Exploring the anti-aging effect of dextran and polyethylene glycol-coated cerium oxide nanoparticles in erythrocytes

Oxidative stress generated during aging largely affects erythrocytes. Antioxidative therapies such as polyphenols and flavonoids face limitations like low bioavailability and reduced efficiency. Cerium oxide nanoparticles (CeONPs) can behave as antioxidative enzymes and thus have better efficiency. Additionally, biopolymer coatings such as polyethylene glycol and polysaccharides such as dextran enhance the biocompatibility of these NPs. Therefore, we synthesized and characterized bare, polyethylene glycol, dextran-coated CeONPs and examined their hemocompatibility and protective effect against age-induced oxidative stress in erythrocytes. Erythrocytes were obtained from 5 ml of fresh blood drawn from 52 healthy individuals aged 20-85 years with their consent. CeONPs were found to be protective against age-induced oxidative damage in erythrocytes such as reduced levels of antioxidants and increased levels of oxidative species. Pretreatment with NPs protected the morphology and membrane integrity of erythrocytes. Among the NPs investigated, dextran-coated CeONPs emerged as the most effective, providing a reassuring sign of progress in anti-aging research. Therefore, Dex-CeONPs can be used as potential antioxidant therapeutics against age-induced oxidative stress.

Two decades of ceria nanoparticle research: structure, properties and emerging applications

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Resolving a structural issue in cerium-nickel-based oxide: a single compound or a two-phase system?

CeNiO3 has been reported in the literature in the last few years as a novel LnNiO3 compound with promising applications in different catalytic fields, but its structure has not been correctly reported so far. In this research, CeNiO3 (RB1), CeO2 and NiO have been synthesized in a nanocrystalline form using a modified citrate aqueous sol-gel route. A direct comparison between the equimolar physical mixture (n(CeO2) : n(NiO) = 1 : 1) and compound RB1 was made. Their structural differences were investigated by laboratory powder X-ray diffraction (PXRD), selected area electron diffraction (SAED), transmission electron microscopy (TEM) with an energy-dispersive X-ray spectroscopy (EDS) detector, and Raman spectroscopy. The surface of the compounds was analyzed by X-ray photoelectron spectroscopy (XPS), while the thermal behaviour was explored by thermogravimetric analysis (TGA). Their magnetic properties were also investigated with the aim of exploring the differences between these two compounds. There were clear differences between the physical mixture of CeO2 + NiO and RB1 presented by all of these employed methods. Synchrotron methods, such as atomic pair distribution function analysis (PDF), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), were used to explore the structure of RB1 in more detail. Three different models for the structural solution of RB1 were proposed. One structural solution proposes that RB1 is a single-phase pyrochlore compound (Ce2Ni2O7) while the other two solutions suggest that RB1 is a two-phase system of either CeO2 + NiO or Ce1-xNixO2 and NiO.

Multicomponent X-ray Shielding Using Sulfated Cerium Oxide and Bismuth Halide Composites

Lead is the most widely used X-ray-shielding material, but it is heavy (density ≈ 11.34 g/cm3) and toxic. Therefore, the replacement of Pb with lightweight, ecofriendly materials would be beneficial, and such materials would have applications in medicine, electronics, and aerospace engineering. However, the shielding ability of Pb-free materials is significantly lower than that of Pb itself. To maximize the radiation attenuation of non-Pb-based shielding materials, a high-attenuation cross-section, normal to the incoming X-ray direction, must be achieved. In this study, we developed efficient X-ray-shielding materials composed of sulfated cerium oxide (S-CeO2) and bismuth halides. Crucially, the materials are lightweight and mechanically flexible because of the absence of heavy metals (for example, Pb and W). Further, by pre-forming the doped metal oxide as a porous sponge matrix, and then incorporating the bismuth halides into the porous matrix, uniform, compact, and intimate composites with a high-attenuation cross-section were achieved. Owing to the synergetic effect of the doped metal oxide and bismuth halides, the resultant thin (approximately 3 mm) and lightweight (0.85 g·cm-3) composite achieved an excellent X-ray-shielding rate of approximately 92% at 60 kV, one of the highest values reported for non-heavy-metal shielding materials.

Electro-oxidation Reaction of Methanol over Reducible Ce1-x-yNixSryO2-δ: A Mechanistic Probe of Participation of Lattice Oxygen

Methanol oxidation reaction crucially depends on the formation of -OOH species over the catalyst's surface. Ni-based catalysts are by far the choice of materials, where the redox couple of Ni²⁺/Ni³⁺ facilitates the formation of -OOH species by surface reconstructions. However, it is challenging to oxidize Ni²⁺ as it generates charge-transfer orbitals near the Fermi energy level. One possible solution is to substitute Ni²⁺ with a reducible oxide support, which will not only facilitate the Ni²⁺ → Ni³⁺ oxidation but also adsorb oxygenated species like -OOH at a lower potential owing to its oxophilicity. This work shows with the help of structural and surface studies that the reducible CeO₂ support in Ni and Sr co-doped Ce_1-x-yNi_xSr_yO_2-δ solid solution can easily facilitate Ni²⁺ → Ni³⁺ oxidation as well as evolution of lattice oxygen during the methanol oxidation reaction. While the Ni³⁺ species helped in formation of -OOH surface intermediates, the evolved lattice oxygen eased the CO oxidation process in order to bring out the better CO-tolerant methanol oxidation activity over Ce_1-x-yNi_xSr_yO_2-δ. The study shows the unique importance of the electronic interactions between the active site and support and involvement of lattice oxygen in the methanol oxidation reaction.

A Review on the Different Aspects and Challenges of the Dry Reforming of Methane (DRM) Reaction

The dry reforming of methane (DRM) reaction is among the most popular catalytic reactions for the production of syngas (H2/CO) with a H2:CO ratio favorable for the Fischer-Tropsch reaction; this makes the DRM reaction important from an industrial perspective, as unlimited possibilities for production of valuable products are presented by the FT process. At the same time, simultaneously tackling two major contributors to the greenhouse effect (CH4 and CO2) is an additional contribution of the DRM reaction. The main players in the DRM arena-Ni-supported catalysts-suffer from both coking and sintering, while the activation of the two reactants (CO2 and CH4) through different approaches merits further exploration, opening new pathways for innovation. In this review, different families of materials are explored and discussed, ranging from metal-supported catalysts, to layered materials, to organic frameworks. DRM catalyst design criteria-such as support basicity and surface area, bimetallic active sites and promoters, and metal-support interaction-are all discussed. To evaluate the reactivity of the surface and understand the energetics of the process, density-functional theory calculations are used as a unique tool.

New bimetallic adsorbent material based on cerium-iron nanoparticles highly selective and affine for arsenic(V)

Bimetallic oxy(hydroxides) have gain great interest in water treatment systems based on adsorption processes. Their high OH groups density, in addition to inheriting the oxides properties make them highly promising adsorbents of anions. In this work, highly affine and selective bimetallic oxyhydroxides of cerium and iron (Ce:Fe-P's) for arsenic(V) were synthesized by implementing an assisted microwave methodology. The Ce:Fe-P's were characterized by various techniques (SEM, FTIR, XRD and XPS) and the As(V) adsorption capacity and kinetics as well as the effect of pH and the presence of coexisting anions were determined. The results showed that Ce:Fe-P's have an outstanding As(V) adsorption capacity (179.8 mg g^-1 at C_e = 3 mg L^-1) even at low concentrations (120 mg g^-1 at C_e = 37 μg L^-1). Moreover, the adsorption equilibrium was reached very fast, just in 3 min, with an adsorption rate of 0.123 mg min^-1, that is, 80% of the initial As(V) concentration of 5 mg L^-1 was removed in the first 3 min. The arsenic adsorption capacity decreased only up to 20% at pH above 7, attributed to electrostatic repulsions due to the adsorbent's pH_PZC, which was 6.8. On the other hand, the arsenic adsorption capacity of Ce:Fe-P's decreased just 21% in the presence of 10 mg L^-1 of each of the following competing anions: F^-, Cl^-, SO₄^2-, NO₃^-, PO₄^3- and CO₃^2-, which usually coincide in contaminated water with As(V). Ce:Fe-P's has proven to be one of the most promising As(V) adsorbent materials reported so far in the literature, because it presented an outstanding adsorption capacity and at the same time a very fast adsorption speed. Furthermore, the pH and the concentration of coexisting anions caused little interference in the adsorption processes. Due to the above, the Ce:Fe-P's is already in the process of intellectual protection.

Copper Supported on Ceria Mesocellular Foam Silica as an Effective Catalyst for Reductive Condensation of Acetone to Methyl Isobutyl Ketone

Copper-containing materials based on Ce- and Ca-Nb-mesocellular foam (MCF) silica supports are prepared, characterized and applied as catalysts for gas-phase reductive condensation of acetone to produce methyl isobutyl ketone (MIBK). The properties of the materials, the interaction of metal species, and their role in the catalytic process are examined by nitrogen physisorption, XRD, XPS, CO₂ -TPD, H₂ -TPR, and chemisorption of NO and pyridine combined with FTIR spectroscopy. A synergistic interaction of Cu²⁺ , Cu⁰ , and CeO₂ species incorporated in the MCF support enable the Cu/Ce-MCF catalyst to yield 34 % of acetone conversion with over 90 % MIBK selectivity at 250 °C. Moreover, this high catalyst selectivity is maintained during operation for 24 h despite a decline in catalyst activity. The catalytic performance is superior to that of hydroxyapatite-supported Cu and similar previously reported Pd-containing catalysts.

Redox Active Cerium Oxide Nanoparticles: Current Status and Burning Issues

Research on cerium oxide nanoparticles (nanoceria) has captivated the scientific community due to their unique physical and chemical properties, such as redox activity and oxygen buffering capacity, which made them available for many technical applications, including biomedical applications. The redox mimetic antioxidant properties of nanoceria have been effective in the treatment of many diseases caused by reactive oxygen species (ROS) and reactive nitrogen species. The mechanism of ROS scavenging activity of nanoceria is still elusive, and its redox activity is controversial due to mixed reports in the literature showing pro-oxidant and antioxidant activity. In light of its current research interest, it is critical to understand the behavior of nanoceria in the biological environment and provide answers to some of the critical and open issues. This review critically analyzes the status of research on the application of nanoceria to treat diseases caused by ROS. It reviews the proposed mechanism of action and shows the effect of surface coatings on its redox activity. It also discusses some of the crucial issues in deciphering the mechanism and redox activity of nanoceria and suggests areas of future research.

Adsorption of Carbon Dioxide on Mono-Layer Thick Oxidized Samarium Films on Ni(100)

Studies of adsorption of CO2 on nanoscopic surfaces are relevant for technological applications in heterogeneous catalysis as well as for sorption of this important greenhouse gas. Presently, adsorption of carbon dioxide on pure and oxidized thin samarium layers near mono-layer thickness on Ni(100) has been investigated by photoelectron spectroscopy and temperature programmed desorption. It is observed that very little CO2 adsorb on the metallic sample for exposures in the vacuum regime at room temperature. For the oxidized sample, a large enhancement in CO2 adsorption is observed in the desorption measurements. Indications of carbonate formation on the surface were found by C 1s and O 1s XPS. After annealing of the oxidized samples to 900 K very little CO2 was found to adsorb. Differences in desorption spectra before and after annealing of the oxidized samples are correlated with changes in XPS intensities, and with changes in sample work function which determines the energy difference between molecular orbitals and substrate Fermi level, and thus the probability of charge transfer between adsorbed molecule and substrate.

Chemical Degradation of the La0.6Sr0.4Co0.2Fe0.8O3−δ/Ce0.8Sm0.2O2−δ Interface during Sintering and Cell Operation

A complete cell consisting of NiO-Ce0.8Sm0.2O3−δ//Ce0.8Sm0.2O3−δ//(La0.6Sr0.4)0.95Co0.2Fe0.8O3−δ elaborated by a co-tape casting and co-sintering process and tested in operating fuel cell conditions exhibited a strong degradation in performance over time. Study of the cathode–electrolyte interface after cell testing showed, on one hand, the diffusion of lanthanum from (La0.6Sr0.4)0.95Co0.2Fe0.8O3−δ into Sm-doped ceria leading to a La- and Sm-doped ceria phase. On the other hand, Ce and Sm diffused into the perovskite phase of the cathode. The grain boundaries appear to be the preferred pathways of the cation diffusion. Furthermore, a strontium enrichment was clearly observed both in the (La0.6Sr0.4)0.95Co0.2Fe0.8O3−δ layer and at the interface with electrolyte. X-ray photoelectron spectroscopy (XPS) indicates that this Sr-rich phase corresponded to SrCO3. These different phenomena led to a chemical degradation of materials and interfaces, explaining the decrease in electrochemical performance.

K. Raj KR, Ghodekar MM, Patil VS, Gopinath CS, Raja T. Phase Transfer Ceria-Supported Nanocatalyst for Nitrile Hydration Reaction

The present study elaborates the catalytic effect of rare-earth metal oxides (Sm₂O₃ and La₂O₃) over ceria as a support phase transfer catalyst. The synthesized catalysts have been subjected to different characterization techniques, such as field-emission scanning electron microscopy, high-resolution transmission electron microscopy, powder X-ray diffraction, N₂ adsorption-desorption (BET surface analysis), temperature-programmed desorption study (NH₃/CO₂-TPD), Fourier transform infrared, Raman analysis, and X-ray photoelectron spectroscopy to get better insights into the catalytic activity of the catalysts for hydration of nitrile.

R. B, Unnikrishnan NV, Joseph C. High color rendering index single phase white light emitting phosphors based on Tb3+/Sm3+ co-doped CePO4 nanocrystals: the role of Tb3+ as a bridge between Ce3+ and Sm3+

Single phase white light emitting CePO₄ nanocrystals doped with Tb³⁺ and Sm³⁺ were synthesized. The quality of white light is characterized by CIE chromaticity coordinates, color temperature, color rendering index and quantum yield.

Doping effect of Sm on the TiO2/CeSmOx catalyst in the NH3-SCR reaction: structure–activity relationship, reaction mechanism and SO2 tolerance

A good balance between the redox properties and surface acidity induces the high activity of the Sm doped TiO₂/CeO₂ catalyst.

Correlating morphology and doping effects with the carbon monoxide catalytic activity of Zn doped CeO2 nanocrystals

The morphology-dependent doping effects on CeO₂ nanocrystals were investigated for the catalytic oxidation of carbon monoxide (CO).

Functional Paper-Based Platform for Rapid Capture and Detection of CeO2 Nanoparticles

Development of systems for capture, sequestration, and tracking of nanoparticles (NPs) is becoming a significant focus in many aspects of nanotechnology and environmental research. These systems enable a broad range of applications for evaluating concentration, distribution, and effects of NPs for environmental, clinical, epidemiological, and occupational exposure studies. Herein, we describe the first example of a ligand-graft multifunctional platform for capture and detection of cerium oxide (CeO₂ or ceria) NPs. The approach involves the use of redox-active ligands containing o-dihydroxy functionality, enabling multivalent binding, surface retention, and formation of charge transfer complexes between the grafted ligand and the NPs. Using this strategy, paper-based and microarray-printed platforms with NP-capture ability involving either catechol or ascorbic acid as ligands were successfully fabricated. Surface modification was determined by infrared spectroscopy, electron microscopy, X-ray spectroscopy, and thermogravimetric analysis. Functionality was demonstrated for the rapid assessment of NPs in chemical mechanical planarization (CMP) slurries and CMP wastewaters. This novel approach can enable further development of devices and separation technologies including platforms for retention and separation of NPs and measurement tools for detection of NPs in various environments.

Low-temperature CO oxidation over CeO2 and CeO2@Co3O4 core–shell microspheres

The excellent CO catalytic activity and stability of CeO₂@Co₃O₄ composite were ascribed to the synergistic interactions between Co₃O₄ and CeO₂.

Accelerated synthesis of MnO2 nanocomposites by acid-free hydrothermal route for catalytic soot combustion

MnO₂ nanocomposites with porous structure were successfully synthesized by a facile hydrothermal route from KMnO₄ without the addition of any acid.

Engineering the defect state and reducibility of ceria based nanoparticles for improved anti-oxidation performance

Due to their excellent anti-oxidation performance, CeO2 nanoparticles receive wide attention in pharmacological application. Deep understanding of the anti-oxidation mechanism of CeO2 nanoparticles is extremely important to develop potent CeO2 nanomaterials for anti-oxidation application. Here, we report a detailed study on the anti-oxidation process of CeO2 nanoparticles. The valence state and coordination structure of Ce are characterized before and after the addition of H2O2 to understand the anti-oxidation mechanism of CeO2 nanoparticles. Adsorbed peroxide species are detected during the anti-oxidation process, which are responsible for the red-shifted UV-vis absorption spectra of CeO2 nanoparticles. Furthermore, the coordination number of Ce in the first coordination shell slightly increased after the addition of H2O2. On the basis of these experimental results, the reactivity of coordination sites for peroxide species is considered to play a key role in the anti-oxidation performance of CeO2 nanoparticles. Furthermore, we present a robust method to engineer the anti-oxidation performance of CeO2 nanoparticles through the modification of the defect state and reducibility by doping with Gd(3+). Improved anti-oxidation performance is also observed in cell culture, where the biocompatible CeO2-based nanoparticles can protect INS-1 cells from oxidative stress induced by H2O2, suggesting the potential application of CeO2 nanoparticles in the treatment of diabetes.

The Effect of Cerium Oxide Nanoparticle Valence State on Reactive Oxygen Species and Toxicity

Cerium oxide (CeO2) nanoparticles, which are used in a variety of products including solar cells, gas sensors, and catalysts, are expected to increase in industrial use. This will subsequently lead to additional occupational exposures, making toxicology screenings crucial. Previous toxicology studies have presented conflicting results as to the extent of CeO2 toxicity, which is hypothesized to be due to the ability of Ce to exist in both a +3 and +4 valence state. Thus, to study whether valence state and oxygen vacancy concentration are important in CeO2 toxicity, CeO2 nanoparticles were doped with gadolinium to adjust the cation (Ce, Gd) and anion (O) defect states. The hypothesis that doping would increase toxicity and decrease antioxidant abilities as a result of increased oxygen vacancies and inhibition of +3 to +4 transition was tested. Differences in toxicity and reactivity based on valence state were determined in RLE-6TN rat alveolar epithelial and NR8383 rat alveolar macrophage cells using enhanced dark field microscopy, electron paramagnetic resonance (EPR), and annexin V/propidium iodide cell viability stain. Results from EPR indicated that as doping increased, antioxidant potential decreased. Alternatively, doping had no effect on toxicity at 24 h. The present results imply that as doping increases, thus subsequently increasing the Ce(3+)/Ce(4+) ratio, antioxidant potential decreases, suggesting that differences in reactivity of CeO2 are due to the ability of Ce to transition between the two valence states and the presence of increased oxygen vacancies, rather than dependent on a specific valence state.

Vacancy mediated ionic conduction in Dy substituted nanoceria: a structure–property correlation study

Origin of vacancies in ceria due to doping.

Preparation of P(St-co-MAA)/CeO2 composite microspheres via surface carboxyl oxidation followed by in situ chemical deposition of CeO2 and their catalytic application on oxidative degradation of methyl orange

P(St-co-MAA)/CeO₂ composites microspheres were fabricated by a novel and facile approach, exhibiting excellent catalytic performance in oxidative degradation.