Polydopamine-Functionalized Strontium Alginate/Hydroxyapatite Composite Microhydrogel Loaded with Vascular Endothelial Growth Factor Promotes Bone Formation and Angiogenesis

Critical-size bone defects are a common and intractable clinical problem that typically requires filling in with surgical implants to facilitate bone regeneration. Considering the limitations of autologous bone and allogeneic bone in clinical applications, such as secondary damage or immunogenicity, injectable microhydrogels with osteogenic and angiogenic effects have received considerable attention. Herein, polydopamine (PDA)-functionalized strontium alginate/nanohydroxyapatite (Sr-Alg/nHA) composite microhydrogels loaded with vascular endothelial growth factor (VEGF) were prepared using microfluidic technology. This composite microhydrogel released strontium ions stably for at least 42 days to promote bone formation. The PDA coating can release VEGF in a controlled manner, effectively promote angiogenesis around bone defects, and provide nutritional support for new bone formation. In in vitro experiments, the composite microhydrogels had good biocompatibility. The PDA coating greatly improves cell adhesion on the composite microhydrogel and provides good controlled release of VEGF. Therefore, this composite microhydrogel effectively promotes osteogenic differentiation and vascularization. In in vivo experiments, composite microhydrogels were injected into critical-size bone defects in the skull of rats, and they were shown by microcomputed tomography and tissue sections to be effective in promoting bone regeneration. These findings demonstrated that this novel microhydrogel effectively promotes bone formation and angiogenesis at the site of bone defects.

Graphite nanopowder incorporated xanthan gum scaffold for effective bone tissue regeneration purposes with improved biomineralization

In the current work, biomaterial composed of Xanthan gum and Diethylene glycol dimethacrylate with impregnation of graphite nanopowder filler in their matrices was fabricated successfully for their potential usage in the engineering of bone defects. Various physicochemical properties associated with the biomaterial were characterized using FTIR, XRD, TGA, SEM etc. The biomaterial rheological studies imparted the better notable properties associated with the inclusion of graphite nanopowder. The biomaterial synthesized exhibited a controlled drug release. Adhesion and proliferation of different secondary cell lines do not generate ROS on the current biomaterial and thus show its biocompatibility and non-toxic nature. The synthesized biomaterial's osteogenic potential on SaOS-2 cells was supported by increased ALP activity, enhanced differentiation and biomineralization under osteoinductive circumstances. The current biomaterial demonstrates that in addition to the drug-delivery applications, it can also be a cost-effective substrate for cellular activities and has all the necessary properties to be considered as a promising alternative material suitable for repairing and restoring bone tissues. We propose that this biomaterial may have commercial importance in the biomedical field.

Advanced injectable hydrogels for bone tissue regeneration

Diseases or defects of the skeleton are hazardous because of their specificity and intricacy. Bone tissue engineering has become an important area of research that offers promising new tools for making biomimetic hydrogels that can be used to treat bone diseases. New hydrogels with a distinctive 3D network structure, high water content, and functional capabilities are ranked among the most promising candidates for bone tissue engineering. This makes them helpful in treating cartilage injury, skull deformity, and arthritis. This review will briefly introduce the variety of biocompatible functional hydrogels used in cell culture and bone tissue regeneration. Many gel design concepts, such as crosslinking procedures, controlled release properties, and alternative bionic methodology, were stressed regarding injectable hydrogels to form bone tissue. Hydrogels manufactured from biocompatible materials are a promising option for minimally invasive surgery because of their adaptable physicochemical qualities, ability to fill irregularly shaped defect sites, and ability to grow hormones or release drugs in response to external stimuli. Also included in this overview is a quick rundown of the more practical designs employed in treating bone disorders. Essential details on injectable hydrogel scaffolds for bone tissue regeneration are described in this article.

In-situ forming hydrogel based on thiolated chitosan/carboxymethyl cellulose (CMC) containing borate bioactive glass for wound healing

Suitable wound dressings for accelerating wound healing are actively being designed and synthesised. In this study, thiolated chitosan (tCh)/oxidized carboxymethyl cellulose (OCMC) hydrogel containing Cu-doped borate bioglass (BG) was developed as a wound dressing to improve wound healing in a full-thickness skin defect of mouse animal model. Thiolation was used to incorporate thiol groups into chitosan (Ch) to enhance its water solubility and mucoadhesion characteristics. Here, the in situ forming hydrogel was successfully developed using the Schiff-based reaction, and its physio-chemical and antibacterial characteristics were examined. Borate BG was also incorporated in the generated hydrogel to promote angiogenesis and tissue regeneration at the wound site. Investigations of in vitro cytotoxicity assays demonstrated that the synthesised hydrogels showed good biocompatibility and promoted cell growth. These results inspired us to investigate the effectiveness of skin wound healing in a mouse model. On the backs of animals, two full-thickness wounds were created and treated utilising two different treatment conditions: (1) OCMC/tCh hydrogel, (2) OCMC/tCh/borate BG, and (3) control defect. The wound closure ratio, collagen deposition, and angiogenesis activity were measured after 14 days to determine the healing efficacy of the in situ hydrogels used as wound dressings. Overall, the hydrogel containing borate BG was maintained in the defect site, healing efficiency was replicable, and wound healing was apparent. In conclusion, we found consistent angiogenesis, remodelling, and accelerated wound healing, which we propose may have beneficial effects on the repair of skin defects.

Bone tumors effective therapy through functionalized hydrogels: current developments and future expectations

Primary bone tumors especially, sarcomas affect adolescents the most because it originates from osteoblasts cells responsible for bone growth. Chemotherapy, surgery, and radiation therapy are the most often used clinical treatments. Regrettably, surgical resection frequently fails to entirely eradicate the tumor, which is the primary cause of metastasis and postoperative recurrence, leading to a high death rate. Additionally, bone tumors frequently penetrate significant regions of bone, rendering them incapable of self-repair, and impairing patients' quality of life. As a result, treating bone tumors and regenerating bone in the clinic is difficult. In recent decades, numerous sorts of alternative therapy approaches have been investigated due to a lack of approved treatments. Among the novel therapeutic approaches, hydrogel-based anticancer therapy has cleared the way for the development of new targeted techniques for treating bone cancer and bone regeneration. They include strategies such as co-delivery of several drug payloads, enhancing their biodistribution and transport capabilities, normalizing accumulation, and optimizing drug release profiles to decrease the limitations of current therapy. This review discusses current advances in functionalized hydrogels to develop a new technique for treating bone tumors by reducing postoperative tumor recurrence and promoting tissue repair.

Fabrication of oxidized sodium alginate-collagen heterogeneous bilayer barrier membrane with osteogenesis-promoting ability

Guided bone regeneration technique is an effective approach to repair bone defects, in which a barrier membrane is essential. However, the collagen barrier membranes commonly used lose stability quickly, leading to connective tissue invasion and failure of osteogenesis. Herein, we presented an oxidized sodium alginate (OSA)-collagen heterogeneous bilayer barrier membrane with well-controlled pore size and osteogenesis-promoting ability. The OSA crosslinking significantly improved the structural stability, compressive strength, swelling behavior, and slowed down the biodegradation rate of collagen membranes. Meanwhile, the collagen-based membranes exhibited superior cytocompatibility, osteogenesis-promotion, and barrier function against fibroblasts. Especially, the osteogenic differentiation was most promoted on the membrane with a large pore size (240-310 μm), while the barrier function was most improved on the membrane with a small pore size (30-60 μm). Then the above two membranes were combined together to obtain a heterogeneous bilayer membrane. This bilayer barrier membrane showed excellent osteogenesis-promoting ability in rats.

Effect of Dialdehyde Carboxymethyl Cellulose Cross-Linking on the Porous Structure of the Collagen Matrix

Porous structures are essential for some collagen-based biomaterials and can be regulated by crosslinkers. Herein, dialdehyde carboxymethyl cellulose (DCMC) crosslinkers with similar size but different aldehyde group contents were prepared through periodate oxidation of sodium carboxymethyl cellulose with varying degrees of substitution (DS). They can penetrate into the hierarchy of fibril and form inter-molecular and intra-fibril cross-linking within the collagen matrix due to their nanoscale sizes and reactive aldehyde groups. The collagen matrices possessed higher porosity, significantly greater proportion of large pores (Φ > 10 μm), and shorter D-periodicity after cross-linking, showing greater potential for biomedical applications. In addition, the crosslinked collagen matrices showed satisfactory biocompatibility and biodegradation. The decreased DS of carboxymethyl cellulose, which led to the increased aldehyde content of corresponding DCMC, brought about an enhanced cross-linking degree, porosity, and proportion of large pores of the crosslinked collagen matrix. DCMC dosage of 6% was sufficient for cross-linking and pore formation. Excess DCMC would physically deposit in the matrix and decrease the porosity instead. Therefore, the desired pore properties of the collagen matrix could be obtained by regulating the structure of DCMC and thereby achieving the required functions of the biomaterial.

Smart pH-Sensitive Hydrogel Based on the Pineapple Peel-Oxidized Hydroxyethyl Cellulose and the Hericium erinaceus Residue Carboxymethyl Chitosan for Use in Drug Delivery

Pineapple and hericium erinaceus (HE) produce a lot of residues in the process of food processing. These processed residues are good potential derivative precursors. In this investigation, a simple and non-toxic method was developed to prepare one new composite hydrogel by the Schiff base reaction between the aldehyde group of oxidized hydroxyethyl cellulose (OHEC) from processed pineapple peel residue and the amino group of carboxymethyl chitosan (CMCS) from processed HE residue. Subsequently, a series of experiments toward these new hydrogel polymers including structure characterization and performances were applied. The resultant hydrogel polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy and confirmed with thermogravimetry. It was observed that the modification of cellulose and chitin was adequate, and the synthesis of OHEC/CMCS hydrogel polymers was successful. The gelation time experiments indicated that the shortest gel time was 33 s at a mass ratio of 4:6 (OHEC-70:CMCS). The hydrogel showed good swelling properties. The maximum swelling rate reached 11.58 g/g, and the swelling rate decreased with the increase of the oxidation degree of OHEC. The drug delivery applications of the prepared hydrogel were evaluated with bovine serum albumin (BSA) as a model drug releasing in vitro. It was discovered that the BSA release from the hydrogel was pH sensitive under simulated gastrointestinal conditions. All of these attributes indicate that the novel prepared hydrogel polymers have the potential as good carriers for oral delivery of protein-type drugs.

Synthesis and characterization of electroconductive hydrogels based on oxidized alginate and polypyrrole-grafted gelatin as tissue scaffolds

Electroconductive biocompatible hydrogels with tunable properties have extensively been taken into account in tissue engineering applications due to their potential to provide suitable microenvironmental responses for the cells. In the present study, novel electroconductive hydrogels are designed and synthesized by reacting oxidized alginate with polypyrrole-grafted gelatin copolymer (PPy-g-gelatin) via formation of a Schiff-base linkage. The influence of the composition and the concentration of the components on the compressive modulus and functional performance of the hydrogels is investigated. The conductivity of the hydrogels measured by a two-probe method increased by increasing the level of polypyrrole-grafted gelatin, and a conductivity of 0.7753 S m^-1 was exhibited by the hydrogel composed of 8% w/v polypyrrole-grafted gelatin (oxidized alginate:gelatin:polypyrrole-grafted gelatin; 30 : 35 : 35% v/v). The hydrogel compressive modulus was shown to be enhanced by increasing the total concentration of hydrogel. The characteristic features of the prepared hydrogels, including swelling ratio, volume fraction, cross-link density, and mesh size, are also studied and analyzed. Besides, the conductive hydrogels have a smaller mesh size and higher cross-link density than the non-conductive hydrogels. However, the hydrogels with high cross-link density, small mesh size, and large pore size presented higher electroconductivity as a result of easier movement of the ions throughout the hydrogel. These conductive hydrogels exhibited electrical conductivity and biodegradability with cell viability, implying potential as scaffolds for tissue engineering.

Bio-hybrid hydrogel comprising collagen-capped silver nanoparticles and melatonin for accelerated tissue regeneration in skin defects

Hydrogel-based drug delivery systems have emerged as a promising platform for chronic tissue defects owing to their inherent ability to inhibit pathogenic infection and accelerate rapid tissue regeneration. Here, we fabricated a stable bio-hybrid hydrogel system comprising collagen, aminated xanthan gum, bio-capped silver nanoparticles and melatonin with antimicrobial, antioxidant and anti-inflammatory properties. Highly colloidal bio-capped silver nanoparticles were synthesized using collagen as a reducing cum stabilizing agent for the first time while aminated xanthan gum was synthesized using ethylenediamine treatment on xanthan gum. The synthesized bio-hybrid hydrogel exhibits better gelation, surface morphology, rheology and degelation properties. In vitro assessment of bio-hybrid hydrogel demonstrates excellent bactericidal efficiency against both common wound and multidrug-resistant pathogens and biocompatibility properties. In vivo animal studies demonstrate rapid tissue regeneration, collagen deposition and angiogenesis at the wound site predominantly due to the synergistic effect of silver nanoparticles and melatonin in the hydrogel. This study paves the way for developing biologically functional bio-nano hydrogel systems for promoting effective care for various ailments, including infected chronic wounds.

Nanocellulose-Based Scaffolds for Chondrogenic Differentiation and Expansion

Nanocellulose deserves special attention among the large group of biocompatible biomaterials. It exhibits good mechanical properties, which qualifies it for potential use as a scaffold imitating cartilage. However, the reconstruction of cartilage is a big challenge due to this tissue's limited regenerative capacity resulting from its lack of vascularization, innervations, and sparsely distributed chondrocytes. This feature restricts the infiltration of progenitor cells into damaged sites. Unfortunately, differentiated chondrocytes are challenging to obtain, and mesenchymal stem cells have become an alternative approach to promote chondrogenesis. Importantly, nanocellulose scaffolds induce the differentiation of stem cells into chondrocyte phenotypes. In this review, we present the recent progress of nanocellulose-based scaffolds promoting the development of cartilage tissue, especially within the emphasis on chondrogenic differentiation and expansion.

Malleable Hydrogel Embedded with Micellar Cargo-Expellers as a Prompt Transdermal Patch

Although hydrogels are promising transdermal patches, they face spatiotemporal problems related to controlled drug release. From the "spatio" perspective, hydrogels are not malleable, therefore they do not fully contact curved skin, such as that found on the nose and fingers. From the "temporal" perspective, the internal network of a hydrogel retards cargo release. Herein, a malleable and rapid-cargo-releasing poly(vinyl alcohol)-borax hydrogel that embeds freely mobile poly(hydroxyethyl methacrylate) (PHEMA) micelles is prepared. The in situ polymerization of PHEMA within the matrix produces large compound micelle particles that are not bound by the matrix. The micelles act as expellers by sweeping out cargo upon exposure to wet conditions through a concentration gradient. The hydrogel embedded with the micellar cargo-expellers delivers a 25-fold larger 3-min release quantity of Nile Red (a model cargo) than the control hydrogel. The particles absorb mechanical shocks and the dynamic borate-diol bonds engender the hydrogel with self-healing properties, which results in a hydrogel that tightly contacts highly curved skin. Moreover, the hydrogel shows no toxicity in in vivo and skin irritation tests. This malleable hydrogel will inspire novel prompt skin-patch systems for pharmaceutical and cosmetics purposes.

In situ-forming, mechanically resilient hydrogels for cell delivery

Injectable, in situ-forming hydrogels can improve cell delivery in tissue engineering applications by facilitating minimally invasive delivery to irregular defect sites and improving cell retention and survival. Tissues targeted for cell delivery often undergo diverse mechanical loading including high stress, high strain, and repetitive loading conditions. This review focuses on the development of hydrogel systems that meet the requirements of mechanical resiliency, cytocompatibility, and injectability for such applications. First, we describe the most important design considerations for maintaining the viability and function of encapsulated cells, for reproducing the target tissue morphology, and for achieving degradation profiles that facilitate tissue replacement. Models describing the relationships between hydrogel structure and mechanical properties are described, focusing on design principles necessary for producing mechanically resilient hydrogels. The advantages and limitations of current strategies for preparing cytocompatible, injectable, and mechanically resilient hydrogels are reviewed, including double networks, nanocomposites, and high molecular weight amphiphilic copolymer networks. Finally, challenges and opportunities are outlined to guide future research in this developing field.

A tumor responsive self healing prodrug hydrogel enables synergistic action of doxorubicin and miltefosine for focal combination chemotherapy

Targeted therapy that facilitates the on-site, on-demand action of drug combinations is a promising approach for combination chemotherapy.

Functional Hydrogels With Tunable Structures and Properties for Tissue Engineering Applications

Tissue engineering (TE) has been used as an attractive and efficient process to restore the original tissue structures and functions through the combination of biodegradable scaffolds, seeded cells, and biological factors. As a unique type of scaffolds, hydrogels have been frequently used for TE because of their similar 3D structures to the native extracellular matrix (ECM), as well as their tunable biochemical and biophysical properties to control cell functions such as cell adhesion, migration, proliferation, and differentiation. Various types of hydrogels have been prepared from naturally derived biomaterials, synthetic polymers, or their combination, showing their promise in TE. This review summarizes the very recent progress of hydrogels used for TE applications. The strategies for tuning biophysical and biochemical properties, and structures of hydrogels are first introduced. Their influences on cell functions and promotive effects on tissue regeneration are then highlighted.

Multifunctional smart hydrogels: potential in tissue engineering and cancer therapy

In recent years, clinical applications have been proposed for various hydrogel products. Hydrogels can be derived from animal tissues, plant extracts and/or adipose tissue extracellular matrices; each type of hydrogel presents significantly different functional properties and may be used for many different applications, including medical therapies, environmental pollution treatments, and industrial materials. Due to complicated preparation techniques and the complexities associated with the selection of suitable materials, the applications of many host-guest supramolecular polymeric hydrogels are limited. Thus, improvements in the design and construction of smart materials are highly desirable in order to increase the lifetimes of functional materials. Here, we summarize different functional hydrogels and their varied preparation methods and source materials. The multifunctional properties of hydrogels, particularly their unique ability to adapt to certain environmental stimuli, are chiefly based on the incorporation of smart materials. Smart materials may be temperature sensitive, pH sensitive, pH/temperature dual sensitive, photoresponsive or salt responsive and may be used for hydrogel wound repair, hydrogel bone repair, hydrogel drug delivery, cancer therapy, and so on. This review focuses on the recent development of smart hydrogels for tissue engineering applications and describes some of the latest advances in using smart materials to create hydrogels for cancer therapy.

Chemical Synthesis of Biomimetic Hydrogels for Tissue Engineering

Owing to the high water content, porous structure, biocompatibility and tissue-like viscoelasticity, hydrogels have become attractive and promising biomaterials for use in drug delivery, 3D cell culture and tissue engineering applications. Various chemical approaches have been developed for hydrogel synthesis using monomers or polymers carrying reactive functional groups. For in vivo tissue repair and in vitro cell culture purposes, it is desirable that the crosslinking reactions occur under mild conditions, do not interfere with biological processes and proceed at high yield with exceptional selectivity. Additionally, the cross-linking reaction should allow straightforward incorporation of bioactive motifs or signaling molecules, at the same time, providing tunability of the hydrogel microstructure, mechanical properties, and degradation rates. In this review, we discuss various chemical approaches applied to the synthesis of complex hydrogel networks, highlighting recent developments from our group. The discovery of new chemistries and novel materials fabrication methods will lead to the development of the next generation biomimetic hydrogels with complex structures and diverse functionalities. These materials will likely facilitate the construction of engineered tissue models that may bridge the gap between 2D experiments and animal studies, providing preliminary insight prior to in vivo assessments.

Hydrogel based cartilaginous tissue regeneration: recent insights and technologies

Hydrogel based technologies has been extensively employed in both exploratory research and clinical applications to address numerous existing challenges in the regeneration of articular cartilage and intervertebral disc.

Injectable and 3D Bioprinted Polysaccharide Hydrogels: From Cartilage to Osteochondral Tissue Engineering

Biomechanical performance of functional cartilage is executed by the exclusive anisotropic composition and spatially varying intricate architecture in articulating ends of diarthrodial joint. Osteochondral tissue constituting the articulating ends comprise superfical soft cartilage over hard subchondral bone sandwiching interfacial soft-hard tissue. The shock-absorbent, lubricating property of cartilage and mechanical stability of subchondral bone regions are rendered by extended chemical structure of glycosaminoglycans and mineral deposition, respectively. Extracellular matrix glycosaminoglycans analogous polysaccharides are major class of hydrogels investigated for restoration of functional cartilage. Recently, injectable hydrogels have gained momentum as it offers patient compliance, tunable mechanical properties, cell deliverability, and facile administration at physiological condition with long-term functionality and hyaline cartilage construction. Interestingly, facile modifiable functional groups in carbohydrate polymers impart tailorability of desired physicochemical properties and versatile injectable chemistry for the development of highly potent biomimetic in situ forming scaffold. The scaffold design strategies have also evolved from single component to bi- or multilayered and graded constructs with osteogenic properties for deep subchondral regeneration. This review highlights the significance of polysaccharide structure-based functions in engineering cartilage tissue, injectable chemistries, strategies for combining analogous matrices with cells/stem cells and biomolecules and multicomponent approaches for osteochondral mimetic constructs. Further, the rheology and precise spatiotemporal positioning of cells in hydrogel bioink for rapid prototyping of complex three-dimensional anisotropic cartilage have also been discussed.

Synthesis of bio-based aldehyde from seaweed polysaccharide and its interaction with bovine serum albumin

Here, we demonstrate a successful synthesis of bio-based aldehyde namely dialdehyde-carboxymethylagarose (DCMA) using carboxymethyagarose (CMA). Further reaction parameters (i.e. reaction temperature, pH and periodate concentration) were optimized to achieve maximum aldehyde content and product yield. The synthesis of DCMA was confirmed by employing FTIR, (1)H NMR, XRD, SEM, AFM, TGA, DSC, EA and GPC techniques. To investigate the aldehyde functionality, DCMA was allowed to interact with BSA and obtained results were found to be comparable with that of synthetic aldehyde (Formaldehyde). Further interaction of DCMA with BSA was confirmed by using UV-vis, FTIR, fluorescent spectroscopy, CD and DLS analysis. Results of this study revealed that bio-based aldehyde behaves like formaldehyde. This study adds value to abundant marine biopolymers and opens the new research area for polymer researchers.

Design, fabrication and characterization of oxidized alginate–gelatin hydrogels for muscle tissue engineering applications

In this study, we reported the preparation of self cross-linked oxidized alginate–gelatin hydrogels for muscle tissue engineering. The effect of oxidation degree (OD) and oxidized alginate/gelatin (OA/GEL) weight ratio were examined and the results showed that in the constant OA/GEL weight ratio, both cross-linking density and Young’s modulus enhanced by increasing OD due to increment of aldehyde groups. Furthermore, the degradation rate was increased with increasing OD probably due to decrement in alginate molecular weight during oxidation reaction facilitated degradation of alginate chains. MTT cytotoxicity assays performed on Wharton's Jelly-derived umbilical cord mesenchymal stem cells cultured on hydrogels with OD of 30% showed that the highest rate of cell proliferation belong to hydrogel with OA/GEL weight ratio of 30/70. Overall, it can be concluded from all obtained results that the prepared hydrogel with OA/GEL weight ratio and OD of 30/70 and 30%, respectively, could be proper candidate for use in muscle tissue engineering.

Multi-responsive and tough hydrogels based on triblock copolymer micelles as multi-functional macro-crosslinkers

Pluronic F127 diacrylate micelle-crosslinked hydrogels are very strong, tough, and reversibly responsive to changes in pH and ionic strength.

An injectable hydrogel formed by in situ cross-linking of glycol chitosan and multi-benzaldehyde functionalized PEG analogues for cartilage tissue engineering

In this study, a multi-benzaldehyde functionalized poly(ethylene glycol) analogue, poly(ethylene oxide-co-glycidol)-CHO (poly(EO-co-Gly)-CHO), was designed and synthesized for the first time, and was applied as a cross-linker to develop an injectable hydrogel system. Simply mixing two aqueous precursor solutions of glycol chitosan (GC) and poly(EO-co-Gly)-CHO led to the formation of chemically cross-linked hydrogels under physiological conditions in situ. The cross-linking was attributed to a Schiff's base reaction between amino groups of GC and aldehyde groups of poly(EO-co-Gly)-CHO. The gelation time, water uptake, mechanical properties and network morphology of the GC/poly(EO-co-Gly) hydrogels were well modulated by varying the concentration of poly(EO-co-Gly)-CHO. Degradation of the in situ formed hydrogels was confirmed both in vitro and in vivo. The integrity of the GC/poly(EO-co-Gly) hydrogels was subcutaneously maintained for up to 12 weeks in ICR mice. The feasibility of encapsulating chondrocytes in the GC/poly(EO-co-Gly) hydrogels was assessed. Live/Dead staining assay demonstrated that the chondrocytes were highly viable in the hydrogels, and no dedifferentiation of chondrocytes was observed after 2 weeks of in vitro culture. Cell counting kit-8 assay gave evidence of the remarkably sustained proliferation of the encapsulated chondrocytes. Maintenance of the chondrocyte phenotype was also confirmed with an examination of characteristic gene expression. These features suggest that GC/poly(EO-co-Gly) hydrogels hold potential as an artificial extracellular matrix for cartilage tissue engineering.