Enhancement of Light Efficiency of Deep-Ultraviolet Light-Emitting Diodes by Encapsulation with a 3D Photonic Crystal Reflecting Layer

Recently, UVC LEDs, which emit deep ultraviolet light, have found extensive applications across various fields. This study demonstrates the design and implementation of thin films of three-dimensional photonic crystals (3D PhCs) as reflectors to enhance the light output power (LOP) of UVC LEDs. The 3D PhC reflectors were prepared using the self-assembly of silica nanospheres on a UVC LED lead frame substrate via the evaporation-induced method (side) and the gravitational sedimentation method (bottom), respectively. These PhCs with the (111) crystallographic plane were deposited on the side wall and bottom of the UVC LED lead frame, acting as functional materials to reflect UVC light. The LOP of UVC LEDs with 3D PhC reflectors at a driving current of 100 mA reached 19.6 mW. This represented a 30% enhancement compared to commercial UVC LEDs with Au-plated reflectors, due to the UVC light reflection by the photonic band gaps of 3D PhCs in the (111) crystallographic plane. Furthermore, after aging tests at 60 °C and 60% relative humidity for 1000 h, the relative LOP of UVC LEDs with 3D PhC reflectors decreased by 7%, which is better than that of commercial UVC LEDs. Thus, this study offers potential methods for enhancing the light output efficiency of commercial UVC light-emitting devices.

Metal-organic framework template-guided electrochemical lithography on substrates for SERS sensing applications

The templating method holds great promise for fabricating surface nanopatterns. To enhance the manufacturing capabilities of complex surface nanopatterns, it is important to explore new modes of the templates beyond their conventional masking and molding modes. Here, we employed the metal-organic framework (MOF) microparticles assembled monolayer films as templates for metal electrodeposition and revealed a previously unidentified guiding growth mode enabling the precise growth of metallic films exclusively underneath the MOF microparticles. The guiding growth mode was induced by the fast ion transportation within the nanochannels of the MOF templates. The MOF template could be repeatedly used, allowing for the creation of identical metallic surface nanopatterns for multiple times on different substrates. The MOF template-guided electrochemical growth mode provided a robust route towards cost-effective fabrication of complex metallic surface nanopatterns with promising applications in metamaterials, plasmonics, and surface-enhanced Raman spectroscopy (SERS) sensing fields.

Coupling of nanocrystal hexagonal array and two-dimensional metastable substrate boosts H2-production

Designing well-ordered nanocrystal arrays with subnanometre distances can provide promising materials for future nanoscale applications. However, the fabrication of aligned arrays with controllable accuracy in the subnanometre range with conventional lithography, template or self-assembly strategies faces many challenges. Here, we report a two-dimensional layered metastable oxide, trigonal phase rhodium oxide (space group, P-3m1 (164)), which provides a platform from which to construct well-ordered face-centred cubic rhodium nanocrystal arrays in a hexagonal pattern with an intersurface distance of only 0.5 nm. The coupling of the well-ordered rhodium array and metastable substrate in this catalyst triggers and improves hydrogen spillover, enhancing the acidic hydrogen evolution for H₂ production, which is essential for various clean energy-related devices. The catalyst achieves a low overpotential of only 9.8 mV at a current density of −10 mA cm⁻², a low Tafel slope of 24.0 mV dec⁻¹, and high stability under a high potential (vs. RHE) of −0.4 V (current density of ~750 mA cm⁻²). This work highlights the important role of metastable materials in the design of advanced materials to achieve high-performance catalysis.

The construction of well-ordered nanoarrays, particularly invoking metastable material phases, remains a challenge. Here, authors prepared a well-ordered, rhodium nanoarray on two-dimensional, metastable rhodium oxide to enhance hydrogen evolution electrocatalysis.

High-performance plasmonic lab-on-fiber sensing system constructed by universal polymer assisted transfer technique

Plasmonic lab-on-fiber (LOF) system has become an emerging sensing platform for the realization of miniaturized and portable plasmonic sensors. Herein, a facile and efficient polymer assisted transfer technique was reported for the preparation of plasmonic LOF systems. The proposed plasmonic LOF system was constructed through transferring plasmonic arrays to the end surface of optical fibers using polylactic acid as the sacrificial layer. The morphology of the transferred plasmonic arrays maintains excellent consistency with the original arrays. Importantly, the as-prepared plasmonic LOF system also possesses outstanding sensing performance in refractive index sensing and quantitative label-free biosensing applications. Additionally, the proposed polymer assisted transfer technique shows broad universality for various plasmonic arrays. Together with the above features, it is believed that the polymer assisted transfer technique will show great potential for the application of future plasmonic LOF systems.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Recent Progress on Semiconductor-Interface Facing Clinical Biosensing

Semiconductor (SC)-based field-effect transistors (FETs) have been demonstrated as amazing enhancer gadgets due to their delicate interface towards surface adsorption. This leads to their application as sensors and biosensors. Additionally, the semiconductor material has enormous recognizable fixation extends, high affectability, high consistency for solid detecting, and the ability to coordinate with other microfluidic gatherings. This review focused on current progress on the semiconductor-interfaced FET biosensor through the fundamental interface structure of sensor design, including inorganic semiconductor/aqueous interface, photoelectrochemical interface, nano-optical interface, and metal-assisted interface. The works that also point to a further advancement for the trademark properties mentioned have been reviewed here. The emergence of research on the organic semiconductor interface, integrated biosensors with Complementary metal–oxide–semiconductor (CMOS)-compatible, metal-organic frameworks, has accelerated the practical application of biosensors. Through a solid request for research along with sensor application, it will have the option to move forward the innovative sensor with the extraordinary semiconductor interface structure.

Self-Cleaning Polyester Fabric Prepared with TiOF2 and Hexadecyltrimethoxysilane

In this study, self-cleaning polyester (PET) fabrics were prepared using TiOF2 and hexadecyltrimethoxysilane(HDS) treatment. TiOF2 was synthesized via direct fluorination of a precursor TiO2 at various reaction temperatures. The prepared PET fabrics had superior photocatalytic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics under UV and sunlight with 98% decomposition of methylene blue. TiOF2/HDS-treated PET fabrics also had superior superhydrophobic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics with a 161° water contact angle and 6° roll-off angle. After the self-cleaning tests of the non-dyed TiOF2/HDS-treated PET fabrics, we prepared dyed TiOF2/HDS-treated PET fabrics to test practical aspects of the treatment method. These PET fabrics were barely stained by tomato ketchup; even when stained, they could be self-cleaned within 4 h. These results suggest that practical self-cleaning PET fabrics with superhydrophobicity and photocatalytic degradation could be prepared using TiOF2/HDS-treatment.

DNA-Programmed Bimodal 2D Assembly of Differently Sized Nanoparticles via Folding of Precursory Circular Chains

Gold nanoparticle (AuNP) assemblies in two-dimensions (2D) exhibit collective physical/chemical properties that are useful for various devices. However, technical issues still impede the efficient ordering of differently sized AuNPs on solid supports while avoiding phase separation. This paper describes a method to construct binary 2D assemblies by folding precursory circular chains composed of small and large AuNPs. The structural change is caused by a spontaneous, non-cross-linking assembly of fully matched double-stranded DNA-modified AuNPs (dsDNA-AuNPs) at a high ionic strength. Since larger dsDNA-AuNPs have a lower critical coagulation concentration of the supporting electrolyte, the spontaneous assembly of large AuNPs precedes that of small AuNPs in the precursory chain during evaporation. Transmission electron microscopy reveals that alternate-type AuNP chains are folded into a binary 2D structure in a mixed mode, whereas block-type chains are transformed into a binary 2D structure in a core-shell mode. The methodology could potentially be harnessed for the fabrication of binary AuNP arrays for various devices.

Truncated titanium/semiconductor cones for wide-band solar absorbers

A truncated Ti and Si cones metasurface has been proposed for wide-band solar absorber (WSA), which produced a high average absorption of 94.7% in the spectral region from 500 to 4000 nm. A maximal enhancement factor of 166.0% was achieved by the WSA in comparison with the absorption of Ti/Si cylinder resonators based absorber. Under the standard solar radiance, a high full-spectrum solar absorption efficiency of 96.1% was obtained for the WSA in the energy range from 0.28 to 4.0 eV. The spectral bandwidth with absorption above 90% is up to 3.402 μm, which shows an enhancement factor of 165.0% than that of the WSA intercalated by the SiO₂. Other semiconductors such as Ge, GaAs have been utilized to form the WSA, which also maintained the near-unity absorption in the wide-band spectrum. The plasmonic resonant response of the Ti material and the strong electromagnetic coupling capability of the Si resonator, and the plasmonic near-field coupling by the adjacent truncated cones were the main contributions for the impressive absorption behaviors. These findings pave a new way for achieving full-spectrum solar absorber via combining the Ti material and semiconductors, which could open potential approaches for active optoelectronic devices such as photo-detectors, hot-electron related modulators, and solar cells, etc.

Gas sensors using ordered macroporous oxide nanostructures

Detection and monitoring of harmful and toxic gases have gained increased interest in relation to worldwide environmental issues. Semiconducting metal oxide gas sensors have been considered promising for the facile remote detection of gases and vapors over the past decades. However, their sensing performance is still a challenge to meet the demands for practical applications where excellent sensitivity, selectivity, stability, and response/recovery rate are imperative. Therefore, sensing materials with novel architectures and fabrication processes have been pursued with a flurry of research activity. In particular, the preparation of ordered macroporous metal oxide nanostructures is regarded as an intriguing candidate wherein ordered aperture sizes in the range from 50 nm to 1.5 μm can increase the chemical diffusion rate and considerably strengthen the performance stability and repeatability. This review highlights the recent advances in the fabrication of ordered macroporous nanostructures with different dimensions and compositions, discusses the sensing behavior evolution governed by structural layouts, hierarchy, doping, and heterojunctions, as well as considering their general principles and future prospects. This would provide a clear scale for others to tune the sensing performance of porous materials in terms of specific components and structural designs.

Fabrication, Characterization, and Application of Large-Scale Uniformly Hybrid Nanoparticle-Enhanced Raman Spectroscopy Substrates

Surface-enhanced Raman spectroscopy (SERS) substrates with high sensitivity and reproducibility are highly desirable for high precision and even molecular-level detection applications. Here, large-scale uniformly hybrid nanoparticle-enhanced Raman spectroscopy (NERS) substrates with high reproducibility and controllability were developed. Using oxygen plasma treatment, large-area and uniformly rough polystyrene sphere (URPS) arrays in conjunction with 20 nm Au films (AuURPS) were fabricated for SERS substrates. Au nanoparticles and clusters covered the surface of the URPS arrays, and this increased the Raman signal. In the detection of malachite green (MG), the fabricated NERS substrates have high reproducibility and sensitivity. The enhancement factor (EF) of Au nanoparticles and clusters was simulated by finite-difference time-domain (FDTD) simulations and the EF was more than 10⁴. The measured EF of our developed substrate was more than 10⁸ with a relative standard deviation as low as 6.64%–13.84% over 15 points on the substrate. The minimum limit for the MG molecules reached 50 ng/mL. Moreover, the Raman signal had a good linear relationship with the logarithmic concentration of MG, as it ranged from 50 ng/mL to 5 μg/mL. The NERS substrates proposed in this work may serve as a promising detection scheme in chemical and biological fields.

Highly tunable multiple narrow emissions of dyed dielectric-metal core-shell resonators: towards efficient fluorescent labels

We report a potential efficient fluorescent label based on the dyed dielectric-metal core-shell resonators (DMCSRs). By utilizing the near-field coupling between the dyes and the multipolar sharp cavity plasmon resonances, the dyed DMCSRs with diameter of 1.02 μm are demonstrated to be capable of supporting multiple spontaneous emission peaks with the linewidths as narrow as ∼ 10 nm in visible range, and these reshaped fluorescent emissions are insensitive to the surrounding dielectric environment. Furthermore, these multiple narrow emission peaks show a precise tunability on the spectrum by simply separating a nanometric dielectric layer between the dielectric core and the metallic shell, which may provide an attractive spectral multiplexing strategy in the fields of cell biology and medical sciences.

Ordered Array of Metal Particles on Semishell Separated with Ultrathin Oxide: Fabrication and SERS Properties

Metal particles in gap cavities provide an interesting system to achieve hybrid local surface plasmon modes for local field enhancement. Here, we demonstrate a relatively simple method to fabricate Ag nanoparticles positioned on Ag semishells separated by a thin (~5 nm) dielectric layer. The obtained structure can provide strong local electric field enhancement for surface-enhanced Raman scattering (SERS). The fabrication of the ordered array structure was realized by nanosphere self-assembly, atomic layer deposition, and metal thin-film dewetting. Numerical simulation proved that, compared to the conventional metal semishell arrays, the additional Ag particles introduce extra hot spots particularly in the valley regions between adjacent Ag semishells. As a result, the SERS enhancement factor of the metal semishell-based plasmonic structure could be further improved by an order of magnitude. The developed novel plasmonic structure also shows good potential for application in plasmon-enhanced solar water-splitting devices.

Durable Broadband and Omnidirectional Ultra-antireflective Surfaces

Light reflection from surfaces is ubiquitous in nature. Diverse optoelectronic devices need durable, omnidirectional, and transparent ultra-antireflective surfaces. Here, we engineered antireflective transparent surfaces composed of silica nanocaps through a simple thermal treatment of a silica-coated monolayer colloidal crystal template. The relationship between the structure and the antireflective performance of the silica nanocaps was systematically studied both experimentally and numerically. On the basis of the understanding of the structure-antireflection relationships, ultra-antireflection coatings with a transmittance of ∼98.75 ± 0.15% in the visible wavelength range were prepared by fabricating two differently sized silica nanocaps. More importantly, the antireflection of the coatings formed by two differently sized nanocaps demonstrated poor dependence on the angle of the incident light (i.e., omnidirectionality). The reflection is <2.5% even at an incident angle of 60°. The prepared ultra-antireflective silica nanocap coatings outperform state-of-the-art transparent antireflective coatings regarding the antireflection performance, the wavelength range, and the omnidirectionality. The silica nanoshells were welded together with the underlying fused silica. Therefore, they can sustain common mechanical friction and scratching, demonstrating extraordinary mechanical durability as verified by sand abrasion tests. Further, the silanized silica nanocaps turned out to be hydrophobic with an outstanding self-cleaning performance without prominently influencing the transmittance. The durable and omnidirectional ultra-antireflective transparent silica nanocaps will have promising applications in solar energy conversion and storage, displays, optical lenses, and a wide range of optoelectronic devices.

Hierarchical nanopores formed by block copolymer lithography on the surfaces of different materials pre-patterned by nanosphere lithography

Bottom-up patterning techniques allow for the creation of surfaces with ordered arrays of nanoscale features on large areas. Two bottom-up techniques suitable for the formation of regular nanopatterns on different length scales are nanosphere lithography (NSL) and block copolymer (BCP) lithography. In this paper it is shown that NSL and BCP lithography can be combined to easily design hierarchically nanopatterned surfaces of different materials. Nanosphere lithography is used for the pre-patterning of surfaces with antidots, i.e. hexagonally arranged cylindrical holes in thin films of Au, Pt and TiO2 on SiO2, providing a periodic chemical and topographical contrast on the surface suitable for templating in subsequent BCP lithography. PS-b-PMMA BCP is used in the second self-assembly step to form hexagonally arranged nanopores with sub-20 nm diameter within the antidots upon microphase separation. To achieve this the microphase separation of BCP on planar surfaces is studied, too, and it is demonstrated for the first time that vertical BCP nanopores can be formed on TiO2, Au and Pt films without using any neutralization layers. To explain this the influence of surface energy, polarity and roughness on the microphase separation is investigated and discussed along with the wetting state of BCP on NSL-pre-patterned surfaces. The presented novel route for the creation of advanced hierarchical nanopatterns is easily applicable on large-area surfaces of different materials. This flexibility makes it suitable for a broad range of applications, from the morphological design of biocompatible surfaces for life science to complex pre-patterns for nanoparticle placement in semiconductor technology.

Testing gold nanostructures fabricated by hole-mask colloidal lithography as potential substrates for SERS sensors: sensitivity, signal variability, and the aspect of adsorbate deposition

Gold nanoplasmonic substrates with high sensitivity and spectral reproducibility are key components of molecular sensors based on surface-enhanced Raman scattering (SERS). In this work, we used a confocal Raman microscope and several types of gold nanostructures (arrays of nanodiscs, nanocones and nanodisc dimers) prepared by hole-mask colloidal lithography (HCL) to determine the sources of variability in SERS measurements. We demonstrate that significant variations in the SERS signal can originate from the method of deposition of analyte molecules onto a SERS substrate. While the method based on incubation of SERS substrates in a solution containing the analyte yields a SERS signal with low variability, the droplet deposition method produces a SERS signal with rather high variability. Variability of the SERS signal of a single nanoparticle was determined from the statistical analysis of the SERS signal in short-range Raman maps recorded using different sized laser spots produced by means of different objectives. We show that the number of nanoparticles located within the laser spot can be a source of substantial SERS signal variability, especially for high-magnification objectives. We demonstrate that SERS substrates prepared by HCL exhibit high SERS enhancement and excellent homogeneity (about 20% relative standard deviation from short-range maps). The nanocone arrays are shown to provide the highest SERS enhancement, the lowest relative level of fluorescence background, and also slightly better homogeneity when compared with arrays of nanodisc dimers or single nanodiscs.

Approaches to self-assembly of colloidal monolayers: A guide for nanotechnologists

Self-assembly of quasi-spherical colloidal particles in two-dimensional (2D) arrangements is essential for a wide range of applications from optoelectronics to surface engineering, from chemical and biological sensing to light harvesting and environmental remediation. Several self-assembly approaches have flourished throughout the years, with specific features in terms of complexity of the implementation, sensitivity to process parameters, characteristics of the final colloidal assembly. Selecting the proper method for a given application amidst the vast literature in this field can be a challenging task. In this review, we present an extensive classification and comparison of the different techniques adopted for 2D self-assembly in order to provide useful guidelines for scientists approaching this field. After an overview of the main applications of 2D colloidal assemblies, we describe the main mechanisms underlying their formation and introduce the mathematical tools commonly used to analyse their final morphology. Subsequently, we examine in detail each class of self-assembly techniques, with an explanation of the physical processes intervening in crystallization and a thorough investigation of the technical peculiarities of the different practical implementations. We point out the specific characteristics of the set-ups and apparatuses developed for self-assembly in terms of complexity, requirements, reproducibility, robustness, sensitivity to process parameters and morphology of the final colloidal pattern. Such an analysis will help the reader to individuate more easily the approach more suitable for a given application and will draw the attention towards the importance of the details of each implementation for the final results.

Deposition of Gold Nanotriangles in Large Scale Close-Packed Monolayers for X-ray-Based Temperature Calibration and SERS Monitoring of Plasmon-Driven Catalytic Reactions

Anisotropic plasmonic particles such as gold nanotriangles have extraordinary structural, optical, and physicochemical properties. For many applications in different fields, it is essential to prepare them in a chemically and physically stable, structurally well-defined manner, e.g., as large and uniform coverage on a substrate. We present a direct method for the large scale close-packed monolayer formation of edge-to-edge ordered, ultrathin crystalline gold nanotriangles on Si wafers or quartz glass via the transfer of these asymmetric particles to the air-liquid interface after adding ethanol-toluene mixtures without any subsequent surface functionalization. X-ray diffraction monitoring of the close-packed, large area monolayer with a mosaicity of less than 0.1° allows for calibrating the temperature of the particles during continuous laser heating. This is important for characterizing the microscopic temperature of the metal particles in the plasmon-driven dimerization process of 4-nitrothiophenol (4-NTP) into 4,4'-dimercaptoazobenzene (DMAB), monitored in real time by surface-enhanced Raman scattering (SERS). The gold nanotriangles can act as a source of hot electrons and initiate the dimerization process.

Label-free colorimetric detection of tetracycline using analyte-responsive inverse-opal hydrogels based on molecular imprinting technology

Analyte-responsive inverse-opal hydrogels based on molecular imprinting technology were fabricated for selective, sensitive, and label-free colorimetric detection of tetracycline.

Wafer-scale fabrication of a Cu/graphene double-nanocap array for surface-enhanced Raman scattering substrates

A novel Cu/graphene double-nanocap array is developed via low-temperature CVD to serve as a highly sensitive, reproducible and stable SERS platform.

Effective SERS-active substrates composed of hierarchical micro/nanostructured arrays based on reactive ion etching and colloidal masks

A facile route has been proposed for the fabrication of morphology-controlled periodic SiO2 hierarchical micro/nanostructured arrays by reactive ion etching (RIE) using monolayer colloidal crystals as masks. By effectively controlling the experimental conditions of RIE, the morphology of a periodic SiO2 hierarchical micro/nanostructured array could be tuned from a dome-shaped one to a circular truncated cone, and finally to a circular cone. After coating a silver thin layer, these periodic micro/nanostructured arrays were used as surface-enhanced Raman scattering (SERS)-active substrates and demonstrated obvious SERS signals of 4-Aminothiophenol (4-ATP). In addition, the circular cone arrays displayed better SERS enhancement than those of the dome-shaped and circular truncated cone arrays due to the rougher surface caused by physical bombardment. After optimization of the circular cone arrays with different periodicities, an array with the periodicity of 350 nm exhibits much stronger SERS enhancement and possesses a low detection limit of 10(-10) M 4-ATP. This offers a practical platform to conveniently prepare SERS-active substrates.

Self-Assembly of Single-Sized and Binary Colloidal Particles at Air/Water Interface by Surface Confinement and Water Discharge

We present an innovative apparatus allowing self-assembly at air/water interface in a smooth and reproducible way. The combination of water discharge and surface confinement of the area over which self-assembly takes place allows transfer of the assembled monolayer without any risk of damage to the colloidal crystal. As we demonstrate, the designed approach offers remarkable advantages in terms of cost and robustness compared to state-of-the art methods and is suitable for the fabrication of highly ordered monolayers even for more challenging assembly experiments such as transfer on rough substrates or assembly of binary colloids. Hence, our apparatus represents a significant headway toward high scale production of large area colloidal crystals. For the binary colloid assembly experiments, we also report the first experimental demonstration of a morphology based on the alternation of three and four small particles in the interstices between large particles.

Fabrication of Superhydrophobic and Luminescent Rare Earth/Polymer complex Films

The motivation of this work is to create luminescent rare earth/polymer films with outstanding water-resistance and superhydrophobicity. Specifically, the emulsion polymerization of styrene leads to core particles. Then core-shell-structured polymer nanoparticles are synthesized by copolymerization of styrene and acrylic acid on the core surface. The coordination reaction between carboxylic groups and rare earth ions (Eu³⁺ and Tb³⁺) generates uniform spherical rare earth/polymer nanoparticles, which are subsequently complexed with PTFE microparticles to obtain micro-/nano-scaled PTFE/rare earth films with hierarchical rough morphology. The films exhibit large water contact angle up to 161° and sliding angle of about 6°, and can emit strong red and green fluorescence under UV excitation. More surprisingly, it is found that the films maintain high fluorescence intensity after submersed in water and even in aqueous salt solution for two days because of the excellent water repellent ability of surfaces.

Heat-Resistant Crack-Free Superhydrophobic Polydivinylbenzene Colloidal Films

Highly cross-linked poly(divinylbenzene) (PDVB) spherical colloidal particles with nano-, submicron-, and micron-sizes of 157.2 nm, 602.1 nm, and 5.1 μm were synthesized through emulsion and dispersion polymerization methods. The influences of particle size on the surface morphology, roughness, superhydrophobicity, and critical cracking thickness of colloidal films were studied in detail. The results show that PDVB colloidal films possess large water contact angle (CA) over 151°, belonging to superhydrophobic materials. Moreover, it is interesting to observe that the highly cross-linked network structure leads to PDVB film's excellent heat-resistance. The CA and rough surface morphology remain nearly unchanged after thermal-treatment of films at 150 °C for 24 h. In addition, no cracks were observed in films with thicknesses up to 8.1 μm, exceeding most of polymer and inorganic particle films reported in the literature. The simple and scalable preparation method, low-cost, superhydrophobicity, and excellent thermal stability endow the PDVB colloidal films with promising applications in advanced coating fields, especially when employed in the high-temperature service environment.

Stimulation of Early Osteochondral Differentiation of Human Mesenchymal Stem Cells Using Binary Colloidal Crystals (BCCs)

A new surface based on self-assembly of two colloids into well-defined nanostructures, so-called binary colloidal crystals (BCCs), was fabricated for stem cell culture. The facile fabrication process are able to cover large surface areas (>3 cm-diameter, i.e. > 7 cm(2)) with ordered surface nanotopographies that is often a challenge particularly in biomaterials science. From our library, four different combinations of BCCs were selected using mixtures of silica, polystyrene and poly(methyl methacrylate) particles with sizes in the range from 100 nm to 5 μm. Cell spreading, proliferation, and surface-induced lineage commitment of human adipose-derived stem cells (hADSCs) was studied using quantitative real time polymerase chain reaction (qRT-PCR) and immunostaining. The results showed that BCCs induced osteo- and chondro- but not adipo-gene expression in the absence of induction medium suggesting that the osteochondral lineage can be stimulated by the BCCs. When applying induction media, higher osteo- and chondro-gene expression on BCCs was found compared with tissue culture polystyrene (TCPS) and flat silica (Si) controls, respectively. Colony forming of chondrogenic hADSCs was found on BCCs and TCPS but not Si controls, suggesting that the differentiation of stem cells is surface-dependent. BCCs provide access to complex nanotopographies and chemistries, which can find applications in cell culture and regenerative medicine.

Recent advancement on micro-/nano-spherical lens photolithography based on monolayer colloidal crystals

Highly ordered nanostructures have gained substantial interest in the research community due to their fascinating properties and wide applications.Micro-/nano-spherical lens photolithography (SLPL) has been recognized as an inexpensive, inherently parallel, and high-throughput approach to the creation of highly ordered nanostructures. SLPL based on monolayer colloidal crystals (MCCs) of self-assembled colloidal micro-/nano-spheres have recently made remarkable progress in overcoming the constraints of conventional photolithography in terms of cost, feature size, tunability, and pattern complexity. In this review, we highlight the current state-of-the-art in this field with an emphasis on the fabrication of a variety of highly ordered nanostructures based on this technique and their demonstrated applications in light emitting diodes, nano-patterning semiconductors, and localized surface plasmon resonance devices. Finally, we present a perspective on the future development of MCC-based SLPL technique, including a discussion on the improvement of the quality of MCCs and the compatibility of this technique with other semiconductor micromachining process for nanofabrication.

Quantitative Characterization of Mechanical Property of Annealed Monolayer Colloidal Crystal

Quantitative characterization of the mechanical properties of a polystyrene (PS) monolayer colloidal crystal (MCC) annealed with solvent vapor has been performed for the first time by means of atomic force microscopy nanoindentation. The results showed that both the compressive and bending elastic modulus of PS MCC increased with the prolongation of annealing time from initial to 13 min. When the annealing time reached 15 min or even more, the PS MCC almost deformed to a planar film, and the elastic modulus of the PS MCC presented a drastic increase. These results provide a basis for tailoring the mechanical properties of a polymer colloidal monolayer via solvent vapor annealing. Such self-supported and high-mechanical-strength colloidal monolayers can be transferred to other surfaces for potential and promising applications in the bottom-up fabrication of highly ordered nanostructured materials such as nano dot arrays, photonic crystals, and many others.

Facile fabrication of an underwater superoleophobic mesh for effective separation of oil/simulated seawater mixtures

The underwater superoleophobic meshes can efficiently separate oil/simulated seawater mixture and exhibit excellent environmental stability.

Inspired smart materials with external stimuli responsive wettability: a review

Recent progress in smart surfaces with responsive wettability upon external stimuli is reviewed and some of the barriers and potentially promising breakthroughs in this field are also briefly discussed.

Magnetically modulated critical current densities of Co/Nb hybrid

By tuning morphology and size of magnetic subsystem, ferromagnet-superconductor (F/S) hybrid system provides an effective way to modulate superconductivity due to the interaction between superconducting and magnetic-order parameters at the mesoscopic length scale. In this work, we report on investigations of critical current density in a large-area Co/Nb hybrid via facile colloidal lithography. Here, Co hexagon shell array as a magnetic template build on Nb film to modulate the critical current density. A novel superconducting transition has been observed in I-V curve with two metastable transition states: double-transition and binary-oscillation-transition states. Importantly, such unusual behavior can be adjusted by temperature, magnetic field and contact area of F/S. Such hybrid film has important implications for understanding the role of magnetic subsystem modulating superconductivity, as well as applied to low-energy electronic devices such as superconducting current fault limiters.

Femtosecond laser controlled wettability of solid surfaces

Femtosecond laser microfabrication is emerging as a hot tool for controlling the wettability of solid surfaces. This paper introduces four typical aspects of femtosecond laser induced special wettability: superhydrophobicity, underwater superoleophobicity, anisotropic wettability, and smart wettability. The static properties are characterized by the contact angle measurement, while the dynamic features are investigated by the sliding behavior of a liquid droplet. Using different materials and machining methods results in different rough microstructures, patterns, and even chemistry on the solid substrates. So, various beautiful wettabilities can be realized because wettability is mainly dependent on the surface topography and chemical composition. The distinctions of the underlying formation mechanism of these wettabilities are also described in detail.

Control of Separation and Diameter of Ag Nanorods through Self-organized Seeds

This paper proposes a mechanism of controlling the diameter and separation of metallic nanorods from physical vapor deposition through self-organized seeds and experimentally demonstrates the feasibility using Ag as the prototype metal, In as the seed, and Si the substrate. Being non-wetting on Si substrates, deposited In atoms self-organize into islands. Subsequently deposited Ag atoms attach to In islands, rather than to Si substrates, due to preferential bonding and geometrical shadowing. The experimental results show that self-organized In seeds of 5 nm nominal thickness give rise to the best separation and the smallest diameter of Ag nanorods.

Converting 2D inorganic-organic ZnSe-DETA hybrid nanosheets into 3D hierarchical nanosheet-based ZnSe microspheres with enhanced visible-light-driven photocatalytic performances

Engineering two-dimensional (2D) nanosheets into three-dimensional (3D) hierarchical structures is one of the great challenges in nanochemistry and materials science. We report a facile and simple chemical conversion route to fabricate 3D hierarchical nanosheet-based ZnSe microspheres by using 2D inorganic-organic hybrid ZnSe-DETA (DETA = diethylenetriamine) nanosheets as the starting precursors. The conversion mechanism involves the controlled depletion of the organic-component (DETA) from the hybrid precursors and the subsequent self-assembly of the remnant inorganic-component (ZnSe). The transformation reaction of ZnSe-DETA nanosheets is mainly influenced by the concentration of DETA in the reaction solution. We demonstrated that this organic-component depletion method could be extended to the synthesis of other hierarchical structures of metal sulfides. In addition, the obtained hierarchical nanosheet-based ZnSe microspheres exhibited outstanding performance in visible light photocatalytic degradation of methyl orange and were highly active for photocatalytic H2 production.

Exploration and exploitation of water in colloidal crystals

Water on solid surfaces is ubiquitously found in nature, in most cases due to mere adsorption from ambient moisture. Because porous structures have large surfaces, water may significantly affect their characteristics. This is particularly obvious in systems formed by separate particles, whose interactions are strongly influenced by small amounts of liquid. Water/solid phenomena, like adsorption, condensation, capillary forces, or interparticle cohesion, have typically been studied at relatively large scales down to the microscale, like in wet granular media. However, much less is known about how water is confined and acts at the nanoscale, for example, in the interstices of divided systems, something of utmost importance in many areas of materials science nowadays. With novel approaches, in-depth investigations as to where and how water is placed in the nanometer-sized pores of self-assembled colloidal crystals have been made, which are employed as a well-defined, versatile model system with useful optical properties. In this Progress Report, knowledge gained in the last few years about water distribution in such nanoconfinements is gathered, along with how it can be controlled and the consequences it brings about to extract new or enhance existing material functionalities. New methods developed and new capabilities of standard techniques are described, and the water interplay with the optical, chemical, and mechanical properties of the ensemble are discussed. Some lines for applicability are also highlighted and aspects to be addressed in the near future are critically summarized.

Two-dimensional photonic crystal chemical and biomolecular sensors

We review recent progress in the development of two-dimensional (2-D) photonic crystal (PC) materials for chemical and biological sensing applications. Self-assembly methods were developed in our laboratory to fabricate 2-D particle array monolayers on mercury and water surfaces. These hexagonal arrays strongly forward Bragg diffract light to report on their array spacings. By embedding these 2-D arrays onto responsive hydrogel surfaces, 2-D PC sensing materials can be fabricated. The 2-D PC sensors utilize responsive polymer hydrogels that are chemically functionalized to show volume phase transitions in selective response to particular chemical species. Novel hydrogels were also developed in our laboratory by cross-linking proteins while preserving their native structures to maintain their selective binding affinities. The volume phase transitions swell or shrink the hydrogels, which alter their 2-D array spacings, and shift their diffraction wavelengths. These shifts can be visually detected or spectrally measured. These 2-D PC sensing materials have been used for the detection of many analytes, such as pH, surfactants, metal ions, proteins, anionic drugs, and ammonia. We are exploring the use of organogels that use low vapor pressure ionic liquids as their mobile phases for sensing atmospheric analytes.