Visual Recognition of Volatile Organic Compounds by Photonic Nose Integrated with Multiple Metal-Organic Frameworks

The photonic nose inspired by the olfactory system is an integrated detection platform constructed by multiple sensing units as channels. However, in the detection of volatile organic compounds (VOCs), the sensing results that cannot be directly readable and the poor ability to distinguish analytes with similar chemical properties are the main challenges faced by this sensor. Here, 8 metal-organic frameworks (MOF)-based photonic crystals are used as the basic sensing units to construct a photonic nose detection platform. The microscopic adsorption of VOCs by MOFs enables the photonic crystals (PCs) to produce macroscopic structural color output, and further makes the photonic nose have specific color fingerprints for different VOCs, the response time of all PCs to VOCs can be within 1 s. Through the color fingerprint, the visual identification of VOCs produced by 5 common solvent vapors is realized, and 9 VOCs with similar chemical properties are further distinguished. In addition, the application potential of the photonic nose in the actual environment is verified by identifying different contents of benzene in the paint. It is envisaged that the MOF-based photonic nose has great reference value for the development of intelligent and multi-component synergistic functional gas sensors.

Properties and release behavior of sodium alginate-based nanocomposite active films: Effects of particle size of IRMOF-3

Nanoparticles are used as fillers to improve the properties of biopolymers, and their particle size is an important parameter. This work aims to investigate the effect of particle size of isoreticular metal-organic framework-3 (IRMOF-3) on the mechanical, physical, and release properties of sodium alginate (SA)-based composite active film. In our study, IRMOF-3 with six different particle sizes was synthesized by introducing additives. IRMOF-3 loading with carvacrol (IRMOF-3/CA nanoparticles) was incorporated into the SA matrix to prepare the composite film. The characterization and testing results of films showed that the particle size of nanoparticles affected the physical morphology and chemical structure of the film. Especially smaller nanoparticles uniformly dispersed into the SA matrix more easily, forming a denser and more stable spatial network structure with SA, which could more significantly improve the tensile strength, water vapor barrier, and hydrophobic properties of the film (P < 0.05). In addition, the CA release rate from the active film could be significantly reduced by about 33.90 % even when the smallest particle size of the IRMOF-3/CA nanoparticles was added. Therefore, when IRMOF-3/CA is used as the nano-filler to develop SA-based active film, its particle size has a potential influence on the properties of the film.

In situ growth of Bi-MOF on cotton fabrics via ultrasonic synthesis strategy for recyclable photocatalytic textiles

Bismuth-based metal-organic framework (Bi-MOF) materials have shown potential for treating organic pollutants. In this work, multifunctional textiles were produced by in situ synthesis of CAU-17 on carboxymethylated cotton fabrics by solvothermal and ultrasonic strategies and employed as recyclable photocatalysts. The compositional and structural features of the dense MOF crystal coatings on cotton fibers were confirmed by scanning electron microscopy, X-ray diffraction, and other characterization approaches. Under optimized conditions, the developed functionalized cotton fabrics achieved a photodegradation efficiency of 98.8% under visible light for RhB in water, as well as good recyclability. The described results have provided the basis and reference for the fabrication of MOF-functionalized textiles.

Rational Design of a Necklace-like ZIF-67/Poly(vinylidene fluoride) Electrospun Nanofiber Hybrid Membrane for Simultaneous Removal of PM0.3 and SO2

Growing concerns over poor air quality, especially in urban and industrial regions, have led to increased global demands for advanced air-purification technologies. However, the stability and airborne pollutant control abilities of the available air-purification materials under diverse environmental conditions are limited. Thus, the advanced development of filtration materials that can effectively control different types of pollutants, such as particulate matter (PM) and gaseous pollutants, simultaneously has attracted attention. The zeolitic imidazolate framework (ZIF), a type of porous metal-organic framework (MOF), is a promising material for capturing weakly acidic toxic gases such as SO2 owing to its excellent adsorption performance and high thermal and chemical stability. In this study, we successfully developed an ultrastable necklace-like multifunctional hybrid membrane via the cetyltrimethylammonium bromide-assisted in situ growth of zeolitic imidazolate framework (ZIF)-67 crystals on electrospun Co2+-doped poly(vinylidene fluoride) nanofibers (70 nm) that can be used in different moisture environments to achieve sustainable air-filtration performance. The hybrid nanocomposite membrane demonstrated excellent performance for the simultaneous control of intractable fine PM0.3 (filtration efficiency, 99.461%) and SO2 (adsorption capacity, 1476.5 mg g-1) under different humidity conditions. This study contributes to the optimal synergistic integration of the advanced metal-organic framework (MOF)-nanofiber nanocomposite membranes and can guide the rational design and conceptualization of a facile and novel membrane for various applications in the environmental science and energy fields.

A highly efficient synthetic strategy for de novo NP encapsulation into metal-organic frameworks: enabling further modulated control of catalytic properties

De novo encapsulation is a prevalent method to prepare composite materials where the structure-tunable metal nanoparticles (NPs) are holistically coated with metal-organic frameworks (MOFs). This method has been demonstrated to have promise in various fields but the extensive application of this approach is still challenging. This study proposed, for the first time, leveraging a specific surface-energy-dominated (SED) mechanism to achieve a highly efficient synthetic strategy for de novo NP encapsulation. The generality of this strategy is proved in applying to various MOFs, reaction conditions and the use of capping agents. By applying the strategy, Pd NPs with different morphologies are encapsulated in UiO-67, which is prone to self-assembly without coating, and an interesting enhancement is investigated in the selective semihydrogenation of alkynes on different Pd surfaces. These results demonstrate that the control of surface energy is a feasible method for efficient NP encapsulation which sheds light on the rational design of MOF-based composites for future applications.

Grain Boundary-Rich Copper Nanocatalysts Generated from Metal-Organic Framework Nanoparticles for CO2 -to-C2+ Electroconversion

Due to severe contemporary energy issues, generating C₂₊ products from electrochemical carbon dioxide reduction reactions (eCO₂ RRs) gains much interest. It is known that the catalyst morphology and active surface structures are critical for product distributions and current densities. Herein, a synthetic protocol of nanoparticle morphology on copper metal-organic frameworks (n-Cu MOFs) is developed by adjusting growth kinetics with termination ligands. Nanoscale copper oxide aggregates composed of small particulates are yielded via calcining the Cu-MOF nanoparticles at a specific temperature. The resulting nanosized MOF-derived catalyst (n-MDC) exhibits Faradaic efficiencies toward ethylene and C₂₊ products of 63% and 81% at -1.01 V versus reversible hydrogen electrode (RHE) in neutral electrolytes. The catalyst also shows prolonged stability for up to 10 h. A partial current density toward C₂₊ products is significantly boosted to -255 mA cm^-2 in an alkaline flow cell system. Comprehensive analyses reveal that the nanoparticle morphology of pristine Cu MOFs induces homogeneous decomposition of organic frameworks at a lower calcination temperature. It leads to evolving grain boundaries in a high density and preventing severe agglomeration of copper domains, the primary factors for improving eCO₂ RR activity toward C₂₊ production.

Metal-Organic Framework-Based Colloidal Particle Synthesis, Assembly, and Application

Metal-organic frameworks (MOFs) assembled from metal nodes and organic ligands have received significant attention over the past two decades for their fascinating porous properties and broad applications. Colloidal MOFs (CMOFs) not only inherit the intrinsic properties of MOFs, but can also serve as building blocks for self-assembly to make functional materials. Compared to bulk MOFs, the colloidal size of CMOFs facilitates further manipulation of CMOF particles in a single or collective state in a liquid medium. The resulting crystalline order obtained by self-assembly in position and orientation can effectively improve performance. In this review, we summarize the latest developments of CMOFs in synthesis strategies, self-assembly methods, and related applications. Finally, we discuss future challenges and opportunities of CMOFs in synthesis and assembly, by which we hope that CMOFs can be further developed into new areas for a wider range of applications.

A systematic study of a polymer-assisted carboxylate-based MOF synthesis: multiple roles of core cross-linked PMAA-b-PMMA nanoparticles

Colloidaly stable carboxylate-based metal organic frameworks (MOFs), grown from acid decorated nanoparticles synthesized via PISA.

Water-Dispersible Carboxymethyl Dextran-Coated Melamine Nanoparticles for Biosensing Applications

In this study, we developed a simple method for preparing highly dispersed, stable, and streptavidin (SA)-functionalized carboxymethyl dextran (CMD)-coated melamine nanoparticles (MNPs) in an aqueous buffer at neutral pH. Dynamic light scattering (DLS) revealed the agglomeration of MNPs in an aqueous buffer at neutral pH. When CMD, N-hydroxysuccinimide (NHS), and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) were simultaneously mixed with the MNPs, CMD was bound to the MNPs, promoting their dispersibility. Preparation of SA-CMD-MNPs was accomplished simply by adding SA solution to the CMD-MNPs. The amount of SA bound to the CMD-MNPs was quantified by the bicinchoninic assay, and the amount of SA molecules bound to each CMD-MNP was 417 ± 4. SA-CMD-MNPs exhibited high dispersity (polydispersity index = 0.058) in a neutral phosphate buffer and maintained it for 182 days with dispersion using a probe sonicator (5 s) before DLS characterization. The performance of the SA-CMD-MNPs in biosensing was evaluated by immunohistochemistry, which revealed that the nanoparticles could specifically stain MCF-7 cells derived from breast cancer cells with low HER2 expression. This study provides an effective method for synthesizing highly dispersible nanoparticles for biosensing.

Size-Dependent Properties of Solution-Processable Conductive MOF Nanocrystals

The diverse optical, magnetic, and electronic behaviors of most colloidal semiconductor nanocrystals emerge from materials with limited structural and elemental compositions. Conductive metal-organic frameworks (MOFs) possess rich compositions with complex architectures but remain unexplored as nanocrystals, hindering their incorporation into scalable devices. Here, we report the controllable synthesis of conductive MOF nanoparticles based on Fe(1,2,3-triazolate)₂. Sizes can be tuned to as small as 5.5 nm, ensuring indefinite colloidal stability. These solution-processable MOFs can be analyzed by solution-state spectroscopy and electrochemistry and cast into conductive thin films with excellent uniformity. This unprecedented analysis of MOF materials reveals a strong size dependence in optical and electronic behaviors sensitive to the intrinsic porosity and guest-host interactions of MOFs. These results provide a radical departure from typical MOF characterization, enabling insights into physical properties otherwise impossible with bulk analogues while offering a roadmap for the future of MOF nanoparticle synthesis and device fabrication.

Pore engineering of biomolecule-based metal–organic framework nanocarriers for improving loading and release of paclitaxel

There has been growing interest in employing metal–organic frameworks (MOFs) incorporated with biomolecules, known as b-MOFs, in biomedical applications.

Enhanced water-resistant performance of Cu-BTC through polyvinylpyrrolidone protection and its capture ability evaluation of methylene blue

Water instability issues greatly restrict the application of Cu-BTC for cationic dye (e.g. methylene blue (MB)) capture from wastewater.

Introducing Postmetalation Metal-Organic Framework to Control Perovskite Crystal Growth for Efficient Perovskite Solar Cells

A novel lead-containing metal-organic framework (Pb-MOF) is synthesized through postmetalation of MOF-525. Postmetalation renders lead ions bound with the organic linker of MOF-525, which can serve as nucleation points to promote perovskite crystallization. The introduction of lead postmetalated MOF-525 (Pb-MOF) as a scaffold layer between compact TiO₂ (c-TiO₂) layer and perovskite layer promotes perovskite crystal growth in enlarging crystal grain size with better crystallinity, hence decreasing defect sites in the perovskite layer. Postmetalation of MOF-525 with lead ions allows MAPbI₃ to form a solid crystal structure to facilitate the charge separation between electron transport layer (ETL) and light-harvesting layer so as to resolve the issue of possible vacancies present in MOFs. As a result, the champion perovskite solar cell (PSC) with the introduction of Pb-MOF exhibits a power conversion efficiency (PCE) of 20.87% and better stability (86% PCE retention after 40 days), outperforming the pristine PSC (16.85% PCE, with 52% retention after 40 days) and MOF-525-introduced PSC (18.61% PCE, with 76% retention after 40 days).

When metal-organic framework mediated smart drug delivery meets gastrointestinal cancers

Cancers of the gastrointestinal tract constitute one of the most common cancer types worldwide and a ∼58% increase in the global number of cases has been estimated by IARC for the next twenty years. Recent advances in drug delivery technologies have attracted scientific interest for developing and utilizing efficient therapeutic systems. The present review focuses on the use of nanoscale MOFs (Nano-MOFs) as carriers for drug delivery and imaging purposes. In pursuit of significant improvements to current gastrointestinal cancer chemotherapy regimens, systems that allow multiple concomitant therapeutic options (polytherapy) and controlled release are highly desirable. In this sense, MOF-based nanotherapeutics represent a significant step towards achieving this goal. Here, the current state-of-the-art of interdisciplinary research and novel developments into MOF-based gastrointestinal cancer therapy are highlighted and reviewed.

Chiral Detection with Coordination Polymers

Coordination polymers and metal-organic frameworks are prime candidates for general chemical sensing, but the use of these porous materials as chiral probes is still an emerging field. In the last decade, they have found application in a range of chiral analysis methods, including liquid- and gas-phase chromatography, circular dichroism spectroscopy, fluorescence sensing, and NMR spectroscopy. In this minireview, we examine recent works on coordination polymers as chiral sensors and their enantioselective host-guest chemistry, while highlighting their potential for application in different settings.

Solvent-assisted synthesis of dendritic cerium hexacyanocobaltate and derived porous dendritic Co3O4/CeO2 as supercapacitor electrode materials

Here, we report a solvent-mediated synthetic route for preparing cerium hexacyanocobaltate with a dendritic shape. The porous dendritic Co₃O₄/CeO₂ was prepared after annealing at 500 °C, served as a supercapacitor electrode.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

Impact of the Preparation Procedure on the Performance of the Microporous HKUST-1 Metal-Organic Framework in the Liquid-Phase Separation of Aromatic Compounds

To date, metal-organic frameworks (MOFs) have been recognized as promising solid phases in high-performance liquid chromatography (HPLC). This research aimed to elucidate the role of the physico-chemical characteristics of the microporous HKUST-1 metal-organic framework in its operation as a selective adsorbent in HPLC. For this, the HKUST-1 samples were prepared by microwave-assisted synthesis and a solvothermal procedure. According to the chromatographic examinations, the HKUST-1 material synthesized in the microwave fields shows an efficient performance in the selective adsorption of aromatic compounds with different functionalities. This study revealed a significant impact of the preparation procedure on the mechanism of the liquid-phase adsorption on the HKUST adsorbents under conditions of the HPLC. An effect of the elution solvent with the different coordination ability to the Cu²⁺ sites in the HKUST-1 structure on the adsorption selectivity was observed.

Assessing Crystallisation Kinetics of Zr Metal-Organic Frameworks through Turbidity Measurements to Inform Rapid Microwave-Assisted Synthesis

Controlling the crystallisation of metal-organic frameworks (MOFs), network solids of metal ions or clusters connected by organic ligands, is often hindered by the significant number of synthetic variables inherent to their synthesis. Coordination modulation, the addition of monotopic competing ligands to solvothermal syntheses, can allow tuning of physical properties (particle size, porosity, surface chemistry), enhance crystallinity, and select desired phases, by modifying the kinetics of self-assembly, but its mechanism(s) are poorly understood. Herein, turbidity measurements were used to assess the effects of modulation on the solvothermal synthesis of the prototypical Zr terephthalate MOF UiO-66 and the knowledge gained was applied to its rapid microwave synthesis. The studied experimental parameters-temperature, reagent concentration, reagent aging, metal precursor, water content, and modulator addition-all influence the time taken for onset of nucleation, and subsequently allow microwave synthesis of UiO-66 in as little as one minute. The simple, low cost turbidity measurements align closely with previously reported in situ synchrotron X-ray diffraction studies, proving their simplicity and utility for probing the nucleation of complex materials while offering significant insights to the synthetic chemist.

3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal

Three-dimensional (3D) printing technique has received exceptional global attention as it can create a myriad of high-resolution architectures from digital models. In the present study, 3D-printed metal-organic frameworks (MOFs) were shaped into several geometries via direct ink writing, which overcomes the instability and high-pressure drop of powdery MOF during the flow of gas or liquid streams. The inclusion of a blend of calcium alginate and gelatin (CA-GE) as biocompatible binder allowed for easy writing and an enhanced mechanical property. Besides, it was found that the printing geometry (square, hexagon, and circle), MOF loading amount, and MOF size also greatly influenced the adsorptive performance. For instance, the methylene blue adsorption efficiency of CA-GE scaffolds without MOF was only 43.6%, while the printed MOF/CA-GE sample exhibited 99.8% adsorption efficiency at 20 min. Both the inherent microporous structure of MOFs and meso/macroporous structures of the 3D matrix contributed to the excellent adsorption properties towards a variety of organic dyes and their mixtures. Furthermore, the 3D-printed adsorbents can be easily regenerated in dilute acid solution and reused for at least 7 times without performance loss. In contrast, the powdery MOF can only be repeatedly used for at most 2 times.

HKUST-1-Supported Cerium Catalysts for CO Oxidation

The synthesis method of metal–organic frameworks (MOFs) has an important impact on their properties, including their performance in catalytic reactions. In this work we report on how the performance of [Cu3(TMA)2(H2O)3]n (HKUST-1) and Ce@HKUST-1 in the reaction of CO oxidation depends on the synthesis method of HKUST-1 and the way the cerium active phase is introduced to it. The HKUST-1 is synthesised in two ways: via the conventional solvothermal method and in the presence of a cationic surfactant (hexadecyltrimethylammonium bromide (CTAB)). Obtained MOFs are used as supports for cerium oxide, which is deposited on their surfaces by applying wet and incipient wetness impregnation methods. To determine textural properties, structure, morphology, and thermal stability, the HKUST-1 supports and Ce@HKUST-1 catalysts are characterised using X-ray diffraction (XRD), N2 sorption, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). It is proven that the synthesis method of HKUST-1 has a significant impact on its morphology, surface area, and thermal stability. The synthesis method also influences the dispersion and the morphology of the deposited cerium oxide. Last but not least, the synthesis method affects the catalytic activity of the obtained material.

Size control over metal-organic framework porous nanocrystals

Porous nanocrystals of metal-organic frameworks (MOFs) offer greater bioavailability, higher surface-to-volume ratios, superior control over MOF membrane fabrication, and enhanced guest-sorption kinetics compared to analogous bulk phases, but reliable synthesis of uniformly sized particles remains an outstanding challenge. Here, we identify the smallest and most probable sizes of known MOF nanocrystals and present an exhaustive comparative summary of nano- versus bulk-MOF syntheses. Based on critical analysis of reported size data and experimental conditions, an alternate to the LaMer model is proposed that describes nanocrystal formation as a kinetic competition between acid-base and metal-ligand reactivity. Particle growth terminates when ligands outcompete metal-ion diffusion, thereby arresting polymerization to produce kinetically trapped particle sizes. This model reconciles disparate trends in the literature and postulates that minimum particle sizes can be achieved by minimizing the relative ratios of metal-to-linker local concentrations. By identifying conditions that disfavor small nanocrystal sizes, this model also provides routes towards macroscopic MOF single crystals. A universal "seesaw" relationship between nanocrystal sizes and the concentrations of acidic surface-capping ligands provides a roadmap for achieving precise synthetic control. Best practices in synthesis, characterization, and data presentation are recommended for future investigations so that MOF nanocrystals may achieve their full potential as advanced nanomaterials.

Spherical Sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) Core-Shell Catalysts: Zr-Based Metal-Organic Frameworks for Effectively Regulating the Reverse Water-Gas Shift Reaction

In this study, spherical sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) core-shell catalysts were assembled. Au nanoparticles (NPs) were used as the core for the epitaxial growth of Pd shells, and Au@Pd core-shell NPs were successfully encapsulated in the center of monodispersed Au@Pd@UIO-67 nanospheres. Pt NPs were fully fixed onto the nanosphere surfaces to obtain Au@Pd@UIO-67/Pt composites; further coating with UIO- n led to Au@Pd@UIO-67/Pt@UIO- n, in which Pt NPs are sandwiched between the Au@Pd@UIO-67 core and the UIO- n shell. The Au@Pd core-shell NPs efficiently controlled the morphology and structure of UIO-67 and enhanced the CO selectivity of the catalyst. Pt NPs increased the CO₂ conversion, and the UIO- n component effectively regulated the reverse water-gas shift reaction.

Colloid-assisted growth of metal–organic framework nanoparticles

A new colloid-assisted approach is introduced to synthesize metal–organic framework (MOF) nanoparticles.

Polyacids as Modulators for the Synthesis of UiO-66

Poly(acrylic acid) (PAA) and poly(vinylbenzoic acid) (PBA) were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization and used as modulators for the synthesis of the metal–organic framework (MOF) UiO-66 (UiO=University of Oslo). Whereas typical syntheses of UiO-66 require large excesses of acid modulators, such as acetic acid or benzoic acid, to achieve controlled particle size and morphology of the resulting MOF particles, the use of polymerized acids allows for narrow particle size distributions at sub-stoichiometric quantities of modulator. We show using scanning electron microscopy and dynamic light scattering techniques that polyacids can act as alternative modulators for the growth of UiO-66.

Synthesis of catalytically active bimetallic nanoparticles within solution-processable metal–organic-framework scaffolds

Bimetallic alloy nanoparticles are synthesized by in situ reduction of mixed metal ions inside CD-MOFs.

Comparison of Fabrication Methods of Metal-Organic Framework Optical Thin Films

Homogeneous metal-organic frameworks (MOFs)-based optical thin films have attracted increasing attention, since they can potentially be used as active components in optical/opt-electrical devices, and how to fabricate MOF thin films with high quality is the premise of practically using them. Herein, five fabrication methods of MOF films are systematically investigated and compared from the aspects of appearance, reflectivity, micro-morphology, surface roughness, and optical properties of the films. The famous robust Zr-based MOF, UiO-66 (UiO = University of Oslo) is chosen as a model, and the five methods are spin-coating, dip-coating, self-assembly, direct growth, and the stepwise layer by layer growth method. This study provides fundamental support for the application of MOFs in the optical field.

Monodisperse Metal-Organic Framework Nanospheres with Encapsulated Core-Shell Nanoparticles Pt/Au@Pd@{Co2(oba)4(3-bpdh)2}4H2O for the Highly Selective Conversion of CO2 to CO

A new microporous metal-organic framework (MOF) with formula {Co₂(oba)₄(3-bpdh)₂}4H₂O [oba = 4,4'-oxybis(benzoic acid); 3-bpdh = N, N'-bis-(1-pyridine-3-yl-ethylidene)-hydrazine] was assembled, and its morphology was found to undergo a microrod-to-nanosphere transformation with temperature variation. Core-shell Au@Pd functional nanoparticles (NPs) were successfully encapsulated in the center of the monodisperse nanospheres, and Pt NPs were well-dispersed and fully immobilized on the surface of Au@Pd@1Co to build the Pt/Au@Pd@1Co composites, which exhibited NPs catalytic activity for the reverse water gas shift reaction. The core-shell Au@Pd NPs in MOF significantly enchanced the CO selectivity of the catalyst, and the Pt NP loading on the surface of the nanosphere afforded a desirable CO₂ conversion.

MOF–aminoclay composites for superior CO2 capture, separation and enhanced catalytic activity in chemical fixation of CO2

A novel composite with ultra-small (2–3 nm) MOF nanoparticles stabilized on an aminoclay template shows high CO₂ capture, separation and chemical fixation efficacy.

Microwave assisted non-solvothermal synthesis of metal–organic frameworks

Microwave-assisted non-solvothermal synthesis of HKUST-1.

Enzyme encapsulation in zeolitic imidazolate frameworks: a comparison between controlled co-precipitation and biomimetic mineralisation

Recent studies have demonstrated that metal–organic frameworks can be employed as protective coatings for enzymes.

Improved adsorption properties of granulated copper hexacyanoferrate with multi-scale porous networks

Designed porous copper hexacyanoferrate micro-capsule beads (CuHCF-MCB) were prepared using freeze-drying (FD).

Multifunctional Supramolecular Hybrid Materials Constructed from Hierarchical Self-Ordering of In Situ Generated Metal-Organic Framework (MOF) Nanoparticles

A synergistic approach is described to engineer supramolecular hybrid materials based on metal-organic frameworks, encompassing HKUST-1 nanoparticles formed in situ, coexisting with an electrically conducting gel fiber network. The following findings are made: i) multistimuli-responsive structural transformation via reversible sol-gel switching and ii) radical conversion of a soft hybrid gel into a mechanically malleable, viscoelastic matter.

Effect of various alkaline agents on the size and morphology of nano-sized HKUST-1 for CO2 adsorption

Two type of modulators, including sodium acetate and triethylamine were used to synthesize nanosized HKUST-1 crystals with tailored size and morphology using a coordination modulation method.

Shape and size controlled synthesis of MOF nanocrystals with the assistance of ionic liquid mircoemulsions

In this work, the La-metal-organic frameworks (La-MOFs) were synthesized using lanthanum(III) nitrate and 1,3,5-benzenetricarboxylic acid (BTC) in H2O-in-1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6), bmimPF6-in-water, and the bicontinuous microemulsions stabilized by surfactant TX-100. The MOFs prepared were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and FT-IR methods, and the microstructures of the microemulsions in the H2O/bmimPF6/TX-100 system were studied by small-angle X-ray scattering (SXAS) technique. It was shown that the dispersed droplets in the water-in-bmimPF6, bicontinuous and bmimPF6-in-water microemulsions were spherical, lamellar, and cylindrical, respectively. The shapes of the La-MOFs synthesized were similar to that of the droplets in the corresponding microemulsions. This indicated that the morphology of MOFs could be controlled by the microstructures of the microemulsions. On the basis of the systematic experimental results, the mechanism for controlling the morphology of the MOFs was proposed.