A zwitterionic probe for ratiometric fluorescent detection of aluminium(III) ion in aqueous medium and its application in bioimaging

In the present study, we have synthesized an aminobenzoic acid containing Schiff base (compound 1) and its structure was confirmed through single crystal X-ray study. Importantly, the compound 1 crystallizes in the zwitterionic form, with an anionic carboxylate group (-COO-) and a cationic iminium group (-C = NH+-). The compound 1 is highly soluble in water due to its zwitterionic feature in the solid state. Interestingly, compound 1 acts as a ratiometric fluorescent probe for the selective detection of Al3+ ion in aqueous solution without organic cosolvent. It can also detect Al3+ ion by visual colour change to bluish-green fluorescence under 365 nm UV light. The association constant between compound 1 with Al3+ ion was estimated to be 1.67 × 104 M-1. The lowest detection limit for Al3+ ion was calculated to be 7.05 × 10-8 M in water. Compound 1 in combination with Al3+ ion demonstrated fluorescent imaging potential of the nucleus of in RAW 264.7 murine macrophage cell line. In addition, the sensing model is developed as paper based sensor ''Test Kit' 'for its practical applicability.

A chemodosimetric approach for the visual detection of nerve agent simulant diethyl chlorophosphate (DCP) in liquid and vapour phase

In this work, a novel fluorescent ratiometric switch, 8-((6-(1H-benzo[d]imidazol-2-yl)pyridin-2-yl)methoxy)quinoline (BIPQ), has been introduced for sensing an organophosphorus (OP) chemical vapor threat, diethyl chlorophosphate (DCP), the low-toxic mimic of the real nerve agent sarin (GB). BIPQ is efficient at detecting DCP in both solution and gaseous phase and has potential practical application with high sensitivity and selectivity. The probe shows significant ratiometric emission in the presence of DCP along with a distinct color change from blue to cyan under UV light. The sensing mechanism of the chemodosimeter is based on the generation of a new adduct, BIPQ-DCP, through a nucleophilic substitution reaction with DCP followed by a ring-closure process to form the final product. The detection limit of BIPQ for DCP was determined to be in the order of 10-8 (M) in the liquid state. DFT and TDDFT computational techniques were carried out in order to interpret the electronic properties theoretically.

Recent developments in the creation of a single molecular sensing tool for ternary iron (III), chromium (III), aluminium (III) ionic species: A review

Rational design of a molecular sensing tool is an important topic in molecular recognition, signalling, and optoelectronics that has piqued the interest of chemists, biologists, and environmental scientists. Approximately 150 years have passed since the beginning of the fluorescent chemosensor sector. Due to the paramagnetic properties of Cr3+ and Al3+ , it is tough to prepare a photoluminescence plug-in detector. Most dye-based Al3+ sensors must be utilized in organic or mixed solvents for robust hydration of Al3+ in water. The sophisticated molecular design of sensors, conversely, allows for the detection of these metal ions in aqueous medium. The design of chemosensors using various fluorophores and their mechanisms of action have been thoroughly discussed. A literature survey covering the design of chemosensors and their mechanisms of action have been thoroughly discussed covering the period 2010-2022 and that was carried out including innovative and exemplary activities from numerous groups throughout the world that have significantly contributed to this sector. The most important advantages of these probes are their aqueous solubility and quick response with outstanding selectivity and sensitivity for temporal distribution with high fidelity of metals in living cells.

Sulfonamide functionalized silica nano-composite: characterization and fluorescence "turn-on" detection of Fe3+ ions in aqueous samples

We have synthesized novel sulfonamide-based nano-composite (SAN) for selective and sensitive detection of Fe³⁺ ions in aqueous samples. Morphological characterization of SAN was carried out with TGA, FT-IR, UV-Vis, ninhydrin assay, FE-SEM, pXRD, BET, EDX, and elemental analysis. The sensing nature, effect of pH, sensor concentration and response time analysis were accomplished with the help of emission spectral studies and SAN was assessed as "turn-on" emission detector for the biologically important Fe³⁺ ions. Here, the LOD and LOQ were computed to be 26.68 nM and 88.93 nM, respectively, and it was found to be much lower than the permissible limit of Fe³⁺ ions in drinking water. The accuracy of the sensor (SAN) was determined by testing the aqueous samples spiked with known concentrations of Fe³⁺ ions and results demonstrated 98.00-99.66% recovery, which made SAN a reliable, selective and sensitive chemosensor for the quantification of Fe³⁺ ions in fully aqueous media.

A Water-Stable Zn-MOF Used as Multiresponsive Luminescent Probe for Sensing Fe3+/Cu2+, Trinitrophenol and Colchicine in Aqueous Medium

A water-stable Zn-MOF was constructed based on H₂PBA and 1, 10-phenanthroline under solvothermal conditions. The compound exhibited a 3D (2,3,8)-connected (4³)₂(4⁶.6⁶.8¹⁵.12)(8) topology framework. The crystal structure and phase purity of the compound was verified by single crystal X-ray diffraction. Subsequently, some studies on the morphology, structure, and luminescent properties were carried out. The results showed that this compound could be used as a versatile chemosensor for Fe³⁺/Cu²⁺, trinitrophenol and colchicine via a luminescence quenching effect in an aqueous medium.

An Indole-Based Fluorescent Chemosensor for Detecting Zn2+ in Aqueous Media and Zebrafish

An indole-based fluorescent chemosensor IH-Sal was synthesized to detect Zn²⁺. IH-Sal displayed a marked fluorescence increment with Zn²⁺. The detection limit (0.41 μM) of IH-Sal for Zn²⁺ was greatly below that suggested by the World Health Organization. IH-Sal can quantify Zn²⁺ in real water samples. More significantly, IH-Sal could determine and depict the presence of Zn²⁺ in zebrafish. The detecting mechanism of IH-Sal toward Zn²⁺ was illustrated by fluorescence and UV–visible spectroscopy, DFT calculations, ¹H NMR titration and ESI mass.

A Multifunctional 3D Supermolecular Co Coordination Polymer With Potential for CO2 Adsorption, Antibacterial Activity, and Selective Sensing of Fe3+/Cr3+ Ions and TNP

A 3D supermolecular structure [Co₃(L)₂ (2,2′-bipy)₂](DMF)₃(H₂O)₃ 1) (H₃L = 4,4′,4″-nitrilotribenzoic acid) has been constructed based on H₃L, and 2,2′-bipy ligands under solvothermal conditions. Compound 1 can be described as a (3, 6)-connected kgd topology with a Schläfli symbol (4³)₂(4⁶.6⁶.8³) formed by [Co₃(CO₂)₆] secondary building units. The adsorption properties of the activated sample 1a has been studied; the result shows that 1a has a high adsorption ability: the CO₂ uptakes were 74 cm³·g⁻¹ at 273 K, 50 cm³·g⁻¹ at 298 K, the isosteric heat of adsorption (Q_st) is 25.5 kJ mol⁻¹ at zero loading, and the N₂ adsorption at 77 K, 1 bar is 307 cm³ g⁻¹. Magnetic measurements showed the existence of an antiferromagnetic exchange interaction in compound 1, besides compound 1 exhibits effective luminescent performance for Fe³⁺/Cr³⁺ and TNP.

Selective anions mediated fluorescence "turn-on", aggregation induced emission (AIE) and lysozyme targeting properties of pyrene-naphthalene sulphonyl conjugate

We have designed and synthesized a novel pyrene-naphthalene sulphonyl conjugate, 1-((1Z)-(4-((Z)-4-(pyrene-1-yl)methyleneamino)phenylsulfonyl)phenylimino)methyl)naphthalene-2-ol (PSN) through a facile two-step reactions. It was characterized by various spectral techniques. Fluorescence spectral studies showed that compound PSN featured fluorescence enhancement upon increasing the water content in THF. This can be attributed to the phenomena of aggregated induced emission (AIE), which is confirmed by SEM and AFM studies, due to the restriction of CHN isomerization of PSN. The anion sensing of PSN was examined with various anions. Among these anions, H₂PO₄^- and F^- ions were selectively sensing with a low detection limit of 3.52 × 10^-7 M and 7.23 × 10^-7 M, respectively, and an obvious color change from yellow to orange was observed by the naked eye. The mechanism of sensing involved the formation of hydrogen bonding interaction between O-H group of PSN and H₂PO₄^-/ F^- ions. The binding of PSN with LYZ was also examined by docking studies, which shows that H-bonding and hydrophobic interactions play crucial roles for the interaction of LYZ toward PSN.

2-Hydroxynaphthalene based acylhydrazone as a turn-on fluorescent chemosensor for Al3+ detection and its real sample applications

Developing high performance fluorescent chemosensor for Al³⁺ detection is highly desirable, due to the excess of Al³⁺ will lead to many diseases. In this paper, a simple 2-hydroxynaphthalene-based fluorescent chemosensor has been synthesized and characterized by different spectroscopic methods. The compound exhibited an "turn-on-type" fluorescent chemosensing for the detection of Al³⁺, which was ascribed to the chelation-enhanced fluorescence (CHEF). The high selectivity and sensitivity of the compound for Al³⁺ were verified by fluorescence spectra in its DMF solution, and the enhancement of fluorescent intensity could be observed by naked-eye from non-fluorescence to green light. The detection limit of the compound for Al³⁺ was found to be 4.22 × 10^-8 M and the stability constant was 4.82 × 10⁴ M^-1. The 1:1 binding stoichiometry of the compound to Al³⁺ was confirmed from the Job's plot based on fluorescence titrations. Additionally, the sensing process of the compound to Al³⁺ was chemically reversible by adding Na₂EDTA. Importantly, the probe was successfully applied to quantitative analysis of Al³⁺ in real drug and potable water samples.

A multi-functional picolinohydrazide-based chemosensor for colorimetric detection of iron and dual responsive detection of hypochlorite

A novel effective chemosensor HPHN, (E)-6-hydroxy-N'-((2-hydroxynaphthalen-1-yl)methylene) picolinohydrazide, was synthesized. HPHN sensed Fe^3+/2+ with the changes of color from yellow to orange without obvious inhibition from other cations. In addition, HPHN could detect ClO^- by both the color change from yellow to colorless and the fluorescence quenching. The binding modes of HPHN with Fe^3+/2+ and ClO^- were determined to be 1:1 with Job plot and ESI-mass analysis. HPHN displayed low detection limits of 0.29 μM for Fe³⁺ and 0.77 μM for Fe²⁺. For ClO^-, the detection limit was 6.20 μM by colorimetric method and 3.99 μM by fluorescent one, respectively. Moreover, HPHN can be employed to quantify Fe³⁺ and ClO^- in environmental samples and apply to cell imaging for ClO^-.

FRET based ratiometric switch for selective sensing of Al3+ with bio-imaging in human peripheral blood mononuclear cells

FRET based ratiometric switch for selective sensing of Al³⁺ with bio-imaging in human peripheral blood mononuclear cells (PBMCs).

A Thiourea-Containing Fluorescent Chemosensor for Detecting Ga3

A thiourea-based fluorescent chemosensor NADA, (E)-2-(4-(diethylamino)-2-hydroxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, has been designed and synthesized. NADA could detect Ga³⁺ through a fluorescent turn-on with a low detection limit (0.29 μM). Importantly, NADA could effectively discriminate Ga³⁺ from Al³⁺ and In³⁺. The binding mechanism of NADA with Ga³⁺ was identified by ESI-mass, NMR titration, and DFT calculations.

Switching of Fluorescent Zn/Cd Selectivity in N,N,N',N'-Tetrakis(6-methoxy-2-quinolylmethyl)-1,2-diphenylethylenediamine by One Asymmetric Carbon Atom Inversion

A quinoline-based hexadentate ligand, (S,S)-N,N,N',N'-tetrakis(6-methoxy-2-quinolylmethyl)-1,2-diphenylethylenediamine ((S,S)-6-MeOTQPh₂EN), exhibits fluorescence enhancement at 498 nm upon addition of 1 equiv of Zn²⁺ (I_Zn/I₀ = 12, φ_Zn = 0.047) in aqueous DMF solution (DMF/H₂O = 2:1). Addition of 1 equiv of Cd²⁺ affords a much smaller fluorescence increase at the same wavelength (I_Cd/I₀ = 2.5, I_Cd/I_Zn = 21%). The trivalent metal ions such as Al³⁺, Cr³⁺, and Fe³⁺ also exhibit fluorescence enhancement at 395 nm (I_Al/I₀ = 22, I_Cr/I₀ = 6 and I_Fe3+/I₀ = 13). In contrast, meso-6-MeOTQPh₂EN exhibits a Cd²⁺-selective fluorescence increase at 405 nm in the presence of 1 equiv of metal ion (I_Cd/I₀ = 11.5, φ_Cd = 0.022), while Zn²⁺ induces a smaller fluorescent response under the same experimental conditions (I_Zn/I₀ = 3.3, I_Zn/I_Cd = 29%). In this case, the fluorescence intensities of meso-6-MeOTQPh₂EN in the presence of a large amount of Zn²⁺ and Cd²⁺ become similar. This diastereomer-dependent, fluorescent metal ion specificity is derived from the Zn²⁺-specific intramolecular excimer formation in (S,S)-6-MeOTQPh₂EN-Zn²⁺ complex and higher binding affinity of meso-6-MeOTQPh₂EN with Cd²⁺ in comparison to Zn²⁺. The more conformationally restricted diastereomeric pair, namely, cis- and trans-TQDACHs (cis- and trans-N,N,N',N'-tetrakis(2-quinolylmethyl)-1,2-diaminocyclohexanes), both exhibit Zn²⁺-specific fluorescence enhancement because of the high metal binding affinity and intramolecular excimer forming property derived from the rigid DACH backbone.

Triazatruxene-Rhodamine-Based Ratiometric Fluorescent Chemosensor for the Sensitive, Rapid Detection of Trivalent Metal Ions: Aluminium (III), Iron (III) and Chromium (III)

We investigated the ability of a novel triazatruxene-rhodamine-based (TAT-ROD) chemosensor to detect the trivalent metal ions aluminium (Al³⁺), iron (Fe³⁺) and chromium (Cr³⁺). Operating via the through-bond energy transfer (TBET) pathway, the chemosensor exhibited low detection limits of 23.0, 25.0 and 170.0 nM for Al³⁺, Fe³⁺ and Cr³⁺, respectively, along with high sensitivity and selectivity during a brief period (<15 s). The binding ratio of the chemosensor and trivalent metal ions achieved by Job's method was 3:1, and when we added ethylenediaminetetraacetic acid (EDTA), the sensing process reversed. Altogether, our TAT-ROD chemosensor marks the first triazatruxene-based colorimetric and fluorometric metal ion sensor reported in the literature.

A lysosome-targetable fluorescent probe for imaging trivalent cations Fe3+, Al3+ and Cr3+ in living cells

An effective morpholine-type naphthalimide chemsensor, N-p-chlorophenyl-4-(2-aminoethyl)morpholine-1,8-naphthalimide (CMN) has been developed as a lysosome-targeted fluorometric sensor for trivalent metal ions (Fe³⁺, Al³⁺ and Cr³⁺). Upon the addition of Fe³⁺, Al³⁺ or Cr³⁺ ions, the probe CMN showed an evident naked-eye color changes which pale yellow solution of CMN turned deepened and it displayed turn-on fluorescence response in methanol. CMN showed a significant selective and sensitive toward Fe³⁺, Al³⁺ or Cr³⁺ ions, while there was no obvious behavior to other monovalent or divalent metal ions from the UV-vis and fluorescence spectrum. Based on the Job's plot analyses the 1:1 coordination mode of CMN with Fe³⁺, Al³⁺ or Cr³⁺ was proposed. The limit of detection (LOD) observed were 0.65, 0.69 and 0.68 μM for Fe³⁺, Al³⁺ and Cr³⁺ ions, respectively. The N-atom of morpholine directly involved in complex formation, CMN emitted fluorescence through inhibition of photoinduced electron transfer (PET). This probe exhibited excellent imaging ability for Fe³⁺, Al³⁺and Cr³⁺ ions in living cells with low cytotoxicity. Significantly, the cellular confocal microscopic research indicated that the lysosome-targeted group of morpholine moiety was introduced which realized the capability of imaging lysosomal trivalent metal ions in living cells for the first time.

Dual recognition of Al3+ and Zn2+ ions by a novel probe based on diarylethene and its application

We synthesized a new fluorescent probe 1O by attaching a diarylethene molecule to a functional group. The probe can be used to detect Al3+ and Zn2+ at the same time with high selectivity, and its detection limit is very low. When Al3+ was added, the fluorescence intensity was increased 310 folds, and was accompanied by a fluorescent color change from black to grass-green. Similarly, after the addition of Zn2+, the fluorescence intensity was enhanced 110 folds, with a concomitant color change from black to yellow-green. Moreover, based on the properties of 1O, we designed a logic circuit, and that also can be used for water sample testing.

Iron detection and remediation with a functionalized porous polymer applied to environmental water samples

Iron is one of the most abundant elements in the environment and in the human body. As an essential nutrient, iron homeostasis is tightly regulated, and iron dysregulation is implicated in numerous pathologies, including neuro-degenerative diseases, atherosclerosis, and diabetes. Endogenous iron pool concentrations are directly linked to iron ion uptake from environmental sources such as drinking water, providing motivation for developing new technologies for assessing iron(ii) and iron(iii) levels in water. However, conventional methods for measuring aqueous iron pools remain laborious and costly and often require sophisticated equipment and/or additional processing steps to remove the iron ions from the original environmental source. We now report a simplified and accurate chemical platform for capturing and quantifying the iron present in aqueous samples through use of a post-synthetically modified porous aromatic framework (PAF). The ether/thioether-functionalized network polymer, PAF-1-ET, exhibits high selectivity for the uptake of iron(ii) and iron(iii) over other physiologically and environmentally relevant metal ions. Mössbauer spectroscopy, XANES, and EXAFS measurements provide evidence to support iron(iii) coordination to oxygen-based ligands within the material. The polymer is further successfully employed to adsorb and remove iron ions from groundwater, including field sources in West Bengal, India. Combined with an 8-hydroxyquinoline colorimetric indicator, PAF-1-ET enables the simple and direct determination of the iron(ii) and iron(iii) ion concentrations in these samples, providing a starting point for the design and use of molecularly-functionalized porous materials for potential dual detection and remediation applications.

A Highly Selective and Sensitive Fluorescent Chemosensor for Detecting Al3+ Ion in Aqueous Solution and Plant Systems

The solubilized form of aluminum, Al³⁺, is present under acid soil conditions and toxic to both animals and plants. Detecting and quantifying Al³⁺ is vital for both chemistry and biology. A new Schiff-based fluorescent turn-on sensor (probe L) for the selective detection of the Al³⁺ ion was synthesized by coupling 2-hydroxy-1-naphthaldehyde and 2-aminoisoindoline-1,3-dione, and the structure was characterized by nuclear magnetic resonance spectra. The probe L exhibited an excellent selective and sensitive response to the Al³⁺ ion over other metal ions in DMSO-H₂O (1:9 v/v). Fluorescence quantification revealed that probe L was promising for the detection and accumulation of Al³⁺. Treating rice seedlings with Al³⁺ at 25–200 μM inhibited their growth. Al³⁺ treatment produced reactive oxygen species in rice roots. Practical applications of the fluorescent probe for the quantification of Al³⁺ in water samples and rice seedlings are demonstrated. Detecting the Al³⁺ ion with the probe L is easy and a potential alternative to existing analytical methods. The method can be used for detecting the Al³⁺ content of aqueous solution and plant systems. The novel fluorescent probe L has good potential for monitoring Al³⁺ content in the environment and biological systems.

Selective Sensing of Iron by Pyrrolo[2,3-c]Quinolines

This paper reports development of an iron sensor, 2-(3H-pyrrolo[2,3-c]quinolin-4-yl)aniline (APQ). The fluorophore facilitates micromolar detection of Fe³⁺/Fe²⁺ in the presence of various cations, including well-known interfering cations Co²⁺and Cu²⁺ by the process of fluorescence quenching. Graphical Abstract.

Facile detection of organophosphorus nerve agent mimic (DCP) through a new quinoline-based ratiometric switch

Here a new quinoline-based (BIMQ) probe was developed which displayed ratiometric detection of organophosphorus chemical vapor threat, DCP.

A naphthalene-quinoline based chemosensor for fluorescent "turn-on" and absorbance-ratiometric detection of Al3+ and its application in cells imaging

A new naphthalene-quinoline based chemosensor L was prepared and structurally characterized. L exhibited excellent selectivity and sensitivity to Al³⁺ through distinct fluorescence enhancement (335-fold) and ratiometric detection in DMF/H₂O (v/v, 1/9) based on the combined mechanisms of ESIPT and CHEF. The recognizing behavior of L toward Al³⁺ had been investigated in detail through Job's Plot, FT-IR, HNMR, and HRMS analysis. The limit of detection (LOD) for Al³⁺ was as low as and 3.67 × 10^-8 M. L was successfully applied in real sample detection and construction of molecular logic gate. Moreover, L was verified to be of low cytotoxicity and good imaging characteristics for the detection of Al³⁺ in cells HSC.

A dipodal molecular probe for naked eye detection of trivalent cations (Al3+, Fe3+and Cr3+) in aqueous medium and its applications in real sample analysis and molecular logic gates

A simple and low cost multifunctional colorimetric receptor L has been designed, synthesized and characterized by 1H-NMR, IR spectroscopy, ESI-MS spectrometry and elemental analysis. The chemosensor L can selectively detect three biologically and environmentally important trivalent metal ions (Al3+, Fe3+and Cr3+) both visually and spectrophotometrically in CH3CN-H2O (1 : 1, v/v) solution in the presence of other biologically relevant metal ions. The Job's plot analyses indicate the 2 : 2 binding stereochemistry for Al3+, Fe3+ and Cr3+ ions with L, which was further confirmed by 1H-NMR and ESI-MS studies. The binding constant values were found to be 2.9 × 104 M-1 for Al3+, 1.079 × 105 M-1 for Fe3+ and 1.366 × 105 M-1 for Cr3+ respectively. The detections limits of the sensor for Al3+ (2.8 × 10-7 M), Fe3+ (1.9 × 10-7 M) and Cr3+ (2.5 × 10-7 M) are far below than the limit set by the World Health Organization (WHO) for drinking water. Moreover, colorimetric test kits for rapid detection of Al3+, Fe3+, and Cr3+ could be successively applied for all practical purposes, indicating its potential use in environmental samples. It has also been used in building molecular logic gates.

Coplanarity driven fluorescence turn-on sensor for chromium(iii) and its application for bio-imaging

The sensing behaviour of benzimidazole and thiozole derivatives from heteroaromatic aldehyde was studied towards various cations and anions. S1 showed selectivity towards Cr³⁺ with fluorescence enhancement and live cell imaging of Hela cells was successfully demonstrated.

Sensitive ratiometric detection of Al(iii) ions in a 100% aqueous buffered solution using a fluorescent probe based on a peptide receptor

The peptidyl bioprobe detected Al(iii) ions sensitively in a 100% aqueous buffered solution through ratiometric response.

Triphenylamine–benzimidazole based switch offers reliable detection of organophosphorus nerve agent (DCP) both in solution and gaseous state

Triphenylamine-conjugated imidazole dye acts as a potential sensor for the liquid and vapour phase detection of nerve agent simulantDCP.

A rhodamine based fluorescent trivalent sensor (Fe3+, Al3+, Cr3+) with potential applications for live cell imaging and combinational logic circuits and memory devices

A novel sensor (HL5) recognizes sensitively and selectively trivalent metal ions M³⁺ (M = Al, Fe and Cr) with prominent enhancement in emission intensities with logic gate circuits and memory devices with living cell imaging application.