Plasma Surface Engineering of Natural and Sustainable Polymeric Derivatives and Their Potential Applications

Recently, natural as well as synthetic polymers have been receiving significant attention as candidates to replace non-renewable materials. With the exponential developments in the world each day, the collateral damage to the environment is incessant. Increased demands for reducing pollution and energy consumption are the driving force behind the research related to surface-modified natural fibers (NFs), polymers, and various derivatives of them such as natural-fiber-reinforced polymer composites. Natural fibers have received special attention for industrial applications due to their favorable characteristics, such as low cost, abundance, light weight, and biodegradable nature. Even though NFs offer many potential applications, they still face some challenges in terms of durability, strength, and processing. Many of these have been addressed by various surface modification methodologies and compositing with polymers. Among different surface treatment strategies, low-temperature plasma (LTP) surface treatment has recently received special attention for tailoring surface properties of different materials, including NFs and synthetic polymers, without affecting any of the bulk properties of these materials. Hence, it is very important to get an overview of the latest developments in this field. The present article attempts to give an overview of different materials such as NFs, synthetic polymers, and composites. Special attention was placed on the low-temperature plasma-based surface engineering of these materials for diverse applications, which include but are not limited to environmental remediation, packaging, biomedical devices, and sensor development.

Improving Seed Germination by Cold Atmospheric Plasma

Cold atmospheric plasma (CAP) is a tunable source of reactive species and other physical factors. It exerts luxuriant biochemical effects on diverse cells, including bacterial cells, mammalian cells, and plant cells. Over the past decade, CAP has shown promising application in modern agriculture. Here, we focused on the state of the art of plasma agriculture, particularly the improvement of seed germination rates. Typical plasma sources, underlying physical principles, and the chemical and cellular mechanism of plasma’s effect on plants seeds have been discussed in depth.

Phenolic and Antioxidant Analysis of Olive Leaves Extracts (Olea europaea L.) Obtained by High Voltage Electrical Discharges (HVED)

Background: The aim of this study was to evaluate high voltage electrical discharges (HVED) as a green technology, in order to establish the effectiveness of phenolic extraction from olive leaves against conventional extraction (CE). HVED parameters included different green solvents (water, ethanol), treatment times (3 and 9 min), gases (nitrogen, argon), and voltages (15, 20, 25 kV). Methods: Phenolic compounds were characterized by ultra-performance liquid chromatography-tandem mass spectrometer (UPLC-MS/MS), while antioxidant potency (total phenolic content and antioxidant capacity) were monitored spectrophotometrically. Data for Near infrared spectroscopy (NIR) spectroscopy, colorimetry, zeta potential, particle size, and conductivity were also reported. Results: The highest yield of phenolic compounds was obtained for the sample treated with argon/9 min/20 kV/50% (3.2 times higher as compared to CE). Obtained results suggested the usage of HVED technology in simultaneous extraction and nanoformulation, and production of stable emulsion systems. Antioxidant capacity (AOC) of obtained extracts showed no significant difference upon the HVED treatment. Conclusions: Ethanol with HVED destroys the linkage between phenolic compounds and components of the plant material to which they are bound. All extracts were compliant with legal requirements regarding content of contaminants, pesticide residues and toxic metals. In conclusion, HVED presents an excellent potential for phenolic compounds extraction for further use in functional food manufacturing.

Controlled Surface Wettability by Plasma Polymer Surface Modification

Inspired by nature, tunable wettability has attracted a lot of attention in both academia and industry. Various methods of polymer surface tailoring have been studied to control the changes in wetting behavior. Polymers with a precisely controlled wetting behavior in a specific environment are blessed with a wealth of opportunities and potential applications exploitable in biomaterial engineering. Controlled wetting behavior can be obtained by combining surface chemistry and morphology. Plasma assisted polymer surface modification technique has played a significant part to control surface chemistry and morphology, thus improving the surface wetting properties of polymers in many applications. This review focuses on plasma polymerization and investigations regarding surface chemistry, surface wettability and coating kinetics, as well as coating stability. We begin with a brief overview of plasma polymerization; this includes growth mechanisms of plasma polymerization and influence of plasma parameters. Next, surface wettability and theoretical background structures and chemistry of superhydrophobic and superhydrophilic surfaces are discussed. In this review, a summary is made of recent work on tunable wettability by tailoring surface chemistry with physical appearance (i.e. substrate texture). The formation of smart polymer coatings, which adjust their surface wettability according to outside environment, including, pH, light, electric field and temperature, is also discussed. Finally, the applications of tunable wettability and pH responsiveness of polymer coatings in real life are addressed. This review should be of interest to plasma surface science communality particularly focused controlled wettability of smart polymer surfaces.

Modification of Immobilized Titanium Dioxide Nanostructures by Argon Plasma for Photocatalytic Removal of Organic Dyes

The aim of this study was to modify surface properties of immobilized rutile TiO₂ using Argon cold plasma treatment and to evaluate the performance of the catalyst in photocatalytic elimination of synthetic dyes in UV/TiO₂/H₂O₂ process. The surface-modified TiO₂ was characterized by XRD, EDX, SEM, UV-DRS and XPS analyses. Response surface methodology was adopted to achieve high catalyst efficiency by evaluating the effect of two main independent cold plasma treatment parameters (exposure time and pressure) on surface modification of the catalyst. The increase of the plasma operation pressure led to higher decolorization percentage, while the increase of plasma exposure time decreased the decolorization efficiency. RSM methodology predicted optimum plasma treatment conditions to be 0.78 Torr and 21 min of exposure time, which resulted in decolorization of 10 mg/L solution of the malachite green solution by 94.94% in 30 min. The plasma treatment decreased the oxygen to titanium ratio and caused oxygen vacancy on the surface of the catalyst, resulting in the superior performance of the plasma-treated catalyst. Pseudo first-order kinetic rate constant for the plasma-treated catalyst was 4.28 and 2.03 times higher than the rate constant for the non-treated photocatalyst in decolorization of aqueous solutions of malachite green and crystal violet, respectively.

Microplasma Anode Meeting Molten Salt Electrochemistry: Charge Transfer and Atomic Emission Spectral Analysis

Molten salt electrolysis is normally conducted with solid anode, such as noble metal or graphite, which has defects such as high cost or emission of carbon oxide. Herein, we report that a microplasma based on atmospheric-pressure glow discharge could act as a kind of gaseous anode for electrolysis in molten salt. When the Ag/Ag⁺ redox couple was chosen as the research object, the microplasma anode could initiate charge-transfer reactions in the molten salt and Ag could be electrodeposited with current efficiency of above 90%. The microplasma anode has also shown excellent anticorrosive performance in both chloride and carbonate molten salt. Furthermore, the microplasma anode could potentially serve as an excitation source of atomic emission spectrometry (AES), making it possible to determine the concentration of Ag ions in the molten salt in situ and in real-time. With properties such as being carbon-free and having corrosion resistance and extensive utilization for analysis, the microplasma anode has opened a new direction for molten salt electrochemistry.

Extraction of bioactive compounds and essential oils from mediterranean herbs by conventional and green innovative techniques: A review

Market interest in aromatic plants from the Mediterranean is continuously growing mainly due to their medicinal and bioactive compounds (BACs) with other valuable constituents from essential oils (EOs). From ancient times, these plants have been important condiments for traditional Mediterranean cuisine and remedies in folk medicine. Nowadays, they are considered as important factors for food quality and safety, due to prevention of various deteriorative factors like oxidations and microbial spoilage. EOs have different therapeutic benefits (e.g. antioxidant, anti-inflammatory, antimicrobial, and antifungal), while BACs mostly affect nutritive, chemical, microbiological, and sensory quality of foods. Currently, many plant extracts are used for functional (healthy) foods, which additionally fuels consumer and industrial interest in sustainable and non-toxic routes for their production. EO yields from dried plants are below 5%. Their extraction is strongly dependent on the hydrophobic or lipophilic character of target molecules, hence the common use of organic solvents. Similarly, BACs encompass a wide range of substances with varying structures as reflected by their different physical/chemical qualities. Thus, there is a need to identify optimal non-toxic extraction method(s) for isolation/separation of EO/BCs from plants. Various innovative non-thermal extractions (e.g. ultrasound-, high-pressure-, pulsed electric fields assisted extraction, etc.) have been proposed to overcome the above mentioned limitations. These techniques are "green" in concept, as they are shorter, avoid toxic chemicals, and are able to improve extract yields and quality with reduced consumption of energy and solvents. This research provides an overview of such extractions of both BAC and EOs from Mediterranean herbs, sustained by innovative and non-conventional energy sources.

Behavior of Zein in Aqueous Ethanol under Atmospheric Pressure Cold Plasma Treatment

The effects of atmospheric cold plasma (ACP) on zein in aqueous ethanol (80%, v/v) were investigated including particle size distribution, molecular structure, and content of free sulfhydryl (free-SH) group and disulfide bond, etc. The film-forming properties of zein films were also characterized. After ACP treatment, the particle size of zein aggregates showed a remarkable decrease and uniform particle distribution. There was a downward trend both in pH value and viscosity with the increasing ACP treatment intensity. Moreover, the increase of disulfide bonds concentration was suggested to be correlated to the compact structure strengthened by cross-linking between zein molecules. It was proved from SEM micrographs that plasma could significantly decrease the aggregation degree of zein micelles. There was a slight decrease of the peak intensity in UV and fluorescence spectra compared with native zein, indicating the bulk structure of zein solution had not been disrupted. The reinforced flexibility and tensile strength of zein films had been observed after treatment on film-forming solution. This study provided an experimental basis for the investigation on behavior of plasma-treated protein in solution.

Enhancing the water repellency of wood surfaces by atmospheric pressure cold plasma deposition of fluorocarbon film

This study explores the fluorocarbon deposition on wood by atmospheric pressure plasma, with the focus on higher water repellency.

Variation in structure of proteins by adjusting reactive oxygen and nitrogen species generated from dielectric barrier discharge jet

Over the last few years, the variation in liquid chemistry due to the development of radicals generated by cold atmospheric plasma (CAP) has played an important role in plasma medicine. CAP direct treatment or CAP activated media treatment in cancer cells shows promising anticancer activity for both in vivo and in vitro studies. However, the anticancer activity or antimicrobial activity varies between plasma devices due to the different abilities among plasma devices to generate the reactive oxygen and nitrogen species (RONS) at different ratios and in different concentrations. While the generation of RONS depends on many factors, the feeding gas plays the most important role among the factors. Hence, in this study we used different compositions of feeding gas while fixing all other plasma characteristics. We used Ar, Ar-O₂ (at different ratios), and Ar-N₂ (at different ratios) as the working gases for CAP and investigated the structural changes in proteins (Hemoglobin (Hb) and Myoglobin (Mb)). We then analyzed the influence of RONS generated in liquid on the conformations of proteins. Additionally, to determine the influence of H₂O₂ on the Hb and Mb structures, we used molecular dynamic simulation.

Mechanism and comparison of needle-type non-thermal direct and indirect atmospheric pressure plasma jets on the degradation of dyes

Purified water supply for human use, agriculture and industry is the major global priority nowadays. The advanced oxidation process based on atmospheric pressure non-thermal plasma (NTP) has been used for purification of wastewater, although the underlying mechanisms of degradation of organic pollutants are still unknown. In this study we employ two needle-type atmospheric pressure non-thermal plasma jets, i.e., indirect (ID-APPJ) and direct (D-APPJ) jets operating at Ar feed gas, for the treatment of methylene blue, methyl orange and congo red dyes, for two different times (i.e., 20 min and 30 min). Specifically, we study the decolorization/degradation of all three dyes using the above mentioned plasma sources, by means of UV-Vis spectroscopy, HPLC and a density meter. We also employ mass spectroscopy to verify whether only decolorization or also degradation takes place after treatment of the dyes by the NTP jets. Additionally, we analyze the interaction of OH radicals with all three dyes using reactive molecular dynamics simulations, based on the density functional-tight binding method. This investigation represents the first report on the degradation of these three different dyes by two types of NTP setups, analyzed by various methods, and based on both experimental and computational studies.

Heterogeneous sono-Fenton process using pyrite nanorods prepared by non-thermal plasma for degradation of an anthraquinone dye

Natural pyrite (NP) was treated using oxygen and nitrogen non-thermal plasmas to form modified catalysts. Cleaning effect of the O2 plasma by chemical etching leads to removal of impurities from catalyst surface and sputtering effect of the N2 plasma results in formation of pyrite nanorods. The mentioned plasmas were applied separately or in the order of first O2 and then N2, respectively. The catalytic performance of the plasma-modified pyrites (PMPs) is better than the NP for treatment of Reactive Blue 69 (RB69) in heterogeneous sono-Fenton process (US/H2O2/PMP). The NP and the most effective modified pyrite (PMP4) samples were characterized by XRD, FT-IR, SEM, EDX, XPS and BET analyses. The desired amounts were chosen for operational parameters including initial pH (5), H2O2 concentration (1mM), PMP4 dosage (0.6g/L), dye concentration (20mg/L), and ultrasonic power (300W). Moreover, the effects of peroxydisulfate and inorganic salts on the degradation efficiency were investigated. Gas chromatography-mass spectrometry (GC-MS) method was applied to identify the generated intermediates and a plausible pathway was proposed for RB69 degradation. Environmentally-friendly modification of the NP, low amount of leached iron and repeated reusability at milder pH are the significant privileges of the PMP4. The phytotoxicity test using Spirodela polyrrhiza verified the remarkable toxicity removal of the RB69 solution after the treatment process.

Selective Plasma Etching of Polymeric Substrates for Advanced Applications

In today’s nanoworld, there is a strong need to manipulate and process materials on an atom-by-atom scale with new tools such as reactive plasma, which in some states enables high selectivity of interaction between plasma species and materials. These interactions first involve preferential interactions with precise bonds in materials and later cause etching. This typically occurs based on material stability, which leads to preferential etching of one material over other. This process is especially interesting for polymeric substrates with increasing complexity and a “zoo” of bonds, which are used in numerous applications. In this comprehensive summary, we encompass the complete selective etching of polymers and polymer matrix micro-/nanocomposites with plasma and unravel the mechanisms behind the scenes, which ultimately leads to the enhancement of surface properties and device performance.

Nanocapillary Atmospheric Pressure Plasma Jet: A Tool for Ultrafine Maskless Surface Modification at Atmospheric Pressure

With respect to microsized surface functionalization techniques we proposed the use of a maskless, versatile, simple tool, represented by a nano- or microcapillary atmospheric pressure plasma jet for producing microsized controlled etching, chemical vapor deposition, and chemical modification patterns on polymeric surfaces. In this work we show the possibility of size-controlled surface amination, and we discuss it as a function of different processing parameters. Moreover, we prove the successful connection of labeled sugar chains on the functionalized microscale patterns, indicating the possibility to use ultrafine capillary atmospheric pressure plasma jets as versatile tools for biosensing, tissue engineering, and related biomedical applications.

Controlling fungal biofilms with functional drug delivery denture biomaterials

Candida-associated denture stomatitis (CADS), caused by colonization and biofilm-formation of Candida species on denture surfaces, is a significant clinical concern. We show here that modification of conventional denture materials with functional groups can significantly increase drug binding capacity and control drug release rate of the resulting denture materials for potentially managing CADS. In our approach, poly(methyl methacrylate) (PMMA)-based denture resins were surface grafted with three kinds of polymers, poly(1-vinyl-2-pyrrolidinone) (PNVP), poly(methacrylic acid) (PMAA), and poly(2-hydroxyethyl methacrylate) (PHEMA), through plasma-initiated grafting polymerization. With a grafting yield as low as 2 wt%, the three classes of new functionalized denture materials showed significantly higher drug binding capacities toward miconazole, a widely used antifungal drug, than the original PMMA denture resin control, leading to sustained drug release and potent biofilm-controlling effects against Candida. Among the three classes of functionalized denture materials, PNVP-grafted resin provided the highest miconazole binding capability and the most powerful antifungal and biofilm-controlling activities. Drug binding mechanisms were studied. These results demonstrated the importance of specific interactions between drug molecules and functional groups on biomaterials, shedding lights on future design of CADS-managing denture materials and other related devices for controlled drug delivery.

Free-Radical-Induced Grafting from Plasma Polymer Surfaces

With the advances in science and engineering in the second part of the 20th century, emerging plasma-based technologies continuously find increasing applications in the domain of polymer chemistry, among others. Plasma technologies are predominantly used in two different ways: for the treatment of polymer substrates by a reactive or inert gas aiming at a specific surface functionalization or for the synthesis of a plasma polymer with a unique set of properties from an organic or mixed organic-inorganic precursor. Plasma polymer films (PPFs), often deposited by plasma-enhanced chemical vapor deposition (PECVD), currently attract a great deal of attention. Such films are widely used in various fields for the coating of solid substrates, including membranes, semiconductors, metals, textiles, and polymers, because of a combination of interesting properties such as excellent adhesion, highly cross-linked structures, and the possibility of tuning properties by simply varying the precursor and/or the synthesis parameters. Among the many appealing features of plasma-synthesized and -treated polymers, a highly reactive surface, rich in free radicals arising from deposition/treatment specifics, offers a particular advantage. When handled carefully, these reactive free radicals open doors to the controllable surface functionalization of materials without affecting their bulk properties. The goal of this review is to illustrate the increasing application of plasma-based technologies for tuning the surface properties of polymers, principally through free-radical chemistry.

Heterogeneous sono-Fenton-like process using nanostructured pyrite prepared by Ar glow discharge plasma for treatment of a textile dye

The plasma-treated pyrite (PTP) nanostructures were prepared from natural pyrite (NP) utilizing argon plasma due to its sputtering and cleaning effects resulting in more active surface area. The NP and PTP were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET) and scanning electron microscopy (SEM) methods. The performance of the PTP was greater than NP for treatment of Reactive Red 84 (RR84) by the heterogeneous sono-Fenton process. The optimum amounts of main operational parameters were obtained as PTP of 4 g/L, initial dye concentration of 10 mg/L, pH of 5, and ultrasonic power of 300 W after 120 min of reaction time. Also, the effects of enhancers, and inorganic salts and t-butanol as hydroxyl radical scavengers on the degradation efficiency were investigated. Gas chromatography-mass spectroscopy analysis (GC-MS) was applied for detection of some degradation intermediates. Environmentally friendly plasma modification of the NP, in situ production of H2O2 and OH radicals, low leached iron concentration and repeated reusability at the milder pH are the significant benefits of the PTP utilization.

Disinfection of water by pulsed power technique: a mechanistic perspective

A detailed sub-cellular level bacterial disinfection mechanism and perturbation of bacterial surface potential due to ROS/RNS in pulsed plasma treatment.

Adjusting the stability of plasma treated superhydrophobic surfaces by different modifications or microstructures

Different time stabilities of plasma-induced hydrophilicity and wettability patterns have been realized by dissimilar microstructures.

Production of clinoptilolite nanorods by glow discharge plasma technique for heterogeneous catalytic ozonation of nalidixic acid

This study investigates nalidixic acid degradationviaheterogeneous catalytic ozonation using clinoptilolite nanorods (CNs) as a novel nanocatalyst.

Liquid metal soft electrode triggered discharge plasma in aqueous solution

This paper reports a fundamental phenomenon whereby discharge plasma can be easily triggered in aqueous solution under a low voltage via a liquid metal electrode that is either static or a jetting stream.

Preparation of nanostructured pyrite with N2glow discharge plasma and the study of its catalytic performance in the heterogeneous Fenton process

Pyrite ores were converted to pyrite nanostructures using N₂plasma for use as effective reusable catalysts in the heterogeneous Fenton process.

Influence of ionic liquid and ionic salt on protein against the reactive species generated using dielectric barrier discharge plasma

The presence of salts in biological solution can affect the activity of the reactive species (RS) generated by plasma, and so they can also have an influence on the plasma-induced sterilization. In this work, we assess the influence that diethylammonium dihydrogen phosphate (DEAP), an ionic liquid (IL), and sodium chloride (NaCl), an ionic salt (IS), have on the structural changes in hemoglobin (Hb) in the presence of RS generated using dielectric barrier discharge (DBD) plasma in the presence of various gases [O₂, N₂, Ar, He, NO (10%) + N₂ and Air]. We carry out fluorescence spectroscopy to verify the generation of ^•OH with or without the presence of DEAP IL and IS, and we use electron spin resonance (ESR) to check the generation of H^• and ^•OH. In addition, we verified the structural changes in the Hb structure after treatment with DBD in presence and absence of IL and IS. We then assessed the structural stability of the Hb in the presence of IL and IS by using molecular dynamic (MD) simulations. Our results indicate that the IL has a strong effect on the conservation of the Hb structure relative to that of IS against RS generated by plasma.

A comparative study for the inactivation of multidrug resistance bacteria using dielectric barrier discharge and nano-second pulsed plasma

Bacteria can be inactivated through various physical and chemical means, and these have always been the focus of extensive research. To further improve the methodology for these ends, two types of plasma systems were investigated: nano-second pulsed plasma (NPP) as liquid discharge plasma and an Argon gas-feeding dielectric barrier discharge (Ar-DBD) as a form of surface plasma. To understand the sterilizing action of these two different plasma sources, we performed experiments with Staphylococcus aureus (S. aureus) bacteria (wild type) and multidrug resistant bacteria (Penicillum-resistant, Methicillin-resistant and Gentamicin-resistant). We observed that both plasma sources can inactivate both the wild type and multidrug-resistant bacteria to a good extent. Moreover, we observed a change in the surface morphology, gene expression and β-lactamase activity. Furthermore, we used X-ray photoelectron spectroscopy to investigate the variation in functional groups (C-H/C-C, C-OH and C=O) of the peptidoglycan (PG) resulting from exposure to plasma species. To obtain atomic scale insight in the plasma-cell interactions and support our experimental observations, we have performed molecular dynamics simulations to study the effects of plasma species, such as OH, H₂O₂, O, O₃, as well as O₂ and H₂O, on the dissociation/formation of above mentioned functional groups in PG.

Surface modification of polyamide composite membranes by corona air plasma for gas separation applications

Corona air plasma was successfully used to modify the surface of dual-layer PA6/PES composite membranes in order to improve their gas separation performance.

Effect of nanosecond-pulsed plasma on the structural modification of biomolecules

Nanosecond-pulsed plasma (NPP) action on biomolecules modification.

Formation of ammonium in saline solution treated by nanosecond pulsed cold atmospheric microplasma: a route to fast inactivation of E. coli bacteria

The formation of significant NH₄⁺species in saline solutions treated by He/N₂cold atmospheric plasma is proposed for the first time as the main process responsible for the fast bacterial inactivation ofE. coliat ambient temperature and physiological pH.

Atmospheric-pressure microplasma as anode for rapid and simple electrochemical deposition of copper and cuprous oxide nanostructures

Atmospheric-pressure microplasma could be applied as gaseous anode for transferring positive charges and controllably electrodepositing Cu and Cu₂O nanocrystals.

Free radical-induced grafting from plasma polymers for the synthesis of thin barrier coatings

Enhanced barrier properties of Al substrate coated by plasma polymer film grafted with radical-induced polymer.

In-package nonthermal plasma degradation of pesticides on fresh produce

In-package nonthermal plasma (NTP) technology is a novel technology for the decontamination of foods and biological materials. This study presents the first report on the potential of the technology for the degradation of pesticide residues on fresh produce. A cocktail of pesticides, namely azoxystrobin, cyprodinil, fludioxonil and pyriproxyfen was tested on strawberries. The concentrations of these pesticides were monitored in priori and post-plasma treatment using GC-MS/MS. An applied voltage and time dependent degradation of the pesticides was observed for treatment voltages of 60, 70 and 80 kV and treatment durations ranging from 1 to 5 min, followed by 24h in-pack storage. The electrical characterisation revealed the operation of the discharge in a stable filamentary regime. The discharge was found to generate reactive oxygen and excited nitrogen species as observed by optical emission spectroscopy.

Influence of reactive oxygen species on the enzyme stability and activity in the presence of ionic liquids

In this paper, we have examined the effect of ammonium and imidazolium based ionic liquids (ILs) on the stability and activity of proteolytic enzyme α-chymotrypsin (CT) in the presence of cold atmospheric pressure plasma jet (APPJ). The present work aims to illustrate the state of art implementing the combined action of ILs and APPJ on the enzyme stability and activity. Our circular dichroism (CD), fluorescence and enzyme activity results of CT have revealed that buffer and all studied ILs {triethylammonium hydrogen sulphate (TEAS) from ammonium family and 1-butyl-3-methyl imidazolium chloride ([Bmim][Cl]), 1-methylimidazolium chloride ([Mim][Cl]) from imidazolium family} are notable to act as protective agents against the deleterious action of the APPJ, except triethylammonium dihydrogen phosphate (TEAP) ammonium IL. However, TEAP attenuates strongly the deleterious action of reactive oxygen species (ROS) created by APPJ on native structure of CT. Further, TEAP is able to retain the enzymatic activity after APPJ exposure which is absent in all the other systems.This study provides the first combined effect of APPJ and ILs on biomolecules that may generate many theoretical and experimental opportunities. Through this methodology, we can utilise both enzyme and plasma simultaneously without affecting the enzyme structure and activity on the material surface; which can prove to be applicable in various fields.