Glucose-triggered release using enzyme-gated mesoporous silica nanoparticles

Optical blood glucose non-invasive detection and its research progress

Blood glucose concentration is an important index for the diagnosis of diabetes, its self-monitoring technology is the method for scientific diabetes management. Currently, the typical household blood glucose meters have achieved great success in diabetes management, but they are discrete detection methods, and involve invasive blood sampling procedures. Optical detection technologies, which use the physical properties of light to detect the glucose concentration in body fluids non-invasively, have shown great potential in non-invasive blood glucose detection. This article summarized and analyzed the basic principles, research status, existing problems, and application prospects of different optical glucose detection technologies. In addition, this article also discusses the problems of optical detection technology in wearable sensors and perspectives on the future of non-invasive blood glucose detection technology to improve blood glucose monitoring in diabetic patients.

Synergistic antimicrobial photodynamic therapy using gated mesoporous silica nanoparticles containing curcumin and polymyxin B

Photodynamic Therapy is a therapy based on combining a non-toxic compound, known as photosensitizer (PS), and irradiation with light of the appropriate wavelength to excite the PS molecule. The photon absorption by the PS leads to reactive oxygen species generation and a subsequent oxidative burst that causes cell damage and death. In this work, we report an antimicrobial nanodevice that uses the activity of curcumin (Cur) as a PS for antimicrobial Photodynamic Therapy (aPDT), based on mesoporous silica nanoparticles in which the action of the classical antibiotic PMB is synergistically combined with the aPDT properties of curcumin to combat bacteria. The synergistic effect of the designed gated device in combination with irradiation with blue LED light (470 nm) is evaluated against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus epidermidis. The results show that the nanodevice exhibits a noteworthy antibacterial activity against these microorganisms, a much more significant effect than free Cur and PMB at equivalent concentrations. Thus, 0.1 µg/mL of MSNs-Cur-PMB eliminates a bacterial concentration of about 105 CFU/mL of E. coli, while 1 µg/mL of MSNs-Cur-PMB is required for P. aeruginosa and S. epidermidis. In addition, antibiofilm activity against the selected bacteria was also tested. We found that 0.1 mg/mL of MSNs-Cur-PMB inhibited 99 % biofilm formation for E. coli, and 1 mg/mL of MSNs-Cur-PMB achieved 90 % and 100 % inhibition of biofilm formation for S. epidermidis and P. aeruginosa, respectively.

Enhancement of photoactivity and cellular uptake of (Bu4N)2[Mo6I8(CH3COO)6] complex by loading on porous MCM-41 support. Photodynamic studies as an anticancer agent

The incorporation by ionic assembly of the hexanuclear molybdenum cluster (Bu₄N)₂[Mo₆I₈(CH₃CO₂)₆] (1) in amino-decorated mesoporous silica nanoparticles MCM-41, has yielded the new molybdenum-based hybrid photosensitizer 1@MCM-41. The new photoactive material presents a high porosity, due to the intrinsic high specific surface area of MCM-41 nanoparticles (989 m² g^-1) which is responsible for the good dispersion of the hexamolybdenum clusters on the nanoparticles surface, as observed by STEM analysis. The hybrid photosensitizer can generate efficiently singlet oxygen, which was demonstrated by using the benchmark photooxygenation reaction of 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABDA) in water. The photodynamic therapy activity has been tested using LED light as an irradiation source (λ_irr ~ 400-700 nm; 15.6 mW/cm²). The results show a good activity of the hybrid photosensitizer against human cervical cancer (HeLa) cells, reducing up to 70 % their viability after 20 min of irradiation, whereas low cytotoxicity is detected in the darkness. The main finding of this research is that the incorporation of molybdenum complexes at porous MCM-41 supports enhances their photoactivity and improves cellular uptake, compared to free clusters.

An enzyme-controlled mesoporous nanomachine for triple-responsive delivery

The construction of a novel enzyme-controlled nanomachine with multiple release mechanisms for on-command delivery is described. This nanodevice was assembled by modifying mesoporous silica nanoparticles with 2-(benzo[d]thiazol-2-yl)phenyl 4-aminobenzoate moieties, and further capped with β-cyclodextrin-modified glucose oxidase neoglycoenzyme. The device released the encapsulated payload in the presence of H₂O₂ and acidic media. The use of glucose as an input chemical signal also triggered cargo release through the enzymatic production of gluconic acid and hydrogen peroxide, and the subsequent disruption of the gating mechanism at the mesoporous surface. The nanodevice was successfully employed for the enzyme-controlled release of doxorubicin in HeLa cancer cells.

Gated Organonanoclays for Large Biomolecules: Controlled Release Triggered by Surfactant Stimulus

The low toxicity and high adsorption capacities of clay minerals make them attractive for controlled delivery applications. However, the number of controlled-release studies in the literature using clay minerals is still scarce. In this work, three different clays from the smectite group (Kunipia F, montmorillonite; Sumecton SA, saponite; and Sumecton SWN, hectorite) were successfully loaded with rhodamine B dye and functionalized with oleic acid as a gatekeeper to produce organonanoclays for active and controlled payload-release. Moreover, hematin and cyanocobalamin have also been encapsulated in hectorite gated clay. These organonanoclays were able to confine the entrapped cargos in an aqueous environment, and effectively release them in the presence of surfactants (as bile salts). A controlled delivery of 49 ± 6 μg hematin/mg solid and 32.7 ± 1.5 μg cyanocobalamin/mg solid was reached. The cargo release profiles of all of the organonanoclays were adjusted to three different release-kinetic models, demonstrating the Korsmeyer-Peppas model with release dependence on (i) the organic-inorganic hybrid system, and (ii) the nature of loaded molecules and their interaction with the support. Furthermore, in vitro cell viability assays were carried out with Caco-2 cells, demonstrating that the organonanoclays are well tolerated by cells at particle concentrations of ca. 50 μg/mL.

Construction of pH/reduction dual responsive MSN-HAgel containing HApt for tumor targeting carriers

In this study, a pH/reduction dual responsive carrier containing 42nt-nucleic acid HApt based on mesoporous silica nanoparticles (MSNs) was designed. Two kinds of low molecular weight oligomeric hyaluronic acid (HA) were used to graft onto MSN for better drug encapsulation. Crosslinked MSN-HA₃₀₀₀gel and MSN-HA₁₁₀₀₀gel were prepared by crosslinking the HA chain through the sulfhydrylization of the carboxyl group on the HA side chain. An appropriate amount of sulfhydryl nucleic acid (HApt-SH) was added during the crosslinking reaction, which realized the targeting ability and apoptosis function to cancer cells overexpressing the HER2 receptor. Crosslinked HA had a good effect on decreasing the side effect of DOX that the drug leakage was less than 20% under a normal body environment. However, it could realize rapid and efficient drug release in a tumor environment. As to the release of HApt, it exhibited a good response to GSH. The cytotoxicity test showed that HApt contained in HAgel had a great targeting effect and significant cytotoxicity to SKBR3 cells. As a whole, this MSN-HAgel enabled the combination of gene therapy and chemotherapy, showing the synergistic effect of “1 + 1 > 2”, providing a novel idea for cancer treatments.

A dual-responsive MSN-based nanocarrier for the combination of gene therapy and chemotherapy in cancer treatments.

Inorganic-Organic Synergy in Nano-hybrids makes a New Class of Drug with Targeted Delivery: Glutamate Functionalization of Iron Nanoparticles for Potential Bone Marrow Delivery and X-ray Dynamic Therapy

Abstract:

The direct delivery of therapeutic molecules is generally inefficient and has several problems. Hence, nano medicines with targeted and controlled delivery applications have been an exciting field of research for the past decade. In this regard, the adjustable properties of inorganic nanoparticles like particle size distribution, ability to change the targeting ligand to have a higher affinity towards the pathologic cell, and controlled delivery properties have made it indispensable for targeted drug delivery applications. Changing the ligand on the surface of the inorganic nanoparticle can direct different therapeutic molecules to different organs like the liver, spleen, kidney, bone, and even brain. However, while the other targeted nano medicines are well-reported targeting of therapeutics to bone marrow cells is sparse in the literature. Hence, the administration of therapeutics for bone-related disorders like bone metastases leads to several problems like severe systemic toxicity and suboptimal efficacy. In this direction, we have shown our successful effort to functionalise a model inorganic nanoparticle (Fe2O3) by glutamate ligand which is reported to have a high affinity towards the NMDA receptors of the bone cells. We have performed spectroscopic studies to characterize the nano-hybrid. We have shown that the cargo or the Fe2O3 nanoparticle possesses the ability to generate photo-induced reactive oxygen species (ROS), thereby leading to a therapeutic opportunity for bone metastases. In addition, the nanoparticle also possesses the ability to generate enhanced ROS on X-ray irradiation, which may provide a new strategy for bone metastases and cancer therapy. Also, this paper reviews the advancement in the drug delivery applications of inorganic nanoparticles and highlights the crosstalk between the inorganic nanoparticles with the conjugated targeting ligand for efficient delivery applications.

Facile Cellulase Immobilisation on Bioinspired Silica

Cellulases are enzymes with great potential for converting biomass to biofuels for sustainable energy. However, their commercial use is limited by their costs and low reusability. Therefore, the scientific and industrial sectors are focusing on finding better strategies to reuse enzymes and improve their performance. In this work, cellulase from Aspergillus niger was immobilised through in situ entrapment and adsorption on bio-inspired silica (BIS) supports. To the best of our knowledge, this green effect strategy has never been applied for cellulase into BIS. In situ entrapment was performed during support synthesis, applying a one-pot approach at mild conditions (room temperature, pH 7, and water solvent), while adsorption was performed after support formation. The loading efficiency was investigated on different immobilisation systems by Bradford assay and FTIR. Bovine serum albumin (BSA) was chosen as a control to optimize cellulase loading. The residual activity of cellulase was analysed by the dinitro salicylic acid (DNS) method. Activity of 90% was observed for the entrapped enzyme, while activity of ~55% was observed for the adsorbed enzyme. Moreover, the supported enzyme systems were recycled five times to evaluate their reuse potential. The thermal and pH stability tests suggested that both entrapment and adsorption strategies can increase enzyme activity. The results highlight that the entrapment in BIS is a potentially useful strategy to easily immobilise enzymes, while preserving their stability and recycle potential.

Hydrogen Peroxide-Triggered Conversion of Boronic Acid-Appended Insulin into Insulin and Its Application as a Glucose-Responsive Insulin Formulation

p-Boronophenylmethoxycarbonyl (BPmoc) is a protecting group for amines that is removable by treatment with hydrogen peroxide (H₂O₂). We prepared BPmoc-modified insulin (BPmoc-Ins) and subcutaneously injected the formulation into diabetic rats. The results demonstrated that BPmoc effectively sealed the blood glucose (Glc)-lowering effects of Ins. Conversely, coinjection of BPmoc-Ins and Glc oxidase (GOx) resulted in reduced blood Glc levels, indicating that Ins was generated from BPmoc-Ins through the following reactions: oxidation of endogenous Glc by GOx; production of H₂O₂ accompanied by Glc oxidation; removal of BPmoc residues by H₂O₂. These results show the potential of BPmoc-Ins for a Glc-responsive Ins release system.

Aerogels as promising materials for antibacterial applications: a mini-review

The increasing cases of bacterial infections originating from resistant bacteria are a serious problem globally and many approaches have been developed for different purposes to treat bacterial infections. Aerogels are a novel class of smart porous materials composed of three-dimensional networks. Recently, aerogels with the advantages of ultra-low density, high porosity, tunable particle and pore sizes, and biocompatibility have been regarded as promising carriers for the design of delivery systems. Recently, aerogels have also been provided with antibacterial activity through loading of antibacterial agents, incorporation of metal/metal oxides and via surface functionalization and coating with various functional groups. In this mini-review, the synthesis of aerogels from both conventional and low-cost precursors is reported and examples of aerogels displaying antibacterial properties are summarized. As a result, it is clear that the encouraging antibacterial performance of aerogels promotes their use in many antibacterial applications, especially in the food industry, pharmaceutics and medicine.

Cyclodextrin polymer-valved MoS2-embedded mesoporous silica nanopesticides toward hierarchical targets via multidimensional stimuli of biological and natural environments

Targeted delivery of pesticides towards pests and pathogens can significantly improve the bioavailability and efficacy of pesticides and minimize the impact on the environment. Cyclodextrin polymer (CDP)-valved, benzimidazole functionalized, MoS₂-embedded mesoporous silica (MoS₂@MSN@CDP) nanopesticides were constructed toward hierarchical biological targets of pests, pathogens, and foliage. The splash and bounce of the aqueous droplets containing MoS₂@MSN@CDP nanoparticles in the presence of Aersosol OT on superhydrophobic surfaces were well inhibited available for excellent wetting to prevent pesticides from losing to the environment. The multivalent supramolecular nanovalves between CDP and the functionalized benzimidazole moieties could be activated for the controlled release of pesticides in the cases of low pH and α-amylase. It is the first time to report the foliage-triggered controlled release of pesticides, owing to the competitive binding of epicuticular wax components to CDP. Furthermore, thermogenic MoS₂ cores triggered the controlled release of pesticides under irradiation of near infrared light. The fungicidal efficacies of the stimuli-responsive nanopesticides against pathogenic fungi Rhizoctonia solani and Fusarium graminearum were demonstrated. It is clear that the smart nanopesticides could realize the controlled release of pesticides toward hierarchical biological targets for enhanced pesticide bioavailability and efficacy via the multidimensional stimuli of pH, α-amylase, epicuticular waxes, and sunlight.

Mesoporous silica nanoparticles for pulmonary drug delivery

Over the last years, respiratory diseases represent a clinical concern, being included among the leading causes of death in the world due to the lack of effective lung therapies, mainly ascribed to the pulmonary barriers affecting the delivery of drugs to the lungs. In this way, nanomedicine has arisen as a promising approach to overcome the limitations of current therapies for pulmonary diseases. The use of nanoparticles allows enhancing drug bioavailability at the target site while minimizing undesired side effects. Despite different approaches have been developed for pulmonary delivery of drugs, including the use of polymers, lipid-based nanoparticles, and inorganic nanoparticles, more efforts are required to achieve effective pulmonary drug delivery. This review provides an overview of the clinical challenges in main lung diseases, as well as highlighted the role of nanomedicine in achieving efficient pulmonary drug delivery. Drug delivery into the lungs is a complex process limited by the anatomical, physiological and immunological barriers of the respiratory system. We discuss how nanomedicine can be useful to overcome these pulmonary barriers and give insights for the rational design of future nanoparticles for enhancing lung treatments. We also attempt herein to display more in detail the potential of mesoporous silica nanoparticles (MSNs) as promising nanocarrier for pulmonary drug delivery by providing a comprehensive overview of their application in lung delivery to date while discussing the use of these particles for the treatment of respiratory diseases.

Gene-Directed Enzyme Prodrug Therapy by Dendrimer-Like Mesoporous Silica Nanoparticles against Tumor Cells

We report herein a gene-directed enzyme prodrug therapy (GDEPT) system using gated mesoporous silica nanoparticles (MSNs) in an attempt to combine the reduction of side effects characteristic of GDEPT with improved pharmacokinetics promoted by gated MSNs. The system consists of the transfection of cancer cells with a plasmid controlled by the cytomegalovirus promoter, which promotes β-galactosidase (β-gal) expression from the bacterial gene lacZ (CMV-lacZ). Moreover, dendrimer-like mesoporous silica nanoparticles (DMSNs) are loaded with the prodrug doxorubicin modified with a galactose unit through a self-immolative group (DOXO-Gal) and modified with a disulfide-containing polyethyleneglycol gatekeeper. Once in tumor cells, the reducing environment induces disulfide bond rupture in the gatekeeper with the subsequent DOXO-Gal delivery, which is enzymatically converted by β-gal into the cytotoxic doxorubicin drug, causing cell death. The combined treatment of the pair enzyme/DMSNs-prodrug are more effective in killing cells than the free prodrug DOXO-Gal alone in cells transfected with β-gal.

A new 8-oxo-7,8-2'deoxyguanosine nanoporous anodic alumina aptasensor for colorectal cancer diagnosis in blood and urine

Many important human diseases, and especially cancer, have been related to the overproduction of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dG). This molecule is a product of oxidative stress processes over nucleophilic bases in DNA. In this work, an aptasensor for the rapid, selective and accurate detection of this oncomarker is presented. The aptasensor consists of a nanoporous anodic alumina material loaded with a dye and is functionalized with an aptamer-based "molecular gate". In the presence of target 8-oxo-dG, the capping aptamer displaces from the surface due to the high affinity of the analyte with the capping aptamer, thus inducing delivery of the preloaded fluorescent dye. In contrast, in the absence of 8-oxo-dG, a poor payload delivery is accomplished. This aptamer-based nanodevice has great sensitivity for 8-oxo-dG, resulting in a LOD of 1 nM and a detection time of ca. 60 min. Moreover, the aptasensor is able to accurately detect 8-oxo-dG in unmodified urine and serum without pre-concentration treatments. This diagnostic tool is validated in a set of 38 urine and serum samples from patients diagnosed of colorectal cancer and control patients. These samples are also analyzed using a standardized and specific ELISA kit. The aptasensor displays excellent sensitivity (95.83/100%) and specificity (80/100%) for 8-oxo-dG detection in serum and urine samples, respectively. Our results may serve as a basis for the development of generalized fluorogenic diagnostic platforms for the easy diagnosis of cancer in biofluids as well as for monitoring therapeutic treatments and detection of relapses without the use of expensive equipment or trained personnel.

Stimuli-responsive mesoporous silica nanoparticles: A custom-tailored next generation approach in cargo delivery

The pre-mature release of therapeutic cargos in the bloodstream or off-target sites is a major hurdle in drug delivery. However, stimuli-specific drug release responses are capable of providing greater control over the cargo release. Herein, various types of nanocarriers have been employed for such applications. Among various types of nanoparticles, mesoporous silica nanoparticles (MSNPs) have several attractive characteristics, such as high loading capacity, biocompatibility, small size, porous structure, high surface area, tunable pore size and ease of functionalization of the external and internal surfaces, which facilitates the entrapment and development of stimuli-dependent release of drugs. MSNPs could be modified with such stimuli-responsive entities like nucleic acid, peptides, polymers, organic molecules, etc., to prevent pre-mature cargo release, improving the therapeutic outcome. This controlled drug release system could be modulated to function upon extracellular or intracellular specific stimuli, including pH, enzyme, glucose, glutathione, light, temperature, etc., and thus provide minimal side effects at non-target sites. This system has great potential applications for the targeted delivery of therapeutics to treat clinically challenging diseases like cancer. This review summarizes the synthesis and design of stimuli-responsive release strategies of MSNP-based drug delivery systems along with investigations in biomedical applications.

Towards the Enhancement of Essential Oil Components' Antimicrobial Activity Using New Zein Protein-Gated Mesoporous Silica Microdevices

The development of new food preservatives is essential to prevent foodborne outbreaks or food spoilage due to microbial growth, enzymatic activity or oxidation. Furthermore, new compounds that substitute the commonly used synthetic food preservatives are needed to stifle the rising problem of microbial resistance. In this scenario, we report herein, as far as we know, for the first time the use of the zein protein as a gating moiety and its application for the controlled release of essential oil components (EOCs). The design of microdevices consist of mesoporous silica particles loaded with essential oils components (thymol, carvacrol and cinnamaldehyde) and functionalized with the zein (prolamin) protein found in corn as a molecular gate. The zein protein grafted on the synthesized microdevices is degraded by the proteolytic action of bacterial enzymatic secretions with the consequent release of the loaded essential oil components efficiently inhibiting bacterial growth. The results allow us to conclude that the new microdevice presented here loaded with the essential oil component cinnamaldehyde improved the antimicrobial properties of the free compound by decreasing volatility and increasing local concentration.

Can nanoparticles and nano‒protein interactions bring a bright future for insulin delivery?

Insulin therapy plays an essential role in the treatment of diabetes mellitus. However, frequent injections required to effectively control the glycemic levels lead to substantial inconvenience and low patient compliance. In order to improve insulin delivery, many efforts have been made, such as developing the nanoparticles (NPs)-based release systems and oral insulin. Although some improvements have been achieved, the ultimate results are still unsatisfying and none of insulin-loaded NPs systems have been approved for clinical use so far. Recently, nano‒protein interactions and protein corona formation have drawn much attention due to their negative influence on the in vivo fate of NPs systems. As the other side of a coin, such interactions can also be used for constructing advanced drug delivery systems. Herein, we aim to provide an insight into the advance and flaws of various NPs-based insulin delivery systems. Particularly, an interesting discussion on nano‒protein interactions and its potentials for developing novel insulin delivery systems is initiated.

•

Insulin therapy plays essential roles in treating diabetes.

•

Optimizing insulin delivery enhances insulin therapy.

•

Nanoparticles are promising systems for delivery of insulin.

•

Nano-protein interactions influence the delivery of nanoparticles.

•

Nano-protein interactions can be used for advanced delivery of insulin.

Triplex Hybridization-Based Nanosystem for the Rapid Screening of Pneumocystis Pneumonia in Clinical Samples

Pneumocystis pneumonia (PcP) is a disease produced by the opportunistic infection of the fungus Pneumocystis jirovecii. As delayed or unsuitable treatments increase the risk of mortality, the development of rapid and accurate diagnostic tools for PcP are of great importance. Unfortunately, current standard methods present severe limitations and are far from adequate. In this work, a time-competitive, sensitive and selective biosensor based on DNA-gated nanomaterials for the identification of P. jirovecii is presented. The biosensor consists of a nanoporous anodic alumina (NAA) scaffold which pores are filled with a dye reporter and capped with specific DNA oligonucleotides. In the presence of P. jirovecii genomic DNA, the gated biosensor is open, and the cargo is delivered to the solution where it is monitored through fluorescence spectroscopy. The use of capping oligonucleotides able to form duplex or triplex with P. jirovecii DNA is studied. The final diagnostic tool shows a limit of detection (LOD) of 1 nM of target complementary DNA and does not require previous amplification steps. The method was applied to identify DNA from P. jirovecii in unmodified bronchoalveolar lavage, nasopharyngeal aspirates, and sputum samples in 60 min. This is a promising alternative method for the routinely diagnosis of Pneumocystis pneumonia.

MUC1 Aptamer-Capped Mesoporous Silica Nanoparticles for Navitoclax Resistance Overcoming in Triple-Negative Breast Cancer

Triple-negative breast cancer (TNBC) is the most aggressive breast cancer subtype. In the last years, navitoclax has emerged as a possible treatment for TNBC. Nevertheless, rapid navitoclax resistance onset has been observed thorough Mcl-1 overexpression. As a strategy to overcome Mcl-1-mediated resistance, herein we present a controlled drug co-delivery system based on mesoporous silica nanoparticles (MSNs) targeted to TNBC cells. The nanocarrier is loaded with navitoclax and the Mcl-1 inhibitor S63845 and capped with a MUC1-targeting aptamer (apMUC1-MSNs(Nav/S63845)). The apMUC1-capped nanoparticles effectively target TNBC cell lines and successfully induce apoptosis, overcoming navitoclax resistance. Moreover, navitoclax encapsulation protects platelets against apoptosis. These results point apMUC1-gated MSNs as suitable BH3 mimetics nanocarriers in the targeted treatment of MUC1-expressing TNBC.

Silica Mesoporous Structures: Effective Nanocarriers in Drug Delivery and Nanocatalysts

The application of silica mesoporous structures in drug delivery and the removal of pollutants and organic compounds through catalytic reactions is increasing due to their unique characteristics, including high loading capacities, tunable pores, large surface areas, sustainability, and so on. This review focuses on very well-studied class of different construction mesoporous silica nano(particles), such as MCM-41, SBA-15, and SBA-16. We discuss the essential parameters involved in the synthesis of these materials with providing a diverse set of examples. In addition, the recent advances in silica mesoporous structures for drug delivery and catalytic applications are presented to fill the existing gap in the literature with providing some promising examples on this topic for the scientists in both industry and academia active in the field. Regarding the catalytic applications, mesoporous silica particles have shown some promises to remove the organic pollutants and to synthesize final products with high yields due to the ease with which their surfaces can be modified with various ligands to create appropriate interactions with target molecules. In the drug delivery process, as nanocarriers, they have also shown very good performance thanks to the easy surface functionalization but also adjustability of their porosities to providing in-vivo and in-vitro cargo delivery at the target site with appropriate rate.

A Sensitive Nanosensor for the In Situ Detection of the Cannibal Drug

A bio-inspired nanodevice for the selective and sensitive fluorogenic detection of 3,4-methylenedioxypyrovalerone (MDPV), usually known as Cannibal drug, is reported. The sensing nanodevice is based on mesoporous silica nanoparticles (MSNs), loaded with a fluorescent reporter (rhodamine B), and functionalized on their external surface with a dopamine derivative (3), which specifically interacts with the recombinant human dopamine transporter (DAT), capping the pores. In the presence of MDPV, DAT detaches from the MSNs consequently, causing rhodamine B release and allowing drug detection. The nanosensor shows a detection limit of 5.2 μM, and it is able to detect the MDPV drug both in saliva and blood plasma samples.

Janus nanocarrier powered by bi-enzymatic cascade system for smart delivery

We report herein the assembly of an integrated nanodevice with bi-enzymatic cascade control for on-command cargo release. This nanocarrier is based on Au-mesoporous silica Janus nanoparticles capped at the mesoporous face with benzimidazole/β-cyclodextrin-glucose oxidase pH-sensitive gate-like ensembles and functionalized with invertase on the gold face. The rationale for this delivery mechanism is based on the invertase-mediated hydrolysis of sucrose yielding glucose, which is further transformed into gluconic acid by glucose oxidase causing the disruption of the pH-sensitive supramolecular gates at the Janus nanoparticles. This enzyme-powered device was successfully employed in the autonomous and on-demand delivery of doxorubicin in HeLa cancer cells.

Polymer-Covalent Organic Frameworks Composites for Glucose and pH Dual-Responsive Insulin Delivery in Mice

Glucose and pH dual-responsive insulin delivery carriers that have been validated in animal models, remain elusive and much desired. Herein, a new class of covalent organic frameworks (COFs)-based insulin delivery nanocarriers is developed by encapsulating insulin (Ins) and glucose oxidase (GOx) into COFs (COF-1 and COF-5) via both Brønsted and Lewis type (N:→B) complexations. Subsequently, polyethylene glycolated fluorescein isothiocyanate (FITC-PEG) is incorporated into the COFs via the exchange reactions between the disulfide in insulin chains and the thiol in FITC-PEG to afford a robust nano-assembly (FITC-PEG-COF@Ins-GOx). In vitro, the nanocarriers rely on the boroxine-linked COFs' response to pH and glucose dual-stimulation and rendered sustainable insulin delivery. In vivo, the polymer-COFs composite displays excellent long-acting anti-diabetic effects on type 1 diabetic mice within 72 h without side effects after one injection. More intriguingly, the nanocomposites also show great promise for the efficient delivery of native proteins with high generality. To the authors' knowledge, this represents the first study pertaining to a facile methodology to prepare COF-based insulin-delivery nanocarriers for in vitro and in vivo therapeutic applications.

Glucose-Responsive Insulin and Delivery Systems: Innovation and Translation

Type 1 and advanced type 2 diabetes treatment involves daily injections or continuous infusion of exogenous insulin aimed at regulating blood glucose levels in the normoglycemic range. However, current options for insulin therapy are limited by the risk of hypoglycemia and are associated with suboptimal glycemic control outcomes. Therefore, a range of glucose-responsive components that can undergo changes in conformation or show alterations in intermolecular binding capability in response to glucose stimulation has been studied for ultimate integration into closed-loop insulin delivery or "smart insulin" systems. Here, an overview of the evolution and recent progress in the development of molecular approaches for glucose-responsive insulin delivery systems, a rapidly growing subfield of precision medicine, is presented. Three central glucose-responsive moieties, including glucose oxidase, phenylboronic acid, and glucose-binding molecules are examined in detail. Future opportunities and challenges regarding translation are also discussed.

Nanosensor for Sensitive Detection of the New Psychedelic Drug 25I-NBOMe

This work reports the synthesis, characterization, and sensing behavior of a hybrid nanodevice for the detection of the potent abuse drug 25I-NBOMe. The system is based on mesoporous silica nanoparticles, loaded with a fluorescent dye, functionalized with a serotonin derivative and capped with the 5-HT_2A receptor antibody. In the presence of 25I-NBOMe the capping antibody is displaced, leading to pore opening and rhodamine B release. This delivery was ascribed to 5-HT_2A receptor antibody detachment from the surface due to its stronger coordination with 25I-NBOMe present in the solution. The prepared nanodevice allowed the sensitive (limit of detection of 0.6 μm) and selective recognition of the 25I-NBOMe drug (cocaine, heroin, mescaline, lysergic acid diethylamide, MDMA, and morphine were unable to induce pore opening and rhodamine B release). This nanodevice acts as a highly sensitive and selective fluorometric probe for the 25I-NBOMe illicit drug in artificial saliva and in sweets.

Overview of the Evolution of Silica-Based Chromo-Fluorogenic Nanosensors

This review includes examples of silica-based, chromo-fluorogenic nanosensors with the aim of illustrating the evolution of the discipline in recent decades through relevant research developed in our group. Examples have been grouped according to the sensing strategies. A clear evolution from simply functionalized materials to new protocols involving molecular gates and the use of highly selective biomolecules such as antibodies and oligonucleotides is reported. Some final examples related to the evolution of chromogenic arrays and the possible use of nanoparticles to communicate with other nanoparticles or cells are also included. A total of 64 articles have been summarized, highlighting different sensing mechanisms.

Enzyme-Powered Gated Mesoporous Silica Nanomotors for On-Command Intracellular Payload Delivery

The introduction of stimuli-responsive cargo release capabilities on self-propelled micro- and nanomotors holds enormous potential in a number of applications in the biomedical field. Herein, we report the preparation of mesoporous silica nanoparticles gated with pH-responsive supramolecular nanovalves and equipped with urease enzymes which act as chemical engines to power the nanomotors. The nanoparticles are loaded with different cargo molecules ([Ru(bpy)₃]Cl₂ (bpy = 2,2'-bipyridine) or doxorubicin), grafted with benzimidazole groups on the outer surface, and capped by the formation of inclusion complexes between benzimidazole and cyclodextrin-modified urease. The nanomotor exhibits enhanced Brownian motion in the presence of urea. Moreover, no cargo is released at neutral pH, even in the presence of the biofuel urea, due to the blockage of the pores by the bulky benzimidazole:cyclodextrin-urease caps. Cargo delivery is only triggered on-command at acidic pH due to the protonation of benzimidazole groups, the dethreading of the supramolecular nanovalves, and the subsequent uncapping of the nanoparticles. Studies with HeLa cells indicate that the presence of biofuel urea enhances nanoparticle internalization and both [Ru(bpy)₃]Cl₂ or doxorubicin intracellular release due to the acidity of lysosomal compartments. Gated enzyme-powered nanomotors shown here display some of the requirements for ideal drug delivery carriers such as the capacity to self-propel and the ability to "sense" the environment and deliver the payload on demand in response to predefined stimuli.

A dual-functional HER2 aptamer-conjugated, pH-activated mesoporous silica nanocarrier-based drug delivery system provides in vitro synergistic cytotoxicity in HER2-positive breast cancer cells

Purpose: As well as functioning as a ligand that is selectively internalized by cells overexpressing human epidermal growth factor receptor-2 (HER2), HApt can exert cytotoxic effects by inducing cross-linking and subsequent translocation of HER2 to cytoplasmic vesicles, such downregulation of HER2 inhibits cell proliferation and induces apoptosis. We aimed to exploit the potential of HApt as both a targeting agent and antagonist to maximize the efficacy of mesoporous silica nanoparticle (MSN)-based drug release systems for HER2-positive breast cancer. Materials and methods: We fabricated novel HApt aptamer-functionalized pH-sensitive β-cyclodextrin (β-CD)-capped doxorubicin (DOX)-loaded mesoporous silica nanoparticles (termed MSN-BM/CD-HApt@DOX) for targeted delivery and selective targeting of HER2-positive cells. MSN-functionalized benzimidazole (MSN-BM) was used to load and achieve pH stimuli-responsive release of the chemotherapeutic agent doxorubicin (DOX). β-cyclodextrin was introduced as a gatekeeper for encapsulated DOX and HApt as a selective HER2-targeting moiety and biotherapeutic agent. Results: Physical and chemical characterizations (FT-IR, XRD, TEM and BET) confirmed successful construction of MSN-BM/CD-HApt@DOX nanoparticles. In vitro release assays verified pH-sensitive DOX release. MSN-BM/CD-HApt@DOX (relative DOX concentration, 3.6 μg/mL) underwent HER2-mediated endocytosis and was more cytotoxic to HER2-positive SKBR3 cells than HER2-negative MCF7 cells. MSN-BM/CD-HApt@DOX also exhibited better uptake and stronger growth inhibition in SKBR3 cells than the control MSN-BM/CD-NCApt@DOX functionalized with a scrambled nucleotide sequence on CD. Overall, intracellular delivery of DOX and the biotherapeutic agent HApt resulted in synergistic cytotoxic effects in HER2-positive cancer cells in comparison to either DOX or HApt alone. Conclusion: MSN-BM/CD-HApt@DOX enables HER2-mediated targeting and biotherapeutic effects as well as pH-responsive DOX drug release, resulting in synergistic cytotoxic effects in HER2-overexpressing cells in vitro. This novel nanocarrier could potentially enable specific targeting to improve the efficacy of chemotherapy for HER2-positive cancer.

New insights into the structure-performance relationships of mesoporous materials in analytical science

Mesoporous materials are ideal carriers for guest molecules and they have been widely used in analytical science. The unique mesoporous structure provides special properties including large specific surface area, tunable pore size, and excellent pore connectivity. The structural properties of mesoporous materials have been largely made use of to improve the performance of analytical methods. For instance, the large specific surface area of mesoporous materials can provide abundant active sites and increase the probability of contact between analytes and active sites to produce stronger signals, thus leading to the improvement of detection sensitivity. The connections between analytical performances and the structural properties of mesoporous materials have not been discussed previously. Understanding the "structure-performance relationship" is highly important for the development of analytical methods with excellent performance based on mesoporous materials. In this review, we discuss the structural properties of mesoporous materials that can be optimized to improve the analytical performance. The discussion is divided into five sections according to the analytical performances: (i) selectivity-related structural properties, (ii) sensitivity-related structural properties, (iii) response time-related structural properties, (iv) stability-related structural properties, and (v) recovery time-related structural properties.

One-pot synthesis of a metal-organic framework-based drug carrier for intelligent glucose-responsive insulin delivery

We have developed a glucose-responsive metal-organic framework (MOF)-based insulin delivery nanosystem via a one-pot process. The system relies on the MOF response to glucose stimulation and this can promote insulin delivery. This nanosystem was successfully applied for glucose-responsive and self-regulated insulin release.

Fluorescent Nanobiosensors for Sensing Glucose

Glucose sensing in diabetes diagnosis and therapy is of great importance due to the prevalence of diabetes in the world. Furthermore, glucose sensing is also critical in the food and drug industries. Sensing glucose has been accomplished through various strategies, such as electrochemical or optical methods. Novel transducers made with nanomaterials that integrate fluorescent techniques have allowed for the development of advanced glucose sensors with superior sensitivity and convenience. In this review, glucose sensing by fluorescent nanobiosensor systems is discussed. Firstly, typical fluorescence emitting/interacting nanomaterials utilized in various glucose assays are discussed. Secondly, strategies for integrating fluorescent nanomaterials and biological sensing elements are reviewed and discussed. In summary, this review highlights the applicability of fluorescent nanomaterials, which makes them ideal for glucose sensing. Insight on the future direction of fluorescent nanobiosensor systems is also provided.

ATP-Decorated Mesoporous Silica for Biomineralization of Calcium Carbonate and P2 Purinergic Receptor-Mediated Antitumor Activity against Aggressive Lymphoma

Adenosine triphosphate (ATP) is an important transmitter that mediates various biological effects via purinergic receptors (P2 receptors) in cancer. We investigated the antitumor activity of ATP-decorated and doxorubicin (DOX)-loaded mesoporous silica with biomineralization of calcium carbonate against a highly aggressive and metastatic murine lymphoma called Dalton's lymphoma (DL). Our results suggest that this nanocomposite has unique effects with respect to the morphology and properties of calcium carbonate on the surface of the nanoparticle. DOX in the nanoparticles was prevented from quick release via the interactions of the phosphate group present on ATP and calcium carbonate. This construct is significantly tumoricidal against parental and DOX-resistant DL cells and is thus a promising candidate for applications in drug delivery. The composite nanomaterial has excellent biocompatibility with higher uptake and acts via the participation of the purinergic receptor P2X7. The nanocomposite induces significantly higher apoptosis in tumor cells compared with DOX alone. Treatment of DL-bearing mice with the construct significantly reduces tumor burden, in addition to augmenting the lifespan of tumor-bearing mice as demonstrated by a sustained healthy life of the animals and improved histopathological parameters.

Glucose-sensitive polymer nanoparticles for self-regulated drug delivery

Glucose-sensitive drug delivery systems, which can continuously and automatically regulate drug release based on the concentration of glucose, have attracted much interest in recent years. Self-regulated drug delivery platforms have potential application in diabetes treatment to reduce the intervention and improve the quality of life for patients. At present, there are three types of glucose-sensitive drug delivery systems based on glucose oxidase (GOD), concanavalin A (Con A), and phenylboronic acid (PBA) respectively. This review covers the recent advances in GOD-, Con A-, or PBA-mediated glucose-sensitive nanoscale drug delivery systems, and provides their major challenges and opportunities.

Mesoporous Silica Nanoparticles for Drug Delivery: Current Insights

This manuscript reviews the recent progress on mesoporous silica nanoparticles as drug delivery systems. Their intrinsic structural, textural and chemical features permit to design versatile multifunctional nanosystems with the capability to target the diseased tissue and release the cargo on demand upon exposition to internal or external stimuli. The degradation rate of these nanocarriers in diverse physiological fluids is overviewed obeying their significance for their potential translation towards clinical applications. To conclude, the balance between the benefits and downsides of this revolutionary nanotechnological tool is also discussed.

Synthesis and Insecticidal Activity of Enzyme-Triggered Functionalized Hollow Mesoporous Silica for Controlled Release

In the present study, enzymatic responsive controlled release formulations (CRFs) were fabricated. The CRFs were achieved by anchoring mechanically interlocked molecules using α-cyclodextrin onto the surface pore rims of hollow mesoporous silica (HMS). The CRFs were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The results showed that the CRFs had extraordinary loading ability for chlorantraniliprole (42% w/w) and could effectively preserve chlorantraniliprole against degradation under thermal conditions and UV radiation. The CRFs have been proven to be enzyme-sensitive. The release ratio of chlorantraniliprole from CRFs can be accelerated observably when external α-amylase was introduced. The persistence of CRFs was evaluated by regular sampling feeding experiment using Plutella xylostella as the target insect. The results showed that the larval mortality of P. xylostella was much higher than that of Coragen under all concentrations after 14 days, which proved that CRFs had remarkable persistence.

Glucose Oxidase-Based Glucose-Sensitive Drug Delivery for Diabetes Treatment

The glucose-sensitive drug delivery systems based on glucose oxidase (GOD), which exhibit highly promising applications in diabetes therapy, have attracted much more interest in recent years. The self-regulated drug delivery systems regulate drug release by glucose concentration automatically and continuously to control the blood glucose level (BGL) in normoglycemic state. This review covers the recent advances at the developments of GOD-based glucose-sensitive drug delivery systems and their in vivo applications for diabetes treatment. The applications of GOD-immobilized platforms, such as self-assembly layer-by-layer (LbL) films and polymer vesicles, cross-linking hydrogels and microgels, hybrid mesoporous silica nanoparticles, and microdevices fabricated with insulin reservoirs have been surveyed. The glucose-sensitive drug delivery systems based on GOD are expected to be a typical candidate for smart platforms for potential applications in diabetes therapy.

Redox-Responsive Polysulfide-Based Biodegradable Organosilica Nanoparticles for Delivery of Bioactive Agents

Design and development of silica nanoparticles (SiO2 NPs) with a controlled degradation profile promises effective drug delivery with a predetermined carrier elimination profile. In this research, we fabricated a series of redox-responsive polysulfide-based biodegradable SiO2 NPs with low polydispersity and with variations in size (average diameters of 58 ± 7, 108 ± 11, 110 ± 9, 124 ± 9, and 332 ± 6 nm), porosity, and composition (disulfide vs tetrasulfide bonds). The degradation kinetics of the nanoparticles was analyzed in the presence of 8 mM glutathione (GSH), mimicking the intracellular reducing condition. Results indicate that porosity and core composition play the predominant roles in the degradation rate of these nanoparticles. The 108 nm mesoporous disulfide-based nanoparticles showed the highest degradation rate among all the synthesized nanoparticles. Transmission electron microscopy (TEM) reveals that nonporous nanoparticles undergo surface erosion, while porous nanoparticles undergo both surface and bulk erosion under reducing environment. The cytotoxicity of these nanoparticles in RAW 264.7 macrophages was evaluated. Results show that all these nanoparticles with the IC50 values ranging from 233 ± 42 to 705 ± 17 μg mL-1 do not have cytotoxic effect in macrophages at concentrations less than 125 μg mL-1. The degradation products of these nanoparticles collected within 15 days did not show cytotoxicity in the same macrophage cell line after 24 h of incubation. In vitro doxorubicin (DOX) release was examined in 108 nm mesoporous disulfide-based nanoparticles in the absence and presence of 8 mM GSH. It was shown that drug release depends on intracellular reducing conditions. Due to their ease of synthesis and scale up, robust structure, and the ability to control size, composition, release, and elimination, biodegradable SiO2 NPs provide an alternative platform for delivery of bioactive and imaging agents.

Acetylcholinesterase-capped Mesoporous Silica Nanoparticles Controlled by the Presence of Inhibitors

Two different acetylcholinesterase (AChE)-capped mesoporous silica nanoparticles (MSNs), S1-AChE and S2-AChE, were prepared and characterized. MSNs were loaded with rhodamine B and the external surface was functionalized with either pyridostigmine derivative P1 (to yield solid S1) or neostigmine derivative P2 (to obtain S2). The final capped materials were obtained by coordinating grafted P1 or P2 with AChE's active sites (to give S1-AChE and S2-AChE, respectively). Both materials were able to release rhodamine B in the presence of diisopropylfluorophosphate (DFP) or neostigmine in a concentration-dependent manner via the competitive displacement of AChE through DFP and neostigmine coordination with the AChE's active sites. The responses of S1-AChE and S2-AChE were also tested with other enzyme inhibitors and substrates. These studies suggest that S1-AChE nanoparticles can be used for the selective detection of nerve agent simulant DFP and paraoxon.

Mesoporous silica materials for controlled delivery based on enzymes

This review summarises examples of capped mesoporous silica materials for controlled delivery that use enzymes as external triggers or functional components of the gating ensemble.

Molecular gates in mesoporous bioactive glasses for the treatment of bone tumors and infection

Silica mesoporous nanomaterials have been proved to have meaningful application in biotechnology and biomedicine. Particularly, mesoporous bioactive glasses are recently gaining importance thanks to their bone regenerative properties. Moreover, the mesoporous nature of these materials makes them suitable for drug delivery applications, opening new lines in the field of bone therapies. In this work, we have developed innovative nanodevices based on the implementation of adenosine triphosphate (ATP) and ε-poly-l-lysine molecular gates using a mesoporous bioglass as an inorganic support. The systems have been previously proved to work properly with a fluorescence probe and subsequently with an antibiotic (levofloxacin) and an antitumoral drug (doxorubicin). The bioactivity of the prepared materials has also been tested, giving promising results. Finally, in vitro cell culture studies have been carried out; demonstrating that this gated devices can provide useful approaches for bone cancer and bone infection treatments.

STATEMENT OF SIGNIFICANCE

Molecular-gated materials have recently been drawing attention due to their applications in fields as biomedicine and molecular recognition. For the first time as we are aware, we report herein a new enzymatic responsive molecular-gated device consisting in a mesoporous bioactive glass support implemented with two different molecular gates. Both controlled drug delivery properties and apatite-like phase formation ability of the device have been demonstrated, getting promising results. This approach opens up the possibility of developing new stimuli-responsive tailored bio-materials for bone cancer and infection treatments as well as regenerative bone grafts.