Fluoridated HAp:Ln3+ (Ln = Eu or Tb) nanoparticles for cell-imaging

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

High Quantum Efficiency Rare-Earth-Doped Gd2O2S:Tb, F Scintillators for Cold Neutron Imaging

High-resolution neutron radiography provides novel and stirring opportunities to investigate the structures of light elements encased by heavy elements. For this study, a series of Gd₂O₂S:Tb, F particles were prepared using a high-temperature solid phase method and then used as a scintillation screen. Upon reaching 293 nm excitation, a bright green emission originated from the Tb³⁺ luminescence center. The level of F doping affected the fluorescence intensity. When the F doping level was 8 mol%, the fluorescence intensity was at its highest. The absolute quantum yield of the synthesized particles reached as high as 77.21%. Gd₂O₂S:Tb, F particles were applied to the scintillation screen, showing a resolution on the neutron radiograph as high as 12 μm. These results suggest that the highly efficient Gd₂O₂S:Tb, F particles are promising scintillators for the purposes of cold neutron radiography.

Dopamine and DNA functionalized manganese whitlockite nanocrystals for magnetic resonance imaging and chemo-photothermal therapy of tumors

Multifunctional inorganic nanomaterials have opened new avenues for cancer diagnosis and therapy. However, the difficulty to functionalize them has prevented their wider application, owing to the lack of active groups on their surfaces. Here we report a novel method to functionalize manganese whitlockite (Mn-WH) with polydopamine (PDA) and hairpin DNA (hpDNA) to improve the water stability and anti-cancer effects of Mn-WH nanoparticles (Mn-WH NPs). Compared to WH NPs, the Mn-WH@PDA-hpDNA NPs exhibit better water dispersibility, high drug loading capacity, excellent photothermal performance, stable MRI imaging ability, and outstanding chemo-photothermal synergistic therapeutic potential against tumors. After intratumoral injection in nude mice, the Mn-WH@PDA-hpDNA-DOX NPs promote complete tumor ablation upon exposure to 808 laser-irradiation. The nanoparticles showed no major side effects or toxicity. Thus, these results indicate that the Mn-WH@PDA-hpDNA-DOX NPs have excellent potential as anti-cancer agents, along with excellent magnetic resonance imaging (MRI) capabilities and the reported functionalization approach provides a novel and effective strategy for the surface functionalization of inorganic nanomaterials.

Nontoxic Tb3+-induced hyaluronic nano-poached egg aggregates for colorimetric and luminescent detection of Fe3+ ions

This study demonstrates that a luminescent Tb³⁺ complex with green emission can be complexed with hyaluronic (hya) to form nanoparticles. The structure of complexation is composed of a Tb(acac)₂phen core with a hya surface, similar to those of the nano-poached eggs. What makes the structure unique is that Tb(acac)₂phen and hya are connected by chemical bonds. To confirm their utility, we illustrate that the luminescence is rapidly and selectively quenched in the presence of Fe³⁺. Initial cytotoxicity experiments with human liver carcinoma cells show that the luminescent lanthanide complexes are cytotoxic, however, complexing lanthanides to hya renders them cytocompatible. The new complex integrates the advantages of superior lanthanide luminescence, the unique shape of nano-poached eggs, compatibility with aqueous systems, and cytocompatibility. Tb³⁺-induced hyaluronic nano-poached eggs (THNE) can, therefore, be used for Fe³⁺ detection in aqueous systems.

The original Tb³⁺-induced hyaluronic nano-poached eggs (THNE) integrates the advantages of superior lanthanide luminescence, the unique shape of nano-poached eggs, and non-toxicity, for the sensing of Fe³⁺ in aqueous surroundings.

Hydrothermal Synthesis and In Vivo Fluorescent Bioimaging Application of Eu3+/Gd3+ Co-Doped Fluoroapatite Nanocrystals

In this study, Eu3+/Gd3+ co-doped fluoroapatitååe (Eu/Gd:FAP) nanocrystals were synthesized by the hydrothermal method as a fluorescent bioimaging agent. The phase composition, morphology, fluorescence, and biosafety of the resulting samples were characterized. Moreover, the in vivo fluorescent bioimaging application of Eu/Gd:FAP nanocrystals was evaluated in mice with subcutaneously transplanted tumors. The results showed that the Eu/Gd:FAP nanocrystals were short rod-like particles with a size of 59.27 ± 13.34 nm × 18.69 ± 3.32 nm. With an increasing F substitution content, the Eu/Gd:FAP nanocrystals displayed a decreased size and enhanced fluorescence emission. Eu/Gd:FAP nanocrystals did not show hemolysis and cytotoxicity, indicating good biocompatibility. In vivo fluorescent bioimaging study demonstrated that Eu/Gd:FAP nanocrystals could be used as a bioimaging agent and displayed stable fluorescence emitting in tumors, indicating an accumulation in tumor tissue due to the passive targeting ability. In addition, any adverse effects of Eu/Gd:FAP nanocrystals on major organs were not observed. This study shows that biocompatible rare earth co-doped FAP nanocrystals have the potential to be used as a bioimaging agent in vivo.

Surface-Fabrication of Fluorescent Hydroxyapatite for Cancer Cell Imaging and Bio-Printing Applications

Hydroxyapatite (HAP) materials are widely applied as biomedical materials due to their stable performance, low cost, good biocompatibility and biodegradability. Here, a green, fast and efficient strategy was designed to construct a fluorescent nanosystem for cell imaging and drug delivery based on polyethyleneimine (PEI) and functionalized HAP via simple physical adsorption. First, HAP nanorods were functionalized with riboflavin sodium phosphate (HE) to provide them with fluorescence properties based on ligand-exchange process. Next, PEI was attached on the surface of HE-functionalized HAP (HAP-HE@PEI) via electrostatic attraction. The fluorescent HAP-HE@PEI nanosystem could be rapidly taken up by NIH-3T3 fibroblast cells and successfully applied to for cell imaging. Additionally, doxorubicin hydrochloride (DOX) containing HAP-HE@PEI with high loading capacity was prepared, and in-vitro release results show that the maximum release of DOX at pH 5.4 (31.83%) was significantly higher than that at pH 7.2 (9.90%), which can be used as a drug delivery tool for cancer therapy. Finally, HAP-HE@PEI as the 3D inkjet printing ink were printed with GelMA hydrogel, showing a great biocompatible property for 3D cell culture of RAW 264.7 macrophage cells. Altogether, because of the enhanced affinity with the cell membrane of HAP-HE@PEI, this green, fast and efficient strategy may provide a prospective candidate for bio-imaging, drug delivery and bio-printing.

Tumor Diagnosis and Therapy Mediated by Metal Phosphorus-Based Nanomaterials

Metal phosphorus-based nanomaterials (Metal-P NMs) including metal phosphate nanomaterials, metal phosphide nanomaterials, and metal-black phosphorus (Metal-BP) nanocomposite are widely used in the field of biomedicine owing to their excellent physical and chemical properties, biocompatibility, and biodegradability. In recent years, metal phosphate nanomaterials and Metal-BP nanocomposite acted as medicine delivery system have made breakthroughs in tumor diagnosis including magnetic resonance imaging, fluorescence imaging, photoacoustic imaging, nuclear imaging, and therapies including chemotherapy, gene therapy, photothermal therapy, photodynamic therapy, and radiation therapy. Metal phosphate nanomaterials have good biodegradability, especially calcium-based metal phosphate nanomaterials can be dissolved into nontoxic ions and participate in the metabolisms of normal organs. Compared with metal phosphate nanomaterials, metal phosphide nanomaterials have excellent optical, magnetic, and catalytic properties, which can be used as multifunctional diagnostic nanoplatforms and therapeutic agents for chemodynamic therapy, photothermal therapy, or immunotherapy. The latest developments in Metal-P NMs, covering the range of preparation methods and biological applications, such as serving as drug carriers, tumor diagnosis, and therapy, are focused. All in all, the current trends, key issues, future prospects and challenges of Metal-P NMs are concluded and discussed, which are important for the development of this research field and shining more lights on this direction.

Eggshell Derived Europium Doped Hydroxyapatite Nanoparticles for Cell Imaging Application

Hen's eggshell, a biological waste product, was turned into a cell imaging probe: europium doped hydroxyapatite (HAp: Eu) nanoparticle using hydrothermal method. Luminescence of the synthesized nanoparticle was studied for various doping concentrations of the lanthanide ion europium (Eu³⁺). Eu doped HAp showed a hexagonal crystal structure and rod-shaped morphology. Well-defined emission peaks of europium, corresponding to the substitution of Eu³⁺ at the Ca²⁺(I) site of HAp, were confirmed from the samples' photoluminescence (PL) spectra. Good biocompatibility up to 500 μg/mL of the samples indicates their potential applications in bioimaging. Synthesized nanoparticles were internalized and used for in vitro imaging of the PC12 cells without any surface modification. The materials' use as a potential in vivo imaging agent is proposed from the haemolysis study.

Biomaterial Cues Regulated Differentiation of Neural Stem Cells into GABAergic Neurons through Ca2+/c-Jun/TLX3 Signaling Promoted by Hydroxyapatite Nanorods

Directed differentiation enables the production of a specific cell type by manipulating signals in development. However, there is a lack of effective means to accelerate the regeneration of neurons of particular subtypes for pathogenesis and clinical therapy. In this study, we find that hydroxyapatite (HAp) nanorods promote neural differentiation of neural stem cells due to their chemical compositions. Lysosome-mediated degradation of HAp nanorods elevates intracellular calcium concentrations and accelerates GABAergic neurogenesis. As a mechanism, the enhanced activity of a Ca²⁺ peak initiated by HAp nanorods leads to the activation of c-Jun and thus suppresses the expression of GABAergic/glutamatergic selection gene TLX3. We demonstrate the capability of HAp nanorods in promoting the differentiation into GABAergic neurons at both molecular and cellular function levels. Given that GABAergic neurons are responsible for various physiological and pathological processes, our findings open up enormous opportunities in efficient and precise stem cell therapy of neurodegenerative diseases.

Aptamer-mediated synthesis of multifunctional nano-hydroxyapatite for active tumour bioimaging and treatment

OBJECTIVES

The nano-hydroxyapatite (nHAp) is widely used to develop imaging probes and drug carriers due to its excellent bioactivity and biocompatibility. However, traditional methods usually need cumbersome and stringent conditions such as high temperature and post-modification to prepare the functionalized nHAp, which do not benefit the particles to enter cells due to the increased particle size. Herein, a biomimetic synthesis strategy was explored to achieve the AS1411-targeted tumour dual-model bioimaging using DNA aptamer AS1411 as a template. Then, the imaging properties and the biocompatibility of the synthesized AS-nFAp:Gd/Tb were further investigated.

MATERIALS AND METHODS

The AS-nFAp:Gd/Tb was prepared under mild conditions through a one-pot procedure with AS1411 as a template. Besides, the anticancer drug DOX was loaded to AS-nFAp:Gd/Tb so as to achieve the establishment of a multifunctional nano-probe that integrated the tumour diagnosis and treatment. The AS-nFAp:Gd/Tb was characterized by transmission electron microscopy (TEM), energy disperse X-ray Spectroscopy (EDS) mapping, X-ray photoelectron spectroscopy (XPS) spectrum, X-ray diffraction (XRD), fourier-transformed infrared (FTIR) spectroscopy, capillary electrophoresis analyses, zeta potential and particle sizes. The in vitro magnetic resonance imaging (MRI) and fluorescence imaging were performed on an MRI system and a confocal laser scanning microscope, respectively. The potential of the prepared multifunctional nHAp for a targeted tumour therapy was investigated by a CCK-8 kit. And the animal experiments were conducted on the basis of the guidelines approved by the Animal Care and Use Committee of Sichuan University, China.

RESULTS

In the presence of AS1411, the as-prepared AS-nFAp:Gd/Tb presented a needle-like morphology with good monodispersity and improved imaging performance. Furthermore, due to the specific binding between AS1411 and nucleolin up-expressed in cancer cells, the AS-nFAp:Gd/Tb possessed excellent AS1411-targeted fluorescence and MRI imaging properties. Moreover, after loading chemotherapy drug DOX, in vitro and in vivo studies showed that DOX@AS-nFAp:Gd/Tb could effectively deliver DOX to tumour tissues and exert a highly effective tumour inhibition without systemic toxicity compared with pure DOX.

CONCLUSIONS

The results indicated that the prepared multifunctional nHAp synthesized by a novel biomimetic strategy had outstanding capabilities of recognition and treatment for the tumour and had good biocompatibility; hence, it might have a potential clinical application in the future.

Luminescent net-like inorganic scaffolds with europium-doped hydroxyapatite for enhanced bone reconstruction

Bone reconstruction is an urgent problem during clinical treatment. In the past few decades, the construction of composite scaffolds has been a hot spot in the research field of bone tissue engineering (BTE). However, the disadvantages of composite materials raise our awareness to explore the potential application of hydroxyapatite (HAp) in bone substitutes due to the closest properties of HAp to natural bone tissue. In our study, we synthesized Eu³⁺-doped HAp (HAp:Eu³⁺) ultralong nanowires, which can be transformed to hydrophilic net-like scaffolds via a thiol-ene click reaction. The property of luminescence of HAp from Eu³⁺ is beneficial for identifying the relative position of materials and bone marrow mesenchymal stem cells (BMSCs). HAp:Eu³⁺ scaffolds with excellent cell biocompatibility could promote the expression of early bone formation markers (ALP and ARS) and enhance the expression of genes and proteins associated with osteogenesis (Runx 2, OCN, and OPN). In the end, the results of the in vivo osteogenesis experiment showed that pure HAp scaffolds presented different effects of bone tissue reconstruction compared with the composite scaffolds with HAp nanorods and polymer materials. The superior osteogenic effect could be observed in net-like pure HAp scaffold groups. Furthermore, the absorption of HAp:Eu³⁺ scaffolds could be monitored due to the luminescence property of Eu³⁺. This strategy based on ultralong HAp nanowires proved to be a new method for the construction of simple reticular scaffolds for potential osteogenic applications.

Emission-tunable probes using terbium(III)-doped self-activated luminescent hydroxyapatite for in vitro bioimaging

Lanthanide ion (Ln³⁺)-doped nanoscale hydroxyapatites (nHAp) with tunable luminescence have attracted increasing attention due to their potential applications as useful biomedical tools (e.g., imaging and clinical therapy). In this study, we reported that doping Terbium (III) ions (Tb³⁺) in self-activated luminescent nHAp via a facile hydrothermal reaction, using trisodium citrate (Cit^3-), generates unique emission-tunable probes known as Cit/Tb-nHAp. The morphology, crystal phase, and luminescence properties of these Cit/Tb-nHAp probes are studied in detail. Moreover, the results demonstrate that the luminescence of self-activated nHAp originates from the carbon dots trapped within the nHAp crystals, in which partial energy transfer occurs from carbon dots (CDs) to Tb³⁺. The color tunability is successfully achieved by regulating the addition of Cit^3-. Biocompatibility study indicates that when co-cultured with C6 glioma cells in vitro for 3 days, ≤800 ppm Cit/Tb-nHAp is not cytotoxic for C6 glioma cells. We also present in vitro data showing efficient cytoplasmic localization of transferrin conjugated Cit/Tb-nHAp into C6 glioma cells by fluorescence cell imaging. We have successfully engineered Cit/Tb-nHAp, a promising biocompatible agent for future in vitro and in vivo fluorescence bioimaging.

Effect of the Fluorine Substitution for –OH Group on the Luminescence Property of Eu3+ Doped Hydroxyapatite

In this study, different fluoridated hydroxyapatite doped with Eu3+ ion nanoparticles were prepared by the hydrothermal method. The relationship between luminescence enhancement of Eu3+ ions and a fluorine substitution ratio for hydroxyl group in hydroxyapatite was discussed. Moreover, the effect of fluorine substitution for a hydroxyl group on phase composition, crystallinity, and crystal size was studied. Phase composition and chemical structures were identified by X-ray diffraction (XRD) and Fourier Transform Infrared (FT-IR) Spectroscopy analyses. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) patterns were performed to analyze the morphology and particle size. X-ray Photoelectron Spectroscopy (XPS) patterns were observed to analyze fluorine substitution for the hydroxyl group and chemical state of Eu3+ ions in fluoridated hydroxyapatite. The results of these experiments indicated that the samples with a different fluorine substitution ratio were prepared successfully by maintaining the apatite structure. With an increasing fluorine substitution ratio, the morphology maintained a rod-like structure but the aspect ratio tended to decrease. XPS patterns displayed that the fluorine replaced the hydroxyl group and brought environmental variation. The fluorine ions could affect the crystal field environment and promote luminescence conversion. There was a linear relationship between the fluorine substitution ratio and luminescence enhancement.

Preparation and biological imaging of fluorescent hydroxyapatite nanoparticles with poly(2-ethyl-2-oxazoline) through surface-initiated cationic ring-opening polymerization

Fluorescent hydroxyapatite (HAp) nanoparticles have received significant attention in biomedical fields due to their outstanding advantages, such as low immunogenicity, excellent biocompatibility and biodegradability. However, fluorescent HAp nanoparticles with well controlled size and morphology are coated with hydrophobic molecules and their biomedical applications are largely restricted by their poor dispersibility in physiological solutions. Therefore, surface modification of these hydrophobic fluorescent HAp nanoparticles to render them water dispersibility is of utmost importance for biomedical applications. In this work, we reported for the first time for preparation of water-dispersible hydrophilic fluorescent Eu³⁺-doped HAp nanoparticles (named as HAp-PEOTx) through the cationic ring-opening polymerization using hydrophilic and biocompatible 2-ethyl-2-oxazoline (EOTx) as the monomer. The characterization techniques, such as nuclear magnetic resonance (NMR) spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have been used to characterize these samples. Results confirmed that we could successfully obtain the hydrophilic fluorescent HAp-PEOTx composites through the strategy described above. These fluorescent HAp-PEOTx composites display great water dispersibility, unique fluorescent properties and excellent biocompatibility, making them promising for in vitro bioimaging applications.

Hyaluronan-directed fabrication of co-doped hydroxyapatite as a dual-modal probe for tumor-specific bioimaging

Hyaluronan-directed fabrication of Eu/Ba co-doped hydroxyapatite nanocrystals with recognition capability for dual-modal bioimaging.

A method to visually observe the degradation-diffusion-reconstruction behavior of hydroxyapatite in the bone repair process

Nanostructured hydroxyapatite (HAp) has been applied widely as a scaffold material for bone tissue engineering for its good osteoinduction and biodegradability. However, the degradation process and the distribution of degraded HAp within the bone-defect cavity is still not clear. To visually study the behavior of HAp in bone repair process, a membrane of HAp/terbium (Tb)-HAp nanowires (NWs) was prepared with a concentric circle structure (CCS), of which the inner circle and the outer ring were constructed with Tb-HAp and HAp NWs, respectively. HAp/Tb-HAp CCS membrane possessed good osteogenic capacity and efficient fluorescence in the center for visualization. The in vitro experimental results proved that the Tb-HAp and HAp NWs membranes both presented high cytocompatibility and adequate efficiency to induce osteogenic differentiation of bone marrow stem cells (BMSCs). HAp/Tb-HAp CCS membranes were then implanted into a rat calvarial bone-defect model to study the behavior of HAp in bone repair process in vivo by tracking the fluorescence distribution. The results showed that the fluorescence of Tb-HAp diffused gradually from the inner circle to the outer ring, which suggested that the HAp was first degraded, and then the degraded product was diffused and finally reconstructed. Further, the histological results proved that the doping of Tb did not impair the promotive effect of HAp on bone repair process. Therefore, this study provided a visual method to observe the degradation-diffusion-reconstruction behavior of HAp nanomaterials in bone repair process. STATEMENT OF SIGNIFICANCE: The study of dynamic degradation process of implanted hydroxyapatite (HAp) materials in bone-defect cavity is of great significance to bone tissue engineering applications. Here, we designed a HAp/Tb-HAp nanowires (NWs) membrane with concentric circle structure (CCS) to visibly observe the behavior of HAp during bone repair process. HAp/Tb-HAp CCS membrane possessed both osteoinduction ability and fluorescence property. Calvarial bone-defect repair experiments in vivo showed that the fluorescence of Tb-HAp diffused gradually from inner circle to outer ring, which suggested that HAp was first degraded, then diffused and finally reconstructed. Therefore, this invention provides not only a visible method to observe the degradation-diffusion-reconstruction behavior of HAp-based biomaterials, but also a basic understanding of the dynamic change of HAp-based biomaterials.

Composite resin reinforced with fluorescent europium-doped hydroxyapatite nanowires for in-situ characterization

OBJECTIVE

The object is to find an easy but efficient way to illustrate the in-situ dispersion of nano-scaled one-dimensional fillers in composite resins, and to correlate their dispersion status with the properties of composite resins.

METHODS

Fluorescent europium-doped hydroxyapatite nanowires (HANW:Eu) were synthesized via the hydrothermal method. The HANW:Eu was mixed into Bis-GMA/TEGDMA (60/40, w/w) at different contents (1-5wt.%), and different processing methods (kneading, grinding, stirring) were tested to achieve good dispersion of HANW:Eu with the aid of fluorescent imaging system. Then, the mixtures of HANW:Eu and barium glass powder (BaGP) were kneaded into resin at a fixed content (70wt.%) while at different mixing ratios. In addition to the 3D fluorescent imaging, characterizations were carried out on mechanical properties, fractured surface, wear resistance and polymerization shrinkage, to correlate the composite properties of with the dispersion status of the incorporated HANW:Eu.

RESULTS

By doping calcium with 5mol.% of europium, the obtained HANW:Eu displayed strong fluorescence, which made the illustration of its in-situ dispersion status within composites being possible. And this helped to judge that kneading was more efficient to homogeneously disperse HANW:Eu than grinding and stirring. However, it was illustrated vividly that HANW:Eu aggregated severely when it was co-incorporated with BaGP into composites at the total content of 70wt.%, which had not been previously revealed by other microscope observations. In comparison with composites containing 70wt.% of BaGP, improvements in the mechanical properties of resulting composites were identified for the cases containing 3wt.% of HANW and 67wt.% of BaGP, however, their wear volume loss and the polymerization shrinkage did not decrease as expected due to the HANW aggregations.

SIGNIFICANCE

The fluorescent filler prepared in this study provides a feasible strategy to illustrate the in-situ dispersion status of inorganic fillers, which provides guidance for the processing of composite resins.

Effect of Hydroxyapatite Nanorods on the Fate of Human Adipose-Derived Stem Cells Assessed In Situ at the Single Cell Level with a High-Throughput, Real-Time Microfluidic Chip

The fate of stem cells at the single cell level with limited communication with other cells is still unknown due to the lack of an efficient tool for highly accurate molecular detection. Moreover, the conditional sensitivity of biological experiments requires a sufficient number of parallel experiments to support a conclusion. In this work, a microfluidic single cell chip is designed for use with a protein chip to investigate the effect of hydroxyapatite (HAp) on the osteogenic differentiation of human adipose-derived stem cells (hADSCs) in situ at the single cell level. By successfully detecting secretory proteins in situ, it is found that the HAp nanorods enhance osteogenic differentiation at the single cell level. In the chip, the single cell seeding approach confirms the osteogenic differentiation of the hADSCs, which endocytoses HAp, by reducing the influence of the factors secreted by neighboring differentiating cells. Most importantly, more than 7000 microchambers provide a sufficient number of parallel experiments for statistical analysis, which ensure a high level of repeatability of the HAp nanorod-induced osteogenic differentiation. The microfluidic chip comprising single cell culture microchambers with in situ detection capability is a promising tool for research on cell behavior or cell fate at the single cell level.

Synthesis and biological imaging of cross-linked fluorescent polymeric nanoparticles with aggregation-induced emission characteristics based on the combination of RAFT polymerization and the Biginelli reaction

Fluorescent probes have long been regarded as tools for imaging living organisms with advantages such as high sensitivity, good designability and multifunctional potential. Many fluorescent probes, especially the probes based on aggregation-induced emission (AIE) dyes, have received increasing attention since the AIE phenomenon was discovered. These AIE dye-based fluorescent probes could elegantly overcome the notorious quenching effect caused by aggregation of conventional organic dyes. However, it is still difficult to directly apply these AIE-active dyes for biomedical applications owing to their hydrophobic nature. Therefore, the development of novel and facile strategies to endow them with water dispersibility is of critical importance. In this work, we exploit an efficient and simple strategy to fabricate an AIE dye-based fluorescent copolymer through the combination of reversible addition-fragmentation chain transfer and the Biginelli reaction. Moreover, the copolymer can self-assemble to fluorescent polymeric nanoparticles (FPNs) in water solution. Hydrophilic poly(PEGMA-co-AEMA) was reacted with the AIE-active dye 4',4‴-(1,2-diphenylethene-1,2-diyl)bis([1,1'-biphenyl]-4-carbaldehyde (CHO-TPE-CHO) to form amphiphilic luminescent polymers using urea as the connection bridge. The successful synthesis of the final products (poly(PEGMA-co-AEMA-TPE) FPNs) was confirmed by various instruments. Furthermore, Transmission electron microscopy (TEM) images manifest that poly(PEGMA-co-AEMA-TPE) copolymers will self-assemble into spherical nanoparticles in aqueous environments with sizes between 100 nm and 200 nm. The cell uptake and bioimaging experiment confirm that poly(PEGMA-co-AEMA-TPE) FPNs have excellent biocompatibility and emit strong green fluorescence in a cellular environment. Thus, poly(PEGMA-co-AEMA-TPE) FPNs are excellent candidates for biomedical applications.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Luminescent, Fire-Resistant, and Water-Proof Ultralong Hydroxyapatite Nanowire-Based Paper for Multimode Anticounterfeiting Applications

Counterfeiting of valuable certificates, documents, and banknotes is a serious issue worldwide. As a result, the need for developing novel anticounterfeiting materials is greatly increasing. Herein, we report a new kind of ultralong hydroxyapatite nanowire (HAPNW)-based paper with luminescence, fire resistance, and waterproofness properties that may be exploited for anticounterfeiting applications. In this work, lanthanide-ion-doped HAPNWs (HAPNW:Ln³⁺) with lengths over 100 μm have been synthesized and used as a raw material to fabricating a free-standing luminescent, fire-resistant, water-proof paper through a simple vacuum filtration process. It is interesting to find that the luminescence intensity, structure, and morphology of HAPNW:Ln³⁺ highly depend on the experimental conditions. The as-prepared HAPNW:Ln³⁺ paper has a unique combination of properties, such as high flexibility, good processability, writing and printing abilities, luminescence, tunable emission color, waterproofness, and fire resistance. In addition, a well-designed pattern can be embedded in the paper that is invisible under ambient light but viewable as a luminescent color under ultraviolet light. Moreover, the HAPNW:Ln³⁺ paper can be well-preserved without any damage after being burned by fire or soaked in water. The unique combination of luminescence, fire resistance, and waterproofness properties and the nanowire structure of the as-prepared HAPNW:Ln³⁺ paper may be exploited toward developing a new kind of multimode anticounterfeiting technology for various high-level security antiforgery applications, such as in making forgery-proof documents, certificates, labels, and tags and in packaging.

Prolonged fluorescence lifetime of carbon quantum dots by combining with hydroxyapatite nanorods for bio-applications

Carbon quantum dots (CQDs) are a new type of fluorescent nanoparticle for cell imaging and tracking. However, they would easily diffuse and quench, followed by the loss of their fluorescence ability. By connecting their functional groups with other nanoparticles, the CQDs will be protected from destruction and exhibit long-time fluorescence. Here, carbon quantum dot-hydroxyapatite (CQD-HAp) hybrid nanorods were prepared by the self-assembly of CQDs on the surface of HAp nanorods through a facile one-pot process. The morphology and size of the CQD-HAp hybrid nanorods can be well controlled by using oleic acid, which meanwhile is the source of CQDs. The hydrophilic CQD-HAp hybrid nanorods have prolonged fluorescence life due to the connection between CQDs and HAp nanorods, and exhibit a higher fluorescence quantum yield than pure CQDs. In addition, when hybrid nanorods load doxorubicin (Dox) to form Dox-CQD-HAp hybrid nanorods, they can more efficiently kill human cervical cancer (HeLa) cells, rather than human prostatic cancer (PC-3) cells. Long time fluorescence for cell imaging and high efficiency in killing cancer cells as a drug-delivery medium make CQD-HAp hybrid nanorods have great potential applications in the bio-field.

A postsynthetic ion exchange method for tunable doping of hydroxyapatite nanocrystals

Hydroxyapatite nanocrystals were doped with various metal ions with tunable doping level and preserved morphology via a postsynthetic approach.

Investigation of luminescent mechanism: N-rich carbon dots as luminescence centers in fluorescent hydroxyapatite prepared using a typical hydrothermal process

N-Rich carbon dots (CDs) generated in the hydrothermal synthesis of HAp were trapped by growing HAp crystals to form fluorescent HAp materials.

Controlled synthesis and transformation of nano-hydroxyapatite with tailored morphologies for biomedical applications

Controllable nucleation, growth and transformation of nano-scaled hydroxyapatite from spherical to needle-like shapes with excellent dispersibility.

Fabrication of multifunctional fluorescent organic nanoparticles with AIE feature through photo-initiated RAFT polymerization

Novel fluorescent organic nanoparticles with AIE feature have been fabricated through a catalyst-free photo-initiated RAFT polymerization.

Recent developments in polydopamine: an emerging soft matter for surface modification and biomedical applications

After more than four billion years of evolution, nature has created a large number of fascinating living organisms, which show numerous peculiar structures and wonderful properties. Nature can provide sources of plentiful inspiration for scientists to create various materials and devices with special functions and uses. Since Messersmith proposed the fabrication of multifunctional coatings through mussel-inspired chemistry, this field has attracted considerable attention for its promising and exiciting applications. Polydopamine (PDA), an emerging soft matter, has been demonstrated to be a crucial component in mussel-inspired chemistry. In this review, the recent developments of PDA for mussel-inspired surface modification are summarized and discussed. The biomedical applications of PDA-based materials are also highlighted. We believe that this review can provide important and timely information regarding mussel-inspired chemistry and will be of great interest for scientists in the chemistry, materials, biology, medicine and interdisciplinary fields.

In vitro biomechanical properties, fluorescence imaging, surface-enhanced Raman spectroscopy, and photothermal therapy evaluation of luminescent functionalized CaMoO4:Eu@Au hybrid nanorods on human lung adenocarcinoma epithelial cells

Highly dispersible Eu3+-doped CaMoO4@Au-nanorod hybrid nanoparticles (HNPs) exhibit optical properties, such as plasmon resonances in the near-infrared region at 790 nm and luminescence at 615 nm, offering multimodal capabilities: fluorescence imaging, surface-enhanced Raman spectroscopy (SERS) detection and photothermal therapy (PTT). HNPs were conjugated with a Raman reporter (4-mercaptobenzoic acid), showing a desired SERS signal (enhancement factor 5.0 × 105). The HNPs have a heat conversion efficiency of 25.6%, and a hyperthermia temperature of 42°C could be achieved by adjusting either concentration of HNPs, or laser power, or irradiation time. HNPs were modified with antibody specific to cancer biomarker epidermal growth factor receptor, then applied to human lung cancer (A549) and mouse hepatocyte cells (AML12), and in vitro PTT effect was studied. In addition, the biomechanical properties of A549 cells were quantified using atomic force microscopy. This study shows the potential applications of these HNPs in fluorescence imaging, SERS detection, and PTT with good photostability and biocompatibility.

Eu/Tb codoped spindle-shaped fluorinated hydroxyapatite nanoparticles for dual-color cell imaging

Lanthanide doped fluorinated hydroxyapatite (FAp) nanoparticles are promising cell imaging nanomaterials but they are excited at wavelengths which do not match the light sources usually found in a commercial confocal laser scanning microscope (CLSM). In this work, we have successfully prepared spindle-shaped Eu/Tb codoped FAp nanoparticles by a hydrothermal method. Compared with single Eu doped FAp, Eu/Tb codoped FAp can be excited by a 488 nm laser, and exhibit both green and red light emission. By changing the amounts of Eu and Tb peaks, the emission in the green region (500-580 nm) can be decreased to the benefit of the emission in the red region (580-720 nm), thus reaching a balanced dual color emission. Using MC3T3-E1 cells co-cultured with Eu/Tb codoped FAp nanoparticles, it is observed that the nanoparticles are cytocompatible even at a concentration as high as 800 μg ml(-1). The Eu/Tb codoped FAp nanoparticles are located in the cytoplasm and can be monitored by dual color-green and red imaging with a single excitation light at 488 nm. At a concentration of 200 μg ml(-1), the cytoplasm is saturated in 8 hours, and Eu/Tb codoped FAp nanoparticles retain their fluorescence for at least 3 days. The cytocompatible Eu/Tb codoped FAp nanoparticles with unique dual color emission will be of great use for cell and tissue imaging.

Hafnium-doped hydroxyapatite nanoparticles with ionizing radiation for lung cancer treatment

Recently, photodynamic therapy (PDT) is one of the new clinical options by generating cytotoxic reactive oxygen species (ROS) to kill cancer cells. However, the optical approach of PDT is limited by tissue penetration depth of visible light. In this study, we propose that a ROS-enhanced nanoparticle, hafnium-doped hydroxyapatite (Hf:HAp), which is a material to yield large quantities of ROS inside the cells when the nanoparticles are bombarded with high penetrating power of ionizing radiation. Hf:HAp nanoparticles are generated by wet chemical precipitation with total doping concentration of 15mol% Hf(4+) relative to Ca(2+) in HAp host material. The results show that the HAp particles could be successfully doped with Hf ions, resulted in the formation of nano-sized rod-like shape and with pH-dependent solubility. The impact of ionizing radiation on Hf:HAp nanoparticles is assessed by using in-vitro and in-vivo model using A549 cell line. The 2',7'-dichlorofluorescein diacetate (DCFH-DA) results reveal that after being exposed to gamma rays, Hf:HAp could significantly lead to the formation of ROS in cells. Both cell viability (WST-1) and cytotoxicity (LDH) assay show the consistent results that A549 lung cancer cell lines are damaged with changes in the cells' ROS level. The in-vivo studies further demonstrate that the tumor growth is inhibited owing to the cells apoptosis when Hf:HAp nanoparticles are bombarded with ionizing radiation. This finding offer a new therapeutic method of interacting with ionizing radiation and demonstrate the potential of Hf:HAp nanoparticles in tumor treatment, such as being used in a palliative treatment after lung surgical procedure.

STATEMENT OF SIGNIFICANCE

Photodynamic therapy (PDT) is one of the new clinical options by generating cytotoxic reactive oxygen species (ROS) to kill cancer cells. Unfortunately, the approach of PDT is usually limited to the treatment of systemic disease and deeper tumor, due to the limited tissue penetration depth of visible light (620-690nm). Here we report a ROS-enhanced nanoparticle, hafnium-doped hydroxyapatite (Hf:HAp), which can trigger ROS when particles are irradiated with high penetrating power of ionizing radiation. The present study provides quantitative data relating ROS generation and the therapeutic effect of Hf:HAp nanoparticles in lung cancer cells. As such, this material has opened an innovative window for deeper tumor and systemic disease treatment.

Neodymium doped hydroxyapatite theranostic nanoplatforms for colon specific drug delivery applications

Theranostic nanoplatforms integrate therapeutic payloads with diagnostic agents, and help monitor therapeutic response. In this regard, stimuli responsive nanoplatforms further favour combinatorial therapeutic approach that can considerably improve efficacy and specificity of treatment. Herein, we present the engineering of a smart theranostic nanoplatform based on neodymium doped hydroxyapatite (HAN). The presence of neodymium endows the HAN nanoplatforms with near-infrared fluorescence capability. These HAN nanoparticles were then subsequently modified with alginic acid (HANA) to confer pH responsiveness to the synthesized nanoplatforms delivering them to the colon after oral administration. These nanoplatforms possessing optimum size, needle shaped morphology and negative zeta potential, are conducive to cellular internalization. On excitation at 410nm they exhibit near infrared emission at 670nm unraveling their theranostic capabilities. Cytotoxic effects systematically assessed using MTT and live dead assays reveal excellent viability. Raman microscopic imaging technique used to visualize uptake in HeLa cells demonstrate increased uptake from 4 to 16h, with growing cluster size and localization in the cytoplasm. Moreover the concomitant presence of alginic acid manifested advantages of augmented loading and pH dependent release profiles of the model drug, 4 acetyl salicylic acid (4ASA). We could thus establish a theranostic system for early tumour detection, targeted tumour therapy and monitoring of colon cancer that can be administered via the oral route.

Luminescence Enhanced Eu(3+)/Gd(3+) Co-Doped Hydroxyapatite Nanocrystals as Imaging Agents In Vitro and In Vivo

Biocompatible, biodegradable, and luminescent nano material can be used as an alternative bioimaging agent for early cancer diagnosis, which is crucial to achieve successful treatment. Hydroxyapatite (HAP) nanocyrstals have good biocompatibility and biodegradability, and can be used as an excellent host for luminescent rare earth elements. In this study, based on the energy transfer from Gd(3+) to Eu(3+), the luminescence enhanced imaging agent of Eu/Gd codoping HAP (HAP:Eu/Gd) nanocrystals are obtained via coprecipitation with plate-like shape and no change in crystal phase composition. The luminescence can be much elevated (up to about 120%) with a nonlinear increase versus Gd doping content, which is due to the energy transfer ((6)PJ of Gd(3+) → (5)HJ of Eu(3+)) under 273 nm and the possible combination effect of the cooperative upconversion and the successive energy transfer under 394 nm, respectively. Results demonstrate that the biocompatible HAP:Eu/Gd nanocrystals can successfully perform cell labeling and in vivo imaging. The intracellular HAP:Eu/Gd nanocrystals display good biodegradability with a cumulative degradation of about 65% after 72 h. This biocompatible, biodegradable, and luminescence enhanced HAP:Eu/Gd nanocrystal has the potential to act as a fluorescent imaging agent in vitro and in vivo.

Green light-emitting polyepinephrine-based fluorescent organic dots and its application in intracellular metal ions sensing

In this paper, we present a class of bio-dots, polyepinephrine (PEP)-based fluorescent organic dots (PEP-FODs) for selective and sensitive detection of Fe(2+), Fe(3+), and Cu(2+). The PEP-FODs were derived from epinephrine via self-polymerization at relatively low temperature down to 60°C with low cytotoxicity and relative long lifetime (7.24ns). The surface morphology and optical properties of the synthesized PEP-FODs were characterized. We found that the diameters of PEP-FODs were mainly distributed in the narrow range of 2-4nm with an average diameter of 2.9nm. An optimal emission peak located at 490nm was observed when the green light-emitting PEP-FODs were excited at 400nm. It is discovered that Fe(2+), Fe(3+), and Cu(2+)can strongly quench the fluorescence of PEP-FODs through the nonradiative electron-transfer. The detection limit of 0.16, 0.67, and 0.15μM was obtained for Fe(2+), Fe(3+), and Cu(2+), respectively. The independent sensing platform of Fe(2+), Fe(3+), and Cu(2+)could be established by using NaF as a complexing agent and by regulating the reaction time between NaF and metal ions. Cell viability studies reveal that the as-prepared PEP-FODs possess good solubility and biocompatibility, making it as excellent imaging nanoprobes for intracellular Fe(2+), Fe(3+), and Cu(2+)sensing. The developed PEP-FODs might hold great promise to broaden applications in nanotechnology and bioanalysis.

Fluoridated hydroxyapatite: Eu(3+) nanorods-loaded folate-conjugated D-α-tocopheryl polyethylene glycol succinate (vitamin E TPGS) micelles for targeted imaging of cancer cells

In this study, fluoridated hydroxyapatite: Eu(3+) nanorod-loaded folate-conjugated TPGS micelles were prepared by thin-film hydration. The findings in this study demonstrate that micelles show improved dispersion, high stability, and excellent fluorescent property in aqueous solutions, suitable for targeted imaging of cancer cells with over-expressing folate receptors on their surface. The micelles designed in this study will be a promising tool for early detection of cancer.

Fluorescent nanoparticles based on AIE fluorogens for bioimaging

Fluorescent nanoparticles (FNPs) have recently attracted increasing attention in the biomedical field because of their unique optical properties, easy fabrication and outstanding performance in imaging. Compared with conventional molecular probes including small organic dyes and fluorescent proteins, FNPs based on aggregation-induced emission (AIE) fluorogens have shown significant advantages in tunable emission and brightness, good biocompatibility, superb photo- and physical stability, potential biodegradability and facile surface functionalization. In this review, we summarize the latest advances in the development of fluorescent nanoparticles based on AIE fluorogens including polymer nanoparticles and silica nanoparticles over the past few years, and the various biomedical applications based on these fluorescent nanoparticles are also elaborated.

An overview of nanoparticles commonly used in fluorescent bioimaging

This article gives an overview of the various kinds of nanoparticles (NPs) that are widely used for purposes of fluorescent imaging, mainly of cells and tissues. Following an introduction and a discussion of merits of fluorescent NPs compared to molecular fluorophores, labels and probes, the article assesses the kinds and specific features of nanomaterials often used in bioimaging. These include fluorescently doped silicas and sol-gels, hydrophilic polymers (hydrogels), hydrophobic organic polymers, semiconducting polymer dots, quantum dots, carbon dots, other carbonaceous nanomaterials, upconversion NPs, noble metal NPs (mainly gold and silver), various other nanomaterials, and dendrimers. Another section covers coatings and methods for surface modification of NPs. Specific examples on the use of nanoparticles in (a) plain fluorescence imaging of cells, (b) targeted imaging, (c) imaging of chemical species, and (d) imaging of temperature are given next. A final section covers aspects of multimodal imaging (such as fluorescence/nmr), imaging combined with drug and gene delivery, or imaging combined with therapy or diagnosis. The electronic supplementary information (ESI) gives specific examples for materials and methods used in imaging, sensing, multimodal imaging and theranostics such as imaging combined with drug delivery or photodynamic therapy. The article contains 273 references in the main part, and 157 references in the ESI.