Efficient temperature sensing platform based on fluorescent block copolymer-functionalized graphene oxide

Nanoelectromechanical Temperature Sensor Based on Piezoresistive Properties of Suspended Graphene Film

The substrate impurities scattering will lead to unstable temperature-sensitive behavior and poor linearity in graphene temperature sensors. And this can be weakened by suspending the graphene structure. Herein, we report a graphene temperature sensing structure, with suspended graphene membranes fabricated on the cavity and non-cavity SiO₂/Si substrate, using monolayer, few-layer, and multilayer graphene. The results show that the sensor provides direct electrical readout from temperature to resistance transduction by the nano piezoresistive effect in graphene. And the cavity structure can weaken the substrate impurity scattering and thermal resistance effect, which results in better sensitivity and wide-range temperature sensing. In addition, monolayer graphene is almost no temperature sensitivity. And the few-layer graphene temperature sensitivity, lower than that of the multilayer graphene cavity structure (3.50%/°C), is 1.07%/°C. This work demonstrates that piezoresistive in suspended graphene membranes can effectively enhance the sensitivity and widen the temperature sensor range in NEMS temperature sensors.

Acid-base responsive photoluminescence switching of CdSe/ZnS quantum dots coupled to plasmonic gold film using nanometer-thick poly[(2-diethylamino)ethyl methacrylate] layer

The control of plasmon-nanoemitter interactions at the nanoscale enables the tailored modulation of optical properties, namely, the photoluminescence (PL) intensity of the nanoemitters. In this contribution, using a nanometer-thick poly[(2-diethylamino) ethyl methacrylate] (39 to 74 nm) as pH responsive spacer layer (pK_a ∼ 6 to 6.5) between a plasmonic gold film and CdSe/ZnS Quantum Dots (QDs) nanoemitters, we could achieve reversible pH-responsive PL switching in QDs. In fact, the swelling (at pH 5) and shrinking (at pH 11) function of the pH-responsive spacer layer modulates the distance between the QDs and the gold surface, which dictates the plasmonic film-QDs nanoemitter interaction. Notably, we observed a high QDs' PL enhancement of up to a factor of 3.1 ± 0.4 through changing the pH value from 5 to 11. Furthermore, based on a systematic analysis of several samples with different spacer layer thicknesses and multiple pH cycles, our developed system revealed substantial stability, reversibility and PL enhancement reproducibility. Thus, the established acid-base responsive switchable systems may represent an appealing platform for applications such as sensors, biochemical assays, optoelectronics and logic gates and can be easily evolved to other multifunctional switchable systems using alternative stimuli-responsive polymers.

A Facile Fabrication of CdSe/ZnS QDs-Block Copolymer Brushes-Modified Graphene Oxide Nanohybrid with Temperature-Responsive Behavior

In this paper, we described a straightforward one-step chemical method for the synthesis of semiconductor quantum dots(QDs)-block copolymer brushes functionalized graphene oxide(GO) fluorescence nanohybrids. The azobenzene-terminated block copolymer poly(N-isopropylacrylamid)-b-poly(styrene-co-5-(2-methacryoylethyloxymethyl)-8-quinolinol)(PNIPAM-b-P(St-co-MQ)) was modified on the surface of GO sheets via host-guest interactions between β-cyclodextrin-modified GO and azobenzene moieties, and simultaneously CdSe/ZnS QDs were integrated on the block copolymer brushes through the coordination between 8-hydroxyquinoline units in the polymer brushes and CdSe/ZnS QDs. The resulting fluorescence nanohybrid exhibited dual photoluminescence at 620 nm and 526 nm, respectively, upon excitation at 380 nm and LCST-type thermo-responsive behavior which originated from the change in the PNIPAM conformation in the block copolymer brushes of GO sheets.

Preliminary In Vitro Cytotoxicity, Mutagenicity and Antitumoral Activity Evaluation of Graphene Flake and Aqueous Graphene Paste

This study aimed to determine the in vitro cytotoxicity and mutagenicity of graphene flake (GF) and aqueous graphene paste (AGP) in order to evaluate their potential for application as biomaterials. Furthermore, their antitumor activity against adherent and suspended cells, namely, human breast adenocarcinoma cells (MDA-MB-231), and human monocytes from histiocytic lymphoma (U-937), was investigated. The results demonstrated that GF reduced the viability and proliferation of NIH3T3 immortalized murine fibroblasts for concentrations >0.8 µg/mL and incubation times of 48 and 72 h. AGP showed no toxic effects in any of the tested concentrations and incubation times. The same results were obtained for MDA-MB-231 cells. The viability of the U-937 cells was not affected by either GF or AGP. The Ames test showed that GF and AGP were not genotoxic against Salmonella typhimurium strains TA98 and TA100, with and without metabolic activation. The present study demonstrated good in vitro cellular compatibility of GF and AGP and. Among these, AGP was the best material as it did not interfere, at any of the tested concentrations, with cell viability and proliferation for up to 72 h of incubation. In any case, neither material induced alterations to cell morphology and were not mutagenic.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Fluorescent Polymer-MoS2-Embedded Microgels for Photothermal Heating and Colorimetric Monitoring

Photothermal heating with accurate monitoring of local temperature in complex biological fluids is crucial for therapeutic accuracy. Herein, photothermal microgels are developed to heat microscopic volumes through photothermal conversion and report the local temperature with a colorimetric response. The microgels consist of poly(ethylene glycol)-based hydrogels, which integrate temperature-responsive block-copolymer-grafted MoS₂ nanosheets (BCP-grafted MoS₂ NSs). The MoS₂ NSs are used as a fluorescence quencher as well as an efficient photothermal agent, with their surface decorated with three distinct temperature-responsive BCPs containing blue-, green-, and red-fluorescent dyes. Upon irradiation of near-infrared light, MoS₂ NSs convert the radiation into heat, and the BCPs change their conformation depending on the local temperature, selectively activating Förster resonance energy transfer of the three dyes. The use of three distinct BCPs and dyes enables the measurement of temperature in a wide range (i.e., from 25 to 50 °C). Importantly, the hydrogel matrix excludes molecules larger than the limiting mesh size so that BCP-grafted MoS₂ NSs remain free from contamination against large adhesive proteins such as albumin, thus maintaining their sensitivity even in complex fluids.

Preparation and Properties of Polyvinylidene Fluoride Nanocomposited Membranes based on Poly(N-Isopropylacrylamide) Modified Graphene Oxide Nanosheets

The nanomaterial of graphene oxide grafting poly (N-isopropylacrylamide) (GO-g-PNIPAAm) was synthesized and PVDF/GO-g-PNIPAAm blended membranes were fabricated by wet phase inversion. In this work, a hydrophilic nanomaterial GO-g-PNIPAAm with poly(N-isopropylacrylamide) (PNIPAAm) grafted on GO, was synthesized by the atom transfer radical polymerization (ATRP) method. The resulting nanomaterial was confirmed by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectrum, and X-ray photoelectron spectroscopy (XPS) analysis. The synthesized GO-g-PNIPAAm was incorporated with polyvinylidene fluoride (PVDF) via phase inversion, and investigated for its temperature sensitivity, porosity, contact angle, scanning electron microscopy, and permeate properties. The water contact angle measurements confirmed that GO-g-PNIPAAm nanomaterial-endowed PVDF membranes with better hydrophilicity and thermo-responsive properties compared with those of the pristine PVDF membranes. Bovine serum albumin (BSA) adsorption experiments suggested that excellent antifouling properties of membranes were acquired after adding GO-g-PNIPAAm. The modified membranes showed good performance when the doping amount of GO-g-PNIPAAm was 0.2 wt %.

Microcapsules Containing pH-Responsive, Fluorescent Polymer-Integrated MoS2: An Effective Platform for in Situ pH Sensing and Photothermal Heating

We report the design of a novel microcapsule platform for in situ pH sensing and photothermal heating, which involves the encapsulation of pH-responsive polymer-coated molybdenum disulfide (MoS₂) nanosheets (NSs) in microcapsules with an aqueous core and a semipermeable polymeric shell. The MoS₂ NSs were functionalized with pH-responsive polymers having fluorescent groups at the distal end to provide pH-sensitive Förster resonance energy transfer (FRET) effect. The pH-responsive polymers were carefully designed to produce a dramatic change in the polymer conformation, which translated to a change in the FRET efficiency near pH 7.0 in response to subtle pH changes, enabling the detection of cancer cells. The pH-sensitive MoS₂ NSs were microfluidically encapsulated within semipermeable membranes to yield microcapsules with a uniform size and composition. The microcapsules retained the MoS₂ NSs without leakage while allowing the diffusion of small ions and water through the membrane. At the same time, the membranes excluded adhesive proteins and lipids in the surrounding media, protecting the encapsulated MoS₂ NSs from deactivation and enabling in situ pH monitoring. Moreover, the encapsulated MoS₂ NSs showed high-performance photothermal heating, rendering the dual-functional microcapsules highly suitable for cancer diagnosis and treatment.

Thermoresponsive Arrays Patterned via Photoclick Chemistry: Smart MALDI Plate for Protein Digest Enrichment, Desalting, and Direct MS Analysis

Sample desalting and concentration are crucial steps before matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) analysis. Current sample pretreatment approaches require tedious fabrication and operation procedures, which are unamenable to high-throughput analysis and also result in sample loss. Here, we report the development of a smart MALDI substrate for on-plate desalting, enrichment, and direct MS analysis of protein digests based on thermoresponsive, hydrophilic/hydrophobic transition of surface-grafted poly(N-isopropylacrylamide) (PNIPAM) microarrays. Superhydrophilic 1-thioglycerol microwells are first constructed on alkyne-silane-functionalized rough indium tin oxide substrates based on two sequential thiol-yne photoclick reactions, whereas the surrounding regions are modified with hydrophobic 1H,1H,2H,2H-perfluorodecanethiol. Surface-initiated atom-transfer radical polymerization is then triggered in microwells to form PNIPAM arrays, which facilitate sample loading and enrichment of protein digests by concentrating large-volume samples into small dots and achieving on-plate desalting through PNIPAM configuration change at elevated temperature. The smart MALDI plate shows high performance for mass spectrometric analysis of cytochrome c and neurotensin in the presence of 1 M urea and 100 mM NaHCO₃, as well as improved detection sensitivity and high sequence coverage for α-casein and cytochrome c digests in femtomole range. The work presents a versatile sample pretreatment platform with great potential for proteomic research.

Preparation of a temperature-responsive block copolymer-anchored graphene oxide@ZnS NPs luminescent nanocomposite for selective detection of 2,4,6-trinitrotoluene

Thermo-sensitive block copolymer decorated GO@ZnS NPs nanocomposite was constructed via π–π stacking interaction as a robust fluorescent sensing platform for the selective detection of TNT.

Deciphering the Effect of Polymer-Assisted Doping on the Optoelectronic Properties of Block Copolymer-Anchored Graphene Oxide

Doping facilitates the tuning of band gap, providing an opportunity to tailor the optoelectronic properties of graphene in a simple way, and polymer-assisted doping is a new route to combine the optoelectronic properties of graphene with the properties of a polymer. In this endeavor, a linear diblock copolymer, polycaprolactone-block-poly(dimethyl aminoethyl methacrylate) (PCL₁₃-b-PDMAEMA₁₁₇) (GPCLD) is grafted from the graphene oxide (GO) surface via consecutive ring opening and atom transfer radical polymerization. GPCLD is characterized using proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy, atomic force microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, and Raman spectroscopy. The phase transition behavior of the GPCLD solution with varying temperature and pH is monitored using fluorescence spectroscopy and dynamic light scattering. Temperature-dependent ¹H NMR spectra at pH 9.2 indicate the influence of temperature on the interaction between GPCLD and solvent (water) molecules causing the phase separation. Fluorescence spectra at pH 4 and 9.2 give the evidence of localized p- and n-type doping of graphene assisted by the pendent PDMAEMA chains. In the impedance spectra of GPCLD films, the Nyquist plots vary with pH; at pH 4, they exhibit a semicircle at higher frequencies and a spike at lower frequencies; at pH 7.0, the spike is replaced by an arc; and at pH 9.2, the semicircle at higher frequencies vanishes and only a spike is noticed, all of these suggesting different types of doping of graphene at different pH values. The dc-conductivity also varies with pH and temperature because of the different types of doping. The current (I)-voltage (V) property of GPCLD at different pH values is very unique: at pH 9.2, an interesting feature of negative differential resistance (NDR) is observed; at pH 7, the rectification property is observed; and at pH 4, again the NDR property is observed. The temperature-dependent I-V property at pH 7 and 9.2 clearly indicates a signature of doping, dedoping, and redoping because of the change in the interaction of GO with the grafted polymer arising from coiling and decoiling of polymer chains.

Impact of size control of graphene oxide nanosheets for enhancing electrical and mechanical properties of carbon nanotube–polymer composites

The size effects of GOs on the dispersion behavior of multi-walled carbon nanotubes (MWCNTs) were evaluated, and the GOs were exploited to develop conducting film and polymer-CNT composites with excellent electrical and mechanical properties.

A facile construction of Au nanoparticles on a copolymer ligand brushes modified graphene oxide nanoplatform with excellent catalytic properties

Au NPs were generated via in situ reduction on copolymer brush P(OEGMA-co-MQ) functionalized GO. MQ units in the brushes as capping agents could stabilize the Au NPs. The Au NPs–GO hybrid exhibited high catalytic activity for the reduction of 4-NP.

ATP-responsive DNA-graphene hybrid nanoaggregates for anticancer drug delivery

Stimuli-triggered drug delivery systems are primarily focused on the applications of the tumor microenvironmental or cellular physiological cues to enhance the release of drugs at the target site. In this study, we applied adenosine-5'-triphosphate (ATP), the primary "energy molecule", as a trigger for enhanced release of preloaded drugs responding to the intracellular ATP concentration that is significantly higher than the extracellular level. A new ATP-responsive anticancer drug delivery strategy utilizing DNA-graphene crosslinked hybrid nanoaggregates as carriers was developed for controlled release of doxorubicin (DOX), which consists of graphene oxide (GO), two single-stranded DNA (ssDNA, denoted as DNA1 and DNA2) and ATP aptamer. The single-stranded DNA1 and DNA2 together with the ATP aptamer serve as the linkers upon hybridization for controlled assembly of the DNA-GO nanoaggregates, which effectively inhibited the release of DOX from the GO nanosheets. In the presence of ATP, the responsive formation of the ATP/ATP aptamer complex causes the dissociation of the aggregates, which promoted the release of DOX in the environment with a high ATP concentration such as cytosol compared with that in the ATP-deficient extracellular fluid. This supports the development of a novel ATP-responsive platform for targeted on-demand delivery of anticancer drugs inside specific cells.

Facile fabrication of a near-infrared responsive nanocarrier for spatiotemporally controlled chemo-photothermal synergistic cancer therapy

Remote-controlled nanocarriers for drug delivery are of great promise to provide timely, sensitive and spatiotemporally selective treatments for cancer therapy. Due to convenient and precise manipulation, deep penetration through tissues and excellent biocompatibility, near-infrared (NIR) irradiation is a preferred external stimulus for triggering the release of loaded drugs. In this work, for spatiotemporally controlled chemo-photothermal synergistic cancer therapy, a NIR responsive nanocarrier was fabricated using reduced graphene oxide nanosheets (rNGO) decorated with mesoporous silica shell and the subsequent functionalization of the thermoresponsive polymer brushes (pNIPAM-co-pAAm) at the outlet of the silica pore channels. rNGO, which combined with the mesoporous silica shell provide a high loading capacity for anticancer drugs (doxorubicin, DOX), was assigned to sense NIR irradiation for the manipulation of pNIPAM-co-pAAm valve to control the diffusion of loaded DOX. Under NIR irradiation, rNGO would generate heat, which could not only elevate the surrounding temperature over the low critical solution temperature (LCST) of pNIPAM-co-pAAm to open the thermoresponsive polymer valve and promote the diffusion of DOX, but also kill the cancer cells through the hypothermia effect. By manipulating NIR irradiation, the nanocarrier exhibited efficiently controlled release of loaded DOX both in the buffer and in living HeLa cells (the model cancer cells), providing powerful and site-targeted treatments, which can be attributed to synergistic effects of chemo-photothermal therapy. To sum up, this novel nanocarrier is an excellent drug delivery platform in remote-controlled chemo-photothermal synergistic cancer therapy via NIR irradiation.

Environmentally responsive graphene systems

Graphene materials have been attracting significant research interest in the past few years, with the recent focuses on graphene-based electronic devices and smart stimulus-responsive systems that have a certain degree of automatism. Owing to its huge specific surface area, large room-temperature electron mobility, excellent mechanical flexibility, exceptionally high thermal conductivity and environmental stability, graphene is identified as a beneficial additive or an effective responding component by itself to improve the conductivity, flexibility, mechanical strength and/or the overall responsive performance of smart systems. In this review article, we aim to present the recent advances in graphene systems that are of spontaneous responses to external stimulations, such as environmental variation in pH, temperature, electric current, light, moisture and even gas ambient. These smart stimulus-responsive graphene systems are believed to have great theoretical and practical interests to a wide range of device applications including actuators, switches, robots, sensors, drug/gene deliveries, etc.

Efficient colorimetric pH sensor based on responsive polymer-quantum dot integrated graphene oxide

In this paper, we report the development of a versatile platform for a highly efficient and stable graphene oxide (GO)-based optical sensor that exhibits distinctive ratiometric color responses. To demonstrate the applicability of the platform, we fabricated a colorimetric, GO-based pH sensor that responds to a wide range of pH changes. Our sensing system is based on responsive polymer and quantum dot (QD) hybrids integrated on a single GO sheet (MQD-GO), with the GO providing an excellent signal-to-noise ratio and high dispersion stability in water. The photoluminescence emissions of the blue and orange color-emitting QDs (BQDs and OQDs) in MQD-GO can be controlled independently by different pH-responsive linkers of poly(acrylic acid) (PAA) (pKa=4.5) and poly(2-vinylpyridine) (P2VP) (pKa=3.0) that can tune the efficiencies of Förster resonance energy transfer from the BQDs to the GO and from the OQDs to the GO, respectively. As a result, the color of MQD-GO changes from orange to near-white to blue over a wide range of pH values. The detailed mechanism of the pH-dependent response of the MQD-GO sensor was elucidated by measurements of time-resolved fluorescence and dynamic light scattering. Furthermore, the MQD-GO sensor showed excellent reversibility and high dispersion stability in pure water, indicating that our system is an ideal platform for biological and environmental applications. Our colorimetric GO-based optical sensor can be expanded easily to various other multifunctional, GO-based sensors by using alternate stimuli-responsive polymers.

Biocompatible and flexible graphene oxide/upconversion nanoparticle hybrid film for optical pH sensing

Free-standing optical hybrid film which is composed of positively-charged polyethylenimine-coated NaYF4:Yb,Er nanoparticles and negatively-charged graphene oxide (GO) has been developed to measure pH based on the pH-dependent luminescence quenching effect caused by GO. The isothermal titration calorimetry analyses indicate that the interaction between GO and NaYF4:Yb,Er nanoparticles becomes stronger with increasing pH, leading to a more significant fluorescence quenching of NaYF4:Yb,Er nanoparticles at high pH values. The excellent mechanical properties of the hybrid film endow the thin-film pH sensor with better repeatability and higher stability during the measurements. Quantitatively, the upconversion luminescence intensity of the hybrid film exhibits a linear trend over the pH range of 5.00-8.00. Because of excitation with a 980 nm laser, as expected, the hybrid film sensor is also sensitive to the urine measurements with reduced background absorption. In addition to its good biocompatibility, our free-standing hybrid film sensor would be a promising candidate for biological, medical, and pharmaceutical applications.