Synthesis of CuO/GO-DE Catalyst and Its Catalytic Properties and Mechanism on Ciprofloxacin Degradation

A new catalyst, copper oxide/graphene oxide-diatomaceous earth (CuO/GO-DE), was prepared by the ultrasonic impregnation method. The optimal conditions for catalyst preparation were explored, and its structure and morphology were characterized by BET, XRD, SEM, TEM, FTIR, Raman and XPS. By taking ciprofloxacin as the target pollutant, the performance and reusability of CuO/GO-DE to degrade antibiotic wastewater was evaluated, and the optimal operating conditions were obtained. The main oxidizing substances in the catalytic system under different pH conditions were analyzed, as well as the synergistic catalytic oxidation mechanism. The intermediate products of ciprofloxacin degradation were identified by LC-MS, and the possible degradation process of ciprofloxacin was proposed.

A uniformly anchored zirconocene complex on magnetic reduced graphene oxide (rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2)) as a novel and reusable nanocatalyst for synthesis of N-arylacetamides and reductive-acetylation of nitroarenes

In this study, a crafted zirconocene complex on rGO@Fe3O4 as a novel magnetic nanocatalyst was synthesized and then characterized using FT-IR, SEM, EDX, VSM, ICP-OES, TGA, BET and MS analyses. Next, catalytic activity of the prepared nanocomposite rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) towards successful reduction of aromatic nitro compounds to arylamines using N2H4·H2O (80%) was investigated. The examined nanocatalyst also showed perfect catalytic activity for reductive-acetylation of aromatic nitro compounds to the corresponding N-arylacetamides without isolation of the prepared in situ amines using the N2H4·H2O/Ac2O system. Furthermore, acetylation of the commercially available arylamines to the corresponding N-arylacetamides was carried out by acetic anhydride in the presence of the rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) nanocomposite. All reactions were carried out in refluxing EtOH as a green solvent to afford the products in high yields. The obtained results exhibited that the nanocomposite of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) showed a great catalytic activity in comparison to rGO and rGO@Fe3O4 as the parent constituents. Recovery and reusability of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) were also examined for 8 consecutive cycles without significant loss of the catalytic activity. This establishes the sustainable anchoring of the zirconocene complex on the surface and mesopores of the rGO@Fe3O4 nanohybrid system.

Magnetic graphene oxide for methylene blue removal: adsorption performance and comparison of regeneration methods

A series of Fe₃O₄-graphene oxide (GO) composite materials (MGOs) with abundant surface area, rich oxygen-containing functional groups, and magnetic properties were prepared in a facile coprecipitation method and then employed for the adsorptive removal of methylene blue (MB) from water. The kinetic data were better fitted in the pseudo-second-order model than in the pseudo-first-order model, and the intraparticle diffusion model revealed the two-step diffusion process including diffusion in the boundary layer and in the porous structures. The maximum adsorption amounts of MB were calculated to be 37.5-108 mg/g at 25 °C and pH 9 using the Langmuir isotherm model. Thermodynamic study showed that the adsorption process was spontaneous, with ΔH° of 23.0-49.6 kJ/mol and ΔS° of 131-249 J∙mol^-1∙K^-1. The adsorption amount of MB increased with pH in the range of 4-10. Inorganic ions including Na⁺ and Ca²⁺ suppressed the adsorption of MB, and the more pronounced impact of Ca²⁺ was ascribed to its higher valence state. The cetyltrimethylammonium bromide (CTAB) surfactant showed a stronger inhibitory effect than Ca²⁺. The adsorption mechanism was proposed to be a combination of electrostatic interactions, hydrophobic adsorption, and electron donor-acceptor interactions. Two methods were used for the regeneration of spent MGO, and the results showed that the peroxomonosulfate (PMS) oxidation method was more favorable than the acid washing method, considering the better regeneration ability and lower amount of washing water used. Finally, the reaction mechanism of PMS oxidation was analyzed based on quenching tests and in situ open circuit potential measurements, which proved that OH and ¹O₂ played dominant roles and that the fine adsorption ability of MGO promoted the reaction between them and MB.

A nanozyme-catalysis-based ratiometric electrochemical sensor for general detection of Cd2+

AuPt–rGO showed good peroxidase-like activity for the oxidation of OPD to DAP (a novel internal reference) and achieved sensitive and reliable detection of Cd2+ based on a ratiometric strategy.

Toward enhanced catalytic activity of magnetic nanoparticles integrated into 3D reduced graphene oxide for heterogeneous Fenton organic dye degradation

Composite Fenton nanocatalyst was prepared by water-based in situ creation of Fe3O4 nanoparticles integrated within the self-assembly 3D reduced graphene oxide (rGO) aerogel. The hybrid applied for the degradation of Acid Green 25 (AG-25) organic dye in an aqueous solution, in the presence of H2O2. By investigating the conditions that maximize the dye adsorption by the 3D composite, it was found that the pH of the solution should be adjusted between the pKa of the functional groups present on the rGO surface (carboxylic acid) and that of the dye (sulfonic acid) to promote electrostatic interactions dye-3D structure. Performed under these conditions, Fenton degradation of AG-25 in presence of H2O2 was completed in less than 30 min, including all the intermediate products, as demonstrated by MALDI-TOF-MS analysis of the aqueous solution after discoloration. Moreover, this was achieved in a solution with as high a dye concentration of 0.5 mg/mL, with only 10 mg of 3D composite catalyst, at room temperature and without additional energy input. The high performance was attributed to the creation of charge-transfer complex between rGO and Fe3O4 nanoparticles throughout covalent bond C-O-Fe, the formation of which was promoted by the in situ synthesis procedure. For the first time, up to the authors' knowledge, AG-25 degradation mechanism was proposed.

A Novel and High-Effective Biosynthesis Pathway of Hesperetin-7-O-Glucoside Based on the Construction of Immobilized Rhamnosidase Reaction Platform

Hesperetin-7-O-glucoside (HMG) is a precursor for synthesizing a sweetener named neohesperidin dihydrochalcone, and the coordination toward flavonoids of metal ions tends to increase the water solubility of flavonoids. In order to achieve effective synthesis of HMG, an immobilized enzyme catalysis platform was constructed using an immobilized rhamnosidase on Fe₃O₄@graphene oxide (Fe₃O₄@GO), a novel reaction pathway based on the platform was designed for preparing a hesperidin complex as a soluble substrate, and ammonium hydroxide as a ligand dissociation agent to obtain HMG. The Fe₃O₄@GO was characterized by Fourier transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and thermal methods (TG/DSC) analysis to evaluate the immobilization matrix properties. The enzyme activity in free and immobilized form at different pH and temperature was optimized. The reusability of immobilized enzyme was also determined. In addition, the kinetic parameters (K_m and V_max) were computed after experiment. Results indicated that rhamnosidase immobilized on Fe₃O₄@GO using a green cross-linker of genipin hydrolyzed successfully and selectively the soluble hesperidin-Cu (II) complex into HMG-Cu (II), a permanent magnet helped the separation of immobilized enzyme and hydrolytes, and ammonium hydroxide was an effective ligand dissociation agent of translating HMG-Cu (II) into HMG with high purity determined by ultraviolet-visible (UV-Vis) spectra analysis and time-of-flight mass spectrometry (TOF-MS). As a result, a novel and high-effective biosynthesis pathway of HMG based on a selectively catalytic reaction platform were constructed successfully. The pathway based on the platform has great potential to produce valuable citrus monoglycoside flavonoid HMG, and the designed reaction route are feasible using the hesperidin-Cu (II) complex with good solubility as a reaction substrate and using ammonium water as a dissociation agent.

Cross-linked small-molecule capsules with excitation wavelength-dependent photoluminescence and high loading capacity: design, synthesis and application in imaging-guided drug delivery

The cross-linked small-molecule micelles (cSMs) have found applications in many fields but their low loading capacity and non-fluorescence property hindered their further development. Herein, water-soluble organic nanoparticles were applied as templates to "stretch" the hydrophobic core of cSMs and photo-cross-linking was employed to supply photoluminescence. The resulting cross-linked small-molecule capsules (cSCs) not only reserve the superior properties of cSMs of accurate monomer, easy functionalization and robust stability, but also achieve high drug loading capacity and excitation wavelength-dependent fluorescence, where the drug loading contents (DLCs) for various hydrophobic drugs were more than 30-fold higher than that of cSMs, and the maximum quantum yield could be as high as 12.0%. Featuring these superiorities, the cSCs hold promising potential in many fields and an example of doxorubicin-loaded cSCs (DOX@cSCs) for multichannel imaging-guided drug delivery is shown in this work.

A Novel Reduced Graphene Oxide-Attapulgite (RGO-ATP) Supported Fe2O3 Catalyst for Heterogeneous Fenton-like Oxidation of Ciprofloxacin: Degradation Mechanism and Pathway

Ciprofloxacin, a third-generation fluoroquinolones (FQs) antibiotic, is observed to increasingly pollute the environment. In this study, a three-dimensional reduced graphene oxide-attapulgite-based catalyst Fe2O3/RGO-ATP was prepared and used to analyze the degradation of ciprofloxacin in a heterogeneous Fenton reaction. The heterogeneous catalyst Fe2O3/RGO-ATP was prepared by a one-step hydrothermal method, and the samples were characterized using BET(Brunauer-Emmett-Teller) surface area, Raman spectroscopy, X-ray diffraction (XRD), Fourier infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The effect of reaction time, temperature, pH, initial concentration, H2O2 dosage and reuse time on the degradation of ciprofloxacin by the catalyst Fe2O3/RGO-ATP was investigated. The optimum conditions of degradation of ciprofloxacin are observed to be 60 °C, pH 5, H2O2 concentration of 2.9724 mmol/L, and initial ciprofloxacin concentration of 50 mg/L. The catalyst could be reused several times with a decline in catalytic capacity. Fourier-transform ion cyclotron resonance mass spectrometer (FT) was also employed to study the degradation products of ciprofloxacin in the aqueous solution. The results show that the heterogeneous catalyst Fe2O3/RGO-ATP possessed an excellent ability for the catalytic degradation of ciprofloxacin. Direct hydroxyl oxidation is noted to be the main pathway of degradation of ciprofloxacin, and no defluorination reaction is observed during the degradation process.

Facile Synthesis of ZnMn2O4@rGO Microspheres for Ultrasensitive Electrochemical Detection of Hydrogen Peroxide from Human Breast Cancer Cells

Mixed transition-metal oxides have witnessed increasing attention in catalysts and electrocatalysts. Herein, reduced graphene oxide-wrapped ZnMn₂O₄ microspheres (ZnMn₂O₄@rGO) were facilely synthesized through the solvothermal technique. The microstructure and morphology of ZnMn₂O₄@rGO microspheres were analyzed under Raman, X-ray photoelectron, X-ray diffraction, and energy-dispersive spectroscopies and scanning electron microscopy. The synthesized ZnMn₂O₄@rGO was employed as an excellent electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). The ZnMn₂O₄@rGO-modified glassy carbon electrode (ZnMn₂O₄@rGO/GCE) exhibited a linear detection to H₂O₂ in a wide concentration range of 0.03-6000 μM with a detection limit of 0.012 μM. The biosensor was evaluated to determine H₂O₂ secreted by human breast cancer cells (MCF-7), indicating its promising applications in physiology and diagnosis.

Recent Development of Printed Micro-Supercapacitors: Printable Materials, Printing Technologies, and Perspectives

The rapid progression of portable and wearable electronics has necessitated the development of high-performing, miniaturized energy-storage devices with flexible form factors and high energy and power delivery. Printed micro-supercapacitors (MSCs), with in-plane interdigital configurations, is touted as a promising choice to fulfill these requirements. New printing technologies can assemble MSCs with fiscal and environmental benefits, large form factors, and at high throughputs, qualities not afforded with conventional microfabrication technologies. Here, recent progress in the preparation of functional ink systems for wearable MSCs, encompassing electrode materials, conductor materials, and electrolytes, is presented. First, a comprehensive background of the fundamentals of printing technology is introduced, with discussions focusing on methods of improving ink functionality while simultaneously retaining good printability. Second, various printing techniques to ensure manufacturable scaling of wearable MSCs with high areal electrochemical performance and small footprint are explored. Within the scope of these two topics, various issues that hinder the full materialization of widespread adoption of printed MSC and next steps to overcome these issues are discussed. Further deep dives in scientific and technical challenges are also presented, including limited functionality of the inks, low printing resolution, overlay accuracy, and complex encapsulation.

Eco-friendly development of an ultrasmall IONP-loaded nanoplatform for bimodal imaging-guided cancer theranostics

Ultrasmall IONP-decorated graphene oxide (GO) nanohybrids present T₁/T₂ dual MRI imaging-guided photothermal-chemo combined anticancer theranostics efficacy.

Highly dispersed core-shell iron nanoparticles decorating onto graphene nanosheets for superior Zn(II) wastewater treatment

This study reports the preparation of highly dispersed nanoscale zerovalent iron (nZVI) with core-shell structure decorated onto graphene nanosheets (Gr-NS) to form nZVI-Gr-NS composite. Meanwhile, its excellent performance for concentrated Zn(II) wastewater treatment is also studied. The adsorption of Zn(II) onto nZVI-Gr-NS is well simulated by the pseudo-second-order model, which indicates the adsorption is the rate-controlling step. Moreover, the adsorption isotherms of Zn(II) on the nZVI-Gr-NS can fit well with the Langmuir model. The negative thermodynamic parameters (△G^Ɵ, △H^Ɵ, △S^Ɵ) calculated from the temperature-dependent isotherms indicate that the sorption reaction of Zn(II) is an exothermic and spontaneous process. The high saturation magnetization (37.4 emu g^-1) of the nZVI-Gr-NS makes separation of nZVI-Gr-NS-bound Zn(II) easily and quickly from aqueous solution. Most importantly, nZVI-Gr-NS composites not only remove Zn(II) but also spontaneously remove As, Se, and Cu ions from real smelting wastewater samples. This study provides a good solution for heavy metal removal in real wastewater.

High-affinity graphene oxide-encapsulated magnetic Zr-MOF for pretreatment and rapid determination of the photosensitizers hematoporphyrin and hematoporphyrin monomethyl ether in human urine prior to UPLC-HRMS

In this paper, a high-affinity graphene oxide-encapsulated magnetic Zr-MOF (GO-Mag@Zr-MOF) was synthesized and characterized by SEM, TEM, and XPS for its morphology, structure, and components. Subsequently, the as-prepared GO-Mag@Zr-MOF was, for the first time, employed as magnetic solid-phase extraction (MSPE) adsorbent for pretreatment and determination of photodynamic therapy (PDT) with the photosensitizers hematoporphyrin (Hp) and hematoporphyrin monomethyl ether (HMME) in human urine samples coupled with ultra-performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS). The synthesized GO-Mag@Zr-MOF revealed excellent adsorption efficiency for Hp and HMME in urine samples. Under optimal conditions, the spiked recoveries of the developed method were in the range of 89.5-105.6% with RSDs less than 10%. The limits of detection (LODs) were found to be 0.036 and 0.042 μg/L for Hp and HMME, respectively, while limits of quantitation (LOQs) were 0.12 and 0.14 μg/L. The proposed method was found to be rapid, effective, sensitive, and accurate for clinical analysis. Moreover, this paper, for the first time, carefully expounded the mass spectrum cracking mechanisms of Hp and HMME. Graphical abstract ᅟ.

Localized cancer treatment by radio-frequency hyperthermia using magnetic nanoparticles immobilized on graphene oxide: from novel synthesis to in vitro studies

We have produced an innovative, theranostic hybrid nanocomposite of graphene oxide and iron oxide (GO-Fe₃O₄) for radio-frequency hyperthermia therapy. A new electrochemical synthesis route for the GO-Fe₃O₄ nanocomposite is employed. Superparamagnetic nanoparticles used for magnetic hyperthermia for biomedical application face longstanding obstacles, including the large number of nanoparticles required to achieve the desired therapeutic temperature, poor colloidal stability in aqueous suspension or physiological media, poor biocompatibility and, most importantly, low specific absorption rate (SAR). To limit the dosage of nanoparticles for therapeutic use, efforts are being made to increase the heating efficiency of nanoparticles. We have introduced an alternative way to increase the SAR value by improving the colloidal stability of magnetic nanoparticles. It is necessary to immobilize these nanoparticles on a support to prevent their agglomeration and precipitation in aqueous suspension. To address these issues, we report a reproducible electrochemical synthesis route for the GO-Fe₃O₄ nanocomposite. Our nanocomposite demonstrated good colloidal stability and low cytotoxicity in vitro. Due to its good colloidal stability, the nanocomposite had a high SAR of 543 W g^-1 and corresponding intrinsic loss power of 5.98 nH m² kg^-1, which is 46% better than the best commercial equivalents. In vitro cytotoxicity studies demonstrated almost 70% cell viability at 200 μg mL^-1 GO-Fe₃O₄ nanocomposite, a comparable concentration for clinical use according to FDA standards. We also showed the therapeutic potential of the nanocomposite using magnetic hyperthermia. We observed cancer cell (A549 human lung epithelial adenocarcinoma) ablation at 41, 42 and 43 °C for 30, 45, and 60 min. A maximum cancer cell death rate of 80.5% was observed at 43 °C for 60 min under alternating magnetic field exposure. Thus, the nanocomposites could be used in the efficient treatment of cancer.

Attachment of enzymes to hydrophilic magnetic nanoparticles through DNA-directed immobilization with enhanced stability and catalytic activity

An efficient enzyme immobilization strategy based on DNA directed immobilization on hydrophilic polydopamine (PDA) modified magnetic nanoparticles was developed in this study.

Cubic CeO2implanted reduced graphene oxide-based highly sensitive biosensor for non-invasive oral cancer biomarker detection

Herein, we report a cerium oxide nanocubes (ncCeO₂)–reduced graphene oxide (RGO)-based nanocomposite for the detection of oral cancer biomarker, cytokeratin fragment-21-1 (Cyfra-21-1), using the electrochemical technique.

Rapid magnetic isolation of extracellular vesicles via lipid-based nanoprobes

Extracellular vesicles (EVs) can mediate intercellular communication by transferring cargo proteins and nucleic acids between cells. The pathophysiological roles and clinical value of EVs are under intense investigation, yet most studies are limited by technical challenges in the isolation of nanoscale EVs (nEVs). Here, we report a lipid nanoprobe that enables spontaneous labelling and magnetic enrichment of nEVs in 15 minutes, with isolation efficiency and cargo composition similar to what can be achieved by the much slower and bulkier method of ultracentrifugation. We also show that the lipid nanoprobes, which allow for downstream analyses of nucleic acids and proteins, enabled the identification of EGFR and KRAS mutations following nEV isolation from blood plasma from non-small-cell lung-cancer patients. The efficiency and versatility of the lipid nanoprobe opens up opportunities in point-of-care cancer diagnostics.

Eco-Friendly Composite of Fe3O4-Reduced Graphene Oxide Particles for Efficient Enzyme Immobilization

A novel type of spherical and porous composites were synthesized to dually benefit from reduced graphene oxide (rGO) and magnetic materials as supports for enzyme immobilization. Three magnetic composite particles of Fe₃O₄ and rGO containing 71% (rGO-Fe₃O₄-M1), 36% (rGO-Fe₃O₄-M2), and 18% (rGO-Fe₃O₄-M3) Fe were prepared using a one-pot spray pyrolysis method and were used for the immobilization of the model enzymes, laccase and horseradish peroxidase (HRP). The rGO-Fe₃O₄ composite particles prepared by spray pyrolysis process had a regular shape, finite size, and uniform composition. The immobilization of laccase and HRP on rGO-Fe₃O₄-M1 resulted in 112 and 89.8% immobilization efficiency higher than that of synthesized pure Fe₃O₄ and rGO particles, respectively. The stability of laccase was improved by approximately 15-fold at 25 °C. Furthermore, rGO-Fe₃O₄-M1-immobilized laccase exhibited 92.6% of residual activity after 10 cycles of reuse and was 192% more efficient in oxidizing different phenolic compounds than the free enzyme. Therefore, these unique composite particles containing rGO and Fe₃O₄ may be promising supports for the efficient immobilization of industrially important enzymes with lower acute toxicity toward Vibrio fischeri than commercial pure Fe₃O₄ particles.

Amino acid-modified graphene oxide magnetic nanocomposite for the magnetic separation of proteins

A novel amino acid-modified graphene oxide magnetic nanocomposite was synthesized and successfully applied to the magnetic separation of proteins.

Graphene-Templated Synthesis of Magnetic Metal Organic Framework Nanocomposites for Selective Enrichment of Biomolecules

Successful control of homogeneous and complete coating of graphene or graphene-based composites with well-defined metal organic framework (MOF) layers is a great challenge. Herein, novel magnetic graphene MOF composites were constructed via a simple strategy for self-assembly of well-distributed, dense, and highly porous MOFs on both sides of graphene nanosheets. Graphene functionalized with magnetic nanoparticles and carboxylic groups on both sides was explored as the backbone and template to direct the controllable self-assembly of MOFs. The prepared composite materials have a relatively high specific surface area (345.4 m(2) g(-1)), and their average pore size is measured to be 3.2 nm. Their relatively high saturation magnetization (23.8 emu g(-1)) indicates their strong magnetism at room temperature. Moreover, the multifunctional composite was demonstrated to be a highly effective affinity material in selective extraction and separation of low-concentration biomolecules from biological samples, in virtue of the size-selection property of the unique porous structure and the excellent affinity of the composite materials. Besides providing a solution for the construction of well-defined functional graphene-based MOFs, this work could also contribute to selective extraction of biomolecules, in virtue of the universal affinity between immobilized metal ions and biomolecules.

Graphene/graphene oxide and their derivatives in the separation/isolation and preconcentration of protein species: A review

The distinctive/unique electrical, chemical and optical properties make graphene/graphene oxide-based materials popular in the field of analytical chemistry. Its large surface offers excellent capacity to anchor target analyte, making it an powerful sorbent in the adsorption and preconcentration of trace level analyte of interest in the field of sample preparation. The large delocalized π-electron system of graphene framework provides strong affinity to species containing aromatic rings, such as proteins, and the abundant active sites on its surface offers the chance to modulate adsorption tendency towards specific protein via functional modification/decoration. This review provides an overview of the current research on graphene/graphene oxide-based materials as attractive and powerful adsorption media in the separation/isolation and preconcentration of protein species from biological sample matrixes. These practices are aiming at providing protein sample of high purity for further investigations and applications, or to achieve certain extent of enrichment prior to quantitative assay. In addition, the challenges and future perspectives in the related research fields have been discussed.

Large scale and facile sonochemical synthesis of magnetic graphene oxide nanocomposites and their dual electro/magneto-stimuli responses

Magnetic Fe₃O₄/GO nanocomposites have been prepared via an effective electrostatic strategy under ultrasonic waves. Their appealing dual electro/magnetorheological (ER/MR) performances were investigated under applied electric or magnetic fields.

A split G-quadruplex DNAzyme based magnetic graphene oxide platform for sensitive authentication of Pseudostellaria heterophylla

Based on the different affinities of graphene oxide (GO) toward ssDNA and dsDNA, a sensitive fluorescence assay utilizing a split G-rich probe and magnetic GO (Fe₃O₄/GO) was developed for authentication of Pseudostellaria heterophylla based on the ITS sequences.

Removal of Pb(II) from aqueous solutions by graphene oxide aerogels

This paper reports the application of graphene oxide aerogels (GOAs) for adsorption of lead(II) ions from aqueous solutions. The aerogels were fabricated from graphene oxide (GO) colloidal suspensions by unidirectional freeze drying method. The synthesized GO powders, as well as the aerogels, were thoroughly characterized by various techniques. The experimental data showed that the kinetic of adsorption followed a pseudo-second-order model with sharp lead(II) ions uptake within the first 90 min. Kinetic data analysis revealed that the adsorption process was controlled by film diffusion mechanism. The equilibrium data were best fitted to Langmuir model and the qmax was calculated to be as high as 158 mg/g. Thermodynamic analysis demonstrated that the adsorption process was spontaneous and endothermic with increased randomness at the solid-liquid interface. Experiments showed that almost all the adsorbed ions could desorb into the solution only by decreasing the solution pH below the isoelectric point of the adsorbent. In addition to abundant oxygen containing functional groups existing on the surface of GO sheets, high porosity and surface area of the aerogel are believed to be influential factors in the adsorption process.

Transmutation of Personal Glucose Meters into Portable and Highly Sensitive Microbial Pathogen Detection Platform

Herein, for the first time, we presented a simple and general approach by using personal glucose meters (PGM) for portable and ultrasensitive detection of microbial pathogens. Upon addition of pathogenic bacteria, glucoamylase-quaternized magnetic nanoparticles (GA-QMNPS) conjugates were disrupted by the competitive multivalent interactions between bacteria and QMNPS, resulting in the release of GA. After magnetic separation, the free GA could catalyze the hydrolysis of amylose into glucose for quantitative readout by PGM. In such way, PGM was transmuted into a bacterial detection device and extremely low detection limits down to 20 cells mL(-1) was achieved. More importantly, QMNPS could inhibit the growth of the bacteria and destroy its cellular structure, which enabled bacteria detection and inhibition simultaneously. The simplicity, portability, sensitivity and low cost of presented work make it attractive for clinical applications.

Application of a highly sensitive magnetic solid phase extraction for phytochemical compounds in medicinal plant and biological fluids by ultra-high performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry

A highly sensitive method using reduced graphene oxide with iron oxide (rGO/Fe3 O4 ) as the sorbent in magnetic SPE has been developed for the purification of five anthraquinones (emodin, rhein, aloeemodin, physcion, and chrysophanol) in rhubarb and rat urine by ultra-HPLC coupled with quadrupole TOF/MS. The extraction was accomplished by adding trace amount rGO/Fe3 O4 suspension to 200 mL of aqueous mixture, and the excellent adsorption capacity of the nanoparticles was fully demonstrated in this procedure. Under the optimized conditions, the calibration curves were linear in the concentration range of 0.05-27.77 ng/mL with correlation coefficients varying from 0.9902 to 0.9978. The LODs ranged from 0.28 to 58.99 pg/mL. The experimental results indicated that the proposed method was feasible for the analysis of anthraquinones in rhubarb and urine samples.

Particle-size dependent melt viscosity behavior and the properties of three-arm star polystyrene-Fe3O4 composites

The melt viscosity of three-arm star polystyrene (S3PS)-Fe(3)O(4) nanoparticle composites was studied by means of rheological measurements. The arm molecular weight (M(a)) of S3PS (or radius gyration) and the particle size of Fe(3)O(4) (radius (R(p)): 3 nm and 44 nm) showed a strong influence on the melt viscosity behavior (at low shear frequencies) of S3PS-Fe(3)O(4) composites. The reinforcement (viscosity increase) was observed in the composites where the M(a) was higher than the M(c) of PS (M(c): the critical molecular weight for chain entanglement). For M(a) < M(c), when the size of Fe(3)O(4) nanoparticles was changed, the melt viscosity of the composites exhibited either plasticization (melt viscosity reduction) or reinforcement. When the content of Fe(3)O(4) was low (1 wt%), the transformation from plasticization to reinforcement behavior could be observed, which strongly depended on the size ratio of the radius of gyration (R(g)) of S3PS to the size of nanoparticles (R(p)). In addition, the magnetic properties and thermal stability of S3PS-Fe(3)O(4) composites were studied.

Mussel-inspired surface modification of magnetic@graphite nanosheets composite for efficient Candida rugosa lipase immobilization

By the facile adhesion way, the novel composite complex by polydopamine (PDA) and magnetic graphite nanosheets (Fe3O4@GNSs) has been successfully synthesized. The resulting composite was characterized by means of scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, and Raman spectra, X-ray diffraction, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. Meanwhile, the PDA functionalized Fe3O4@GNSs (Fe3O4@GNSs-PDA) was applied for Candida rugosa lipase (CRL) immobilization covalently without any toxic coupling agent. Combining the superior physical properties and chemical stability of Fe3O4@GNSs and the well biocompatibility, functional characteristics of PDA, the Fe3O4@GNSs-PDA composite displayed several advantages, including the high enzyme capacity, enzyme activity and stability and a decrease in enzyme loss. Our work demonstrated that the mussel-inspired Fe3O4@GNSs can be extended to many other applications such as biocatalytic, genetic and industrial.

Synthesis of a hydrophilic maltose functionalized Au NP/PDA/Fe3O4-RGO magnetic nanocomposite for the highly specific enrichment of glycopeptides

A novel approach was developed to synthesize a hydrophilic thiol-terminated maltose-functionalized Au NP/PDA/Fe₃O₄-RGO nanocomposite which exhibited high selectivity and detection sensitivity in the enrichment of glycopeptides from complex samples.

One-pot hydrothermal synthesis of hematite-reduced graphene oxide composites for efficient removal of malachite green from aqueous solution

The α-Fe₂O₃–rGO materials prepared by one-pot hydrothermal conditions exhibit an excellent capacity to remove MG from water.

Preparation of graphene–hafnium oxide composite for selective enrichment and analysis of phosphopeptides

A novel graphene–hafnium oxide composite was prepared and applied to selective enrichment phosphopeptides from biosamples.

Facile synthesis of magnetic mesoporous hollow carbon microspheres for rapid capture of low-concentration peptides

Mesoporous and hollow carbon microspheres embedded with magnetic nanoparticles (denoted as MHM) were prepared via a facile self-sacrificial method for rapid capture of low-abundant peptides from complex biological samples. The morphology, structure, surface property, and magnetism were well-characterized. The hollow magnetic carbon microspheres have a saturation magnetization value of 130.2 emu g(-1) at room temperature and a Brunauer-Emmett-Teller specific surface area of 48.8 m(2) g(-1) with an average pore size of 9.2 nm for the mesoporous carbon shell. The effectiveness of these MHM affinity microspheres for capture of low-concentration peptides was evaluated by standard peptides, complex protein digests, and real biological samples. These multifunctional hollow carbon microspheres can realize rapid capture and convenient separation of low-concentration peptides. They were validated to have better performance than magnetic mesoporous silica and commercial peptide-enrichment products. In addition, they can be easily recycled and present excellent reusability. Therefore, it is expected that this work may provide a promising tool for high-throughput discovery of peptide biomarkers from biological samples for disease diagnosis and other biomedical applications.

One-step green synthesis of arginine-capped iron oxide/reduced graphene oxide nanocomposite and its use for acid dye removal

Arginine-capped iron oxide/reduced graphene oxide magnetic nano-adsorbent is synthesized via a one-step green route for acid dyes removal.

Preparation of magnetic graphene composites with hierarchical structure for selective capture of phosphopeptides

A novel graphene composite affinity material consisting of graphene scaffold, Fe3O4 nanoparticles for actuation and fully covered porous titania nanostructures as affinity coating has been designed and constructed. The obtained magnetic graphene composites have a saturation magnetization (Ms) value of 7.3 emu g-1, a BET specific surface area of 111.8 m2 g-1 and an average pore size of 15.1 nm for the porous affinity coating. The multifunctional graphene composites can realize the selective capture and convenient magnetic separation of target phosphopeptides by taking advantage of the decorated magnetic nanoparticles, highly pure and well crystallized affinity coating, and unique porous structure. Sensitivity and selectivity of the affinity graphene composites were evaluated using digests of standard proteins and complex biosamples as well as by comparison with the widely used TiO2 affinity microspheres. The results show that the affinity graphene composites can realize selective capture and rapid separation of low-abundance phosphopeptides from complex biological samples. Thus, this work will contribute to future applications in the purification and separation of specific biomolecules, in particular, low-abundance phosphopeptide biomarkers.

Magnetic affinity microspheres with meso-/macroporous shells for selective enrichment and fast separation of phosphorylated biomolecules

The flowerlike multifunctional affinity microspheres prepared by a facile solvothermal synthesis and subsequent calcination process consist of magnetic cores and hierarchical meso-/macroporous TiO2 shells. The hierarchical porous structure of the flowerlike affinity microspheres is constructed by the macroporous shell from the stacked mesoporous nanopetals which are assembled by small crystallites. The affinity microspheres have a relatively large specific surface area of 50.45 m(2) g(-1) and superparamagnetism with a saturation magnetization (Ms) value of 30.1 emu g(-1). We further demonstrate that they can be applied for rapid and effective purification of phosphoproteins, in virtue of their selective affinity, porous structure, and strong magnetism. In addition, the affinity microspheres can also be used for enrichment of phosphopeptides, and the selectivity is greatly improved due to the increase of mass transport and prevention of the possible "shadow effect" resulting from the smaller and deeper pores by taking advantage of the unique porous structure. Overall, this work will be highly beneficial for future applications in the isolation and identification of phosphorylated biomolecules.