Biofabrication of bimetallic selenium@zinc nanoparticles using Champia parvula aqueous extract: Investigation of anticancer activity and its apoptosis induction

Selenium@zinc nanoparticles, or Se@Zn NPs, are extensively employed in various environmental, industrial and biological domains. However, the biological potential of Se@Zn NPs has not been thoroughly investigated. This study focused on fabricating Se@Zn NPs from algae using an aqueous extract of Champia parvula seaweed. Analytical techniques were used to describe the successfully synthesized Se@Zn NPs. In addition, a biological function analysis of the Se@Zn NPs was conducted. The Ultraviolet-visible spectroscopy (UV-vis) spectrum showed a specific absorbance peak for the Se@Zn NPs at 350-400 nm. The biomolecules involved in forming Se@Zn NPs were identified by their potential functional groups, as revealed by Fourier transform infrared spectroscopy (FTIR). By scanning electron microscopy (SEM) and transmission electron microscopy (TEM), Se@Zn NPs were shown to be spherical and to have a diameter range of 100-200 nm. NPs with a crystallite diameter of 54.8 nm and chemical compositions of zinc and selenium (1:1.5 ratio) were revealed by X-ray diffraction analysis (XRD) and energy dispersive x-ray spectroscopy (EDS). IC50 values were determined for the anticancer activity against A549, MCF-7 and HeLa cells. Cell morphological changes in fluorescence microscopy and apoptosis mechanisms by flow cytometry analysis were investigated, which show that Se@Zn NPs induced apoptosis in various cancer cells. DNA fragmentation and ROS levels were studied by fluorescence microscopy. In conclusion, conditions required for therapeutic and preventative applications may be met by the green synthesis of Se@Zn NPs.

Preparation and anti-tumor activity of paclitaxel silk protein nanoparticles encapsulated by biofilm

In order to overcome the poor bioavailability of paclitaxel (PTX), in this study, self-assembled paclitaxel silk fibronectin nanoparticles (PTX-SF-NPs) were encapsulated with outer membrane vesicles of Escherichia coli (E. coil), and biofilm-encapsulated paclitaxel silk fibronectin nanoparticles (OMV-PTX-SF-NPs) were prepared by high-pressure co-extrusion, the size and zeta potential of the OMV-PTX-SF-NPs were measured. The antitumor effects of OMV-PTX-SF-NPs were evaluated by cellular and pharmacodynamic assays, and pharmacokinetic experiments were performed. The results showed that hydrophobic forces and hydrogen bonding played a major role in the interaction between paclitaxel and filipin proteins, and the size of OMV-PTX-SF-NPs was 199.8 ± 2.8 nm, zeta potential was -17.8 ± 1.3 mv. The cellular and in vivo pharmacokinetic assays demonstrated that the OMV-PTX-SF-NPs possessed a promising antitumor effect. Pharmacokinetic experiments showed that the AUC0-∞ of OMV-PTX-SF-NPs was 5.314 ± 0.77, which was much larger than that of free PTX, which was 0.744 ± 0.14. Overall, we have successfully constructed a stable oral formulation of paclitaxel with a sustained-release effect, which is able to effectively increase the bioavailability of paclitaxel, improve the antitumor activity, and reduce the adverse effects.

Functionalising silk hydrogels with hetero- and homotypic nanoparticles

Despite many reports detailing silk hydrogels, the development of composite silk hydrogels with homotypic and heterotypic silk nanoparticles and their impact on material mechanics and biology have remained largely unexplored. We hypothesise that the inclusion of nanoparticles into silk-based hydrogels enables the formation of homotropic and heterotropic material assemblies. The aim was to explore how well these systems allow tuning of mechanics and cell adhesion to ultimately control the cell-material interface. We utilised nonporous silica nanoparticles as a standard reference and compared them to nanoparticles derived from Bombyx mori silk and Antheraea mylitta (tasar) silk (approximately 100-150 nm in size). Initially, physically cross-linked B. mori silk hydrogels were prepared containing silica, B. mori silk nanoparticles, or tasar silk nanoparticles at concentrations of either 0.05% or 0.5% (w/v). The initial modulus (stiffness) of these nanoparticle-functionalised silk hydrogels was similar. Stress relaxation was substantially faster for nanoparticle-modified silk hydrogels than for unmodified control hydrogels. Increasing the concentrations of B. mori silk and silica nanoparticles slowed stress relaxation, while the opposite trend was observed for hydrogels modified with tasar nanoparticles. Cell attachment was similar for all hydrogels, but proliferation during the initial 24 h was significantly improved with the nanoparticle-modified hydrogels. Overall, this study demonstrates the manufacture and utilisation of homotropic and heterotropic silk hydrogels.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

Silk Bioconjugates: From Chemistry and Concept to Application

Medical silks have captured global interest. While silk sutures have a long track record in humans, silk bioconjugates are still in preclinical development. This perspective examines key advances in silk bioconjugation, including the fabrication of silk-protein conjugates, bioconjugated silk particles, and bioconjugated substrates to enhance cell-material interactions in two and three dimensions. Many of these systems rely on chemical modification of the silk biopolymer, often using carbodiimide and reactive ester chemistries. However, recent progress in enzyme-mediated and click chemistries has expanded the molecular toolbox to enable biorthogonal, site-specific conjugation in a single step when combined with recombinant silk fibroin tagged with noncanonical amino acids. This perspective outlines key strategies available for chemical modification, compares the resulting silk conjugates to clinical benchmarks, and outlines open questions and areas that require more work. Overall, this assessment highlights a domain of new sunrise capabilities and development opportunities for silk bioconjugates that may ultimately offer new ways of delivering improved healthcare.

State-of-the-art advances in nanocomposite and bio-nanocomposite polymeric materials: A comprehensive review

The modern eco-friendly materials used in research and innovation today consist of nanocomposites and bio-nanocomposite polymers. Their unique composite properties make them suitable for various industrial, medicinal, and energy applications. Bio-nanocomposite polymers are made of biopolymer matrices that have nanofillers dispersed throughout them. There are several types of fillers that can be added to polymers to enhance their quality, such as cellulose-based fillers, clay nanomaterials, carbon black, talc, carbon quantum dots, and many others. Biopolymer-based nanocomposites are considered a superior alternative to traditional materials as they reduce reliance on fossil fuels and promote the use of renewable resources. This review covers the current state-of-the-art in nanocomposite and bio-nanocomposite materials, focusing on ways to improve their features and the various applications they can be used for. The review article also investigates the utilization of diverse nanocomposites as a viable approach for developing bio-nanocomposites. It delves into the underlying principles that govern the synthesis of these materials and explores their prospective applications in the biomedical field, food packaging, sensing (Immunosensors), and energy storage devices. Lastly, the review discusses the future outlook and current challenges of these materials, with a focus on sustainability.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

Protein-polysaccharide nanoconjugates: Potential tools for delivery of plant-derived nutraceuticals

Protein-polysaccharide nanoconjugates are covalently interactive networks that are currently the subject of intense research owing to their emerging applications in the food nanotechnology field. Due to their biocompatibility and biodegradability properties, they have played a significant role as wall materials for the formation of various nanostructures to encapsulate nutraceuticals. The food-grade protein-polysaccharide nanoconjugates would be employed to enhance the delivery and stability of nutraceuticals for their real use in the food industry. The most common edible polysaccharides (cellulose, chitosan, pectin, starch, carrageenan, fucoidan, mannan, glucomannan, and arabic gum) and proteins (silk fibroin, collagen, gelatin, soy protein, corn zein, and wheat gluten) have been used as potential building blocks in nano-encapsulation systems because of their excellent physicochemical properties. This article broadens the discussion of food-grade proteins and polysaccharides as nano-encapsulation biomaterials and their fabrication methods, along with a review of the applications of protein-polysaccharide nanoconjugates in the delivery of plant-derived nutraceuticals.

Optimized silk fibroin nanoparticle functionalization with anti-CEA nanobody enhancing active targeting of colorectal cancer cells

This work aimed to establish a simple and feasible method to obtain silk fibroin nanoparticles (SFNPs) with uniform particles size, and then modify the SFNPs with nanobody (Nb) 11C12 targeting the proximal membrane end of carcinoembryonic antigen on the surface of colorectal cancer (CRC) cells. The regenerated silk fibroin (SF) was isolated using ultrafiltration tubes with a 50 kDa molecular weight cut-off, and the retention fraction (named as SF > 50 kDa) was further self-assembled into SFNPs by ethanol induction. Scanning electron microscope (SEM) and high-resolution transmission electron microscop showed that the SFNPs with uniform particles size were formed. Due to electrostatic adsorption and pH responsiveness, SFNPs have been proved to effectively load and release the anticancer drug doxorubicin hydrochloride (DOX) (DOX@SFNPs). Further, targeting molecule Nb 11C12 was used to modify these nanoparticles, constituting the targeted outer layer of the drug delivery system (DOX@SFNPs-11C12), achieving precise localization to cancer cells. The release amount of DOX observed fromin vitrodrug release profiles increased as follows: pH 7.4 < pH 6.8 < pH 5.4, demonstrating that the DOX release could be accelerated in a weakly acidic environment.In vitrocytotoxicity experiments displayed that SFNPs-11C12 nanoparticles exhibited good safety and biocompatibility. Drug-loaded nanoparticles, DOX@SFNPs-11C12, led to higher LoVo cells apoptosis compared to DOX@SFNPs. Fluorescence spectrophotometer characterization and confocal laser scanning microscopy further showed that the internalization of DOX was highest in the DOX@SFNPs-11C12, certifying that the introduced targeting molecule enhanced the uptake of drug delivery system by LoVo cells. This study provides a simple and operational approach to developing an optimized SFNPs drug delivery system modified by targeting Nb, which can be a good candidate for CRC therapy.

Onto the differences in formulating micro-/nanoparticulate drug delivery system from Thai silk and Vietnamese silk: A critical comparison

Silk fibroin is a natural polymer with physicochemical properties heavily dependent on its silkworm sources and cultivation conditions. Hence, this study critically compared the characteristics and capacity to generate micro-/nanoparticles of fibroin extracted from the Thai silk and Vietnamese silk. Both Thai fibroin (SFT) and Vietnamese fibroin (SFV) were extracted and fabricated into micro-/nanoparticles using the same methods of desalination and condensation, respectively. Firstly, the amino acid compositions of SFT and SFV were determined and found to be similar, suggesting that the different cultivation conditions did not alter the fibroin chemical contents. Secondly, utilizing various analytical techniques, the SFT structure revealed less heavy chains, more light chains and P-25 glycoproteins, and lower crystallinity than those of SFV. Accordingly, compared to the particles formed by SFT, the SFV-based particles were significantly bigger (∼1700 nm vs. ∼150 nm), and possessed less drug (Amphotericin B) entrapment efficiency (64.3 ± 4.4% vs. 79.3 ± 5.1%), higher hemototoxicity, and less biostability in the blood. Conclusively, these differences add more insights for the appropriate applications of each fibroin kind to best promote its qualities and effectiveness.

Silk chemistry and biomedical material designs

Silk fibroin has applications in different medical fields such as tissue engineering, regenerative medicine, drug delivery and medical devices. Advances in silk chemistry and biomaterial designs have yielded exciting tools for generating new silk-based materials and technologies. Selective chemistries can enhance or tune the features of silk, such as mechanics, biodegradability, processability and biological interactions, to address challenges in medically relevant materials (hydrogels, films, sponges and fibres). This Review details the design and utility of silk biomaterials for different applications, with particular focus on chemistry. This Review consists of three segments: silk protein fundamentals, silk chemistries and functionalization mechanisms. This is followed by a description of different crosslinking chemistries facilitating network formation, including the formation of composite biomaterials. Utility in the fields of tissue engineering, drug delivery, 3D printing, cell coatings, microfluidics and biosensors are highlighted. Looking to the future, we discuss silk biomaterial design strategies to continue to improve medical outcomes.

Folic Acid-Modified Ibrutinib-Loaded Silk Fibroin Nanoparticles for Cancer Cell Therapy with Over-Expressed Folate Receptor

The anticancer drug ibrutinib (IB), also known as PCI-32765, is a compound that irreversibly inhibits Bruton's tyrosine kinase (BTK) and was initially developed as a treatment option for B-cell lineage neoplasms. Its action is not limited to B-cells, as it is expressed in all hematopoietic lineages and plays a crucial role in the tumor microenvironment. However, clinical trials with the drug have resulted in conflicting outcomes against solid tumors. In this study, folic acid-conjugated silk nanoparticles were used for the targeted delivery of IB to the cancer cell lines HeLa, BT-474, and SKBR3 by exploiting the overexpression of folate receptors on their surfaces. The results were compared with those of control healthy cells (EA.hy926). Cellular uptake studies confirmed total internalization of the nanoparticles functionalized by this procedure in the cancer cells after 24 h, compared to nanoparticles not functionalized with folic acid, suggesting that cellular uptake was mediated by folate receptors overexpressed in the cancer cells. The results indicate that the developed nanocarrier can be used for drug targeting applications by enhancing IB uptake in cancer cells with folate receptor overexpression.

Research progress of natural silk fibroin and the appplication for drug delivery in chemotherapies

Silk fibroin has been widely used in biological fields due to its biocompatibility, mechanical properties, biodegradability, and safety. Recently, silk fibroin as a drug carrier was developed rapidly and achieved remarkable progress in cancer treatment. The silk fibroin-based delivery system could effectively kill tumor cells without significant side effects and drug resistance. However, few studies have been reported on silk fibroin delivery systems for antitumor therapy. The advancement of silk fibroin-based drug delivery systems research and its applications in cancer therapy are highlighted in this study. The properties, applications, private opinions, and future prospects of silk fibroin carriers are discussed to understand better the development of anti-cancer drug delivery systems, which may also contribute to advancing silk fibroin innovation.

Nonmulberry silk fibroin-based biomaterials: Impact on cell behavior regulation and tissue regeneration

Silk fibroin (SF) is a promising biomaterial due to its good biocompatibility, easy availability, and high mechanical properties. Compared with mulberry silk fibroin (MSF), nonmulberry silk fibroin (NSF) isolated from typical nonmulberry silkworm silk exhibits unique arginine-glycine-aspartic acid (RGD) sequences with favorable cell adhesion enhancing effect. This inherent property probably makes the NSF more suitable for cell culture and tissue regeneration-related applications. Accordingly, various types of NSF-based biomaterials, such as particles, films, fiber mats, and 3D scaffolds, are constructed and their application potential in different biomedical fields is extensively investigated. Based on these promising NSF biomaterials, this review firstly makes a systematical comparison between the molecular structure and properties of MSF and typical NSF and highlights the unique properties of NSF. In addition, we summarize the effective fabrication strategies from degummed nonmulberry silk fibers to regenerated NSF-based biomaterials with controllable formats and their recent application progresses in cell behavior regulation and tissue regeneration. Finally, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials are discussed. Related research and perspectives may provide valuable references for designing and modifying effective NSF-based and other natural biomaterials. STATEMENT OF SIGNIFICANCE: There exist many reviews about mulberry silk fibroin (MSF) biomaterials and their biomedical applications, while that about nonmulberry silk fibroin (NSF) biomaterials is scarce. Compared with MSF, NSF exhibits unique arginine-glycine-aspartic acid sequences with promising cell adhesion enhancing effect, which makes NSF more suitable for cell culture and tissue regeneration related applications. Focusing on these advanced NSF biomaterials, this review has systematically compared the structure and properties of MSF and NSF, and emphasized the unique properties of NSF. Following that, the effective construction strategies for NSF-based biomaterials are summarized, and their recent applications in cell behavior regulations and tissue regenerations are highlighted. Furthermore, current challenges and future perspectives for the fabrication and application of NSF-based biomaterials were discussed.

Biodegradable Silk Fibroin Nanocarriers to Modulate Hypoxia Tumor Microenvironment Favoring Enhanced Chemotherapy

Biopolymer silk fibroin (SF) is a great candidate for drug carriers characterized by its tunable biodegradability, and excellent biocompatibility properties. Recently, we have constructed SF-based nano-enabled drug delivery carriers, in which doxorubicin (Dox) and atovaquone (Ato) were encapsulated with Arg-Gly-Asp-SF-Polylactic Acid (RSA) to form micellar-like nanoparticles (RSA-Dox-Ato NPs). The RGD peptide was decorated on micellar-like nanoparticles, promoting tumor accumulation of the drug. Meanwhile, Ato, as a mitochondrial complex III inhibitor inhibiting mitochondrial respiration, would reverse the hypoxia microenvironment and enhance chemotherapy in the tumor. In vitro, the biopolymer alone showed extremely low cytotoxicity to 4T1 cell lines, while the RSA-Dox-Ato demonstrated a higher inhibition rate than other groups. Most significantly, the ROS levels in cells were obviously improved after being treated with RSA-Dox-Ato, indicating that the hypoxic microenvironment was alleviated. Eventually, SF-based targeted drug carrier provides biocompatibility to reverse hypoxia microenvironment in vivo for enhancing chemotherapy, strikingly suppressing tumor development, and thereby suggesting a promising candidate for drug delivery system.

Fabrication of novel ruthenium loaded silk fibroin nanomaterials for fingolimod release improved antitumor efficacy in hepatocellular carcinoma

Cancer targeted nanomaterials-based drug delivery systems have been described as promising. In this work, we employed silk fibroin (SF), ruthenium nanomaterials (RuNMs), heptapeptide (T7), and fingolimod (FTY720) to construct a pH-responsive smart nanomaterials drug delivery system. They were spherical with a mean size of around 120 nm, which may have contributed to the improved penetration and retention of the NMs in tumour areas. T7-FTY720@SF-RuNMs had an encapsulation efficiency (EE) of 72.51 ± 4.02%. When the pH of an environment is acidic, the release of FTY720 from nanocarriers is enhanced. T7-FTY720@SF-RuNMs demonstrated increased cellular uptake selective and anticancer efficacy for hepatocellular cancer in both in vitro and in vivo experiments. Additionally, the in vivo biodistribution investigation showed that T7-FTY720@SF-RuNMs could efficiently aggregate in the tumour location, improving their in vivo potential to kill cancer cells. T7-FTY720@SF-RuNMs demonstrated little toxicity to tumour-bearing animals in investigations of histology and immunohistochemistry, showing that the fabricated NMs are biocompatible in vivo. For the treatment of hepatocellular cancer, the T7-FTY720@SF-RuNMs delivery method offers significant promise.

Volumetric Scalability of Microfluidic and Semi-Batch Silk Nanoprecipitation Methods

Silk fibroin nanoprecipitation by organic desolvation in semi-batch and microfluidic formats provides promising bottom-up routes for manufacturing narrow polydispersity, spherical silk nanoparticles. The translation of silk nanoparticle production to pilot, clinical, and industrial scales can be aided through insight into the property drifts incited by nanoprecipitation scale-up and the identification of critical process parameters to maintain throughout scaling. Here, we report the reproducibility of silk nanoprecipitation on volumetric scale-up in low-shear, semi-batch systems and estimate the reproducibility of chip parallelization for volumetric scale-up in a high shear, staggered herringbone micromixer. We showed that silk precursor feeds processed in an unstirred semi-batch system (mixing time > 120 s) displayed significant changes in the nanoparticle physicochemical and crystalline properties following a 12-fold increase in volumetric scale between 1.8 and 21.9 mL while the physicochemical properties stayed constant following a further 6-fold increase in scale to 138 mL. The nanoparticle physicochemical properties showed greater reproducibility after a 6-fold volumetric scale-up when using lower mixing times of greater similarity (8.4 s and 29.4 s) with active stirring at 400 rpm, indicating that the bulk mixing time and average shear rate should be maintained during volumetric scale-up. Conversely, microfluidic manufacture showed high between-batch repeatability and between-chip reproducibility across four participants and microfluidic chips, thereby strengthening chip parallelization as a production strategy for silk nanoparticles at pilot, clinical, and industrial scales.

Systemic and Local Silk-Based Drug Delivery Systems for Cancer Therapy

For years, surgery, radiotherapy, and chemotherapy have been the gold standards to treat cancer, although continuing research has sought a more effective approach. While advances can be seen in the development of anticancer drugs, the tools that can improve their delivery remain a challenge. As anticancer drugs can affect the entire body, the control of their distribution is desirable to prevent systemic toxicity. The application of a suitable drug delivery platform may resolve this problem. Among other materials, silks offer many advantageous properties, including biodegradability, biocompatibility, and the possibility of obtaining a variety of morphological structures. These characteristics allow the exploration of silk for biomedical applications and as a platform for drug delivery. We have reviewed silk structures that can be used for local and systemic drug delivery for use in cancer therapy. After a short description of the most studied silks, we discuss the advantages of using silk for drug delivery. The tables summarize the descriptions of silk structures for the local and systemic transport of anticancer drugs. The most popular techniques for silk particle preparation are presented. Further prospects for using silk as a drug carrier are considered. The application of various silk biomaterials can improve cancer treatment by the controllable delivery of chemotherapeutics, immunotherapeutics, photosensitizers, hormones, nucleotherapeutics, targeted therapeutics (e.g., kinase inhibitors), and inorganic nanoparticles, among others.

Nonmulberry silk proteins: multipurpose ingredient in bio-functional assembly

The emerging field of tissue engineering and regenerative medicines utilising artificial polymers is facing many problems. Despite having mechanical stability, non-toxicity and biodegradability, most of them lack cytocompatibility and biocompatibility. Natural polymers (such as collagen, hyaluronic acid, fibrin, fibroin, and others), including blends, are introduced to the field to solve some of the relevant issues. Another natural biopolymer: silkworm silk gained special attention primarily due to its specific biophysical, biochemical, and material properties, worldwide availability, and cost-effectiveness. Silk proteins, namely fibroin and sericin extracted from domesticated mulberry silkwormBombyx mori, are studied extensively in the last few decades for tissue engineering. Wild nonmulberry silkworm species, originated from India and other parts of the world, also produce silk proteins with variations in their nature and properties. Among the nonmulberry silkworm species,Antheraea mylitta(Indian Tropical Tasar),A. assamensis/A. assama(Indian Muga), andSamia ricini/Philosamia ricini(Indian Eri), along withA. pernyi(Chinese temperate Oak Tasar/Tussah) andA. yamamai(Japanese Oak Tasar) exhibit inherent tripeptide motifs of arginyl glycyl aspartic acid in their fibroin amino acid sequences, which support their candidacy as the potential biomaterials. Similarly, sericin isolated from such wild species delivers unique properties and is used as anti-apoptotic and growth-inducing factors in regenerative medicines. Other characteristics such as biodegradability, biocompatibility, and non-inflammatory nature make it suitable for tissue engineering and regenerative medicine based applications. A diverse range of matrices, including but not limited to nano-micro scale structures, nanofibres, thin films, hydrogels, and porous scaffolds, are prepared from the silk proteins (fibroins and sericins) for biomedical and tissue engineering research. This review aims to represent the progress made in medical and non-medical applications in the last couple of years and depict the present status of the investigations on Indian nonmulberry silk-based matrices as a particular reference due to its remarkable potentiality of regeneration of different types of tissues. It also discusses the future perspective in tissue engineering and regenerative medicines in the context of developing cutting-edge techniques such as 3D printing/bioprinting, microfluidics, organ-on-a-chip, and other electronics, optical and thermal property-based applications.

In vitro coronal protein signatures and biological impact of silver nanoparticles synthesized with different natural polymers as capping agents

Biopolymer-capped particles, sodium alginate-, gelatin- and reconstituted silk fibroin-capped nanosilver (AgNPs), were synthesized with an intention to study, simultaneously, their in vitro and in vivo haemocompatibility, one of the major safety factors in biomedical applications. Solid state characterization showed formation of spherical nanoparticles with 5 to 30 nm primary sizes (transmission electron microscopy) and X-ray photoelectron spectroscopy analysis of particles confirmed silver bonding with the biopolymer moieties. The degree of aggregation of the biopolymer-capped AgNPs in the synthesis medium (ultrapure water) is relatively low, with comparable hydrodynamic size with those of the control citrate-stabilized NPs, and remained relatively unchanged even after 6 weeks. The polymer-capped nanoparticles showed different degrees of aggregation in biologically relevant media - PBS (pH 7.4) and 2% human blood plasma - with citrate- (control) and alginate-capped particles showing the highest aggregation, while gelatin- and silk fibroin-capped particles revealed better stability and less aggregation in these media. In vitro cytotoxicity studies revealed that the polymer-capped particles exhibited both concentration and (hydrodynamic) size-dependent haemolytic activity, the extent of which was higher (up to 100% in some cases) in collected whole blood samples of healthy human volunteers when compared to that in the washed erythrocytes. This difference is thought to result from the detected protein corona formation on the nanoparticle surface in the whole blood system, which was associated with reduced particle aggregation, causing more severe cytotoxic effects. At the tested particle concentration range in vitro, we observed a negligible haemolysis effect in vivo (Balb/c mice). Polymer-capped particles did accumulate in organs, with the highest levels detected in the liver (up to 422 μg per g tissue), yet no adverse behavioural effects were observed in the mice during the duration of the nanoparticle exposure.

Breast tumor-on-chip models: From disease modeling to personalized drug screening

Breast cancer is one of the leading causes of mortality worldwide being the most common cancer among women. Despite the significant progress obtained during the past years in the understanding of breast cancer pathophysiology, women continue to die from it. Novel tools and technologies are needed to develop better diagnostic and therapeutic approaches, and to better understand the molecular and cellular players involved in the progression of this disease. Typical methods employed by the pharmaceutical industry and laboratories to investigate breast cancer etiology and evaluate the efficiency of new therapeutic compounds are still based on traditional tissue culture flasks and animal models, which have certain limitations. Recently, tumor-on-chip technology emerged as a new generation of in vitro disease model to investigate the physiopathology of tumors and predict the efficiency of drugs in a native-like microenvironment. These microfluidic systems reproduce the functional units and composition of human organs and tissues, and importantly, the rheological properties of the native scenario, enabling precise control over fluid flow or local gradients. Herein, we review the most recent works related to breast tumor-on-chip for disease modeling and drug screening applications. Finally, we critically discuss the future applications of this emerging technology in breast cancer therapeutics and drug development.

Combination Therapy of Breast Cancer by Codelivery of Doxorubicin and Survivin siRNA Using Polyethylenimine Modified Silk Fibroin Nanoparticles

Here, polyethylenimine (PEI) modified silk fibroin nanoparticles (SFNPs) were prepared for codelivery of doxorubicin (DOX) and survivin siRNA. The prepared NPs were characterized in terms of stability and structural, functional, and physicochemical properties. Moreover, the ability of the conjugate to escape from the endosome and cellular uptake were assessed. Afterward, the in vivo therapeutic efficacy was analyzed in the mice model. The siRNA loaded PEI-SFNPs showed acceptable size, zeta potential, and stability in serum. It also effectively induced apoptosis in the 4T1 mouse mammary tumor cell line. Cellular uptake and endosomal escape analyses confirmed that PEI-SFNPs containing siRNA could escape from the endosome and accumulate in the cytoplasm of 4T1 cells. Real time-PCR indicated the significant decrease in the expression of survivin mRNA in the 4T1 cell line 48 h postincubation with siRNA loaded PEI-SFNPs. In vivo biodistribution of PEI-SFNPs confirmed higher accumulation of SFNPs in the tumor site compared with other organs. The codelivery systems remarkably reduced the growth rate of breast tumor in the mice model without any obvious weight lost. Histopathological and tunnel staining exhibited more apoptotic tumor cells in the group containing both DOX and survivin siRNA. Tumorigenic breast tissue resected from the animals after treatment with siRNA also exhibited significant suppression of survivin gene. In conclusion, the prepared drug delivery system had an acceptable potential in tumor removal, apoptosis induction in cancer cells, and therapeutic efficacy. Thus, it would be a good candidate for breast cancer therapy.

A doxorubicin-platinum conjugate system: impacts on PI3K/AKT actuation and apoptosis in breast cancer cells

In recent years, the development of a nano-conjugate system for drug delivery applications has gained attention among researchers. Keeping this in mind, in this study, we developed a doxorubicin-platinum conjugate system that targeted breast cancer cell lines. To achieve this, we developed platinum nanoparticles using polyvinylpyrrolidone (PVP). High resolution-transmission electron microscopy (HR-TEM) revealed the occurrence of octopod-shaped platinum nanoparticles. Subsequently, doxorubicin (DOX) was conjugated on the surface of the as-prepared platinum octopods via an in situ stirring method. The physicochemical characterization of the doxorubicin-platinum conjugate system revealed that the PVP of PtNPs interacts with the NH2 group of doxorubicin via electrostatic interaction/hydrogen bonding. Besides, the doxorubicin-platinum conjugate system exhibited a sustained drug release profile within the cancer cells. Furthermore, the evaluation of the in vitro anticancer efficacy of the doxorubicin-platinum conjugate system in breast cancer cells (MCF-7 and MDA-MB-231) unveiled the induction of apoptosis via intracellular ROS and DNA damage, rather than free DOX and PtNPs. Remarkably, we also perceived that the doxorubicin-platinum conjugate system was strong enough to down-regulate the PI3K/AKT signalling pathway. As a result, the tumour suppressor gene PTEN was activated, which led to the stimulation of a mitochondrion-based intrinsic apoptotic pathway and its downstream caspases, triggering cell death. Hence, our findings suggested that a biologically stable doxorubicin-platinum conjugate system could be an imperative therapeutic agent for anticancer therapy in the near future.

Silk Protein Paper with In Situ Synthesized Silver Nanoparticles

Silver nanoparticles (AgNPs) are in situ synthesized for the first time on microfibrillated silk (MFS) exfoliated from domesticated Philosamia cynthia ricini (eri) and Bombyx mori (mulberry) silkworm silk fibers. The process is rapid (hours time), does not rely on harmful chemicals, and produces robust and flexible AgNPs coated MFS (MFS-AgNPs) protein papers with excellent handling properties. None of these can be achieved by approaches used in the past to fabricate AgNPs silk systems. MFS bonds the AgNPs strongly, providing good support and stabilization for the NPs, leading to strong wash fastness. The mechanical properties of the MFS-AgNPs papers largely do not change compared to the MFS papers without nanoparticles, except for some higher concentration of AgNPs in the case of mulberry silk. The improved tensile properties of eri silk papers with or without AgNPs compared to mulberry silk papers can be attributed to the higher degree of fibrillation achieved in eri silk and its inherent higher ductility. MFS-AgNPs from eri silk also exhibit strong antibacterial activity. This study provides the basis for the development of smart protein papers based on silk fiber and functional nanomaterials.

Silk Particles as Carriers of Therapeutic Molecules for Cancer Treatment

Although progress is observed in cancer treatment, this disease continues to be the second leading cause of death worldwide. The current understanding of cancer indicates that treating cancer should not be limited to killing cancer cells alone, but that the target is the complex tumor microenvironment (TME). The application of nanoparticle-based drug delivery systems (DDS) can not only target cancer cells and TME, but also simultaneously resolve the severe side effects of various cancer treatment approaches, leading to more effective, precise, and less invasive therapy. Nanoparticles based on proteins derived from silkworms' cocoons (like silk fibroin and sericins) and silk proteins from spiders (spidroins) are intensively explored not only in the oncology field. This natural-derived material offer biocompatibility, biodegradability, and simplicity of preparation methods. The protein-based material can be tailored for size, stability, drug loading/release kinetics, and functionalized with targeting ligands. This review summarizes the current status of drug delivery systems' development based on proteins derived from silk fibroin, sericins, and spidroins, which application is focused on systemic cancer treatment. The nanoparticles that deliver chemotherapeutics, nucleic acid-based therapeutics, natural-derived agents, therapeutic proteins or peptides, inorganic compounds, as well as photosensitive molecules, are introduced.

Chlorotoxin modified morusin-PLGA nanoparticles for targeted glioblastoma therapy

Malignant brain tumors remain a major cause of concern and mortality as successful treatment is hindered due to the poor transport and low penetration of chemotherapeutics across the blood-brain barrier (BBB). In this study, a nano formulation composed of chlorotoxin (CTX)-conjugated morusin loaded PLGA nanoparticles (PLGA-MOR-CTX) was devised against Glioblastoma Multiforme (GBM) and its anti-proliferative effects were evaluated in vitro. The synthesized nanoparticles were loaded with morusin, a naturally derived chemotherapeutic drug, and surface conjugated with CTX, a peptide derived from scorpion venom, highly specific for chloride channels (CIC-3) expressed in glioma tumor cells, as well as for matrix metalloproteinase (MMP-2), which is up regulated in the tumor microenvironment. Subsequently, the anti-cancer potential of the NPs was assessed in U87 and GI-1 (human glioblastoma) cells. Antiproliferative, cell apoptosis, and other cell-based assays demonstrated that the PLGA-MOR-CTX NPs resulted in enhanced inhibitory effects on U87 and GI-1 glioma cells. Prominent cytotoxicity parameters such as ROS generation, enhanced caspase activity, cytoskeletal destabilization, and inhibition of MMP-activity were observed in glioblastoma cells upon PLGA-MOR-CTX NP treatment. The cytocompatibility observed with normal human neuronal cells (HCN-1A) and the enhanced lethal effects in glioblastoma cells highlight the potential of PLGA-MOR-CTX nanoparticles as promising therapeutic nanocarriers towards GBM.

Surface modified silk fibroin nanoparticles for improved delivery of doxorubicin: Development, characterization, in-vitro studies

Silk fibroin nanoparticles possess the hydrophobic nature which assists them to become a good substrate for reticulo-endothelial system (RES) and macrophageal uptake. Surface coating of these nanoparticles with hydrophilic stabilizers, like Tween-80 make them long circulating and facilitate their uptake by low density lipoprotein (LDL) receptors to cross blood brain barrier (BBB). Surface modified silk fibroin nanoparticles bearing anti-cancer agent doxorubicin (DOX) were fabricated by desolvation method and coated with Tween-80 as surface modifier. The prepared nanoparticles were characterized for various physicochemical parameters, like particle size, surface charge, surface morphology by scanning electron microscope (SEM) and transmission electron microscopy (TEM), and in vitro drug release along with in vitro cell cytotoxicity, flow cytometry and cellular uptake studies by flourocytometry on glioblastoma cell lines. Entrapment efficiency for the silk fibroin nanoparticles were found to be >85% for coated and uncoated nanoparticles. Nanoparticles with average diameter less than 150 nm having negative charge were found to show no toxicity of its own. The pro-inflammatory response of nanoparticles was observed by determining the cytokines level, such as TNF-α and IL-1β. Sustained drug release pattern from the nanoparticles with better cytotoxicty as compared to free drug was observed, signifying their potential ability to work as a drug delivery system.

In Vitro MCF-7 Cells Apoptosis Analysis of Carboplatin Loaded Silk Fibroin Particles

Breast cancer ranks as the fifth leading cause of death worldwide. Chemotherapy is commonly used directly or as neo-adjuvant therapy for the management of breast cancer with its attendant adverse effects, underscoring the need to develop biocompatible bioactive compounds for pharmacological applications. The aim of this study is to encapsulate carboplatin (CP) with silk fibroin protein (SF) by using an ionic gelation method as a drug carrier system and assess the apoptotic effect on MCF-7 breast cancer cells during in vitro studies. The characterization of silk fibroin encapsulated carboplatin (SFCP) microparticles was analyzed by FTIR spectrophotometer, SEM, Mastersizer, and biodegradation methods. The encapsulation efficiency and release profile of SFCP microparticles were analyzed by an indirect UV-Vis spectrophotometric method. An apoptotic screening of MCF-7 cells was carried out with 10-200 µg/mL CP loaded SFCP, which were cultured for 24, 48, and 72 h. Data were analyzed using the Student's t test and analysis of variance. FTIR and drug release studies confirmed an interaction of silk fibroin with the carboplatin moiety. SFCP showed successful encapsulation of the carboplatin moiety. Apoptotic screening showed a dose dependent increase in absorbance, indicating significant cell death (p < 0.05). Thus, the direct apoptotic effect of SFCP microparticles on MCF-7 was confirmed.

Novel non-mulberry silk fibroin nanoparticles with enhanced activity as potential candidate in nanocarrier mediated delivery system

Silk fibroin (SF) is well known for its excellent biocompatible properties facilitating its application in the field of biomedical engineering through different biomaterial fabrications in the recent era. Here in this study, novel nanoparticles from non-mulberry SF of Antheraea assamensis were fabricated, characterized and evaluated for its applicability as nanocarrier. Fabricated nanoparticles were initially compared with prevailing SF nanoparticles from Bombyx mori. Fabricated A. assamensis silk fibroin nanoparticles (AA-SFNps) were found to be lesser in size (80-300 nm in diameter) than B. mori silk fibroin nanoparticles (BM-SFNps) (120-500 nm in diameter). When checked for stability, AA-SFNps were found to be more stable than BM-SFNps in biological media. FTIR and XRD studies revealed persistence of structural properties even after fabrication. TGA and DSC studies showed AA-SFNps to be thermally more stable than BM-SFNps without any cytotoxicity (MTT assay). On loading with model drug Doxorubicin hydrochloride (DOX), AA-SFNps exhibited an encapsulation efficiency of 94.47% with 11.81% loading of the anticancer drug. Cumulative release study revealed highest percentage release of DOX (42.1 ± 0.4%) at pH 5.2 on day 7 in comparison to pH 7.4 and 8.0. Sustained release profile of the DOX loaded AA-SFNps (AA-SFNps-DOX) was clearly reflected and it was found to be highly cytotoxic against triple negative MDA-MB-231 cells in comparison to free DOX at different time points. Overall, this study showed the efficacy of the AA-SFNps as a nanocarrier for future drug delivery applications.

The controlled design of electrospun PCL/silk/quercetin fibrous tubular scaffold using a modified wound coil collector and L-shaped ground design for neural repair

Asymmetrically porous and aligned fibrous tubular conduit with selective permeability as a biomimetic neural scaffold was manufactured using polycaprolactone (PCL), silk, and quercetin by a modified electrospinning method. The outer surface of the randomly oriented fibrous scaffold had microscale pores that could prevent fibrous tissue invasion (FTI), but could permeate neurotrophic factors, nutrients, and oxygen. The inner surface of the aligned fibrous scaffold can be favorable for neurite outgrowth, because of their superior neural cell attachment, migration, and directional growth. In vitro and in vivo studies have demonstrated the therapeutic effect of Quercetin, a ubiquitous flavonoid widely distributed in plants, on neuropathy, by modulating the expression of NRF-2-dependent antioxidant responsive elements. In this study, the controlled inner and outer surface geometry of the 0.5, 1.0, and 2.0 wt% quercetin-containing electrospun PCL/silk fibrous tubular scaffold fabricated via a modified wound coil collector and L-shaped ground design (WCC-LG) was characterized by FE-SEM, TEM, FFT, FT-IR, and XRD. In addition, two types of neural cell lines, PC12 and S42, were used to evaluate the cell proliferation rate of the different amount of quercetin-loaded PCL/silk tubular scaffolds.

Injectable Silk-Vaterite Composite Hydrogels with Tunable Sustained Drug Release Capacity

Improving the efficiency of chemotherapy remains a key challenge in drug delivery. Many drug carriers have been designed to achieve multifunctional factors as part of their performance, including controlled release, dispersibility in aqueous environments, and targeting to cancer sites. However, it is difficult to optimize multiple properties simultaneously for a single carrier system. Here, synergistic carriers composed of vaterite microspheres and silk nanofiber hydrogels were developed to improve the dispersibility of vaterite spheres and the control of drug delivery without compromising the injectability or sensitivity to pH. The vaterite microspheres were dispersed homogeneously and remained stable in the silk nanofiber hydrogels. Doxorubicin (DOX) was effectively loaded on the vaterite spheres and silk nanofibers, forming synergistic silk-vaterite hydrogel delivery systems. The sustained delivery of DOX was tuned and controlled by vaterite stability and the DOX content loaded on the spheres and nanofibers. The cytotoxicity was regulated via the controlled delivery of DOX, suggesting the possibility of optimizing chemotherapeutic strategies. These silk-vaterite delivery hydrogels suggest a useful strategy for designing novel delivery systems for improved delivery and therapeutic benefits.

Silk Fibroin as a Functional Biomaterial for Drug and Gene Delivery

Silk is a natural polymer with unique physicochemical and mechanical properties which makes it a desirable biomaterial for biomedical and pharmaceutical applications. Silk fibroin (SF) has been widely used for preparation of drug delivery systems due to its biocompatibility, controllable degradability and tunable drug release properties. SF-based drug delivery systems can encapsulate and stabilize various small molecule drugs as well as large biological drugs such as proteins and DNA to enhance their shelf lives and control the release to enhance their circulation time in the blood and thus the duration of action. Understanding the properties of SF and the potential ways of manipulating its structure to modify its physicochemical and mechanical properties allows for preparation of modulated drug delivery systems with desirable efficacies. This review will discuss the properties of SF material and summarize the recent advances of SF-based drug and gene delivery systems. Furthermore, conjugation of the SF to other biomolecules or polymers for tissue-specific drug delivery will also be discussed.

Biomineralization-inspired Crystallization of Manganese Oxide on Silk Fibroin Nanoparticles for in vivo MR/fluorescence Imaging-assisted Tri-modal Therapy of Cancer

Regenerated silk fibroin (SF) is a type of natural biomacromolecules with outstanding biocompatibility and biodegradability. However, stimulus-responsive SF-based nanocomplex has seldom been reported for application in tumor diagnosis and therapy. Methods: As a proof-of-concept study, a multifunctional SF@MnO2 nanoparticle-based platform was strategically synthesized using SF as a reductant and a template via a biomineralization-inspired crystallization process in an extremely facile way. Because of their mesoporous structure and abundant amino and carboxyl terminal residues, SF@MnO2 nanoparticles were co-loaded with a photodynamic agent indocyanine green (ICG) and a chemotherapeutic drug doxorubicin (DOX) to form a SF@MnO2/ICG/DOX (SMID) nanocomplex. Results: The obtained product was highly reactive with endogenous hydrogen peroxide (H2O2) in tumor microenvironment, which was decomposed into O2 to enhance tumor-specific photodynamic therapy (PDT). Moreover, SMID nanocomplex produced a strong and stable photothermal effect upon near-infrared (NIR) irradiation for photothermal therapy (PTT) owing to the distinct photothermal response of SF@MnO2 and stably conjugated ICG. The concurrent NIR fluorescence and magnetic resonance (MR) imaging in vivo both indicated effective tumor-specific enrichment of SMID nanoparticles via enhanced permeability and retention (EPR) effect. Animal studies further verified that SMID nanoparticles remarkably improved tumor inhibitive efficacy through combination PTT/PDT/chemotherapy with minimal systemic toxicity or adverse effect. Conclusion: This study demonstrated the promising potential of SF-based nanomaterial to address some of the key challenges in cancer therapy due to unfavorable tumor microenvironment for drug delivery.

A Review for the Synthesis of Silk Fibroin Nanoparticles with Different Techniques and Their Ability to be Used for Drug Delivery

Background:

Silk fibroin is the main protein of silk, and it has recently been evaluated for drug delivery applications due to its excellent properties. Specifically, silk fibroin exhibits good biocompatibility, biodegradability and low immunogenicity. Fibroin nanoparticles have attracted attention due to their high binding ability to different drugs as well as their ability for controlled drug release. The improvement of the therapeutic efficiency of drug encapsulation is important and depends on the particle size, the chemical structure and the properties of the silk fibroin nanoparticles.

Methods:

There is a variety of methods for the preparation of fibroin nanoparticles such as (i) electrospraying and desolvation method, (ii) supercritical fluid technologies, (iii) capillary-microdot technique, (iv) salting out etc. Furthermore, various techniques have been used for the characterization of nanoparticles such as SEM (scanning electron microscopy), TEM (transmission electron microscopy), DLS (dynamic light scattering), Zeta-potential and FTIR (Fourier transform infrared spectroscopy). Different drugs (paclitaxel, curcumin, 5-fluorouracil etc) have been encapsulated in fibroin nanoparticles.

Results:

Each separated synthesis method has different advantages such as (i) high yield, (ii) avoid use of toxic solvents, (iii) low cost, (iv) controllable particle size, (v) no organic solvent residue, (vi) simplicity of operation, (vii) small particles size, (viii) homeliness of operation, (ix) restrainable particle size, (x) easy and safe to operate, (xi) no use of organic solvent. Moreover, some major drugs studied are Floxuridine, Fluorouracil, Curcumin, Doxorubicin, Metotrexate, Paclitaxel and Doxorubicin, Horseradish peroxidase. All the above combinations (preparation method-drug) are studied in detail.

Conclusion:

Various drugs have been encapsulated successfully in silk fibroin and all of them exhibit a significant release rate. Finally, the encapsulation efficiency and release rate depend on the molecular weight of the drugs and it can be adjusted by controlling the crystallinity and concentration of silk fibroin.

Optically Active Hybrid Materials Based on Natural Spider Silk

Spider silk is a natural material possessing unique properties such as biocompatibility, regenerative and antimicrobial activity, and biodegradability. It is broadly considered an attractive matrix for tissue regeneration applications. Optical monitoring and potential control over tissue regrowth are attractive tools for monitoring of this process. In this work, we show upconversion modification of natural spider silk fibers with inorganic nanoparticles. To achieve upconversion, metal oxide nanoparticles were doped with low concentrations of rare-earth elements, producing potentially biocompatible luminescent nanomaterials. The suggested approach to spider silk modification is efficient and easy to perform, opening up sensing and imaging possibilities of biomaterials in a noninvasive and real-time manner in bio-integration approaches.

Extended release formulations using silk proteins for controlled delivery of therapeutics

INTRODUCTION

Silk is a promising biomaterial for controlled delivery of therapeutics and has a unique protein chemistry that can be tuned to form different carrier formats. The protein has been studied for sustained release depot systems for the targeted or localized delivery of drugs.

AREAS COVERED

An overview of natural silk proteins for controlled delivery of therapeutics is provided, with a focus on the features of silk proteins that allow them to be useful tools for controlled delivery. Recent applications of natural silk proteins as controlled delivery systems are also summarized.

EXPERT OPINION

The versatility of silk proteins makes them desirable biomaterials for a broad range of applications for controlled delivery of both small and large molecules. Further, the degradation profile leading to peptides and amino acids provides compatibility with pH-sensitive therapeutics. While silk sericin and spider silks are under study, silk fibroin extracted from silkworms (e.g. Bombyx mori) dominates pharmaceutical studies with silk. Silk fibroin can be formed into drug delivery tools for systemic or local injections, topical and transdermal applications, and implantation; depending on the target disease and therapeutic molecule. In vitro to in vivo correlations and scale-up needs are the next steps towards clinical applications.

Paclitaxel-Loaded Silk Fibroin Nanoparticles: Method Validation by UHPLC-MS/MS to Assess an Exogenous Approach to Load Cytotoxic Drugs

The aim of this work was to load an anticancer drug, paclitaxel (PTX), on Silk Fibroin Nanoparticles (SFNs) by using an exogenous approach. SFNs were produced, freeze-dried and then loaded with PTX. An exogenous method allowed us to reduce both drug loss and environmental impact. In order to quantify PTX loaded in SFNs, a simple and reliable method using reversed phase liquid chromatography coupled to tandem mass spectrometry (rp-UHPLC-MS/MS) was developed. This methodology was validated by the determination of spiked QC samples in three consecutive days. Good accuracy and precision of the method were obtained, while the intra-day and inter-day precisions were less than 10.3%. For PTX, the limit of quantitation (LOQ) was 5.0 ng/mL. Recovery from the matrix (SFNs-PTX pellets) was calculated (81.2% at LOQ value) as PTX was entrapped in a new matrix like the polymer silk fibroin-based. This method was successfully applied to determine the encapsulation efficiency (1.00 ± 0.19%) and the nanoparticle loading (0.12 ± 0.02% w/w). The in vitro anticancer activity of SFNs-PTX was tested against CFPAC-1 cancer cells; results demonstrated a very high cytotoxic activity of SFNs-PTX, with a dose dependent inhibition of CFPAC-1 proliferation, confirmed by the IC50 value of 3450 ± 750 ng/mL.

Targeted Delivery to Tumors: Multidirectional Strategies to Improve Treatment Efficiency

Malignant tumors are characterized by structural and molecular peculiarities providing a possibility to directionally deliver antitumor drugs with minimal impact on healthy tissues and reduced side effects. Newly formed blood vessels in malignant lesions exhibit chaotic growth, disordered structure, irregular shape and diameter, protrusions, and blind ends, resulting in immature vasculature; the newly formed lymphatic vessels also have aberrant structure. Structural features of the tumor vasculature determine relatively easy penetration of large molecules as well as nanometer-sized particles through a blood⁻tissue barrier and their accumulation in a tumor tissue. Also, malignant cells have altered molecular profile due to significant changes in tumor cell metabolism at every level from the genome to metabolome. Recently, the tumor interaction with cells of immune system becomes the focus of particular attention, that among others findings resulted in extensive study of cells with preferential tropism to tumor. In this review we summarize the information on the diversity of currently existing approaches to targeted drug delivery to tumor, including (i) passive targeting based on the specific features of tumor vasculature, (ii) active targeting which implies a specific binding of the antitumor agent with its molecular target, and (iii) cell-mediated tumor targeting.

Silk nanoparticles: from inert supports to bioactive natural carriers for drug delivery

Silk proteins have been studied and employed for the production of drug delivery (nano)systems. They show excellent biocompatibility, controllable biodegradability and non-immunogenicity and, if needed, their properties can be modulated by blending with other polymers. Silk fibroin (SF), which forms the inner core of silk, is a (bio)material officially recognized by the Food and Drug Administration for human applications. Conversely, the potential of silk sericin (SS), which forms the external shell of silk, could still be considered under evaluation. At the best of our knowledge, nanoparticles based on silk sericin "alone" cannot be produced, due to its physicochemical instability influenced by extreme pH, high water solubility and temperature; for these reasons, it almost always needs to be combined with other polymers for the development of drug delivery systems. In this review, we focused on silk proteins as bioactive natural carriers, since they show not only optimal features as inert excipients, but also remarkable intrinsic biological activities. SF has anti-inflammatory properties, while SS presents antioxidant, anti-tyrosine, anti-aging, anti-elastase and anti-bacterial features. Here, we give an overview on SF or SS silk-based nanosystems, with particular attention on the production techniques.

Chitosan-coated doxorubicin nano-particles drug delivery system inhibits cell growth of liver cancer via p53/PRC1 pathway

BACKGROUND

Nano-particles have been widely used in target-specific drug delivery system and showed advantages in cancers treatment. This study aims to evaluate the effect of chitosan coated doxorubicin nano-particles drug delivery system in liver cancer.

METHODS

The chitosan nano-particles were prepared by using the ionic gelation method. The characterizations of the nano-particles were determined by transmission electron microscopy. The cytotoxicity was detected by MTT assay, and the endocytosis, cell apoptosis and cell cycle were examined by flow cytometry. The protein level was analyzed with western blot. The dual luciferase reporter assay was performed to assess the interaction between p53 and the promoter of PRC1, and chromatin immune-precipitation was used to verify the binding between them.

RESULTS

The FA-CS-DOX nano-particles were irregular and spherical particles around 30-40 nm, with uniform size and no adhesion. No significant difference was noted in doxorubicin release rate between CS-DOX and FA-CS-DOX. FA-CS-DOX nano-particles showed stronger cytotoxicity than CS-DOX. FA-CS-DOX nano-particles promoted the apoptosis and arrested cell cycle at G2/M phase, and they up-regulated p53. FA-CS-DOX nano-particles inhibited cell survival through p53/PRC1 pathway.

CONCLUSION

Chitosan-coated doxorubicin nano-particles drug delivery system inhibits cell growth of liver cancer by promoting apoptosis and arresting cell cycle at G2/M phase through p53/PRC1 pathway.