g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Structural Features of Carbon Dots and Their Agricultural Potential

Carbon dots (CDs) have drawn attention due to their enticing physical, chemical, and surface properties. Besides, good conductivity, low toxicity, environmental friendliness, simple synthetic routes, and comparable optical properties are advantageous features of CDs. Further, recently, CDs have been explored for biological systems, including plants. Among biological systems, only plants form the basis for sustainability and life on Earth. In this Review, we reviewed suitable properties and applications of CDs, such as promoting the growth of agricultural plants, disease resistance, stress tolerance, and target transportation. Summing up the available studies, we believe that the applications of CDs are yet to be explored significantly for innovation and technology-based agriculture.

A novel MIL-125(Ti)-based nanocomposite for enhanced adsorption and catalytic degradation of tetracycline hydrochloride: Synergetic mechanism of calcination and the nitrogen-containing reticulated surface layer

A multi-nitrogen conjugated organic molecule (TPE-2Py) was selected to surface modify the calcined MIL-125(Ti) to prepare a nanocomposite (TPE-2Py@DSMIL-125(Ti)) for adsorption and photodegradation of organic pollutant (tetracycline hydrochloride) under visible light. A novel reticulated surface layer was formed on the nanocomposite, and the adsorption capacity of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can reach 157.7 mg/g under neutral conditions, which is higher than that of most other reported materials. Kinetic and thermodynamic studies show that the adsorption is a spontaneous heat absorption process, dominated by chemisorption, in which electrostatic interaction, π-π conjugation and Ti-N covalent bonds played dominant roles. The photocatalytic study shows that the visible photo-degradation efficiency of TPE-2Py@DSMIL-125(Ti) for tetracycline hydrochloride can further reach 89.1% after adsorption. Mechanism studies reveal that •O₂^- and h⁺ play a major role in the degradation process, and the separation and transfer rate of photo-generated carriers increase, improving its visible photocatalytic performance. This study revealed the relationship between the adsorption/photocatalytic properties of the nanocomposite and the structure of the molecular as well as the calcination, providing a convenient strategy to regulate the removal efficiency of MOFs materials towards organic pollutants. Furthermore, TPE-2Py@DSMIL-125(Ti) exhibits good reusability and even better removal efficiency for tetracycline hydrochloride in real water samples, indicating its sustainable treatment of pollutants in contaminated water.

Antibacterial Carbon Dots-Based Composites

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Bandgap-engineered ferroelectric single-crystalline NBT-BT based nanocomposites with excellent visible light-ultrasound catalytic performance

Bandgap engineered ferroelectrics exhibit encouraging multi-energy catalytic performance by coupling the piezoelectricity and photoexcitation, which shows immense potential for environmental remediation and fuel production. However, it is challenging to prepare nano single-crystalline ferroelectric piezo-photoelectric with strong visible light absorption ability. Here, Ni mediated NBT-BT(NBT-BNT) single-crystalline nanocubes around 100 nm with considerable visible light absorption were synthesized by a high-temperature hydrothermal method. The mechanism of Ni2+ on the formation of NBT-BT nanocubes was proposed. The catalytic efficiency of NBT-BNT nanocubes is enhanced by decorating carbon quantum dots (CQDs). The RhB can be degraded within 8 min and the hydrogen production rate reaches up to ∼350 μmol g-1h-1 under visible light-ultrasonic condition. Moreover, under the simulated sunlight-ultrasound condition, RhB can be degraded within merely 3 min and a high H2 production rate of ∼747 μmol g-1h-1 is achieved. This work presents a paradigm for preparing ferroelectric single-crystalline nanocatalysts for multi-energy catalytic application.

Application of Quantum Dot Interface Modification Layer in Perovskite Solar Cells: Progress and Perspectives

Perovskite solar cells (PSCs) are currently attracting a great deal of attention for their excellent photovoltaic properties, with a maximum photoelectric conversion efficiency (PCE) of 25.5%, comparable to that of silicon-based solar cells. However, PSCs suffer from energy level mismatch, a large number of defects in perovskite films, and easy decomposition under ultraviolet (UV) light, which greatly limit the industrial application of PSCs. Currently, quantum dot (QD) materials are widely used in PSCs due to their properties, such as quantum size effect and multi-exciton effect. In this review, we detail the application of QDs as an interfacial layer to PSCs to optimize the energy level alignment between two adjacent layers, facilitate charge and hole transport, and also effectively assist in the crystallization of perovskite films and passivate defects on the film surface.

S-scheme BiVO4/CQDs/β-FeOOH photocatalyst for efficient degradation of ofloxacin: Reactive oxygen species transformation mechanism insight

Photocatalysis technology exhibited promising application for advanced treatment of wastewater. Nevertheless, the design of efficient photocatalyst and the mechanism of free radicals in pollutant degradation still remained to be further investigated. Herein, BiVO₄/CQDs/β-FeOOH photocatalyst was fabricated by electrostatic self-assembly method, which exhibited the excellent photocatalytic performance. Under visible-light irradiation, the removal rate of ofloxacin by BiVO₄/CQDs/β-FeOOH (0.25 min^-1) was 1.93 times than pristine BiVO₄, and the removal efficiency in 15 min reached 99.21%. The perfect reusability of BiVO₄/CQDs/β-FeOOH was ascribed to the persistent catalytic active centers provided by the renewable surface oxygen vacancies on the β-FeOOH. As electron transfer channels, CQDs facilitated the transfer of BiVO₄ photogeneration electrons. The matched band structure allowed the construction of S-scheme heterojunctions, and the higher conduction band position was retained while the carrier separation was promoted. More importantly, this work firstly reported the phenomenon that the main reactive groups in the photocatalysis process would be directionally transformed with the change of pH conditions. Based on the analysis of capture and electron paramagnetic resonance experiments, ·O₂^- was the main free radicals to photodegrade OFL in neutral and alkaline conditions. However, when the solution pH turned into acidic, the photodegradation of OFL was dominated by ¹O₂. This innovative phenomenon was due to that acidic condition accelerated the reaction kinetics of spontaneous transformation of ·O₂^- to ¹O₂ and inhibited the direct oxidation of pollutants by ·O₂^-. Accordingly, this research could inspire theoretical study of free radical reaction and the design of S-scheme heterojunction photocatalysts.

Recent Progress on Carbon Quantum Dots Based Photocatalysis

As a novel carbon allotrope, carbon quantum dots (CQDs) have been investigated in various fields, including photocatalysis, bioimaging, optoelectronics, energy and photovoltaic devices, biosensing, and drug delivery owing to their unique optical and electronic properties. In particular, CQDs' excellent sunlight harvesting ability, tunable photoluminescence (PL), up-conversion photoluminescence (UCPL), and efficient photo-excited electron transfer have enabled their applications in photocatalysis. This work focuses on the recent progress on CQDs-related materials' synthesis, properties, and applications in photocatalysis.

Bridging between NiAl-LDH and g-C3N4 by using carbon quantum dots for highly enhanced photoreduction of CO2 into CO

A series of treble NiAl-LDH/g-C₃N₄/carbon quantum dots (LDH/CN/CQDs) photocatalysts is successfully prepared for the photoreduction of CO₂ to CO via a facile hydrothermal pathway. In the 3D flower-like LDH/CN/CQDs, CQDs not only achieve the efficient inhibition of charge recombination but also act as the unhindered "electronic bridges" to synergistically construct a classical type-Ⅱ charge transfer configuration, which synchronously permits the effluence of photogenerated electrons from CN to LDH and holes from LDH to CN, and promotes ultraviolet-visible irradiation respondence. The sample of LDH/CN/CQDs-6 is the optimal one amongst the LDH/CN/CQDs with a larger special surface area (98.43 m²g^-1) and an appropriate content of CQDs (66.9 wt%), exhibiting the highest CO evolution rate (5.2 μmol·g^-1·h^-1) under visible light irradiation without any sacrificial agent or photosensitizer in water. This is 26.8- and 20.9-fold higher than those of the pristine LDH, pure CN, and their binary counterparts, respectively, and also outperforms most reported LDH-based photocatalysts. As unhindered electron conduction bridges, the highly dispersed CQDs in the LDH/CN heterojunction significantly increase utilization efficiency of light energy and separation efficiency of photogenerated electron-hole pairs. This work provides a beneficial attempt to integrate CQDs with LDH/CN for the positive synergetic effect on both photoelectric properties and electron transfer to obtain highly enhanced photocatalytic activity of CO₂ into CO, and expected to be extended towards broader photocatalytic applications.

Solar light-driven photocatalytic degradation and mineralization of beta blockers propranolol and atenolol by carbon dot/TiO2 composite

Herein improved solar light-driven photocatalytic degradation and mineralization of two emerging pollutants as well as recalcitrant beta blockers propranolol (PR) and atenolol (AT) have been demonstrated by metal-free carbon dot/TiO₂ (CDT) composite. Hydrothermally synthesized TiO₂ has been decorated with electrochemically synthesized carbon dots (CDs) and was well characterized by various analytical techniques viz. XRD, FTIR, Raman, XPS, UV-visible DRS, FESEM, and TEM. The optimized CDT composite, 2CDT (2 mL carbon dot/TiO₂), showed ~ 3.45- and ~ 1.75-fold enhancement in the photodegradation rate as compared to pristine TiO₂ for PR and AT respectively in 1 hour of irradiation along with complete degradation of PR and AT after 3 hours of irradiation. 2CDT exhibited 76% and 80% mineralization of PR and AT in contrast with 62% and 47% observed by pristine TiO₂. Further, the major reaction intermediates formed after degradation have been identified by HPLC/MS analysis, confirming more than 99% reduction of the parent compound for both PR and AT. Reusability of the optimized catalyst also showed successful degradation up to 3 cycles, showing reduction abilities of 97%, 95%, and 94% for 1st, 2nd, and 3rd cycle respectively. The enhanced degradation and mineralization efficiency of the 2CDT composite could be attributed to the excellent photosensitizer and electron reservoir properties of the CD along with upconverted photoluminescence behavior. The present study unlocks the possibility of using metal-free, facile CDT composite for effective degradation and mineralization of widely used beta blockers and other pharmaceuticals.

Step-Scheme Heterojunction between CdS Nanowires and Facet-Selective Assembly of MnOx-BiVO4 for an Efficient Visible-Light-Driven Overall Water Splitting

The spatial separation and transport of photogenerated charge carriers is crucial in building an efficient photocatalyst for solar energy conversion into chemical energy. A step-scheme CdS/MnO_x-BiVO₄ photocatalyst was synthesized by spatial deposition of MnO_x and one-dimensional (1D) CdS nanowires on a three-dimensional (3D) decahedron BiVO₄ surface. The photocatalytic activity of CdS/MnO_x-BiVO₄ for the overall water-splitting reaction was investigated without sacrificial reagent under visible light irradiation. The synthesized photocatalysts were thoroughly analyzed using high-end characterization techniques. The 5CdS/MnO_x-BiVO₄ exhibited the highest H₂ and O₂ production rates of 1.01 and 0.51 mmol g^-1 h^-1, respectively, with an apparent quantum yield of 11.3% in the absence of any sacrificial reagent. The excellent photoactivity is due to the presence of oxygen vacancies along with effective charge separation/transfer properties and strong interaction of cocatalysts (MnO_x and Pt) with the photocatalysts (BiVO₄ and CdS) in the 5CdS/MnO_x-BiVO₄ heterojunction. The significance of the presence of MnO_x and Pt cocatalysts on the selective facets of BiVO₄ for efficient overall water splitting reaction is highlighted in this work.

Boron-doped carbon quantum dots: a 'turn-off' fluorescent probe for dopamine detection

Boron-doped carbon quantum dots (size 2.3 nm) were fabricated by a modified hydrothermal carbonization one-pot synthesis protocol using 4-hydroxy phenylboronic acid as the common precursor that provided seed for the formation of carbon quantum dots as well as the dopant. These quantum dots exhibited excellent properties, namely good aqueous dispersion, strong fluorescence emission, good environmental stability, high selectivity and sensitivity towards the neurochemical dopamine even in the absence of any linker, functionalizing agents or enzyme. It is shown that this material can be used as a 'turn-off' fluorescent probe for the detection of even low concentrations of dopamine with a limit of detection (3σ/S) of about 6 μM. The simplicity of the synthesis protocol and the ease of dopamine detection define the novelty of this approach.

Patterned carbon dot-based thin films for solid-state devices

Carbon dot-based fluorescent nanocomposite compounds were obtained following microwave assisted thermal treatment of an aqueous mixture consisting of citric acid and urea. Thin film deposition of nanocomposites on SiO2 (100) substrates is followed by annealing, in order to render the films dissolution-resistant and processable. Optical lithography and O2 plasma etching are utilized to pattern the deposited films in the desired shapes and dimensions and a solid-state relative humidity sensor is fabricated on the SiO2 substrate. Spectroscopy and microscopy techniques are employed to characterize and monitor the whole process throughout the fabrication steps. The patterned films retain the functional groups introduced during their synthesis and continue to display hydrophilicity and PL properties. Successful patterning of these nanocomposites opens the way for the fabrication of solid-state, carbon dot-based optical and electrical devices that take advantage of the properties of carbon quantum dots.

In situ assembly of CQDs/Bi2WO6 for highly efficient photocatalytic degradation of VOCs under visible light

A facile strategy of the assembly of CQD/Bi₂WO₆ hybrid materials, which exhibit highly efficient photocatalytic degradation of pollutants under visible light.

One-Pot Synthesized Visible Light-Driven BiOCl/AgCl/BiVO4 n-p Heterojunction for Photocatalytic Degradation of Pharmaceutical Pollutants

A novel enhanced visible light absorption BiOCl/AgCl/BiVO₄ heterojunction of photocatalysts could be obtained through a one-pot hydrothermal method used with two different pH solutions. There was a relationship between synthesis pH and the ratio of BiOCl to BiVO₄ in XRD planes and their photocatalytic activity. The visible light photocatalytic performances of photocatalysts were evaluated via degradation of diclofenac (DCFF) as a pharmaceutical model pollutant. Furthermore, kinetic studies showed that DCF degradation followed pseudo-first-order kinetics. The photocatalytic degradation rates of BiOCl/AgCl/BiVO₄ synthesized at pH = 1.2 and pH = 4 for DCF were 72% and 47%, respectively, showing the higher activity of the photocatalyst which was synthesized at a lower pH value. It was concluded that the excellent photocatalytic activity of BiOCl/AgCl/BiVO₄ is due to the enhanced visible light absorption formation of a heterostructure, which increased the lifetime of photo-produced electron–hole pairs by creating a heterojunction. The influence of pH during synthesis on photocatalytic activity in order to create different phases was investigated. This work suggests that the BiOCl/AgCl/BiVO₄ p-n heterojunction is more active when the ratio of BiOCl to BiVO₄ is smaller, and this could be achieved simply by the pH adjustment. This is a promising method of modifying the photocatalyst for the purpose of pollutant degradation under visible light illumination.

Facile synthesis of hierarchically nanostructured bismuth vanadate: An efficient photocatalyst for degradation and detection of hexavalent chromium

Heterostructured nanomaterials can paid more significant attention in environmental safety for the detection and degradation/removal of hazardous toxic chemicals over a decay. Here, we report the preparation of hierarchically nanostructured shuriken like bismuth vanadate (BiVO₄) as a bifunctional catalyst for photocatalytic degradation and electrochemical detection of highly toxic hexavalent chromium (Cr(VI)) using the green deep eutectic solvent reline, which allows morphology control in one of the less energy-intensive routes. The SEM results showed a good dispersion of BiVO₄ catalyst and the HR-TEM revealed an average particle size of ca. 5-10 nm. As a result, the BiVO₄ exhibited good photocatalytic activity under UV-light about 95% reduction of Cr(VI) to Cr(III) was observed in 160 min. The recyclability of BiVO₄ catalyst exhibited an appreciable reusability and stability of the catalyst towards the photocatalytic reduction of Cr(VI). Also, the BiVO₄-modified screen printed carbon electrode (BiVO₄/SPCE) displayed an excellent electrochemical performance towards the electrochemical detection of Cr(VI). Besides, the BiVO₄/SPCE demonstrated tremendous electrocatalytic activity, lower linear range (0.01-264.5 μM), detection limit (0.0035 μM) and good storage stability towards the detection of Cr(VI). Importantly, the BiVO₄ modified electrode was also found to be a good recovery in water samples for practical applications.

Novel metal doped carbon quantum dots/CdS composites for efficient photocatalytic hydrogen evolution

Carbon quantum dots (CDs) are rising stars for photocatalytic applications due to their low toxicity and excellent electron transfer characteristics. Doping with heteroatoms is expected to adjust the band levels and electron transfer properties of CDs, and understanding the effect of doping on CDs can aid the rational preparation of highly efficient CD-based photocatalysts. Herein, we prepared a series of metal atom (Zn, Co, Bi, Cd, or Ti) doped CDs by pyrolysis and explored the photocatalytic application of these metal doped CDs for the first time. The metal doped CDs were combined with CdS nanowires as a co-catalyst for photocatalytic hydrogen production. The Bi, Cd and Ti doped CDs/CdS composites show much better hydrogen production performance than the undoped CDs/CdS composite. Among these composites, Bi-CDs/CdS presents the optimal interfacial charge separation and the best hydrogen production performance. The hydrogen evolution rate of Bi-CDs/CdS is 4.2 times and almost one time higher than that of pure CdS and undoped CDs/CdS, respectively. Bi doping can make the CDs metallic and promote the charge transfer of CDs. Such a great enhancement originates from the outstanding electron transfer properties of Bi-doped CDs, as well as the effective charge separation between Bi-doped CDs and CdS. Bi doping was demonstrated to be an effective strategy for optimizing the photocatalytic activity of CD based composites.

In situ synthesis of C-doped BiVO4 with natural leaf as a template under different calcination temperatures

In this work, a series of C-doped BiVO₄ (BiVO₄-T) with natural leaf structures were synthesized by a dipping-calcination method with the leaf of Chongyang wood seedling as a template under different calcination temperatures. The structures and morphologies of BiVO₄-T were observed by FE-SEM observations. The doped carbon in BiVO₄-T was formed in situ from the natural leaf during the calcination process and the amount of doping could be regulated from 0.51–1.16 wt% by controlling the calcination temperature. It was found that the sample calcined at 600 °C (BiVO₄-600) with a C-doping content of 1.16 wt% showed the best photocatalytic degradation activity. After 120 min visible light irradiation, the photocatalytic decomposition efficiency of RhB for BiVO₄-600 is 2.2 times higher than that of no template BiVO₄. The enhanced photocatalytic performance is ascribed to the combined action of the unique morphology and doped-carbon. It is considered that the unique structures and carbon doping of BiVO₄-600 are in favor of the enhancement of visible light absorption, which was supported by UV-vis DRS. Furthermore, the C-doping can enhance the efficient separation and transfer of the photo-generated electron–hole pairs, as proved by PL measurements. This study provides a simple dipping-calcination method and found the best calcination temperature to fabricate a high-performance BiVO₄, which simultaneously achieves morphology and C-doping control in one step.

A series of C-doped BiVO₄ with natural leaf as a template were synthesized under different calcination temperatures by the dipping-calcination method, which simultaneously achieves morphology and C-doping control in one step.

Visible-light-driven CQDs@MIL-125(Ti) nanocomposite photocatalyst with enhanced photocatalytic activity for the degradation of tetracycline

In the present study, a novel photocatalyst, CQDs@MIL-125(Ti) (CQDs = carbon quantum dots), was prepared via a solvothermal procedure. The photocatalytic properties were tested by the degradation of tetracycline (TC) with a 250 W Xe lamp (λ > 420 nm). Compared with pure MIL-125(Ti), the 10 wt% CQDs@MIL-125(Ti) photocatalyst can significantly improve the degradation process of TC, and the degradation efficiency can reach 90% within 4 h. The enhancement in the photocatalytic performance is due to the CQDs, which can promote the absorption of visible light and also efficiently accelerate the separation of photogenerated electron–hole pairs. We have also demonstrated that superoxide radicals (·O₂⁻) and holes (h⁺) play crucial roles in the photocatalytic degradation of TC through capture experiments. The current work provides a new idea for constructing high-efficiency photocatalysts based on MIL-125(Ti).

A novel CQDs@MIL-125(Ti) photocatalyst had been synthesized by a facile solvothermal process for the degradation of TC. The possible degradation mechanism was proposed based on the active species trapping experiments.

Ordered-Disordered BaZrO3-δ Hollow Nanosphere/Carbon Dot Hybrid Nanocomposite: A New Visible-Light-Driven Efficient Composite Photocatalyst for Hydrogen Production and Dye Degradation

Perovskites form an interesting class of photocatalytic compounds because of their chemical stability and exotic chemistry. Although barium zirconates have been known for a long time, their photocatalytic study in the literature is very limited. Herein, we have studied the effect of structural disorder, oxygen vacancies and carbon dots (CDs) on photocatalytic activity of BaZrO_3-δ (BZO) hollow nanospheres. High alkaline conditions during hydrothermal synthesis lead to the formation of disordered states as well as oxygen vacancies in BZO and create midgap states within the band gap of BZO. The midgap states further shift its absorption onset toward visible light and their presence and effects have been proved by ultraviolet-visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and electron spin resonance analysis. A composite that consists of CDs shows upconversion photoluminescence and charge-carrier transfer properties to enhance the light absorption of a photocatalyst and its activity. The photocatalytic efficiency of the compounds were examined by H₂ evolution and the degradation of methylene blue (MB) dye. In this study, loading of 3 wt% CDs on BZO shows the highest hydrogen evolution efficiency (670 μmol/h/g) with an apparent quantum yield of ∼4% and the highest MB dye degradation efficiency (∼90%) among all synthesized composites. The synergistic effect of increased visible light absorption along with enhanced photogenerated charge-carrier transfer efficiency in the presence of CDs and oxygen vacancies in BZO contributes to the enhanced photocatalytic efficacy of hybrid nanomaterials under visible light irradiation.

The enhancement of photocatalytic performance of SrTiO3 nanoparticles via combining with carbon quantum dots

Carbon quantum dots were prepared by a simple chemical process using activated carbon as carbon source. The as-prepared carbon quantum dots are fine with a narrow size distribution and show excellent hydrophilicity. The carbon quantum dots were combined with SrTiO3 nanoparticles through a simple impregnation process to obtain a carbon quantum dots/SrTiO3 nanocomposite. The photocatalytic reaction rate of carbon quantum dots/SrTiO3 nanocomposite is about 5.5 times as large as that of pure SrTiO3 in the degradation of rhodamine B under sunlight irradiation. The enhanced performance in the degradation of rhodamine B may be attributed to the interfacial transfer of photogenerated electrons from SrTiO3 to carbon quantum dots, leading to effective charge separation in SrTiO3. Carbon quantum dots show potential applications in high-efficiency photocatalyst design.

Enhanced Photocatalytic Activity toward Organic Pollutants Degradation and Mechanism Insight of Novel CQDs/Bi₂O₂CO₃ Composite

Novel carbon quantum dots (CQDs) modified with Bi₂O₂CO₃ (CQDs/Bi₂O₂CO₃) were prepared using a simple dynamic-adsorption precipitation method. X-ray diffractometry (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM) were used to test the material composition, structure, and band structures of the as-prepared samples. Methylene blue (MB) and colorless phenol, as target organic pollutants, were used to evaluate the photocatalytic performance of the CQDs/Bi₂O₂CO₃ hybrid materials under visible light irradiation. Experimental investigation shows that 2–5 nm CQDs were uniformly decorated on the surface of Bi₂O₂CO₃; CQDs/Bi₂O₂CO₃ possess an efficient photocatalytic performance, and the organic matter removal rate of methylene blue and phenol can reach up to 94.45% and 61.46% respectively, within 2 h. In addition, the degradation analysis of phenol by high performance liquid chromatography (HPLC) proved that there are no other impurities in the degradation process. Photoelectrochemical testing proved that the introduction of CQDs (electron acceptor) effectively suppresses the recombination of e⁻-h⁺, and promotes charge transfer. Quenching experiments and electron spin resonance (ESR) suggested that ·OH, h⁺, and ·O₂⁻ were involved in the photocatalytic degradation process. These results suggested that the up-conversion function of CQDs could improve the electron transfer and light absorption ability of photocatalysts and ·O₂⁻ formation. Furthermore, the up-conversion function of CQDs would help maintain photocatalytic stability. Finally, the photocatalytic degradation mechanism was proposed according to the above experimental result.

Cobalt phosphide/carbon dots composite as an efficient electrocatalyst for oxygen evolution reaction

The oxygen evolution reaction (OER) is a promising energy conversion system, which has been studied a lot in recent years. However, owing to the high overpotential and sluggish kinetics of the OER, an efficient electrocatalyst is necessary to lower the overpotential and accelerate the reaction. In this paper, we report a cobalt phosphide (CoP)/carbon dots (CDs) composite as an electrocatalyst for the OER for the first time. A facile two-step method was used to synthesize the CoP/CDs composite and the concentration of CDs in the composite was further regulated. The experimental results show that when the amount of CDs in the composite is 6 mg (28.79 wt%C), the obtained CoP/CDs composite exhibits optimal electrocatalytic activity (with an overpotential of 400 mV in 1 M KOH at a current density of 10 mA cm-2) and high stability towards the OER. The good electrocatalytic activity of the composite is attributed to the small size of CoP and CDs and rapid electron transfer of CDs.

Nanostructured shuriken-like BiVO4 with preferentially exposed {010} facets: preparation, formation mechanism, and enhanced photocatalytic performance

The synthesis, formation mechanism, and application of nanostructured shuriken-like BiVO₄ with preferentially exposed {010} facets have been reported.

Dominance of Plasmonic Resonant Energy Transfer over Direct Electron Transfer in Substantially Enhanced Water Oxidation Activity of BiVO4 by Shape-Controlled Au Nanoparticles

The performance of plasmonic Au nanostructure/metal oxide heterointerface shows great promise in enhancing photoactivity, due to its ability to confine light to the small volume inside the semiconductor and modify the interfacial electronic band structure. While the shape control of Au nanoparticles (NPs) is crucial for moderate bandgap semiconductors, because plasmonic resonance by interband excitations overlaps above the absorption edge of semiconductors, its critical role in water splitting is still not fully understood. Here, first, the plasmonic effects of shape-controlled Au NPs on bismuth vanadate (BiVO₄ ) are studied, and a largely enhanced photoactivity of BiVO₄ is reported by introducing the octahedral Au NPs. The octahedral Au NP/BiVO₄ achieves 2.4 mA cm^-2 at the 1.23 V versus reversible hydrogen electrode, which is the threefold enhancement compared to BiVO₄ . It is the highest value among the previously reported plasmonic Au NPs/BiVO₄ . Improved photoactivity is attributed to the localized surface plasmon resonance; direct electron transfer (DET), plasmonic resonant energy transfer (PRET). The PRET can be stressed over DET when considering the moderate bandgap semiconductor. Enhanced water oxidation induced by the shape-controlled Au NPs is applicable to moderate semiconductors, and shows a systematic study to explore new efficient plasmonic solar water splitting cells.

Carbon Quantum Dots/TiOx Electron Transport Layer Boosts Efficiency of Planar Heterojunction Perovskite Solar Cells to 19

In planar n-i-p heterojunction perovskite solar cells, the electron transport layer (ETL) plays important roles in charge extraction and determine the morphology of the perovskite film. Here, we report a solution-processed carbon quantum dots (CQDs)/TiO₂ composite that has negligible absorption in the visible spectral range, a very attractive feature for perovskite solar cells. Using this novel CQDs/TiO₂ ETL in conjunction with a planar n-i-p heterojunction, we achieved an unprecedented efficiency of ∼19% under standard illumination test conditions. It was found that a CQDs/TiO₂ combination increases both the open circuit voltage and short-circuits current density as compared to using TiO₂ alone. Various advanced spectroscopic characterizations including ultrafast spectroscopy, ultraviolet photoelectron spectroscopy, and electronic impedance spectroscopy elucidate that the CQDs increases the electronic coupling between the CH₃NH₃PbI_3-xCl_x and TiO₂ ETL interface as well as energy levers that contribute to electron extraction.

Environment-Friendly Carbon Quantum Dots/ZnFe2O4 Photocatalysts: Characterization, Biocompatibility, and Mechanisms for NO Removal

A highly efficient and environmentally-friendly oxidation process is always desirable for air purification. This study reported a novel carbon quantum dots (CQDs)/ZnFe₂O₄ composite photocatalyst for the first time through a facile hydrothermal process. The CQDs/ZnFe₂O₄ (15 vol %) composite demonstrates stronger transient photocurrent response, approximately 8 times higher than that of ZnFe₂O₄, indicating superior transfer efficiency of photogenerated electrons and separation efficiency of photogenerated electron-hole pairs. Compared with pristine ZnFe₂O₄ nanoparticles, CQDs/ZnFe₂O₄ displayed enhanced photocatalytic activities on gaseous NO_x removal and high selectivity for nitrate formation under visible light (λ > 420 nm) irradiation. Electron spin resonance analysis and a series of radical-trapping experiments showed that the reactive species contributing to NO elimination were ·O₂^- and ·OH radicals. The possible mechanisms were proposed regarding how CQDs improve the photocatalytic performance of ZnFe₂O₄. The CQDs are believed to act as an electron reservoir and transporter as well as a powerful energy-transfer component during the photocatalysis processes over CQDs/ZnFe₂O₄ samples. Furthermore, the toxicity assessment authenticated good biocompatibility and low cytotoxity of CQDs/ZnFe₂O₄. The results of this study indicate that CQDs/ZnFe₂O₄ is a promising photocatalyst for air purification.

Carbon quantum dot sensitized Pt@Bi2WO6/FTO electrodes for enhanced photoelectro-catalytic activity of methanol oxidation

Carbon quantum dots (CQDs) sensitized Pt@Bi₂WO₆/FTO electrodes (simplified as CQDs-Pt@Bi₂WO₆/FTO) were prepared by loading platinum particles onto Bi₂WO₆ nanoplates via a photo-deposition method and sensitized CQDs via a dip-coating method.

Graphene quantum dot modified g-C3N4 for enhanced photocatalytic oxidation of ammonia performance

Graphene quantum dot modified g-C₃N₄ composite photocatalysts were prepared and their photocatalytic ammonia oxidation performances were studied.

BiOBr/BiOCl/carbon quantum dot microspheres with superior visible light-driven photocatalysis

In this paper, BiOBr/BiOCl/CQDs heterostructure microspheres were successfully synthesized via a facile solvothermal method.

Enhanced Photocatalytic Activity of the Carbon Quantum Dot-Modified BiOI Microsphere

Novel carbon quantum dot (CQD)-modified BiOI photocatalysts were prepared via a facile hydrothermal process. The CQD-modified BiOI materials were characterized by multiple techniques. The CQD with an average size around several nanometers was distributed on the surface of BiOI microsphere. Its photocatalytic activity was investigated sufficiently by the photodegradation of methylene orange (MO). The results showed that the CQD/BiOI 1.5 wt.% sample exhibited the optimum photocatalytic activity, which was 2.5 times that of the pure BiOI. This improvement was attributed to the crucial role of CQDs, which could be acted as a photocenter for absorbing solar light, charge separation center for suppressing charge recombination.