Enhanced photocatalytic performance of SnS2 under visible light irradiation: strategies and future perspectives

Tin(II) sulfide (SnS2) has emerged as a promising candidate for visible light photocatalytic materials. As a member of the transition metal dichalcogenides (TMDs) family, SnS2 features a band gap of approximately 2.20 eV and a layered structure, rendering it suitable for visible light activation with a high specific surface area. However, the application of SnS2 as a visible light photocatalyst still requires improvement, particularly in addressing the high recombination of electrons and holes, as well as the poor selectivity inherent in its perfect crystal structure. Therefore, ongoing research focuses on strategies to enhance the photocatalytic performance of SnS2. In this comprehensive review, we analyze recent advances and promising strategies for improving the photocatalytic performance of SnS2. Various successful approaches have been reported, including controlling the reactive facets of SnS2, inducing defects in the crystal structure, manipulating morphologies, depositing noble metals, and forming heterostructures. We provide a detailed understanding of these phenomena and the preparation techniques involved, as well as future considerations for exploring new science in SnS2 photocatalysis and optimizing performance.

Aloe vera-derived graphene-coupled phenosafranin photocatalyst for generation and regeneration of ammonia and NADH by mimicking natural photosynthetic route

Aloe vera-derived graphene (ADG) coupled system photocatalyst, mimicking natural photosynthesis, is one of the most promising ways for converting solar energy into ammonia (NH3 ) and nicotinamide adenine dinucleotide (NADH) that have been widely used to make the numerous chemicals such as fertilizer and fuel. In this study, we report the synthesis of the aloe vera-derived graphene-coupled phenosafranin (ADGCP) acting as a highly efficient photocatalyst for the generation of NH3 and regeneration of NADH from nitrogen (N2 ) and oxidized form of nicotinamide adenine dinucleotide (NAD+ ). The results show a benchmark instance for mimicking natural photosynthesis activity as well as the practical applications for the solar-driven selective formation of NH3 and the regeneration of NADH by using the newly designed photocatalyst.

Environmental remediation of hazardous pollutants using MXene-perovskite-based photocatalysts: A review

Photocatalysis utilizing semiconductors offer a cost-effective and promising solution for the removal of pollutants. MXene and perovskites, which possess desirable properties such as a suitable bandgap, stability, and affordability, have emerged as a highly promising material for photocatalytic activity. However, the efficiency of MXene and perovskites is limited by their fast recombination rates and inadequate light harvesting abilities. Nonetheless, several additional modifications have been shown to enhance their performance, thereby warranting further exploration. This study delves into the fundamental principles of reactive species for MXene-perovskites. Various methods of modification of MXene-perovskite-based photocatalysts, including Schottky junction, Z-scheme and S-scheme are analyzed with regard to their operation, differences, identification techniques and reusability. The assemblance of heterojunctions is demonstrated to enhance photocatalytic activity while also suppressing charge carrier recombination. Furthermore, the separation of photocatalysts through magnetic-based methods is also investigated. Consequently, MXene-perovskite-based photocatalysts are seen as an exciting emerging technology that necessitates further research and development.

Balancing Near-Field Enhancement and Hot Carrier Injection: Plasmonic Photocatalysis in Energy-Transfer Cascade Assemblies

Photocatalysis stands as a very promising alternative to photovoltaics in exploiting solar energy and storing it in chemical products through a single-step process. A central obstacle to its broad implementation is its low conversion efficiency, motivating research in different fields to bring about a breakthrough in this technology. Using plasmonic materials to photosensitize traditional semiconductor photocatalysts is a popular strategy whose full potential is yet to be fully exploited. In this work, we use CdS quantum dots as a bridge system, reaping energy from Au nanostructures and delivering it to TiO2 nanoparticles serving as catalytic centers. The quantum dots can do this by becoming an intermediate step in a charge-transfer cascade initiated in the plasmonic system or by creating an electron-hole pair at an improved rate due to their interaction with the enhanced near-field created by the plasmonic nanoparticles. Our results show a significant acceleration in the reaction upon combining these elements in hybrid colloidal photocatalysts that promote the role of the near-field enhancement effect, and we show how to engineer complexes exploiting this approach. In doing so, we also explore the complex interplay between the different mechanisms involved in the photocatalytic process, highlighting the importance of the Au nanoparticles' morphology in their photosensitizing capabilities.

CdTiO3-NPs incorporated TiO2 nanostructure photocatalyst for scavenger-free water splitting under visible radiation

Nanofibrous morphology and the doping technique can overcome the problem of electron/hole fast recombination and improve the activity of titanium oxide-based photocatalysts. In this study, nanoparticulate and nanofibrous forms of CdTiO3-incorporated TiO2 were synthesized with different cadmium contents; the morphology and composition were determined by SEM, TEM, EDX, and XRD techniques. The nanomorphology, cadmium content, and reaction temperature of Cd-doped TiO2 nanostructures were found to be strongly affect the hydrogen production rate. Nanofibrous morphology improves the rate of hydrogen evolution by around 10 folds over the rate for nanoparticles due to electron confinement in 0D nanostructures. The average rates of hydrogen production for samples of 0.5 wt.% Cd are 0.7 and 16.5 ml/gcat.min for nanoparticles and nanofibers, respectively. On the other hand, cadmium doping resulted in increasing the hydrogen production rate from 9.6 to 19.7 ml/gcat.min for pristine and Cd-doped (2 wt%) TiO2 nanofibers, respectively. May be the formation of type I heterostructures between the TiO2 matrix and CdTiO3 nanoparticles is the main reason for the observed enhancement of photocatalytic activity due to the strong suppressing of electron/holes recombination process. Consequently, the proposed photocatalyst could be exploited to produce hydrogen from scavenger-free solution. Varying reaction temperature suggests that hydrogen evolution over the proposed catalyst is incompatible with the Arrhenius equation. In particular, reaction temperature was found to have a negative influence on photocatalytic activity. This work shows the prospects for using CdTiO3 as a co-catalyst in photon-induced water splitting and indicates a substantial enhancement in the rate of hydrogen production upon using the proposed photocatalyst in nanofibrous morphology.

Altered zirconium dioxide based photocatalyst for enhancement of organic pollutants degradation: A review

Heterogeneous advanced oxidation processes are a promising approach for cost-efficient removal of pollutants using semiconductors. Zirconium dioxide (ZrO₂) is an auspicious material for photocatalytic activity owning to its suitable bandgap, stability, and low cost. However, ZrO₂ suffers from fast recombination rate, and poor light harvesting ability. Nonetheless, extra modification has also shown improvements and therefore is worth investigating. The endeavour of this paper initially discusses the fundamentals with respect to reactive species, classification, and synthesis methods for ZrO₂. Furthermore, with particular consideration to stability and reusability, several additional modification approaches for ZrO₂-based photocatalysts such as doping and noble metals loading. Furthermore, the formation of heterojunctions has also been shown to boost photocatalytic activity while inhibiting charge carrier recombination. Finally, photocatalyst separation via magnetic-based photocatalysts are elucidated. As a result, ZrO₂-based photocatalysts are regarded as a promising emerging technology that warrants further development and research.

Bioactive Coatings Based on Nanostructured TiO2 Modified with Noble Metal Nanoparticles and Lysozyme for Ti Dental Implants

This work presents the synthesis of nanostructured TiO₂ modified with noble metal nanoparticles (Au, Ag) and lysozyme and coated on titanium foil. Moreover, the specific structural and functional properties of the resulting inorganic and hybrid materials were explored. The purpose of this study was to identify the key parameters for developing engineered coatings on titanium foil appropriate for efficient dental implants with intrinsic antibacterial activity. TiO₂ nanoparticles obtained using the sol-gel method were deposited on Ti foil and modified with Au/Ag nanoparticles. Morphological and structural investigations (scanning electron and atomic force microscopies, X-ray diffraction, photoluminescence, and UV-Vis spectroscopies) were carried out for the characterization of the resulting inorganic coatings. In order to modify their antibacterial activity, which is essential for safe dental implants, the following aspects were investigated: (a) singlet oxygen (¹O₂) generation by inorganic coatings exposed to visible light irradiation; (b) the antibacterial behavior emphasized by titania-based coatings deposited on titanium foil (TiO₂/Ti foil; Au-TiO₂/Ti foil, Ag-TiO₂/Ti foil); (c) the lysozyme bioactivity on the microbial substrate (Micrococcus lysodeicticus) after its adsorption on inorganic surfaces (Lys/TiO₂/Ti foil; Lys/Au-TiO₂/Ti foil, Lys/Ag-TiO₂/Ti foil); (d) the enzymatic activity of the above-mentioned hybrids materials for the hydrolysis reaction of a synthetic organic substrate usually used for monitoring the lysozyme biocatalytic activity, namely, 4-Methylumbelliferyl β-D-N,N',N″-triacetylchitotrioside [4-MU-β- (GlcNAc)₃]. This was evaluated by identifying the presence of a fluorescent reaction product, 7-hydroxy-4-metyl coumarin (4-methylumbelliferone).

Noble Metals Deposited LaMnO3 Nanocomposites for Photocatalytic H2 Production

Due to the growing demand for hydrogen, the photocatalytic hydrogen production from alcohols present an intriguing prospect as a potential source of low-cost renewable energy. The noble metals (Ag, Au, Pd and Pt) deposited LaMnO₃ nanocomposites were synthesized by a non-conventional green bio-reduction method using aqueous lemon peel extract, which acts as both reducing and capping agent. The successful deposition of the noble metals on the surface of LaMnO₃ was verified by using powder XRD, FTIR, TEM, N₂-physisorption, DR UV-vis spectroscopy, and XPS techniques. The photocatalytic activity of the synthesized nanocomposites was tested for photocatalytic H₂ production under visible light irradiation. Different photocatalytic reaction parameters such as reaction time, pH, catalyst mass and reaction temperature were investigated to optimize the reaction conditions for synthesized nanocomposites. Among the synthesized noble metal deposited LaMnO₃ nanocomposites, the Pt-LaMnO₃ nanocomposite offered superior activity for H₂ production. The enhanced photocatalytic activity of the Pt-LaMnO₃ was found as a result from low bandgap energy, high photoelectrons generation and enhanced charge separation due to deposition of Pt nanoparticles. The effective noble metal deposition delivers a new route for the development of plasmonic noble metal-LaMnO₃ nanocomposites for photocatalytic reforming of aqueous methanol to hydrogen.

Single-Atom-Based Catalysts for Photocatalytic Water Splitting on TiO2 Nanostructures

H2 generation from photocatalytic water splitting is one of the most promising approaches to producing cost-effective and sustainable fuel. Nanostructured TiO2 is a highly stable and efficient semiconductor photocatalyst for this purpose. The main drawback of TiO2 as a photocatalyst is the sluggish charge transfer on the surface of TiO2 that can be tackled to a great extent by the use of platinum group materials (PGM) as co-catalysts. However, the scarcity and high cost of the PGMs is one of the issues that prevent the widespread use of TiO2/PGM systems for photocatalytic H2 generation. Single-atom catalysts which are currently the frontline in the catalysis field can be a favorable path to overcome the scarcity and further advance the use of noble metals. More importantly, single-atom (SA) catalysts simultaneously have the advantage of homogenous and heterogeneous catalysts. This mini-review specifically focuses on the single atom decoration of TiO2 nanostructures for photocatalytic water splitting. The latest progress in fabrication, characterization, and application of single-atoms in photocatalytic H2 generation on TiO2 is reviewed.

Synergistic Combination of Charge Carriers and Energy-Transfer Processes in Plasmonic Photocatalysis

Important efforts are currently under way in order to develop further the nascent field of plasmonic photocatalysis, striving for improved efficiencies and selectivities. A significant fraction of such efforts has been focused on distinguishing, understanding, and enhancing specific energy-transfer mechanisms from plasmonic nanostructures to their environment. Herein, we report a synthetic strategy that combines two of the main physical mechanisms driving plasmonic photocatalysis into an engineered system by rationally combining the photochemical features of energetic charge carriers and the electromagnetic field enhancement inherent to the plasmonic excitation. We do so by creating hybrid photocatalysts that integrate multiple plasmonic resonators in a single entity, controlling their joint contribution through spectral separation and differential surface functionalization. This strategy allows us to create complex hybrids with improved photosensitization capabilities, thanks to the synergistic combination of two photosensitization mechanisms. Our results show that the hot electron injection can be combined with an energy-transfer process mediated by the near-field interaction, leading to a significant increase in the final photocatalytic response of the material and moving the field of plasmonic photocatalysis closer to energy-efficient applications. Furthermore, our multimodal hybrids offer a test system to probe the properties of the two targeted mechanisms in energy-related applications such as the photocatalytic generation of hydrogen and open the door to wavelength-selective photocatalysis and novel tandem reactions.

NOx Photooxidation over Different Noble Metals Modified TiO2

We compared the activity enhancement effect of noble metal deposited on TiO2 in photocatalytic nitrogen oxides oxidation. Titanium dioxide was decorated with Ag, Au, Pt or Pd in the sol-gel process. Synthesized catalysts were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller measurement (BET), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDX). All catalysts together with pure TiO2 obtained by sol-gel (SG) technique were tested for their photocatalytic activity towards nitrogen oxide oxidation (high concentrations of 50, 150 and 250 ppm). FTIR spectrometry was used to determine the gas phase composition and identify TiO2 surface species. The Ag0.1 sample turned out to be deactivated within 60 min of UV/Vis irradiation. Photocatalytic oxidation rate towards NO2 turned to be the highest over SG (photocatalyst without metal deposition). NO2 formation was also observed for Au0.1, Au0.5, Pt0.1, Pt0.5 and Pd0.1. The best NOx removal, i.e., conversion to final product HNO3 was obtained with the Au0.5 photocatalyst.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Effect of Heating Rate on the Photocatalytic Activity of Ag–TiO2 Nanocomposites by One-Step Process via Aerosol Routes

Ag–TiO2 nanocomposite films, based of Ag and TiO2 nanoparticles, were fabricated in a one-step aerosol route employing the simultaneous plasma-enhanced chemical vapor deposition and physical vapor deposition systems. The as-fabricated films were subjected to different heating rates (3 to 60 °C/min) with a constant annealing temperature of 600 °C to observe the significant changes in the properties (e.g., nanoparticle size, crystalline size, crystallite phase, surface area) toward the photocatalytic performance. The photocatalytic activity was evaluated by the measurement of the degradation of a methylene blue aqueous solution under UV light irradiation, and the results revealed that it gradually increased with the increase in the heating rate, caused by the increased Brunauer–Emmett–Teller (BET) specific surface area and total pore volume.

Improving SERS Sensing Efficiency and Catalytic Reduction Activity in Multifunctional Ternary Ag-TiO2-GO Nanostructures: Roles of Electron Transfer Process on Performance Enhancement

Multifunctional nanocomposites have received great attention for years; electron transfer (ET) is considered as an explanatory mechanism for enhancement of performance of these nanostructures. The existence of this ET process has been proved in many studies using either experimental or computational approaches. In this study, a ternary nanocomposite system of Ag/TiO2/GO was prepared to evaluate the performance enhancement in two experimental models: a physical model (i.e., surface-enhanced Raman scattering (SERS) sensor) and a chemical one (i.e., catalytic reduction reaction). The metal/semiconductor heterojunction between Ag and TiO2, as well as Ti-O-C bonds, has allowed plasmonic hot electrons to be transferred in the internal structure of the material. An investigation on the role of Ag content on the SERS sensing and catalytic reduction efficiency of Ag/TiO2/GO was performed in both models. Interestingly, they all resulted in the same optimal Ag content of 50 wt%. It was then further discussed to provide a convincing evidence for the plasmon-induced electron transfer phenomena in the Ag/TiO2/GO nanostructure. These findings also suggest a pathway to design and develop high-performance, cost-effective, facile-preparation, and eco-friendly multifunctional nanostructures for detecting and removing contaminants in environment.

In situ X-ray absorption spectroscopic studies of photocatalytic oxidation of As(III) to less toxic As(V) by TiO2 nanotubes

Arsenic in groundwater caused the black-foot disease (BFD) in many countries in the 1950-1960s. It is of great importance to develop a feasible method for removal of arsenic from contaminated groundwater in BFD endemic areas. Photocatalytic oxidation of As(III) to less toxic As(V) is, therefore, of significance for preventing any arsenic-related disease that may occur. By in situ synchrotron X-ray absorption spectroscopy, the formation of As(V) is related to the expense of As(III) disappearance during photocatalysis by TiO₂ nanotubes (TNTs). Under UV/Vis light irradiation, the apparent first-order rate constant for the photocatalytic oxidation of As(III) to As(V) is 0.0148 min^-1. It seems that As(III) can be oxidized with photo-excited holes while the not-recombined electrons may be scavenged with O₂ in the channels of the well defined TNTs (an opening of 7 nm in diameter). In the absence of O₂, on the contrary, As(III) can be reduced to As(0), to some extent. Cu(II) (CuO), as an electron acceptor, was impregnated on the TNTs surfaces in order to gain a better understanding of electron transfer during photocatalysis. It appears that As(III) can be oxidized to As(V) while Cu(II) is reduced to Cu(I) and Cu(0). The molecular-scale data are very useful in revealing the oxidation states and interconversions of arsenic during the photocatalytic reactions. This work has implications in that the toxicity of arsenic in contaminated groundwater or wastewater can be effectively decreased via solar-driven photocatalysis, which may facilitate further treatments by coagulation.

Advancements on Basic Working Principles of Photo-Driven Oxidative Degradation of Organic Substrates over Pristine and Noble Metal-Modified TiO2. Model Case of Phenol Photo Oxidation

The specific roles played by both support and noble metals in light absorption, charge separation, and the formation of ·OH and O2− (ROS) are analyzed for light-triggered oxidation of phenol (Ph) over pristine and over noble metal (Ag, Au, Pt) -loaded TiO2. Experiments show that the supported noble metals act as a light visible absorber, assist the separation of photo-charges and reduction of O2 to O2−. The O2− oxidizes mildly Ph to oxygenated products (hydroquinone, benzoquinone, and 1,2-dihydroxibenzene). In a parallel process, ·OH radicals, yielded by TiO2, mineralize Ph to CO2 by fast reaction sequences. Radical quenching and photo electrochemical measurements (surface photovoltage) confirm independently that the production of ·OH and O2− scale with oxidative conversion of Ph. The selectivity to CO2 and mild oxidation products is the result of the interplay between catalyst activity for ·OH and for O2− production.

Photodeposition of Silver on Zinc/Calcium Ferrite Nanoparticles: A Contribution to Efficient Effluent Remediation and Catalyst Reutilization

The efficient photodegradation of textile dyes is still a challenge, especially considering resistant azo dyes. In this work, zinc/calcium mixed ferrite nanoparticles prepared by the sol–gel method were coupled with silver by a photodeposition method to enhance the photocatalytic potency. The obtained zinc/calcium ferrites are mainly cubic-shaped nanoparticles sized 15 ± 2 nm determined from TEM and XRD and an optical bandgap of 1.6 eV. Magnetic measurements indicate a superparamagnetic behavior with saturation magnetizations of 44.22 emu/g and 27.97 emu/g, respectively, for Zn/Ca ferrite and Zn/Ca ferrite with photodeposited silver. The zinc/calcium ferrite nanoparticles with photodeposited silver showed efficient photodegradation of the textile azo dyes C.I. Reactive Blue 250 and C.I. Reactive Yellow 145. Subsequent cycles of the use of the photocatalyst indicate the possibility of magnetic recovery and reutilization without a significant loss of efficiency.

Spin-Orbit Coupling Effects in Au 4f Core-Level Electronic Structures in Supported Low-Dimensional Gold Nanoparticles

Despite their many advantages, issues remain unresolved over the variability in catalytic activities in supported gold nanoparticle (AuNP)-based catalysts, which requires precise characterization to unravel the presence of any fine features. Herein, upon analyzing the Au 4f core-level spin-orbit components in many as-synthesized AuNP-based catalysts, we observed that like deviations in the Au 4f7/2 binding energy positions, both the Au 4f7/2-to-Au 4f5/2 peak intensity and linewidth ratios varied largely from the standard statistical bulk reference values. These deviations were observed in all the as-synthesized supported AuNPs irrespective of different synthesis conditions, variations in size, shape or morphology of the gold nanoparticles, and different support materials. On the other hand, the spin-orbit-splitting values remained almost unchanged and did not show any appreciable deviations from the atomic or bulk standard gold values. These deviations could originate due to alterations in the electronic band structures in the supported AuNPs and might be present in other NP-based catalyst systems as well, which could be the subject of future research interest.

Facile Synthesis of Ag Nanowire/TiO2 and Ag Nanowire/TiO2/GO Nanocomposites for Photocatalytic Degradation of Rhodamine B

This paper investigates the photocatalytic characteristics of Ag nanowire (AgNW)/TiO₂ and AgNW/TiO₂/graphene oxide (GO) nanocomposites. Samples were synthesized by the direct coating of TiO₂ particles on the surface of silver nanowires. As-prepared AgNW/TiO₂ and AgNW/TiO₂/GO nanocomposites were characterized by electron microscopy, X-ray diffraction, UV/visible absorption spectroscopy, and infrared spectroscopy. Transmission electron microscope (TEM) images confirmed the successful deposition of TiO₂ nanoparticles on the surface of AgNWs. The photocatalytic activity of synthesized nanocomposites was evaluated using Rhodamine B (RhB) in an aqueous solution as the model organic dye. Results showed that synthesized AgNW/TiO₂/GO nanocomposite has superior photocatalytic activities when it comes to the decomposition of RhB.

Gold-decorated TiO2 nanofibrous hybrid for improved solar-driven photocatalytic pollutant degradation

TiO₂-based nanomaterials are among the most promising photocatalysts for degrading organic dye pollutants. In this work, Au-TiO₂ nanofibers were fabricated by the electrospinning technique, followed by calcination in air at 500 °C. Morphological and structural analyses revealed that the composite consists of TiO₂ nanofibers with embedded Au nanoparticles that are extensively distributed throughout the porous fibrous structure of TiO₂. The photocatalytic performance of these Au-embedded TiO₂ nanofibers was evaluated in the photodegradation of Rhodamine B and methylene blue under solar simulator irradiation. Compared with pristine TiO₂ nanofibers, the Au-embedded TiO₂ nanofibers displayed far better photocatalytic degradation efficiency. The plasmon resonance absorption of Au nanoparticles in the visible spectral region and the effective charge separation at the heterojunction of the Au-TiO₂ hybrid are the key factors that have led to the considerable enhancement of the photocatalytic activity. The results of this study clearly demonstrate the potential of Au-TiO₂ electrospun nanofibers as solar-light-responsive photocatalysts for the effective removal of dye contaminants from aquatic environments.

Green synthesis of Ag/TiO2 composite coated porous vanadophosphates with enhanced visible-light photo-degradation and catalytic reduction performance for removing organic dyes

As environmental pollution and energy shortages have become global concerns, the construction of highly efficient catalysts using facile and green methods remains a long-term goal. In the present study, we proposed a facile catalyst preparation method in which Ag/TiO₂ composites were coated on the surface of the porous pure inorganic crystalline vanadium phosphates (VPO) by a one-step strategy. More importantly, the in situ reduction of Ag nanoparticles was achieved at room temperature without severe conditions or hydrogen atmosphere in which the porous VPO was employed as the reductant. The prepared Ag/VPO@TiO₂ composites act as a class of efficient bifunctional catalysts for visible light photodegradation of MB molecules and catalytic reduction of p-nitrophenol (4-NP). Among these samples, the 6.82%Ag/VPO@TiO₂ composite exhibited a superior photocatalytic activity in the degradation of MB and an ultrafast reduction rate for 4-NP of about 0.1 mM/40 s. The photocatalytic mechanistic studies revealed that the encapsulated VPO with a narrow band gap not only efficiently enhances the photosensitivity of the TiO₂ but also largely facilitates the photogenerated charge separation. The subsequent deposition of Ag NPs is able to further promote electron transfer ability, which leads to the higher photocatalytic activity. Moreover, the contact of Ag NPs with the surface of semiconductor TiO₂ can result in an electron-enhanced area in their interface that could effectively facilitate the uptake of electrons by the 4-NP molecules and then improve the reduction activity.

One-Pot Synthesis of Sulfur-Doped TiO2/Reduced Graphene Oxide Composite (S-TiO2/rGO) With Improved Photocatalytic Activity for the Removal of Diclofenac From Water

Sulfur-doped TiO2 (S-TiO2) composites with reduced graphene oxide (rGO), wt. % of rGO equal to 0.5%, 2.75%, and 5.0%, were prepared by a one-pot solvothermal procedure. The aim was to improve photocatalytic performance in comparison to TiO2 under simulated solar irradiation for the treatment of diclofenac (DCF) in aqueous medium. The obtained composites were characterized for physical-chemical properties using thermogravimetric analysis (TGA), X-ray diffractograms (XRD), Raman, scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), Brauner Emmett Teller (BET), and photoluminescence (PL) analyses, indicating successful sulfur doping and inclusion of rGO. Sulfur doping and rGO have successfully led to a decrease in photogenerated charge recombination. However, both antagonistic and synergistic effects toward DCF treatment were observed, with the latter being brought forward by higher wt.% rGO. The composite with 5.0 wt.% rGO has shown the highest DCF conversion at pH 4 compared to that obtained by pristine TiO2, despite lower DCF adsorption during the initial dark period. The expected positive effects of both sulfur doping and rGO on charge recombination were found to be limited because of the subpar interphase contact with the composite and incomplete reduction of the GO precursor. Consequent unfavorable interactions between rGO and DCF negatively influenced the activity of the studied S-TiO2/rGO photocatalyst under simulated solar irradiation.

Photodeposition of Au Nanoclusters for Enhanced Photocatalytic Dye Degradation over TiO2 Thin Film

Au nanoparticle (NP) decorated heterogeneous TiO₂ catalysts are known to be effective in the degradation of various organic pollutants. The photocatalytic performance of such Au-TiO₂ structures remarkably depends on the size, morphology, and surface coverage of the Au NPs decorating TiO₂. Here we propose an effective way of preparing a highly active Au nanocluster (NC) decorated TiO₂ thin film by a novel photodeposition method. By altering the solvent type as well as the illumination time, we achieved well-controlled surface coverage of TiO₂ by Au NCs, which directly influences the photocatalytic performance. Here the Au NCs coverage affects both the electron store capacity and the optical absorption of the hybrid Au-TiO₂ system. At low surface coverage, 19.2-29.5%, the Au NCs seem to enhance significantly the optical adsorption of TiO₂ at UV wavelengths which therefore leads to a higher photocatalytic performance.

N-Promoted Ru1/TiO2 single-atom catalysts for photocatalytic water splitting for hydrogen production: a density functional theory study

In our Ru₁–N₁/TiO₂ single-atom catalyst system, isolated Ru₁ atoms act as active sites for the reduction of protons, and the TiO₂ support offers the photogenerated carriers, allowing for a hydrogen evolution activity comparable to that of Pd.

Comparison of radical-driven technologies applied for paraben mixture degradation: mechanism, biodegradability, toxicity and cost assessment

Parabens (esters of p-hydroxybenzoic acid) are xenobiosis belonging to endocrine disruptors and commonly used as a preservative in cosmetics, food, pharmaceutical, and personal care products. Their wide use is leading to their appearance in water and wastewater in the range from ng/L to mg/L. In fact, the toxicity of benzylparaben is comparable to bisphenol A. Therefore, it is important to find not only effective but also ecofriendly methods for their removal from aqueous environment since the traditional wastewater treatment approaches are ineffective. Herein, for the first time, such extended comparison of several radical-driven technologies for paraben mixture degradation is presented. The detailed evaluation included (1) comparison of ozone and hydroxyl peroxide processes; (2) comparison of catalytic and photocatalytic processes (including photocatalytic ozonation); (3) characterisation of catalysts using SEM, XRD, DRS, XPS techniques and BET isotherm; (4) mineralisation, biodegradability and toxicity assessment; and (5) cost assessment. O₃, H₂O₂/Fe²⁺, H₂O₂/UVC, O₃/H₂O₂, O₃/UVA, O₃/H₂O₂/UVA, UVA/catalyst, O₃/catalyst and O₃/UVA/catalyst were selected from advanced oxidation processes to degrade parabens as well as to decrease its toxicity towards Aliivibrio fischeri, Corbicula fluminea and Lepidium sativum. Research was focused on the photocatalytic process involving visible light (UVA and natural sunlight) and TiO₂ catalysts modified by different metals (Ag, Pt, Pd, Au). Photocatalytic oxidation showed the lowest efficiency, while in combining ozone with catalysis and photocatalysis process, degradation efficiency and toxicity removal were improved. Photocatalytic ozonation slightly improved degradation efficiency but appreciably decreased transferred ozone dose (TOD). Results indicate that the degradation pathway is different, or different transformation products (TPs) could be formed, despite that the hydroxyl radicals are the main oxidant. Graphical abstract.

Multiplasmon modes for enhancing the photocatalytic activity of Au/Ag/Cu2O core-shell nanorods

One of the critical challenges for semiconductor photocatalysis is the high efficiency utilization of solar energy. For plasmonic metal-semiconductor photocatalysts, the photocatalytic activity over an extended wavelength range for a photoresponsive semiconductor could be significantly improved either via the direct electron transfer (DET) or via the plasmon-induced resonant energy transfer (PIRET). Still, the narrow spectral overlap of plasmon and the semiconductor band edge is a key factor in restricting the development of PIRET. Herein, we have introduced a simple and versatile strategy to realize a broad spectral overlap by creating multipolar plasmon resonances near the semiconductor band edge. Cu₂O coated Au/Ag nanorods (NRs) were prepared using a facile wet chemistry method. Transverse plasmon modes of Au/Ag/Cu₂O NRs can split into dipole and octupole plasmon modes. The core aspect ratio and shell thickness could be used to regulate these two modes for extending the spectral overlap of plasmon resonance and the Cu₂O band edge. Au/Ag/Cu₂O NRs were found to display enhanced visible light photocatalytic activity compared to spherical Au/Ag/Cu₂O nanoparticles. The enhancement mechanism was ascribed to both dipole and octupole plasmon modes boosting electron-hole separation in Cu₂O via PIRET as confirmed by transient absorption measurements.

Preparation of pod-shaped TiO2 and Ag@TiO2 nano burst tubes and their photocatalytic activity

The pod-shaped TiO2 nano burst tubes (TiO2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H2C2O4), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO2 NBTs; the effect of the concentration of AgNO3 solution on the particle size and loading of AgNPs on the surface of TiO2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO2 NBTs and Ag@TiO2 NBTs. The results showed that TiO2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir-Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO2 NBTs > TiO2 NBTs > TiO2 nanotubes.

Titanate Nanowires as One-Dimensional Hot Spot Generators for Broadband Au-TiO2 Photocatalysis

Metal-semiconductor nanocomposites have become interesting materials for the development of new photocatalytic hybrids. Along these lines, plasmonic nanoparticles have proven to be particularly efficient photosensitizers due to their ability to transfer plasmonic hot electrons onto large bandgap semiconductors such as TiO₂, thus extending the activity of the latter into a broader range of the electromagnetic spectrum. The extent of this photosensitization process can be substantially enhanced in those geometries in which high electromagnetic fields are created at the metal-semiconductor interface. In this manner, the formation of plasmonic hot spots can be used as a versatile tool to engineer the photosensitization process in this family of hybrid materials. Herein, we introduce the use of titanate nanowires as ideal substrates for the assembly of Au nanorods and TiO₂ nanoparticles, leading to the formation of robust hybrids with improved photocatalytic properties. Our approach shows that the correct choice of the individual units together with their rational assembly are of paramount importance in the development of complex nanostructures with advanced functionalities.

Photoelectrochemical Behavior of Silver Nanoparticles inside Mesoporous Titania: Plasmon-Induced Charge Separation Effect

The self-assembly block copolymer method was used to synthesize mesoporous titania films and silver nanoparticles (NPs) were grown inside the films. Such silver NPs-titania films are known for their multicolor photochromic properties due to a photo-oxidation reaction of silver in the presence of titania under light excitation which is attributed to a plasmon induced charge separation. Here, the photoelectrochemical properties of these composite films have been investigated at different light wavelengths and chemical environment in order to characterize the light-induced redox reactivity modifications. Cyclic voltammetry study shows that the Ag⁺ electro-reduction peak potential varies depending on the light irradiation, which determines the state of the silver nanoparticles complexed or not by titania.

Solar light decomposition of warfare agent simulant DMMP on TiO2/graphene oxide nanocomposites

Solar light-induced photodecomposition of organophosphorus warfare agent simulant dimethyl methylphosphonate (DMMP) on the surfaces of TiO₂/graphene oxide (GO) nanocomposites was studied by in situ DRIFT spectroscopy.

Photocatalytic Activity of TiO2/AuNRs–SiO2 Nanocomposites Applied to Building Materials

In this work, the self-cleaning and photocatalytic properties of mesoporous TiO2/AuNRs-SiO2 composites (namely UCA–TiO2Au) prepared by a simple and low-cost technique were investigated toward application in building materials. Mesoporous photocatalytic nanocomposites coating the surface of stone and other building materials are a very promising approach to address relevant questions connected with the increasing atmospheric pollution. We tested three types of preformed TiO2/AuNRs nanostructures in order to evaluate the effect of AuNRs on the photocatalytic activity of resulting coatings deposited on the surface of a popular building limestone. The resulting nanocomposites provide crack-free surface coatings on limestone, effective adhesion, improve the stone mechanical properties and impart hydrophobic and self-cleaning properties. Photocatalytic characterization involved the degradation of a target compound (Methylene blue; MB) under direct exposure to simulated solar light using TiO2 P25 Evonik (TiO2 P25) as a reference material. Moreover, these coatings upon irradiation by simulated solar light were successfully employed for the photocatalytic oxidation of carbon soot. The experimental results revealed that UCA–TiO2Au samples are the best performing coating in both MB bleaching and soot degradation.

Crystallization of microporous TiO2 through photochemical deposition of Pt for photocatalytic degradation of volatile organic compounds

The photocatalytic mineralization efficiency of volatile organic compounds (VOCs) is determined by adsorption of reactants, separation of charge carriers, and reaction activity of catalyst surface. Herein, we provide a strategy to synthesize a novel catalyst, namely, PhPt-Micro, which is characterized by high adsorption ability, charge separation efficiency, and surface reaction activity. Toluene was chosen as the model VOC. The effects of photochemical deposition of Pt on the physical properties of microporous amorphous TiO₂ (Micro) and toluene mineralization were studied using N₂ adsorption/desorption, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, GC-flame ionization detection, and surface photovoltage spectroscopy (SPS) analyses. After photochemical treatment, the structure of Micro was optimized, and Pt nanoparticles were successfully deposited at the outlet of electrons on the catalyst surface. SPS result proved that the optimized structure enhanced the separation efficiency of charge carriers and the migration of photo-generated electrons to the PhPt-Micro surface. The quasi-equilibrium adsorption amount of toluene over PhPt-Micro was two times higher than that with commercial nano TiO₂ (P25). The micropores concentrated toluene on the catalyst surface and hindered intermediate desorption. The mineralization efficiency of toluene over PhPt-Micro was 2.4 and 5.9 times higher than those over Micro and P25, respectively.

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

The utilisation of sunlight as an abundant and renewable resource has motivated the development of sustainable photocatalysts that can collectively harvest visible light. However, the bottleneck in utilising the low energy photons has led to the discovery of plasmonic photocatalysts. The presence of noble metal on the plasmonic photocatalyst enables the harvesting of visible light through the unique characteristic features of the noble metal nanomaterials. Moreover, the formation of interfaces between noble metal particles and semiconductor materials further results in the formation of a Schottky junction. Thereby, the plasmonic characteristics have opened up a new direction in promoting an alternative path that can be of value to the society through sustainable development derived through energy available for all for diverse applications. We have comprehensively prepared this review to specifically focus on fundamental insights into plasmonic photocatalysts, various synthesis routes, together with their strengths and weaknesses, and the interaction of the plasmonic photocatalyst with pollutants as well as the role of active radical generation and identification. The review ends with a pinnacle insight into future perspectives regarding realistic applications of plasmonic photocatalysts.