Phosphine selenides: versatile NMR probes for analyzing hydrogen OH⋯Se and halogen I⋯Se bonds

Nuclear magnetic resonance (NMR) spectroscopy is a powerful tool for studying the structure and dynamics of various non-covalent interactions. However, often spectral parameters that are applicable for estimation of parameters of one type of non-covalent interaction will be inapplicable for another. Therefore, researchers are compelled to use spectral parameters that are specifically tailored to the type of non-covalent interaction being studied. This complexity makes it difficult to compare different types of non-covalent interactions with each other and, consequently, to establish a strict unified classification for them. This pioneering study proposes to use phosphine selenides as universal probes for investigating hydrogen and halogen bonding in solution. The study was carried out using the example of triethylphosphine selenide Et3PSe complexes with hydrogen bonds of Se⋯HO type and R3PSe (where R: Me, Et, n-Bu, t-Bu and Ph) with halogen bonds of Se⋯X type (where X: I and Br) in solution. The presence of non-covalent interactions was confirmed experimentally by means of 1H, 31P and 77Se NMR, as well as by quantum chemical calculation methods (optimization: PW6B95-D3/def2-QZVP; NMR: B97-2/pcsSeg-2).

Relation between Halogen Bond Strength and IR and NMR Spectroscopic Markers

The relationship between the strength of a halogen bond (XB) and various IR and NMR spectroscopic quantities is assessed through DFT calculations. Three different Lewis acids place a Br or I atom on a phenyl ring; each is paired with a collection of N and O bases of varying electron donor power. The weakest of the XBs display a C-X bond contraction coupled with a blue shift in the associated frequency, whereas the reverse trends occur for the stronger bonds. The best correlations with the XB interaction energy are observed with the NMR shielding of the C atom directly bonded to X and the coupling constants involving the C-X bond and the C-H/F bond that lies ortho to the X substituent, but these correlations are not accurate enough for the quantitative assessment of energy. These correlations tend to improve as the Lewis acid becomes more potent, which makes for a wider range of XB strengths.

Mixed-Halide Perovskites with Halogen Bond Induced Interlayer Locking Structure for Stable Pure-Red PeLEDs

Mixed-halide perovskites enable precise spectral tuning across the entire spectral range through composition engineering. However, mixed halide perovskites are susceptible to ion migration under continuous illumination or electric field, which significantly impedes the actual application of perovskite light-emitting diodes (PeLEDs). Here, we demonstrate a novel approach to introduce strong and homogeneous halogen bonds within the quasi-two-dimensional perovskite lattices by means of an interlayer locking structure, which effectively suppresses ion migration by increasing the corresponding activation energy. Various characterizations confirmed that intralattice halogen bonds enhance the stability of quasi-2D mixed-halide perovskite films. Here, we report that the PeLEDs exhibit an impressive 18.3% EQE with pure red emission with CIE color coordinate of (0.67, 0.33) matching Rec. 2100 standards and demonstrate an operational half-life of ∼540 min at an initial luminance of 100 cd m^-2, representing one of the most stable mixed-halide pure red PeLEDs reported to date.

Exploring Au(i) involving halogen bonding with N-heterocyclic carbene Au(i) aryl complexes in crystalline media

Among the known types of non-covalent interactions with a Au(i) metal center, Au(i) involving halogen bonding (XB) remains a rare phenomenon that has not been studied systematically. Herein, using five N-heterocyclic carbene (NHC) Au(i) aryl complexes and two iodoperfluoroarenes as XB donors, we demonstrated that the XB involving the Au(i) metal center can be predictably obtained for neutral Au(i) complexes using the example of nine co-crystals. The presence of XB involving the Au(i) center was experimentally investigated by single-crystal X-ray diffraction and solid-state ¹³C CP-MAS NMR methods, and their nature was elucidated through DFT calculations, followed by electron density, electrostatic potential, and orbital analyses. The obtained results revealed a connection between the structure and HOMO localization of Au(i) complexes as XB acceptors, and the geometrical, electronic, and spectroscopic features of XB interactions, as well as the supramolecular structure of the co-crystals.

Anticooperativity and Competition in Some Cocrystals Featuring Iodine-Nitrogen Halogen Bonds

Phenomena such as anticooperativity and competition among non-covalent bond donors and acceptors are key considerations when exploring the polymorphic and stoichiomorphic landscapes of binary and higher-order cocrystalline architectures. We describe the preparation of four cocrystals of 1,3,5-trifluoro-2,4,6-triiodobenzene with N-heterocyclic compounds, namely acridine, 3-aminopyridine, 4-methylaminopyridine, and 1,2-di(4-pyridyl)ethane. The cocrystals, which are characterized by single-crystal and powder X-ray diffraction experiments, all show moderately strong and directional iodine⋅⋅⋅nitrogen halogen bonds with reduced distance parameters ranging from 0.79 to 0.92 and carbon-iodine⋅⋅⋅nitrogen bond angles ranging from 165.4(3) to 175.31(7)°. The cocrystal comprising 1,3,5-trifluoro-2,4,6-triiodobenzene and acridine provides a relatively rare example where all three halogen bond donor sites form halogen bonds with three acceptor molecules, overcoming an anticooperative effect. This effect manifests itself through the lengthening of non-halogen-bonded C-I bonds, weakening their potential to form halogen bonds. The effect is only observed once two halogen bonds have been formed to 1,3,5-trifluoro-2,4,6-triiodobenzene; one such bond does not appear to be adequate. Among the four cocrystals studied, competition between the pyridyl nitrogen atoms and the amine nitrogen atoms suggests that the former are the preferred halogen bond acceptors. Analysis by Hirshfeld fingerprint plots and ¹³ C and ¹⁹ F magic-angle spinning solid-state nuclear magnetic resonance (NMR) spectroscopy provides additional insights into the prevalence of various short contacts in the crystal structures and into the spectral response to halogen-bond-induced cocrystallization.

Solid-state NMR Spectroscopy of Iodine(I) Complexes

Solid-state NMR has been applied to a series of Barluenga-type iodine(I) [L-I-L]PF₆ (L=pyridine, 4-ethylpyridine, 4-dimethylaminopyridine, isoquinoline) complexes as their hexafluorophosphate salts, as well as their respective non-liquid ligands (L), their precursor silver(I) complexes, and the respective N-methylated pyridinium and quinolinium hexafluorophoshate salts. These results are compared and contrasted to the corresponding solution studies and single-crystal X-ray structures. As the first study of its kind on the solid-state NMR behavior of halogen(I) complexes, practical considerations are also discussed to encourage wider utilization of this technique in the future.

Geminal Charge-Assisted Tetrel Bonds in Bis-Pyridinium Methylene Salts

C(sp³) atoms are known to act as electrophilic sites in self-assembly processes, and in all cases reported till now, they form only one interaction with nucleophiles; that is, they function as monodentate tetrel bond donors. This manuscript reports experimental (X-ray structural analysis) and theoretical evidence (DFT calculations), proving that the methylene carbon in bis-pyridinium methylene salts establishes two short and directional C(sp³)···anion interactions; that is, they function as bidentate tetrel bond donors.

Solid-state multinuclear magnetic resonance and X-ray crystallographic investigation of the phosphorus...iodine halogen bond in a bis(dicyclohexylphenylphosphine)(1,6-diiodoperfluorohexane) cocrystal

Halogen bonding to phosphorus atoms remains uncommon, with relatively few examples reported in the literature. Here, the preparation and investigation of the cocrystal bis(dicyclohexylphenylphosphine)(1,6-diiodoperfluorohexane) by X-ray crystallography and solid-state multinuclear magnetic resonance spectroscopy is described. The crystal structure features two crystallographically unique C-I...P halogen bonds [d_I...P = 3.090 (5) Å, 3.264 (5) Å] and crystallographic disorder of one of the 1,6-diiodoperfluorohexane molecules. The first of these is the shortest and most linear I...P halogen bond reported to date. ¹³C, ¹⁹F, and ³¹P magic angle spinning solid-state NMR spectra are reported. A ³¹P chemical shift change of -7.0 p.p.m. in the cocrystal relative to pure dicyclohexylphenylphosphine, consistent with halogen bond formation, is noted. This work establishes iodoperfluoroalkanes as viable halogen bond donors when paired with phosphorus acceptors, and also shows that dicyclohexylphenylphosphine can act as a practical halogen bond acceptor.

To what extent do bond length and angle govern the 13C and 1H NMR response to weak CH⋯O hydrogen bonds? A case study of caffeine and theophylline cocrystals

Weak hydrogen bonds are important structure-directing elements in supramolecular chemistry and biochemistry. We consider here weak CH⋯O hydrogen bonds in a series of cocrystals of theophylline and caffeine and assess to what extent the CH⋯O distance and angle govern the observed ¹³C and ¹H isotropic chemical shifts. Gauge-including projector-augmented wave density functional theory (GIPAW DFT) calculations consistently predict a decrease in the ¹³C and ¹H magnetic shielding constants upon hydrogen bond formation on the order of 2-5 ppm (¹³C) and 1-2 ppm (¹H). These trends are reproduced using the machine-learning approach implemented in ShiftML. Experimental ¹³C and ¹H chemical shifts obtained for powdered samples using one-dimensional NMR spectroscopy as well as heteronuclear correlation (HETCOR) spectroscopy correlate well with the GIPAW DFT results. However, the experimental ¹³C NMR response only correlates moderately well with the hydrogen bond length and angle, while the experimental ¹H chemical shifts only show very weak correlations to these local structural elements. DFT computations on isolated imidazole-formaldehyde models show that the ¹³C and ¹H chemical shifts generally decrease with the C⋯O distance but show no clear dependence on the CH⋯O angle. These results demonstrate that the ¹³C and ¹H response to weak CH⋯O hydrogen bonding is influenced significantly by additional weak contacts within cocrystal heterodimeric units.

I⋯N halogen bonding in 1 : 1 co-crystals formed between 1,4-diiodotetrafluorobenzene and the isomeric n-pyridinealdazines (n = 2, 3 and 4): assessment of supramolecular association and influence upon solid-state photoluminescence properties

1 : 1 co-crystals formed between 1,4-diiodotetrafluorobenzene and each of the three isomeric n-pyridinealdazines (n = 2, 3 and 4), featuring I⋯N halogen bonding contacts within one-dimensional chains, are described.

Towards hydrogen and halogen bonded frameworks based on 3,5-bis(triazolyl)pyridinium motifs

Construction of supramolecular assemblies using hydrogen and halogen bonding between anions and the 3,5-bis(triazolyl)pyridinium motif was investigated.

A toolbox for improving the workflow of NMR crystallography

NMR crystallography is a powerful tool with applications in structural characterization and crystal structure verification, to name two. However, applying this tool presents several challenges, especially for industrial users, in terms of consistency, workflow, time consumption, and the requirement for a high level of understanding of experimental solid-state NMR and GIPAW-DFT calculations. Here, we have developed a series of fully parameterized scripts for use in Materials Studio and TopSpin, based on the .magres file format, with a focus on organic molecules (e.g. pharmaceuticals), improving efficiency, robustness, and workflow. We separate these tools into three major categories: performing the DFT calculations, extracting & visualizing the results, and crystallographic modelling. These scripts will rapidly submit fully parameterized CASTEP jobs, extract data from the calculations, assist in visualizing the results, and expedite the process of structural modelling. Accompanied with these tools is a description on their functionality, documentation on how to get started and use the scripts, and links to video tutorials for guiding new users. Through the use of these tools, we hope to facilitate NMR crystallography and to harmonize the process across users.

Stoichiomorphic halogen-bonded cocrystals: a case study of 1,4-diiodotetrafluorobenzene and 3-nitropyridine

The concept of variable stoichiometry cocrystallization is explored in halogen-bonded systems. Three novel cocrystals of 1,4-diiodotetrafluorobenzene and 3-nitropyridine with molar ratios of 1:1, 2:1, and 1:2, respectively, are prepared by slow evaporation methods. Single-crystal X-ray diffraction analysis reveals key differences between each of the nominally similar cocrystals. For instance, the 1:1 cocrystal crystallizes in the P21/n space group and features a single chemically and crystallographically unique halogen bond between iodine and the pyridyl nitrogen. The 2:1 cocrystal crystallizes in the [Formula: see text] space group and features a halogen bond between iodine and one of the nitro oxygens in addition to an iodine–nitrogen halogen bond. The 1:2 cocrystal crystallizes with a large unit cell (V = 9896 Å3) in the Cc space group and features 10 crystallographically distinct iodine-nitrogen halogen bonds. Powder X-ray diffraction experiments carried out on the 1:1 and 2:1 cocrystals confirm that gentle grinding does not alter the crystal forms. 1H → 13C and 19F → 13C cross-polarization magic angle spinning (CP/MAS) NMR experiments performed on powdered samples of the 1:1 and 2:1 cocrystals are used as spectral editing tools to select for either the halogen bond acceptor or donor, respectively. Carbon-13 chemical shifts in the cocrystals are shown to change only very subtly relative to pure solid 1,4-diiodotetrafluorobenzene, but the shift of the carbon directly bonded to iodine nevertheless increases, consistent with halogen bond formation (e.g., a shift of +1.6 ppm for the 2:1 cocrystal). This work contributes new examples to the field of variable stoichiometry cocrystal engineering with halogen bonds.

Halogen bonding in the co-crystallization of potentially ditopic diiodotetrafluorobenzene: a powerful tool for constructing multicomponent supramolecular assemblies

Halogen bonding is emerging as a significant driving force for supramolecular self-assembly and has aroused great interest during the last two decades. Among the various halogen-bonding donors, we take notice of the ability of 1,4-diiodotetrafluorobenzene (1,4-DITFB) to co-crystallize with diverse halogen-bonding acceptors in the range from neutral Lewis bases (nitrogen-containing compounds, N-oxides, chalcogenides, aromatic hydrocarbons and organometallic complexes) to anions (halide ions, thio/selenocyanate ions and tetrahedral oxyanions), leading to a great variety of supramolecular architectures such as discrete assemblies, 1D infinite chains and 2D/3D networks. Some of them act as promising functional materials (e.g. fluorescence, phosphorescence, optical waveguide, laser, non-linear optics, dielectric and magnetism) and soft materials (e.g. liquid crystal and supramolecular gel). Here we focus on the supramolecular structures of multicomponent complexes and their related physicochemical properties, highlight representative examples and show clearly the main directions that remain to be developed and improved in this area. From the point of view of crystal engineering and supramolecular chemistry, the complexes summarized here should give helpful information for further design and investigation of the elusive category of halogen-bonding supramolecular functional materials.

Theoretical Studies of IR and NMR Spectral Changes Induced by Sigma-Hole Hydrogen, Halogen, Chalcogen, Pnicogen, and Tetrel Bonds in a Model Protein Environment

Various types of σ-hole bond complexes were formed with FX, HFY, H2FZ, and H3FT (X = Cl, Br, I; Y = S, Se, Te; Z = P, As, Sb; T = Si, Ge, Sn) as Lewis acid. In order to examine their interactions with a protein, N-methylacetamide (NMA), a model of the peptide linkage was used as the base. These noncovalent bonds were compared by computational means with H-bonds formed by NMA with XH molecules (X = F, Cl, Br, I). In all cases, the A-F bond, which lies opposite the base and is responsible for the σ-hole on the A atom (A refers to the bridging atom), elongates and its stretching frequency undergoes a shift to the red with a band intensification, much as what occurs for the X-H bond in a H-bond (HB). Unlike the NMR shielding decrease seen in the bridging proton of a H-bond, the shielding of the bridging A atom is increased. The spectroscopic changes within NMA are similar for H-bonds and the other noncovalent bonds. The C=O bond of the amide is lengthened and its stretching frequency red-shifted and intensified. The amide II band shifts to higher frequency and undergoes a small band weakening. The NMR shielding of the O atom directly involved in the bond rises, whereas the C and N atoms both undergo a shielding decrease. The frequency shifts of the amide I and II bands of the base as well as the shielding changes of the three pertinent NMA atoms correlate well with the strength of the noncovalent bond.

Rapid Identification of Halogen Bonds in Co-Crystalline Powders via 127 I Nuclear Quadrupole Resonance Spectroscopy

¹²⁷ I nuclear quadrupole resonance (NQR) spectroscopy is established as a rapid and robust method to indicate the formation of iodine-nitrogen halogen bonds in co-crystalline powders. Once the relevant spectral frequency range has been established, diagnostic ¹²⁷ I NQR spectra can be acquired in seconds. The method is demonstrated for a series of co-crystals of 1,4-diiodobenzene. Changes in the ¹²⁷ I quadrupolar coupling constant (C_Q ) by up to 74.4 MHz correlate with the length of the C-I donor covalent bond and inversely with the I⋅⋅⋅N halogen-bond length. The predictive power of this technique is validated on two previously unknown co-crystalline powders prepared mechanochemically. Single-crystal growth via co-sublimation and structure determination by single-crystal X-ray diffraction cross-validates the findings. Natural localized molecular-orbital analyses provide insight into the origins of the quadrupolar coupling constants.

Effects of Halogen, Chalcogen, Pnicogen, and Tetrel Bonds on IR and NMR Spectra

Complexes were formed pairing FX, FHY, FH2Z, and FH3T (X = Cl, Br, I; Y = S, Se, Te; Z = P, As, Sb; T = Si, Ge, Sn) with NH3 in order to form an A⋯N noncovalent bond, where A refers to the central atom. Geometries, energetics, atomic charges, and spectroscopic characteristics of these complexes were evaluated via DFT calculations. In all cases, the A-F bond, which is located opposite the base and is responsible for the σ-hole on the A atom, elongates and its stretching frequency undergoes a shift to the red. This shift varies from 42 to 175 cm-1 and is largest for the halogen bonds, followed by chalcogen, tetrel, and then pnicogen. The shift also decreases as the central A atom is enlarged. The NMR chemical shielding of the A atom is increased while that of the F and electron donor N atom are lowered. Unlike the IR frequency shifts, it is the third-row A atoms that undergo the largest change in NMR shielding. The change in shielding of A is highly variable, ranging from negligible for FSnH3 all the way up to 1675 ppm for FBr, while those of the F atom lie in the 55-422 ppm range. Although smaller in magnitude, the changes in the N shielding are still easily detectable, between 7 and 27 ppm.

Single-Crystal NMR Characterization of Halogen Bonds

Oxygen-17-enriched triphenylphosphine oxide and three of its halogen-bonded cocrystals featuring 1,4-diiodotetrafluorobenzene and 1,3,5-trifluoro-2,4,6-triiodobenzene as halogen bond donors have been characterized by ³¹P and ¹⁷O single-crystal NMR spectroscopy. Single-crystal NMR allows for the measurement of not only the magnitudes of various NMR interaction tensors, but also their orientations relative to the crystal lattice and therefore relative to the halogen bonds themselves. ³¹P chemical shift tensors, ¹⁷O chemical shift tensors, ¹⁷O quadrupolar coupling tensors, and ³¹P-¹⁷O indirect nuclear spin-spin (J) coupling tensors are reported here for P═O···I halogen bonds. The angular deviations in the directions of the pseudo-unique components of the ³¹P chemical shift tensors, the ¹⁷O chemical shift tensors, and the ¹⁷O quadrupolar coupling tensors from the direction of the oxygen-iodine halogen bond correlate with the deviations in linearity of the P═O···I halogen bond. There is also a clear decrease in anisotropy and an increase in asymmetry of the J(³¹P,¹⁷O) coupling tensors attributable to the formation of iodine-oxygen halogen bonds. The small but quantifiable changes in the tensors are consistent with the weak nature of these halogen bonds relative to the P═O motif. Overall, this work establishes single-crystal NMR as a novel probe of halogen bonds in solids. Analysis of the results has provided insights into the correlations between the magnitude and orientation of various NMR interaction tensors and the local geometry of the halogen bond. Gauge-including projector-augmented wave computations corroborate the experimental findings.

121/123Sb Nuclear Quadrupole Resonance Spectroscopy: Characterization of Non-Covalent Pnictogen Bonds and NQR Crystallography

Pnictogen (or pnicogen) bonding is an attractive interaction between the electrophilic region of group 15 elements (N, P, As, Sb, Bi) and a nucleophile. This interaction for which unique applications in catalysis have recently been uncovered continues to gain popularity. Here, we investigate a series of pnictogen-bonded cocrystals based on SbF₃ and SbCl₃, prepared via mechanochemical ball milling, with ^121/123Sb ( I = ⁵/₂ and ⁷/₂, respectively) nuclear quadrupole resonance (NQR) spectroscopy. Observed NQR frequency shifts upon cocrystallization are on the order of 0.1 to 10 MHz and are clearly diagnostic of the formation of pnictogen bonds to antimony. Further evidence for pnictogen bonding is obtained by complementary ¹³C cross-polarization magic-angle spinning solid-state NMR experiments. DFT calculations of NMR parameters as well as natural localized molecular orbital analyses support the experimental findings and elucidate the electronic origins of the experimental NQR frequency shifts. This work provides insights into the changes in the antimony quadrupolar coupling constant upon pnictogen bonding: strikingly, the decreases noted here parallel those known for hydrogen bonds, but contrast with the increases reported for halogen bonds. The utility of the observed antimony nuclear quadrupolar coupling constants in constraining structural models of cocrystals for which diffraction-based structures are unavailable, i.e., a rudimentary implementation of NQR crystallography, is established. Overall, this work offers a new approach to understand emerging classes of electrophilic interactions and to contextualize them in the broader landscape of established chemical bonding paradigms.

79/81Br nuclear quadrupole resonance spectroscopic characterization of halogen bonds in supramolecular assemblies

One- and two-dimensional bromine-79/81 NQR spectroscopy of halogen bond donors in a series of cocrystals shows changes in resonance frequency of up to 20 MHz and differentiates between crystallographically non-equivalent bromine sites.

Despite the applicability of solid-state NMR to study the halogen bond, the direct NMR detection of ^79/81Br covalently bonded to carbon remains impractical due to extremely large spectral widths, even at ultra-high magnetic fields. In contrast, nuclear quadrupole resonance (NQR) offers comparatively sharp resonances. Here, we demonstrate the abilities of ^79/81Br NQR to characterize the electronic changes in the C–Br···N halogen bonding motifs found in supramolecular assemblies constructed from 1,4-dibromotetrafluorobenzene and nitrogen-containing heterocycles. An increase in the bromine quadrupolar coupling constant is observed, which correlates linearly with the halogen bond distance (d_Br···N). Notably, ^79/81Br NQR is able to distinguish between two symmetry-independent halogen bonds in the same crystal structure. This approach offers a rapid and reliable indication for the occurrence of a halogen bond, with experimental times limited only by the observation of ^79/81Br NQR resonances.

Mechanochemistry and cocrystallization of 3-iodoethynylbenzoic acid with nitrogen-containing heterocycles: concurrent halogen and hydrogen bonding

Halogen-bonded and hydrogen-bonded cocrystals of 3-iodoethynylbenzoic acid and several nitrogen-containing heterocycles are formed using mechanochemical and solvent-based slow evaporation methods.

1,3,5-Tri(iodoethynyl)-2,4,6-trifluorobenzene: halogen-bonded frameworks and NMR spectroscopic analysis

Halogen bonding is the non-covalent interaction between the region of positive electrostatic potential associated with a covalently bonded halogen atom, named the σ-hole, and a Lewis base. Single-crystal X-ray diffraction structures are reported for a series of seven halogen-bonded cocrystals featuring 1,3,5-tris(iodoethynyl)-2,4,6-trifluorobenzene (1) as the halogen-bond donor, and bromide ions (as ammonium or phosphonium salts) as the halogen-bond acceptors: (1)·MePh3PBr, (1)·EtPh3PBr, (1)·acetonyl-Ph3PBr, (1)·Ph4PBr, (1)·[bis(4-fluorophenyl)methyl]triphenylphosphonium bromide, and two new polymorphs of (1)·Et3BuNBr. The cocrystals all feature moderately strong iodine–bromide halogen bonds. The crystal structure of pure [bis(4-fluorophenyl)methyl]triphenylphosphonium bromide is also reported. The results of a crystal engineering strategy of varying the size of the counter-cation are explored, and the features of the resulting framework materials are discussed. Given the potential utility of (1) in future crystal engineering applications, detailed NMR analyses (in solution and in the solid state) of this halogen-bond donor are also presented. In solution, complex13C and19F multiplets are explained by considering the delicate interplay between variousJcouplings and subtle isotope shifts. In the solid state, the formation of (1)·Et3BuNBr is shown through significant13C chemical shift changes relative to pure solid 1,3,5-tris(iodoethynyl)-2,4,6-trifluorobenzene.

13C and 19F solid-state NMR and X-ray crystallographic study of halogen-bonded frameworks featuring nitrogen-containing heterocycles

Halogen bonding is a noncovalent interaction between the electrophilic region of a halogen (σ-hole) and an electron donor. We report a crystallographic and structural analysis of halogen-bonded compounds by applying a combined X-ray diffraction (XRD) and solid-state nuclear magnetic resonance (SSNMR) approach. Single-crystal XRD was first used to characterize the halogen-bonded cocrystals formed between two fluorinated halogen-bond donors (1,4-diiodotetrafluorobenzene and 1,3,5-trifluoro-2,4,6-triiodobenzene) and several nitrogen-containing heterocycles (acridine, 1,10-phenanthroline, 2,3,5,6-tetramethylpyrazine, and hexamethylenetetramine). New structures are reported for the following three cocrystals, all in the P2₁/c space group: acridine-1,3,5-trifluoro-2,4,6-triiodobenzene (1/1), C₆F₃I₃·C₁₃H₉N, 1,10-phenanthroline-1,3,5-trifluoro-2,4,6-triiodobenzene (1/1), C₆F₃I₃·C₁₂H₈N₂, and 2,3,5,6-tetramethylpyrazine-1,3,5-trifluoro-2,4,6-triiodobenzene (1/1), C₆F₃I₃·C₈H₁₂N₂. ¹³C and ¹⁹F solid-state magic-angle spinning (MAS) NMR is shown to be a convenient method to characterize the structural features of the halogen-bond donor and acceptor, with chemical shifts attributable to cocrystal formation observed in the spectra of both nuclides. Cross polarization (CP) from ¹⁹F to ¹³C results in improved spectral sensitivity in characterizing the perfluorinated halogen-bond donor when compared to conventional ¹H CP. Gauge-including projector-augmented wave density functional theory (GIPAW DFT) calculations of magnetic shielding constants, along with optimization of the XRD structures, provide a final set of structures in best agreement with the experimental ¹³C and ¹⁹F chemical shifts. Data for carbons bonded to iodine remain outliers due to well-known relativistic effects.

The15N NMR chemical shift in the characterization of weak halogen bonding in solution

We have studied the applicability of¹⁵N NMR spectroscopy in the characterization of the very weak halogen bonds of nonfluorinated halogen bond donors with a nitrogenous Lewis base in solution. The ability of the technique to detect the relative strength of iodine-, bromine- and chlorine-centered halogen bonds, as well as solvent and substituent effects was evaluated. Whereas computations on the DFT level indicate that¹⁵N NMR chemical shifts reflect the diamagnetic deshielding associated with the formation of a weak halogen bond, the experimentally observed chemical shift differences were on the edge of detectability due to the low molar fraction of halogen-bonded complexes in solution. The formation of the analogous yet stronger hydrogen bond of phenols have induced approximately ten times larger chemical shift changes, and could be detected and correlated to the electronic properties of substituents of the hydrogen bond donors. Overall,¹⁵N NMR is shown to be a suitable tool for the characterization of comparably strong secondary interactions in solution, but not sufficiently accurate for the detection of the formation of thermodynamically labile, weak halogen bonded complexes.

Prospects for 207Pb solid-state NMR studies of lead tetrel bonds

The feasibility and value of ²⁰⁷Pb solid-state NMR experiments on compounds featuring lead tetrel bonds is explored. Although the definition remains to be formalized, lead tetrel bonds may be qualitatively described as existing when there is evidence of a net attractive interaction between an electrophilic region associated with lead in a molecular entity and a nucleophilic region in another, or the same, molecular entity. Unambiguous identification of lead tetrel bonds can be challenging due to the hypervalent tendency of lead. We report here a series of ²⁰⁷Pb solid-state NMR experiments on five metal–organic frameworks featuring lead coordinated to hydrazone-based ligands. Such frameworks may be held together in part by lead tetrel bonds. The acquisition of ²⁰⁷Pb solid-state NMR spectra for such materials is feasible and is readily accomplished using a combination of magic-angle spinning and Carr–Purcell–Meiboom–Gill methods in moderate to low applied magnetic fields. The lead centres are characterized by ²⁰⁷Pb isotropic chemical shifts ranging from −426 to −2591 ppm and chemical shift tensor spans ranging from 910 to 2681 ppm. Careful inspection of the structures of the compounds and the literature ²⁰⁷Pb NMR data may suggest that a tetrel bond to lead results in chemical shift parameters which are intermediate between those which are characteristic of holodirected and hemidirected lead coordination geometries. Challenges associated with DFT computations of the ²⁰⁷Pb NMR parameters are discussed. In summary, the ²⁰⁷Pb data for the compounds studied herein show a marked response to the presence of non-coordinating electron-rich moieties in close contact with the electrophilic surface of formally hemidirectionally coordinated lead compounds.

Natural Abundance 15 N and 13 C Solid-State NMR Chemical Shifts: High Sensitivity Probes of the Halogen Bond Geometry

Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a versatile characterization technique that can provide a plethora of information complementary to single crystal X-ray diffraction (SCXRD) analysis. Herein, we present an experimental and computational investigation of the relationship between the geometry of a halogen bond (XB) and the SSNMR chemical shifts of the non-quadrupolar nuclei either directly involved in the interaction (¹⁵ N) or covalently bonded to the halogen atom (¹³ C). We have prepared two series of X-bonded co-crystals based upon two different dipyridyl modules, and several halobenzenes and diiodoalkanes, as XB-donors. SCXRD structures of three novel co-crystals between 1,2-bis(4-pyridyl)ethane, and 1,4-diiodobenzene, 1,6-diiodododecafluorohexane, and 1,8-diiodohexadecafluorooctane were obtained. For the first time, the change in the ¹⁵ N SSNMR chemical shifts upon XB formation is shown to experimentally correlate with the normalized distance parameter of the XB. The same overall trend is confirmed by density functional theory (DFT) calculations of the chemical shifts. ¹³ C NQS experiments show a positive, linear correlation between the chemical shifts and the C-I elongation, which is an indirect probe of the strength of the XB. These correlations can be of general utility to estimate the strength of the XB occurring in diverse adducts by using affordable SSNMR analysis.

The Halogen Bond

The halogen bond occurs when there is evidence of a net attractive interaction between an electrophilic region associated with a halogen atom in a molecular entity and a nucleophilic region in another, or the same, molecular entity. In this fairly extensive review, after a brief history of the interaction, we will provide the reader with a snapshot of where the research on the halogen bond is now, and, perhaps, where it is going. The specific advantages brought up by a design based on the use of the halogen bond will be demonstrated in quite different fields spanning from material sciences to biomolecular recognition and drug design.

The role of solid-state nuclear magnetic resonance in crystal engineering

This Highlight article discusses the role of solid-state NMR spectroscopy in crystal engineering with the aid of several examples from the literature.

NMR Investigations of Noncovalent Carbon Tetrel Bonds. Computational Assessment and Initial Experimental Observation

Group IV tetrel elements may act as tetrel bond donors, whereby a region of positive electrostatic potential (σ-hole) interacts with a Lewis base. The results of calculations of NMR parameters are reported for a series of model compounds exhibiting tetrel bonding from a methyl carbon to the oxygen or nitrogen atoms in various functional groups. The (13)C chemical shift (δiso) and the (1c)J((13)C,Y) coupling (Y = (17)O, (15)N) across the tetrel bond are recorded as a function of geometry. The sensitivity of the NMR parameters to the noncovalent interaction is demonstrated via an increase in δiso and in |(1c)J((13)C,Y)| as the tetrel bond shortens. Gauge-including projector-augmented wave density functional theory (DFT) calculations of δiso are reported for crystals that exhibit tetrel bonding in the solid state. Experimental δiso values for solid sarcosine and its tetrel-bonded salts corroborate the computational findings. This work offers new insights into tetrel bonding and facilitates the incorporation of tetrel bonds as restraints in NMR crystallographic structure refinement.

Solid-State NMR at the University of Ottawa

This article describes some highlights of the research which has been carried out in my laboratory at the University of Ottawa over the period covering 2005 to 2014. My research is in the general areas of solid-state NMR, applications of quantum chemistry, and biomolecular NMR. The format will follow that of my 2014 Canadian Society for Chemistry Keith Laidler Award presentation given in Vancouver in June 2014 at the 97th Canadian Chemistry Conference and Exhibition. Following a brief introduction, I will present some of our most interesting and exciting recent advances according to the following six themes: 1. Fundamental solid-state NMR. 2. Materials characterization and NMR crystallography. 3. Pharmaceuticals and polymorphism. 4. Non-covalent interactions: Halogen bonds. 5. Biomolecular NMR. 6. Software development.

Supramolecular halogen bond passivation of organic-inorganic halide perovskite solar cells

Organic-inorganic halide perovskites, such as CH3NH3PbX3 (X = I(-), Br(-), Cl(-)), are attracting growing interest to prepare low-cost solar cells that are capable of converting sunlight to electricity at the highest efficiencies. Despite negligible effort on enhancing materials' purity or passivation of surfaces, high efficiencies have already been achieved. Here, we show that trap states at the perovskite surface generate charge accumulation and consequent recombination losses in working solar cells. We identify that undercoordinated iodine ions within the perovskite structure are responsible and make use of supramolecular halogen bond complexation to successfully passivate these sites. Following this strategy, we demonstrate solar cells with maximum power conversion efficiency of 15.7% and stable power output over 15% under constant 0.81 V forward bias in simulated full sunlight. The surface passivation introduces an important direction for future progress in perovskite solar cells.

Probing halogen bonds with solid-state NMR spectroscopy: observation and interpretation of J(77Se,31P) coupling in halogen-bonded PSe⋯I motifs

Intra-halogen bond J couplings measured via NMR spectroscopy and interpreted using natural localized molecular orbitals offer novel insights into this class of non-covalent interaction.

Investigation of hydrogen bonding patterns in a series of multi-component molecular solids formed by tetrabromoterephthalic acid with selected N-heterocycles

Hydrogen bonding patterns in a series of multi-component molecules constructed by tetrabromoterephthalic acid with N-heterocycles are discussed in this study.