Hybrid Molecules Consisting of Lysine Dendrons with Several Hydrophobic Tails: A SCF Study of Self-Assembling

In this article, we used the numerical self-consistent field method of Scheutjens-Fleer to study the micellization of hybrid molecules consisting of one polylysine dendron with charged end groups and several linear hydrophobic tails attached to its root. The main attention was paid to spherical micelles and the determination of the range of parameters at which they can appear. A relationship has been established between the size and internal structure of the resulting spherical micelles and the length and number of hydrophobic tails, as well as the number of dendron generations. It is shown that the splitting of the same number of hydrophobic monomers from one long tail into several short tails leads to a decrease in the aggregation number and, accordingly, the number of terminal charges in micelles. At the same time, it was shown that the surface area per dendron does not depend on the number of hydrophobic monomers or tails in the hybrid molecule. The relationship between the structure of hybrid molecules and the electrostatic properties of the resulting micelles has also been studied. It is found that the charge distribution in the corona depends on the number of dendron generations G in the hybrid molecule. For a small number of generations (up to G=3), a standard double electric layer is observed. For a larger number of generations (G=4), the charges of dendrons in the corona are divided into two populations: in the first population, the charges are in the spherical layer near the boundary between the micelle core and shell, and in the second population, the charges are near the periphery of the spherical shell. As a result, a part of the counterions is localized in the wide region between them. These results are of potential interest for the use of spherical dendromicelles as nanocontainers for drug delivery.

Fluorescent azobenzene-confined coiled-coil mesofibers

Fluorescent protein biomaterials have important applications such as bioimaging in pharmacological studies. Self-assembly of proteins, especially into fibrils, is known to produce fluorescence in the blue band. Capable of self-assembly into nanofibers, we have shown we can modulate its aggregation into mesofibers by encapsulation of a small hydrophobic molecule. Conversely, azobenzenes are hydrophobic small molecules that are virtually non-fluorescent in solution due to their highly efficient photoisomerization. However, they demonstrate fluorogenic properties upon confinement in nanoscale assemblies by reducing the non-radiative photoisomerization. Here, we report the fluorescence of a hybrid protein-small molecule system in which azobenzene is confined in our protein assembly leading to fiber thickening and increased fluorescence. We show our engineered protein Q encapsulates AzoCholine, bearing a photoswitchable azobenzene moiety, in the hydrophobic pore to produce fluorescent mesofibers. This study further investigates the photocontrol of protein conformation as well as fluorescence of an azobenze-containing biomaterial.

Evaluation of PEG-b-polycarbonates self-assemblies containing azobenzene or coumarin moieties as nanocarriers using paclitaxel as a model hydrophobic drug

AIM

The work assesses the performance of nanocarriers from amphiphilic block copolymers with functional azobenzene or coumarin moieties for delivery of paclitaxel.

METHODS

Placlitaxel was encapsulated by the nanoprecipitation method. Characterizations were performed by DLS, TEM, Zeta potential and HPLC. Cell viability was investigated in HeLa and Huh-5-2-cell lines.

RESULTS

Coumarin-containing polymeric micelles (D_h = 26 ± 2 nm, PDI =0.28, ζ = ‒22.9 ± 3.6 mV) with 11.2 ± 0.5%w/w drug loading showed enhanced cytotoxicity in HeLa cells (IC50 < 0.02 nM) compared to free paclitaxel (IC50 = 0.17 ± 0.02 nM). Azobenzene-containing polymeric vesicles (D_h = 390 ± 20 nm, PDI =0.24, ζ = ‒33.2 ± 5.0 mV) with a 6.8 ± 0.4%w/w drug loading showed increased cytotoxicity under 530 nm light (IC50 = 0.0114 ± 0.00033 nM) in HeLa cells due to a stimulated delivery of paclitaxel.

CONCLUSION

Effectivity of these block copolymers as paclitaxel nanovectors and light stimulated release has been demonstrated.

Microfluidic Synthesis of Block Copolymer Micelles: Application as Drug nanocarriers and as Photothermal Transductors When Loading Pd Nanosheets

The synthesis of polymeric nanoparticles from a block copolymer based on poly(ethylene glycol) and a polymethacrylate containing the nucleobase analogue 2,6-diacylaminopyridine has been optimized by microfluidics to obtain homogeneous spherical micelles. Loading and delivery properties have been studied using naproxen as a model. The incorporation of a Pd precursor in the polymer organic solution fed into the micromixer allows the preparation of Pd(II) precursor-polymer hybrid systems, and the subsequent reduction with CO lead to the in-situ synthesis of Pd nanosheets inside of the hydrophobic core of the polymeric micelles. This methodology is highly efficient to yield all polymeric nanoparticles loaded with Pd nanosheets as detected by electron microscopy and energy-dispersive X-ray spectroscopy. The cell viability of these Pd nanosheets-containing polymeric nanoparticles has been evaluated using five cell lines, showing a high cytocompatibility at the tested concentrations without detrimental effects in cell membrane and nuclei. Furthermore, the use of these hybrid polymeric nanoparticles as photothermal transductors has been evaluated using NIR as irradiation source, as well as its application in photothermal therapy using different cell lines demonstrating a high efficiency in all cell cultures. This article is protected by copyright. All rights reserved.

Polymeric nanostructures based on azobenzene and their biomedical applications: synthesis, self-assembly and stimuli-responsiveness

Amphiphilic polymers can self-assemble to form nanoparticles with different structures under suitable conditions. Polymer nanoparticles functionalized with aromatic azo groups are endowed with photo-responsive properties. In recent years, a variety of photoresponsive polymers and nanoparticles have been developed based on azobenzene, using different molecular design strategies and synthetic routes. This article reviews the progress of this rapidly developing research field, focusing on the structure, synthesis, assembly and response of photo-responsive polymer assemblies. According to the molecular structure, photo-responsive polymers can be divided into linear polymers containing azobenzene in a side chain, linear polymers containing azobenzene in the main chain, linear polymers containing azobenzene in an end group, branched polymers containing azobenzene and supramolecular polymers containing azobenzene. These systems have broad biomedical application prospects in the field of drug delivery and imaging applications.

Supramolecular Functionalizable Linear-Dendritic Block Copolymers for the Preparation of Nanocarriers by Microfluidics

Hybrid linear-dendritic block copolymers (LDBCs) having dendrons with a precise number of peripheral groups that are able to supramolecular bind functional moieties are challenging materials as versatile polymeric platforms for the preparation of functional polymeric nanocarriers. PEG2k-b-dxDAP LDBCs that are based on polyethylene glycol (PEG) as hydrophilic blocks and dendrons derived from bis-MPA having 2,6-diacylaminopyridine (DAP) units have been efficiently synthesized by the click coupling of preformed blocks, as was demonstrated by spectroscopic techniques and mass spectrometry. Self-assembly ability was first checked by nanoprecipitation. A reproducible and fast synthesis of aggregates was accomplished by microfluidics optimizing the total flow rate and phase ratio to achieve spherical micelles and/or vesicles depending on dendron generation and experimental parameters. The morphology and size of the self-assemblies were studied by TEM, Cryogenic Transmission Electron Microscopy (cryo-TEM), and Dynamic Light Scattering (DLS). The cytotoxicity of aggregates synthesized by microfluidics and the influence on apoptosis and cell cycle evaluation was studied on four cell lines. The self-assemblies are not cytotoxic at doses below 0.4 mg mL-1. Supramolecular functionalization using thymine derivatives was explored for reversibly cross-linking the hydrophobic blocks. The results open new possibilities for their use as drug nanocarriers with a dynamic cross-linking to improve nanocarrier stability but without hindering disassembly to release molecular cargoes.

Using High Molecular Precision to Study Enzymatically Induced Disassembly of Polymeric Nanocarriers: Direct Enzymatic Activation or Equilibrium-Based Degradation?

Enzyme-responsive polymers and their assemblies offer great potential to serve as key materials for the design of drug delivery systems and other biomedical applications. However, the utilization of enzymes to trigger the disassembly of polymeric amphiphiles, such as micelles, also suffers from the limited accessibility of the enzyme to moieties that are hidden inside the assembled structures. In this Perspective, we will discuss examples for the utilization of high molecular precision that dendritic structures offer to study the enzymatic degradation of polymeric amphiphiles with high resolution. Up to date, several different amphiphilic systems based on dendritic blocks have all shown that small changes in the hydrophobicity and amphiphilicity strongly affected the degree and rate of enzymatic degradation. The ability to observe the huge effects due to relatively small variations in the molecular structure of polymers can explain the limited enzymatic degradation that is often observed for many reported polymeric assemblies. The observed trends imply that the enzymes cannot reach the hydrophobic core of the micelles, and instead, they gain access to the amphiphiles by the unimer–micelle equilibrium, making the unimer exchange rate a key parameter in tuning the enzymatic degradation rate. Several approaches that are aimed at overcoming the stability–responsiveness challenge are discussed as they open the way to the design of stable and yet enzymatically responsive polymeric nanocarriers.

Overcoming Biological Barriers With Block Copolymers-Based Self-Assembled Nanocarriers. Recent Advances in Delivery of Anticancer Therapeutics

Cancer is one of the most common life-threatening illness and it is the world's second largest cause of death. Chemotherapeutic anticancer drugs have many disadvantages, which led to the need to develop novel strategies to overcome these shortcomings. Moreover, tumors are heterogenous in nature and there are various biological barriers that assist in treatment reisistance. In this sense, nanotechnology has provided new strategies for delivery of anticancer therapeutics. Recently, delivery platforms for overcoming biological barriers raised by tumor cells and tumor-bearing hosts have been reported. Among them, amphiphilic block copolymers (ABC)-based self-assembled nanocarriers have attracted researchers worldwide owing to their unique properties. In this work, we addressed different biological barriers for effective cancer treatment along with several strategies to overcome them by using ABC-based self-assembled nanostructures, with special emphasis in those that have the ability to act as responsive nanocarriers to internal or external environmental clues to trigger release of the payload. These nanocarriers have shown promising properties to revolutionize cancer treatment and diagnosis, but there are still challenges for their successful translation to clinical applications.

A general method to greatly enhance ultrasound-responsiveness for common polymeric assemblies

Ultrasound-controlled drug release is a very promising technique for controlled drug delivery due to the unique advantages of ultrasound as the stimulus.

Polymeric Self-Assemblies Based on tetra-ortho-Substituted Azobenzene as Visible Light Responsive Nanocarriers

Most of reported polymeric light-responsive nanocarriers make use of UV light to trigger morphological changes and the subsequent release of encapsulated cargoes. Moving from UV- to visible-responsive units is interesting for the potential biomedical applications of these materials. Herein we report the synthesis by ring opening polymerization (ROP) of a series of amphiphilic diblock copolymers, into which either UV or visible responsive azobenzenes have been introduced via copper(I) catalyzed azide-alkyne cycloaddition (CuAAC). These copolymers are able to self-assemble into spherical micelles or vesicles when dispersed in water. The study of the response of the self-assemblies upon UV (365 nm) or visible (530 or 625 nm) light irradiation has been studied by Transmission Electron Microscopy (TEM), Cryogenic Transmission Electron Microscopy (Cryo-TEM), and Dynamic Light Scattering (DLS) studies. Encapsulation of Nile Red, in micelles and vesicles, and Rhodamine B, in vesicles, and its light-stimulated release has been studied by fluorescence spectroscopy and confocal microscopy. Appreciable morphological changes have been induced with green light, and the subsequent release of encapsulated cargoes upon green light irradiation has been confirmed.

Modular Synthetic Approach for Adjusting the Disassembly Rates of Enzyme-Responsive Polymeric Micelles

Self-assembled nanostructures and their stimuli-responsive degradation have been recently explored to meet the increasing need for advanced biocompatible and biodegradable materials for various biomedical applications. Incorporation of enzymes as triggers that can stimulate the degradation and disassembly of polymeric assemblies may be highly advantageous owing to their high selectivity and natural abundance in all living organisms. One of the key factors to consider when designing enzyme-responsive polymers is the ability to fine-tune the sensitivity of the platform toward its target enzyme in order to control the disassembly rate. In this work, a series of enzyme-responsive amphiphilic PEG-dendron hybrids with increasing number of hydrophobic cleavable end-groups was synthesized, characterized, and compared. These hybrids were shown to self-assemble in aqueous media into nanosized polymeric micelles, which could encapsulate small hydrophobic guests in their cores and release them upon enzymatic stimulus. Utilization of dendritic scaffolds as the responsive blocks granted ultimate control over the number of enzymatically cleavable end-groups. Remarkably, as we increased the number of end-groups, the micellar stability increased significantly and the range of enzymatic sensitivity spanned from highly responsive micelles to practically nondegradable ones. The reported results highlight the remarkable role of hydrophobicity in determining the micellar stability toward enzymatic degradation and its great sensitivity to small structural changes of the hydrophobic block, which govern the accessibility of the cleavable hydrophobic groups to the activating enzyme.

Linear-dendritic block copolymer for drug and gene delivery

Dendrimers as a new class of polymeric materials have a highly ordered branched structure, exact molecular weight, multivalency and available internal cavities, which make them extensively used in biology and drug-delivery. Concurrent with the development of dendrimers, much more attention is drawn to a novel block copolymer which combines linear chains with dendritic macromolecules, the linear-dendritic block copolymer (LDBC). Because of the different solubility of the contrasting regions, the amphiphilic LDBCs could self-assemble to form aggregates with special core-shell structures which exhibit excellent properties different from traditional micelles, such as lower critical micelle concentration, prolonged circulation in the bloodstream, better biocompatibility, and lower toxicity. The present review briefly describes the type of LDBC, the self-assembly behavior in solution, and the application in delivery system including the application as drug carriers and gene vectors. The interactions between block copolymers and drugs are also summarized to better understand the release mechanism of drugs from the linear-dendritic block copolymers.

Polymeric micelles from block copolymers containing 2,6-diacylaminopyridine units for encapsulation of hydrophobic drugs

New polymers are described that can form micelles in water and can be envisaged as nanocarriers for drug delivery applications.

Photoresponsive assemblies of linear-dendritic copolymers containing azobenzene in the dendron interior: the effect of the dendron structure on dye encapsulation and release

Linear-dendritic copolymers show differential dye encapsulation and photoinduced dye release based on the number and positions of azobenzenes in the dendritic backbone as well as substituents on the dendron periphery.

Reversible deformation-formation of a multistimuli responsive vesicle by a supramolecular peptide amphiphile

A systematic study of the ternary complex formation process for aromatic amino acids using ucurbit[8]uril (CB[8]) and a viologen amphiphile shows that the affinity of the amino acid needs to be higher or in a comparable range to that of CB[8] for the amphiphile in order to form the ternary complex. Based on these observations, a supramolecular peptide amphiphile and its corresponding vesicle are prepared using a peptide containing an azobenzene moiety. The azobenzene group at the N-terminus of the peptide served as the second guest for CB[8]. The vesicles obtained from this peptide amphiphile show response to a number of external triggers. The trans-cis isomerization of the azobenzene group upon irradiation with UV-light of 365 nm leads to the breakdown of the ternary complex and eventually to the disruption of the vesicle. The deformation-reformation of the vesicle can be controlled by illuminating the disrupted solution with light of 420 nm as it facilitates the cis-trans isomerization. Thus, the vesicle showed a controlled and reversible response to UV-light with the ability for manipulation of the formation-deformation of the vesicle by the choice of an appropriate wavelength. The vesicle showed response to a stronger guest (1-adamantylamine) for CB[8], which displaces both the guests from the CB[8] cavity and consequently ruptures the vesicle structure. 2,6-Dihydroxynaphthalene acts as a competitive guest and thereby behaves as another external trigger for replacing the peptide from the CB[8] cavity by self-inclusion to form the ternary complex. Henceforth, it allows retaining the vesicle structure and results in the release of the peptide from the vesicle.

Crystallization-Driven Self-Assembly of Rod-Coil-Rod Pseudopolyrotaxanes into Spherical Micelles, Nanorods, and Nanorings in Aqueous Solutions

A novel rod-containing block copolymer is constructed by supramacromolecular self-assembly of α-cyclodextrin and a triblock copolymer with methoxy polyethylene glycol as the flanking chains and the midterm block alternately connected by 2,2-dimethylolbutyric acid and isophorone diisocyanate. The assembled rod-containing block copolymer shows an exciting phenomenon of concentration- and pH-dependent morphological switching of well-defined nanostructures. In the solutions at pH 9.2, spherical micelles, rod-like micelles, and hydrogel are observed successively with an increase of the concentration. Notably, the rod-like micelles are composed of spherical segments due to the combination of the crystalline cores of the spherical micelles. In addition, 1D nanostructures with different curvatures from linear rod-like micelles (pH 9.2) to ring-shaped micelles (pH 7.5) can be obtained by controlling the pH values of the assembled systems.

Synthesis, characterization and association behavior of linear-dendritic amphiphilic diblock copolymers based on poly(ethylene oxide) and a dendron derived from 2,2′-bis(hydroxymethyl)propionic acid

Two new amphiphilic linear-dendritic block copolymers have been synthesized and characterized. And their association behaviors have also been studied.

Light induced micelle to vesicle transition in an aqueous solution of a surface active ionic liquid

A new simple surface active ionic liquid displayed reversible micelle–vesicle transition under alternative UV/vis irradiation without additives.

Self-assembly of an azobenzene-containing polymer prepared by a multi-component reaction: supramolecular nanospheres with photo-induced deformation properties

In this article, we have synthesized a polymer containing regulated azobenzene groups by one-pot multi-component polymerization (MCP) based on Passerini reaction, and investigated its self-assembly behavior and photo-induced deformation properties. We found that this molecule can form spherical structures with sizes ranging from hundreds of nanometers to several micrometers when dissolved in THF. NMR and FTIR studies indicate that there are associated hydrogen bonds among the molecules in the aggregates, which are responsible for the formation of the nanospheres. By controlling the stirring rate as the THF suspension is dropped into water, the nanospheres can be sorted according to their size. In this way, we have obtained nanospheres with relatively uniform diameter. When irradiated by UV light in the aqueous medium, the nanospheres tend to aggregate into large clusters, while in dry state they are ready to merge into island-like structures, showing a good photo-induced deformation property.

Responsive linear-dendritic block copolymers

The combination of dendritic and linear polymeric structures in the same macromolecule opens up new possibilities for the design of block copolymers and for applications of functional polymers that have self-assembly properties. There are three main strategies for the synthesis of linear-dendritic block copolymers (LDBCs) and, in particular, the emergence of click chemistry has made the coupling of preformed blocks one of the most efficient ways of obtaining libraries of LDBCs. In these materials, the periphery of the dendron can be precisely functionalised to obtain functional LDBCs with self-assembly properties of interest in different technological areas. The incorporation of stimuli-responsive moieties gives rise to smart materials that are generally processed as self-assemblies of amphiphilic LDBCs with a morphology that can be controlled by an external stimulus. Particular emphasis is placed on light-responsive LDBCs. Furthermore, a brief review of the biomedical or materials science applications of LDBCs is presented.

Synthetic biodegradable functional polymers for tissue engineering: a brief review

Scaffolds play a crucial role in tissue engineering. Biodegradable polymers with great processing flexibility are the predominant scaffolding materials. Synthetic biodegradable polymers with well-defined structure and without immunological concerns associated with naturally derived polymers are widely used in tissue engineering. The synthetic biodegradable polymers that are widely used in tissue engineering, including polyesters, polyanhydrides, polyphosphazenes, polyurethane, and poly (glycerol sebacate) are summarized in this article. New developments in conducting polymers, photoresponsive polymers, amino-acid-based polymers, enzymatically degradable polymers, and peptide-activated polymers are also discussed. In addition to chemical functionalization, the scaffold designs that mimic the nano and micro features of the extracellular matrix (ECM) are presented as well, and composite and nanocomposite scaffolds are also reviewed.

Self-assembly modulation in ionic PAMAM derivatives

The self-assembly behaviour both in the bulk and water of a series of amphiphilic dendrimers constituted by second generation PAMAM ionically functionalized with different amounts of myristic acid is shown here. The number of acids in the dendrimer determines the liquid-crystal properties and the structural parameters of their supramolecular organization. Most of them present mesomorphism, organizing in a smectic A mesophase, with a layer spacing decreasing when increasing the number of acids. All these dendrimers form well-defined nanoobjects in water. Micelles and broken lamellae have been found for compounds with low acid contents. In contrast, dendrimers with higher fatty acid contents self-assemble forming nanospheres with a lamellar nanostructure. All compounds are able to trap the hydrophobic molecule 9,10-diphenylanthracene independent of the acid contents. Interestingly, the trapped hydrophobic molecule dominates the self-assembly trend of the dendrimers with low acid contents and thus different nanoobjects are found after the encapsulation.

PEG-Polypeptide Dual Brush Block Copolymers: Synthesis and Application in Nanoparticle Surface PEGylation

Amphiphilic polypeptide-containing hybrid dual brush block copolymers with controlled molecular weights and narrow molecular weight distributions were synthesized in one pot via ring-opening metathesis polymerization of sequentially added norbornyl-PEG and N-(2-((trimethylsilyl)amino)ethyl)-5-norbornene-endo-2,3-dicarboximide (M1) followed by ring-opening polymerization of amino acid N-carboxyanhydrides. Polylactide nanoparticles coated with these am phiphilic dual brush block copolymers showed significantly improved stability in PBS solution compared to those coated with amphiphilic linear block copolymers such as PEG-polylactide and PEG-polypeptides.