Homogeneous Catalyzed Direct Conversion of Furfural to Gamma-Valerolactone

Herein, we report the direct conversion of biomass-derived furfural to γ-valerolactone (GVL) in a one-pot system, using the combination of Ru-MACHO-BH and a Brønsted acid (H3PO4). A GVL yield of 84 % is achieved under mild reaction conditions using 1 mol% of Ru-MACHO-BH and 3.8 M H3PO4(aq) at 100 °C for 7 hours.

Production of hydrogen from alcohols via homogeneous catalytic transformations mediated by molecular transition-metal complexes

Hydrogen obtained from renewable sources such as water and alcohols is regarded as an efficient clean-burning alternative to non-renewable fuels. The use of the so-called bio-H2 regardless of its colour will be a significant step towards achieving global net-zero carbon goals. Challenges still persist however with conventional H2 storage, which include low-storage density and high cost of transportation apart from safety concerns. Global efforts have thus focussed on liquid organic hydrogen carriers (LOHCs), which have shown excellent potential for H2 storage while allowing safer large-scale transformation and easy on-site H2 generation. While water could be considered as the most convenient liquid inorganic hydrogen carrier (LIHC) on a long-term basis, the utilization of alcohols as LOHCs to generate on-demand H2 has tasted instant success. This has helped to draw a road-map of futuristic H2 storage and transportation. The current review brings to the fore the state-of-the-art developments in hydrogen generation from readily available, feed-agnostic bio-alcohols as LOHCs using molecular transition-metal catalysts.

Recent progress in molecular transition metal catalysts for hydrogen production from methanol and formaldehyde

Hydrogen is considered as a potential alternative and sustainable energy carrier, but its safe storage and transportation are still challenging due to its low volumetric energy density. Notably, C1-based substrates, methanol and formaldehyde, containing high hydrogen contents of 12.5 wt% and 6.7 wt%, respectively, can release hydrogen on demand in the presence of a suitable catalyst. Advantageously, both methanol and aqueous formaldehyde are liquid at room temperature, and hence can be stored and transported considerably more safely than hydrogen gas. Moreover, these C1-based substrates can be produced from biomass waste and can also be regenerated from CO2, a greenhouse gas. In this review, the recent progress in hydrogen production from methanol and formaldehyde over noble to non-noble metal complex-based molecular transition metal catalysts is extensively reviewed. This review also focuses on the critical role of the structure-activity relationship of the catalyst in the dehydrogenation pathway.

The Mechanism of Markovnikov-Selective Epoxide Hydrogenolysis Catalyzed by Ruthenium PNN and PNP Pincer Complexes

The homogeneous catalysis of epoxide hydrogenolysis to give alcohols has recently received significant attention. Catalyst systems have been developed for the selective formation of either the Markovnikov (branched) or anti-Markovnikov (linear) alcohol product. Thus far, the reported catalysts exhibiting Markovnikov selectivity all feature the potential for Noyori/Shvo-type bifunctional catalysis, with either a RuH/NH or FeH/OH core structure. The proposed mechanisms of epoxide ring-opening have involved cooperative C-O bond hydrogenolysis involving the metal hydride and the acidic pendant group on the ligand, in analogy to the well-documented mechanism of polar double-bond hydrogenation exhibited by catalysts of this type. In this work, we present a combined computational/experimental study of the mechanism of epoxide hydrogenolysis catalyzed by Noyori-type PNP and PNN complexes of ruthenium. We find that, at least for these ruthenium systems, the previously proposed bifunctional pathway for epoxide ring-opening is energetically inaccessible; instead, the ring-opening proceeds through opposite-side nucleophilic attack of the ruthenium hydride on the epoxide carbon, without the involvement of the ligand N-H group. For both catalyst systems, the rate law and overall barrier predicted by density functional theory (DFT) are consistent with the results from kinetic studies.

Sustainable production of hydrogen with high purity from methanol and water at low temperatures

Carbon neutrality initiative has stimulated the development of the sustainable methodologies for hydrogen generation and safe storage. Aqueous-phase reforming methanol and H2O (APRM) has attracted the particular interests for their high gravimetric density and easy availability. Thus, to efficiently release hydrogen and significantly suppress CO generation at low temperatures without any additives is the sustainable pursuit of APRM. Herein, we demonstrate that the dual-active sites of Pt single-atoms and frustrated Lewis pairs (FLPs) on porous nanorods of CeO2 enable the efficient additive-free H2 generation with a low CO (0.027%) through APRM at 120 °C. Mechanism investigations illustrate that the Pt single-atoms and Lewis acidic sites cooperatively promote the activation of methanol. With the help of a spontaneous water dissociation on FLPs, Pt single-atoms exhibit a significantly improved reforming of *CO to promote H2 production and suppress CO generation. This finding provides a promising path towards the flexible hydrogen utilizations.

Methanol as a hydrogen source: room-temperature highly-selective transfer hydrogenation of α,β-unsaturated ketones

The described system offers an ideal, user-friendly protocol for the chemoselective homogeneous hydrogenation of α,β-unsaturated ketones at room temperature using methanol as a liquid organic hydrogen carrier. Excellent yields were achieved with an in situ-prepared phosphine-free Cp*Ir(III)/bipyridonate complex. Chemoselective reduction with other reducible functionalities and late-stage functionalization were also explored.

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Formic Acid Dehydrogenation Using Noble-Metal Nanoheterogeneous Catalysts: Towards Sustainable Hydrogen-Based Energy

The need for sustainable energy sources is now more urgent than ever, and hydrogen is significant in the future of energy. However, several obstacles remain in the way of widespread hydrogen use, most of which are related to transport and storage. Dilute formic acid (FA) is recognized asa a safe fuel for low-temperature fuel cells. This review examines FA as a potential hydrogen storage molecule that can be dehydrogenated to yield highly pure hydrogen (H2) and carbon dioxide (CO2) with very little carbon monoxide (CO) gas produced via nanoheterogeneous catalysts. It also present the use of Au and Pd as nanoheterogeneous catalysts for formic acid liquid phase decomposition, focusing on the influence of noble metals in monometallic, bimetallic, and trimetallic compositions on the catalytic dehydrogenation of FA under mild temperatures (20–50 °C). The review shows that FA production from CO2 without a base by direct catalytic carbon dioxide hydrogenation is far more sustainable than existing techniques. Finally, using FA as an energy carrier to selectively release hydrogen for fuel cell power generation appears to be a potential technique.

Homogeneous Catalysis for Sustainable Energy: Hydrogen and Methanol Economies, Fuels from Biomass, and Related Topics

As the world pledges to significantly cut carbon emissions, the demand for sustainable and clean energy has now become more important than ever. This includes both production and storage of energy carriers, a majority of which involve catalytic reactions. This article reviews recent developments of homogeneous catalysts in emerging applications of sustainable energy. The most important focus has been on hydrogen storage as several efficient homogeneous catalysts have been reported recently for (de)hydrogenative transformations promising to the hydrogen economy. Another direction that has been extensively covered in this review is that of the methanol economy. Homogeneous catalysts investigated for the production of methanol from CO2, CO, and HCOOH have been discussed in detail. Moreover, catalytic processes for the production of conventional fuels (higher alkanes such as diesel, wax) from biomass or lower alkanes have also been discussed. A section has also been dedicated to the production of ethylene glycol from CO and H2 using homogeneous catalysts. Well-defined transition metal complexes, in particular, pincer complexes, have been discussed in more detail due to their high activity and well-studied mechanisms.

Efficient Base-Free Aqueous Reforming of Methanol Homogeneously Catalyzed by Ruthenium Exhibiting a Remarkable Acceleration by Added Catalytic Thiol

Production of H2 by methanol reforming is of particular interest due the low cost, ready availability, and high hydrogen content of methanol. However, most current methods either require very high temperatures and pressures or strongly rely on the utilization of large amounts of base. Here we report an efficient, base-free aqueous-phase reforming of methanol homogeneously catalyzed by an acridine-based ruthenium pincer complex, the activity of which was unexpectedly improved by a catalytic amount of a thiol additive. The reactivity of this system is enhanced by nearly 2 orders of magnitude upon addition of the thiol, and it can maintain activity for over 3 weeks, achieving a total H2 turnover number of over 130 000. On the basis of both experimental and computational studies, a mechanism is proposed which involves outer-sphere dehydrogenations promoted by a unique ruthenium complex with thiolate as an assisting ligand. The current system overcomes the need for added base in homogeneous methanol reforming and also highlights the unprecedented acceleration of catalytic activity of metal complexes achieved by the addition of a catalytic amount of thiol.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Cyclometalated Ruthenium Pincer Complexes as Catalysts for the α-Alkylation of Ketones with Alcohols

Ruthenium PNP pincer complexes bearing supplementary cyclometalated C,N‐bound ligands have been prepared and fully characterized for the first time. By replacing CO and H⁻ as ancillary ligands in such complexes, additional electronic and steric modifications of this topical class of catalysts are possible. The advantages of the new catalysts are demonstrated in the general α‐alkylation of ketones with alcohols following a hydrogen autotransfer protocol. Herein, various aliphatic and benzylic alcohols were applied as green alkylating agents for ketones bearing aromatic, heteroaromatic or aliphatic substituents as well as cyclic ones. Mechanistic investigations revealed that during catalysis, Ru carboxylate complexes are predominantly formed whereas neither the PNP nor the CN ligand are released from the catalyst in significant amounts.

Catalytic oxidations by dehydrogenation of alkanes, alcohols and amines with defined (non)-noble metal pincer complexes

The present review highlights the latest developments in the field of transition metal-catalysed oxidations, in particular C–C–, C–O– and C–N-bond dehydrogenations.

Room-temperature hydrogen generation from water and nanoscale Fe catalyzed by Pd

Production of pure H₂ through a redox reaction between water and Fe nanoparticles at room temperature.

DFT Provides Insight into the Additive-Free Conversion of Aqueous Methanol to Dihydrogen Catalyzed by [Ru(trop2dad)]: Importance of the (Electronic) Flexibility of the Diazadiene Moiety

The mechanism for complete dehydrogenation of aqueous methanol to CO₂ and three equivalents of H₂ catalyzed by [Ru(trop₂dad)] was investigated with DFT (trop₂dad = 1,4-bis(5H-dibenzo[a,d]cyclohepten-5-yl)-1,4-diazabuta-1,3-diene). To date, this is the only catalyst that promotes the acceptorless dehydrogenation of aqueous methanol in homogeneous phase under mild conditions without the addition of an additive (base, acid, or a secondary catalyst). A detailed understanding of the mechanism of this transformation may therefore be of significant importance for the conversion of liquid organic fuels. Previous computational studies using simplified models of the catalyst suggested entirely ligand-centered reaction pathways with rather high-energy barriers for complete dehydrogenation of aqueous methanol. These are, however, not consistent with the experimental data. In the present paper, we reveal a different reaction mechanism for aqueous methanol dehydrogenation that involves metal–ligand cooperativity involving the diazadiene (dad) ligand and has substantially lower barriers, in good agreement with the experimental data. The dad moiety of the ligand actively participates in the alcohol activation mechanism. In the first step of the reaction, the dad ligand rearranges from a σ- to a π-bound coordination mode. This adjusts the electronic structure of both the metal and the ligand, leading to an enhanced Brønsted basicity of the nitrogen centers and higher Lewis acidity of the ruthenium center. As a result, concerted proton-hydride transfer to/from metal-hydride and N-protonated dad-ligand moieties becomes possible, leading to low-barrier metal–ligand cooperative elementary steps for alcohol activation and H₂ elimination.

CO2-based hydrogen storage – hydrogen liberation from methanol/water mixtures and from anhydrous methanol

New strategies for the reforming of methanol under mild conditions on the basis of heterogeneous and molecular catalysts have raised the hopes and expectations on this fuel. This contribution will focus on the progress achieved in the production of hydrogen from aqueous and anhydrous methanol with molecular and heterogeneous catalysts. The report entails thermal approaches, as well as light-triggered dehydrogenation reactions. A comparison of the efficiency and mechanistic aspects will be made and principles of catalytic pathways operating in biological systems will be also addressed.

N-Monomethylation of Aromatic Amines with Methanol via PNHP-Pincer Ru Catalysts

The use of methanol for the selective methylation of aromatic amines with RuHCl(CO)(PN^HP) (PN^HP = bis(2-diphenylphosphinoethyl)amine) is reported. Various aromatic amines were transformed into their corresponding monomethylated secondary amines in high yields at 150 °C with a very low catalyst loading (0.02-0.1 mol %) in the presence of KO ^tBu (20-60 mol %). The catalyst precursor, RuHCl(CO)(PN^HP), was converted to [RuH(CO)₂(PN^HP)]⁺ under the catalytic conditions and also serves as a highly effective catalyst. The robustness of this catalyst contributes to its outstanding catalytic activity, even under reaction conditions, in which CO is liberated from methanol.

A leap forward in iridium-NHC catalysis: new horizons and mechanistic insights

This review summarises the most recent advances in Ir-NHC catalysis while revisiting all the classical reactions in which this type of catalyst has proved to be active. The influence of the ligand system and, in particular, the impact of the NHC ligand on the activity and selectivity of the reaction have been analysed, accompanied by an examination of the great variety of catalytic cycles hitherto reported. The reaction mechanisms so far proposed are described and commented on for each individual process. Moreover, some general considerations that attempt to explain the influence of the NHC from a mechanistic viewpoint are presented at the end of the review. The first sections are dedicated to the most widely explored reactions that use Ir-NHCs, i.e., hydrogenation and transfer hydrogenation, for which a general overview that tries to compile all the Ir-NHC catalysts hitherto reported for these processes is provided. The next sections deal with hydrogen borrowing, hydrosilylation, water splitting, dehydrogenation (of alcohols, alkanes, aminoboranes and formic acid), hydrogen isotope exchange (HIE), signal amplification by reversible exchange and C-H bond functionalisation (silylation and borylation). The last section compiles a series of reactions somewhat less explored for Ir-NHC catalysts that include the hydroalkynylation of imines, hydroamination, diboration of olefins, hydrolysis and methanolysis of silanes, arylation of aldehydes with boronic acids, addition of aroyl chlorides to alkynes, visible light driven reactions, isomerisation of alkenes, asymmetric intramolecular allylic amination and reactions that employ heterometallic catalysts containing at least one Ir-NHC unit.

Methanol-Water Aqueous-Phase Reforming with the Assistance of Dehydrogenases at Near-Room Temperature

As an excellent hydrogen-storage medium, methanol has many advantages, such as high hydrogen content (12.6 wt %), low cost, and availability from biomass or photocatalysis. However, conventional methanol-water reforming usually proceeds at high temperatures. In this research, we successfully designed a new effective strategy to generate hydrogen from methanol at near-room temperature. The strategy involved two main processes: CH₃ OH→HCOOH→H₂ and NADH→HCOOH→H₂ . The first process (CH₃ OH→HCOOH→H₂ ) was performed by an alcohol dehydrogenase (ADH), an aldehyde dehydrogenase (ALDH), and an Ir catalyst. The second procedure (NADH→HCOOH→H₂ ) was performed by formate dehydrogenase (FDH) and the Ir catalyst. The Ir catalyst used was a previously reported polymer complex catalyst [Cp*IrCl₂ (ppy); Cp*=pentamethylcyclopentadienyl, ppy=polypyrrole] with high catalytic activity for the decomposition of formic acid at room temperature and is compatible with enzymes, coenzymes, and poisoning chemicals. Our results revealed that the optimum hydrogen generation rate could reach up to 17.8 μmol h^-1  g_cat^-1 under weak basic conditions at 30 °C. This will have high impact on hydrogen storage, production, and applications and should also provide new inspiration for hydrogen generation from methanol.

Preparation and use of DMF-stabilized iridium nanoclusters as methylation catalysts using methanol as the C1 source

We report methylations of alcohols and anilines catalyzed by DMF-stabilized Ir nanoclusters using methanol as the C1 source. The DMF-stabilized Ir nanoclusters were prepared in one step and have diameters of 1-1.5 nm. They react in a borrowing-hydrogen reaction and are efficient methylation catalysts (TON up to 310 000).

CO2-based hydrogen storage: CO2 hydrogenation to formic acid, formaldehyde and methanol

The storage of hydrogen via hydrogenation of CO2 to small organic molecules can be attractive for mobile applications. In this article, the state of the art regarding hydrogen storage in Methanol, Formic Acid as well as Formaldehyde and derivates based on CO2 hydrogenation is summarized. The reverse reaction, the release of hydrogen from these molecules is also crucial and described in the articles together with possible concepts for the use of hydrogen storage by CO2 hydrogenation.

Hydrogen generation from methanol at near-room temperature

As a promising hydrogen storage medium methanol has many advantages such as a high hydrogen content (12.5 wt%) and low-cost. However, conventional methanol-water reforming methods usually require a high temperature (>200 °C). In this research, we successfully designed an effective strategy to fully convert methanol to hydrogen for at least 1900 min (∼32 h) at near-room temperature. The strategy involves two main procedures, which are CH3OH → HCOOH → H2 and CH3OH → NADH → H2. HCOOH and the reduced form of nicotinamide adenine dinucleotide (NADH) are simultaneously produced through the dehydrogenation of methanol by the cooperation of alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ALDH). Subsequently, HCOOH is converted to H2 by a new iridium polymer complex catalyst and an enzyme mimic is used to convert NADH to H2 and nicotinamide adenine dinucleotide (NAD+). NAD+ can then be reconverted to NADH by repeating the dehydrogenation of methanol. This strategy and the catalysts invented in this research can also be applied to hydrogen production from other small organic molecules (e.g. ethanol) or biomass (e.g. glucose), and thus will have a high impact on hydrogen storage and applications.

Homogeneously catalysed conversion of aqueous formaldehyde to H2 and carbonate

Small organic molecules provide a promising solution for the requirement to store large amounts of hydrogen in a future hydrogen-based energy system. Herein, we report that diolefin-ruthenium complexes containing the chemically and redox non-innocent ligand trop₂dad catalyse the production of H₂ from formaldehyde and water in the presence of a base. The process involves the catalytic conversion to carbonate salt using aqueous solutions and is the fastest reported for acceptorless formalin dehydrogenation to date. A mechanism supported by density functional theory calculations postulates protonation of a ruthenium hydride to form a low-valent active species, the reversible uptake of dihydrogen by the ligand and active participation of both the ligand and the metal in substrate activation and dihydrogen bond formation.

Reversible Hydrogenation of Carbon Dioxide to Formic Acid and Methanol: Lewis Acid Enhancement of Base Metal Catalysts

New and sustainable energy vectors are required as a consequence of the environmental issues associated with the continued use of fossil fuels. H₂ is a potential clean energy source, but as a result of problems associated with its storage and transport as a gas, chemical H₂ storage (CHS), which involves the dehydrogenation of small molecules, is an attractive alternative. In principle, formic acid (FA, 4.4 wt % H₂) and methanol (MeOH, 12.6 wt % H₂) can be obtained renewably and are excellent prospective liquid CHS materials. In addition, MeOH has considerable potential both as a direct replacement for gasoline and as a fuel cell input. The current commercial syntheses of FA and MeOH, however, use nonrenewable feedstocks and will not facilitate the use of these molecules for CHS. An appealing option for the sustainable synthesis of both FA and MeOH, which could be implemented on a large scale, is the direct metal catalyzed hydrogenation of CO₂. Furthermore, given that CO₂ is a readily available, nontoxic and inexpensive source of carbon, it is expected that there will be economic and environmental benefits from using CO₂ as a feedstock. One strategy to facilitate both the dehydrogenation of FA and MeOH and the hydrogenation of CO₂ and H₂ to FA and MeOH is to utilize a homogeneous transition metal catalyst. In particular, the development of catalysts based on first row transition metals, which are cheaper, and more abundant than their precious metal counterparts, is desirable. In this Account, we describe recent advances in the development of iron and cobalt systems for the hydrogenation of CO₂ to FA and MeOH and the dehydrogenation of FA and MeOH and provide a brief comparison between precious metal and base metal systems. We highlight the different ligands that have been used to stabilize first row transition metal catalysts and discuss the use of additives to promote catalytic activity. In particular, the Account focuses on the crucial role that alkali metal Lewis acid cocatalysts can play in promoting increased activity and catalyst stability for first row transition metal systems. We relate these effects to the nature of the elementary steps in the catalytic cycle and describe how the Lewis acids stabilize the crucial transition states. For all four transformations, we discuss in detail the currently proposed catalytic pathways, and throughout the Account we identify mechanistic similarities among catalysts for the four processes. The limitations of current catalytic systems are detailed, and suggestions are provided on the improvements that are likely required to develop catalysts that are more stable, active, and practical.

Hydrogen generation from glucose catalyzed by organoruthenium catalysts under mild conditions

Concerns about the depletion of fossil fuel reserves and environmental pollution make hydrogen an attractive alternative energy source. Here, we first describe a catalytic reaction system that produces H₂ from glucose using a homogeneous catalyst [(p-cymene)Ru(NH₃)]Cl₂ with the maximum TOF = 719 h^-1 at 98 °C and an initial pH = 0.5.