Transformation of PMMA from sunlight-blocking to sunlight-activated coupled with DNH photocatalytic platform for oxidative coupling of amines and generation/regeneration of LDC/NADH

The photocatalytic oxidation and generation/regeneration of amines to imines and leucodopaminechrome (LDC)/NADH are subjects of intense interest in contemporary research. Imines serve as crucial intermediates for the synthesis of solar fuels, fine chemicals, agricultural chemicals, and pharmaceuticals. While significant progress has been made in developing efficient processes for the oxidation and generation/regeneration of secondary amines, the oxidation of primary amines has received comparatively less attention until recently. This discrepancy can be attributed to the high reactivity of imines generated from primary amines, which are prone to dehydrogenation into nitriles. In this study, we present the synthesis and characterization of a novel polymer-based photocatalyst, denoted as PMMA-DNH, designed for solar light-harvesting applications. PMMA-DNH incorporates the light-harvesting molecule dinitrophenyl hydrazine (DNH) at varying concentrations (5%, 10%, 20%, 30%, and 40%). Leveraging its high molar extinction coefficient and slow charge recombination, the 30% DNH-incorporated PMMA photocatalyst proves to be particularly efficient. This photocatalytic system demonstrates exceptional yields (96.5%) in imine production and high generation/regeneration rates for LDC/NADH (65.27%/78.77%). The research presented herein emphasizes the development and application of a newly engineered polymer-based photocatalyst, which holds significant promise for direct solar-assisted chemical synthesis in diverse commercial applications.

Functionalized graphene oxide by 4-amino-3-hydroxy-1-naphthalenesulfonic acid as a heterogeneous nanocatalyst for the one-pot synthesis of tetraketone and tetrahydrobenzo[b]pyran derivatives under green conditions

4-Amino-3-hydroxy-1-naphthalenesulfonic acid-functionalized graphene oxide (GO-ANSA) was prepared and characterized using different spectroscopic, microscopic and analytical methods including energy-dispersive X-ray spectroscopy (EDS), EDS elemental mapping, Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and thermogravimetry/differential thermogravimetry analysis (TGA/DTA). The obtained nanomaterial was used as a novel, highly efficient, and reusable solid acid carbocatalyst for the one-pot three-component synthesis of tetraketone, as well as tetrahydrobenzo[b]pyran derivatives via tandem Knoevenagel-Michael reactions under green conditions. All of the derivatives were prepared in EtOH, as a green solvent, under reflux conditions in high to excellent yields and very short reaction times. The nanocatalyst was recovered and reused at least five times without significant reduction in its activity. In addition, the absence of toxic transition metals, high to excellent yields, mild reaction conditions, simple procedure for the separation and purification of products, stability, and recycling of the catalyst are the most important advantages of this green procedure.

Construction of Ag/CdZnS QDs nanocomposite for enhanced visible light photoinactivation of Staphylococcus aureus

With increasing use of antibiotics, the development of antibiotic-resistant pathogens poses a serious threat to human health and the environment. Photocatalytic inactivation of these harmful pathogens is one of the novel and non-antibiotic treatments. The study fabricated Ag NPs decorated CdZnS QDs via a facile and biological co-precipitation method using L. camara plant extract as a green alternative to treat the toxic chemicals. The fabricated Ag/CdZnS QDs (NCs) were prepared for the efficient treatment of antibiotic-resistant pathogens as they raise a major global concern. The fabricated NCs were characterized with various characterization techniques to verify its physicochemical properties. The fabricated NCs have shown excellent photo-sterilization performance of 97 % against S. aureus. The excellent activity was attributed to the decoration of Ag NPs on CdZnS QDs as it helped in shortening band gap, improved visible light absorption ability, increased active sites, and boosted photogenerated electron/hole pairs stability. Radical trapping experiment and ESR analysis indicated the involvement of •OH and h+ in the photoinactivation of bacteria. The photo sterilization reaction of NCs was carried out under different environmental conditions, including light and dark conditions and different pH conditions. The experiment was carried out in sewage-treated water in order to test the real-time application, and the fabricated NCs achieved excellent 95.9 % photo-inactivation of S. aureus cells in sewage treated water and the Chemical Oxygen Demand (COD) of the system was increased after photo inactivation treatment. The fabricated NCs have also shown excellent reusable efficiency of 95% after six runs and the photostability and anti-corrosive nature of NCs were confirmed. The study provides an insight for the employment of photocatalysis for the sterilization of pathogens in real time aquatic environment across the globe.

Ni-Doped In2O3 Nanoparticles and Their Composite with rGO for Efficient Degradation of Organic Pollutants in Wastewater under Visible Light Irradiation

The efficient degradation of organic effluent is always desirable when using advanced photocatalysts with enhanced activity under visible light. Nickel-doped indium oxide (Ni-In₂O₃) is synthesized via a hydrothermal route as well as its composites with reduced graphene oxide (rGO). Facile synthesis and composite formation methods lead to a well-defined morphology of fabricated nanocomposite at low temperatures. The bandgap energy of indium oxide lies in the range of 3.00-4.30 eV. Its high light absorption capacity, high stability, and non-toxicity make it a choice as a photocatalyst that is active under visible light. The transition metal Ni-doping changes the indium oxide's chemical, optical, and physicochemical properties. The Ni-In₂O₃ and rGO composites improved the charge transport and reduced the charge recombination. The phase analysis of the developed photocatalysts was performed using X-ray diffraction (XRD), and the morphological and structural properties were observed using advanced microscopic techniques (SEM and TEM), while UV-vis and FTIR spectroscopic techniques were used to confirm the structure and optical and chemical properties. The electrochemical properties of the photocatalysts were investigated using cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS), and the charge-transfer properties of the obtained photocatalysts and the mechanism of the photocatalytic degradation mechanism of methylene blue, a common dye used in the dyeing industry, were determined.

Photo-Oxidation of Organic Dye by Fe2O3 Nanoparticles: Catalyst, Electron Acceptor, and Polyurethane Membrane (PU-Fe2O3) Effects

The textile industry’s discharges have long been regarded as severe water pollution. The photocatalytic degradation of dyes using semiconductors is one of the crucial methods. The present study efficiently used the mechanical method to synthesize Iron oxide Nanoparticles. XRD, FT-IR, UV-Vis DRS, and Raman analyses were performed to analyze the structural and optical. From the data provided by XRD and Raman data, we believed that the as-synthesized Iron oxide was pure hematite (α-Fe2O3) with a hexagonal structure. Additionally, the EDS results show that the synthesized material is pure. By adjusting specific parameters, including the dye concentration, the catalyst dosage, the pH, and the oxidizing agent such as H2O2 and K2S2O8, the degradation of eosin yellowish using Fe2O3 as a photocatalyst has been discussed. Additionally, the kinetics of eosin yellowish degradation has been studied. A study was also conducted using Fe2O3 nanoparticles attached to polyurethane polymer (PU) to investigate its photocatalytic activity on methylene blue, methyl orange, and indigo carmine. In 30 minutes, nearly 90% of the dyes had degraded. The total organic carbon (TOC) analysis confirmed this result.

Role of interfacial contact between 2D materials and preselected nanostructures in the degradation of toxic dyes: Multifunctional facets of graphene

Designing intimate interfacial contact between nanostructures and two-dimensional (2D) materials is highly desirable to influence the movement of generated charge carriers. Nanostructured zinc oxide (ZnO) is a fascinating material with unique optical and electrical properties. 2D reduced graphene oxide (rGO) exhibits semiconductor behaviour with tunable catalytic activity and excellent biocompatibility. Hence, we have designed a hybrid material by selecting nanostructures of an oxide semiconductor (ZnO) with reduced graphene oxide (rGO) using a hard integration technique followed by a low-temperature hydrothermal route. The good encapsulation of rGO over the ZnO nanorods was confirmed by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. The photocatalytic activities of ZnO, rGO, and ZnO/rGO were studied under visible-light irradiation using three different toxic dyes, methylene blue (MB), methyl orange (MO), and Congo red (CR). The composite materials exhibited excellent efficiencies of 100, 95, and 90% for the degradation of MB, MO, and CR, respectively. Moreover, the degradation of the dye was found to follow first-order kinetics. The enhanced efficiencies are attributed to the adsorption and efficient charge transfer from rGO to the conduction band of ZnO. The role of the multifunctional facets of graphene was presented to elucidate the visible-light activity of the composite materials for enhanced efficiency. The main reactive species (e^-) of the reduction reaction were confirmed through a radical trapping experiment, which showed the generation of highly reactive •OH radicals that decompose the toxic dye. The results provide a perspective for developing graphene-based composite materials with desired preselected nanostructures for solar energy utilisation.

Green synthesis of two-electron centre based ZnO/NiCo2S4 QDs-OVs using Punica granatum fruit peel extract for an exceptional visible light photocatalytic degradation of doxycycline and ciprofloxacin

Biosynthesis of nanomaterials using plant extract makes them attractive in the field of photocatalysis as they are environmental friendly. The current study focused on the biosynthesis of ZnO/NiCo₂S₄ QDs (NCs) using Punica granatum fruit peel extract as the reducing agent. The nanomaterials were characterized with XRD, FTIR, Raman, SEM, TEM, UV-vis DRS, BET, PL, EIS, and ESR analysis and were used for photocatalytic degradation of doxycycline (DOX) and ciprofloxacin (CIP). The bandgap of ZnO is 3.2 eV, and the decoration of NiCo₂S₄ QDs aids in narrowing the bandgap (2.8 eV), making the NCs visible light active. The fabricated NCs achieved 99 and 89% degradation of DOX and CIP respectively. The photocatalytic efficiency of ZnO/NiCo₂S₄ QDs was much higher compared to individual ZnO and NiCo₂S₄ QDs. The half-life period of DOX and CIP were evaluated to be 58 and 152 min respectively. The percentage of TOC removal in the photodegraded product of DOX and CIP was estimated to be 99 and 89% respectively, indicating the mineralization of the compounds. The enhanced photocatalytic efficiency of the NCs was attributed to the narrowed visible light active bandgap, synergistic charge transfer across the interface, and lower charge recombination. The intermediates formed during the photocatalytic degradation of DOX and CIP were analyzed using GC-MS/MS analysis, and the photodegradation pathway was elucidated. Also, the toxicity of the intermediates was computationally analyzed using ECOSAR software. The fabricated ZnO/NiCo₂S₄ QDs have excellent stability and reusability, confirmed by XRD and XPS analysis. The reusable efficiency of the NCs for the photocatalytic degradation of DOX and CIP were 98.93, and 99.4% respectively. Thus, the biologically fabricated NCs are shown to be an excellent photocatalyst and have wide applications in environmental remediation.

Multiple ions detection by field-effect transistor sensors based on ZnO@GO and ZnO@rGO nanomaterials: Application to trace detection of Cr (III) and Cu (II)

This work narrates the preparation of efficient nanomaterials framework of zinc oxide (ZnO) nanoglobules (NGs) with graphene oxide (GO) and reduced graphene oxide (rGO) for the fabrication of rapid multiple ion field-effect transistor (MI-FET) sensors. Prepared ZnO-NGs@GO and ZnO-NGs@rGO nanocomposites were broadly analyzed by different analytical techniques to study their morphological, structural, compositional, and electrochemical properties. As electrode materials, ZnO-NGs@GO and ZnO-NGs@rGO were used to fabricate MI-FETs sensor for the detection of multiple ions such as Ni (II), Co (II), Cu (II), Cr (III), Fe (II), and Bi (II) ions. ZnO-NGs@GO and ZnO-NGs@rGO modified MI-FETs sensor exhibited excellent responses towards Cr (III) and Cu (II) ions, which presented the remarkable sensitivities of ~49.28 mA μM^-1. cm^-2 (Cr (III) ions) and ~185.32 mA μM^-1. cm^-2 (Cu (II) ions), respectively. The fabricated MI-FETs sensor displayed good dynamic linear detection of ions with low limit of detection (LOD) values of ~7.05 μM and ~14.9 μM for ZnO-NGs@GO and ZnO-NGs@rGO electrodes, respectively. Efficient charge transfer over electrode considerably enhanced the trace detection of Cr (III) and Cu (II) ions. The fabricated MI-FETs sensor platform exhibited extraordinary reproducibility and excellent stability of sensing performance and thus, confirmed delightful potential to sprout a useful tool for water maintaining system.

Synthesis and characterization of ZnO decorated reduced graphene oxide (ZnO-rGO) and evaluation of its photocatalytic activity toward photodegradation of methylene blue

Photocatalytic treatment is one of the techniques used for the treatment of dyes-contaminated wastewater. It is important to develop an effective visible-light-driven catalyst for the treatment of dyes-contaminated wastewater. This study reports the synthesis of ZnO-reduced graphene oxide catalyst for the degradation of methylene blue. Graphene oxide was prepared by Hammer and Offeman process, while ZnO-rGO (1:1) was prepared by the chemical reduction method. The prepared ZnO-rGO composite was characterized by XRD, TEM, SEM, UV-Vis, DRS, N₂ adsorption-desorption, FTIR, and XPS analyses. The photocatalytic activity was evaluated by photodegradation of methylene blue solution under irradiation. It was found that ZnO-rGO is capable of removing the dye from water and achieved the highest dye degradation efficiency of ~99% within 60 min. Furthermore, the ZnO-rGO was recycled in degradation experiments without any loss in its catalytic performance. The reaction kinetics was described in terms of the Langmuir-Hinshelwood mechanism, one of the kinetics mechanisms of surface catalyzed reaction. 36.2 and 13.1 kJ/mol were calculated as the apparent and true activation energy for photodegradation of methylene blue respectively.

Synthesis, Characterization, and Photocatalytic Activities of Graphene Oxide/metal Oxides Nanocomposites: A Review

Sustainable water processing techniques have been extensively investigated and are capable of improving water quality. Among the techniques, photocatalytic technology has shown great potential in recent years as a low cost, environmentally friendly and sustainable technology. However, the major challenge in the industrial development of photocatalyst technology is to develop an ideal photocatalyst which must have high photocatalytic activity, a large specific surface area, harvest sunlight and shows recyclability. Keeping these views, the present review highlighted the synthesis approaches of graphene/metal oxide nanocomposite, characterization techniques and their prominent applications in photocatalysis. Various parameters such as photocatalyst loading, structure of photocatalyst, temperature, pH, effect of oxidizing species and wavelength of light were addressed which could affect the rate of degradation. Moreover, the formation of intermediates during photo-oxidation of organic pollutants using these photocatalysts is also discussed. The analysis concluded with a synopsis of the importance of graphene-based materials in pollutant removal. Finally, a brief overview of the problems and future approaches in the field is also presented.

Transformation of CuS/ZnS nanomaterials to an efficient visible light photocatalyst by 'photosensitizer' graphene and the potential antimicrobial activities of the nanocomposites

We report the growth of CuS/ZnS (CZS) nanoparticles (NPs) on the graphene sheet by a facile green synthesis process. The CuS/ZnS-graphene (CZSG) nanocomposites exhibit enhanced visible light photocatalytic activity towards organic dye (methylene blue) degradation than that of CZS nanoparticles. To find the reason for the enhanced photo-activity, we propose a new photocatalytic mechanism where graphene in the CZSG nanocomposites acts as a 'photosensitizer' for CZS nanoparticles. This distinctive photocatalytic mechanism is noticeably different from all other previous research works on semiconductor-graphene hybrid photocatalysts where graphene behaves as an electron reservoir to capture the electrons from photo-excited semiconductor. This novel idea of the photocatalytic mechanism in semiconductor-graphene photocatalysts could draw a new track in thinking for designing of graphene-based photocatalysts for solving environmental pollution problems and they also show remarkable antimicrobial activities.

Unravelling the Role of Synthesis Conditions on the Structure of Zinc Oxide-Reduced Graphene Oxide Nanofillers

The diversity of zinc oxide (ZnO) particles and derived composites applications is highly dependent on their structure, size, morphology, defect amounts, and/or presence of dopant molecules. In this work, ZnO nanostructures are grown in situ on graphene oxide (GO) sheets by an easily implementable solvothermal method with simultaneous reduction of GO. The effect of two zinc precursors (zinc acetate (ZA) and zinc acetate dihydrate (ZAD)), NaOH concentration (0.5, 1 or 2 M), and concentration (1 and 12.5 mg/mL) and pH (pH = 1, 4, 8, and 12) of GO suspension were evaluated. While the ZnO particle morphology shows to be precursor dependent, the average particle size length decreases with lower NaOH concentration, as well as with the addition of a higher basicity and concentration of GO suspension. A lowered band gap and a higher specific surface area are obtained from the ZnO composites with higher amounts of GO suspension. Otherwise, the low concentration and the higher pH of GO suspension induce more lattice defects on the ZnO crystal structure. The role of the different condition parameters on the ZnO nanostructures and their interaction with graphene sheets was observed to tune the ZnO–rGO nanofiller properties for photocatalytic and antimicrobial activities.

Interface of GO with SnO2 quantum dots as an efficient visible-light photocatalyst

Graphene oxide (GO) with beneficial functional groups regulates the surface chemistry for catalytic applications. However, the low electrical conductivity of GO invokes further treatments that compromise the above-valued properties. We report an interfacial engineering of GO decorated with SnO₂ quantum dots (QDs) for the visible-light-driven catalysis of dye degradation. Retention of beneficial functional features of GO and QDs in the GO-SnO₂ composite is established by using TEM, FTIR, and Raman spectroscopy techniques. Further, investigations with EXAFS and lifetime-measurements provide the local structure and defects distributions in QDs which are correlated with the improved conductivity. PL and electrochemical impedance spectroscopic measurements help unraveling the charge-transfer across the interface of the GO-SnO₂ composite. The unique ability of ∼94% degradation of MB using only 0.5 mg of GO-SnO₂ catalyst within half an hour under the visible light is demonstrated for the first time with insights on the photocatalytic mechanism.

Biological mediated synthesis of RGO-ZnO composites with enhanced photocatalytic and antibacterial activity

In this study, we reported the biological approach to synthesis of ZnO nanorod (NR) on the reduced graphene oxide (RGO) for photocatalytic, antibacterial activity and hydrogen production under sunlight. Bacillus subtilis played a vital role in the production of biogenic ammonia from synthetic urine and utilized for the synthesis of ZnONR on the RGO sheet. The morphological study revealed that RGO sheets displayed a tremendous role in anchoring ZnONR. XRD patterns showed the ZnO crystal phase on the RGO sheets. XPS and Raman spectra confirmed that the bio-hydrothermal method as suitable for GO converted into RGO. The transient photocurrent and I/V measurement are exhibited as an increment on the RGO-ZnONR compared to ZnONR. The RGO-ZnONR composites showed excellent performance with decolorization of MB and textile dyes and efficient control of the E. coli and S. aureus. RGO-ZnONR exhibited remarkable noted as a higher photocatalytic hydrogen evolution rate (940 μmol/h/g_cat) than the ZnONR (369.5 μmol/h/g _cat). As a result of photocatalytic performance to correlate with sunlight intensity was extensively studied. RGO plays an essential role in interface electron transfer from sunlight to ZnONR for enhancing •OH radical formation to cleavage of dye color substance and eradicated bacterial cells.

Label free, electric field mediated ultrasensitive electrochemical point-of-care device for CEA detection

Developing point-of-care (PoC) diagnostic platforms for carcinoembryonic antigen detection is essential. However, thefew implementations of transferring the signal amplification strategies in electrochemical sensing on paper-based platforms are not satisfactory in terms of detection limit (LOD). In the quest for pushing down LOD, majority of the research has been targeted towards development of improved nanostructured substrates for entrapping more analyte molecules and augmenting the electron transfer rate to the working electrode. But, such approaches have reached saturation. This paper focuses on enhancing the mass transport of the analyte towards the sensor surface through the application of an electric field, in graphene-ZnO nanorods heterostructure. These hybrid nanostructures have been deposited on flexible polyethylene terephthalate substrates with screen printed electrodes for PoC application. The ZnO nanorods have been functionalized with aptamers and the working sensor has been integrated with smartphone interfaced indigenously developed low cost potentiostat. The performance of the system, requiring only 50 µl analyte has been evaluated using electrochemical impedance spectroscopy and validated against commercially available ELISA kit. Limit of detection of 1 fg/ml in human serum with 6.5% coefficient of variation has been demonstrated, which is more than three orders of magnitude lower than the existing attempts on PoC device.

Effects of microencapsulated abamectin on the mechanical, cross-linking, and release properties of PBS

Herein, nanocomposite microencapsulated abamectin (A-G-G) have been prepared by composite coacervation method with gelatin and gum arabic as the wall materials and abamectin (A-W) as core material. The formation mechanism of A-G-G was determined by fourier-transform infrared spectroscopy, scanning electron microscopy, and other characterization methods. Then, polybutylene succinate (PBS)/A-G-G composite films with different contents of A-G-G microcapsules were prepared. The effects of adding A-G-G microcapsules on the mechanical and sustained-release properties of the composite films were studied. Results show that there is a strong interaction between the CO groups in PBS and free OH of the A-G-G microcapsules. With an increase in the A-G-G microcapsule content, the elongation at the break of composite films increases significantly. When the A-G-G content is 15 %, the elongation at break of the composite films reaches 178.6 ± 6.26 %. The maximum water absorption is 329 ± 5.84 %. Overall, the PBS/A-G-G composite films exhibit good slow-release performance.

Advances and Challenges in Developing Efficient Graphene Oxide-Based ZnO Photocatalysts for Dye Photo-Oxidation

The efficient remediation of organic dyes from wastewater is increasingly valuable in water treatment technology, largely owing to the tons of hazardous chemicals currently and constantly released into rivers and seas from various industries, including the paper, pharmaceutical, textile, and dye production industries. Using solar energy as an inexhaustible source, photocatalysis ranks among the most promising wastewater treatment techniques for eliminating persistent organic pollutants and new emerging contaminants. In that context, developing efficient photocatalysts using sunlight irradiation and effectively integrating them into reactors, however, pose major challenges in the technologically relevant application of photocatalysts. As a potential solution, graphene oxide (GO)-based zinc oxide (ZnO) nanocomposites may be used together with different components (i.e., ZnO and GO-based materials) to overcome the drawbacks of ZnO photocatalysts. Indeed, mounting evidence suggests that using GO-based ZnO nanocomposites can promote light absorption, charge separation, charge transportation, and photo-oxidation of dyes. Despite such advances, viable, low-cost GO-based ZnO nanocomposite photocatalysts with sufficient efficiency, stability, and photostability remain to be developed, especially ones that can be integrated into photocatalytic reactors. This article offers a concise overview of state-of-the-art GO-based ZnO nanocomposites and the principal challenges in developing them.

Synthesis and characterization of BiVO4 nanoparticles for environmental applications

In the present study, a chemical precipitation method is adopted to synthesize bismuth vanadate nanoparticles. The calcination temperature dependent photocatalytic and antibacterial activities of BiVO₄ nanoparticles are examined. The structural analysis evidences the monoclinic phase of BiVO₄ nanoparticles, where the grain size increases with calcination temperature. Interestingly, BiVO₄ nanoparticles calcined at 400 °C exhibit superior photocatalytic behaviour against methylene blue dye (K = 0.02169 min⁻¹) under natural solar irradiation, which exhibits good stability for up to three cycles. The evolution of antibacterial activity studies using a well diffusion assay suggest that the BiVO₄ nanoparticles calcined at 400 °C can act as an effective growth inhibitor of pathogenic Gram-negative (P. aeruginosa & A. baumannii) and Gram-positive bacteria (S. aureus).

In the present study, a chemical precipitation method is adopted to synthesize bismuth vanadate nanoparticles.

Reduced graphene oxide supported ZnO quantum dots for visible light-induced simultaneous removal of tetracycline and hexavalent chromium

The photocatalytic mechanism explains that electrons and hydroxyl radicals were responsible for reduction of Cr(vi) and oxidation of tetracycline.

Effect of GO Additive in ZnO/rGO Nanocomposites with Enhanced Photosensitivity and Photocatalytic Activity

Zinc oxide/reduced graphene oxide nanocomposites (ZnO/rGO) are synthesized via a simple one-pot solvothermal technique. The nanoparticle-nanorod turnability was achieved with the increase in GO additive, which was necessary to control the defect formation. The optimal defect in ZnO/rGO not only increased ZnO/rGO surface and carrier concentration, but also provided the alternative carrier pathway assisted with rGO sheet for electron-hole separation and prolonging carrier recombination. These properties are ideal for photodetection and photocatalytic applications. For photosensing properties, ZnO/rGO shows the improvement of photosensitivity compared with pristine ZnO from 1.51 (ZnO) to 3.94 (ZnO/rGO (20%)). Additionally, applying bending strain on ZnO/rGO enhances its photosensitivity even further, as high as 124% at r = 12.5 mm, due to improved surface area and induced negative piezoelectric charge from piezoelectric effect. Moreover, the photocatalytic activity with methylene blue (MB) was studied. It was observed that the rate of MB degradation was higher in presence of ZnO/rGO than pristine ZnO. Therefore, ZnO/rGO became a promising materials for different applications.

Fabrication of eco-friendly nanofibrous membranes functionalized with carboxymethyl-β-cyclodextrin for efficient removal of methylene blue with good recyclability

Considering the excellent thermo-mechanical properties, chemical stability and low cost of biodegradable aliphatic-aromatic copolyesters, they are an ideal matrix when functionalized for capturing pollutants in wastewater. In this work, biodegradable poly((butylene succinate-co-terephthalate)-co-serinol terephthalate) (PBSST) copolyesters with amino side group (-NH₂) were first synthesized through copolymerization, followed by grafting carboxymethyl-β-cyclodextrin (CM-β-CD) into PBSST molecular chains via amidation reaction to prepare PBSST-g-β-CD. The corresponding nanofibrous membranes were then fabricated by electrospinning as adsorbents for efficiently removing cationic dye methyl blue (MB) from aqueous solutions. The adsorption performance of the nanofibrous membranes was fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption capacity was 543.48 mg g^-1 for MB along with a removal efficiency of 98% after five regeneration cycles, indicating the high adsorption capacity and good recyclability of nanofibrous membranes. The adsorbents possess features of high adsorption capacity, eco-friendliness and easy operation, and exhibit great potential for disposing of printing-dying wastewater.

In-situ synthesis of rGO-ZnO nanocomposite for demonstration of sunlight driven enhanced photocatalytic and self-cleaning of organic dyes and tea stains of cotton fabrics

Recently, research activities are focused on development of 2D reduced graphene oxide (rGO) based semiconductor nanocomposite materials for boosting up its catalytic applications. In this work, a rarely reported green synthesis approach has been envisioned to synthesize in-situ 2D rGO-ZnO (rGZn) nanocomposites from Apple juice and zinc acetate. Also the composition of the samples has been optimized to achieve high photocatalytic and self-cleaning properties by the formation of reactive oxidation species. The samples are characterized for their microstructural, optical absorption and photoluminescence properties. It has been tested that rGZn nanocomposites are capable of removing a test dye, namely methylene blue (MB) from water and achieved the highest dye degradation efficiency of ∼91% within only 60 min under UV-vis light irradiation. A smart cotton fabric (CF) coated with rGZn has been prepared and demonstrated its photocatalytic self-cleaning property by degradation of MB, rhodamine B dyes and tea stains on it even under sunlight irradiation, which is scarcely available in the literature. Therefore, this work may open a new avenue of research for low cost and easy synthesis of rGO-semiconductor nanocomposites with high photocatalytic properties for industrial applications as well as for development of rGO based smart fabric for real-life applications.

ZnO Microstructures as Flame-Retardant Coatings on Cotton Fabrics

In this study, we report a unique strategy that utilizes ZnO and ZnS microparticles and rods as fire-retardant materials when coated onto cotton fabrics. ZnO and ZnO/ZnS microparticles or rods were grown or adsorbed to the surface of cotton fibers. Properties such as heat release rate, total smoke release, and mass loss rate of the materials were tested using a cone calorimeter. ZnO and ZnO/ZnS rods were able to reduce the heat release rate and total smoke release from 118 kW/m² and 18.3 m²/m² to about 70.0 kW/m² and 6.00 m²/m², respectively. The maximum average rate of heat emission and fire growth rate index, which is used to evaluate the fire spread rate, the size of the fire, and the propensity of fire development, were improved with these coatings and indicate that there are potential applications of these materials as fire retardants.

A ZnS nanocrystal/reduced graphene oxide composite anode with enhanced electrochemical performances for lithium-ion batteries

A simple route for the preparation of ZnS nanocrystal/reduced graphene oxide (ZnS/RGO) by a hydrothermal synthesis process was achieved. The chemical composition, morphology, and structural characterization reveal that the ZnS/RGO composite is composed of sphalerite-phased ZnS nanocrystals uniformly dispersed on functional RGO sheets with a high specific surface area. The ZnS/RGO composite was utilized as an anode in the construction of a high-performance lithium-ion battery. The ZnS/RGO composite with appropriate RGO content exhibits a high reversible specific capacity (780 mA h g^-1), excellent cycle stability over 100 cycles (71.3% retention), and good rate performance at 2C (51.2% of its capacity when measured at a 0.1C rate). To further investigate this ZnS/RGO anode for practical use in full Li-ion cells, we tested the electrochemical performance of the ZnS/RGO anode at different cut-off voltages for the first time. The presence of RGO plays an important role in providing high conductivity as well as a substrate with a high surface area. This helps alleviate the typically problems associated with volume expansion and shrinkage during prolonged cycling. Additionally, the RGO provides multiple nucleation points that result in a uniformly dispersed film of nanosized ZnS that covers its surface. Thus, the high surface area RGO enables high electronic conductivity and fast charge transfer kinetics for ZnS lithiation/delithiation.

Graphene in Photocatalysis: A Review

In recent years, heterogeneous photocatalysis has received much research interest because of its powerful potential applications in tackling many important energy and environmental challenges at a global level in an economically sustainable manner. Due to their unique optical, electrical, and physicochemical properties, various 2D graphene nanosheets-supported semiconductor composite photocatalysts have been widely constructed and applied in different photocatalytic fields. In this review, fundamental mechanisms of heterogeneous photocatalysis, including thermodynamic and kinetics requirements, are first systematically summarized. Then, the photocatalysis-related properties of graphene and its derivatives, and design rules and synthesis methods of graphene-based composites are highlighted. Importantly, different design strategies, including doping and sensitization of semiconductors by graphene, improving electrical conductivity of graphene, increasing eloectrocatalytic active sites on graphene, strengthening interface coupling between semiconductors and graphene, fabricating micro/nano architectures, constructing multi-junction nanocomposites, enhancing photostability of semiconductors, and utilizing the synergistic effect of various modification strategies, are thoroughly summarized. The important applications including photocatalytic pollutant degradation, H₂ production, and CO₂ reduction are also addressed. Through reviewing the significant advances on this topic, it may provide new opportunities for designing highly efficient 2D graphene-based photocatalysts for various applications in photocatalysis and other fields, such as solar cells, thermal catalysis, separation, and purification.

Enhanced Acetone Sensing Characteristics of ZnO/Graphene Composites

ZnO/graphene (ZnO-G) hybrid composites are prepared via hydrothermal synthesis with graphite, N-methyl-pyrrolidone (NMP), and Zn(NO₃)₂·6H₂O as the precursors. The characterizations, including X-ray diffraction (XRD), thermogravimetric analyses (TGA), Raman spectroscopy, and transmission electron microscopy (TEM) indicate the formation of ZnO-G. Gas sensors were fabricated with ZnO-G composites and ZnO as sensing material, indicating that the response of the ZnO towards acetone was significantly enhanced by graphene doping. It was found that the ZnO-G sensor exhibits remarkably enhanced response of 13.3 at the optimal operating temperature of 280 °C to 100 ppm acetone, an improvement from 7.7 with pure ZnO.

Insight into Biological Effects of Zinc Oxide Nanoflowers on Bacteria: Why Morphology Matters

Zinc oxides have gained exciting achievements in antimicrobial fields because of their advantageous properties, whereas their biological effects on bacteria are currently underexplored. In this study, biological effects of flower-shaped nano zinc oxides on bacteria were systematically investigated. Zinc oxide nanoflowers with controllable morphologies (viz., rod flowers, fusiform flowers, and petal flowers) were synthesized by modulating merely base type and concentration using the hydrothermal process. Their antibacterial power is in an order of petal flowers > fusiform flowers > rod flowers because of their differences in microscopic parameters such as specific surface area, pore size, and Zn-polar plane, etc. More importantly, the role of morphology in influencing biological effect on bacteria was examined, focusing on the morphology-induced effect on integrality of cell wall, permeability of cell membrane, DNA cleavage, etc. As for cytotoxicity, all petal flowers, fusiform flowers, and rod flowers show trivial cytotoxicity to the Hela cells. This work provides a guide for enhancing biological effect of the biocides on pathogenic bacteria by the morphological modulation.