Cyclometallated ruthenium complex-modified upconversion nanophosphors for selective detection of Hg2+ ions in water

Calix[4]arene-based Supramolecular Gels for Mercury Ion Removal in Water

A calix[4]arene-based gelator 1, with lower-rim mono triazolylpyridine group, capable of spontaneous self-assembly into microspheres in different ethanol/H2 O mixtures, is synthesized. The concentration-dependent 1 H NMR spectra and X-ray single-crystal structure of 1 provided evidence for self-assembly of gelator 1 via cooperative interactions of intermolecular noncovalent forces. Furthermore, metallogels by self-assembly of 1 was found to exhibit remarkable selectivity toward Hg2+ ions. 1 H NMR spectra support that Hg2+ ion was bound to the nitrogen atoms of two coordination sites of 1, which composed of triazole and pyridine. Moreover, the results of field emission scanning electron microscopy and rheology experiments indicated that Hg2+ ions not only enhanced the gelling ability of gelator 1 in ethanol but also led to morphological change of its self-assembly through metal-ligand interactions. Finally, the in situ gelation, triggered by mixing a gelator solution of 1 in ethanol with water samples such as deionized (DI), tap, and lake water, leads to the effective removal of Hg(II) from a water sample which reduced from 400 to 1.6 ppm.

Ratiometric upconversion luminescence nanoprobes from construction to sensing, imaging, and phototherapeutics

In terms of the combined advantages of upconversion luminescence (UCL) properties and dual-signal ratiometric outputs toward specific targets, the ratiometric UCL nanoprobes exhibit significant applications. This review summarizes and discusses the recent advances in ratiometric UCL nanoprobes, mainly including the construction of nanoprobe systems for sensing, imaging, and phototherapeutics. First, the construction strategies are introduced, involving different types of nanoprobe systems, construction methods, and ratiometric dual-signal modes. Then, the sensing applications are summarized, involving types of targets, sensing mechanisms, sensing targets, and naked-eye visual detection of UCL colors. Afterward, the phototherapeutic applications are discussed, including bio-toxicity, bio-distribution, biosensing, and bioimaging at the level of living cells and small animals, and biomedicine therapy. Particularly, each section is commented on by discussing the state-of-the-art relevant studies on ratiometric UCL nanoprobe systems. Moreover, the current status, challenges, and perspectives in the forthcoming studies are discussed. This review facilitates the exploration of functionally luminescent nanoprobes for excellent sensing, imaging, biomedicine, and multiple applications in significant fields.

Applications of upconversion nanoparticles in analytical and biomedical sciences: a review

Lanthanide-doped upconversion nanoparticles (UCNPs) have gained more attention from researchers due to their unique properties of photon conversion from an excitation/incident wavelength to a more suitable emission wavelength at a designated site, thus improving the scope in the life sciences field. Due to their fascinating and unique optical properties, UCNPs offer attractive opportunities in theranostics for early diagnostics and treatment of deadly diseases such as cancer. Also, several efforts have been made on emerging approaches for the fabrication and surface functionalization of luminescent UCNPs in optical biosensing applications using various infrared excitation wavelengths. In this review, we discussed the recent advancements of UCNP-based analytical chemistry approaches for sensing and theranostics using a 980 nm laser as the excitation source. The key analytical merits of UNCP-integrated fluorescence analytical approaches for assaying a wide variety of target analytes are discussed. We have described the mechanisms of the upconversion (UC) process, and the application of surface-modified UCNPs for in vitro/in vivo bioimaging, photodynamic therapy (PDT), and photothermal therapy (PTT). Based on the latest scientific achievements, the advantages and disadvantages of UCNPs in biomedical and optical applications are also discussed to overcome the shortcomings and to improve the future study directions. This review delivers beneficial practical information of UCNPs in the past few years, and insights into their research in various fields are also discussed precisely.

Determination and Imaging of Small Biomolecules and Ions Using Ruthenium(II) Complex-Based Chemosensors

Luminescence chemosensors are one of the most useful tools for the determination and imaging of small biomolecules and ions in situ in real time. Based on the unique photo-physical/-chemical properties of ruthenium(II) (Ru(II)) complexes, the development of Ru(II) complex-based chemosensors has attracted increasing attention in recent years, and thus many Ru(II) complexes have been designed and synthesized for the detection of ions and small biomolecules in biological and environmental samples. In this work, we summarize the research advances in the development of Ru(II) complex-based chemosensors for the determination of ions and small biomolecules, including anions, metal ions, reactive biomolecules and amino acids, with a particular focus on binding/reaction-based chemosensors for the investigation of intracellular analytes' evolution through luminescence analysis and imaging. The advances, challenges and future research directions in the development of Ru(II) complex-based chemosensors are also discussed.

Intelligent multicolor nano-sensor based on nontoxic dual fluoroprobe and MOFs for colorful consecutive detection of Hg2+ and cysteine

Ultrasensitive detection of Hg²⁺ in aquatic ecosystems is of great significance due to its high toxicity and ubiquity in water. Herein, using a one-step in-situ synthesis method, blue fluorescent carbon dots (CDs), red fluorescent InP/ZnS quantum dots (InPQDs), and MOFs (ZIF-8) integrated multicolor nano-sensor CDs/InPQDs@ZIF-8 was constructed for consecutive visual detection of Hg²⁺ and Cys. The InPQDs can act as the response unit for Hg²⁺ and Cys, with the limit of detection (LOD) of 8.68 and 37.96 nM, respectively. Significantly, the low detection limit combines with good specificity and accuracy of the nano-sensor meet the requirement for the safety monitoring and control of Hg²⁺ in drinking and environmental water. Moreover, the color recognition and processing software installed on smart phone can realize the real-time and rapid sensing of Hg²⁺ and Cys. A logic gate circuit was also devised, providing the possibilities for the application of the nano-sensor in the field of intelligent devices. As far as we know, this was the first example to apply InPQDs to the continuous multicolor visual detection of Hg²⁺ and Cys, which provided reference for the construction of environmentally-friendly dual emission fluorescent sensors for hazardous substance monitoring.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Engineering of an Upconversion Luminescence Sensing Platform Based on the Competition Effect for Mercury-Ion Monitoring in Green Tea

Accurately monitoring mercury ions (Hg²⁺) in food and agriculture-related matrixes (e.g., green tea) is of great significance to safeguard food safety. Here, we employed upconversion nanoparticles (UCNPs) and gold nanoparticles (AuNPs) to engineer a cysteine (Cys)-assisted anti-Stokes luminescence sensing platform (UCNPs-AuNPs) for precisely detecting residual Hg²⁺ in green tea through the competition effect. Initially, AuNPs could effectively quench the luminescence of UCNPs through the luminescence resonance energy transfer process, which was then interrupted by Cys-triggered AuNP aggregation via Au-S, thereby restoring UCNP luminescence. Interestingly, owing to the competition effect with AuNPs toward Cys, Hg²⁺ could weaken the luminescence restoring efficiency, achieving a Hg²⁺ concentration-dependent luminescence change. On this basis, a facile, reliable, and sensitive upconversion luminescence sensing platform for monitoring residual Hg²⁺ in green tea was successfully established. This study offers a novel insight into integrating the competition effect and anti-Stokes luminescence for food- and agriculture-related contaminant monitoring.

Fluorescence sensing of cyanide anions based on Au-modified upconversion nanoassemblies

Cyanides have been recognized as one of the most toxic chemicals and are harmful to the environment and human beings. Herein, fluorescence resonance energy transfer (FRET)-based upconversion nanoprobes for cyanide anions have been designed and prepared by assembling Au nanoparticles (NPs) on core-shell-structured NaYF₄:Yb,Er@NaYF₄:Yb upconversion NPs (csUCNPs), where csUCNPs act as the energy donor and Au NPs act as the energy acceptor. The Au content was optimized in order to have a large quenching efficiency in upconversion luminescence (UCL). The cyanide-mediated redox reaction leads to the consumption of Au NPs, resulting in UCL recovery by the inhibition of the FRET process. On the basis of these features, csUCNP/Au nanoassemblies can serve as sensitive nanoprobes for cyanide ions with a detection limit of 1.53 μM. Moreover, no significant UCL variation was observed upon the addition of other interfering ions, showing the excellent selectivity of nanoprobes toward cyanide ion sensing. The easy preparation of such upconversion-based nanoprobes provides a promising platform for sensitive and selective sensing of other hazardous species.

First cycloruthenation of 2-alkenylpyridines: synthesis, characterization and properties

Several cyclometalated ruthenium complexes 1-5 with 2-alkenylpyridines as C,N-chelating ligands were synthesized and then characterized by NMR, MS, IR and UV-Vis spectra. According to the single crystal of complex 2, it is evident that carbon from vinyl group is successfully bonded to Ru(ii) center. Moreover, the Ru-N bond trans to the Ru-C bond is elongated (2.127(5) Å), which is consistent with the strong trans effect of the carbon atom compared to that of the nitrogen atom. With different electron-donating groups linked to vinyl, these complexes exhibited regular changes in MLCT absorption bands, which were identified by UV-Vis and CV spectra in combination with DFT and TD-DFT. Interestingly, protonated intermediate species of these complexes in acidic solutions were tracked by the absorption changes and MS spectra, which displayed a possible protonation process of these complexes with the cleavage of Ru-C σ bonds.

PAA Modified Upconversion Nanoparticles for Highly Selective and Sensitive Detection of Cu2+ Ions

Detection of the Cu²⁺ ions is crucial because of its environmental and biological implications. The fluorescent-based organic sensors are not suitable for Cu²⁺ detection due to their short penetration depth caused by the UV/visible excitation source. Therefore, we have demonstrated a highly sensitive and selective near-infrared (NIR) excitable poly(acrylic acid) (PAA) coated upconversion nanoparticles (UCNPs) based sensor for Cu²⁺ detection. We construct the PAA modified Na(Yb, Nd)F₄@Na(Yb, Gd)F₄:Tm@NaGdF₄ core-shell-shell structured UCNPs based sensor via a co-precipitation route. The upconversion emission intensity of the PAA-UCNPs decreases linearly with the increase in the Cu²⁺ concentration from 0.125 to 3.125 μM due to the copper carboxylate complex formation between Cu²⁺ and PAA-UCNPs. The calculated detection limit of the PAA-UCNPs based sensor is 0.1 μM. The PAA-UCNPs based sensor is very sensitive and selective toward detecting the Cu²⁺ ions, even when the Cu²⁺ co-exist with other metal ions. The EDTA addition has significantly reversed the upconversion emission quenching by forming the EDTA-Cu²⁺ complex based on their greater affinity toward the Cu²⁺. Therefore, the PAA-UCNPs based sensor can be a promising candidate for Cu²⁺ detection because of their higher sensitivity and selectivity under 980 nm NIR excitation.

Nanoporous fluorescent sensor based on upconversion nanoparticles for the detection of dichloromethane with high sensitivity

A sensor with high sensitivity and response rate is still lacking in the detection of poisonous and volatile chemicals. Here, we report a highly sensitive nanoporous fluorescence sensor based on core@shell upconversion nanoparticles (UCNPs) for the detection of dichloromethane. UCNPs were deposited on porous anodic alumina oxide (AAO) templates supported by glass slides to form a thin film-like gas sensor in which UCNPs with active shells exhibit intense background-free fluorescence and simultaneously high optical sensitivity, while an AAO template acts as a porous substrate for UCNPs to increase the absorption capacity for molecules to be tested. A detection limit of 2.91 ppm was obtained for dichloromethane based on this sensor at room temperature. The involved response mechanism was attributed to lowered surface fluorescence quenching and scattering of UCNPs by dichloromethane.

A highly sensitive and selective colorimetric probe based on a cycloruthenated complex: an Hg2+-promoted switch of thiophene coordination

A cyclometalated ruthenium complex [Ru(pthb)(bpy)2]+ (1, bpy = 2,2'-bipyridine, Hpthb = 3,3-dimethyl-2-(5-pyridylthiophen-2-yl)vinyl-benzo[e]indolium-1-propylsulfonate) could be converted from a C-coordinated structure to non-metallated species with N,S-bonded Hpthb upon treatment with mercury(ii) ions in water. Strikingly, the switch in the coordination mode resulted in a great absorption change along with a change in the solution color of 1 from dark red to light yellow. Therefore, 1 can be used as a colorimetric probe to detect mercury(ii) ions by the naked eye. Although the emission was not observed for 1 in water, it still demonstrated an appreciably low detection limit of 21 nM by using UV-Vis absorption spectroscopy, which was comparable with those of some probes determined by ratiometric fluorescence spectroscopy.

Fluorometric determination of lead(II) by using aptamer-functionalized upconversion nanoparticles and magnetite-modified gold nanoparticles

A fluorescent nanoprobe for Pb(II) has been developed by employing aptamer-functionalized upconversion nanoparticles (UCNPs) and magnetic Fe₃O₄-modified (MNPs) gold nanoparticles (GNPs). First, aptamer-functionalized UCNPs and aptamer-functionalized magnetic GNPs were synthesized to obtained the fluorescent nanoprobe. The particles were combined by adding a complementary ssDNA. In the absence of Pb(II), the UCNPs, MNPs and GNPs are linked via complementary base pairing. This led to a decrease in the green upconversion fluorescence peaking at 547 nm (under 980 nm excitation). In the presence of Pb(II), the dsDNA between UCNPs and MNPs-GNPs is cleaved, and fluorescence recovers. This effect allows Pb(II) to be quantified, with a wide working range of 25-1400 nM and a lower detection limit of 5.7 nM. The nanoprobe gave satisfactory results when analyzing Pb(II) in tea and waste water. Graphical abstractSchematic representation of fluorescent nanoprobe based on fluorescence resonance energy transfer (FRET) between upconversion nanoparticles (UCNPs) and gold nanoparticles (GNPs)-Fe₃O₄ magnetic nanoparticles (MNPs) for detection of Pb²⁺.

Rhodamine B derivative-modified up-conversion nanoparticle probes based on fluorescence resonance energy transfer (FRET) for the solid-based detection of copper ions

Herein, a novel solid-based up-conversion fluorescence resonance energy transfer (FRET) sensor was developed using rhodamine B hydrazide, which provided a selective fluorescence response and suitable affinity towards Cu²⁺ ions over other biologically relevant metal ions because the Cu²⁺ ion could promote the hydrolysis of α-amino acid esters of rhodamine B hydrazide and yield the Cu·α-amino acid chelate. This solid-based detection system is more convenient for the detection of Cu²⁺ based on color change and emission spectra instead of the complicated and tedious measurements than other up-conversion sensors and up-conversion luminescent nanoparticles used as an excitation source; moreover, the proposed system shows high selectivity, minimum photo-damage to living organisms, and high chemical stability.

Surface Modifications for Photon-Upconversion-Based Energy-Transfer Nanoprobes

An emerging class of inorganic optical reporters are near-infrared (NIR) excitable lanthanide-based upconversion nanoparticles (UCNPs) with multicolor emission and long luminescence lifetimes in the range of several hundred microseconds. For the design of chemical sensors and optical probes that reveal analyte-specific changes in their spectroscopic properties, these nanomaterials must be combined with sensitive indicator dyes that change their absorption and/or fluorescence properties selectively upon interaction with their target analyte, utilizing either resonance energy transfer (RET) processes or reabsorption-related inner filter effects. The rational development of UCNP-based nanoprobes for chemical sensing and imaging in a biological environment requires reliable methods for the surface functionalization of UCNPs, the analysis and quantification of surface groups, a high colloidal stability of UCNPs in aqueous media as well as the chemically stable attachment of the indicator molecules, and suitable instrumentation for the spectroscopic characterization of the energy-transfer systems and the derived nanosensors. These topics are highlighted in the following feature article, and examples of functionalized core-shell nanoprobes for the sensing of different biologically relevant analytes in aqueous environments will be presented. Special emphasis is placed on the intracellular sensing of pH.

Dye-sensitized upconversion nanocomposites for ratiometric semi-quantitative detection of hypochlorite in vivo

Ratiometric fluorescent sensors, which can provide a built-in correction for environmental effects, have attracted significant attention for analytical sensing and optical imaging with the potential to provide a precise and quantitative analysis. Herein, we report a strategy based on dye-sensitized upconversion for the design of dual-excitation upconverion ratiometric probes possessing same emission peaks under a large separation in the excitation spectra (980 nm and 808 nm). Specifically, effective enhancement of upconversion luminescence could be attributed to Cy787 dyes present on the surface of nanoparticles, and it subsequently decreased upon the addition of ClO- under an 808 nm irradiation, whereas the signal under 980 nm excitation remained essentially constant, thus allowing for quantitative ratiometric monitoring of ClO-. The rationally designed dye-sensitized upconverion nanosystem exhibits excellent sensitivity for ClO- with a quantification limit of 3.6 nM in aqueous solutions. We have also demonstrated that the designed nanoprobe is a promising material for semi-quantitative detection of ClO- in an arthritis mouse model.

Recent Advances on Functionalized Upconversion Nanoparticles for Detection of Small Molecules and Ions in Biosystems

Significant progress on upconversion-nanoparticle (UCNP)-based probes is witnessed in recent years. Compared with traditional fluorescent probes (e.g., organic dyes, metal complexes, or inorganic quantum dots), UCNPs have many advantages such as non-autofluorescence, high chemical stability, large light-penetration depth, long lifetime, and less damage to samples. This article focuses on recent achievements in the usage of lanthanide-doped UCNPs as efficient probes for biodetection since 2014. The mechanisms of upconversion as well as the luminescence resonance energy transfer process is introduced first, followed by a detailed summary on the recent researches of UCNP-based biodetections including the detection of inorganic ions, gas molecules, reactive oxygen species, and thiols and hydrogen sulfide.

Radial Flow Assay Using Gold Nanoparticles and Rolling Circle Amplification to Detect Mercuric Ions

A novel colorimetric assay employing oligonucleotide-conjugated gold nanoparticle (AuNP probes) and rolling circle amplification (RCA) was developed for simple detection of mercuric ions (Hg²⁺). The thymine-Hg²⁺-thymine (T-Hg²⁺-T) coordination chemistry makes our detection system selective for Hg²⁺. In the presence of Hg²⁺, the thymine 12-mer oligonucleotide is unable to act as a primer for RCA due to the formation of T-Hg²⁺-T before the RCA reaction. However, in the absence of Hg²⁺, DNA coils as RCA products are generated during the RCA reaction, and is further labeled with AuNP probes. Colorimetric signals that depend on the amount of DNA coil-AuNP probe complexes were generated by drop-drying the reaction solution on nitrocellulose-based paper. As the reaction solution spread radially because of capillary action, the complexes formed a concentric red spot on the paper. The colorimetric signals of the red spots were rapidly measured with a portable spectrophotometer and determined as the ΔE value, which indicates the calculated color intensity. Our assay displays great linearity (detection limit: 22.4 nM), precision, and reproducibility, thus demonstrating its utility for Hg²⁺ quantification in real samples. We suggest that our simple, portable, and cost-effective method could be used for on-site Hg²⁺ detections.

Rational design of fluorescent probe for Hg2+ by changing the chemical bond type

Two kinds of fluorescent probes DFBT and DFABT, and their corresponding water-soluble compounds WDFBT and WDFABT, based on the trimers containing a benzo[2,1,3]thiadiazole moiety and two fluorene moieties are synthesized. Their luminescent behavior towards Hg²⁺ ions and other various metal ions in organic and water solutions are studied in detail via absorption and emission spectroscopy. All these probes show a selective “on–off-type” fluorescent response to Hg²⁺ ions in solution over other metal ions with a maximum detection limit of 10⁻⁷ M. Importantly, the probe type can be changed from irreversible to reversible by altering the bridge mode between the functional units from C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C triple bond to C–C single bond. Their detection mechanisms towards Hg²⁺ are studied in detail via mass spectrometry and Job plots, which are attributed to irreversible chemical reaction for DFABT and WDFABT and a reversible coordination reaction for DFBT and WDFBT respectively. Our research results about this kind of organic fluorescent probe provide valuable information to the future design of practical Hg²⁺ fluorescent probes.

Two kinds of fluorescent probes for Hg²⁺ with different detection mechanism have been realized by simply changing the chemical bond.

NIR Ratiometric Luminescence Detection of pH Fluctuation in Living Cells with Hemicyanine Derivative-Assembled Upconversion Nanophosphors

It is crucial for cell physiology to keep the homeostasis of pH, and it is highly demanded yet challenging to develop luminescence resonance energy transfer (LRET)-based near-infrared (NIR) ratiometric luminescent sensor for the detection of pH fluctuation with NIR excitation. As promising energy donors for LRET, upconversion nanoparticles (UCNPs) have been widely used to fabricate nanosensors, but the relatively low LRET efficiency limits their application in bioassay. To improve the LRET efficiency, core/shell/shell structured β-NaGdF₄@NaYF₄:Yb,Tm@NaYF₄ UCNPs were prepared and decorated with hemicyanine dyes as an LRET-based NIR ratiometric luminescent pH fluctuation-nanosensor for the first time. The as-developed nanosensor not only exhibits good antidisturbance ability, but it also can reversibly sense pH and linearly sense pH in a range of 6.0-9.0 and 6.8-9.0 from absorption and upconversion emission spectra, respectively. In addition, the nanosensor displays low dark toxicity under physiological temperature, indicating good biocompatibility. Furthermore, live cell imaging results revealed that the sensor can selectively monitor pH fluctuation via ratiometric upconversion luminescence behavior.

The influence of energy migration on luminescence kinetics parameters in upconversion nanoparticles

The mechanism of upconversion at the nanoscale is still under discussion. In this paper, we report on the experimental results of anti-Stokes luminescence kinetics in the upconversion nanoparticles of β-NaYF₄: 20%Yb³⁺; 0.6%Tm³⁺. The parameters of the luminescence kinetics were found to be unambiguously dependent on the number of excitation quanta n, which are necessary for certain transitions between the energy states of thulium ions. The observed correlation has been explained by means of the long-lasting energy migration between the ytterbium ions. The spread in time between the luminescent maxima of the corresponding thulium transitions not only shows the nonlinear character of upconversion, but also reveals the time scale of energy migration as well. From these, we derive that the conventional Förster formalism applied to the estimation of energy transfer efficiency in UCNP-fluorophore pairs can provide misleading results.

Recent Advances in Photoacoustic Imaging for Deep-Tissue Biomedical Applications

Photoacoustic imaging (PAI), a novel imaging modality based on photoacoustic effect, shows great promise in biomedical applications. By converting pulsed laser excitation into ultrasonic emission, PAI combines the advantages of optical imaging and ultrasound imaging, which benefits rich contrast, high resolution and deep tissue penetration. In this paper, we introduced recent advances of contrast agents, applications, and signal enhancement strategies for PAI. The PA contrast agents were categorized by their components, mainly including inorganic and organic PA contrast agents. The applications of PAI were summarized as follows: deep tumor imaging, therapeutic responses monitoring, metabolic imaging, pH detection, enzyme detection, reactive oxygen species (ROS) detection, metal ions detection, and so on. The enhancement strategies of PA signals were highlighted. In the end, we elaborated on the challenges and provided perspectives of PAI for deep-tissue biomedical applications.

Current Advances in Lanthanide-Doped Upconversion Nanostructures for Detection and Bioapplication

Along with the development of science and technology, lanthanide-doped upconversion nanostructures as a new type of materials have taken their place in the field of nanomaterials. Upconversion luminescence is a nonlinear optical phenomenon, which absorbs two or more photons and emits one photon. Compared with traditional luminescence materials, upconversion nanostructures have many advantages, such as weak background interference, long lifetime, low excitation energy, and strong tissue penetration. These interesting nanostructures can be applied in anticounterfeit, solar cell, detection, bioimaging, therapy, and so on. This review is focused on the current advances in lanthanide-doped upconversion nanostructures, covering not only basic luminescence mechanism, synthesis, and modification methods but also the design and fabrication of upconversion nanostructures, like core-shell nanoparticles or nanocomposites. At last, this review emphasizes the application of upconversion nanostructure in detection and bioimaging and therapy. Learning more about the advances of upconversion nanostructures can help us better exploit their excellent performance and use them in practice.

Fluorescent nanoprobes for sensing and imaging of metal ions: recent advances and future perspectives

Recent advances in nanoscale science and technology have generated nanomaterials with unique optical properties. Over the past decade, numerous fluorescent nanoprobes have been developed for highly sensitive and selective sensing and imaging of metal ions, both in vitro and in vivo. In this review, we provide an overview of the recent development of the design and optical properties of the different classes of fluorescent nanoprobes based on noble metal nanomaterials, upconversion nanoparticles, semiconductor quantum dots, and carbon-based nanomaterials. We further detail their application in the detection and quantification of metal ions for environmental monitoring, food safety, medical diagnostics, as well as their use in biomedical imaging in living cells and animals.

Cycloruthenated complexes: pH-dependent reversible cyclometallation and reactions with nitrite at octahedral ruthenium centers

The pH-dependent reversible cyclometallation and reactions with nitrite in a near-aqueous system of a related set of cyclometallated ruthenium(ii) bipyridyl complexes were investigated in detail. These complexes are [Ru(ppy)(bpy)2]PF6 (, bpy = 2,2'-bipyridine, Hppy = 2-phenylpyridine), [Ru(thpy)(bpy)2]PF6 (, Hthpy = 2-(2-thienyl)pyridine), and [Ru(dfppy)(bpy)2]PF6 (, Hdfppy = 2-(2,4-difluorophenyl)pyridine). As expected, reversible UV-Vis spectra of these three complexes in near-aqueous solutions can be achieved by treating with acid or base, which indicates a pH-dependent reversible cyclometallation. However, the addition of nitrite to acidic solutions of these complexes disturbed the reversible pH-dependent processes. Unexpected ruthenium complexes in the aforementioned system were then isolated and characterized using FT-IR, MS, (1)H NMR, and UV-Vis spectra, indicating that two reaction modes occurred at the ruthenium(ii) centers: (1) the insertion of NO into the ruthenium-aryl bond to form a ruthenium C-nitroso complex; and (2) the coordination of NO with the entire dissociation of one bipyridine to form a {Ru-NO}(6) complex, which is the first example involving the cleavage of Ru-N(∧)N bonds in ruthenium bipyridyl complexes.

Facile fabrication of an electrochemical aptasensor based on magnetic electrode by using streptavidin modified magnetic beads for sensitive and specific detection of Hg(2.)

In this work, a novel electrochemical aptasensor was developed for sensitive and specific detection of Hg(2+) based on thymine-Hg(2+)-thymine (T-Hg(2+)-T) structure via application of thionine (Th) as indicator signal. For the fabrication of the aptasensor, streptavidin modified magnetic beads (Fe3O4-SA) was firmly immobilized onto the magnetic glassy carbon electrode (MGCE) benefited from its magnetic character. Then biotin labeled T-riched single stranded DNA (Bio-ssDNA) connected with Fe3O4-SA specifically and steadily because of the specific binding capacity between streptavidin and biotin. The stable structure of T-Hg(2+)-T formed in the present of Hg(2+) provided convenience for the intercalation of Th. The detection of Hg(2+) was achieved by recording the differential pulse voltammetry (DPV) signal of Th. Under optimal experimental conditions, the linear range of the fabricated electrochemical aptasensor was 1-200nmol/L, with a detection limit of 0.33nmol/L. Furthermore, the proposed aptasensor may find a potential application for the detection of Hg(2+) in real water sample analysis.

Bioapplications and biotechnologies of upconversion nanoparticle-based nanosensors

Upconversion nanoparticles (UCNPs), which can emit ultraviolet/visible (UV/Vis) light under near-infrared (NIR) excitation, are regarded as a new generation of nanoprobes because of their unique optical properties, including a virtually zero auto-fluorescence background for the improved signal-to-noise ratio, narrow emission bandwidths and high resistance to photo-bleaching.

Fluorescence turn-on detection of mercury ions based on the controlled adsorption of a perylene probe onto the gold nanoparticles

A novel fluorescence turn-on strategy based on Au nanoparticles and a perylene probe for the sensing of Hg(2+) ions has been developed. It was observed that a perylene probe could be adsorbed onto the surface of Au NPs through strong electrostatic and hydrophobic interactions. Its fluorescence was efficiently quenched by the Au nanoparticles. However, in the presence of Hg(2+) and NaBH4, Hg(2+) was reduced and an Au/Hg amalgam was formed on the surface of the Au nanoparticles. The perylene probe could hardly be adsorbed and quenched by the Au/Hg amalgam. A turn on fluorescence signal was therefore detected. The assay is quite sensitive, and 5 nM Hg(2+) could be easily detected. It is also very selective, a number of metal ions were tested and no noticeable interference was observed. The assay was also successfully applied for the determination of Hg(2+) in lake water samples. A simple, fast, inexpensive, highly sensitive and selective Hg(2+) sensing strategy is therefore established.

Ratiometric fluorescent nanosensors for selective detecting cysteine with upconversion luminescence

Fluorescent sensors based on upconversion (UC) luminescence have been considered as a promising strategy to detect bio-analyte due to their advantages in deep penetration, minimum autofluorescence, and ratiometric fluorescent output. A prototype of nanosensors combined with mesoporous silica coated upconversion nanoparticles (UCNPs) and a fluorescein-based fluorescent probe loaded in pores was therefore designed to detect cysteine (Cys). The silica shell provided loading space for the probe and enabled the nanosensors to disperse in water. In the presence of Cys, the fluorescent probe was transformed into 5(6)-carboxyfluorescein with an emission band centering at 518 nm which was secondarily excited by the light at around 475 nm from NaYF4:Yb(3+), Tm(3+) UCNPs driven by 980 nm near-infrared (NIR) laser. The intensity ratio between green and blue luminescence (I518/I475) grew exponentially with increasing concentrations of Cys over a range of 20-200 μmolL(-1). The response of the nanosensors towards Cys was recognizable with naked eyes by luminescence color change. Evidences suggest that these nanosensors are capable of sensing Cys in aqueous solution and distinguishing Cys from homocysteine (Hcy) with kinetically-controlled selectivity. The system was further employed to detect Cys in human serum and the result was in agreement with it tested by high performance liquid chromatography with acceptable recovery.

Simultaneous realization of Hg(2+) sensing, magnetic resonance imaging and upconversion luminescence in vitro and in vivo bioimaging based on hollow mesoporous silica coated UCNPs and ruthenium complex

We have constructed a multifunctional nanoprobe with sensing and imaging properties by using hollow mesoporous silica coated upconversion nanoparticles (UCNPs) and Hg(2+) responsive ruthenium (Ru) complex. The Ru complex was loaded into the hollow mesoporous silica and the UCNPs acted as an energy donor, transferring luminescence energy to the Ru complex. Furthermore, polyethylenimine (PEI) was assembled on the surface of mesoporous silica to achieve better hydrophilic and bio-compatibility. Upon addition of Hg(2+), a blue shift of the absorption peak of the Ru complex is observed and the energy transfer process between the UCNPs and the Ru complex was blocked, resulting in an increase of the green emission intensity of the UCNPs. The un-changed 801 nm emission of the nanoprobe was used as an internal standard reference and the detection limit of Hg(2+) was determined to be 0.16 μM for this nanoprobe in aqueous solution. In addition, based on the low cytotoxicity as studied by CCK-8 assay, the nanoprobe was successfully applied for cell imaging and small animal imaging. Furthermore, when doped with Gd(3+) ions, the nanoprobe was successfully applied to in vivo magnetic resonance imaging (MRI) of Kunming mice, which demonstrates its potential as a MRI positive-contrast agent. Therefore, the method and results may provide more exciting opportunities to afford nanoprobes with multimodal bioimaging and multifunctional applications.

Chemical sensing and imaging based on photon upconverting nano- and microcrystals: a review

The demand for photostable luminescent reporters that absorb and emit light in the red to near-infrared (NIR) spectral region continues in biomedical research and bioanalysis. In recent years, classical organic fluorophores have increasingly been displaced by luminescent nanoparticles. These consist of either polymer or silica based beads that are loaded with luminescent dyes, conjugated polymers, or inorganic nanomaterials such as semiconductor nanocrystals (quantum dots), colloidal clusters of silver and gold, or carbon dots. Among the inorganic materials, photon upconversion nanocrystals exhibit a high potential for application to bioimaging or biomolecular assays. They offer an exceptionally high photostability, can be excited in the NIR, and their anti-Stokes emission enables luminescence detection free of background and perturbing scatter effects even in complex biological samples. These lanthanide doped inorganic crystals have multiple emission lines that can be tuned by the selection of the dopants.This review article is focused on the applications of functionalized photon upconversion nanoparticles (UCNPs) to chemical sensing. This is a comparatively new field of research activity and mainly directed at the sensing and imaging of ubiquitous chemical analytes in biological samples, particularly in living cells. For this purpose, the particles have to be functionalized with suitable indicator dyes or recognition elements, as they do not show an intrinsic or specific luminescence response to most of these analytes (e.g. pH, oxygen, metal ions). We describe the strategies for the design of such responsive nanocomposites utilizing either luminescence resonance energy transfer or emission-reabsorption (inner filter effect) mechanisms and also highlight examples for their use either immobilized in sensor layers or directly as nanoprobes for intracellular sensing and imaging.

Rare Earth Ion-Doped Upconversion Nanocrystals: Synthesis and Surface Modification

The unique luminescent properties exhibited by rare earth ion-doped upconversion nanocrystals (UCNPs), such as long lifetime, narrow emission line, high color purity, and high resistance to photobleaching, have made them widely used in many areas, including but not limited to high-resolution displays, new-generation information technology, optical communication, bioimaging, and therapy. However, the inherent upconversion luminescent properties of UCNPs are influenced by various parameters, including the size, shape, crystal structure, and chemical composition of the UCNPs, and even the chosen synthesis process and the surfactant molecules used. This review will provide a complete summary on the synthesis methods and the surface modification strategies of UCNPs reported so far. Firstly, we summarize the synthesis methodologies developed in the past decades, such as thermal decomposition, thermal coprecipitation, hydro/solvothermal, sol-gel, combustion, and microwave synthesis. In the second part, five main streams of surface modification strategies for converting hydrophobic UCNPs into hydrophilic ones are elaborated. Finally, we consider the likely directions of the future development and challenges of the synthesis and surface modification, such as the large-scale production and actual applications, stability, and so on, of the UCNPs.

An upconversion nanocomposite for fluorescence resonance energy transfer based cholesterol-sensing in human serum

Upconversion nanophosphors (UCNPs) are extremely useful for analytical applications, since they display a high signal-to-noise ratio, and their photobleaching can be ignored. Herein, a novel upconversion nanocomposite composed of β-cyclodextrin (β-CD) derivative modified UCNPs and rhodamine B (RB) was prepared for the detection of cholesterol (Cho). The upconversion luminescence (UCL) emission can serve as a Cho-sensing signal by an effective fluorescence resonance energy transfer (FRET) process, using UCNPs as the donor and RB as the quencher. The sensor for Cho detection in human serum shows excellent sensitivity and selectivity, which has the potential for clinical applications in the analysis of other biological and environmental samples.

Upconversion nanoparticles: from hydrophobic to hydrophilic surfaces

CONSPECTUS: Photon upconversion nanoparticles (UCNPs) have emerged as a promising new class of nanomaterials due to their ability to convert near-IR light into visible luminescence. Unfortunately, most efficient methods for preparing UCNPs yield hydrophobic materials, but water-dispersibility is needed in the major fields of applications of UCNPs, that is, in bioimaging, labeling, and bioassays. Numerous methods therefore have been reported in the past years to convert the hydrophobic surface of UCNPs to a more hydrophilic one so to render them dispersible in aqueous systems. We present a classification respective for these strategies and assess the main methods. These include (A) chemical modification of the hydrophobic (typically oleate) ligand on the surface, (B) addition of an extra layer, (C) addition of a thin shell on top of the UCNP, and (D) complete replacement of the original ligand by another one. Chemical modification (A) involves oxidation of the oleate or oleylamine and leads to particles with terminal oxygen functions. This method is less often used because solutions of the resulting UCNPs in water have limited colloidal stability, protocols are time-consuming and often give low yields, and only a limited number of functional groups can be introduced. Methods B and C involve coating of UCNPs with amphiphiles or with shells made from silica oxide, titanium oxide, or metallic gold or silver. These methods are quite versatile in terms of further modifications, for example, by further cross-linking or by applying thiol-gold chemistry. Growing an extra shell is, however, often accompanied by a higher polydispersity. Method D can be divided into subgroups based on either (i) the direct (single-step) replacement of the native ligand by a new ligand or (ii) two-step protocols using nitrosyltetrafluoroborate (NOBF4) or strong acids as reagents to produce ligand-free UCNPs prior to the attachment of a new ligand. These methods are simple and versatile, and the distance between the new ligand and the luminescent particle can be well controlled. However, the particles often have limited stability in buffer systems. The methods described also are of wider interest because they are likely to be applicable to other kinds of nanomaterials. We additionally address the need for (a) a better control of particle size and homogeneity during synthesis, (b) more reproducible methods for surface loading and modification, (c) synthetic methods giving higher yields of UCNPs, (d) materials displaying higher quantum yields in water solution without the need for tedious surface modifications, (e) improved methods for workup (including the suppression of aggregation), (f) new methods for surface characterization, and (g) more affordable reagents for use in surface modification. It is noted that most synthetic research in the area is of the trial-and-error kind, presumably due to the lack of understanding of the mechanisms causing current limitations. Finally, all particles are discussed in terms of their biocompatibility (as far as data are available), which is quintessential in terms of imaging, the largest field of application.