Poly(2-ethyl-2-oxazoline-co-ethyleneimine)-block-poly(ε-caprolactone) based micelles: synthesis, characterization, peptide conjugation and cytotoxic activity

Here we present self-assembled polymeric micelles as potential delivery systems for therapeutic agents with highly tunable properties.

Colloidal Behavior of Cellulose Nanocrystals Grafted with Poly(2-alkyl-2-oxazoline)s

Polymer grafting onto cellulose nanocrystals (CNCs) has been used as a tool to improve CNC dispersion in nonpolar solvents or polymeric matrixes. The grafting of flexible polymer chains onto rigid particle surfaces leads to significant modifications in colloidal behavior. Here, poly(2-alkyl-2-oxazoline)s of well-defined molar mass and narrow molar mass distribution were synthesized by cationic ring-opening polymerization and grafted onto CNC surfaces, where the coupling reaction was favored when partially hydrolyzed polymers were used (reaching 64% reaction yield). The particles grafted with polymer chains could be redispersed in water after freeze-drying, producing stable dispersions, and they were not cell-toxic up to 10 wt % aqueous dispersion. Colloidal stability, nanostructure organization, and rheological behavior of grafted CNC and CNC-grafted CNC mixtures were evaluated. The rheological behavior of grafted nanoparticles, meanwhile, showed new features when compared to original CNC dispersions. Aqueous CNC dispersions showed a liquid crystal nematic organization and rheological behavior characteristic of true gel (at 5 wt %) prior to drying. On the other hand, nanoparticle dispersions behaved as weak gels upon the addition of 10 wt % of CNC-g-(PEtOx95-s-Ei5) under the same conditions. Dispersions of CNC-g-P(PEtOx-s-Ei) particles obtained by redispersion of freeze-dried particles behaved as a fluid, without the presence of the nematic organization. Through oscillatory rheology and time-domain NMR results, it can be concluded that polymer-water interactions are dominant over CNC-water interactions, being responsible for CNC nematic phase disruption. By introducing polymer chains, the introduction of isotropic character modifies water organization, changing the flow behavior of CNC-grafted with poly(oxazoline)s.

Trends in polymeric shape memory hydrogels and hydrogel actuators

Recently, “smart” hydrogels with either shape memory behavior or reversible actuation have received particular attention and have been further developed into sensors, actuators, or artificial muscles.

Full and partial hydrolysis of poly(2-oxazoline)s and the subsequent post-polymerization modification of the resulting polyethylenimine (co)polymers

This review discusses the full and partial hydrolysis of poly(2-oxazoline)s as well as the synthetic methods that have been reported to modify the resulting secondary amine groups.

Healable Antifouling Films Composed of Partially Hydrolyzed Poly(2-ethyl-2-oxazoline) and Poly(acrylic acid)

Antifouling polymeric films can prevent undesirable adhesion of bacteria but are prone to accidental scratches, leading to a loss of their antifouling functions. To solve this problem, we report the fabrication of healable antifouling polymeric films by layer-by-layer assembly of partially hydrolyzed poly(2-ethyl-2-oxazoline) (PEtOx-EI-7%) and poly(acrylic acid) (PAA) based on hydrogen-bonding interaction as the driving force. The thermally cross-linked (PAA/PEtOx-EI-7%)*100 films show strong resistance to adhesion of both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis bacteria due to the high surface and bulk concentration of the antifouling polymer PEtOx-EI-7%. Meanwhile, the dynamic nature of the hydrogen-bonding interactions and the high mobility of the polymers in the presence of water enable repeated healing of cuts of several tens of micrometers wide in cross-linked (PAA/PEtOx-EI-7%)*100 films to fully restore their antifouling function.

Amphiphilic gels of solvatochromic fluorescent poly(2-oxazoline)s containing D–π–A pyrenes

We report amphiphilic, fluorescent, solvatochromic poly(2-methyl-2-oxazoline) (POZO-py) and poly(2-ethyl-2-oxazoline) (PEtOZO-py), which contain D–π–A pyrene dye units in their side chains.

Tailored and biodegradable poly(2-oxazoline) microbeads as 3D matrices for stem cell culture in regenerative therapies

We present the synthesis of hydrogel microbeads based on telechelic poly(2-oxazoline) (POx) crosslinkers and the methacrylate monomers (HEMA, METAC, SPMA) by inverse emulsion polymerization. While in batch experiments only irregular and ill-defined beads were obtained, the preparation in a microfluidic (MF) device resulted in highly defined hydrogel microbeads. Variation of the MF parameters allowed to control the microbead diameter from 50 to 500 μm. Microbead elasticity could be tuned from 2 to 20 kPa by the POx:monomer composition, the POx chain length, net charge of the hydrogel introduced via the monomer as well as by the organic content of the aqueous phase. The proliferations of human mesenchymal stem cells (hMSCs) on the microbeads were studied. While neutral, hydrophilic POx-PHEMA beads were bioinert, excessive colonization of hMSCs on charged POx-PMETAC and POx-PSPMA was observed. The number of proliferated cells scaled roughly linear with the METAC or SPMA comonomer content. Additional collagen I coating further improved the stem cell proliferation. Finally, a first POx-based system for the preparation of biodegradable hydrogel microcarriers is described and evaluated for stem cell culturing.

Trigger chemistries for better industrial formulations

In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

Structural investigation of thermo-responsive poly(2-isopropyl-2-oxazoline) hydrogel across the volume phase transition

The deswelling and swelling behaviors of poly(2-isopropyl-2-oxazoline)-based hydrogel synthesized by a one-pot microwave-assisted solvent-free reaction were investigated. A distinct hydrophobic collapse of the hydrogel compared with the corresponding aqueous solution was observed by FT-IR spectroscopy combined with two-dimensional correlation spectroscopy (2DCOS) and perturbation-correlation moving-window (PCMW) analyses. The volume phase transition (VPT) temperature of 35 °C during heating and the transition temperature range of 41-30 °C during cooling were determined, indicating different dynamic transition mechanisms during heating and cooling. Water expulsion starting from the benzene ring-centered hydrophobic spots to the surroundings was revealed during deswelling. However, during swelling, although the rebuilding of cross-linking hydrogen bond bridges provided a channel-like microstructure to reswell the hydrogel gradually, a slow, unusual recovery of the amide hydrogen bonds to water molecules was observed.

Oxidation- and thermo-responsive poly(N-isopropylacrylamide-co-2-hydroxyethyl acrylate) hydrogels cross-linked via diselenides for controlled drug delivery

A novel diselenide crosslinked poly(NIPAM-co-HEA) hydrogel was successfully synthesized, which exhibits a dual-stimuli-responsive drug release behaviors,i.e., thermo-induced slow sustained release and oxidation-induced quick burst release.

Core cross-linked nanogels based on the self-assembly of double hydrophilic poly(2-oxazoline) block copolymers

The synthesis of poly(2-oxazoline)-based block copolymers consisting of a cationic and a hydrophilic segment is described.

Covalently cross-linked poly(2-oxazoline) materials for biomedical applications – from hydrogels to self-assembled and templated structures

We discuss covalently cross-linked poly(2-oxazoline)s including gels, nanogels and capsules on the basis of their synthetic origin in a biomedical context.

Poly(N-vinylcaprolactam): a thermoresponsive macromolecule with promising future in biomedical field

Poly(N-vinylcaprolactam) (PNVCL) is a thermoresponsive and biocompatible polymer that raises an increasing interest in the biomedical area, especially in drug delivery systems (DDS) that include micelles, hydrogels, and hybrid particles. The thermoresponsiveness of PNVCL, used alone or in combination with other stimuli- responsive polymers or particles (pH, magnetic field, or chemicals), is often key in the loading and/or release process in these DDS. The renewed focus on this polymer, which is known for decades, is to a large extent due to recent progress in synthetic strategies. Especially, the advent of efficient controlled radical polymerization (CRP) methods for NVCL monomer gives now access to unprecedented well-defined NVCL-based copolymers with unique properties. This Review article addresses up-to-date synthetic aspects, biological features, and biomedical applications of the latest NVCL-containing systems.

Poly(2-oxazoline)-based nanogels as biocompatible pseudopolypeptide nanoparticles

Hydrophilic nanogels based on partially hydrolyzed poly(2-ethyl-2-oxazoline) were synthesized in dilute aqueous media in the presence of 1,6-hexanediol diglycidyl ether as a cross-linker. Nanogel formation was monitored by DLS and HSQC NMR spectroscopy, and the final nano-objects were characterized by DLS, TEM, AFM, and NanoSight analyses. Nanogels with a hydrodynamic radius of 78 nm exhibiting a slight positive surface charge were obtained. MTS assays (cell metabolic activity test) evidenced that nanogels were nontoxic in the investigated concentration range (i.e., 0.1 to 400 μg/mL) and that no specific interaction with bovine serum albumin was observed.

Trigger-Responsive Poly(β-amino ester) Hydrogels

Water-soluble, acrylate-terminated poly(β-amino esters) with built-in trigger-responsive domains were synthesized through Michael addition of trigger-responsive diacrylates and primary amines. They were used as macromolecular precursors for photoinitiated cross-linking reactions to prepare trigger-responsive hydrogels for protein encapsulation. The encapsulated proteins could be rapidly released upon external triggering.

Living cationic ring-opening polymerization of 2-oxazolines initiated by rare-earth metal triflates

Lewis acidic rare-earth metal triflates were found to efficiently initiate the cationic ring-opening polymerization of 2-oxazolines in a multi-site propagating fashion.

Fast and accurate partial hydrolysis of poly(2-ethyl-2-oxazoline) into tailored linear polyethylenimine copolymers

This work reports on defining optimal conditions to achieve tailored P(EtOx-co-EI) copolymers in a fast and reproducible way, utilizing high temperatures and controlled acidic conditions.

Thermo-responsive gold/poly(vinyl alcohol)-b-poly(N-vinylcaprolactam) core–corona nanoparticles as a drug delivery system

Preparation of thermo-responsive poly(vinyl alcohol)-b-poly(N-vinylcaprolactam) copolymer-stabilized gold nanoparticles for drug delivery.