High-Performance Ammonia Electrosynthesis from Nitrate in a NaOH-KOH-H2O Ternary Electrolyte

A glut of dinitrogen-derived ammonia (NH3) over the past century has resulted in a heavily imbalanced nitrogen cycle and consequently, the large-scale accumulation of reactive nitrogen such as nitrates in our ecosystems has led to detrimental environmental issues. Electrocatalytic upcycling of waste nitrogen back into NH3 holds promise in mitigating these environmental impacts and reducing reliance on the energy-intensive Haber-Bosch process. Herein, we report a high-performance electrolyzer using an ultrahigh alkalinity electrolyte, NaOH-KOH-H2O, for low-cost NH3 electrosynthesis. At 3,000 mA/cm2, the device with a Fe-Cu-Ni ternary catalyst achieves an unprecedented faradaic efficiency (FE) of 92.5±1.5 % under a low cell voltage of 3.83 V; whereas at 1,000 mA/cm2, an FE of 96.5±4.8 % under a cell voltage of only 2.40 V was achieved. Techno-economic analysis revealed that our device cuts the levelized cost of ammonia electrosynthesis by ~40 % ($30.68 for Fe-Cu-Ni vs. $48.53 for Ni foam per kmol-NH3). The NaOH-KOH-H2O electrolyte together with the Fe-Cu-Ni ternary catalyst can enable the high-throughput nitrate-to-ammonia applications for affordable and scalable real-world wastewater treatments.

Electrodeposited AgCu Foam Catalysts for Enhanced Reduction of CO2 to CO

Selective electrochemical reduction of CO₂ is an emerging field which needs more active and stable catalysts for its practicability. In this work, we have studied the influence of Ag metal incorporation into Cu dendritic structures on the product distribution and selectivity of CO₂ electroreduction. Bimetallic AgCu foams prepared by hydrogen bubble templated electrodeposition shift the potentials of CO production to more positive values compared to bulk silver. The presence of Ag during the electrodeposition significantly changed the size and the shape of the dendrites in the pore walls of AgCu foams compared to Cu foam. The CO adsorption characteristics are studied by operando Raman spectroscopy. In the presence of Ag, the maximum CO adsorption is observed at a more positive potential. As a result, an improved selectivity for CO is obtained for AgCu foam catalysts at lower overpotentials compared to Cu foam catalyst, evidencing a synergistic effect between the bimetallic components. We were successful in increasing the CO mass activity with respect to the total Ag amount. AgCu foams are found to retain the CO selectivity during long-term operation, and with their easily scalable electrodeposition synthesis they possess high potential for industrial application.

The chemically reduced CuO–Co3O4 composite as a highly efficient electrocatalyst for oxygen evolution reaction in alkaline media

The fabrication of efficient, alkaline-stable and nonprecious electrocatalysts for the oxygen evolution reaction is highly needed; however, it is a challenging task.

Galvanic Replacement of Electrochemically Restructured Copper Electrodes with Gold and Its Electrocatalytic Activity for Nitrate Ion Reduction

The electrochemical formation of nanostructured materials is a cost effective route to creating substrates that can be employed in a variety of applications. In this work the surface of a copper electrode was electrochemically restructured in an alkaline solution containing ethanol as an additive to modify the surface morphology, and generate a Cu/Cu₂O surface, which is known to be active for the electrocatalytic reduction of environmentally harmful nitrate ions. To increase the activity of the nanostructured surface it was decorated with gold prisms through a facile galvanic replacement approach to create an active Cu/Cu₂O/Au layer. The surface was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, as well as electrochemical techniques. It was found that the presence of recalcitrant oxides, and Au was beneficial for the increased activity compared to unmodified copper and undecorated restructured copper and was consistent with the incipient hydrous oxide adatom mediator model of electrocatalysis. This approach to generating nanostructured metal/metal oxide surfaces that can be galvanically replaced to create these types of composites may have other applications in the area of electrocatalysis.

Seawater splitting for hydrogen evolution by robust electrocatalysts from secondary M (M = Cr, Fe, Co, Ni, Mo) incorporated Pt

Water splitting is a promising technique for clean hydrogen energy harvesting. The creation of cost-effective electrocatalysts with improved hydrogen evolution reaction (HER) activity and stability is crucial in realizing persistent hydrogen evolution by reducing the reaction overpotential and minimizing energy consumption. Herein, we present the preparation of alloyed PtM (M = Cr, Fe, Co, Ni, Mo) modified titanium (Ti) mesh by a simple electrodeposition method, aiming at hydrogen generation from seawater splitting. The preliminary results indicate that the Ti/PtM electrodes feature markedly reduced onset overpotentials and Tafel slopes as well as significantly increased exchange current densities compared with pristine Pt electrodes, arising from the incorporation of secondary M atoms into the Pt lattice for alloying effects. Moreover, the competitive dissolution reaction between guest M species to Pt with Cl₂ in seawater is beneficial for enhancing the long-term stability of resultant PtM alloy electrodes. The optimized PtMo alloy electrode maintains 91.13% of the initial current density upon 172 h operation in real seawater, making it promising in practical applications.

Water splitting is a promising technique for clean hydrogen energy harvesting.

Photo-reduced Cu/CuO nanoclusters on TiO2 nanotube arrays as highly efficient and reusable catalyst

Non-noble metal nanoparticles are becoming more and more important in catalysis recently. Cu/CuO nanoclusters on highly ordered TiO₂ nanotube arrays are successfully developed by a surfactant-free photoreduction method. This non-noble metal Cu/CuO-TiO₂ catalyst exhibits excellent catalytic activity and stability for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with the presence of sodium borohydride (NaBH₄). The rate constant of this low-cost Cu/CuO based catalyst is even higher than that of the noble metal nanoparticles decorated on the same TiO₂ substrate. The conversion efficiency remains almost unchanged after 7 cycles of recycling. The recycle process of this Cu/CuO-TiO₂ catalyst supported by Ti foil is very simple and convenient compared with that of the common powder catalysts. This catalyst also exhibited great catalytic activity to other organic dyes, such as methylene blue (MB), rhodamine B (RhB) and methyl orange (MO). This highly efficient, low-cost and easily reusable Cu/CuO-TiO₂ catalyst is expected to be of great potential in catalysis in the future.

Simple electrochemical synthesis of an Au–Ag–Cu trimetallic nanodendrite and its use as a SERS substrate

An Au–Ag–Cu trimetallic nanodendrite was constructed by simple electrochemical methods and was evaluated as a surface enhanced Raman scattering (SERS) substrate.

Synthesis of bifunctional reduced graphene oxide/CuS/Au composite nanosheets for in situ monitoring of a peroxidase-like catalytic reaction by surface-enhanced Raman spectroscopy

In this work, we have demonstrated the synthesis of bifunctional reduced graphene oxide/CuS/Au composite nanosheets for in situ monitoring of peroxidase-like catalytic reaction by surface-enhanced Raman spectroscopy.

Electrochemical synthesis of fractal bimetallic Cu/Ag nanodendrites for efficient surface enhanced Raman spectroscopy

A schematic illustration of the electrochemical synthesis of fractal bimetallic Cu/Ag nanodendrites for efficient surface enhanced Raman spectroscopy.

Building with bubbles: the formation of high surface area honeycomb-like films via hydrogen bubble templated electrodeposition

While the evolution of hydrogen gas is often a troublesome process accompanying electrodeposition, this feature can be exploited to template the growth of highly porous surfaces. This process, known as the dynamic hydrogen bubble template (DHBT) method, can be utilised to create a wide range of macroporous films with nanostructured pore walls. This feature article presents an overview of the status of the DHBT technique, highlighting preparation techniques and emerging applications.

Generation of catalytically active materials from a liquid metal precursor

A facile route to prepare catalytically active materials from a liquid metal alloy is introduced. Sonication of liquid galinstan (GaInSn) in alkaline solution or treating it with reducing agents generates In : Sn rich microspheres that are catalytically active for electron transfer reactions such as potassium ferricyanide and 4-nitrophenol reduction.

Novel Cu–Ag bimetallic porous nanomembrane prepared from a multi-component metallic glass

Cu–Ag bimetallic porous nanomembranes, prepared by chemical dealloying assisted with ultrasonic vibration, exhibit thicknesses of ∼5 to 50 nm, pore diameters of ∼10 to 20 nm and ligament feature sizes of ∼30 to 50 nm.