Portable smartphone-assisted highly sensitive detection of mercury ions based on gold nanoparticle-modified NH2-UiO-66 metal-organic framework

A novel portable smartphone-assisted colorimetric method was reported for the determination of Hg2+ with good analytical performance. A Zr(IV)-based metal-organic framework functionalized with amino groups (NH2-UiO-66) has been adopted as a supporting platform to anchor gold nanoparticles (AuNPs), avoiding the migration and aggregation of AuNPs. With the addition of Hg2+, the formation of gold amalgam proved possible to enhance peroxidase-like activity of the composite (AuNPs/NH2-UiO-66), accelerating the oxidization of zymolyte 3,3',5,5'-tetramethylbenzidine (TMB). In the meantime, the color of the reaction solution turned a vivid blue, and the red, green, and blue (RGB) values of the solution color changed accordingly. On account of this strategy, the quantitative detection of Hg2+ could be achieved. After the optimization of the experiment conditions, the average color intensity (Ic) resulting from RGB values was linear related to the concentration of Hg2+ from 10 to 100 nM, accompanied with a detection limit (LOD) down to 5.4 nM calculated by 3σ/S. The successful application of the designed method has been promoted to detect Hg2+ in some water samples, displaying a great potential in practical application. Furthermore, the use of a smartphone made our proposed method simple and accurate, and thus puts forward a possible way for in situ and real-time monitoring.

Smartphone-Enabled Fluorescence and Colorimetric Platform for the On-Site Detection of Hg2+ and Cl- Based on the Au/Cu/Ti3C2 Nanosheets

Smartphone-assisted fluorescence and colorimetric methods for the on-site detection of Hg²⁺ and Cl^- were established based on the oxidase-like activity of the Au-Hg alloy on the surface of Au/Cu/Ti₃C₂ NSs. The Au nanoparticles (NPs) were constructed via in-situ growth on the surface of Cu/Ti₃C₂ NSs and characterized by different characterization techniques. After the addition of Hg²⁺, the formation of Hg-Au alloys could promote the oxidization of o-phenylenediamine (OPD) to generate a new fluorescence emission peak of 2,3-diaminopenazine (ADP) at 570 nm. Therefore, a turn-on fluorescence method for the detection of Hg²⁺ was established. As the addition of Cl^- can influence the fluorescence of ADP, the fluorescence intensity was constantly quenched to achieve the continuous quantitative detection of Cl^-. Therefore, a turn-off fluorescence method for the detection of Cl^- was established. This method had good linear ranges for the detection of Hg²⁺ and Cl^- in 8.0-200.0 nM and 5.0-350.0 µM, with a detection limit of 0.8 nM and 27 nM, respectively. Depending on the color change with the detection of Hg²⁺ and Cl^-, a convenient on-site colorimetric method for an analysis of Hg²⁺ and Cl^- was achieved by using digital images combined with smartphones (color recognizers). The digital picture sensor could analyze RGB values in concentrations of Hg²⁺ or Cl^- via a smartphone app. In summary, the proposed Au/Cu/Ti₃C₂ NSs-based method provided a novel and more comprehensive application for environmental monitoring.

Facile Synthesis of MXene-Ti3C2/Co Nanosheet Hydrogel Sensor with the Assistance of a Smartphone for On-Site Monitoring of Glucose in Beverages

A one-step cobaltous chloride (CoCl₂) molten salt method was employed to prepare multilayer MXene-Ti₃C₂/Co materials with further ultrasonic treatment to acquire single-layer MXene-Ti₃C_2/Co nanosheets (NSs). MXene-Ti₃C₂/Co NSs were characterized, and their enzyme-like activities were investigated. Under the catalysis of MXene-Ti₃C₂/Co NSs, 3,3',5,5'-tetramethylbenzidine (TMB) could be oxidized by H₂O₂, with the color changing from colorless to blue. The affinity of MXene-Ti₃C₂/Co NSs to H₂O₂ and TMB was better than that of nanozymes reported in previous studies. The MXene-Ti₃C₂/Co NSs were used for the colorimetric determination of H₂O₂/glucose, with limits of detection (LODs) of 0.033 mM and 1.7 μM, respectively. MXene-Ti₃C₂/Co NSs embedded in sodium alginate (SA) hydrogel were used to construct a sensor platform. The digital pictures combined with a smartphone-installed app (color recognizer) could be used to analyze RGB values for colorimetric detection of glucose in beverages. This point-of-care testing platform has the advantages of cost-effectiveness and good transferability, with the potential to realize quick, intelligent and on-site detection.

Microwave-Assisted Synthesis of Red Emitting Copper Nanoclusters Using Trypsin as a Ligand for Sensing of Pb2+ And Hg2+ Ions in Water and Tobacco Samples

In this work, a microwave assisted method was developed for synthesis of red fluorescent copper nanoclusters (NCs) using trypsin as a template (trypsin-Cu). The as-synthesized trypsin-Cu NCs are stable and water soluble, exhibiting fluorescence emission at 657 nm when excited at 490 nm. The as-prepared red-emitting trypsin-Cu NCs were characterized by using several analytical techniques such as ultraviolet-visible (UV-Vis) and fluorescence, fluorescence lifetime, Fourier transform infrared, and X-ray photoelectron spectroscopic techniques. Red-emitting trypsin-Cu NCs acted as a nanosensor for sensing both Pb2+ and Hg2+ ions through fluorescence quenching. Using this approach, good linearities are observed in the range of 0.1-25 and of 0.001-1 μM with the lower limit of detection of 14.63 and 56.81 nM for Pb2+ and Hg2+ ions, respectively. Trypsin-Cu NCs-based fluorescence assay was successfully applied to detect both Hg2+ and Pb2+ ions in water and tobacco samples.

Review of Dissolved Oxygen Detection Technology: From Laboratory Analysis to Online Intelligent Detection

Dissolved oxygen is an important index to evaluate water quality, and its concentration is of great significance in industrial production, environmental monitoring, aquaculture, food production, and other fields. As its change is a continuous dynamic process, the dissolved oxygen concentration needs to be accurately measured in real time. In this paper, the principles, main applications, advantages, and disadvantages of iodometric titration, electrochemical detection, and optical detection, which are commonly used dissolved oxygen detection methods, are systematically analyzed and summarized. The detection mechanisms and materials of electrochemical and optical detection methods are examined and reviewed. Because external environmental factors readily cause interferences in dissolved oxygen detection, the traditional detection methods cannot adequately meet the accuracy, real-time, stability, and other measurement requirements; thus, it is urgent to use intelligent methods to make up for these deficiencies. This paper studies the application of intelligent technology in intelligent signal transfer processing, digital signal processing, and the real-time dynamic adaptive compensation and correction of dissolved oxygen sensors. The combined application of optical detection technology, new fluorescence-sensitive materials, and intelligent technology is the focus of future research on dissolved oxygen sensors.

Inhibition of catalytic activity of fibrinogen-stabilized gold nanoparticles via thrombin-induced inclusion of nanoparticle into fibrin: Application for thrombin sensing with more than 104-fold selectivity

Citrate-capped gold nanoparticles (AuNPs) modified with thrombin-binding aptamer are often implemented for colorimetric, fluorescent, and electrochemical detection of thrombin in an aqueous solution. However, researchers have rarely explored the application of fibrinogen-modified AuNPs (F-AuNPs) for thrombin sensing. We present a simple, inexpensive, sensitive, and selective probe for colorimetric assay of thrombin through combining thrombin-induced inclusion of F-AuNPs into Fibrin and F-AuNPs-catalyzed reduction of 4-nitrophenol with an excess amount of NaBH₄. Considering that fibrinogen stabilized citrate-capped AuNPs against a high-ionic-strength buffer, F-AuNPs efficiently catalyzed the NaBH₄-mediated decrease of yellow 4-nitrophenol to colorless 4-aminophenol. The presence of thrombin converted fibrinogen into fibrin on the nanoparticle surface, leading to the inclusion of nanoparticles into fibrin. The formation of fibrin inhibited that the AuNPs catalyzed the NaBH₄-mediated reduction of 4-nitrophenol. Consequently, the color of the solution gradually varied from colorless to yellow with increasing thrombin concentration. The proposed system was shown to be accurate in the quantification of small differences in the concentration of human thrombin over the range of 4-60 pM. The lowest detectable concentration of human thrombin by the naked eye was as low as 16 pM. We demonstrated the practical application of the proposed system in quantifying 1-15 nM human thrombin in human plasma.

Sensitive Hg2+ Ion Detection Using Metal Enhanced Fluorescence of Novel Polyvinyl Pyrrolidone (PVP)-Templated Gold Nanoparticles

In this study, we report a straightforward strategy for Hg²⁺ ion detection. Fluorescent Au nanoparticles (NPs) were one-pot synthesized using a polymer (polyvinyl pyrrolidone [PVP]) as both capping and fluorescence agent. The as-synthesized PVP-Au NPs showed a remarkably rapid response selectively for Hg²⁺ ions compared to 14 other metal ions. The detection limit of Hg²⁺ was estimated at 100 nM. We discuss the emission and quenching mechanism of the PVP-Au NPs, the former being attributed to metal enhanced fluorescence and the latter being related to static quenching by Hg²⁺. The fluorescence of PVP-Au NPs offers an efficient and reliable strategy for Hg²⁺ ions detection. They therefore have a great potential for applications in health and environmental monitoring.

Highly Sensitive and Selective Colorimetric Detection of Methylmercury Based on DNA Functionalized Gold Nanoparticles

A new colorimetric detection of methylmercury (CH₃Hg⁺) was developed, which was based on the surface deposition of Hg enhancing the catalytic activity of gold nanoparticles (AuNPs). The AuNPs were functionalized with a specific DNA strand (H_T7) recognizing CH₃Hg⁺, which was used to capture and separate CH₃Hg⁺ by centrifugation. It was found that the CH₃Hg⁺ reduction resulted in the deposition of Hg onto the surface of AuNPs. As a result, the catalytic activity of the AuNPs toward the chromogenic reaction of 3,3,5,5-tetramethylbenzidine (TMB)-H₂O₂ was remarkably enhanced. Under optimal conditions, a limit of detection of 5.0 nM was obtained for CH₃Hg⁺ with a linear range of 10–200 nM. We demonstrated that the colorimetric method was fairly simple with a low cost and can be conveniently applied to CH₃Hg⁺ detection in environmental samples.

Fluorescence quenching of MoS2 nanosheets/DNA/silicon dot nanoassembly: effective and rapid detection of Hg2+ ions in aqueous solution

Mercury (Hg) contamination of aquatic sites represents a serious risk for human health and the environment. Therefore, effective and rapid monitoring of Hg in aqueous samples is a challenge of timely importance nowadays. In the present study, a rapid and sensitive mercury sensor based on the fluorescence quenching of MoS₂ nanosheets/DNA/silicon dot nanoassembly has been developed for the efficient detection of mercury(II) in aquatic environments. In this process, silicon dots were synthesized through one-step high-temperature calcinations and thermomagnesium reduction method at 900 °C using rice husk as a silicon source, which demonstrates superior photophysical properties and excitation-dependent fluorescence behavior. The interaction between MoS₂ nanosheets/DNA/silicon dot nanoassembly and Hg²⁺ ions was studied using photoluminescence spectroscopy. The addition of Hg²⁺ ions to the assay solution induced the detachment of fluorescent probe from the surface of MoS₂ nanosheets. Thus, the fluorescent probes sustained its fluorescence intensity. The developed sensor was tested on various concentrations of Hg²⁺ ions ranging from 0 to 1000 nM as well as on various metal ions. In addition, MoS₂ nanosheets/DNA/silicon dot nanoassembly fluorescent Hg sensor efficiently detected the presence of Hg²⁺ ions in real-time water samples, which was comparably detected by the conventional atomic absorbance spectrometer (AAS). Overall, our results highlighted the high reliability of the present approach for environmental monitoring of Hg²⁺ ions, if compared to that of the customary method with a lowest detection limit of 0.86 nM.

Analyte-triggered autocatalytic amplification combined with gold nanoparticle probes for colorimetric detection of heavy-metal ions

This work reports a new colorimetric nanosensor for the detection of heavy-metal ions that initially integrates analyte-triggered autocatalytic amplification with o-phenylenediamine-mediated aggregation of label-free gold nanoparticles. Its utility is well demonstrated with the simple, rapid, sensitive, and specific detection of Hg²⁺, Cu²⁺, and Ag⁺ targets with detection limits less than 3 nM.

A scanner-based colorimetric mercuric ion detection using Tween-20-stabilized AuNPs solution in 96-well plates

This paper reports the development of a sensitive, high-throughput colorimetric method for the detection of trace mercuric ions (Hg²⁺). The method is based on the binding of the analyte to gold nanoparticles (AuNPs) modified with Tween-20. Tween-20 was used as a nonionic stabilizer to allow a good dispersion of AuNPs in solution. When mercuric ions were added to the solution, they replaced the Tween-20 stabilizer on the surface of the AuNPs due to their stronger binding affinity. This caused the NPs to aggregate and the color of the solution to change from red to blue. The quantitative analysis of Hg²⁺ was achieved by plotting the Red Green Blue (RGB) values of the scanned images of the analyte samples in the AuNP solution against concentrations of Hg²⁺. Since the reaction was carried out in 96-well plates, ninety-six samples were analyzed simultaneously, reducing the cost and time of analysis. The experimental parameters optimized were the concentrations of Tween-20 and NaCl, the reactants ratio, and the incubation time. Under the optimum conditions, the calibration plot of the assay was linear over an Hg²⁺ concentration range of 0.10-2.00 mg L^-1, and the detection limit was 0.050 mg L^-1 (S/N  =  3). The selectivity of the technique was high with no significant colorimetric responses to the presence of 100-fold excesses of other metal ions. Quantification was validated with Hg²⁺ standard solutions and spiked tap and waste water samples, and the accuracy of the technique was confirmed. The developed technique is simple and cost effective because it requires no complicated instruments, yet the results demonstrate it to be a very powerful technique with the potential to be developed for on-site mercury detection.

Applications of vitamin B6 cofactor pyridoxal 5'-phosphate and pyridoxal 5'-phosphate crowned gold nanoparticles for optical sensing of metal ions

Vitamin B6 cofactor pyridoxal 5'-phosphate (PLP) and PLP crowned gold nanoparticles (PLP-AuNPs) was applied for the optical chemosensing of metal ions in aqueous medium. PLP showed a visually detectable colour change from colourless to yellow and 'turn-off' fluorescence in the presence of Fe³⁺. The fluorescence intensity of PLP at 433nm was also blue-shifted and enhanced at 395nm upon addition of Al³⁺. When the PLP was functionalized over AuNPs surface, the wine red colour of PLP-AuNPs was turned to purplish-blue and the SPR band at ~525nm was red-shifted upon addition of Al³⁺, Cd²⁺ and Pb²⁺ due to the complexation-induced aggregation of nanoparticles. The developed sensing systems exhibited good selectivity and specificity for the detected analytes (Fe³⁺, Al³⁺, Cd²⁺ and Pb²⁺).

Instrument-free quantitative gold nanoparticle-based liquid-phase colorimetric assays for use in resource-poor environments

This work describes a new class of gold nanoparticle-based liquid-phase colorimetric assay (GNP-LPCA) termed as two dimensional (2D) GNP-LPCA that enables quantitative detection of model analytes with naked eye.

Oxidase-like mimic of Ag@Ag3PO4 microcubes as a smart probe for ultrasensitive and selective Hg(2+) detection

An oxidase-like mimic system based on facilely synthesized Ag@Ag3PO4 microcubes (Ag@Ag3PO4MCs) was designed and utilized to detect mercury ions with high selectivity and ultrasensitivity. Ag@Ag3PO4MCs with an average size of ca. 1.6 μm were synthesized by the reaction of [Ag(NH3)2](+) complex and Na2HPO4 and subsequent photoreduction under ultraviolet light. The as-prepared Ag@Ag3PO4MCs can effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and o-phenylenediamine (OPD) in the presence of dissolved oxygen in slightly acidic solution, exhibiting oxidase-like activities rather than peroxidase-like activity. Interestingly, the introduction of Ag nanoparticles (AgNPs) on the surfaces of Ag3PO4MCs can dramatically enhance the oxidase-like activities due to a synergistic effect between AgNPs and Ag3PO4MCs, as evidenced by the faster oxidation speed of TMB and OPD than that of native Ag3PO4MCs in the presence of dissolved oxygen. The enzyme kinetics can be well-explained by the Michaelis-Menten equation. As "poisoning" inhibitor, Hg(2+) ions can inhibit the enzyme reaction catalyzed by Ag3PO4MCs or Ag@Ag3PO4MCs. On the basis of this effect, a colorimetric Hg(2+) sensor was developed by the enzyme inhibition reaction of Ag3PO4MCs or Ag@Ag3PO4MCs. The excellent specific interaction of Hg-Ag or Hg(2+)-Ag(+) provides high selectivity for Hg(2+) over interfering metal ions. Meanwhile, the sensitivity of this sensor to Hg(2+) is extremely excellent with a limit of detection as low as 0.253 nM for Ag@Ag3PO4MCs. Considering the advantages of low detection limit, low cost, facile preparation, and visualization, the colorimetric Ag@Ag3PO4MCs sensor shows high promise for the testing of Hg(2+) in water samples.

Highly selective and portable chemosensor for mercury determination in water samples using curcumin nanoparticles in a paper based analytical device

Curcumin nanoparticle (CURNs) are employed in a paper based analytical device (PADs) for monitoring Hg²⁺ concentration.

Gold nanoparticle synthesis coupled to fluorescence turn-on for sensitive detection of formaldehyde using formaldehyde dehydrogenase

Ultrasensitive detection of formaldehyde by coupling enzyme activity with GNP synthesis.

Colorimetric detection of Hg2+ based on inhibiting the peroxidase-like activity of DNA–Ag/Pt nanoclusters

This paper reported that the peroxidase-like activity of DNA–Ag/Pt nanoclusters (NCs) can be inhibited selectively by Hg²⁺.

Layered MnO₂ nanosheet as a label-free nanoplatform for rapid detection of mercury(II)

A layered MnO2 nanosheet was established as a label-free fluorescent sensing platform for a rapid, sensitive and low-cost detection of mercury(II) ion in aqueous solution based on the target-induced conformational change of mercury-specific oligonucleotide (MSO) and the interactions between the fluorogenic MSO probe and MnO2 nanosheet.

Recent Developments in the Speciation and Determination of Mercury Using Various Analytical Techniques

This paper reviews the speciation and determination of mercury by various analytical techniques such as atomic absorption spectrometry, voltammetry, inductively coupled plasma techniques, spectrophotometry, spectrofluorometry, high performance liquid chromatography, and gas chromatography. Approximately 126 research papers on the speciation and determination of mercury by various analytical techniques published in international journals since 2013 are reviewed.

Highly sensitive SERS sensor for mercury ions based on the catalytic reaction of mercury ion decorated Ag nanoparticles

Schematic diagram of the SERS sensing mechanism for mercury ions by a catalytic oxidation reaction.

Gold nanoparticle-based fluorescent “turn-on” sensing system for the selective detection of mercury ions in aqueous solution

A simple and straightforward fluorometric assay using dye-adsorbed gold nanoparticles (AuNPs) was used in the highly selective and sensitive detection of mercury ions in aqueous buffer solution.

Simple fluorescence-based detection of Cr(iii) and Cr(vi) using unmodified gold nanoparticles

A fluorescence-based method for the determination of both Cr(iii) and Cr(vi) using unmodified gold nanoparticles.

Self-assembly of magnetically recoverable ratiometric Cu2+ fluorescent sensor and adsorbent

A magnetically recyclable ratiometric Cu²⁺ fluorescent sensor based on mesoporous silica nanoparticles was fabricated through a novel one-pot self-assembly method.