Recent advances in surface chemistry strategies for the fabrication of functional iron oxide based magnetic nanoparticles

Biocatalyst immobilization on magnetic nano-architectures for potential applications in condensation reactions

In this review article, a perspective on the immobilization of various hydrolytic enzymes onto magnetic nanoparticles for synthetic organic chemistry applications is presented. After a first part giving short overview on nanomagnetism and highlighting advantages and disadvantages of immobilizing enzymes on magnetic nanoparticles (MNPs), the most important hydrolytic enzymes and their applications were summarized. A section reviewing the immobilization techniques with a particular focus on supporting enzymes on MNPs introduces the reader to the final chapter describing synthetic organic chemistry applications of small molecules (flavour esters) and polymers (polyesters and polyamides). Finally, the conclusion and perspective section gives the author's personal view on further research discussing the new idea of a synergistic rational design of the magnetic and biocatalytic component to produce novel magnetic nano-architectures.

Putting Hybrid Nanomaterials to Work for Biomedical Applications

Hybrid nanomaterials have found use in many biomedical applications. This article provides a comprehensive review of the principles, techniques, and recent advancements in the design and fabrication of hybrid nanomaterials for biomedicine. We begin with an introduction to the general concept of material hybridization, followed by a discussion of how this approach leads to materials with additional functionality and enhanced performance. We then highlight hybrid nanomaterials in the forms of nanostructures, nanocomposites, metal-organic frameworks, and biohybrids, including their fabrication methods. We also showcase the use of hybrid nanomaterials to advance biomedical engineering in the context of nanomedicine, regenerative medicine, diagnostics, theranostics, and biomanufacturing. Finally, we offer perspectives on challenges and opportunities.

Protein encapsulation of nanocatalysts: A feasible approach to facilitate catalytic theranostics

Enzyme-mimicking nanocatalysts, also termed nanozymes, have attracted much attention in recent years. They are considered potential alternatives to natural enzymes due to their multiple catalytic activities and high stability. However, concerns regarding the colloidal stability, catalytic specificity, efficiency and biosafety of nanomaterials in biomedical applications still need to be addressed. Proteins are biodegradable macromolecules that exhibit superior biocompatibility and inherent bioactivities; hence, the protein modification of nanocatalysts is expected to improve their bioavailability to match clinical needs. The diversity of amino acid residues in proteins provides abundant functional groups for the conjugation or encapsulation of nanocatalysts. Moreover, protein encapsulation can not only improve the overall performance of nanocatalysts in biological systems, but also bestow materials with new features, such as targeting and retention in pathological sites. This review aims to report the recent developments and perspectives of protein-encapsulated catalysts in their functional improvements, modification methods and applications in biomedicine.

Dihydrocaffeic Acid-Decorated Iron Oxide Nanomaterials Effectively Inhibit Human Calcitonin Aggregation

To date, more than 30 human peptides or proteins have been found to form amyloid fibrils, most of which are associated with human diseases. However, currently, no cure for amyloidosis exists. Therefore, development of therapeutic strategies to inhibit amyloid formation is urgently required. Although the role of some amyloidogenic proteins has not been identified in certain diseases, their self-assembling behavior largely affects their bioactivity. Human calcitonin (hCT) is a hormone peptide containing 32 amino acids and is secreted by the parafollicular cells of the thyroid gland in the human body. It can regulate the concentration of calcium ions in the blood and block the activity of osteoclasts. Therefore, calcitonin has also been considered a therapeutic peptide. However, the aggregation of hCT hinders this process, and hCT has been replaced by salmon calcitonin in drug formulations. Recently, iron oxide nanomaterials have been developed as potential materials for various applications owing to their high biocompatibility, low toxicity, and ease of functionalization. In this study, nanoparticles (NPs) were prepared using a simple chemical coprecipitation method. We first demonstrated that dopamine-conjugated Fe₃O₄ inhibited hCT aggregation, similar to what we found when carbon dots were used as core materials in the previous study. Later, we continued to simplify the preparation process, that is, the mixing of dihydrocaffeic acid (DCA) and iron oxide NPs, to maintain their stability and inhibitory effect against hCT aggregation. Furthermore, DCA-decorated Fe₃O₄ can dissociate preformed hCT amyloid fibrils. This appears to be one of the most promising ways to stabilize hCT in solution and may be helpful for amyloidosis treatment.

Folic acid-decorated PEGylated magnetite nanoparticles as efficient drug carriers to tumor cells overexpressing folic acid receptor

The improved drug delivery systems (DDS) are needed for the targeted delivery of their therapeutic cargo (biologically active protein/peptide molecules, nucleic acids, vaccines, etc.) to diseased cells. Thus, we aimed to develop magnetite nanoparticles (Fe₃O₄), stabilized with polyethylene glycol (PEG) and decorated (surface-functionalized) with folic acid (FA) (Fe₃O₄@PEG@FA) to ensure targeted internalization in cells expressing the folic acid receptors (FR). The Fe₃O₄@PEG@FA nanoparticles were synthesized by co-precipitation in a one-pot methodology. Curcumin (Curc), a polyphenol with anti-tumoral activity, was loaded on the nanoparticles, and FA-targeted (Fe₃O₄@PEG@FA@Curc) and non-targeted (Fe₃O₄@PEG@Curc) systems were obtained. The internalization of Fe₃O₄@PEG@FA@Curc and Fe₃O₄@PEG@Curc nanoparticles was determined in two tumor cell lines, the FR-positive MCF-7 human breast carcinoma cell line and A549 human lung adenocarcinoma cell line, expressing a low level of FR. The results showed that MCF-7 cells internalize FA-functionalized nanoparticles to a greater extent than non-targeted ones and also than A549 cells. The competitive studies performed in the presence of FA in excess suggested that internalization is an FR-dependent process. The increased internalization of Fe₃O₄@PEG@FA@Curc nanoparticles in MCF-7 cells is correlated with increased cytotoxicity in this cell line compared to A549 cells. In conclusion, the FA-functionalized magnetic systems can ensure a better internalization of the nanoparticles and can be used to deliver various therapeutic agents, both in cancer treatment and also in the treatment of other inflammation-associated diseases such as rheumatoid arthritis, systemic lupus erythematosus, osteoarthritis, Crohn's disease or atherosclerosis.

Ultrasmall Superparamagnetic Iron Oxide Nanoparticles as Nanocarriers for Magnetic Resonance Imaging: Development and In Vivo Characterization

Ultrasmall superparamagnetic iron oxide nanoparticles (uSPIOs) are attractive platforms for the development of smart contrast agents for magnetic resonance imaging (MRI). Oleic acid-capped uSPIOs are commercially available yet hydrophobic, hindering in vivo applications. A hydrophilic ligand with high affinity toward uSPIO surfaces can render uSPIOs water-soluble, biocompatible, and highly stable under physiological conditions. A small overall hydrodynamic diameter ensures optimal pharmacokinetics, tumor delivery profiles, and, of particular interest, enhanced T ₁ MR contrasts. In this study, for the first time, we synthesized a ligand that not only fulfills the as-proposed properties but also provides multiple reactive groups for further modifications. The synthesis delivers a facile approach using commercially available reactants, with resultant uSPIO-ligand constructs assembled through a single-step ligand exchange process. Structural and molecular size analyses confirmed size uniformity and small hydrodynamic diameter of the constructs. On average, 43 reactive amine groups were present per uSPIO nanoparticle. Its r ₁ relaxivity has been tested on a 7 Tesla MR instrument and is comparable to that of the clinically available T ₁ gadolinium-based contrast agent GBCA (1 vs 3 mM^-1 s^-1, respectively). A significant decrease in tumor T1 (15%) within 1 h of injection and complete signal recovery after 2 h were detected with a dose of 7 μg Fe/g mouse. The agent also has high r ₂ relaxivity and can be used for T ₂ contrast-enhanced MRI. Taken together, good relaxation and delivery properties and the presence of multiple surface reactive groups can facilitate its application as a universal MRI-compatible nanocarrier platform.

A Milestone in the Chemical Synthesis of Fe3O4 Nanoparticles: Unreported Bulklike Properties Lead to a Remarkable Magnetic Hyperthermia

Among iron oxide phases, magnetite (Fe₃O₄) is often the preferred one for nanotechnological and biomedical applications because of its high saturation magnetization and low toxicity. Although there are several synthetic routes that attempt to reach magnetite nanoparticles (NPs), they are usually referred as "IONPs" (iron oxide NPs) due to the great difficulty in obtaining the monophasic and stoichiometric Fe₃O₄ phase. Added to this problem is the common increase of size/shape polydispersity when larger NPs (D > 20 nm) are synthesized. An unequivocal correlation between a nanomaterial and its properties can only be achieved by the production of highly homogeneous systems, which, in turn, is only possible by the continuous improvement of synthesis methods. There is no doubt that solving the compositional heterogeneity of IONPs while keeping them monodisperse remains a challenge for synthetic chemistry. Herein, we present a methodical optimization of the iron oleate decomposition method to obtain Fe₃O₄ single nanocrystals without any trace of secondary phases and with no need of postsynthetic treatment. The average dimension of the NPs, ranging from 20 to 40 nm, has been tailored by adjusting the total volume and the boiling point of the reaction mixture. Mössbauer spectroscopy and DC magnetometry have revealed that the NPs present a perfectly stoichiometric Fe₃O₄ phase. The high saturation magnetization (93 (2) A·m²/kg at RT) and the extremely sharp Verwey transition (at around 120 K) shown by these NPs have no precedent. Moreover, the synthesis method has been refined to obtain NPs with octahedral morphology and suitable magnetic anisotropy, which significantly improves the magnetic hyperthemia performance. The heating power of properly PEGylated nano-octahedrons has been investigated by AC magnetometry, confirming that the NPs present negligible dipolar interactions, which leads to an outstanding magnetothermal efficiency that does not change when the NPs are dispersed in environments with high viscosity and ionic strength. Additionally, the heat production of the NPs within physiological media has been directly measured by calorimetry under clinically safe conditions, reasserting the excellent adequacy of the system for hyperthermia therapies. To the best of our knowledge, this is the first time that such bulklike magnetite NPs (with minimal size/shape polydispersity, minor agglomeration, and exceptional heating power) are chemically synthesized.

Gold-iron oxide nanohybrids: insights into colloidal stability and surface-enhanced Raman detection

Nanoparticles are acquiring an ever increasing role in analytical technologies for enhanced applications such as signalling of hazardous dyes. One challenge for the synthesis of hybrid nanomaterials is to control their shape, size and properties. The colloidal and interfacial properties of initial nanoparticles are decisive for the formation, growth and characteristics of nanohybrids. Our objective is to combine the advantages of iron oxide nanoparticles for magnetic separation with nanoscale gold for a surface enhanced Raman scattering (SERS) effect which could be used e.g. for improved detection of dye molecules. We synthesized iron oxide nanoparticles (∼10 nm) with a high saturation magnetization of around 80 Am2 kg-1 and coupled nanoscale gold to these particles. The focus was set in testing multiple approaches to combine these two materials with the goal of understanding and discussing the effect of the colloidal stability of iron oxide nanoparticles on the properties of the hybrid material. Stability is a seldom addressed issue; however, it plays a critical role for guaranteeing a homogeneous distribution of the gold on the iron oxide surface. We characterized the produced materials with UV/Vis spectroscopy, dynamic light scattering, and transmission electron microscopy, and their capability to enhance Raman signals is investigated. The seed-mediated growth method of oleate and PEG-stabilized magnetic particles yielded the best enhancement of Raman scattering for identification of the dye Rhodamin 6G. This approach can be used to couple gold nanoparticles to other surfaces and microfluidic devices. The presented method might pave the way to further applications in diagnostics or also in environmental approaches and beyond.

Magneto-mechanical treatment of human glioblastoma cells with engineered iron oxide powder microparticles for triggering apoptosis

In nanomedicine, treatments based on physical mechanisms are more and more investigated and are promising alternatives for challenging tumor therapy. One of these approaches, called magneto-mechanical treatment, consists in triggering cell death via the vibration of anisotropic magnetic particles, under a low frequency magnetic field. In this work, we introduce a new type of easily accessible magnetic microparticles (MMPs) and study the influence of their surface functionalization on their ability to induce such an effect, and its mechanism. We prepared anisotropic magnetite microparticles by liquid-phase ball milling of a magnetite powder. These particles are completely different from the often-used SPIONs: they are micron-size, ferromagnetic, with a closed-flux magnetic structure reminiscent of that of vortex particles. The magnetic particles were covered with a silica shell, and grafted with PEGylated ligands with various physicochemical properties. We investigated both bare and coated particles' in vitro cytotoxicity, and compared their efficiency to induce U87-MG human glioblastoma cell apoptosis under a low frequency rotating magnetic field (RMF). Our results indicated that (1) the magneto-mechanical treatment with bare MMPs induces a rapid decrease in cell viability whereas the effect is slower with PEGylated particles; (2) the number of apoptotic cells after magneto-mechanical treatment is higher with PEGylated particles; (3) a lower frequency of RMF (down to 2 Hz) favors the apoptosis. These results highlight a difference in the cell death mechanism according to the properties of particles used - the rapid cell death observed with the bare MMPs indicates a death pathway via necrosis, while PEGylated particles seem to favor apoptosis.

Quercetin attenuates neurotoxicity induced by iron oxide nanoparticles

Iron oxide nanoparticles (IONPs) have been proposed as targeted carriers to deliver therapeutic molecules in the central nervous system (CNS). However, IONPs may damage neural tissue via free iron accumulation, protein aggregation, and oxidative stress. Neuroprotective effects of quercetin (QC) have been proven due to its antioxidant and anti-inflammatory properties. However, poor solubility and low bioavailability of QC have also led researchers to make various QC-involved nanoparticles to overcome these limitations. We wondered how high doses or prolonged treatment with quercetin conjugated superparamagnetic iron oxide nanoparticles (QCSPIONs) could improve cognitive dysfunction and promote neurogenesis without any toxicity. It can be explained that the QC inhibits protein aggregation and acts against iron overload via iron-chelating activity, iron homeostasis genes regulation, radical scavenging, and attenuation of Fenton/Haber-Weiss reaction. In this review, first, we present brain iron homeostasis, molecular mechanisms of iron overload that induced neurotoxicity, and the role of iron in dementia-associated diseases. Then by providing evidence of IONPs neurotoxicity, we discuss how QC neutralizes IONPs neurotoxicity, and finally, we make a brief comparison between QC and conventional iron chelators. In this review, we highlight that QC as supplementation and especially in conjugated form reduces iron oxide nanoparticles neurotoxicity in clinical application.

Chelating Agent Functionalized Substrates for the Formation of Thick Films via Electrophoretic Deposition

Incorporating nanoparticles into devices for a wide range of applications often requires the formation of thick films, which is particularly necessary for improving magnetic power storage, microwave properties, and sensor performance. One approach to assembling nanoparticles into films is the use of electrophoretic deposition (EPD). This work seeks to develop methods to increase film thickness and stability in EPD by increasing film-substrate interactions via functionalizing conductive substrates with various chelating agents. Here, we deposited iron oxide nanoparticles onto conductive substrates functionalized with three chelating agents with different functional moieties and differing chelating strengths. We show that increasing chelating strength can increase film-substrate interactions, resulting in thicker films when compared to traditional EPD. Results will also be presented on how the chelating strength relates to film formation as a function of deposition conditions. Yield for EPD is influenced by deposition conditions including applied electric field, particle concentration, and deposition time. This work shows that the functionalization of substrates with chelating agents that coordinate strongly with nanoparticles (phosphonic acid and dopamine) overcome parameters that traditionally hinder the deposition of thicker and more stable films, such as applied electric field and high particle concentration. We show that functionalizing substrates with chelating agents is a promising method to fabricate thick, stable films of nanoparticles deposited via EPD over a larger processing space by increasing film-substrate interactions.

Poly(ethylene glycol)-Alendronate-Coated Magnetite Nanoparticles Do Not Alter Cardiovascular Functions and Red Blood Cells' Properties in Hypertensive Rats

In this study, magnetite nanoparticles were prepared and coated with poly(ethylene glycol) terminated by alendronate to ensure firm binding to the iron oxide surface. Magnetic nanoparticles, designated as magnetite coated with poly(ethylene glycol)-alendronate (Fe3O4@PEG-Ale), were characterized in terms of number-average (Dn) and hydrodynamic (Dh) size, ζ-potential, saturation magnetization, and composition. The effect of particles on blood pressure, vascular functions, nitric oxide (NO), and superoxide production in the tissues of spontaneously hypertensive rats, as well as the effect on red blood cell (RBC) parameters, was investigated after intravenous administration (1 mg Fe3O4/kg of body weight). Results showed that Fe3O4@PEG-Ale particles did negatively affect blood pressure, heart rate and RBC deformability, osmotic resistance and NO production. In addition, Fe3O4@PEG-Ale did not alter functions of the femoral arteries. Fe3O4@PEG-Ale induced increase in superoxide production in the kidney and spleen, but not in the left heart ventricle, aorta and liver. NO production was reduced only in the kidney. In conclusion, the results suggest that acute intravenous administration of Fe3O4@PEG-Ale did not produce negative effects on blood pressure regulation, vascular function, and RBCs in hypertensive rats.

Bio-inspired surface modification of iron oxide nanoparticles for active stabilization in hydrogels

Biological materials employ a variety of dynamic interactions in sophisticated composite structures to function adaptively on different time and length scales. Inspired by such designs we develop a novel surface modification approach to promote dynamic interactions between nanoparticles and polymer chains in physical and double network hydrogels. Physical hydrogels are formed via reversible complexation of borate ions with poly(vinyl alcohol) (PVA) and chemical crosslinks are introduced by electron beam irradiation. Dopamine is used for surface modification of magnetic iron oxide nanoparticles (MNPs) in two different ways: the direct treatment results in anchoring via catechol groups, whereas the indirect method leaves the catechol group on the free surface of MNPs. Although the former particles show very good colloidal stability, they lower the network connectivity, which results in lower plateau modulus, faster terminal relaxation, and lower yield stress, presumably due to imposing an extra distance between PVA chains. In contrast to this passive design, the latter particles actively reinforce the network by forming clusters of physical bonds between catechol groups of the individual particles and the monodiol complexes of the borate ions and PVA chains. Moreover, the additional complexes formed upon the introduction of nanoparticles with active surfaces provide further energy dissipation potential and therefore enhance the toughness. This approach can help develop novel hydrogels with superior toughness and multiple stimuli-responsiveness.

Sustainable and Green Synthesis of Stanol Esters from Oil Wastes

The recombinant lipase ofOphiostoma piceae (OPEr) is characterized by its prominent sterol esterase activity. The protein was immobilized on magnetic nanoparticles, giving four enzyme variants that have been tested in solvent-free transesterification of methyl oleate and sitostanol. The yields of stanol esters reached 85%, and the catalysts can be reused. Stanol esters were also obtained in a two-step cascade reaction; a mixture of fatty acid methyl esters was enzymatically synthesized from cooking oil wastes and then used for stanol transesterification. An 85% conversion was achieved in 2 h from the second cycle onward, maintaining the activity over 5 cycles. The biocatalysts can be safely used since they don't release toxic compounds for HeLa and A549 cell lines. These procedures comply with the principles of green chemistry and contribute to the sustainable production of these nutraceuticals from secondary raw materials, like the lipid fraction from industrial or agricultural residues.

A hybrid nanosensor based on novel fluorescent iron oxide nanoparticles for highly selective determination of Hg2+ ions in environmental samples

Novel fluorescent iron oxide nanoparticles were prepared for the determination of Hg²⁺ in real samples. The fluorescence behaviors of the sensor were examined using absorption and fluorescence (steady-state, time-resolved, 3-D, EEM) spectroscopies.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Isolation of exosomes from whole blood by a new microfluidic device: proof of concept application in the diagnosis and monitoring of pancreatic cancer

BACKGROUND

Exosomes are endocytic-extracellular vesicles with a diameter around 100 nm that play an essential role on the communication between cells. In fact, they have been proposed as candidates for the diagnosis and the monitoring of different pathologies (such as Parkinson, Alzheimer, diabetes, cardiac damage, infection diseases or cancer).

RESULTS

In this study, magnetic nanoparticles (Fe3O4NPs) were successfully functionalized with an exosome-binding antibody (anti-CD9) to mediate the magnetic capture in a microdevice. This was carried out under flow in a 1.6 mm (outer diameter) microchannel whose wall was in contact with a set of NdFeB permanent magnets, giving a high magnetic field across the channel diameter that allowed exosome separation with a high yield. To show the usefulness of the method, the direct capture of exosomes from whole blood of patients with pancreatic cancer (PC) was performed, as a proof of concept. The captured exosomes were then subjected to analysis of CA19-9, a protein often used to monitor PC patients.

CONCLUSIONS

Here, we describe a new microfluidic device and the procedure for the isolation of exosomes from whole blood, without any need of previous isolation steps, thereby facilitating translation to the clinic. The results show that, for the cases analyzed, the evaluation of CA19-9 in exosomes was highly sensitive, compared to serum samples.

Surface engineering of magnetic iron oxide nanoparticles by polymer grafting: synthesis progress and biomedical applications

Magnetic iron oxide nanoparticles (IONPs) have wide applications in magnetic resonance imaging (MRI), biomedicine, drug delivery, hyperthermia therapy, catalysis, magnetic separation, and others. However, these applications are usually limited by irreversible agglomeration of IONPs in aqueous media because of their dipole-dipole interactions, and their poor stability. A protecting polymeric shell provides IONPs with not only enhanced long-term stability, but also the functionality of polymer shells. Therefore, polymer-grafted IONPs have recently attracted much attention of scientists. In this tutorial review, we will present the current strategies for grafting polymers onto the surface of IONPs, basically including "grafting from" and "grafting to" methods. Available functional groups and chemical reactions, which could be employed to bind polymers onto the IONP surface, are comprehensively summarized. Moreover, the applications of polymer-grafted IONPs will be briefly discussed. Finally, future challenges and perspectives in the synthesis and application of polymer-grafted IONPs will also be discussed.

Taurine-Conjugated Mussel-Inspired Iron Oxide Nanoparticles with an Elongated Shape for Effective Delivery of Doxorubicin into the Tumor Cells

Multifunctional iron oxide magnetic nanoparticles, among them nanorods, were prepared with a mussel-inspired polydopamine (pDA) surface coating agent for cancer therapeutics. Taurine, a free sulfur-containing ß amino acid, was grafted on the pDA at the iron oxide nanoparticle surface to enhance its biocompatibility and targeted delivery action. Doxorubicin (DOX), an anticancer drug, was loaded on the prepared nanovehicles with an entrapment efficiency of 70.1%. Drug release kinetics were then analyzed using UV-vis and fluorescence spectroscopies, suggesting the pH-responsive behavior of the developed nanovehicle. The developed system was then tested on PC-3 cell lines to check its cellular response. Confocal microscopy observations and (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) and Annexin V-FITC assays used to evaluate cell toxicity and apoptosis reveal a dose-dependent nature of nanorods and can overcome the side effects of using free DOX with a targeted action.

In vitro Biological Tests as the First Tools To Validate Magnetic Nanotheranostics for Colorectal Cancer Models

Colorectal cancer (CRC) remains a leading cause of cancer death. Nanotechnology has focused on reaching more effective treatments. In this concern, magnetic nanoparticles (MNPs) have been studied for a wide range of biomedical applications related to CRC, such as diagnostic imaging, drug delivery and thermal therapy. However, limited research is currently found in the open literature that refers to nanosystems combining all these mentioned areas (theranostics). When developing nanosystems intended as theranostics applied to CRC, possible variations between patients must be considered. Therefore, multiple in vitro assays are required as guidance for future preclinical and clinical trials. The objective of this contribution is to evaluate the available and recent literature regarding the interactions of MNP and CRC models, aiming to critically analyze the information given by the commonly used assays and evaluate the data provided by each one with a view to implementing this novel technology in CRC diagnostics and therapy.

Multifunctional magnetic iron oxide nanoparticles: an advanced platform for cancer theranostics

Multifunctional magnetic nanoparticles and derivative nanocomposites have aroused great concern for multimode imaging and cancer synergistic therapies in recent years. Among the rest, functional magnetic iron oxide nanoparticles (Fe3O4 NPs) have shown great potential as an advanced platform because of their inherent magnetic resonance imaging (MRI), biocatalytic activity (nanozyme), magnetic hyperthermia treatment (MHT), photo-responsive therapy and drug delivery for chemotherapy and gene therapy. Magnetic Fe3O4 NPs can be synthesized through several methods and easily surface modified with biocompatible materials or active targeting moieties. The MRI capacity could be appropriately modulated to induce response between T1 and T2 modes by controlling the size distribution of Fe3O4 NPs. Besides, small-size nanoparticles are also desired due to the enhanced permeation and retention (EPR) effect, thus the imaging and therapeutic efficiency of Fe3O4 NP-based platforms can be further improved. Here, we firstly retrospect the typical synthesis and surface modification methods of magnetic Fe3O4 NPs. Then, the latest biomedical application including responsive MRI, multimodal imaging, nanozyme, MHT, photo-responsive therapy and drug delivery, the mechanism of corresponding treatments and cooperation therapeutics of multifunctional Fe3O4 NPs are also be explained. Finally, we also outline a brief discussion and perspective on the possibility of further clinical translations of these multifunctional nanomaterials. This review would provide a comprehensive reference for readers to understand the multifunctional Fe3O4 NPs in cancer diagnosis and treatment.

Physical and Biological Evaluation of Low-Molecular-Weight Hyaluronic Acid/Fe3O4 Nanoparticle for Targeting MCF7 Breast Cancer Cells

Low-molecular-weight hyaluronic acid (LMWHA) was integrated with superparamagnetic Fe₃O₄ nanoparticles (Fe₃O₄ NPs). The size distribution, zeta potential, viscosity, thermogravimetric and paramagnetic properties of the LMWHA-Fe₃O₄ NPs were systematically examined. For cellular experiments, MCF7 breast cancer cell line was carried out. In addition, the cell targeting ability and characteristics of the LMWHA-Fe₃O₄ NPs for MCF7 breast cancer cells were analyzed using the thiocyanate method and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The experimental results showed that the LMWHA-Fe₃O₄ NPs were not only easily injectable due to their low viscosity, but also exhibited a significant superparamagnetic property. Furthermore, the in vitro assay results showed that the NPs had negligible cytotoxicity and exhibited a good cancer cell targeting ability. Overall, the results therefore suggest that the LMWHA-Fe₃O₄ NPs have considerable potential as an injectable agent for enhanced magnetic resonance imaging (MRI) and/or hyperthermia treatment in breast cancer therapy.

SiO2-PVA-Fe(acac)3 Hybrid Based Superparamagnetic Nanocomposites for Nanomedicine: Morpho-textural Evaluation and In Vitro Cytotoxicity Assay

A facile sol-gel route has been applied to synthesize hybrid silica-PVA-iron oxide nanocomposite materials. A step-by-step calcination (processing temperatures up to 400 °C) was applied in order to oxidize the organics together with the iron precursor. Transmission electron microscopy, X-ray diffraction, small angle neutron scattering, and nitrogen porosimetry were used to determine the temperature-induced morpho-textural modifications. In vitro cytotoxicity assay was conducted by monitoring the cell viability by the means of MTT assay to qualify the materials as MRI contrast agents or as drug carriers. Two cell lines were considered: the HaCaT (human keratinocyte cell line) and the A375 tumour cell line of human melanoma. Five concentrations of 10 µg/mL, 30 µg/mL, 50 µg/mL, 100 µg/mL, and 200 µg/mL were tested, while using DMSO (dimethylsulfoxid) and PBS (phosphate saline buffer) as solvents. The HaCaT and A375 cell lines were exposed to the prepared agent suspensions for 24 h. In the case of DMSO (dimethyl sulfoxide) suspensions, the effect on human keratinocytes migration and proliferation were also evaluated. The results indicate that only the concentrations of 100 μg/mL and 200 μg/mL of the nanocomposite in DMSO induced a slight decrease in the HaCaT cell viability. The PBS based in vitro assay showed that the nanocomposite did not present toxicity on the HaCaT cells, even at high doses (200 μg/mL agent).

The Role of Magnetic Nanoparticles in Cancer Nanotheranostics

Technological development is in constant progress in the oncological field. The search for new concepts and strategies for improving cancer diagnosis, treatment and outcomes constitutes a necessary and continuous process, aiming at more specificity, efficiency, safety and better quality of life of the patients throughout the treatment. Nanotechnology embraces these purposes, offering a wide armamentarium of nanosized systems with the potential to incorporate both diagnosis and therapeutic features, towards real-time monitoring of cancer treatment. Within the nanotechnology field, magnetic nanosystems stand out as complex and promising nanoparticles with magnetic properties, that enable the use of these constructs for magnetic resonance imaging and thermal therapy purposes. Additionally, magnetic nanoparticles can be tailored for increased specificity and reduced toxicity, and functionalized with contrast, targeting and therapeutic agents, revealing great potential as multifunctional nanoplatforms for application in cancer theranostics. This review aims at providing a comprehensive description of the current designs, characterization techniques, synthesis methods, and the role of magnetic nanoparticles as promising nanotheranostic agents. A critical appraisal of the impact, potentialities and challenges associated with each technology is also presented.

Interaction of cellulose and nitrodopamine coated superparamagnetic iron oxide nanoparticles with alpha-lactalbumin

The adsorption of BLA on the SPIOns, and their non-toxic nature of the bioconjugate make these nanoparticles new model nanostructures for nanomedicine orientated applications.

Experimental and theoretical insights into the synthesis of α-aminoalkyl naphthol derivatives catalyzed by a manganese complex immobilized on multi-walled carbon nanotubes

The full details of the synthesis of α-aminoalkyl naphthol derivatives promoted by a manganese complex immobilized on multi-walled carbon nanotubes (CNTs@Mn-bpy) are described, with a particular focus on theoretical mechanistic aspects. After characterization studies on the nanocatalyst prepared from a homogeneous manganese complex, we optimized the catalytic reaction conditions, and the heterogeneous nanocatalyst showed important features such as higher efficiency and reusability compared to other reported catalysts. α-Aminoalkyl naphthol derivatives were obtained in excellent chemical yields and short reaction times and with high turnover numbers. In order to better understand the effect of CNT@Mn-bpy as a nanocatalyst on the reaction mechanism, the final step of the described synthesis has been investigated using density functional theory (DFT). Compared to the uncatalyzed reaction, the activation energy of the catalyzed reaction is lowered by 34.07 kcal mol^-1. Also, our theoretical calculation shows that if the Mn metal of CNT@Mn-bpy is replaced with the Cu metal, the catalytic effect of this nanocatalyst on the activation energy of the studied reaction was significantly decreased.

Advances in the Application of Magnetic Nanoparticles for Sensing

Magnetic nanoparticles (MNPs) are of high significance in sensing as they provide viable solutions to the enduring challenges related to lower detection limits and nonspecific effects. The rapid expansion in the applications of MNPs creates a need to overview the current state of the field of MNPs for sensing applications. In this review, the trends and concepts in the literature are critically appraised in terms of the opportunities and limitations of MNPs used for the most advanced sensing applications. The latest progress in MNP sensor technologies is overviewed with a focus on MNP structures and properties, as well as the strategies of incorporating these MNPs into devices. By looking at recent synthetic advancements, and the key challenges that face nanoparticle-based sensors, this review aims to outline how to design, synthesize, and use MNPs to make the most effective and sensitive sensors.

Effects of biological buffer solutions on the peroxidase-like catalytic activity of Fe3O4 nanoparticles

Iron oxide nanoparticles (IONPs) are frequently used in biomedical applications due to their magnetic properties and putative chemical stability. Nevertheless, their well-known ability to mimic some features of the peroxidase enzyme activity under specific conditions of pH and temperature could lead to the formation of potentially harmful free radical species. In addition to the intrinsic enzyme-like activity of IONPs, the buffer solution is an important external factor that can alter dramatically the IONP activity because the buffer species can interact with the surface of the particles. In our study, IONP activity was evaluated in different buffering solutions under different experimental conditions and predominant free radical species were measured by electron paramagnetic resonance using the spin-trap 5,5-dimethyl-1-pyrroline N-oxide (DMPO). The formation kinetics of the reactive oxygen species were studied by UV-visible spectroscopy with TMB and DAB peroxidase substrates. We found that the highest catalytic oxidation of peroxidase substrates and free radical generation were achieved in acetate buffer, while phosphate buffer inhibited the peroxidase-like activity of IONPs in a concentration dependent manner. When emulating the physiological conditions, a lower catalytic activity was observed at pH 7.4 when compared to that at pH 5.0. Also, in phosphate buffered saline (PBS), we observed an enhancement in the peroxidase substrate oxidation rate that was not accompanied by an increase in DMPO/adduct formation which could be related to a non-specific oxidation catalyzed by the chloride ion. Similar observations were found after the addition of a bicarbonate to HEPES buffer. TMB oxidation did not occur when the reaction was conducted with free iron ions from metal salts with the same concentration of the IONPs (0.33 Fe2+ and 0.66 Fe3+). However, we observed even higher catalytic activities than those when doubling the IONP concentration when they are combined with the free iron salts. These results indicate that biological buffering solutions need to be carefully considered when evaluating IONP catalytic activity and their potential toxicological effects since under physiological conditions of pH, salinity and buffering species, the peroxidase-like activity of IONPs is dramatically reduced.

Anisotropic CoFe2O4@Graphene Hybrid Aerogels with High Flux and Excellent Stability as Building Blocks for Rapid Catalytic Degradation of Organic Contaminants in a Flow-Type Setup

Macroscopic three-dimensional catalytic materials could overcome the poor operability and avoid secondary pollution of common powdery counterparts, especially in flow-type setups. However, conventional isotropic graphene-based aerogels and foams have randomly distributed graphene sheets, which may cause stream erosion and reduce the flux seriously. Herein, for the first time, we design and fabricate a novel anisotropic CoFe₂O₄@graphene hybrid aerogel (CFO@GA-A) with a hydrothermal synthesis followed by directional-freezing and freeze-drying for a tube-like flow-type setup analogous to a wastewater discharge pipeline. The long and vertically aligned pores inside the aerogel provide an exceptional flux of 1100 L m^-2 h^-1, 450% higher than that of the rough and zigzag paths in the isotropic CoFe₂O₄@graphene hybrid aerogel (CFO@GA-I), and the leaching of metal ions is obviously inhibited by relieving the erosion of CoFe₂O₄. Besides, the CFO@GA-A could sustain the scour of high-speed flowing wastewater and maintain its structural stability. Therefore, organic contaminants of indigo carmine, methyl orange, orange II, malachite green, phenol, and norfloxacin could readily flow over the nanocatalysts and be degraded rapidly within 7.5-12.5 min at varied flow rates from 60 to 120 mL h^-1. The CFO@GA-A also exhibits a much better long-term stability with removal efficiencies toward indigo carmine at 100%, 91%, and 85% for at least 30 h (60 mL h^-1), 25 h (90 mL h^-1), and 21 h (120 mL h^-1), respectively. On the contrary, the CFO@GA-I exhibits unsatisfactory removal efficiencies of <40%. Interestingly, CFO@GA-A could also serve as building blocks to stack on each other for degrading intense flowing wastewater, exhibiting an outstanding composability. The high-flux and long-term stability make the CFO@GA-A promising as an ideal catalytic material for wastewater treatments.

Red blood cells as an efficient in vitro model for evaluating the efficacy of metallic nanoparticles

Blood and the linings of blood vessels may be regarded as a fifth tissue type. The human body contains 5 × 10⁹ red blood cells (RBCs) per ml, a total of 2.5 × 10¹³ cells in the 5 l of blood present in the body. With an average lifetime of 125 days, human RBCs are destroyed by leukocytes in the spleen and liver. Nowadays red blood cells are extensively used to study various metabolic functions. Nanoparticles (NP) are being widely accepted for drug delivery system. This review summarizes the red blood cells, NPs and their characteristics on the basis of the RBC components along with drug delivery systems through RBCs. Further, we also discussed that how erythrocytes can be used as an efficient in vitro model for evaluating the efficacy of various nanocomposite materials.

Effect of the Immobilization Strategy on the Efficiency and Recyclability of the Versatile Lipase from Ophiostoma piceae

The recombinant lipase from Ophiostoma piceae OPEr has demonstrated to have catalytic properties superior to those of many commercial enzymes. Enzymatic crudes with OPEr were immobilized onto magnetite nanoparticles by hydrophobicity (SiMAG-Octyl) and by two procedures that involve covalent attachment of the protein (mCLEAs and AMNP-GA), giving three nanobiocatalysts with different specific activity in hydrolysis of p-nitrophenyl butyrate (pNPB) and good storage stability at 4 °C over a period of 4 months. Free OPEr and the different nanobiocatalysts were compared for the synthesis of butyl esters of volatile fatty acids C4 to C7 in reactions containing the same lipase activity. The esterification yields and the reaction rates obtained with AMNP-GA-OPEr were in general higher or similar to those observed for the free enzyme, the mCLEAs-OPEr, and the non-covalent preparation SiMAG-Octyl-OPEr. The time course of the esterification of the acids C4 to C6 catalyzed by AMNP-GA-OPEr was comparable. The synthesis of the C7 ester was slower but very efficient, admitting concentrations of heptanoic acid up to 1 M. The best 1-butanol: acid molar ratio was 2:1 for all the acids tested. Depending on the substrate, this covalent preparation of OPEr maintained 80–96% activity over 7 cycles, revealing its excellent properties, easy recovery and recycling, and its potential to catalyze the green synthesis of chemicals of industrial interest.

Nanomechanical Microfluidic Mixing and Rapid Labeling of Silica Nanoparticles using Allenamide-Thiol Covalent Linkage for Bioimaging

Rapid surface functionalization of nanomaterials using covalent linkage following "green chemistry" remains challenging, and the quest for developing simple protocols is persisting. We report a nanomechanical microfluidic approach for the coupling of allenamide functionalized organic derivatives on the surface of thiol-modified silica nanoparticles using allenamide-thiol chemistry. The coupling principle involves the use of a microfluidic surface acoustic wave device that generates acoustic streaming-based chaotic fluid micromixing that enables mixing of laterally flowing fluids containing active components. This approach was used to demonstrate the direct surface labeling of thiol-modified silica nanoparticles using a selected group of modified fluorescent tags containing allenamide handles and achieved a total labeling efficiency of 83-90%. This green approach enabled a highly efficient surface functionalization under aqueous conditions, with tunable control over the conjugation process via the applied field. The dye-labeled silica particles were characterized using various analytical techniques and found to be biocompatible with potential in live cell bioimaging. It is envisaged that this bioconjugation strategy will find numerous applications in the field of bioimaging and drug delivery.

MoS2 nanohybrid as a fluorescence sensor for highly selective detection of dopamine

Fluorescence sensors for biologically active molecules are catching attention due to their good performance and simplicity. Herein, we report a fluorescence sensor for the selective and sensitive detection of dopamine (DA) in aqueous samples. MoS2 nanohybrid material composed of MoS2 quantum dots dispersed over MoS2 nanosheets (MoS2 QDNS) in alkaline medium was employed as the fluorescent probe. In the presence of DA, the photoluminescence intensity of MoS2 QDNS was quenched linearly with increasing concentration of the former. The quenching mechanism was found to operate via Förster resonance energy transfer (FRET), and the inner filter effect (IFE). The QDNS sensor demonstrates high selectivity towards DA, especially in the presence of ascorbic acid and uric acid, which are the most potential interference for DA in biological systems. The sensitivity of the system was as low as 0.9 nM and demonstrated two linear ranges from 2.5 nM to 5.0 μM and from 5.0 μM to 10.4 μM. The sensor demonstrated a remarkable ability in the analysis of real blood samples and showed excellent potential for visual detection.

Magnetic nanoarchitectures for cancer sensing, imaging and therapy

The use of magnetic nanoparticles for sensing and theranostics of cancer has grown substantially in the last decade. Since the pioneering studies, which reported magnetic nanoparticles for bio-applications more than fifteen years ago, nanomaterials have increased in complexity with different shapes (nanoflowers, nanospheres, nanocubes, nanostars etc.) and compositions (e.g. core-shell) of nanoparticles for an increase in the sensitivity (imaging or sensing) and efficiency through synergistic treatments such as hyperthermia and drug delivery. In this review, we describe recent examples concerning the use of magnetic nanoparticles for bio-applications, from the surface functionalization methods to the development of cancer sensors and nanosystems for magnetic resonance and other imaging methodologies. Multifunctional nanosystems (nanocomposites, core shell nanomaterials) for theranostic applications involving treatments such as hyperthermia, photodynamic therapy, targeted drug delivery, and gene silencing are also described. These nanomaterials could be the future of medicine, although their complexity raises concerns about their safety.

Bioconjugation and Fluorescence Labeling of Iron Oxide Nanoparticles Grafted with Bromomaleimide-Terminal Polymers

Iron oxide nanoparticles have been widely applied in biomedical applications for their unique physical properties. Despite the relatively mature synthetic approaches for iron oxide nanoparticles, surface modification strategies for obtaining particles with satisfactory biofunctionality are still urgently needed to meet the challenge of nanomedicine. Herein, we report a surface modification and biofunctionalization strategy for iron oxide-based magnetic nanoparticles based on a dibromomaleimide (DBM)-terminated polymer with brushed polyethylene glycol (PEG) chains. PEG acrylate and phosphonate monomers, serving as antibiofouling and surface anchoring compartments for iron oxide nanoparticles, were incorporated utilizing a novel DBM containing reversible addition-fragmentation chain transfer (RAFT) agent. The particles prepared through this new surface architecture possessed high colloidal stability in a physiological buffer and the capacity of covalent conjugation with biomolecules for targeting. Cell tracking of the molecular probes was achieved concomitantly by exploiting DBM conjugation-induced fluorescence of the nanoparticles.

Tenacic Acids: A New Class of Tenacious Binders to Metal Oxide Surfaces

The backbone of 2-hydroxyisophthalic acid was identified as a potential metal oxide anchor because of the perfect alignment of all three of its donor groups for binding to inorganic surfaces. It can therefore be used in the design of organic linkers for metal oxide based hybrid materials. Optimized and scalable methods for the synthesis of 2-hydroxyisophthalic acid (1) and its 5-substituted derivatives: 5-bromo- (2), 5-sulfooxy- (3), 5-hydroxy- (4), and 5-PEG600 (5) are presented. Dynamic light scattering (DLS) demonstrated that compound 2 inhibits Fe(OH)3 precipitation when FeIII aqueous solutions are titrated with NaOH, while similar titrations in the presence of the structurally-related isophthalic and salicylic acids, both missing the third donor group, show turbidity at pHs as low as 2.3 and 3.5, respectively. The adduct synthesized from 4.5 nm γ-Fe2 O3 nanoparticles and 5 is water-, alcohol- and CH2 Cl2 -soluble, and forms stable aqueous colloids in the pH range of 4.4-8.7. Moreover, at a pH close to neutral these colloids survive at 100 °C, demonstrating the high practicality of 2-hydroxyisophthalic acid for nanoparticulate inorganic/organic hybrid material design.