Molecular architectures of multi-anthracene assemblies

Factors that Impact Photochemical Cage Escape Yields

The utilization of visible light to mediate chemical reactions in fluid solutions has applications that range from solar fuel production to medicine and organic synthesis. These reactions are typically initiated by electron transfer between a photoexcited dye molecule (a photosensitizer) and a redox-active quencher to yield radical pairs that are intimately associated within a solvent cage. Many of these radicals undergo rapid thermodynamically favored "geminate" recombination and do not diffuse out of the solvent cage that surrounds them. Those that do escape the cage are useful reagents that may undergo subsequent reactions important to the above-mentioned applications. The cage escape process and the factors that determine the yields remain poorly understood despite decades of research motivated by their practical and fundamental importance. Herein, state-of-the-art research on light-induced electron transfer and cage escape that has appeared since the seminal 1972 review by J. P. Lorand entitled "The Cage Effect" is reviewed. This review also provides some background for those new to the field and discusses the cage escape process of both homolytic bond photodissociation and bimolecular light induced electron transfer reactions. The review concludes with some key goals and directions for future research that promise to elevate this very vibrant field to even greater heights.

Narcissistic self-sorting in Zn(II) porphyrin derived semiconducting nanostructures

The narcissistic self-sorted phenomenon is explicitly attributed to the structural similarities in organic molecules. Although such relevant materials are rarely explored, self-sorted structures from macrocyclic π-conjugated-based p- and n-type organic semiconductors facilitate the increase of exciton dissociation and charge separation in bulk heterojunction solar cells. Herein, we report two extended π-conjugated derivatives consisting of zinc-porphyrin-linked benzothiadiazole acting as an acceptor (PB) and anthracene as a donor (PA). Despite having the same porphyrin π-conjugated core in PA and PB, variations in donor and acceptor moieties make the molecular packing form one-dimensional (1D) self-assembled nanofibers via H- and J-type aggregates. Interestingly, a dissimilar aggregate of PA and PB exists as a mixture (PA + PB), promoting narcissistic self-sorted structures. Electrochemical impedance investigation reveals that the electronic characteristics of self-sorting assemblies are influenced by the difference in electrostatic potentials for PA and PB, resulting in a transitional electrical conductivity of 0.14 S cm-1. Therefore, the design of such materials for the fabrication of effective photovoltaics is promoted by these extraordinary self-sorted behaviors in comparable organic π-conjugated molecules.

Controllable π-π coupling of intramolecular dimer models in aggregated states

π-π coupling as a common interaction plays a key role in emissions, transport and mechanical properties of organic materials. However, the precise control of π-π coupling is still challenging owing to the possible interference from other intermolecular interactions in the aggregated state, usually resulting in uncontrollable emission properties. Herein, with the rational construction of intramolecular dimer models and crystal engineering, π-π coupling can be subtly modulated by conformation variation with balanced π-π and π-solvent interactions and visualized by green-to-blue emission switching. Moreover, it can rapidly respond to temperature, pressure and mechanical force, affording a facile way to modulate π-π coupling in situ. This work contributes to a deeper understanding of the internal mechanism of molecular motions in aggregated states.

Increasing Chemical Diversity of B2 N2 Anthracene Derivatives by Introducing Continuous Multiple Boron-Nitrogen Units

Increasing the chemical diversity of organic semiconductors is essential to develop efficient electronic devices. In particular, the replacement of carbon-carbon (C-C) bonds with isoelectronic boron-nitrogen (B-N) bonds allows precise modulation of the electronic properties of semiconductors without significant structural changes. Although some researchers have reported the preparation of B2 N2 anthracene derivatives with two B-N bonds, no compounds with continuous multiple BN units have been prepared yet. Herein, we report the synthesis and characterization of a B2 N2 anthracene derivative with a BNBN unit formed by converting the BOBN unit at the zigzag edge. Compared to the all-carbon analogue 2-phenylanthracene, BNBN anthracene exhibits significant variations in the C-C bond length and a larger highest occupied molecular orbital-lowest unoccupied molecular orbital energy gap. The experimentally determined bond lengths and electronic properties of BNBN anthracene are confirmed through theoretical calculations. The BOBN anthracene organic light-emitting diode, used as a blue host, exhibits a low driving voltage. The findings of this study may facilitate the development of larger acenes with multiple BN units and potential applications in organic electronics.

Nitrogen Atom Induced Contrast Effect on the Mechanofluorochromic Characteristics of Anthracene-Based Acceptor-Donor-Acceptor Fluorescent Molecules

The mechanofluorochromic (MFC) characteristics of anthracene-based acceptor-donor-acceptor (A-D-A) fluorescent molecules are explored through a comprehensive investigation of their photophysical behaviors. Six 9,10-diheteroarylanthracene derivatives with varying acceptor groups (pyridin-4-yl, pyridin-3-yl, pyridin-2-yl, pyrimidin-5-yl, pyrazinyl and quinoxalinyl) are synthesized and systematically characterized. The photophysical properties in both solution and solid-state are examined, revealing subtle yet significant influences of the spatial arrangement and number of nitrogen atoms within the acceptor group on fluorescence emission. Single-crystal structures of these compounds provide insights into their steric configurations and intermolecular packing modes, offering valuable insights into the fundamental mechanisms that underlie the observed MFC properties. This study illuminates the intricate interplay between MFC properties and the refined molecular structure, thus presenting promising avenues for the design and advancement of novel MFC materials.

Drastic Photoemission Color Alternation from a Single Molecule as a Starting Material Introduced in Acid-Treated Zeolites: From Pure Blue to White

Since high-purity blue- and white-light emitters are an indispensable group of materials for the creation of next-generation optical devices, a number of light-emitting materials have been developed from both inorganic and organic synthetic chemistry. However, these synthetic chemical methods are far from the perspective of green chemistry due to the multistep synthetic process and the use of toxic reagents and elements. Herein, we demonstrate that the introduction of simple unsubstituted anthracenes into zeolite-like pores can create a wide variety of luminescent materials, from ultrapure blue luminescent materials (emission peak at 465 nm with a full width of half-maximum of 8.57 nm) to efficient white luminescent materials [CIE coordination at (0.31, 0.33) with a quantum efficiency of 11.0% under 350 nm excitation light]. The method for rational design of the luminescent materials consists of the following two key strategies: one is molecular orbital confinement of the anthracene molecules in the zeolite nanocavity for regulating the molecular coordination associated with photoexcitation and emission and the other is the interaction of unsubstituted anthracenes with extra-framework aluminum species to stabilize the 2-dehydride anthracene cation in the zeolite cavity.

Systematic Order-Made Synthesis of Sequence-Defined Polyurethanes with Length, Types, and Topologies

Polyurethanes are industrially and academically important as soft materials. They are conventionally synthesized by a process based on step-growth polymerization; thus, molecular weight and structural control are impossible. However, the development of a synthetic strategy for polyurethanes remains a big challenge in designing soft materials. Herein, we demonstrate a synthetic methodology for generating polyurethanes with selectable lengths and termini characteristics. The multistep synthetic process offered the systematic synthesis of high-molecular weight, regioregular, and α,ω-urethane telechelics. Various oligomers with order-made repeating units revealed the effective length of the polymer properties. To demonstrate the scope of our methodology, it was also applied to the synthesis of block co-oligomers, three-armed star oligomers, and miktoarm star co-oligomers. Thus, our method allows the synthesis of high-molecular-weight oligomers with complete structural and molecular weight control, which is of enormous value to materials science; particularly the study and application of structure-property relationships in polyurethanes.

A Fluorescent Three-Dimensional Covalent Organic Framework Formed by the Entanglement of Two-Dimensional Sheets

Herein, we report the introduction of steric hindrance in molecular building blocks to prevent π···π stacking, thus allowing two-dimensional (2D) covalent organic sheets to form three-dimensional (3D) covalent organic frameworks (COFs) through entanglement. Starting from the rationally designed precursors containing a bulky anthracene unit in the vertical direction, a highly crystalline COF (3D-An-COF) was successfully synthesized. Very interestingly, 3D-An-COF was determined as an entangled 2D square net (sql) structure, and the high-resolution data (1.1 Å) obtained by the continuous rotation electron diffraction technique allowed us to directly locate all non-hydrogen atoms. Structurally, the presence of an anthracene group outside the C2h symmetry plane strongly reduces the π···π interactions and promotes the formation of square entanglements. In addition, 3D-An-COF is fluorescent and can be used as a sensor to detect the trace amount of antibiotics in water. This study provides a new strategy for the structural diversification of 3D COFs and will certainly motivate us to construct more entangled COFs for interesting applications in the future.

π-Stacking among the Anthracenyl Groups of a Copper Complex Resulted in Doubling of Unit Cell Volume To Provide New Polymorphs

Two polymorphs of the 9-N-(3-imidazolylpropylamino)methylanthracene (Hanthraimmida) containing hydrated copper(II)-2,6-pyridinedicarboxylate complex are reported. The two polymorphs have either lamellar or Herringbone arrangements of π-stacks among the anthracenyl groups of organocation. The difference between the two polymorphs originated from having face-to-face stacking arrangements between the two anthracenyl groups of the symmetry independent cations within the unit cell in one of the polymorphs. The π-stacked anthracenyl groups in consecutive layers of the polymorphs are oriented in one direction in the polymorph designated as P1, whereas the polymorph designated as P2 has such orientations in opposite directions. The unit cell volume of the polymorph P2 (Z = 4) has approximately twice the volume of the polymorph P1 (Z = 2); it happend due to coalescence of two unit cells of P1 in the ab-crystallographic plane. A mixed methanol/water solvate of the copper complex is also reported. It has a channel-like arrangement of the cations; has the anions and the solvents within the cation embraced channel-like enclosures. This complex is unstable, once taken out from the methanol solvent, it transforms in real time to P2 by replacements of the methanol molecules by water molecules.

Synthesis of an Adaptable Molecular Barrel and Guest Mediated Stabilization of Its Metastable Higher Homologue

Structural and functional modulation of three-dimensional artificial macromolecular systems is of immense importance. Designing supramolecular cages that can show stimuli mediated reversible switching between higher-order structures is quite challenging. We report here construction of a Pd₆ trifacial barrel (1) by coordination self-assembly. Surprisingly, barrel 1 was found to exhibit guest-responsive behavior. In presence of fullerenes C₆₀ and C₇₀, 1 unprecedentedly transformed to its metastable higher homologue Pd₈ tetrafacial barrel (2), forming stable host-guest complexes (C₆₀)₃⊂2 and (C₇₀)₂⊂2, respectively. Again, encapsulated fullerenes could be extracted from the cavity of 2 using 1,2-dichlorobenzene, leading to its facile conversion to the parent trifacial barrel 1. Such reversible structural interconversion between an adaptable molecular barrel and its guest stabilized higher homologue is an uncommon observation.

Control of reactivity and selectivity in isomerization and rearrangement reactions inside confined spaces

In the confined space of supramolecular systems, the substrate can be forced into a reactive conformation and labile intermediates may be stabilized while isolated from the bulk solution. In this highlight, unusual processes mediated by supramolecular hosts are described. These include unfavourable conformational equilibria, unusual product selectivities in bond and ring-chain isomerizations, accelerated rearrangement reactions through labile intermediates, and encapsulated oxidations. In the host, controlled or altered isomerization of the guests can occur via hydrophobic, photochemical and thermal interventions. The inner spaces of the hosts resemble enzyme cavities that stabilize labile intermediates not accessible in the bulk solvent. The effects of confinement and the binding forces involved are discussed and further applications are suggested.

Two anthracene-based zirconium metal-organic frameworks with fcu and hcp topologies as versatile fluorescent sensors for detection of inorganic ions and nitroaromatics

Two anthracene-based zirconium metal-organic frameworks (UiO-68-AN-fcu and UiO-68-AN-hcp) with blue emission were synthesized by the solvothermal reaction of ZrCl₄ with anthracene-based ligand 4,4'-(9,10-anthracenediyl)dibenzoic acid. The two MOFs inherited the luminescence properties of anthracene-based ligand and exhibited different topologies due to the change of connection mode of Zr-O clusters. The two stable anthracene-based zirconium MOFs served as luminescent sensors for selectively detecting 2-nitrophenol, Fe³⁺ and Cr₂O₇^2-. UiO-68-AN-hcp with flower morphology exhibited stronger quenching effect for 2-nitrophenol, Fe³⁺ and Cr₂O₇^2- by comparing to UiO-68-AN-fcu. Adsorption tests, fluorescence lifetime and spectroscopy studies demonstrated that the fluorescence responses of MOFs for analytes can be primarily attributed to the dynamic quenching mechanism involving energy and electron transfer. These results revealed that the combination of luminescent anthracene-based ligand and Zr-O clusters is a feasible strategy to construst MOFs-based fluorescent sensors.

Tailor-Made Pdn L2n Metal-Organic Cages through Covalent Post-Synthetic Modification

Post-synthetic modification (PSM) is an effective approach for the tailored functionalization of metal-organic architectures, but its generalizability remains challenging. Herein we report a general covalent PSM strategy to functionalize Pd_n L_2n metal-organic cages (MOCs, n=2, 12) through an efficient Diels-Alder cycloaddition between peripheral anthracene substituents and various functional motifs bearing a maleimide group. As expected, the solubility of functionalized Pd₁₂ L₂₄ in common solvents can be greatly improved. Interestingly, concentration-dependent circular dichroism and aggregation-induced emission are achieved with chiral binaphthol (BINOL)- and tetraphenylethylene-modified Pd₁₂ L₂₄ , respectively. Furthermore, Pd₁₂ L₂₄ can be introduced with two different functional groups (e.g., chiral BINOL and achiral pyrene) through a step-by-step PSM route to obtain chirality-induced circularly polarized luminescence. Moreover, similar results are readily observed with a smaller Pd₂ L₄ system.

Synthesis and reactivity of 9,10-bis(4-trimethylsilylethynylbuta-1,3-diynyl)anthracene derived chromophores

9,10-Bis(4-trimethylsilylethynylbutadiynyl)anthracene is readily availabe from the reaction of anthraquinone and LiCCCCSiMe₃ followed by reduction with Sn(II) and serves as a convenient building block via desilylation and palladium-mediated C-C coupling processes for the construction of further butadiynylanthracenes terminated by metal complexes, arenes, haloarenes and alkynyl functionalities.

Semiconducting mineral induced photochemical conversion of PAHs in aquatic environment: Mechanism study and fate prediction

Semiconducting minerals (such as iron sulfides) are highly abundant in surface water, but their influences on the natural photochemical process of contaminants are still unknown. By simulating the natural water environment under solar irradiation, this work comprehensively investigated the photochemical processes of anthracene (a typical Polycyclic Aromatic Hydrocarbons) in both freshwater and seawater. The results show that the natural pyrite (NP) significantly promotes the degradation of anthracene under solar illumination via 1) NP induced photocatalytic degradation of anthracene, and 2) Fenton reaction due to the NP induced photocatalytic generation of H₂O₂. The material characterization and theoretical calculation reveal that the natural impurity in NP enlarges its band gap, which limits the utilization of solar spectra to shorter wavelength. The contribution of generated reactive intermediates on anthracene degradation follows the order of ¹O₂ >OH > O₂^- in freshwater and O₂^- >¹O₂ >OH in seawater. The photochemically generated H₂O₂ is a vital source for OH generation (from Fenton reaction). The steady-state concentration of OH, ¹O₂ and O₂^- in freshwater were monitored as 3.0 × 10^-15 M, 1.1 × 10^-13 M, and 4.5 × 10^-14 M, respectively. However, the OH concentration in seawater can be negligible due to the quenching effects by halides, and the ¹O₂ and O₂^- concentrations are higher than that in freshwater. An anthracene degradation kinetic model was built based on the experimentally determined reactive intermediates concentration and its second order rate constant with anthracene. Moreover, the anthracene degradation pathway was proposed based on intermediates analysis and DFT calculation, and its toxicity evolution during the photochemical process was assessed by quantitative structure-activity relationship (QSAR) based prediction. This finding suggests that the natural semiconducting minerals can affect the fate and environmental risks of contaminants in natural water.

Dibenzotropylium-Capped Orthogonal Geometry Enabling Isolation and Examination of a Series of Hydrocarbons with Multiple 14π-Aromatic Units

A series of six dications composed of pure hydrocarbons with one to six non-substituted 9,10-anthrylene units end-capped with two dibenzotropyliums were designed and synthesized to elucidate the electronic properties of huge oligo(9,10-anthrylene) backbones. Their structures were successfully determined by X-ray analyses even in the case of eight planar 14π-electron units, revealing that all dications adopt almost orthogonally twisted structures between neighboring units. Spectroscopic and voltammetric analyses show that neither the significant overlap of orbitals nor the delocalization of electrons between 14π-electron units occurs due to the orthogonally twisted geometry even in solution. As a result, sequential oxidation processes were observed with the reversible formation of multivalent cations with the release of the same number of electrons as the number of anthrylene units. Upon two-electron reduction, a closed-shell butterfly-shaped form was obtained from the dication containing one anthrylene unit, whereas open-shell twisted biradicals were isolated as stable entities in the cases of derivatives containing three to six anthrylene units. Notably, from the derivative with two anthrylene units, a metastable open-shell isomer was obtained quantitatively and underwent slow thermal conversion to the most stable closed-shell isomer (E_a = 23.1 kcal mol^-1). There is a drastic change in oxidation potentials between two neutral species (ΔE = 1.32 V in CH₂Cl₂). Since the present dications were regenerated upon oxidation of the isolated reduction products, these systems may contribute to the development of advanced response systems capable of switching color, magnetic properties, and oxidative properties by using a "cation-capped orthogonal geometry".

Aromatic micelles: toward a third-generation of micelles

Micelles are useful and widely applied molecular assemblies, formed from amphiphilic molecules, in water. The majority of amphiphiles possess an alkyl chain as the hydrophobic part. Amphiphiles bearing hydrophilic and hydrophobic polymer chains generate so-called polymeric micelles in water. This review focuses on the recent progress of "aromatic micelles", formed from bent polyaromatic/aromatic amphiphiles, for the development of third-generation micelles. Thanks to multiple host-guest interactions, e.g., the hydrophobic effect and π-π/CH-π interactions, the present micelles display wide-ranging uptake abilities toward various hydrophobic compounds in water. In addition to such host functions, new stimuli-responsive aromatic micelles with pH, light, and redox switches, aromatic oligomer micelles, saccharide-coated aromatic micelles, and related cycloalkane-based micelles were recently developed by our group.

Anion-Coordination-Driven Assembly: From Discrete Supramolecular Self-Assemblies to Functional Soft Materials

Anion templated assembly of supramolecular systems has been extensively explored in previous reports, whereas anions serve only as an auxiliary and spectator role. With the development of anion coordination chemistry in recent years, anion coordination-driven assembly (ACDA) has emerged as a new strategy for the construction of supramolecular self-assemblies. Anions are proved to exist as the main actors in the construction of supramolecular architectures, i. e., serve as the coordination center. This Review will focus on the recent progress in anion-coordination-driven assembly of discrete supramolecular architectures, such as helicates, polyhedrons and polygons, and the various applications of 'aniono'-systems. At the end of this Review, we highlight current challenges and opportunities for future research of anion-coordination-driven self-assembly.

Corralarenes: A Family of Conjugated Tubular Hosts

Despite the advances in host-guest chemistry, macrocyclic hosts with deep cavities are far from abundant among the large number of wholly synthetic hosts described in the literature. Herein, we describe the design and synthesis of two new tubular hosts, namely, corral[4]arene and corral[5]arene. The former has been isolated and characterized as two conformational diastereoisomers, one is centrosymmetric and the other asymmetric. The latter, a fivefold symmetrical and flexible host, has also been investigated in detail. It is composed of five 4,4'-dimethoxybiphenyl units bridged by ethynylene linkers at their 2,2'-positions and adopts a pentagonal conformation with a tubular-shaped cavity in the presence of guests. This structure endows corral[5]arene not only with a conjugated backbone, capable of bright fluorescent emission (quantum yield, 56%), but also a deep π-electron-rich aromatic cavity with remarkable conformational flexibility. The adaptive cavity of corral[5]arene allows it to accommodate a wide range of neutral and positively charged electron-deficient guests with different molecular sizes and shapes. Binding constants between this host and these guests in three different nonpolar organic solvents lie in the range of 10³ to 10⁷ M^-1. Moreover, corral[5]arene exhibits dynamic chirality on account of the axes of chirality associated with each of the five biphenyl units and displays first-order transformation as exhibited by circular dichroism in response to the addition of chiral guests. All these stereochemical features render corral[5]arene an attractive host for a variety of supramolecular and nanotechnological applications.

Argentivorous molecules with chromophores: dependence of their fluorescence intensities on the distance between a donor and an acceptor

We have prepared new argentivorous molecules (L2 and L3) having different linker lengths between cyclen and anthracene units. The structures of Ag⁺ complexes with the new ligands were investigated in solution and solid states. The silver(I) ion-induced ¹H NMR and UV-vis spectral changes of L2 and L3 showed the presence of 1 : 1 complexes. The solid-state structures of the Ag⁺ complexes with L2 and L3 are stable 1 : 1 complexes because four aromatic side-arms wrap the Ag⁺ incorporated in the cyclen unit. A photo-induced electron transfer (PET) effect that depends on the length of the linker connecting the nitrogen atoms of cyclen to the chromophore is also investigated. The result indicates a linear (log) correlation between the donor-chromophore average distances of the optimized structures calculated by DFT calculations and fluorescence intensities (log I), and the PET effect becomes ineffective at about 12 Å in this system.

Anthracene Single-Crystal Scintillators for Computer Tomography Scanning

X-ray imaging and computed tomography (CT) technology, as the important non-destructive measurements, can observe internal structures without destroying the detected sample, which are always used in biological diagnosis to detect tumors, pathologies, and bone damages. It is always a challenge to find materials with a low detection limit, a short exposure time, and high resolution to reduce X-ray damage and acquire high-contrast images. Here, we described a low-cost and high-efficient method to prepare centimeter-sized anthracene crystals, which exhibited intense X-ray radioluminescence with a detection limit of ∼0.108 μGy s^-1, which is only one-fifth of the dose typically used for X-ray diagnostics. Additionally, the low absorption reduced the damage in radiation and ensured superior cycle performance. X-ray detectors based on anthracene crystals also exhibited an extremely high resolution of 40 lp mm^-1. The CT scanning and reconstruction of a foam sample were then achieved, and the detailed internal structure could be clearly observed. These indicated that organic crystals are expecting to be leading candidate low-cost materials for low-dose and highly sensitive X-ray detection and CT scanning.

Anthracene-Containing Metallacycles and Metallacages: Structures, Properties, and Applications

Due to its highly conjugated panel-like structure and unique photophysical and chemical features, anthracene has been widely used for fabricating attractive and functional supramolecular assemblies, including two-dimensional metallacycles and three-dimensional metallacages. The embedded anthracenes in these assemblies often show synergistic effects on enhancing the desired supramolecular and luminescent properties. This review focuses on the metallasupramolecular architectures with anthracene-containing building blocks, as well as their applications in host-guest chemistry, stimulus response, molecular sensing, light harvesting, and biomedical science.

Fast, solvent-free synthesis of ferrocene-containing organic cages via dynamic covalent chemistry in the solid state

A simple, solvent-free synthetic protocol towards the synthesis of organic self-assembled macromolecules has been established. By employing mechanochemistry using glassware readily available to every organic chemist, we were able to synthesise three novel organic cage compounds exemplarily and to speed up the synthesis of a ferrocene-containing macrocycle by a factor of 288 compared to the solution-based synthesis. The structural investigation of the newly synthesised cages revealed different modes of connectivity from using ferrocene-containing aldehydes caused by the free rotation of the cyclopentadienyl units against each other. By extending the facile solvent-free synthesis to ball-milling, even compounds that show lower reactivity could be employed in the dynamic covalent formation of organometallic cage compounds. The presented protocol gives access to otherwise inaccessible structures, speeds up general synthetic workflows, and simultaneously reduces the environmental impact of supramolecular syntheses.

Discrete Platinum(II) Metallacycles with Inner- and Outer-Modified 9,10-Distyrylanthracene: Design, Self-Assembly, and Luminescence Properties

To completely unravel the relationship between structures and luminescence properties of inner- and outer-modified metallacycles, two rhombic metallacycles S1 and S2 with 9,10-distyrylanthracene (DSA) were constructed herein via the design of DSA moieties on the inside or outside of metallacycles. Similar building blocks of the two metallacycles led to the same emission wavelengths in a dilute solution. In contrast, their fluorescence emissions in the aggregation and solid states were significantly different and revealed interesting emission behaviors from structures with inner- and outer-modified design. Finally, based on their luminescence properties, a tunable solid-state fluorescence emissive material was easily obtained by the mixing of two supramolecules in different ratios. This unique design suggested that the modified position of fluorophores exerts a key impact on the adjustment of luminescence from a dilute solution to the aggregated state and will be of great significance for the development of luminescent materials based on supramolecules.

Solvent and Counteranion Assisted Dynamic Self-Assembly of Molecular Triangles and Tetrahedral Cages

Self-assembly of naked Pd^II ions separately with newly designed bis(3-pyridyl)benzothiadiazole (L1) and bis(3-pyridyl)thiazolo[5,4-d]thiazole (L2) donors separately, under varying experimental conditions, yielded Pd₄L₈ (L= L1 or L2) tetrahedral cages and their homologous Pd₃L₆ (L= L1 or L2) double-walled triangular macrocycles. The resulting assemblies exhibited solvent, temperature, and counteranion induced dynamic equilibrium. Treatment of L1 with Pd(BF₄)₂ in acetonitrile (ACN) resulted in selective formation of a tetrahedral cage [Pd₄(L1)₈](BF₄)₈ (1a), which is in dynamic equilibrium with its homologue triangle [Pd₃(L1)₆](BF₄)₆ (2a) in dimethyl sulfoxide (DMSO). On the other hand, similar self-assembly using L2 instead of L1 yielded an equilibrium mixture of tetrahedral cage [Pd₄(L2)₈](BF₄)₈ (3a) and triangle [Pd₃(L2)₆](BF₄)₆ (4a) forms in both ACN and DMSO. The assembles were characterized by multinuclear NMR and ESI-MS while the structure of the tetrahedral cage (1a) was determined by single crystal X-ray diffraction. Existence of a dynamic equilibrium between the assemblies in solution has been investigated via variable temperature ¹H NMR. The equilibrium constant K = ([Pd₄L₈]³/[Pd₃L₆]⁴) was calculated at each experimental temperature and fitted with the Van't Hoff equation to determine the standard enthalpy (ΔH°) and entropy (ΔS°) associated with the interconversion of the double-walled triangle to tetrahedral cage. The thermodynamic feasibility of structural interconversion was analyzed from the change in ΔG°, which suggests favorable conversion of Pd₃L₆ triangle to Pd₄L₈ cage at elevated temperature for L1 in DMSO and L2 in ACN. Interestingly, similar self-assembly reactions of L1 and L2 with Pd(NO₃)₂ instead of Pd(BF₄)₂ resulted in selective formation of a tetrahedral cage [Pd₄(L1)₈](NO₃)₈ (1b) and double-walled triangle [Pd₃(L2)₆](NO₃)₆ (4b), respectively.

Caged bulky organic dyes in a polyaromatic framework and their spectroscopic peculiarities

Here we report that the open large cavity of an M2L4 polyaromatic cage can efficiently bind sterically demanding organic dyes with coumarin, perylene bisimide, and porphyrin cores in aqueous solution. The spectroscopic properties of the caged dyes are largely modulated in the cavity.

Selective Encapsulation and Unusual Stabilization of cis-Isomers by a Spherical Polyaromatic Cavity

To explore new cavity functions, we herein employed  cis-trans   stereoisomers   with a N=N, C=C, or C=N unit as guest indicators for a polyaromatic capsule. Thanks to the rigid, spherical cavity with a diameter of ~1 nm, azobenzene and stilbene derivatives are quantitatively encapsulated by the capsule with 100%  cis -selectivity in water. The isomerization of the  cis -azo compound is suppressed against heat and light in the cavity, due to the confinement effect. Furthermore,  C,N -diphenyl imine derivatives are quantitatively encapsulated by the capsule in water and adopt an otherwise unstable  cis -form. The polyaromatic cavity suppresses the hydrolysis of the imines in water, even at elevated temperature, due to the shielding effect. Accordingly, the properties of the  cis-trans   isomers  could be largely altered through supramolecular manipulation.

Breathing Room: Restoring Free Rotation in a Schiff-Base Macrocycle through Endoperoxide Formation

Macrocyclization is a popular method for preparing hosts, but it can have unintended effects, like limiting molecular free rotation to yield mixtures of inseparable isomers. We report a [3 + 3] Schiff-base macrocycle (1) with anthracene bridges. Restricted rotation about the phenyl-anthracene bonds leads 1 to exist as a mixture of conformations (1^C_s and 1^C_3v). Macrocycle 1 was photooxidized to tris(endoperoxide) adduct 4, alleviating restricted rotation. These results were supported by spectroscopic, structural, and computational analyses.

Biomimetic Recognition of Quinones in Water by an Endo-Functionalized Cavity with Anthracene Sidewalls

Selective molecular recognition in water is the foundation of numerous biological functions but is a challenge for most synthetic hosts. We employ the concept of endo-functionalized cavity and the strategy of simultaneous construction to address this issue. The concept and the strategy were demonstrated in the construction of a biomimetic host for selectively recognizing quinones in water. The host was synthesized by joining two pieces of bent anthracene dimer through amide bond formation, affording a deep hydrophobic cavity and inward-directing hydrogen bonding sites. The host can recognize quinones over their close analogues in water, and its association affinity to p-benzoquinone is the highest among all the known hosts and is even comparable to that of the bioreceptor. The binding with an anthraquinone reaches nanomolar affinity. Shielded hydrogen bonding, C-H⋅⋅⋅π, and charge transfer interactions, and the hydrophobic effect are responsible for the high binding affinity and selectivity.

Macrocyclic host molecules with aromatic building blocks: the state of the art and progress

Macrocyclic host molecules play the central role in host-guest chemistry and supramolecular chemistry. The highly structural symmetry of macrocyclic host molecules can meet people's pursuit of aesthetics in molecular design, and generally means a balance of design, synthesis, properties and applications. For macrocyclic host molecules with highly symmetrical structures, building blocks, which could be described as repeat units as well, are the most fundamental elements for molecular design. The structural features and recognition ability of macrocyclic host molecules are determined by the building blocks and their connection patterns. Using different building blocks, different macrocyclic host molecules could be designed and synthesized. With decades of developments of host-guest chemistry and supramolecular chemistry, diverse macrocyclic host molecules with different building blocks have been designed and synthesized. Aromatic building blocks are a big family among the various building blocks used in constructing macrocyclic host molecules. In this feature article, the recent developments of macrocyclic host molecules with aromatic building blocks were summarized and discussed.

Photoreactivity of an Exemplary Anthracene Mixture Revealed by NMR Studies, including a Kinetic Approach

Anthracenes are an important class of acenes. They are being utilized more and more often in chemistry and materials sciences, due to their unique rigid molecular structure and photoreactivity. In particular, photodimerization can be harnessed for the fabrication of novel photoresponsive materials. Photodimerization between the same anthracenes have been investigated and utilized in various fields, while reactions between varying anthracenes have barely been investigated. Here, Nuclear Magnetic Resonance (NMR) spectroscopy is employed for the investigation of the photodimerization of two exemplary anthracenes: anthracene (A) and 9-bromoanthracene (B), in the solutions with only A or B, and in the mixture of A and B. Estimated k values, derived from the presented kinetic model, showed that the dimerization of A was 10 times faster in comparison with B when compounds were investigated in separate samples, and 2 times faster when compounds were prepared in the mixture. Notably, the photoreaction in the mixture, apart from AA and BB, additionally yielded a large amount of the AB mixdimer. Another important advantage of investigating a mixture with different anthracenes is the ability to estimate the relative reactivity for all the reactions under the same experimental conditions. This results in a better understanding of the photodimerization processes. Thus, the rational photofabrication of mix-anthracene-based materials can be facilitated, which is of crucial importance in the field of polymer and material sciences.

Structure and Photophysical Properties of 1,1,2,2-Tetra(1-anthryl)ethane: A C(sp3 )-C(sp3 ) Bond Substituted with Four Anthracene Units

The title aromatic compound comprising four anthracene units was synthesized by the McMurry coupling of di(1-anthryl) ketone as a hydrogenated product in 65 % yield. The molecule forms a C₂ symmetric structure with the ap conformation about the C(sp³ )-C(sp³ ) single bond, as revealed by X-ray analysis and DFT calculations. The UV/vis and fluorescence spectra of this compound were compared with those of anthracene, di(1-anthryl)methane, and 1,2-di(1-anthryl)ethane. The fluorescence spectrum showed a broad emission band at 450 nm having a long lifetime at 21 ns, which was assignable to an excimer-type emission, in contrast to the other reference compounds. The characteristic photophysical property is discussed in terms of the molecular structure with the aid of the noncovalent interaction plots and the conformational analysis.

Molecular Plumbing to Bend Self-Assembling Peptide Nanotubes

Light-induced molecular piping of cyclic peptide nanotubes to form bent tubular structures is described. The process is based on the [4+4] photocycloaddition of anthracene moieties, whose structural changes derived from the interdigitated flat disposition of precursors to the corresponding cycloadduct moieties, induced the geometrical modifications in nanotubes packing that provokes their curvature. For this purpose, we designed a new class of cyclic peptide nanotubes formed by β- and α-amino acids. The presence of the former predisposes the peptide to stack in a parallel fashion with the β-residues aligned along the nanotube and the homogeneous distribution of anthracene pendants.

Bis(β-diketone)-based metallacycles with haloalkane-induced fluorescence enhancement

A series of metallarectangles 1-5 were synthesized by the selective combination of (p-cymene)Ru-corner, bis(β-diketone) arms and bifunctional pyridyl linkers. They exhibited a very rare phenomenon of haloalkane-induced fluorescence enhancement.

Sterics and Hydrogen Bonding Control Stereochemistry and Self-Sorting in BINOL-Based Assemblies

Here we demonstrate how the hydrogen-bonding ability of a BINOL-based dialdehyde subcomponent dictated the stereochemical outcome of its subsequent self-assembly into one diastereomeric helicate form when bearing free hydroxy groups, and another in the case of its methylated congener. The presence of methyl groups also altered the self-sorting behavior when mixed with another, short linear dialdehyde subcomponent, switching the outcome of the system from narcissistic to integrative self-sorting. In all cases, the axial chirality of the BINOL building block also dictated helicate metal center handedness during stereospecific self-assembly. A new family of stereochemically pure heteroleptic helicates were thus prepared using the new knowledge gained. We also found that switching from Fe^II to Zn^II, or the incorporation of a longer linear ligand, favored heteroleptic structure formation.

Mechanofluorochromism with Aggregation-Induced Emission (AIE) Characteristics: A Perspective Applying Isotropic and Anisotropic Force

Organic mechanofluorochromic (MFC) materials (that change their emission under anisotropic and isotropic pressure) have attracted a great attention in recent years due to their promising applications in sensing pressure, storage devices, security inks, three-dimensional (3D) printing, etc. Stimuli-responsive organic materials with aggregation-induced emission (AIE) characteristics would be an interesting class of materials to enrich the chemistry of MFC compounds. A diamond anvil cell (DAC) is a small tool that is employed to generate high and uniform pressure on materials over a small area. This article discusses the relationship between the chemical structure of AIE compounds and the change in emission properties under anisotropic (mechanical grinding) and isotropic (hydrostatic) pressure. The luminescent properties of such materials depend on the molecular rearrangement in the lattice, conformational changes, excited state transitions and weak intermolecular interactions. Hence, studying the change in luminescent property of these compounds under varying pressure will provide a deeper understanding of the excited-state properties of various emissive compounds with stress. The development of such materials and studies into the effect of pressure on their luminescence properties are summarized.

Mechanochemical Release of Non-Covalently Bound Guests from a Polymer-Decorated Supramolecular Cage

Supramolecular coordination cages show a wide range of useful properties including, but not limited to, complex molecular machine-like operations, confined space catalysis, and rich host-guest chemistries. Here we report the uptake and release of non-covalently encapsulated, pharmaceutically-active cargo from an octahedral Pd cage bearing polymer chains on each vertex. Six poly(ethylene glycol)-decorated bipyridine ligands are used to assemble an octahedral PdII6 (TPT)4 cage. The supramolecular container encapsulates progesterone and ibuprofen within its hydrophobic nanocavity and is activated by shear force produced by ultrasonication in aqueous solution entailing complete cargo release upon rupture, as shown by NMR and GPC analyses.

An Air-Stable Organic Radical from a Controllable Photoinduced Domino Reaction of a Hexa-aryl Substituted Anthracene

Air-stable organic radicals and radical ions have attracted great attention for their far-reaching application ranging from bioimaging to organic electronics. However, because of the highly reactive nature of organic radicals, the design and synthesis of air-stable organic radicals still remains a challenge. Herein, an air-stable organic radical from a controllable photoinduced domino reaction of a hexa-aryl substituted anthracene is described. The domino reaction involves a photoinduced [4 + 2] cycloaddition reaction, rearrangement, photolysis, and an elimination reaction; ¹H/¹³C NMR spectroscopy, high resolution mass spectrometry, single-crystal X-ray diffraction, and EPR spectroscopy were exploited for characterization. Furthermore, a photoinduced domino reaction mechanism is proposed according to the experimental and theoretical studies. In addition, the effects of employing push and pull electronic groups on the controllable photoinduced domino reaction were investigated. This article not only offers a new blue emitter and novel air-stable organic radical compound for potential application in organic semiconductor applications, but also provides a perspective for understanding the fundamentals of the reaction mechanism on going from anthracene to semiquinone in such anthracene systems.

Preparation of a Multicarbazole-Based Nanocapsule Capable of Largely Modulating Guest Spectroscopic Properties in Water

A nanocapsule composed of multiple carbazole panels (ca. 12 panels) was quantitatively generated from bent carbazole-based amphiphiles in water. Unlike previously reported macrocycles and coordination cages bearing several carbazole panels, the resultant nanocapsule displays enhanced emissivity and improved electrochemical stability as compared with the monomeric amphiphile. The spectroscopic properties of substituted coumarin and boron-dipyrromethene dyes can be modulated upon encapsulation by the nanocapsule in water. In the cavity, a highly blue-shifted absorption band is observed from largely twisted coumarin dyes and two absorption bands are found from boron-dipyrromethene dimers stacked in an unusual L-shaped fashion. Moreover, the encapsulated dimers exhibit unique excimer-like emission.

Phase-Dependent Reactivity and Host-Guest Behaviors of a Metallo-Macrocycle in Liquid and Solid-State Photosensitized Oxygenation Reactions

The photochemical oxygenation reactions of a host-guest complex, pCp⊂[Ag₂L0](SbF₆)₂ (pCp = [2.2]paracyclophane) have been investigated in solution and in the solid state, using the macrocyclic ligand L0 having four anthracene moieties in the framework. As a result, it was found that the reactivity and host-guest functions show remarkable phase dependence. In solution, the photosensitized oxygenation of all the anthracene moieties of L0 resulted in a fully oxygenated macrocycle [Ag₂L4](SbF₆)₂ as the final product, while simultaneously the guest molecule was dissociated from the macrocyclic cavity. On the other hand, in an amorphous solid of pCp⊂[Ag₂L0](SbF₆)₂ prepared by decomposing single crystals through the removal of the crystalline solvent, the oxygenated site of L0 was significantly controlled to provide a site-selectively oxygenated inclusion complex, pCp⊂[Ag₂L1](SbF₆)₂, possessing a mono-oxygenated C_s-symmetrical macrocyclic skeleton.