pH-responsive membranes: Mechanisms, fabrications, and applications

Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The pH-responsive membranes (PRMs) are particular categories of membranes that have an amazing aptitude to change their properties such as permeability, selectivity and surface charge in response to changes in pH levels. This review provides a brief introduction to mechanisms of pH-responsiveness in polymers and categorizes the applied polymers and functional groups. After that, different techniques for fabricating pH-responsive membranes such as grafting, the blending of pH-responsive polymers/microgels/nanomaterials, novel polymers and graphene-layered PRMs are discussed. The application of PRMs in different processes such as filtration membranes, reverse osmosis, drug delivery, gas separation, pervaporation and self-cleaning/antifouling properties with perspective to the challenges and future progress are reviewed. Lastly, the development and limitations of PRM fabrications and applications are compared to provide inclusive information for the advancement of next-generation PRMs with improved separation and filtration performance.

Purifying water with silver nanoparticles (AgNPs)-incorporated membranes: Recent advancements and critical challenges

In the face of the growing global water crisis, membrane technology is a promising means of purifying water and wastewater. Silver nanoparticles (AgNPs) have been widely used to improve membrane performance, for antibiofouling, and to aid in photocatalytic degradation, thermal response, and electro-conductivity. However, several critical issues such as short antimicrobial periods, trade-off effects and silver inactivation seriously restrict the engineering application of AgNPs-incorporated membranes. In addition, there is controversy around the use of AgNPs given the toxic preparation process and environmental/biological risks. Hence, it is of great significance to summarize and analyze the recent developments and critical challenges in the use of AgNPs-incorporated membranes in water and wastewater treatment, and to propose potential solutions. We reviewed the different properties and functions of AgNPs and their corresponding applications in AgNPs-incorporated membranes. Recently, multifunctional, novel AgNP-incorporated membranes combined with other functional materials have been developed with high-performance. We further clarified the synergistic mechanisms between AgNPs and these novel nanomaterials and/or polymers, and elucidated their functions and roles in membrane separation. Finally, the critical challenges of AgNPs-incorporated membranes and the proposed solutions were outlined: i) Prolonging the antimicrobial cycle through long-term and controlled AgNPs release; ii) Overcoming the trade-off effect and organic fouling of the AgNPs-incorporated membranes; iii) Preparation of sustainable AgNPs-incorporated membranes; iv) Addressing biotoxicity induced by AgNPs; and v) Deactivation of AgNPs-incorporated membrane. Overall, this review provides a comprehensive discussion of the advancements and challenges of AgNPs-incorporated membranes and guides the development of more robust, multi-functional and sustainable AgNPs-incorporated membranes.

Porous block copolymer separation membranes for 21st century sanitation and hygiene

Removing hazardous particulate and macromolecular contaminants as well as viruses with sizes from a few nm up to the 100 nm-range from water and air is crucial for ensuring sufficient sanitation and hygiene for a growing world population. To this end, high-performance separation membranes are needed that combine high permeance, high selectivity and sufficient mechanical stability under operating conditions. However, design features of separation membranes enhancing permeance reduce selectivity and vice versa. Membrane configurations combining high permeance and high selectivity suffer in turn from a lack of mechanical robustness. These problems may be tackled by using block copolymers (BCPs) as a material platform for the design of separation membranes. BCPs are macromolecules that consist of two or more chemically distinct block segments, which undergo microphase separation yielding a wealth of ordered nanoscopic domain structures. Various methods allow the transformation of these nanoscopic domain structures into customized nanopore systems with pore sizes in the sub-100 nm range and with narrow pore size distributions. This tutorial review summarizes design strategies for nanoporous state-of-the-art BCP separation membranes, their preparation, their device integration and their use for water purification.

Selective Swelling and Functionalization of Integral Asymmetric Isoporous Block Copolymer Membranes

SNIPS stands for a membrane fabrication technique that combines the evaporation induced self-assembly of the block copolymers and the classical nonsolvent induced phase separation. It is a one-step readily scalable technique to fabricate integral asymmetric isoporous membranes. The prominent developments in the last decade have carved out a niche for SNIPS as a potential technique to fabricate next generation isoporous membranes. In the last decade, a rich polymer library and variety of membrane postmodification routes have been successfully implemented to fabricate SNIPS membranes having the desired pore functionality. Some of these membranes form soft nanochannels in hydrated state due to swelling of the pore wall, i.e., the pore forming block of the block copolymer. These membranes having soft nanochannels have demonstrated the potential to perform several challenging separation tasks in ultrafiltration and nanofiltration. This paper highlights the currently accessible pore functionality, the strategies to tune the swelling of the soft nanochannels, the potential applications, and future perspectives of these membranes.

Chemically Tailored Multifunctional Asymmetric Isoporous Triblock Terpolymer Membranes for Selective Transport

Membrane-based separation of organic molecules with 1-2 nm lateral dimensions is a demanding but rather underdeveloped technology. The major challenge is to fabricate membranes having distinct nanochannels with desired functionality. Here, a bottom-up strategy to produce such a membrane using a tailor-made triblock terpolymer featuring miscible end blocks with two different functional groups is demonstrated. A scalable multifunctional integral asymmetric isoporous membrane is fabricated by the solvent evaporation-induced self-assembly of the block copolymer combined with nonsolvent-induced phase separation. The membrane nanopores are readily functionalized using positively and negatively charged moieties by two straightforward gas-solid reactions. The pores of the post-functionalized membranes act as target-specific functional soft nanochannels due to swelling of the polyelectrolyte blocks in a hydrated state. The membranes show unprecedented separation selectivity of small molecules based on size and/or charge which demonstrates the potential of the proposed strategy to prepare next-generation nanofiltration membranes.

One-Pot Synthesis of a Zwitterionic Small Molecule Bearing Disulfide Moiety for Antibiofouling Macro- and Nanoscale Gold Surfaces

The goal of this study is to develop a simple one-pot method for the synthesis of a zwitterionic small molecule bearing disulfide moiety, which can effectively inhibit nonspecific protein adsorption on macroscopic and nanoscopic gold surfaces. To this end, the optimal molecular structure of a pyridine disulfide derivative was explored and a zwitterionic small molecule was successfully synthesized from the tertiary amine residue on the pyridine ring through a one-pot method. The coating conditions of the synthesized zwitterionic molecules on the gold surface were optimized through contact angle measurements, and the strong interactions between the gold surface and the disulfide moiety of the zwitterion small molecule were confirmed by surface plasmon resonance (SPR) analysis and X-ray photoelectron spectroscopy. The antibiofouling properties of the coated gold surface were analyzed by fluorescence microscopic observations after contacting with FITC-labeled bovine serum albumin (BSA) and SPR sensor as contacting with BSA solution. In addition, the effect of zwitterion-coating on the salt stability of and protein adsorption on nanoscopic gold surfaces were examined through a NaCl stability test and BSA adsorption test, respectively. From the obtained results, it was confirmed that the simply synthesized zwitterionic small molecule was effective in inhibiting nonspecific protein adsorption on macroscopic and nanoscopic gold surfaces; further, it enhanced the salt stability of gold nanoparticle surfaces.

Anti-biofouling function of amorphous nano-Ta2O5 coating for VO2-based intelligent windows

From environmental and health perspectives, the acquisition of a surface anti-biofouling property holds important significance for the usability of VO₂ intelligent windows. Herein, we firstly deposited amorphous Ta₂O₅ nanoparticles on VO₂ film by the magnetron sputtering method. It was found that the amorphous nano-Ta₂O₅ coating possessed a favorable anti-biofouling capability against Pseudomonas aeruginosa as an environmental microorganism model, behind which lay the mechanism that the amorphous nano-Ta₂O₅ could interrupt the microbial membrane electron transport chain and significantly elevate the intracellular reactive oxygen species (ROS) level. A plausible relationship was established between the anti-biofouling activity and physicochemical nature of amorphous Ta₂O₅ nanoparticles from the perspective of defect chemistry. ROS-induced oxidative damage gave rise to microbial viability loss. In addition, the amorphous nano-Ta₂O₅ coating can endow VO₂ with favorable cytocompatibility with human skin fibroblasts. This study may provide new insights into understanding the anti-biofouling and antimicrobial actions of amorphous transition metal oxide nanoparticles, which is conducive to expanding their potential applications in environmental fields.

From pH- to Light-Response: Postpolymerization Modification of Polymer Brushes Grafted onto Microporous Polymeric Membranes

A microporous pH- and light-responsive membrane that enables remote control over its interfacial properties has been fabricated. pH-Responsiveness was imparted to a porous polypropylene film via grafting of poly(methacrylic acid) brushes from the substrate using argon-plasma-induced free-radical graft polymerization. Morphological changes as a function of grafting level were analyzed using atomic force microscopy. Conversion into a light-responsive membrane was performed via postpolymerization modification to covalently attach photochromic spiropyran moieties to the grafted polymer brushes. Reversible switches in wettability and permeability were determined upon changing from acidic to basic pH or upon alternating UV- and visible-light irradiation. Additionally, light-responsive membranes show a switch in color upon UV exposure.

A self-defensive antibacterial coating acting through the bacteria-triggered release of a hydrophobic antibiotic from layer-by-layer films

Drug delivery systems play important roles in the construction of antibacterial coatings on the surfaces of biomaterials. However, excessive release of antibiotics in the environment can lead to the generation of resistant bacteria. A methoxy poly(ethylene glycol)-poly(ε-caprolactone)-chitosan (MPEG-PCL-CS) block polymer was prepared through covalent grafting of CS onto MPEG-PCL. MPEG-PCL-CS micelles were prepared and showed a high load capacity for the hydrophobic antibiotic triclosan (TCA) (∼5 wt%). Multilayer films were constructed through self-assembling TCA/MPEG-PCL-CS cationic micelles with poly(acrylic acid) (PAA). Transmission and scanning electron microscopy analyses confirmed the presence of micelles on the surface (20-40 nm). As barriers for the antibiotic, the (TCA/MPEG-PCL-CS)/PAA multilayer films contained a high load of TCA (255 μg cm-2). Importantly, the multilayer films showed both bacteria-triggered and pH-responsive release properties and can be used as self-defensive antibacterial coatings. Bacterial adhesion caused a local acidic environment and altered the permeability of the multilayer films, promoting drug release. Both in vitro and in vivo antibacterial tests indicated a high bactericidal activity of drug-loaded multilayer films against both E. coli and S. aureus.

A sulfonated polymer membrane with Ag-based graft: morphology, characterization, antimicrobial activity and interception ability

Ag-based nano-graft can impart broad-spectrum antimicrobial activity to a polymer membrane and enhance its anti-fouling capacity effectively.

Free-standing thermo-responsive nanoporous membranes from high molecular weight PS-PNIPAM block copolymers synthesized via RAFT polymerization

Free-standing, fully reversible thermo-responsive nanoporous membranes were fabricated from PS-PNIPAM block copolymers.

Enhanced hydrophilic and antifouling polyacrylonitrile membrane with polydopamine modified silica nanoparticles

Hydrophilic and antifouling polydopamine modified silica nanoparticles-polyacrylonitrile membranes were fabricated for water purification applications. High dispersion and better compatibility of modified nanoparticles with polyacrylonitrile was observed.

Self-assembly of an interacting binary blend of diblock copolymers in thin films: a potential route to porous materials with reactive nanochannel chemistry

Self-assembly of a binary mixture of poly(styrene)336-block-poly(4-vinyl pyridine)25 (PS336-b-P4VP25) and poly(ethylene glycol)113-block-poly(4-hydroxy styrene)25 (PEG113-b-P4HS25) is shown to give rise to a cylindrical morphology in thin films through pyridine/phenol-based hetero-complementary hydrogen bonding interactions between the P4VP and P4HS copolymer segments. Removal of the cylindrical phase (PEG-b-P4HS) allowed access to porous materials having a pore surface decorated with P4VP polymer blocks. These segments could be transformed into cationic polyelectrolytes through quaternization of the pyridine nitrogen atom. The resulting positively charged nanopore surface could recognize negatively charged gold nanoparticles through electrostatic interactions. This work, therefore, outlines the utility of the supramolecular AB/CD type of block copolymer towards preparation of ordered porous thin films carrying a chemically defined channel surface with a large number of reactive sites.

Thermo responsive ultrafiltration membranes of grafted poly(N-isopropyl acrylamide) via polydopamine

Thermoresponsive membranes with good antifouling ability and rejection performance were prepared via mussel inspired PNIPAm grafting.