much attention because this sensing mode can realize the detection of multi-targets simultaneously, which is helpful for biomedical analysis. Carbon nanoparticles have attracted extensive attention due to their superior optical and chemical properties, but there are few reports about red emission carbon nanoparticles for simultaneous detection of multi-targets. In this paper, a red emission fluorescent carbon nanoparticles were prepared by 1, 2, 4-triaminobenzene dihydrochloride at room temperature. The as-prepared red emission fluorescent carbon nanoparticles exhibited strong emission peak located at 635 nm with an absolute quantum yield up to 24%. They showed excellent solubility, high photostability and good biocompatibility. Furthermore, it could sensitively and selectively response to hypochlorite and pH, thus simultaneous detection of hypochlorite and pH was achieved by combining the red emission fluorescent carbon nanoparticles with computational chemistry. The formation mechanisms of red emission fluorescent carbon nanoparticles and their response to hypochlorite and pH were investigated, respectively.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

Capillary Electrophoretic Characterization of Water-soluble Carbon Nanodots Formed from Glutamic Acid and Boric Acid under Microwave Irradiation

Water-soluble carbon nanodots (CND) were synthesized under microwave irradiation from glutamic acid or glutamic acid-boric acid mixture. The CNDs were collected in an aqueous solution through size fractionation by centrifugal filtration. The CNDs thus prepared were subjected to characterization by capillary electrophoresis (CE). A peak signal of anionic substance was detected in the electropherogram, and it was found to be a major component of the CNDs. The effective electrophoretic mobility of the major component was almost identical over the pH range between 6.7 and 11.6, suggesting that the functional group of amine or boric acid moiety was not included in the CNDs. The effective electrophoretic mobility decreased at an acidic pH of less than 5, and it was suggested that carboxylate moiety was included in the CNDs. A signal of less-charged CNDs was also detected in the electropherogram, and the CNDs were characterized by a CE format of micellar electrokinetic chromatography. Two or four peaks were detected just after the electroosmotic flow; the less-charged CNDs were thus hydrophilic. The affinity interaction was also examined between the major anionic CNDs and a hydrophobic pairing cation. The peak signal of the major anionic CNDs broadened, and its theoretical number of plates decreased in the presence of tetrabutylammonium ion in the separation buffer. A small portion of the anionic CNDs were a little hydrophobic at different degrees, and their effective electrophoretic mobility decreased by the hydrophobic interaction, resulting in peak broadening of the anionic CNDs.

A fluorometric and colorimetric dual-mode sensor based on nitrogen and iron co-doped graphene quantum dots for detection of ferric ions in biological fluids and cellular imaging

A dual-mode sensing strategy based on N, Fe-GQDs for effective and selective detecting of Fe³⁺ and cellular imaging was developed.

In situ synthesis of fluorescent magnetosomes using an organic membrane as a soft template

A novel approach was presented for the in situ synthesis of fluorescent magnetosomes by biological mineralization and carbonization processes for the first time. The surface structures, magnetism and fluorescence were studied, and the cytotoxicity tests and fluorescent trace in liposomes were probed. The fluorescent magnetosomes exhibit not only unique fluorescence and ferromagnetic properties but also low toxicity and superior imaging capability.

Red Emission B, N, S-co-Doped Carbon Dots for Colorimetric and Fluorescent Dual Mode Detection of Fe3+ Ions in Complex Biological Fluids and Living Cells

Colorimetric and fluorescent dual mode detection methods have gained much attention in recent years; however, it is still desirable to develop new colorimetric and fluorescent dual mode nanosensors with more simple preparation procedures, low cost, and excellent biocompatibility. Herein, a colorimetric and fluorescent nanosensor based on B, N, S-co-doped carbon dots (BNS-CDs) was synthesized by one-step hydrothermal treatment of 2,5-diaminobenzenesulfonic acid and 4-aminophenylboronic acid hydrochloride. Using this nanosensor, a highly sensitive assay of Fe³⁺ in the range of 0.3-546 μM with a detection limit of 90 nM was provided by quenching the red emission fluorescence. It is more attractive that Fe³⁺ can also be visualized by this nanosensor via evident color changes of the solution (from red to blue) under sunlight without the aid of an ultraviolet (UV) lamp. Furthermore, the designed nanosensor can be applied for efficient detection of intracellular Fe³⁺ with excellent biocompatibility and cellular imaging capability, and it holds great promise in biomedical applications.

Fluorescent carbon dots from antineoplastic drug etoposide for bioimaging in vitro and in vivo

Carbon dots for bioimaging in vitro and in vivo were synthesized from the antineoplastic drug etoposide by a one-step method.

Bulbous gold–carbon nanodot hybrid nanoclusters for cancer therapy

Carbon nanodots are used to stabilize gold-nanoclusters. Charge-transfer interactions between carbon nanodots and gold were detected by transient absorption spectroscopy.

Surface Property Modification of Silver Nanoparticles with Dopamine-Functionalized Poly(pentafluorostyrene) via RAFT Polymerization

This research aims to synthesize a dopamine-functionalized macromolecular anchor to perform surface modification on the target nanostructures. A molecular anchor, 3,4-dichloro-1-[2-(3,4-dihydroxyphenyl)ethyl]-1H-pyrrole-2,5-dione, was successfully synthesized from dopamine and 2,3-dichloromaleic anhydride. The anchor acted as a linkage to couple the chains of poly(pentafluorostyrene) (PPFS) which were synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Modification was successfully performed to silver nanoparticles (AgNPs) by deposition of the dopamine-functionalized coupled PPFS onto the surface of the particles. The modified AgNPs had demonstrated improved dispersibility in organic solvent due to the hydrophobic nature of PPFS. To modify the surface chemistry of the nanoparticles further, thioglucose was grafted onto the structure of the coupled PPFS via thiol-fluoro nucleophilic substitution at the para-position of the pentafluorophenyl groups on the monomer units. The presence of sugar moieties on the coupled PPFS increased its hydrophilicity, which allowed the modified AgNPs to be readily dispersed in aqueous solvent.

Core-shell nanoparticles: synthesis and applications in catalysis and electrocatalysis

Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

One-pot synthesis of polyamines improved magnetism and fluorescence Fe3O4–carbon dots hybrid NPs for dual modal imaging

Magnetic–fluorescent Fe₃O₄–CDs with dual modal imaging ability for both MRI and fluorescence imaging are prepared through a one-step hydrothermal method.

Tailored functionalization of iron oxide nanoparticles for MRI, drug delivery, magnetic separation and immobilization of biosubstances

In this critical review, we outline various covalent and non-covalent approaches for the functionalization of iron oxide nanoparticles (IONPs). Tuning the surface chemistry and design of magnetic nanoparticles are described in relation to their applicability in advanced medical technologies and biotechnologies including magnetic resonance imaging (MRI) contrast agents, targeted drug delivery, magnetic separations and immobilizations of proteins, enzymes, antibodies, targeting agents and other biosubstances. We review synthetic strategies for the controlled preparation of IONPs modified with frequently used functional groups including amine, carboxyl and hydroxyl groups as well as the preparation of IONPs functionalized with other species, e.g., epoxy, thiol, alkane, azide, and alkyne groups. Three main coupling strategies for linking IONPs with active agents are presented: (i) chemical modification of amine groups on the surface of IONPs, (ii) chemical modification of bioactive substances (e.g. with fluorescent dyes), and (iii) the activation of carboxyl groups mainly for enzyme immobilization. Applications for drug delivery using click chemistry linking or biodegradable bonds are compared to non-covalent methods based on polymer modified condensed magnetic nanoclusters. Among many challenges, we highlight the specific surface engineering allowing both therapeutic and diagnostic applications (theranostics) of IONPs and magnetic/metallic hybrid nanostructures possessing a huge potential in biocatalysis, green chemistry, magnetic bioseparations and bioimaging.

Iron-oxide-supported nanocarbon in lithium-ion batteries, medical, catalytic, and environmental applications

Owing to the three different orbital hybridizations carbon can adopt, the existence of various carbon nanoallotropes differing also in dimensionality has been already affirmed with other structures predicted and expected to emerge in the future. Despite numerous unique features and applications of 2D graphene, 1D carbon nanotubes, or 0D fullerenes, nanodiamonds, and carbon quantum dots, which have been already heavily explored, any of the existing carbon allotropes do not offer competitive magnetic properties. For challenging applications, carbon nanoallotropes are functionalized with magnetic species, especially of iron oxide nature, due to their interesting magnetic properties (superparamagnetism and strong magnetic response under external magnetic fields), easy availability, biocompatibility, and low cost. In addition, combination of iron oxides (magnetite, maghemite, hematite) and carbon nanostructures brings enhanced electrochemical performance and (photo)catalytic capability due to synergetic and cooperative effects. This work aims at reviewing these advanced applications of iron-oxide-supported nanocarbon composites where iron oxides play a diverse role. Various architectures of carbon/iron oxide nanocomposites, their synthetic procedures, physicochemical properties, and applications are discussed in details. A special attention is devoted to hybrids of carbon nanotubes and rare forms (mesoporous carbon, nanofoam) with magnetic iron oxide carriers for advanced environmental technologies. The review also covers the huge application potential of graphene/iron oxide nanocomposites in the field of energy storage, biomedicine, and remediation of environment. Among various discussed medical applications, magnetic composites of zero-dimensional fullerenes and carbon dots are emphasized as promising candidates for complex theranostics and dual magneto-fluorescence imaging.

Luminescent properties of milk carbon dots and their sulphur and nitrogen doped analogues

Fluorescence image of SMMC-7721 cells excited by ultraviolet light: (a) Milk-CDs; (b) S doped CDs; (c) N doped CDs.

Organic–inorganic nanohybrids and their applications in silver extraction, chromogenic Cu2+ detection in biological systems, and hemolytic assay

An organic–inorganic nanohybrid material is prepared for chemosensor development in aqueous media.