The g-C3N4@CdO/ZnO ternary composite: photocatalysis, thermodynamics and acute toxicity studies

Binary and ternary nanocomposites (NCs) were synthesized by precipitation and through facile one-pot ultrasonic assisted methods to serve as photocatalysts for treatment of wastewater as well as their toxicity toward aquatic organism (Nile tilapia). The crystalline structure, band gap energy and functional groups of these materials were characterized by XRD, UV-Vis, and FT-IR instrumental techniques. Based on the UV-Vis study, the band gap of ZnO/CdO (ZC) to hybrid g-C₃N₄@ZnO/CdO (GZC) nanocomposite was reduced from 3.41 eV to 3.21 eV, suggesting good charge carrier mobility. Photocatalytic degradation performances of ZC and GZC were further assessed by conducting methyl red (MR) photodegradation reaction using UV light. The highest degradation efficiency was achieved for GZC NCs (97.78%) than ZC (89.41%) in 2 h. The values of free energy, and enthalpy were negative; showing spontaneous photodegradation of MR. The kinetics of photodegradation follows pseudo-first-order reaction with rate order of 0.0713 min⁻¹. The HO∗ and O₂∗ were main active species for the photodegradation of MR. The toxicity of NCs calculated and the lethal concentration (LC₅₀) was 113 ppm after 12 h.

The photocatalytic activity and purification performance of g-C3N4/carbon nanotubes composite photocatalyst in underwater environment

Graphite carbon nitride (g-C₃N₄) is a promising photocatalyst for its high catalytic activity, low-cost and high-biosafety characteristics. Due to the complexity of underwater photochemical reaction conditions and the disadvantages of g-C₃N₄ itself such as low specific surface area, easy recombination of photogenerated electron-hole pairs and insufficient light absorption capacity, the application of g-C₃N₄ in the field of water purification is limited. For improving underwater photocatalytic performance of g-C₃N₄, a g-C₃N₄/carbon nanotubes (CNT-CN) composite photocatalyst with high specific surface area and enhanced light absorption capacity were prepared by in situ solvothermal method. Its photodegradation efficiency at different underwater transmission light was further studied. The results show that CNT has good compatibility with g-C₃N₄. g-C₃N₄ can grow in situ on the surface of CNT and form a stable composite structure. Moreover, its degradation efficiency under long-wavelength irradiation is improved significantly. The degradation rate of CNT-CN at 550-700 nm was about 3 times than that of g-C₃N₄. Furthermore, CNT-CN can maintain higher photocatalytic activity under water. At 40 cm depth where light intensity and ultraviolet spectra were attenuated 63.8% and 80.1%, respectively, the degradation rate of CNT-CN3 can still reach 3.49 times than that of g-C₃N₄. Based on this study, the introduction of CNT effectively promotes the electron-hole separation efficiency of g-C₃N₄, widens its spectral response range, and thus improves its underwater degradation efficiency.

Recent advances in visible-light graphitic carbon nitride (g-C3N4) photocatalysts for chemical transformations

Graphitic carbon nitride (g-C3N4) has emerged as a new research hotspot, attracting broad interdisciplinary attention in the form of metal-free and visible-light-responsive photocatalysts in the field of solar energy conversion and environmental remediation. These photocatalysts have evolved as attractive candidates due to their non-toxicity, chemical stability, efficient light absorption capacity in the visible and near-infrared regions, and adaptability as a platform for the fabrication of hybrid materials. This review mainly describes the latest advances in g-C3N4 photocatalysts for chemical transformations. In addition, the typical applications of g-C3N4-based photocatalysts involving organic transformation reactions are discussed (synthesis of heterocycles, hydrosulfonylation, hydration, oxygenation, arylation, coupling reactions, etc.).

The Synthesis of h-BN-Modified Z-Scheme WO3/g-C3N4 Heterojunctions for Enhancing Visible Light Photocatalytic Degradation of Tetracycline Pollutants

The photocatalytic performance of common photocatalysts is limited by their low surface area, insufficient absorption of light energy, and fast photogenerated electron-hole recombination rate. The introduction of Z-scheme photocatalysts decorated with hexagonal boron nitride (h-BN) has already been confirmed to be an effective way to extend the surface area and increase the charge separation, thereby enhancing the photocatalytic performance. In this study, a hexagonal boron nitride (h-BN)-decorated WO₃/g-C₃N₄ heterojunction photocatalyst was successfully synthesized via an in situ method using tungstic acid, melamine, and hexagonal boron nitride as the precursors. The physical and chemical properties of the resulting samples were thoroughly characterized. The surface, morphological, and optical properties of the resulting materials were thoroughly characterized by XRD, XPS, SEM, TEM, UV-vis DRS, BET surface areas, PL, and ESR analysis. The WO₃/g-C₃N₄/BN composite exhibited a much higher photocatalytic activity for tetracycline degradation under visible light irradiation than pure g-C₃N₄, WO₃, and BN. The favorable photocatalytic activity of WO₃/g-C₃N₄/BN composites can be ascribed to the increased surface area and enhanced separation efficiency of photogenerated electron-hole pairs by adding h-BN nanosheets and forming the WO₃/g-C₃N₄ heterojunction. This work indicates that the WO₃/g-C₃N₄/BN photocatalyst is a promising material in wastewater treatment.

Facile synthesis of highly crystalline g-C3N4 nanosheets with remarkable visible light photocatalytic activity for antibiotics removal

g-C₃N₄ has attracted much attention in photocatalysis field because of its good visible light response. However, its photocatalytic activity is still greatly limited by fast carriers recombination and small specific surface. In order to promote carriers separation and pollutants adsorption, a facile synthesis scheme combining hydrothermal method with secondary calcination process under N₂ gas protection was developed, and highly crystalline g-C₃N₄ nanosheets (HCCNNS) were successfully prepared. During ciprofloxacin (CIP) and sulfamethazine (SMZ) degradation, it showed excellent visible light photocatalytic activity, wherein CIP and SMZ with 10 mg/L could achieve degradation efficiency of 98.4% and 96.9% in 60 min under visible light irradiation. Compared with conventional g-C₃N₄, the degradation rate constants were enhanced by 6.9 and 5.8 times, respectively. From the perspectives of morphology, optical property and surface chemistry, the ultra-high activity of HCCNNS is mainly attributed to its highly crystalline structure and nanosheet morphology, which not only reduce the carriers transfer resistance, promote the pollutants adsorption capability, but also expand the light absorption range, and promote the carriers separation. Furthermore, the synthesis procedure of HCCNNS possesses the nature of high yield and excellent cost performance, thus, HCCNNS possesses great potential for mass production and practical application for antibiotics removal.

Construction of a 2D/2D heterojunction via integrating MoS2 on Co-doped g-C3N4 to improve photocatalytic hydrogen evolution under visible light irradiation

Schematic of the photocatalytic mechanism of the MoS₂/CoCN-3 composite with enhanced photocatalytic properties for hydrogen evolution.

g-C3N4@Ce-MOF Z-scheme heterojunction photocatalyzed cascade aerobic oxidative functionalization of styrene

A unique composite of the cerium-based metal–organic framework (Ce-UiO-66) modified with graphitic carbon nitride nanosheets (g-C₃N₄) has been synthesized. The g-C₃N₄@Ce-MOF as a photocatalyst was employed in photocatalytic aerobic oxidative Hantzsch pyridine synthesis of styrene.

Carbon-based nanomaterials: in the quest of alternative metal-free photocatalysts for solar water splitting

One of the alarming problems of modern civilization is global warming due to the inevitable rise of CO2 in the environment, mainly because of the excessive use of traditional fossil fuels. The gradual depletion of fossil fuels is another challenge regarding the future energy demand; therefore, alternative renewable energy research is necessary. One of the alternative approaches is the solar fuel generation by means of photocatalytic water splitting and more specifically, hydrogen evolution from water through the reductive half-reaction. Hydrogen is the cleanest fuel and does not produce any greenhouse gas upon direct combustion, or even while acting as a chemical feedstock for other transportable fuel generation. Therefore, it is desirable to produce efficient photocatalysts for solar water splitting. After the discovery of the first photocatalytic water splitting reaction by Fujisima and Honda, several advancements have been made with metal-based inorganic semiconductor photo-catalysts. However, their practical applicability is still under debate considering the environmental sustainability, stability and economical expenses. As a result, it is essential to develop alternate photocatalysts that are environmentally sustainable, cost-effective, stable and highly efficient. The metal-free approach is one of the most promising approaches in this regard. Herein, we discuss the recent developments in carbon-based materials and their hybrids as alternative metal free photocatalysts for solar water splitting. The present discussion includes g-C3N4, two-dimensional graphene/graphene oxides, one-dimensional carbon nanotubes/carbon nanofibers and zero-dimensional graphene QDs/carbon dots. We have focused on the rectification of exciton generation, charge separation and interfacial photochemical processes for photocatalysis, followed by possible optimization pathways of these typical all carbon-based materials. Finally, we have highlighted several fundamental challenges and their possible solutions, as well as the future direction on this particular aspect.

Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model

The aim of this study was ultrasound assisted removal of Ceftriaxone sodium (CS) based on CCD model. Using sonochemical synthesized Bi₂WO₆ implanted on graphitic carbon nitride/Multiwall carbon nanotube (g-C₃N₄/MWCNT/Bi₂WO₆). For this purpose g-C₃N₄/MWCNT/Bi₂WO₆ was synthesized and characterized using diverse approaches including XRD, FE-SEM, XPS, EDS, HRTEM, FT-IR. Then, the contribution of conventional variables including pH, CS concentration, adsorbent dosage and ultrasound contact time were studied by central composite design (CCD) under response surface methodology (RSM). ANOVA was employed to the variable factors, and the most desirable operational conditions mass provided. Drug adsorption yield of 98.85% obtained under these defined conditions. Through conducting five experiments, the proper prediction of the optimum point were examined. The respective results showed that RSD% was lower than 5% while the t-test confirmed the high quality of fitting. Langmuir isotherm equation fits the experimental data best and the removal followed pseudo-second order kinetics. The estimation of the experimentally obtained maximum adsorption capacities was 19.57 mg.g^- of g-C₃N₄/MWCNT/Bi₂WO₆ for CS. Boundary layer diffusion explained the mechanism of removal via intraparticle diffusion.

Emerging Chemical Functionalization of g-C3N4: Covalent/Noncovalent Modifications and Applications

Atomically 2D thin-layered structures, such as graphene nanosheets, graphitic carbon nitride nanosheets (g-C₃N₄), hexagonal boron nitride, and transition metal dichalcogenides are emerging as fascinating materials for a good array of domains owing to their rare physicochemical characteristics. In particular, graphitic carbon nitride has turned into a hot subject in the scientific community due to numerous qualities such as simple preparation, electrochemical properties, high adsorption capacity, good photochemical properties, thermal stability, and acid-alkali chemical resistance, etc. Basically, g-C₃N₄ is considered as a polymeric material consisting of N and C atoms forming a tri-s-triazine network connected by planar amino groups. In comparison with most C-based materials, g-C₃N₄ possesses electron-rich characteristics, basic moieties, and hydrogen-bonding groups owing to the presence of hydrogen and nitrogen atoms; therefore, it is taken into account as an interesting nominee to further complement carbon in applications of functional materials. Nevertheless, g-C₃N₄ has some intrinsic limitations and drawbacks mainly related to a relatively poor specific surface area, rapid charge recombination, a limited light absorption range, and a poor dispersibility in both aqueous and organic mediums. To overcome these shortcomings, numerous chemical modification approaches have been conducted with the aim of expanding the range of application of g-C₃N₄ and enhancing its properties. In the current review, the comprehensive survey is conducted on g-C₃N₄ chemical functionalization strategies including covalent and noncovalent approaches. Covalent approaches consist of establishing covalent linkage between the g-C₃N₄ structure and the chemical modifier such as oxidation/carboxylation, amidation, polymer grafting, etc., whereas the noncovalent approaches mainly consist of physical bonding and intermolecular interaction such as van der Waals interactions, electrostatic interactions, π-π interactions, and so on. Furthermore, the preparation, characterization, and diverse applications of functionalized g-C₃N₄ in various domains are described and recapped. We believe that this work will inspire scientists and readers to conduct research with the aim of exploring other functionalization strategies for this material in numerous applications.

Integrating CuInSe2 nanocrystals with polymeric carbon nitride nanorods for photocatalytic water splitting

Developing photocatalysts with improved photoactivity and efficiency has remained an enduring theme both fundamentally and technologically in the field of photocatalysis. Polymeric carbon nitride (CN) has been widely exploited as an earth-abundant photocatalyst for water redox reactions. Nevertheless, the limited visible-light utilization rate and the high recombination rate of photoinduced charge carriers give rise to the moderate photocatalytic reactivity of CN in water splitting. Herein, p-type CuInSe2 nanocrystals are prepared by a solvothermal approach and then immobilized with n-type CN nanorods through self-assembly and thermal treatment process, forming a CuInSe2/CN hybrid photocatalyst. Benefiting from the p-n heterojunction, a 3% CuInSe2/CN nanocomposite photocatalyst exhibits a three-fold increase in the hydrogen evolution rate (HER) compared to that of bare CN nanorods owing to the strengthened visible-light capturing capability and improved separation rate of photoexcited charge carriers. This work paves new avenues for the construction of p-n heterojunction photocatalysts for solar fuel production.

Metal-free photocatalysts for hydrogen evolution

This article provides a comprehensive review of the latest progress, challenges and recommended future research related to metal-free photocatalysts for hydrogen productionviawater-splitting.

Modified Graphitic Carbon Nitride Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Considerable research efforts have been devoted to develop noble-metal-free cocatalysts coupled with semiconductors for highly efficient photocatalytic H₂ evolution as part of the challenge toward solar-to-fuel conversion. Herein, a new cocatalyst with excellent activity in the electrocatalytic H₂ evolution reaction (HER) that is based on Co sheathed in N-doped graphitic carbon nanosheets (Co@NC) was fabricated by a surfactant-assisted pyrolysis approach and then coupled with g-C₃ N₄ nanosheets to construct a 2 D-2 D g-C₃ N₄ /Co@NC composite photocatalyst by a simple grinding method. As a result of advantages in effective electrocatalytic HER activity, suitable electronic band structure, and rapid interfacial charge transfer brought about by the 2 D-2 D spatial configuration, the g-C₃ N₄ /Co@NC photocatalyst that contained 4 wt % Co@NC presented a high photocatalytic H₂ generation rate of 15.67 μmol h^-1 under visible-light irradiation (λ≥400 nm), which was 104.5 times higher than that of pristine g-C₃ N₄ . The optimum g-C₃ N₄ /Co@NC photocatalyst showed a high apparent quantum efficiency of 10.82 % at λ=400 nm.

Synthesis of g-C3N4-Decorated ZnO Porous Hollow Microspheres for Room-Temperature Detection of CH4 under UV-Light Illumination

UV light-assisted gas sensors based on metal oxide semiconductor (MOS) have attracted much attention in detecting flammable and explosive gases at room temperature. In this paper, graphite-based carbon nitride (g-C3N4) nanosheets-decorated ZnO porous hollow microspheres (PHMSs) with the size about 3~5 μm in diameter were successfully synthesized by annealing the solvothermally-synthesized Zn5(CO3)2(OH)6 PHMSs together with g-C3N4. The synthesized samples were characterized by XRD, SEM, TEM, FT-IR and XPS. The results indicated that the prepared g-C3N4/ZnO PHMSs were constructed by numerous loosely stacked ZnO nanoparticles of 20~30 nm in diameter. Gas sensing tests indicated that under UV light (365~385 nm) illumination, the sensors fabricated with g-C3N4/ZnO HPMSs showed an enhanced response and faster response speed than the pure ZnO counterpart at room temperature. In addition, the g-C3N4/ZnO sensor also exhibited good repeatability and long-term stability for CH4 detection.

Recent Advances in Carbonaceous Photocatalysts with Enhanced Photocatalytic Performances: A Mini Review

Photocatalytic processes based on various semiconductors have been widely utilized in different applications, with great potential for use in environmental pollution remediation and sustainable energy generation. However, critical issues, including low light adsorption capability, wide energy bandgap, and unsatisfactory physicochemical stability still seriously limit the practical applications of photocatalysts. As a solution, the introduction of carbonaceous materials with different structures and properties into a photocatalyst system to further increase the activity has attracted much research attention. This mini review surveys the related literatures and highlights recent progress in the development of carbonaceous photocatalysts, which include various metal semiconductors with activated carbon, carbon dots, carbon nanotubes/nanofibers, graphene, fullerene, and carbon sponges/aerogels. Moreover, graphitic carbon nitride is also discussed as a carbon-rich and metal-free photocatalyst. The recently developed synthesis strategies and proposed mechanisms underlying the photocatalytic activity enhancement for different applications are summarized and discussed. Finally, ongoing challenges and the developmental direction for carbonaceous photocatalysts are proposed.

A novel non-enzymatic sensing platform for determination of 5'-guanosine monophosphate in meat

Graphitic carbon nitride (g-C₃N₄) doped carboxylated MWCNTs nanocomposite was synthesized using a simple method. The composite films containing 45 wt%, 50 wt%, 56 wt%, 67 wt% fraction of the carboxylated MWCNTs doped into g-C₃N₄ were fabricated and characterized. An electrochemical non-enzymatic sensor for determination of 5'-guanosine monophosphate (GMP) based on the nanocomposite was developed. The results indicate that the g-C₃N₄-carboxylated MWCNTs nanocomposite has highly electrocatalytic activity, good conductivity and biocompatibility, which plays an essential role in the determination of GMP. Under the optimum conditions, the linear fitting equation was I (µA) = -0.0022c (μg·mL^-1) + 0.3560 (R² = 0.9982). The linear range was from 0.5 to 100 μg·mL^-1 and the detection limit (LOD, S/N = 3) was 0.109 μg·mL^-1. This non-enzymatic sensor can offer a better alternative to other methods for the analysis of GMP because of cheap cost, low detection limit and good anti-jamming capability in meat quality evaluation.

Bimetallic PtAu Alloy Nanoparticles-Integrated g-C3N4 Hybrid as an Efficient Photocatalyst for Water-to-Hydrogen Conversion

Herein, we report the synthesis of metal (Pt and Au) and metal alloy (PtAu) nanoparticles (NPs)-integrated graphitic carbon nitride (g-C₃N₄) hybrids using a facile solvothermal route for water-splitting application. The metal and metal alloy NPs with varying percentages of Pt and Au are found to be in the size range of 3-5 nm and uniformly distributed on the g-C₃N₄ sheets. The metal and metal alloy NPs act as cocatalyst for g-C₃N₄ to enhance the photocatalytic activity for hydrogen (H₂) generation through higher light absorption and efficient charge separation. The alloy composition plays an important role to maximize the photoactivity, with an optimized PtAu/g-C₃N₄ sample delivered 1009 μmol g^-1 h^-1 of H₂. The visible light assisted photocatalytic H₂ evolution is further investigated with the optimized PtAu alloy NPs-integrated g-C₃N₄. This study presents a robust, stable, and easily synthesizable PtAu/g-C₃N₄ hybrid material as a promising photocatalyst for H₂ generation through water splitting.

A Z-Scheme Polyimide/AgBr@Ag Aerogel with Excellent Photocatalytic Performance for the Degradation of Oxytetracycline

A novel Z-scheme polyimide (PI)/AgBr@Ag aerogel photocatalyst has been successfully synthesized by combining an in situ precipitation method and a supercritical drying method. The as-prepared PI/AgBr@Ag-50 (50 wt % AgBr@Ag in PI/AgBr@Ag) aerogel photocatalyst exhibited excellent photocatalytic activity for oxytetracycline degradation with a rate constant of 0.025 min^-1 , which was 6.9 and 2.6 times higher than that of the PI aerogel or the AgBr@Ag nanoparticles, respectively. More significantly, the PI/AgBr@Ag-50 aerogel photocatalyst showed stable cycling, which could be attributed to the high mechanical strength and 3D network of the PI aerogel. The introduction of AgBr@Ag on PI with a heterojunction structure efficiently promoted the separation of electron-hole pairs by a Z-scheme mechanism. The reduced metallic Ag nanoparticles were found to function as centers for the transfer of electrons from AgBr to PI. This work has revealed a new application for the aerogel PI/AgBr@Ag photocatalyst in environmental protection.

Synthesis of hollow lantern-like Eu(III)-doped g-C3N4 with enhanced visible light photocatalytic perfomance for organic degradation

A series of hollow structure lantern-like Eu(III)-doped g-C₃N₄ (xEu-CN, x = 1, 2, 3) was firstly synthesized by heating a mixture of melamine, HNO₃ and Eu₂O₃ at 500 °C for 2 h. The phase, morphology and optical properties of the serial xEu-CN samples were characterized by different techniques, including TEM, XRD, FT-IR, SEM, XPS, BET, UV-vis, PL, photocurrent, and EIS. The results indicated that Eu doping extraordinarily enhanced the photocatalytic activity of pure g-C₃N₄, and the 2Eu-CN exhibited the highest photocatalytic performance with a 98% (82%) degradation rate for RhB (TC), 6.03 (1.71)-fold of pure g-C₃N₄(CN). The higher photocatalytic efficiency is ascribed to the synergy effect of Eu(III) and the hollow structures, which led to a larger surface specific area, bandgap narrowing, enhanced light harvesting ability and efficient charge separation.

Simultaneous covalent and noncovalent carbon nanotube/Ag3PO4 hybrids: new insights into the origin of enhanced visible light photocatalytic performance

Understanding the interfacial interaction is of paramount importance for rationally designing carbon nanomaterial-based hybrids with optimal performance for electronics, optoelectronics, sensing, advanced energy conversion and storage. Here, we firstly reveal that both covalent and noncovalent interactions simultaneously exist in carbon nanotube (CNT)/Ag₃PO₄ hybrids by studying systematically the electronic and optical properties to elucidate the mechanism of their enhanced photocatalytic performance. Metallic CNT(9,0) may chemically or physically interact with the Ag₃PO₄(100) surface depending on its relative orientations, whereas semiconducting CNT(10,0) can only noncovalently functionalize Ag₃PO₄. The C-Ag bond in the covalently bonded hybrid and type-II, staggered, band alignment in noncovalent hybrids lead to a robust separation of photoexcited charge carriers between two constituents, thus enhancing the photocatalytic activity. The small band gap makes the CNT/Ag₃PO₄ hybrids absorb sunlight from the ultraviolet to infrared region. Moreover, CNTs are not only effective sensitizers, but also highly active co-catalysts in hybrids. The results can be rationalized by the available experiments, thereby partly resolving a debate on the interpretation of the experimental results, and paving the way for developing highly efficient carbon-based nanophotocatalysts.

Efficient and stable photocatalytic NO removal on C self-doped g-C3N4: electronic structure and reaction mechanism

The unique electronic structure of C self-doped g-C₃N₄ enables highly enhanced photocatalytic NO removal efficiency.

Metal-Free Photocatalyst with Visible-Light-Driven Post-Illumination Catalytic Memory

A novel metal-free photocatalyst with post-illumination catalytic memory was fabricated by the graphitic carbon nitride (g-C₃N₄), carbon nanotubes (CNTs), and graphene (Gr), in which g-C₃N₄ acts as an efficient photocatalyst and the CNTs and Gr act as supercapacitors. The removal of phenol was achieved in the dark by post-illumination catalytic memory because the photocatalyst could store a portion of its photoactivity via photogenerated electrons in the CNTs and Gr under visible-light illumination and then release the electrons again in the dark. Therefore, this metal-free photocatalyst is capable of operation in the dark for a broad range of applications.