Microfluidic approaches for cancer cell detection, characterization, and separation

Coupled photothermal vortices for capture, sorting, and transportation of particles

Optofluidic techniques have evolved as a prospering strategy for microparticle manipulation via fluid. Unfortunately, there is still a lack of manipulation with simple preparation, easy operation, and multifunctional integration. In this Letter, we present an optofluidic device based on a graphite oxide (GO)-coated dual-fiber structure for multifunctional particle manipulation. By changing the optical power and the relative distance of the fibers, the system can excite thermal fluidic vortices with three inter-coupled states, namely uncoupled, partially coupled and completely coupled states, and therefore can realize capture, sorting, and transportation of the target particles. We conduct a numerical analysis of the whole system, and the results are consistent with the experimental phenomena. This versatile device can be utilized to manipulate target particles in complex microscopic material populations with the advantages of flexible operation, user-friendly control, and low cost.

OMEF biochip for evaluating red blood cell deformability using dielectrophoresis as a diagnostic tool for type 2 diabetes mellitus

Type 2 diabetes mellitus (T2DM) is a prevalent and debilitating disease with numerous health risks, including cardiovascular diseases, kidney dysfunction, and nerve damage. One important aspect of T2DM is its association with the abnormal morphology of red blood cells (RBCs), which leads to increased blood viscosity and impaired blood flow. Therefore, evaluating the mechanical properties of RBCs is crucial for understanding the role of T2DM in cellular deformability. This provides valuable insights into disease progression and potential diagnostic applications. In this study, we developed an open micro-electro-fluidic (OMEF) biochip technology based on dielectrophoresis (DEP) to assess the deformability of RBCs in T2DM. The biochip facilitates high-throughput single-cell RBC stretching experiments, enabling quantitative measurements of the cell size, strain, stretch factor, and post-stretching relaxation time. Our results confirm the significant impact of T2DM on the deformability of RBCs. Compared to their healthy counterparts, diabetic RBCs exhibit ∼27% increased size and ∼29% reduced stretch factor, suggesting potential biomarkers for monitoring T2DM. The observed dynamic behaviors emphasize the contrast between the mechanical characteristics, where healthy RBCs demonstrate notable elasticity and diabetic RBCs exhibit plastic behavior. These differences highlight the significance of mechanical characteristics in understanding the implications for RBCs in T2DM. With its ∼90% sensitivity and rapid readout (ultimately within a few minutes), the OMEF biochip holds potential as an effective point-of-care diagnostic tool for evaluating the deformability of RBCs in individuals with T2DM and tracking disease progression.

Experiment study on focusing pattern prediction of particles in asymmetric contraction-expansion array channel

Contraction-expansion array (CEA) microchannel is a typical structure applied on particle/cell manipulation. The prediction of the particle focusing pattern in CEA microchannel is worthwhile to be investigate deeply. Here, we demonstrated a virtual boundary method by flow field analysis and theoretical derivation. The calculating method of the virtual boundary location, related to the Reynolds number (Re) and the structure parameter RW, was proposed. Combining the approximate Poiseuille flow pattern based on the virtual boundary method with the simulation results of Dean flow, the main line pattern and the main/lateral lines pattern were predicted and validated in experiments. The transformation from the main line pattern to the main/lateral lines pattern can be facilitated by increasing Re, decreasing RW , and decreasing α. An empirical formula was derived to characterize the critical condition of the transformation. The virtual boundary method can provide a guidance for asymmetric CEA channel design and contribute to the widespread application of microfluidic particle focusing.

Precision Isolation of Circulating Leukemia Cells in Chronic Myelogenous Leukemia Patients Using a Novel Microfluidic Device and Its Clinical Applications

Chronic Myelogenous Leukemia (CML) is a prevalent hematologic malignancy characterized by the malignant transformation of myeloid cells and their proliferation in the peripheral blood. The management of CML poses significant challenges, particularly in detecting and eradicating minimal residual disease, which is crucial for preventing relapse and improving survival outcomes. Traditional minimal residual disease detection methods, such as bone marrow aspiration, are invasive and have limitations which include the potential for sampling errors and false negatives. This study introduces a novel label-free microfluidic chip designed for the segregation and recovery of circulating leukemia cells, offering a non-invasive liquid biopsy approach with potential applications in precision medicine. Over July 2021 to October 2023, we recruited 56 CML patients across various disease stages and collected blood samples for analysis using our microfluidic device. The device demonstrated high efficacy in isolating circulating leukemia cells, with an optimal capture efficiency of 78% at a sample flow rate of 3 mL/h. Our results indicate that the microfluidic device can efficiently segregate and quantify circulating leukemia cells, providing a detailed understanding of CML progression and treatment response. The significant reduction in circulating leukemia cell counts in patients in complete remission highlights the device's potential in monitoring treatment efficacy. Furthermore, the device's sensitivity in detecting minimal residual disease could offer a more reliable prognostic tool for therapeutic decision-making in CML management.

Automated Image Analysis for Characterization of Circulating Tumor Cells and Clusters Sorted by Magnetic Levitation

Magnetic levitation-based sorting technologies have revolutionized the detection and isolation of rare cells, including circulating tumor cells (CTCs) and circulating tumor cell clusters (CTCCs). Manual counting and quantification of these cells are prone to time-consuming processes, human error, and inter-observer variability, particularly challenging when heterogeneous cell types in 3D clusters are present. To overcome these challenges, we developed "Fastcount," an in-house MATLAB-based algorithm for precise, automated quantification and phenotypic characterization of CTCs and CTCCs, in both 2D and 3D. Fastcount is 120 times faster than manual counting and produces reliable results with a ±7.3% deviation compared to a trained laboratory technician. By analyzing 400 GB of fluorescence imaging data, we showed that Fastcount outperforms manual counting and commercial software when cells are aggregated in 3D or staining artifacts are present, delivering more accurate results. We further employed Fastcount for automated analysis of 3D image stacks obtained from CTCCs isolated from colorectal adenocarcinoma and renal cell carcinoma blood samples. Interestingly, we observed a highly heterogeneous spatial cellular composition within CTCCs, even among clusters from the same patient. Overall, Fastcount can be employed for various applications with lab-chip devices, such as CTC detection, CTCC analysis in 3D and cell detection in biosensors.

Smart Nanozymes for Cancer Therapy: The Next Frontier in Oncology

Nanomaterials that mimic the catalytic activity of natural enzymes in the complex biological environment of the human body are called nanozymes. Recently, nanozyme systems have been reported with diagnostic, imaging, and/or therapeutic capabilities. Smart nanozymes strategically exploit the tumor microenvironment (TME) by the in situ generation of reactive species or by the modulation of the TME itself to result in effective cancer therapy. This topical review focuses on such smart nanozymes for cancer diagnosis, and therapy modalities with enhanced therapeutic effects. The dominant factors that guide the rational design and synthesis of nanozymes for cancer therapy include an understanding of the dynamic TME, structure-activity relationships, surface chemistry for imparting selectivity, and site-specific therapy, and stimulus-responsive modulation of nanozyme activity. This article presents a comprehensive analysis of the subject including the diverse catalytic mechanisms of different types of nanozyme systems, an overview of the TME, cancer diagnosis, and synergistic cancer therapies. The strategic application of nanozymes in cancer treatment can well be a game changer in future oncology. Moreover, recent developments may pave the way for the deployment of nanozyme therapy into other complex healthcare challenges, such as genetic diseases, immune disorders, and ageing.

Mapping the Potential of Microfluidics in Early Diagnosis and Personalized Treatment of Head and Neck Cancers

Head and neck cancers (HNCs) account for ~4% of all cancers in North America and encompass cancers affecting the oral cavity, pharynx, larynx, sinuses, nasal cavity, and salivary glands. The anatomical complexity of the head and neck region, characterized by highly perfused and innervated structures, presents challenges in the early diagnosis and treatment of these cancers. The utilization of sub-microliter volumes and the unique phenomenon associated with microscale fluid dynamics have facilitated the development of microfluidic platforms for studying complex biological systems. The advent of on-chip microfluidics has significantly impacted the diagnosis and treatment strategies of HNC. Sensor-based microfluidics and point-of-care devices have improved the detection and monitoring of cancer biomarkers using biological specimens like saliva, urine, blood, and serum. Additionally, tumor-on-a-chip platforms have allowed the creation of patient-specific cancer models on a chip, enabling the development of personalized treatments through high-throughput screening of drugs. In this review, we first focus on how microfluidics enable the development of an enhanced, functional drug screening process for targeted treatment in HNCs. We then discuss current advances in microfluidic platforms for biomarker sensing and early detection, followed by on-chip modeling of HNC to evaluate treatment response. Finally, we address the practical challenges that hinder the clinical translation of these microfluidic advances.

Shaking Device for Homogeneous Dispersion of Magnetic Beads in Droplet Microfluidics

Magnetic beads (or particles) having a size between 1 and 5 µm are largely used in many biochemical assays devoted to both purification and quantification of cells, nucleic acids, or proteins. Unfortunately, the use of these beads within microfluidic devices suffers from natural precipitation because of their size and density. The strategies applied thus far to cells or polymeric particles cannot be extended to magnetic beads, mainly due to their magnetization and their higher densities. We report an effective shaking device capable of preventing the sedimentation of beads that are stored in a custom PCR tube. After the characterization of the operating principle, the device is validated for magnetic beads in droplets, leading to an equal distribution between the droplets, barely affecting their generation.

Recent progress of nanostructure-based enrichment of circulating tumor cells and downstream analysis

The isolation and detection of circulating tumor cells (CTCs) play an important role in early cancer diagnosis and prognosis, providing easy access to identify metastatic cells before clinically detectable metastases. In the past 20 years, according to the heterogeneous expression of CTCs on the surface and their special physical properties (size, morphology, electricity, etc.), a series of in vitro enrichment methods of CTCs have been developed based on microfluidic chip technology, nanomaterials and various nanostructures. In recent years, the in vivo detection of CTCs has attracted considerable attention. Photoacoustic flow cytometry and fluorescence flow cytometry were used to detect CTCs in a noninvasive manner. In addition, flexible magnetic wire and indwelling intravascular non-circulating CTCs isolation system were developed for in vivo CTCs study. In the aspect of downstream analysis, gene analysis and drug sensitivity tests of enriched CTCs were developed based on various existing molecular analysis techniques. All of these studies constitute a complete study of CTCs. Although the existing reviews mainly focus on one aspect of capturing CTCs study, a review that includes the in vivo and in vitro capture and downstream analysis study of CTCs is highly needed. This review focuses on not only the classic work and latest research progress in in vitro capture but also includes the in vivo capture and downstream analysis, discussing the advantages and significance of the different research methods and providing new ideas for solving the heterogeneity and rarity of CTCs.

Replicating endothelial shear stress in organ-on-a-chip for predictive hypericin photodynamic efficiency

Photodynamic therapy using Hypericin (Hy-PDT) is an alternative non-invasive treatment that enables selective tumor inhibition and angiogenesis derived from the differential recruitment of endothelial cells in the tumor microenvironment. Most PDT studies were performed on in vitro models without vascular biomechanical simulation. Our work strives to develop a microchip that generates a constant shear stress force to investigate the Hy-PDT efficiency on human umbilical vein endothelial cells (HUVECs). The microchip with a single straight microchannel was composed of the bottom layer (polystyrene), the middle layer (double-sided biocompatible adhesive tape), and the top layer (polyester film) and could produce shear stress in the range of 1.4 - 7.0 dyn cm^-2. The quantification of vascular endothelial growth factor (VEGF), cell viability, and activities of caspases 3 and 7 were assayed to validate the microchip and Hy-PDT efficacy. After the endothelization, static and dynamic cell incubations with Hy were conducted in microchips. Compared to static systems, the shear stress displayed its effect on the increasing release of VEGF and promoted more cell damage and cell death via necrosis during Hy-PDT. In conclusion, the expressive shear stress-dependent manner during PDT treatments suggests that the microchip could be an essential approach in preclinical tests to evaluate the therapeutic outcome considering the endothelial shear stress microenvironment.

A computational model for the transit of a cancer cell through a constricted microchannel

We propose a three-dimensional computational model to simulate the transient deformation of suspended cancer cells flowing through a constricted microchannel. We model the cell as a liquid droplet enclosed by a viscoelastic membrane, and its nucleus as a smaller stiffer capsule. The cell deformation and its interaction with the suspending fluid are solved through a well-tested immersed boundary lattice Boltzmann method. To identify a minimal mechanical model that can quantitatively predict the transient cell deformation in a constricted channel, we conduct extensive parametric studies of the effects of the rheology of the cell membrane, cytoplasm and nucleus and compare the results with a recent experiment conducted on human leukaemia cells. We find that excellent agreement with the experiment can be achieved by employing a viscoelastic cell membrane model with the membrane viscosity depending on its mode of deformation (shear versus elongation). The cell nucleus limits the overall deformation of the whole cell, and its effect increases with the nucleus size. The present computational model may be used to guide the design of microfluidic devices to sort cancer cells, or to inversely infer cell mechanical properties from their flow-induced deformation.

High-throughput isolation of cancer cells in spiral microchannel by changing the direction, magnitude and location of the maximum velocity

Circulating tumor cells (CTCs) are scarce cancer cells that rarely spread from primary or metastatic tumors inside the patient's bloodstream. Determining the genetic characteristics of these paranormal cells provides significant data to guide cancer staging and treatment. Cell focusing using microfluidic chips has been implemented as an effective method for enriching CTCs. The distinct equilibrium positions of particles with different diameters across the microchannel width in the simulation showed that it was possible to isolate and concentrate breast cancer cells (BCCs) from WBCs at a moderate Reynolds number. Therefore we demonstrate high throughput isolation of BCCs using a passive, size-based, label-free microfluidic method based on hydrodynamic forces by an unconventional (combination of long loops and U-turn) spiral microfluidic device for isolating both CTCs and WBCs with high efficiency and purity (more than 90%) at a flow rate about 1.7 mL/min, which has a high throughput compared to similar ones. At this golden flow rate, up to 92% of CTCs were separated from the cell suspension. Its rapid processing time, simplicity, and potential ability to collect CTCs from large volumes of patient blood allow the practical use of this method in many applications.

High-Throughput Separation and Enrichment of Rare Malignant Tumor Cells from Large-Volume Effusions by Inertial Microfluidics

Detection of malignant tumor cells (MTCs) in pleural effusions is essential for determining the malignancy. However, the sensitivity of MTC detection is significantly decreased due to the existence of a massive number of background blood cells in large-volume samples. Herein, we provide a method for on-chip separation and enrichment of MTCs from malignant pleural effusions (MPEs) by integrating an inertial microfluidic sorter with an inertial microfluidic concentrator. The designed sorter and concentrator are capable of focusing cells toward the specified equilibrium positions by inducing intrinsic hydrodynamic forces, enabling the size-based sorting of cells and the removal of cell-free fluids for cell enrichment. A 99.9% removal of background cells and a nearly 1400-fold ultrahigh enrichment of MTCs from large-volume MPEs can be achieved by this method. The concentrated high-purity MTC solution can be used directly for cytological examination by immunofluorescence staining, enhancing the accurate identification of MPEs. The proposed method can also be employed for the detection and count of rare cells in various clinical samples.

Methods to mechanically perturb and characterize GUV-based minimal cell models

Cells shield organelles and the cytosol via an active boundary predominantly made of phospholipids and membrane proteins, yet allowing communication between the intracellular and extracellular environment. Micron-sized liposome compartments commonly known as giant unilamellar vesicles (GUVs) are used to model the cell membrane and encapsulate biological materials and processes in a cell-like confinement. In the field of bottom-up synthetic biology, many have utilized GUVs as substrates to study various biological processes such as protein-lipid interactions, cytoskeletal assembly, and dynamics of protein synthesis. Like cells, it is ideal that GUVs are also mechanically durable and able to stay intact when the inner and outer environment changes. As a result, studies have demonstrated approaches to tune the mechanical properties of GUVs by modulating membrane composition and lumenal material property. In this context, there have been many different methods developed to test the mechanical properties of GUVs. In this review, we will survey various perturbation techniques employed to mechanically characterize GUVs.

Efficient Capture and Separation of Cancer Cells Using Hyaluronic Acid-Modified Magnetic Beads in a Microfluidic Chip

The efficient isolation and specific discrimination of circulating tumor cells (CTCs) is expected to provide valuable information for understanding tumor metastasis and play an important role in the treatment of cancer patients. In this study, we developed a novel and rapid method for efficient capture and specific identification of cancer cells using hyaluronic acid (HA)-modified SiO₂-coated magnetic beads in a microfluidic chip. First, polyacrylamide-surfaced SiO₂-coated magnetic beads (SiO₂@MBs) were covalently conjugated with HA, and the created HA-modified SiO₂@MBs (HA-SiO₂@MBs) display binding specificity to HeLa cells (a human cervical carcinoma cell line) overexpressing CD44 receptors. After incubating the HA-SiO₂@MBs with cancer cells for 1 h, the mixture of MBs and cells was drawn into a designed microfluidic channel with two inlets and outlets. Through the formation of lamellar flow, cells specifically bound with the HA-SiO₂@MBs can be separated under an external magnetic field with a capture efficiency of up to 92.0%. The developed method is simple, fast, and promising for CTC separation and cancer diagnostics applications.

A cascade Fermat spiral microfluidic mixer chip for accurate detection and logic discrimination of cancer cells

Since cancer has emerged as one of the most serious threats to human health, the highly sensitive determination of cancer cells is of significant importance to improve the accuracy of early clinical diagnosis. In our investigation, a novel cascade Fermat spiral microfluidic mixer chip (CFSMMC) combined with fluorescence sensors as a point-of-care (POC) testing system is successfully fabricated to detect and differentiate cancer cells (MCF-7) from normal cells with excellent sensitivity and selectivity. Here, copper ions (Cu²⁺) with peroxidase properties can catalyze the oxidation of the non-fluorescent substrate Amplex Red (AR) to the highly fluorescent resorufin (ox-AR) in the presence of hydrogen peroxide (H₂O₂). Subsequently, thanks to the quenching response of AS1411-AuNPs to ox-AR in the microchannel and the binding of AS1411 to nucleolin on the surface of cancer cells, a CFSMMC-based POC system is established for the highly sensitive detection and identification of human breast cancer cells in a "turn on" manner. The change in fluorescence intensity is linearly related to the concentration of MCF-7, ranging from 10² to 10⁷ cells per mL with a limit of detection (LOD) as low as 17 cells per mL. Interestingly, the cascaded AND logic gate is integrated with CFSMMC for the first time to distinguish cancer cells from normal cells under the control of logic functions, which exhibits great potential in the development of one-step rapid and intelligent detection and logic discrimination.

High-throughput and label-free enrichment of malignant tumor cells and clusters from pleural and peritoneal effusions using inertial microfluidics

Accurate and rapid diagnosis of malignant pleural and peritoneal effusions is critical due to potential association with advanced disease stages or progression. Traditional cytodiagnosis suffers from low efficiency and has difficulties in finding malignant tumor cells (MTCs) from a mass of exfoliated cells. Hence, a polymer microfluidic chip with a slanted spiral channel was employed for high-throughput and label-free enrichment of MTCs and MTC clusters from clinical malignant pleural and peritoneal effusions. The slanted spiral channel with trapezoidal cross-sections was fabricated by assembling two patterned polymer films of different thicknesses within one flow channel layer. After systematically exploring the effects of the particle size, effusion concentration, and flow rate on separation performance of the device, we realized the enrichment of MTCs from abundant blood cells in 2-fold diluted effusions. The results indicated that approximately 85% of the spiked tumor cells (A549 and MCF-7 cell lines) were recovered with high purities of over 37% at a high throughput of 2000 μL min^-1. In clinical applications, we successfully enriched 24-2691 MTCs per mL from the diluted malignant pleural and peritoneal effusions collected from four types of cancer patients (n = 22). More importantly, the MTC clusters were further purified from single MTCs using a higher flow rate of 3000 μL min^-1. Finally, we performed the rapid drug sensitivity test by coupling the microfluidic enrichment with CCK-8 assay. Our approach may serve as valuable assistance to accelerate cancer diagnosis and guide the selection of treatment medications.

Mimicking Tumor Microenvironment by 3D Bioprinting: 3D Cancer Modeling

The tumor microenvironment typically comprises cancer cells, tumor vasculature, stromal components like fibroblasts, and host immune cells that assemble to support tumorigenesis. However, preexisting classic cancer models like 2D cell culture methods, 3D cancer spheroids, and tumor organoids seem to lack essential tumor microenvironment components. 3D bioprinting offers enormous advantages for developing in vitro tumor models by allowing user-controlled deposition of multiple biomaterials, cells, and biomolecules in a predefined architecture. This review highlights the recent developments in 3D cancer modeling using different bioprinting techniques to recreate the TME. 3D bioprinters enable fabrication of high-resolution microstructures to reproduce TME intricacies. Furthermore, 3D bioprinted models can be applied as a preclinical model for versatile research applications in the tumor biology and pharmaceutical industries. These models provide an opportunity to develop high-throughput drug screening platforms and can further be developed to suit individual patient requirements hence giving a boost to the field of personalized anti-cancer therapeutics. We underlined the various ways the existing studies have tried to mimic the TME, mimic the hallmark events of cancer growth and metastasis within the 3D bioprinted models and showcase the 3D drug-tumor interaction and further utilization of such models to develop personalized medicine.

Recent advances for cancer detection and treatment by microfluidic technology, review and update

Numerous cancer-associated deaths are owing to a lack of effective diagnostic and therapeutic approaches. Microfluidic systems for analyzing a low volume of samples offer a precise, quick, and user-friendly technique for cancer diagnosis and treatment. Microfluidic devices can detect many cancer-diagnostic factors from biological fluids and also generate appropriate nanoparticles for drug delivery. Thus, microfluidics may be valuable in the cancer field due to its high sensitivity, high throughput, and low cost. In the present article, we aim to review recent achievements in the application of microfluidic systems for the diagnosis and treatment of various cancers. Although microfluidic platforms are not yet used in the clinic, they are expected to become the main technology for cancer diagnosis and treatment. Microfluidic systems are proving to be more sensitive and accurate for the detection of cancer biomarkers and therapeutic strategies than common assays. Microfluidic lab-on-a-chip platforms have shown remarkable potential in the designing of novel procedures for cancer detection, therapy, and disease follow-up as well as the development of new drug delivery systems for cancer treatment.

Mag-spinner: a next-generation Facile, Affordable, Simple, and porTable (FAST) magnetic separation system

Mag-spinner, a system in which magnets are combined with a spinner system, is a new type of magnetic separation system for the preprocessing of biological and medical samples. Interference by undesired components restricts the detection accuracy and efficiency. Thus, the development of appropriate separation techniques is required for better detection of the desired targets, to enrich the target analytes and remove the undesired components. The strong response of iron oxide nanoclusters can successfully capture the targets quickly and with high efficiency. As a result, cancer cells can be effectively separated from blood using the developed mag-spinner system. Indeed, this system satisfies the requirements for desirable separation systems, namely (i) fast sorting rates, (ii) high separation efficiency, (iii) the ability to process native biological fluids, (iv) simple operating procedures, (v) low cost, (vi) operational convenience, and (vii) portability. Therefore, this system is widely applicable to sample preparation without limitations on place, cost, and equipment.

Comparison of Sample Preparation Methods for Rare Cell Isolation in Microfluidic Devices

The analysis of circulating tumor cells (CTCs) is important for cancer diagnosis and prognosis. Microfluidics has been employed for CTC analysis due to their scaling advantages and high performance. However, pre-analytical methods for CTC sample preparation are often combined with microfluidic platforms because a large sample volume is required to detect extremely rare CTCs. Among pre-analytical methods, Ficoll-Paque™, OncoQuick™, and RosetteSep™ are commonly used to separate blood cells of interest. To compare their performance, we spiked L3.6pl pancreatic cancer cells into healthy blood samples, then employed each technique to prepare blood samples, followed by using a microfluidic platform to capture and detect L3.6pl cells. We found these three methods have similar performance, though the slight edge of RosetteSep™ over Ficoll-Paque™ is statistically significant. We also studied the effects of the tumor cell concentrations on the performance of the frequently used Ficoll-Paque™ method. Furthermore, we examined the repeatability and variability of each pre-analytical technique and the microfluidics-enabled detection. This study will provide researchers and clinicians with comparative data that can influence the choice of sample preparation method, help estimate CTC loss in each pre-analytical method, and correlate the results of clinical studies that employ different techniques.

Fluid Flow Dependency in Immunoselective Cell Capture via Liquid Biopsy

Liquid biopsy targets rare cells that overexpress disease-specific membrane markers and capture these cells via immunoaffinity. The diagnosis efficiency of liquid biopsy can be impaired by the presence of healthy adherent cells also expressing the same biomarkers. Here, we investigated the effect of settling times and rinsing flow rates on the efficiency of EpCAM-based immunocapture using both simulation and experiments with three different cell types. Cell-surface adhesion forces and shear rates were calculated to define the range of rinsing flow rates to test experimentally. Healthy adherent cells did not adhere to blocked immunofunctionalized surfaces within the timeframe of the experiment; however, healthy EpCAM positive cells did bind to the surface to some extent. The greatest difference in capture efficiency was obtained using a high rinsing flow rate of 25 mL/min following 40 min static incubation, indicating that optimizing rinsing flow rates could be a viable option to capture, more specifically, cancer cells overexpressing EpCAM.

Immunocompetent cancer-on-chip models to assess immuno-oncology therapy

The advances in cancer immunotherapy come with several obstacles, limiting its widespread use and benefits so far only to a small subset of patients. One of the underlying challenges remains to be the lack of representative nonclinical models that translate to human immunity and are able to predict clinical efficacy and safety outcomes. In recent years, immunocompetent Cancer-on-Chip models emerge as an alternative human-based platform that enables the integration and manipulation of complex tumor microenvironment. In this review, we discuss novel opportunities offered by Cancer-on-Chip models to advance (mechanistic) immuno-oncology research, ranging from design flexibility to multimodal analysis approaches. We then exemplify their (potential) applications for the research and development of adoptive cell therapy, immune checkpoint therapy, cytokine therapy, oncolytic virus, and cancer vaccines.

Mixing characteristics of a bubble mixing microfluidic chip for genomic DNA extraction based on magnetophoresis: CFD simulation and experiment

Mixing a small amount of magnetic beads and regents with large volume samples evenly in microcavities of a microfluidic chip is always the key step for the application of microfluidic technology in the field of magnetophoresis analysis. This article proposes a microfluidic chip for DNA extraction by magnetophoresis, which relies on bubble rising to generate turbulence and microvortices of various sizes to mix magnetic beads with samples uniformly. The construction and working principle of the microfluidic chip are introduced. CFD simulations are conducted when magnetic beads and samples are irritated by the generation of gas bubbles with the variation of supply pressures. The whole mixing process in the microfluidic chip is observed through a high-speed camera and a microfluidic system when the gas bubbles are generated continuously. The influence of supply pressure on the mixing characteristics of the microfluidic chip is investigated and discussed with both simulation and experiments. Compared with magnetic mixing, bubble mixing can avoid the magnetic beads gather phenomenon caused by magnetic forces and provide a rapid and high efficient solution to realize mixing small amount of regents in large volume samples in a certain order without complex moving structures and operations in a chip. Two applications of mixing with the proposed microfluidic chip are also carried out and discussed.

Methods of Generating Dielectrophoretic Force for Microfluidic Manipulation of Bioparticles

Manipulation of microscale bioparticles including living cells is of great significance to the broad bioengineering and biotechnology fields. Dielectrophoresis (DEP), which is defined as the interactions between dielectric particles and the electric field, is one of the most widely used techniques for the manipulation of bioparticles including cell separation, sorting, and trapping. Bioparticles experience a DEP force if they have a different polarization from the surrounding media in an electric field that is nonuniform in terms of the intensity and/or phase of the electric field. A comprehensive literature survey shows that the DEP-based microfluidic devices for manipulating bioparticles can be categorized according to the methods of creating the nonuniformity via patterned microchannels, electrodes, and media to generate the DEP force. These methods together with the theory of DEP force generation are described in this review, to provide a summary of the methods and materials that have been used to manipulate various bioparticles for various specific biological outcomes. Further developments of DEP-based technologies include identifying materials that better integrate with electrodes than current popular materials (silicone/glass) and improving the performance of DEP manipulation of bioparticles by combining it with other methods of handling bioparticles. Collectively, DEP-based microfluidic manipulation of bioparticles holds great potential for various biomedical applications.

Microtechnology-enabled filtration-based liquid biopsy: challenges and practical considerations

Liquid biopsy, an important enabling technology for early diagnosis and dynamic monitoring of cancer, has drawn extensive attention in the past decade. With the rapid developments of microtechnology, it has been possible to manipulate cells at the single-cell level, which dramatically improves the liquid biopsy capability. As the microtechnology-enabled liquid biopsy matures from proof-of-concept demonstrations towards practical applications, a main challenge it is facing now is to process clinical samples which are usually of a large volume while containing very rare targeted cells in complex backgrounds. Therefore, a high-throughput liquid biopsy which is capable of processing liquid samples with a large volume in a reasonable time along with a high recovery rate of rare targeted cells from complex clinical liquids is in high demand. Moreover, the purity, viability and release feasibility of recovered targeted cells are the other three key impact factors requiring careful considerations. To date, among the developed techniques, micropore-type filtration has been acknowledged as the most promising solution to address the aforementioned challenges in practical applications. However, the presently reported studies about micropore-type filtration are mostly based on trial and error for device designs aiming at different cancer types, which requires lots of efforts. Therefore, there is an urgent need to investigate and elaborate the fundamental theories of micropore-type filtration and key features that influence the working performances in the liquid biopsy of real clinical samples to promote the application efficacy in practical applications. In this review, the state of the art of microtechnology-enabled filtration is systematically and comprehensively summarized. Four key features of the filtration, including throughput, purity, viability and release feasibility of the captured targeted cells, are elaborated to provide the guidelines for filter designs. The recent progress in the filtration mode modulation and sample standardization to improve the filtration performance of real clinical samples is also discussed. Finally, this review concludes with prospective views for future developments of filtration-based liquid biopsy to promote its application efficacy in clinical practice.

Negligible-cost microfluidic device fabrication using 3D-printed interconnecting channel scaffolds

This paper reports a novel, negligible-cost and open-source process for the rapid prototyping of complex microfluidic devices in polydimethylsiloxane (PDMS) using 3D-printed interconnecting microchannel scaffolds. These single-extrusion scaffolds are designed with interconnecting ends and used to quickly configure complex microfluidic systems before being embedded in PDMS to produce an imprint of the microfluidic configuration. The scaffolds are printed using common Material Extrusion (MEX) 3D printers and the limits, cost & reliability of the process are evaluated. The limits of standard MEX 3D-printing with off-the-shelf printer modifications is shown to achieve a minimum channel cross-section of 100×100 μm. The paper also lays out a protocol for the rapid fabrication of low-cost microfluidic channel moulds from the thermoplastic 3D-printed scaffolds, allowing the manufacture of customisable microfluidic systems without specialist equipment. The morphology of the resulting PDMS microchannels fabricated with the method are characterised and, when applied directly to glass, without plasma surface treatment, are shown to efficiently operate within the typical working pressures of commercial microfluidic devices. The technique is further validated through the demonstration of 2 common microfluidic devices; a fluid-mixer demonstrating the effective interconnecting scaffold design, and a microsphere droplet generator. The minimal cost of manufacture means that a 5000-piece physical library of mix-and-match channel scaffolds (100 μm scale) can be printed for ~$0.50 and made available to researchers and educators who lack access to appropriate technology. This simple yet innovative approach dramatically lowers the threshold for research and education into microfluidics and will make possible the rapid prototyping of point-of-care lab-on-a-chip diagnostic technology that is truly affordable the world over.

A microfluidic platform for dissociating clinical scale tissue samples into single cells

The advancement of sample preparation techniques is essential for the field of cell-based therapeutics. To obtain cells suited for clinical applications, the entire process starting from acquiring donor tissue biopsy, all through cell transplantation into the recipient, should occur in an integrated, safe, and efficient system. The current laboratory approach for solid tissue-to-cell isolation is invasive and involves multiple incoherent manual procedures running in an open operator-dependent system. Such an approach provides a chain of events for systematic cell loss that would be unfavorable for rare cell populations such as adult and cancer stem cells. A few lab-on-chip platforms were proposed to process biological tissues, however, they were limited to partial tissue dissociation and required additional processing off-chip. Here, we report the first microfluidic platform that can dissociate native biological tissue into ready-to-use single cells. The platform can merge the successive steps of tissue dissociation, debris filtration, cell sieving, washing, and staining in one streamlined process. Performance of the platform was tested with diverse biological tissues and it could yield viable cells that were ready for on or off-chip cell culture without further processing. Microfluidic tissue dissociation using this platform produced a higher number of viable single cells (an average of 2262 cells/ml per milligram of tissue compared to 1233.25 cells/ml/mg with conventional dissociation).

An interdisciplinary and application-oriented approach to teach microfluidics

Microfluidics is a relatively novel interdisciplinary research area with broad applications in chemistry, physics, material science, and biology. Despite the rapid growth of the field, students' exposure to microfluidic technologies is still limited and often insufficient to appreciate the advantages over other commonly used technologies. To this end, we designed a five-day course, "Microfluidics for microbial ecology," in which students with very different backgrounds learn the basics of microfluidic technologies and sample a range of applications in microbial ecology. The course was created for Master and Ph.D. students interested in applying microfluidics to their research and, therefore, followed an application-oriented approach. The presentation of critical aspects of fluid flow phenomena at the microscale and an outline of the advantages and constraints of the technology provide students with the background to design and perform microfluidics-based experiments. In order to improve the effectiveness of learning in a class with diverse interests and backgrounds, two active learning exercises were implemented. The first comprised the design of an individualized microfluidics experiment in parallel with the lectures: students were guided to apply each module to their personalized application and discuss it in groups. The second was a group experimental activity, in which students jointly set up, performed, analyzed, and presented a microfluidics-based experiment. Given the multidisciplinary teaching context, the course was able to foster common conceptual ground and promote discussion among students. This application-oriented approach built upon experimental activities and in-class discussion is well suited to promote learning in a technology-related subject such as microfluidics.

Microfluidic Isolation and Enrichment of Nanoparticles

Over the past decades, nanoparticles have increased in implementation to a variety of applications ranging from high-efficiency electronics to targeted drug delivery. Recently, microfluidic techniques have become an important tool to isolate and enrich populations of nanoparticles with uniform properties (e.g., size, shape, charge) due to their precision, versatility, and scalability. However, due to the large number of microfluidic techniques available, it can be challenging to identify the most suitable approach for isolating or enriching a nanoparticle of interest. In this review article, we survey microfluidic methods for nanoparticle isolation and enrichment based on their underlying mechanisms, including acoustofluidics, dielectrophoresis, filtration, deterministic lateral displacement, inertial microfluidics, optofluidics, electrophoresis, and affinity-based methods. We discuss the principles, applications, advantages, and limitations of each method. We also provide comparisons with bulk methods, perspectives for future developments and commercialization, and next-generation applications in chemistry, biology, and medicine.

Ultrasonic microstreaming for complex-trajectory transport and rotation of single particles and cells

Precisely controllable transport and rotation of microparticles and cells has great potential to enable new capabilities for single-cell level analysis. In this work, we present versatile ultrasonic microstreaming based manipulation that enables active and precise control of transport and rotation of individual microscale particles and biological cells in a microfluidic device. Two different types of ultrasonic microstreaming flow patterns can be produced by oscillating embedded microstructures in circular and rectilinear vibration modes, which have been validated by both numerical simulation and experimental observation. We have further showcased the ability to transport individual microparticles along the outlines of complex alphabet letters, demonstrating the versatility and simplicity of single-particle level manipulation with bulk vibration.

Recent advances in microfluidic technologies for separation of biological cells

Cell separation has always been a key topic in academic research, especially in the fields of medicine and biology, due to its significance in diagnosis and treatment. Accurate, high-throughput and non-invasive separation of individual cells is key to driving the development of biomedicine and cellular biology. In recent years, a series of researches on the use of microfluidic technologies for cell separation have been conducted to solve bio-related problems. Hence, we present here a comprehensive review on the recent developments of microfluidic technologies for cell separation. In this review, we discuss several cell separation methods, mainly including: physical and biochemical method, their working principles as well as their practical applications. We also analyze the advantages and disadvantages of each method in detail. In addition, the current challenges and future prospects of microfluidic-based cell separation were discussed.

Nanotechnology-Assisted Isolation and Analysis of Circulating Tumor Cells on Microfluidic Devices

Circulating tumor cells (CTCs), a type of cancer cell that spreads from primary tumors into human peripheral blood and are considered as a new biomarker of cancer liquid biopsy. It provides the direction for understanding the biology of cancer metastasis and progression. Isolation and analysis of CTCs offer the possibility for early cancer detection and dynamic prognosis monitoring. The extremely low quantity and high heterogeneity of CTCs are the major challenges for the application of CTCs in liquid biopsy. There have been significant research endeavors to develop efficient and reliable approaches to CTC isolation and analysis in the past few decades. With the advancement of microfabrication and nanomaterials, a variety of approaches have now emerged for CTC isolation and analysis on microfluidic platforms combined with nanotechnology. These new approaches show advantages in terms of cell capture efficiency, purity, detection sensitivity and specificity. This review focuses on recent progress in the field of nanotechnology-assisted microfluidics for CTC isolation and detection. Firstly, CTC isolation approaches using nanomaterial-based microfluidic devices are summarized and discussed. The different strategies for CTC release from the devices are specifically outlined. In addition, existing nanotechnology-assisted methods for CTC downstream analysis are summarized. Some perspectives are discussed on the challenges of current methods for CTC studies and promising research directions.

Past, Present, and Future of Affinity-based Cell Separation Technologies

Progress in cell purification technology is critical to increase the availability of viable cells for therapeutic, diagnostic, and research applications. A variety of techniques are now available for cell separation, ranging from non-affinity methods such as density gradient centrifugation, dielectrophoresis, and filtration, to affinity methods such as chromatography, two-phase partitioning, and magnetic-/fluorescence-assisted cell sorting. For clinical and analytical procedures that require highly purified cells, the choice of cell purification method is crucial, since every method offers a different balance between yield, purity, and bioactivity of the cell product. For most applications, the requisite purity is only achievable through affinity methods, owing to the high target specificity that they grant. In this review, we discuss past and current methods for developing cell-targeting affinity ligands and their application in cell purification, along with the benefits and challenges associated with different purification formats. We further present new technologies, like stimuli-responsive ligands and parallelized microfluidic devices, towards improving the viability and throughput of cell products for tissue engineering and regenerative medicine. Our comparative analysis provides guidance in the multifarious landscape of cell separation techniques and highlights new technologies that are poised to play a key role in the future of cell purification in clinical settings and the biotech industry. STATEMENT OF SIGNIFICANCE: Technologies for cell purification have served science, medicine, and industrial biotechnology and biomanufacturing for decades. This review presents a comprehensive survey of this field by highlighting the scope and relevance of all known methods for cell isolation, old and new alike. The first section covers the main classes of target cells and compares traditional non-affinity and affinity-based purification techniques, focusing on established ligands and chromatographic formats. The second section presents an excursus of affinity-based pseudo-chromatographic and non-chromatographic technologies, especially focusing on magnetic-activated cell sorting (MACS) and fluorescence-activated cell sorting (FACS). Finally, the third section presents an overview of new technologies and emerging trends, highlighting how the progress in chemical, material, and microfluidic sciences has opened new exciting avenues towards high-throughput and high-purity cell isolation processes. This review is designed to guide scientists and engineers in their choice of suitable cell purification techniques for research or bioprocessing needs.

Potential theranostics of circulating tumor cells and tumor-derived exosomes application in colorectal cancer

Background

At the present time, colorectal cancer (CRC) is still known as a disease with a high mortality rate. Theranostics are flawless scenarios that link diagnosis with therapy, including precision medicine as a critical platform that relies on the development of biomarkers particularly “liquid biopsy”. Circulating tumor cells (CTCs) and tumor-derived exosomes (TDEs) in a liquid biopsy approach are of substantial importance in comparison with traditional ones, which cannot generally be performed to determine the dynamics of the tumor due to its wide restriction of range. Thus, recent attempts has shifted towards minimally noninvasive methods.

Main text

CTCs and TDEs, as significant signals emitted from the tumor microenvironment, which are also detectable in the blood, prove themselves to be promising novel biomarkers for cancer diagnosis, prognosis, and treatment response prediction. The therapeutic potential of them is still limited, and studies are at its infancy. One of the major challenges for the implementation of CTCs and TDEs which are new trends in translational medicine is the development of isolation and characterization; a standardizable approach. This review highlights and discusses the current challenges to find the bio fluids application in CRC early detection and clinical management.

Conclusion

Taken together, CTCs and TDEs as silent drivers of metastasis can serve in the management of cancer patient treatment and it is of the upmost importance to expand our insight into this subject. However, due to the limited data available from clinical trials, further validations are required before addressing their putative application in oncology.

Separation of exfoliated tumor cells from viscoelastic pleural effusion using a microfluidic sandwich structure

A microfluidic device with a sandwich structure is proposed to achieve label-free and size-selective separation of tumor cells from pleural effusion. The sandwich structure is a co-flow system incorporating an initial sample layer, an isolation layer and the target sample layer. The isolation layer is used to provide a size-selective interface between the initial sample layer and the isolation layer. The relative magnitude of the inertial lift force and the interfacial lift force at the interface only allows exfoliated tumor cells to migrate out of the sample layer. The high interfacial elastic lift force of the isolation layer also enables the device to be used for pleural effusion samples, whose properties usually vary across a wide range. The target sample layer is used for large migration distances of exfoliated tumor cells in the contraction-expansion array (CEA) channel and high separation efficiency. Cell washing is also achieved with the target sample layer, demonstrating the integration of our device. Experimentally, an optimal flow rate ratio of 1:1:6 was obtained to ensure the stability of the sandwich structure, and the collected fluid was all from the target sample layer. A critical polyethylene oxide (PEO) concentration of the isolation layer (500 ppm, η₀ = 1.37 mPa·s) was then obtained by particle tests. Twenty-micrometer particles were efficiently separated from different viscoelastic samples (PEO concentration changes from 0 to 400 ppm) at this concentration. For the cell test, exfoliated tumor cells from different pleural effusion samples were successfully separated and washed. The separation efficiency of exfoliated tumor cells and blood cells was about 100% and over 90%, respectively. Compared with a conventional co-flow system of two fluids, this device has great advantages in 1) wide applicability for pleural effusion samples of various viscoelasticity and 2) focusing performance. It shows potential for use in medical research and clinical diagnosis of cancer.

Separation of nanoparticles via surfing on chemical wavefronts

The separation of micro and nanoscale colloids is a necessary step in most biological microassay techniques, and is a common practice in microchemical processing. Chemical waves are frequently encountered in biochemical systems driven far from equilibrium. Here, we put forward a strategy for separating small suspending colloids by means of their surfing on substrate chemical wavefronts. The colloids with catalytic activities sensitive to the substrates are activated to show self-propulsion and consequently exhibit a chemotactic response to the traveling wavefronts, which results in their spontaneous separation from the multicomponent complex mixture via self-diffusiophoresis. The dynamics of the process is analyzed through a particle-based simulation. In addition, it is found that separation can be carried out according to particle size. The mechanisms underpinning the chemical and physical separation processes are discussed, and the dependencies on the reaction rate constant and particle size are presented. The results may prove relevant for further experimental and theoretical studies of separation in complex active environments.

Enrichment of Circulating Tumor Cells from Whole Blood Using a Microfluidic Device for Sequential Physical and Magnetophoretic Separations

Based on their high clinical potential, the isolation and enrichment of rare circulating tumor cells (CTCs) from peripheral blood cells has been widely investigated. There have been technical challenges with CTC separation methods using solely cancer-specific surface molecules or just using physical properties of CTCs, as they may suffer from heterogeneity or lack of specificity from overlapping physical characteristics with leukocytes. Here, we integrated an immunomagnetic-based negative enrichment method that utilizes magnetic beads attached to leukocyte-specific surface antigens, with a physical separation method that utilizes the distinct size and deformability of CTCs. By manipulating the pressure distribution throughout the device and balancing the drag and magnetic forces acting on the magnetically labeled white blood cells (WBCs), the sequential physical and magnetophoretic separations were optimized to isolate intact cancer cells, regardless of heterogeneity from whole blood. Using a breast cancer cell line in whole blood, we achieved 100% separation efficiency for cancer cells and an average of 97.2% for WBCs, which resulted in a 93.3% average separation purity. The experimental results demonstrated that our microfluidic device can be a promising candidate for liquid biopsy and can be a vital tool for aiding future cancer research.

The mechanical responses of advecting cells in confined flow

Fluid dynamics have long influenced cells in suspension. Red blood cells and white blood cells are advected through biological microchannels in both the cardiovascular and lymphatic systems and, as a result, are subject to a wide variety of complex fluidic forces as they pass through. In vivo, microfluidic forces influence different biological processes such as the spreading of infection, cancer metastasis, and cell viability, highlighting the importance of fluid dynamics in the blood and lymphatic vessels. This suggests that in vitro devices carrying cell suspensions may influence the viability and functionality of cells. Lab-on-a-chip, flow cytometry, and cell therapies involve cell suspensions flowing through microchannels of approximately 100-800  μ m. This review begins by examining the current fundamental theories and techniques behind the fluidic forces and inertial focusing acting on cells in suspension, before exploring studies that have investigated how these fluidic forces affect the reactions of suspended cells. In light of these studies' findings, both in vivo and in vitro fluidic cell microenvironments shall also be discussed before concluding with recommendations for the field.

Novel Fabrication Process for Integration of Microwave Sensors in Microfluidic Channels

This paper presents a novel fabrication process that allows integration of polydimethylsiloxane (PDMS)-based microfluidic channels and metal electrodes on a wafer with a micrometer-range alignment accuracy. This high level of alignment accuracy enables integration of microwave and microfluidic technologies, and furthermore accurate microwave dielectric characterization of biological liquids and chemical compounds on a nanoliter scale. The microfluidic interface between the pump feed lines and the fluidic channels was obtained using magnets fluidic connection. The tube-channel interference and the fluidic channel-wafer adhesion was evaluated, and up to a pressure of 700 mBar no leakage was observed. The developed manufacturing process was tested on a design of a microwave-microfluidic capacitive sensor. An interdigital capacitor (IDC) and a microfluidic channel were manufactured with an alignment accuracy of 2.5 μm. The manufactured IDC sensor was used to demonstrate microwave dielectric sensing on deionized water and saline solutions with concentrations of 0.1, 0.5, 1, and 2.5 M.

Inner Surface Design of Functional Microchannels for Microscale Flow Control

Fluidic flow behaviors in microfluidics are dominated by the interfaces created between the fluids and the inner surface walls of microchannels. Microchannel inner surface designs, including the surface chemical modification, and the construction of micro-/nanostructures, are good examples of manipulating those interfaces between liquids and surfaces through tuning the chemical and physical properties of the inner walls of the microchannel. Therefore, the microchannel inner surface design plays critical roles in regulating microflows to enhance the capabilities of microfluidic systems for various applications. Most recently, the rapid progresses in micro-/nanofabrication technologies and fundamental materials have also made it possible to integrate increasingly complex chemical and physical surface modification strategies with the preparation of microchannels in microfluidics. Besides, a wave of researches focusing on the ideas of using liquids as dynamic surface materials is identified, and the unique characteristics endowed with liquid-liquid interfaces have revealed that the interesting phenomena can extend the scope of interfacial interactions determining microflow behaviors. This review extensively discusses the microchannel inner surface designs for microflow control, especially evaluates them from the perspectives of the interfaces resulting from the inner surface designs. In addition, prospective opportunities for the development of surface designs of microchannels, and their applications are provided with the potential to attract scientific interest in areas related to the rapid development and applications of various microchannel systems.

Rapid Label-Free Isolation of Circulating Tumor Cells from Patients' Peripheral Blood Using Electrically Charged Fe3O4 Nanoparticles

Isolation of circulating tumor cells (CTCs) in peripheral blood from cancer patients bears critical importance for evaluation of therapeutic efficacy. The current CTC isolation strategies are majorly relying on either protein biomarkers or dimensional features of CTCs. In this study, we present a new methodology for CTC detection and isolation based on the surface charge of cancer cells, a bioelectrical manifestation of the "Warburg effect." Negative surface charge is a direct consequence of glycolysis of cancer cells, which can be utilized as an effective biophysical marker for CTC detection and isolation. Upon cancer cells-nanoparticle interaction via optimum incubation, serum protein-coated electrically charged nanoparticles can trap different cancer cells independent of their epithelial protein expression. In fetal bovine serum , the poly(ethyleneimine)-functionalized Fe₃O₄ nanoparticles, surface-decorated with protein corona, are able to efficiently capture CTCs from blood samples of colorectal cancer patients.  2-8 CTCs has been isolated from 1 mL of blood and identified by immunostaining fluorescence in situ hybridization and immunofluorescence staining in all 25 colorectal cancer patients at varied stages, while only 0-1 CTC was detected from blood samples of 10 healthy donors. Diverse CTC subpopulations of heteroploids and biomarker expression can also be detected in this strategy. The label-free, charge-based CTC method shows promise in cancer diagnosis and prognosis paving a new path for liquid biopsy.

A nanowire-integrated thermoresponsive microfluidic platform for on-demand enrichment and colorimetric detection of pathogenic bacteria

A nanowire-integrated thermoresponsive microfluidic platform is developed for bacterial enrichment and on-demand release. This microfluidic platform can enable selective and highly sensitive S. aureus detection in blood samples down to trace concentrations (40 CFU mL^-1) by the naked eye with the help of a click reaction-assisted colorimetric assay.

Investigation of Leukocyte Viability and Damage in Spiral Microchannel and Contraction-Expansion Array

Inertial separation techniques in a microfluidic system have been widely employed in the field of medical diagnosis for a long time. Despite no requirement of external forces, it requires strong hydrodynamic forces that could potentially cause cell damage or loss during the separation process. This might lead to the wrong interpretation of laboratory results since the change of structures and functional characteristics of cells due to the hydrodynamic forces that occur are not taken into account. Therefore, it is important to investigate the cell viability and damage along with the separation efficacy of the device in the design process. In this study, two inertial separation techniques—spiral microchannel and contraction-expansion array (CEA)—were examined to evaluate cell viability, morphology and intracellular structures using a trypan blue assay (TB), Scanning Electron Microscopy (SEM) and Wright-Giemsa stain. We discovered that cell loss was not significantly found in a feeding system, i.e., syringe, needle and tube, but mostly occurred in the inertial separation devices while the change of cell morphology and intracellular structures were found in the feeding system and inertial separation devices. Furthermore, percentage of cell loss was not significant in both devices (7–10%). However, the change of cell morphology was considerably increased (30%) in spiral microchannel (shear stress dominated) rather than in CEA (12%). In contrast, the disruption of intracellular structures was increased (14%) in CEA (extensional and shear stress dominated equally) rather than spiral microchannel (2%). In these experiments, leukocytes of canine were used as samples because their sizes are varied in a range between 7–12 µm, and they are commonly used as a biomarker in many clinical and medical applications.