Study on photocatalytic degradation and antibacterial properties of conjugated microporous polymers/TiO2 composite membranes

Conjugated microporous polymers (CMPs) are widely used in the field of photocatalysis due to their unique conjugated structures and various synthesis methods. Herein, we report the design and synthesis of conjugated microporous polymers hollow spheres (CMPs-HS) superhydrophilic modified by acetylcysteine (CMPs-HS-S) and compounded with the inorganic semiconductor material titanium dioxide (CMPs-HS-S/TiO2) for efficient photocatalytic degradation. To facilitate recycling, the composite membrane material was prepared by combining the materials mentioned above with PVDF membrane. The composite membrane materials had good hydrophilic and photocatalytic properties. Under visible light, the degradation rate of tetracycline (TC) (10 mg/L 180 min) reached 90 %, and the bactericidal rates for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 89 % and 99.99 %, respectively. The efficient photocatalytic performance of the composite membranes could be attributed to the hollow sphere structure of CMPs and the role of TiO2 as a photogenic electron transfer platform. Additionally, the hydrophilicity of the membrane also helped to accelerate the occurrence of photocatalytic reactions. After electron paramagnetic resonance (EPR) detection, h+, 1O2 and O2- were proved to be important reactive substances, which played a major role in degradation. These studies reflect the versatility of CMPs-based photocatalysts and provide a new idea for the future development of CMPs-based photocatalysts.

A Sacrificial Linker in Biodegradable Polyesters for Accelerated Photoinduced Degradation, Monitored by Continuous Atline SEC Analysis

Polymeric materials that undergo photoinduced degradation have wide application in fields such as controlled release. Most methods for photoinduced degradation rely on the UV or near-UV region of the electromagnetic spectrum; however, use of the deeply penetrating and benign wavelengths of visible light offers a multitude of advantages. Here we report a lactone monomer for ring-opening copolymerizations to introduce a sacrificial linker into a polymer backbone which can be cleaved by reactive oxygen species which are produced by a photocatalyst under visible light irradiation. We find that copolymers of this material readily degrade under visible light. We followed polymer degradation using a continuous flow size exclusion chromatography system, the components of which are described herein.

Hairy Conjugated Microporous Polymer Nanoparticles Facilitate Heterogeneous Photoredox Catalysis with Solvent-Specific Dispersibility

Substrate accessibility is a key limiting factor for the efficiency of heterogeneous photoredox catalysis. Recently, a high photoactive surface area of conjugated microporous polymer nanoparticles (CMP NPs) has made them promising candidates for overcoming the mass transfer limitation to achieve high photocatalytic efficiency. However, this potential has not been realized due to limited dispersibility of CMP NPs in many solvents, particularly in water. Here, we report a polymer grafting strategy that furnishes versatile hairy CMP NPs with enhanced solvent-specific dispersibility. The method associates hundreds of solvent-miscible repeating units with one chain end of the photocatalyst surface, allowing minimal modification to the CMP network that preserves its photocatalytic activity. Therefore, the enhanced dispersibility of hairy CMP NPs in organic solvents or aqueous solutions affords high efficiency in various photocatalytic organic transformations.

Photosensitized co-generation of nitric oxide and singlet oxygen Enhanced toxicity against ovarian cancer cells

Near micromolar concentrations of nitric oxide (NO) induce tumor cells death. However, an appropriate NO load has to be delivered selectively to the tumor site in order to avoid NO loss and secondary NO-induced effects. The encapsulation of millimolar concentrations of a NO source and an appropriate trigger of NO release within phospatidylcholine-based liposomes should provide an efficient tool for the selective release of the needed NO payload. In this work we report the photosensitized generation of singlet oxygen and NO from folate-targeted PEGylated liposomes, containing AlPcS4 as the sensitizer and S-nitrosoglutathione (GSNO), in millimolar amounts, as the NO source. Amounts of singlet oxygen detected outside the liposome when using PEGylated liposomes are near 200 % larger when GSNO is present inside the liposomes as compared to its absence. These liposomes, conjugated to folate, were found to enhance the photosensitized cytotoxicity to A2780CP20 ovarian cancer cells as compared to liposomes containing the sensitizer but no GSNO (30 % as compared to 70 % cell viability) under the conditions of this work. Fluorescense of AlPcS4 was observed inside cells incubated with folate-conjugated liposomes but not with liposomes without folate. The photosensitized activity enhancement by GSNO increased when light fluence or liposome concentration were increased. The majority of ovarian cancer patients are initially diagnosed with disseminated intra-abdominal disease (stages III-IV) and have a 5-year survival of less than 20%. This work suggests a novel ovarian cancer nodules treatment via the use of tumor-targeted liposome nanoparticles with the capability of generating simultaneously reactive oxygen and nitrogen species upon illumination with near-infrared light.

Porous organic polymers for light-driven organic transformations

As a new generation of porous materials, porous organic polymers (POPs), have recently emerged as a powerful platform of heterogeneous photocatalysis. POPs are constructed using extensive organic synthesis methodologies, with various functional organic units being connected via high-energy covalent bonds. This review systematically presents the recent advances in POPs for visible-light driven organic transformations. Herein, we firstly summarize the common construction strategies for POP-based photocatalysts based on two major approaches: pre-design and post-modification; secondly, we categorize and summarize the synthesis methods and organic reaction types for constructing various types of POPs. We then classify and introduce the specific reactions of current light-driven POP-mediated organic transformations. Finally, we outline the current state of development and the problems faced in light-driven organic transformations by POPs, and we present some perspectives to motivate the reader to explore solutions to these problems and confront the present challenges in the development process.

4,7-Diarylbenzo[c][1,2,5]thiadiazoles as fluorophores and visible light organophotocatalysts

A library of 26 electron donor-acceptor organophotocatalysts based on the benzo[c][1,2,5]thiadiazole (BTZ) group has been developed. These visible light organophotocatalysts were then used in a Minisci-type alkylation of heteroarenes under both batch and continuous flow conditions.

8,8'-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(quinolin-4(1H)-one): a twisted photosensitizer with AIE properties

A new benzothiadiazole (BTZ) luminogen is prepared via the Suzuki-Miyaura Pd-catalysed C-C cross-coupling of 8-iodoquinolin-4(1H)-one and a BTZ bispinacol boronic ester. The rapid reaction (5 min) affords the air-, thermo-, and photostable product in 97% yield as a yellow precipitate that can be isolated by filtration. The luminogen exhibits aggregated-induced emission (AIE) properties, which are attributed to its photoactive BTZ core and nonplanar geometry. It also behaves as a molecular heterogeneous photosensitizer for the production of singlet oxygen under continuous flow conditions.

Rational design of bifunctional conjugated microporous polymers

Conjugated microporous polymers (CMPs) are an emerging class of porous organic polymers that combine π-conjugated skeletons with permanent micropores. Since their first report in 2007, the enormous exploration of linkage types, building units, and synthetic methods for CMPs have facilitated their potential applications in various areas, from gas separations to energy storage. Owning to their unique construction, CMPs offer the opportunity for the precise design of conjugated skeletons and pore environment engineering, which allow the construction of functional porous materials at the molecular level. The capability to chemically alter CMPs to targeted applications allows for the fine adaptation of functionalities for the ever-changing environments and necessities. Bifunctional CMPs are a branch of functionalized CMPs that have caught the interest of researchers because of their inherent synergistic systems that can expand their applications and optimize their performance. This review discusses the rational design and synthesis of bifunctional CMPs and summarizes their advanced applications. To conclude, our own perspective on the research prospects of these types of materials is outlined.

N,N'-bicarbazole-benzothiadiazole-based conjugated porous organic polymer for reactive oxygen species generation in live cells

A π-conjugated porous organic polymer (BCzBz) was fabricated employing N,N'-bicarbazole and benzothiadiazole as molecular building units exhibiting broad visible light absorption. The photostable, water-dispersible, and cytocompatible BCzBz was demonstrated as an efficient probe for intracellular reactive oxygen species generation under photoirradiation.

Room-Temperature Synthesis of a Hollow Microporous Organic Polymer Bearing Activated Alkyne IR Probes for Nonradical Thiol-yne Click-Based Post-Functionalization

This work shows that hollow microporous organic polymer (H-MOP-A) with activated internal alkynes as IR probes can be prepared by template synthesis based on acyl Sonogashira-Hagihara coupling at room temperature. The H-MOP-A is a versatile platform in the main chain PSM based on nonradical thiol-yne click reaction. Moreover, an IR peak of internal alkynes in the H-MOP-A is very intense and could be utilized in the monitoring of thiol-yne click-based main chain PSM. The functionalized H-MOP-A with carboxylic acids (H-MOP-CA) showed efficient adsorption toward Ag⁺ ions. The resultant H-MOP-CA-Ag showed excellent performance in the CO₂ fixation to α-alkylidene cyclic compounds.

New Approach in the Application of Conjugated Polymers: The Light-Activated Source of Versatile Singlet Oxygen Molecule

For many years, the research on conjugated polymers (CPs) has been mainly focused on their application in organic electronics. Recent works, however, show that due to the unique optical and photophysical properties of CPs, such as high absorption in UV–Vis or even near-infrared (NIR) region and efficient intra-/intermolecular energy transfer, which can be relatively easily optimized, CPs can be considered as an effective light-activated source of versatile and highly reactive singlet oxygen for medical or catalytic use. The aim of this short review is to present the novel possibilities that lie dormant in those exceptional polymers with the extended system of π-conjugated bonds.

Beyond C3N4 π-conjugated metal-free polymeric semiconductors for photocatalytic chemical transformations

Photocatalysis with stable, efficient and inexpensive metal-free catalysts is one of the most promising options for non-polluting energy production. This review article covers the state-of-the-art development of various effective metal-free polymeric photocatalysts with large π-conjugated units for chemical transformations including water splitting, CO2 and N2 reduction, organic synthesis and monomer polymerisation. The article starts with the catalytic mechanisms of metal-free photocatalysts. Then a particular focus is on the rational manipulation of π-conjugation enlargement, charge separation, electronic structures and band structures in the design of metal-free polymeric photocatalysts. Following the design principles, the selection and construction of functional units are discussed, as well as the connecting bonds and dimensions of π-conjugated polymeric photocatalysts. Finally the hot and emerging applications of metal-free polymeric photocatalysts for photocatalytic chemical transformations are summarized. The strategies provide potential avenues to address the challenges of catalyst activity, selectivity and stability in the further development of highly effective metal-free polymeric photocatalysts.

Multifunctional ionic porous frameworks for CO2 conversion and combating microbes

Porous organic frameworks (POFs) with a heteroatom rich ionic backbone have emerged as advanced materials for catalysis, molecular separation, and antimicrobial applications. The loading of metal ions further enhances Lewis acidity, augmenting the activity associated with such frameworks. Metal-loaded ionic POFs, however, often suffer from physicochemical instability, thereby limiting their scope for diverse applications. Herein, we report the fabrication of triaminoguanidinium-based ionic POFs through Schiff base condensation in a cost-effective and scalable manner. The resultant N-rich ionic frameworks facilitate selective CO2 uptake and afford high metal (Zn(ii): 47.2%) loading capacity. Owing to the ionic guanidinium core and ZnO infused mesoporous frameworks, Zn/POFs showed pronounced catalytic activity in the cycloaddition of CO2 and epoxides into cyclic organic carbonates under solvent-free conditions with high catalyst recyclability. The synergistic effect of infused ZnO and cationic triaminoguanidinium frameworks in Zn/POFs led to robust antibacterial (Gram-positive, Staphylococcus aureus and Gram-negative, Escherichia coli) and antiviral activity targeting HIV-1 and VSV-G enveloped lentiviral particles. We thus present triaminoguanidinium-based POFs and Zn/POFs as a new class of multifunctional materials for environmental remediation and biomedical applications.

Recent Advances in Conjugated Polymers for Visible-Light-Driven Water Splitting

With the ambition of solving the challenges of the shortage of fossil fuels and their associated environmental pollution, visible-light-driven splitting of water into hydrogen and oxygen using semiconductor photocatalysts has emerged as a promising technology to provide environmentally friendly energy vectors. Among the current library of developed photocatalysts, organic conjugated polymers present unique advantages of sufficient light-absorption efficiency, excellent stability, tunable electronic properties, and economic applicability. As a class of rising photocatalysts, organic conjugated polymers offer high flexibility in tuning the framework of the backbone and porosity to fulfill the requirements for photocatalytic applications. In the past decade, significant progress has been made in visible-light-driven water splitting employing organic conjugated polymers. The recent development of the structural design principles of organic conjugated polymers (including linear, crosslinked, and supramolecular self-assembled polymers) toward efficient photocatalytic hydrogen evolution, oxygen evolution, and overall water splitting is described, thus providing a comprehensive reference for the field. Finally, current challenges and perspectives are also discussed.

Hydrophilic Conjugated Materials for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution is viewed as a promising green strategy to utilize the inexhaustible solar energy and provide clean hydrogen fuels with zero-emission characteristic. The nature of semiconductor-based photocatalysts is the key point to achieve efficient photocatalytic hydrogen evolution. Conjugated materials have been recently emerging as a novel class of photocatalysts for hydrogen evolution and photocatalytic reactions due to their electronic properties can be well controlled via tailor-made chemical structures. Hydrophilic conjugated materials, a subgroup of conjugated materials, possess multiple advantages for photocatalytic applications, thus spurring remarkable progress on both material realm and photocatalytic applications. This minireview aims to provide a brief review of the recent developments of hydrophilic conjugated polymers/small molecules for photocatalytic applications, and special concern on the rational molecular design and their impact on photocatalytic performance will be reviewed. Perspectives on the hydrophilic conjugated materials and challenges to their applications in the photocatalytic field are also presented.

Covalent triazine framework with efficient photocatalytic activity in aqueous and solid media

Covalent triazine frameworks (CTFs) have been recently employed for visible light-driven photocatalysis due to their unique optical and electronic properties. However, the usually highly hydrophobic nature of CTFs, which originates from their overall aromatic backbone, leads to limitations of CTFs for applications in aqueous media. In this study, we aim to extend the range of the application media of CTFs and design hybrid material of a CTF and mesoporous silica (SBA-15) for efficient photocatalysis in aqueous medium. A thiophene-containing CTF was directly synthesized in mesopores of SBA-15. Due to the high surface area and the added hydrophilic properties by silica, the hybrid material demonstrated excellent adsorption of organic molecules in water. This leads not only to high photocatalytic performance of the hybrid material for the degradation of organic dyes in water, but also for efficient photocatalysis in solvent-free and solid state. Furthermore, the reusability, stability and easy recovery of the hybrid material offers promising metal-free heterogeneous photocatalyst for broader applications in different reaction media.

Conjugated porous polymers: incredibly versatile materials with far-reaching applications

This review discusses conjugated porous polymers and focuses on relating design principles and synthetic methods to key properties and applications such as (photo)catalysis, gas storage, chemical sensing, energy storage and environmental remediation.

Visible-light photooxidation in water by 1O2-generating supramolecular hydrogels

An aqueous photocatalytic system exploits photophysical properties arising from the formation of supramolecular hydrogels, with properties and assembly modulated by the amino acids appended to an organic chromophore.

Organo metal halide perovskites effectively photosensitize the production of singlet oxygen (1Δg)

Using the steady state and time resolved NIR emission and specific chemical trapping techniques, we show for the first time that metal halide perovskite quantum dots can effectively generate singlet oxygen with a quantum yield of up to 0.34, the highest among nano semiconductor/nano metal singlet oxygen photosensitizers. The mechanism is concluded to be due to energy transfer from triplet excitons to molecular oxygen.

Nanoparticulate and microporous solid acid catalysts bearing aliphatic sulfonic acids for biomass conversion

This work introduces new nanocatalytic systems based on microporous organic network (MON) chemistry for fructose conversion to 5-hydroxymethylfurfural (HMF). The efficiency of the catalytic systems could be improved through the size-controlled synthesis of MON materials. Through a predesigned building block approach and a post-synthetic modification, aliphatic sulfonic acid groups were incorporated into nano-sized MON materials to form N-MON-AS. The N-MON-AS showed selective conversion of fructose to HMF in up to 91% yield at 100 °C and good recyclability.

Skeleton Carbonylation of Conjugated Microporous Polymers by Osmium Catalysis for Amine-Rich Functionalization

This work introduces a new efficient method for the postsynthetic modification of conjugated microporous polymers (CMPs). Osmium catalysis of hollow CMP (H-CMP) in the presence of NaClO₃ resulted in the conversion of alkynes in the skeleton of CMPs to dicarbonyl groups to form H-CMP-DC. Through controlling the reaction time, the carbonylation degree of H-CMP could be managed, maintaining hollow morphology. We verified the benefits of carbonyl groups in H-CMP-DC in the removal of Cr(VI) from water. Imination of H-CMP-DC resulted in amine-rich H-CMP (H-CMP-A), which showed enhanced adsorption performance toward Cr(VI) in water with q_max up to 73 mg/g, compared with the H-CMP and H-CMP-DC. The H-CMP-A could be recycled at least five times, maintaining its original adsorption ability.

Folate decorated hollow spheres of microporous organic networks as drug delivery materials

Hollow and microporous organic networks post-modified with folic acids showed promising potential as DOX delivery materials.

Preparation of a Sulfur-Functionalized Microporous Polymer Sponge and In Situ Growth of Silver Nanoparticles: A Compressible Monolithic Catalyst

We report a compressible monolithic catalyst based on a microporous organic polymer (MOP) sponge. The monolithic MOP sponge was synthesized via Sonogashira-Hagihara coupling reaction between 1,4-diiodotetrafluorobenzene and 1,3,5-triethynylbenzene in a cosolvent of toluene and TEA (2:1, v/v) without stirring. The MOP sponge had an intriguing microstructure, where tubular polymer fibers having a diameter of hundreds of nanometers were entangled. It showed hierarchical porosity with a Brunauer-Emmett-Teller (BET) surface area of 512 m² g^-1. The MOP sponge was functionalized with sulfur groups by the thiol-yne reaction. The functionalized MOP sponge exhibited a higher BET surface area than the MOP sponge by 13% due to the increase in the total pore and micropore volumes. A MOP sponge-Ag heterogeneous catalyst (S-MOPS-Ag) was prepared by in situ growth of silver nanoparticles inside the sulfur-functionalized MOP sponge by the reduction of Ag⁺ ions. The catalytic activity of S-MOPS-Ag was investigated for the reduction reaction of 4-nitrophenol in an aqueous condition. When S-MOPS-Ag was compressed and released during the reaction, the rate of the reaction was considerably increased. S-MOPS-Ag was easily removed from the reaction mixture owing to its monolithic character and was reused after washing and drying.

Singlet Oxygen-Engaged Selective Photo-Oxidation over Pt Nanocrystals/Porphyrinic MOF: The Roles of Photothermal Effect and Pt Electronic State

The selectivity control toward aldehyde in the aromatic alcohol oxidation remains a grand challenge using molecular oxygen under mild conditions. In this work, we designed and synthesized Pt/PCN-224(M) composites by integration of Pt nanocrystals and porphyrinic metal-organic frameworks (MOFs), PCN-224(M). The composites exhibit excellent catalytic performance in the photo-oxidation of aromatic alcohols by 1 atm O₂ at ambient temperature, based on a synergetic photothermal effect and singlet oxygen production. Additionally, in opposition to the function of the Schottky junction, injection of hot electrons from plasmonic Pt into PCN-224(M) would lower the electron density of the Pt surface, which thus is tailorable for the optimized catalytic performance via the competition between the Schottky junction and the plasmonic effect by altering the light intensity. To the best of our knowledge, this is not only an unprecedented report on singlet oxygen-engaged selective oxidation of aromatic alcohols to aldehydes but also the first report on photothermal effect of MOFs.