Co-exposure to tire wear particles and nickel inhibits mung bean yield by reducing nutrient uptake

Soil and terrestrial contamination with microplastics and nanoplastics has been discussed extensively, while tire wear particles (TWPs) have been largely overlooked. We investigated the root-surface interactions and growth response of mung bean (Vigna radiata L.) plants exposed to tire wear particles (TWPs) (0.05, 0.1, and 0.25% w/w) and nickel sulfate (50 and 100 mg kg-1 NiSO4) alone and in co-exposure scenarios for the full life cycle (105 days) under soil conditions. The results show that TWPs adhered to the root surface and reduced the water and nutrient uptake by the plant, particularly at higher concentrations of TWPs (0.25% w/w), without any observed organic contaminant accumulation in the root tissue. TWPs alone at 0.01, 0.1, and 0.25% (w/w) decreased mung bean yield by 11, 28, and 52%, respectively. Co-exposure to TWPs at 0.01, 0.1 and 0.25% w/w with 100 mg kg-1 NiSO4 decreased yield by 73, 79 and 88%, respectively. However, co-exposure to TWPs at 0.01 and 0.1% w/w with 50 mg kg-1 NiSO4 enhanced the yield by 32% and 7%, respectively. These changes in yield and nutritional aspects appear to be linked to Ni's regulatory influence on mineral homeostasis. Moreover, exposure to NiSO4 at 100 mg kg-1 increased Ni uptake in the root, shoot, and grain by 9, 26, and 20-fold, respectively as compared to the unamended control; this corresponded to increased antioxidant enzyme activity (10-127%) as compared to the control. TWPs caused blockages, significantly reducing plant yield and altering nutrient dynamics, highlighting emerging risks to plant health.

Addressing the Effectiveness and Molecular Mechanism of the Catalytic CO2 Hydration in Aqueous Solutions by Nickel Nanoparticles

Hydration of carbon dioxide in water solution is the rate limiting step for the CO2 mineralization process, a process which is at the base of many carbon capture and utilization (CCU) technologies aiming to convert carbon dioxide to added-value products and mitigate climate change. Here, we present a combined experimental and computational study to clarify the effectiveness and molecular mechanism by which nickel nanoparticles, NiNPs, may enhance CO2 hydration in aqueous solutions. Contrary to previous literature, our kinetic experiments recording changes of pHs, conductivity, and dissolved carbon dioxide in solution reveal a minimal effect of the NiNPs in catalyzing CO2 hydration. Our atomistic simulations indicate that the Ni metal surface can coordinate only a limited number of water molecules, leaving uncoordinated metal sites for the binding of carbon dioxide or other cations in solution. This deactivates the catalyst and limits the continuous re-formation of a hydroxyl-decorated surface, which was a key chemical step in the previously suggested Ni-catalyzed hydration mechanism of carbon dioxide in aqueous solutions. At our experimental conditions, which expand the investigation of NiNP applicability toward a wider range of scenarios for CCU, NiNPs show a limited catalytic effect on the rate of CO2 hydration. Our study also highlights the importance of the solvation regime: while Ni surfaces may accelerate carbon dioxide hydration in water restricted environments, it may not be the case in fully hydrated conditions.

Construction of TiO2/TiOF2 heterojunction as a cathode material for high-performance Mg2+/Li+ hybrid-ion batteries

Anatase TiO₂ has attracted significant interest as a cathode material for Mg-ion batteries or Mg²⁺/Li⁺ hybrid-ion batteries. However, owing to the semiconductor property and slower Mg²⁺ diffusion kinetics it still suffers from poor electrochemical performance. Herein, a TiO₂/TiOF₂ heterojunction consisting of in situ formed TiO₂ sheets and TiOF₂ rods, was prepared by adjusting the amount of HF in the hydrothermal process, and used as cathode of Mg²⁺/Li⁺ hybrid-ion battery. The TiO₂/TiOF₂ heterojunction prepared by adding 2 mL HF (TiO₂/TiOF₂-2) exhibits high electrochemical performance, with a high initial discharge capacity (378 mAh/g at 50 mA/g), an outstanding rate performance (128.8 mAh/g at 2000 mA/g), and good cycle stability (capacity retention of 54 % after 500 cycles), which is much superior to that of Pure TiO₂ and Pure TiOF₂. The reactions of Li⁺ intercalation/detercalation in the TiO₂/TiOF₂ heterojunction are revealed by investigating the evolution of the hybrids during different electrochemical states. Moreover, theoretical calculations prove that the Li⁺ formation energy in the TiO₂/TiOF₂ heterostructure is much lower than that of TiO₂ and TiOF₂, demonstrating that the heterostructure plays a crucial role in the enhanced electrochemical performance. This work provides a novel method to design cathode materials with high performance by constructing heterostructure.

Nickel Oxide Nanoparticles Improve Soybean Yield and Enhance Nitrogen Assimilation

Nickel (Ni) is a trace element beneficial for plant growth and development and could improve crop yield by stimulating urea decomposition and nitrogen-fixing enzyme activity. A full life cycle study was conducted to compare the long-term effects of soil-applied NiO nanoparticles (n-NiO), NiO bulk (b-NiO), and NiSO₄ at 10-200 mg kg^-1 on plant growth and nutritional content of soybean. n-NiO at 50 mg kg^-1 significantly promoted the seed yield by 39%. Only 50 mg kg^-1 n-NiO promoted total fatty acid content and starch content by 28 and 19%, respectively. The increased yield and nutrition could be attributed to the regulatory effects of n-NiO, including photosynthesis, mineral homeostasis, phytohormone, and nitrogen metabolism. Furthermore, n-NiO maintained a Ni²⁺ supply for more extended periods than NiSO₄, reducing potential phytotoxicity concerns. Single-particle inductively coupled plasma mass spectrometry (sp-ICP-MS) for the first time confirmed that the majority of the Ni in seeds is in ionic form, with only 28-34% as n-NiO. These findings deepen our understanding of the potential of nanoscale and non-nanoscale Ni to accumulate and translocate in soybean, as well as the long-term fate of these materials in agricultural soils as a strategy for nanoenabled agriculture.

Assessment of hazardous impact of nickel oxide nanoparticles on biochemical and histological parameters of gills and liver tissues of Heteropneustes fossilis

BACKGROUND

The aim of the present study was to assess the hazardous impact of nickel oxide nanoparticles (NiO NPs) on gills and liver of Heteropneustes fossilis.

METHODS

Fishes were treated with four concentrations of NiO NPs for a period of 14 days. Nickel accumulation, lipid peroxidation, antioxidant enzymes activities (superoxide dismutase, catalase, glutathione s transferase & glutathione reductase), liver enzymes activities (aspartate amino transferase, alanine transaminase, & alkaline phosphatase), Na⁺/K⁺ ATPase activity, FTIR, metallothionein content, ethoxyresorufin-o-deethylase activity, immunohistochemistry, histology and scanning electron microscopy were analyzed in both gills and liver tissues.

RESULTS

Results revealed increased accumulation of nickel in both the tissues of exposed fishes. Lipid peroxidation and activities of different antioxidant enzymes increased (except superoxide dismutase) in both the tissues after exposure. Fluctuations in liver enzymes activities and variation in the activity of Na⁺/K⁺ ATPase were also observed. FTIR data revealed shift in peaks position in both the tissues. Level of metallothionein and its expression as well as activity of ethoxyresorufin-o-deethylase and expression of CYP1A also increased in both the target tissues of treated fishes. Furthermore, histological investigation and scanning electron microscopy showed structural damages in gills as well as liver tissues of exposed fishes.

CONCLUSION

Our results suggest that NiO NPs cause deteriorating effects on the gill and liver tissues of fish, therefore effluents containing these nanoparticles should be treated before their release into water bodies.

Biomimetic CO2 hydration activity of boronic acids

Inspired by the recent experimental reports on boron containing compounds to be active and biomimetic for carbon capture, we report the mechanistic details of CO2 hydration activities of boronic acids using density functional theory calculations. Four boronic acids were analyzed, viz., [3-methyl-6-(1H-pyrazol-1-yl)phenyl]boronic acid, 3-aminophenylboronic acid, 2,6-dibromophenylboronic acid and 2,6-bis(trifluoromethyl)phenylboronic acid. Free energy landscapes were developed for the hydration reaction. 2,6-Dibromophenylboronic acid showed the highest turnover frequency. Computational NMR and FTIR spectra for various intermediates of the reaction were analyzed and compared with experimental spectra. The energetics as well as the spectral analyses confirmed the biomimetic mechanism for CO2 hydration over all the boronic acid catalysts under investigation.

Mass Transfer Correlation and Optimization of Carbon Dioxide Capture in a Microchannel Contactor: A Case of CO2-Rich Gas

This work focused on the application of a microchannel contactor for CO2 capture using water as absorbent, especially for the application of CO2-rich gas. The influence of operating conditions (temperature, volumetric flow rate of gas and liquid, and CO2 concentration) on the absorption efficiency and the overall liquid-side volumetric mass transfer coefficient was presented in terms of the main effects and interactions based on the factorial design of experiments. It was found that 70.9% of CO2 capture was achieved under the operating conditions as follows; temperature of 50 °C, CO2 inlet fraction of 53.7%, total gas volumetric flow rate of 150 mL min−1, and adsorbent volumetric flow rate of 1 mL min−1. Outstanding performance of CO2 capture was demonstrated with the overall liquid-side volumetric mass transfer coefficient of 0.26 s−1. Further enhancing the system by using 2.2 M of monoethanolamine in water (1:1 molar ratio of MEA-to-CO2) boosted the absorption efficiency up to 88%.

Morphology control of nickel nanoparticles prepared in situ within silica aerogels produced by novel ambient pressure drying

Silica aerogels are low density solids with high surface area and high porosity which are ideal supports for catalyst materials. The main challenge in aerogel production is the drying process, which must remove liquid from the pores of the wet gel while maintaining the solid network. In this work, the synthesis of silica aerogels and nickel-doped silica aerogels by a low energy budget process is demonstrated. Silica aerogels are produced by ambient drying using ammonium bicarbonate, rather than a conventional low surface tension solvent. Heating dissociates the ammonium bicarbonate, so generating CO₂ and NH₃ within the pores of the wet gel which prevents pore collapse during drying. Nickel-doped aerogels were produced by reducing nickel ions within pre-synthesised silica aerogels. The morphology of the resulting nickel particles—spheres, wires and chains—could be controlled through an appropriate choice of synthesis conditions. Materials were characterized using nitrogen adsorption/desorption isotherms, scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis and X-ray diffraction. The surface area of undoped aerogel is found to increase with the concentration of ammonium bicarbonate salts from 360 to 530 m² g⁻¹, and that of nickel-doped silica aerogel varies from 240 to 310 m² g⁻¹ with nickel doping conditions.

High-throughput transcriptomics: An insight on the pathways affected in HepG2 cells exposed to nickel oxide nanoparticles

Nickel oxide nanoparticles (NiO-NPs) have been used in several consumer goods, reported to demonstrate the hepatotoxic effects in vitro and in vivo test models. Nonetheless the molecular mechanism of hepatotoxicity is still missing. Hence, a toxicogenomic approach integrating microscopic techniques and high-throughput RNA sequencing (RNA-Seq) was applied to reveal hepatotoxicity in human hepatocellular carcinoma cells (HepG2). NiO-NPs induced a concentration dependent (5-100 μg/ml) cytotoxicity, with a No observed effect level (NOEL) of 5 μg/ml. Hypoxia-inducible transcription factor-1α (HIF-1α) and miR-210 microRNA were upregulated at 25 and 100 μg/ml, while significant alteration on transcriptome at mRNA and pathway level was observed at non-toxic level of NiO-NPs treatment. The treated cells also showed activation of glycolysis, glutathione, lysosomes and autophagy pathways by a pathway-driven analysis. Flow cytometric analysis affirmed the elevation in nitric oxide (NO), Ca⁺⁺ influx, esterase, and disruption of mitochondrial membrane potential (ΔΨm). Cell cycle dysregulation was affirmed by the appearance of 30.5% subG1 apoptotic peak in NiO-NPs (100 μg/ml) treated cells. The molecular responses were consistent with the microscopic observation that NiO-NPs induced subcellular alterations in HepG2 cells. We conclude that hypoxia stress played a pivotal role in NiO-NPs induced hepatoxicity in HepG2 cells. Concentration dependent effects on transcriptomics specify a powerful tool to evaluate the molecular mechanisms of nanoparticle induced cytotoxicity. Overall our study unequivocally affirmed the transcriptomic alterations in human cells, consequently the prevalent usage of NiO-NPs should be given subtle consideration owing to its effects on biological processes.

Rapid CO2 capture-to-mineralisation in a scalable reactor

A CO₂ mineralisation process using brine solutions with a catalyst was investigated from experimental and modelling perspectives.

Exposure to nickel oxide nanoparticles insinuates physiological, ultrastructural and oxidative damage: A life cycle study on Eisenia fetida

Although, health and environmental hazards of Ni are ironclad; however, that of Nickle oxide nanoparticles (NiO-NPs) are still obscure. Therefore, impact of NiO-NPs exposure (0, 5, 50, 200, 500 and 1000 mg kg^-1 soil) on the earthworm (Eisenia fetida) survival (at 28th day), reproduction (at 56th day), histopathology, ultrastructures, antioxidant enzymes and oxidative DNA damage was appraised in full life cycle study. Lower concentrations of NiO-NPs (5, 50 and 200) did not influence the survival, reproduction and growth rate of adult worms significantly. However, reproduction reduced by 40-50% with 500 and 1000 mg kg^-1 exposure, which also induced oxidative stress leading to DNA damage in earthworms. Ultrastructural observation and histology of earthworms exposed to higher NiO-NPs concentrations revealed abnormalities in epithelium layer, microvilli and mitochondria with underlying pathologies of epidermis and muscles, as well as adverse effects on the gut barrier. To the best of our knowledge, this is the first study unveiling the adverse effects of NiO-NPs on a soil invertebrate (Eisenia fetida). Our findings clue towards looking extensively into the risks of NiO-NPs on soil organisms bearing agricultural and environmental significance.

Catalytic activity of nickel nanoparticles stabilized by adsorbing polymers for enhanced carbon sequestration

This work shows the potential of nickel (Ni) nanoparticles (NPs) stabilized by polymers for accelerating carbon dioxide (CO₂) dissolution into saline aquifers. The catalytic characteristics of Ni NPs were investigated by monitoring changes in diameter of CO₂ microbubbles. An increase in ionic strength considerably reduces an electrostatic repulsive force in pristine Ni NPs, thereby decreasing their catalytic potential. This study shows how cationic dextran (DEX), nonionic poly(vinyl pyrrolidone) (PVP), and anionic carboxy methylcellulose (CMC) polymers, the dispersive behaviors of Ni NPs can be used to overcome the negative impact of salinity on CO₂ dissolution. The cationic polymer, DEX was less adsorbed onto NPs surfaces, thereby limiting the Ni NPs’ catalytic activity. This behavior is due to a competition for Ni NPs’ surface sites between the cation and DEX under high salinity. On the other hand, the non/anionic polymers, PVP and CMC could be relatively easily adsorbed onto anchoring sites of Ni NPs by the monovalent cation, Na⁺. Considerable dispersion of Ni NPs by an optimal concentration of the anionic polymers improved their catalytic capabilities even under unfavorable conditions for CO₂ dissolution. This study has implications for enhancing geologic sequestration into deep saline aquifers for the purposes of mitigating atmospheric CO₂ levels.

The Carbonation of Wollastonite: A Model Reaction to Test Natural and Biomimetic Catalysts for Enhanced CO2 Sequestration

One of the most promising strategies for the safe and permanent disposal of anthropogenic CO2 is its conversion into carbonate minerals via the carbonation of calcium and magnesium silicates. However, the mechanism of such a reaction is not well constrained, and its slow kinetics is a handicap for the implementation of silicate mineral carbonation as an effective method for CO2 capture and storage (CCS). Here, we studied the different steps of wollastonite (CaSiO3) carbonation (silicate dissolution → carbonate precipitation) as a model CCS system for the screening of natural and biomimetic catalysts for this reaction. Tested catalysts included carbonic anhydrase (CA), a natural enzyme that catalyzes the reversible hydration of CO2(aq), and biomimetic metal-organic frameworks (MOFs). Our results show that dissolution is the rate-limiting step for wollastonite carbonation. The overall reaction progresses anisotropically along different [hkl] directions via a pseudomorphic interface-coupled dissolution–precipitation mechanism, leading to partial passivation via secondary surface precipitation of amorphous silica and calcite, which in both cases is anisotropic (i.e., (hkl)-specific). CA accelerates the final carbonate precipitation step but hinders the overall carbonation of wollastonite. Remarkably, one of the tested Zr-based MOFs accelerates the dissolution of the silicate. The use of MOFs for enhanced silicate dissolution alone or in combination with other natural or biomimetic catalysts for accelerated carbonation could represent a potentially effective strategy for enhanced mineral CCS.

Engineered Nickel Oxide Nanoparticle Causes Substantial Physicochemical Perturbation in Plants

Concentration of engineered nickel oxide nanoparticle (NiO-NP) in nature is on the rise, owing to large scale industrial uses, which have accreted the scope of its exposure to plants, the primary producers of the ecosystem. Though an essential micronutrient for the animal system, supported by numerous studies confirming its toxicity at higher dosages, nickel oxide is graded as a human carcinogen by WHO. A few studies do depict toxicity and bioaccumulation of nickel in plants; however, interaction of NiO-NP with plants is not well-elucidated. It is known that exposure to NiO-NP can incite stress response, leading to cytotoxicity and growth retardation in some plants, but a defined work on the intricate physicochemical cellular responses and genotoxic challenges is wanting. The present study was planned to explore cytotoxicity of NiO-NP in the model plant, Allium cepa L., its internalization in the tissue and concomitant furore created in the antioxidant enzyme system of the plant. The prospect of the NiO-NP causing genotoxicity was also investigated. Detailed assessments biochemical profiles and genotoxicity potential of NiO-NP on A. cepa L. was performed and extended to four of its closest economically important relatives, Allium sativum L., Allium schoenoprasum L., Allium porrum L., and Allium fistulosum L. Growing root tips were treated with seven different concentrations of NiO-NP suspension (10-500 mg L-1), with deionised distilled water as negative control and 0.4 mM EMS solution as positive control. Study of genotoxic endpoints, like, mitotic indices (MI), chromosomal aberrations (CAs), and chromosome breaks confirmed NiO-NP induced genotoxicity in plants, even at a very low dose (10 mg L-1). That NiO-NP also perturbs biochemical homeostasis, disrupting normal physiology of the cell, was confirmed through changes in state of lipid peroxidation malonaldehyde (MDA), as well as, in oxidation marker enzymes, like catalase (CAT), super oxide dismutase (SOD), and guiacol peroxidase (POD) activities. It was evident that increase in NiO-NP concentration led to decrease in MIs in all the study materials, concomitant with a spike of stress-alleviating, antioxidant enzymes-CAT, POD, SOD, and significant increase in MDA formation. Hence, it can be confirmed that NiO-NP should be treated as an environmental hazard.

Trends, application and future prospectives of microbial carbonic anhydrase mediated carbonation process for CCUS

Growing industrialization and the desire for a better economy in countries has accelerated the emission of greenhouse gases (GHGs), by more than the buffering capacity of the earth's atmosphere. Among the various GHGs, carbon dioxide occupies the first position in the anthroposphere and has detrimental effects on the ecosystem. For decarbonization, several non-biological methods of carbon capture, utilization and storage (CCUS) have been in use for the past few decades, but they are suffering from narrow applicability. Recently, CO₂ emission and its disposal related problems have encouraged the implementation of bioprocessing to achieve a zero waste economy for a sustainable environment. Microbial carbonic anhydrase (CA) catalyses reversible CO₂ hydration and forms metal carbonates that mimic the natural phenomenon of weathering/carbonation and is gaining merit for CCUS. Thus, the diversity and specificity of CAs from different micro-organisms could be explored for CCUS. In the literature, more than 50 different microbial CAs have been explored for mineral carbonation. Further, microbial CAs can be engineered for the mineral carbonation process to develop new technology. CA driven carbonation is encouraging due to its large storage capacity and favourable chemistry, allowing site-specific sequestration and reusable product formation for other industries. Moreover, carbonation based CCUS holds five-fold more sequestration capacity over the next 100 years. Thus, it is an eco-friendly, feasible, viable option and believed to be the impending technology for CCUS. Here, we attempt to examine the distribution of various types of microbial CAs with their potential applications and future direction for carbon capture. Although there are few key challenges in bio-based technology, they need to be addressed in order to commercialize the technology.

p53, MAPKAPK-2 and caspases regulate nickel oxide nanoparticles induce cell death and cytogenetic anomalies in rats

The unique properties of nickel oxide nanoparticles (NiO-NPs) distinguish it from traditional nickel containing materials, and enable its industrial application as an advanced nanomaterial. Despite the benefits, the in vivo toxicological studies on NiO-NPs have been mainly focused on its pulmonary pathology. However, NiO-NPs exposure via oral route and its subsequent toxic effects in exposed animals are still lacking. Hence, we evaluated the NiO-NPs oral toxicity in male Wistar rats. NiO-NPs induced significant increase in chromosomal aberrations (CAs), micronuclei (MN) formation and, DNA damage in rats. Flow cytometric analysis showed apoptosis, ROS generation and dysfunction of mitochondrial membrane potential (ΔΨm). Imbalance of antioxidant enzymes, along with histological alterations was found in liver. Taking together, these results unequivocally suggested that NiO-NPs induced toxicity was through cyto-genetic alterations, oxidative stress, apoptosis and liver toxicity. The western blotting data validated the interplay of p53 and MAPKAPK-2 signalling via activation of caspases 8, 3, cyto c, pro-apoptotic bax and anti-apoptotic bcl-2 proteins.

Catalytic CO2 reduction to valuable chemicals using NiFe-based nanoclusters: a first-principles theoretical evaluation

The catalytic performance and possible mechanisms of CO₂ hydrogenation on noble-metal-free NiFe bimetal nanoparticles are theoretically evaluated.

Mechanistic insights into biomimetic carbonic anhydrase action catalyzed by doped carbon nanotubes and graphene

Density functional theory shows transition metal doped carbon nanotubes and graphene to be active and biomimetic for carbon capture.

Metallic nickel nanoparticles and their effect on the embryonic development of the sea urchin Paracentrotus lividus

The presence of nanoparticles in many industrial applications and daily products is making it nowadays crucial to assess their impact when exposed to the environment. Metallic nickel nanoparticles (Ni NPs) are of high industrial interest due to their ability to catalyze the reversible hydration of CO2 to carbonic acid at ambient conditions. We characterized metallic Ni NPs by XRD, HRTEM and EDS and determined the solubility of free nickel ions from 3 mg/L metallic Ni NPs in seawater by ICP-MS over 96 h, which was below 3%. Further, embryonic development of the sea urchin Paracentrotus lividus was investigated for 48 h in the presence of metallic Ni NPs (0.03 mg/L to 3 mg/L), but no lethal effects were observed. However, 3 mg/L metallic Ni NPs caused a size reduction similar to 1.2 mg/L NiCl2*6 H2O. The obtained results contribute to current studies on metallic Ni NPs and point to their consequences for the marine ecosystem.

Enhanced removal of nickel(II) ions from aqueous solutions by SDS-functionalized graphene oxide

In this paper, a one-pot and easy-to-handle method at room temperature without additional chemicals for the modification of graphene oxide (GO) with surfactant is found. Removal of nickel (II) ions from aqueous solutions by GO and surfactant (sodium dodecyl sulphate) modified graphene oxide (SDS-GO) was studied spectrophotometrically at room temperature as a function of time, initial concentration and pH. Adsorption capacity of the adsorbent was increased dramatically (from 20.19 to 55.16 mg/g found by Langmuir model) due to the functionalization of the surface by SDS. The driving force of the adsorption of Ni(II) ions is electrostatic attraction and Ni(II) ions adsorbed on the GO surface chemically besides ion exchange.

Yolk/shell nanoparticles: classifications, synthesis, properties, and applications

Core/shell nanoparticles were first reported in the early 1990s with a simple spherical core and shell structure, but the area is gradually diversifying in multiple directions such as different shapes, multishells, yolk/shell etc., because of the development of different new properties of the materials, which are useful for several advanced applications. Among different sub-areas of core/shell nanoparticles, yolk/shell nanoparticles (YS NPs) have drawn significant attention in recent years because of their unique properties such as low density, large surface area, ease of interior core functionalization, a good molecular loading capacity in the void space, tunable interstitial void space, and a hollow outer shell. The YS NPs have better properties over simple core/shell or hollow NPs in various fields including biomedical, catalysis, sensors, lithium batteries, adsorbents, DSSCs, microwave absorbers etc., mainly because of the presence of free void space, porous hollow shell, and free core surface. This review presents an extensive classification of YS NPs based on their structures and types of materials, along with synthesis strategies, properties, and applications with which one would be able to draw a complete picture of this area.

Microfluidic studies of carbon dioxide

Carbon dioxide (CO2) sequestration, storage and recycling will greatly benefit from comprehensive studies of physical and chemical gas-liquid processes involving CO2. Over the past five years, microfluidics emerged as a valuable tool in CO2-related research, due to superior mass and heat transfer, reduced axial dispersion, well-defined gas-liquid interfacial areas and the ability to vary reagent concentrations in a high-throughput manner. This Minireview highlights recent progress in microfluidic studies of CO2-related processes, including dissolution of CO2 in physical solvents, CO2 reactions, the utilization of CO2 in materials science, and the use of supercritical CO2 as a "green" solvent.

Impacts of nickel nanoparticles on mineral carbonation

This work presents experimental results regarding the use of pure nickel nanoparticles (NiNP) as a mineral carbonation additive. The aim was to confirm if the catalytic effect of NiNP, which has been reported to increase the dissolution of CO₂ and the dissociation of carbonic acid in water, is capable of accelerating mineral carbonation processes. The impacts of NiNP on the CO₂ mineralization by four alkaline materials (pure CaO and MgO, and AOD and CC steelmaking slags), on the product mineralogy, on the particle size distribution, and on the morphology of resulting materials were investigated. NiNP-containing solution was found to reach more acidic pH values upon CO₂ bubbling, confirming a higher quantity of bicarbonate ions. This effect resulted in acceleration of mineral carbonation in the first fifteen minutes of reaction time when NiNP was present. After this initial stage, however, no benefit of NiNP addition was seen, resulting in very similar carbonation extents after one hour of reaction time. It was also found that increasing solids content decreased the benefit of NiNP, even in the early stages. These results suggest that NiNP has little contribution to mineral carbonation processes when the dissolution of alkaline earth metals is rate limiting.