Stimulus-Responsive Hydrogels for Targeted Cancer Therapy

Cancer is a highly heterogeneous disease and remains a global health challenge affecting millions of human lives worldwide. Despite advancements in conventional treatments like surgery, chemotherapy, and immunotherapy, the rise of multidrug resistance, tumor recurrence, and their severe side effects and the complex nature of the tumor microenvironment (TME) necessitates innovative therapeutic approaches. Recently, stimulus-responsive nanomedicines designed to target TME characteristics (e.g., pH alterations, redox conditions, enzyme secretion) have gained attention for their potential to enhance anticancer efficacy while minimizing the adverse effects of chemotherapeutics/bioactive compounds. Among the various nanocarriers, hydrogels are intriguing due to their high-water content, adjustable mechanical characteristics, and responsiveness to external and internal stimuli, making them promising candidates for cancer therapy. These properties make hydrogels an ideal nanocarrier for controlled drug release within the TME. This review comprehensively surveys the latest advancements in the area of stimulus-responsive hydrogels for cancer therapy, exploring various stimuli-responsive mechanisms, including biological (e.g., pH, redox), chemical (e.g., enzymes, glucose), and physical (e.g., temperature, light), as well as dual- or multi-stimuli responsiveness. Furthermore, this review addresses the current developments and challenges in hydrogels in cancer treatment. Our aim is to provide readers with a comprehensive understanding of stimulus-responsive hydrogels for cancer treatment, offering novel perspectives on their development for cancer therapy and other medical applications.

Self-Degrading Multifunctional PEG-Based Hydrogels-Tailormade Substrates for Cell Culture

The use of PEG-based hydrogels as cell culture matrix to mimic the natural extracellular matrix (ECM) has been realized using a range of well-defined, tunable, and dynamic scaffolds, although they require cell adhesion ligands such as RGDS-peptide (Arg-Gly-Asp-Ser) to promote cell adhesion. Herein the synthesis of ionic and degradable hydrogels is demonstrated for cell culture by crosslinking [PEG-SH]4 with the zwitterionic crosslinker N,N-bis(acryloxyethyl)-N-methyl-N-(3-sulfopropyl) ammonium betaine (BMSAB) and the cationic crosslinker N,N-bis(acryloxyethyl)-N,N-dimethyl-1-ammonium iodide (BDMAI). Depending on the amount of ionic crosslinker used in gel formation, the hydrogels show tunable gelation time and stiffness. At the same time, the ionic groups act as catalysts for hydrolytic degradation, thereby allowing to define a stability window. The latter could be tailored in a straightforward manner by introducing the non-degradable crosslinker tri(ethylene glycol) divinyl ether. In addition, both ionic crosslinkers favor cell attachment in comparison to the pristine PEG hydrogels. The degradation is examined by swelling behavior, rheology, and fluorescence correlation spectroscopy indicating degradation kinetics depending on diffusion of incorporated fluorescent molecules.

Injectable and Microporous Microgel-Fiber Granular Hydrogel Loaded with Bioglass and siRNA for Promoting Diabetic Wound Healing

Injectable hydrogels find extensive application in the treatment of diabetic wound healing. However, traditional bulk hydrogels are significantly limited due to their nano-porous structure, which obstructs cell migration and tissue infiltration. Moreover, regulating inflammation and matrix metalloproteinase -9 (MMP-9) expression in diabetic wounds is crucial for enhancing wound healing. This study marks the first instance of introducing an efficient, scalable, and simple method for producing microfiber-gel granules encapsulating bioceramics powders. Utilizing this method, an injectable microporous granular microgel-fiber hydrogel (MFgel) is successfully developed by assembling microgel-fibers made from hyaluronic acid (HA) and sodium alginate (SA) loaded with small interfering RNA (siRNA) and bioglass (BG) particles. Compared to traditional hydrogels (Tgel), MFgel possesses a highly interconnected network with micron-sized pores, demonstrating favorable properties for cell adhesion and penetration in in vitro experiments. Additionally, MFgel exhibits a higher compressive modulus and superior mechanical stability. When implanted subcutaneously in mice, MFgel promotes cellular and tissue infiltration, facilitating cell proliferation. Furthermore, when applied to skin defects in diabetic rats, MFgel not only effectively regulates inflammation and suppresses MMP-9 expression but also enhances angiogenesis and collagen deposition, thereby significantly accelerating diabetic wound healing. Taken together, this hydrogel possesses great potential in diabetic wound healing applications.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Dual Delivery of BMP2 and IGF1 Through Injectable Hydrogel Promotes Cranial Bone Defect Healing

Critical-sized cranial bone defect remains a great clinical challenge. With advantages in regenerative medicine, injectable hydrogels incorporated with bioactive molecules show great potential in promoting cranial bone repair. Recently, we developed a dual delivery system by sequential release of bone morphogenetic protein 2 (BMP2) followed by insulin-like growth factor 1 (IGF1) in microparticles (MPs), and an injectable alginate/collagen (alg/col)-based hydrogel. In this study, we aim to evaluate the effect of dual delivery of BMP2 and IGF1 in MPs through the injectable hydrogel in critical-sized cranial bone defect healing. The gelatin MPs loaded with BMP2 and poly(lactic-co-glycolic acid)-poly(ethylene glycol)-carboxyl (PLGA-PEG-COOH) MPs loaded with IGF1 were prepared, respectively. The encapsulation efficiency and release profile of growth factors in MPs were measured. A cranial defect model was applied to evaluate the efficacy of the dual delivery system in bone regeneration. Adult Sprague Dawley rats were subjected to osteotomy to make an ⌀8-mm cranial defect. The injectable hydrogel containing MPs loaded with BMP2 (2 μg), IGF1 (2 μg), or a combination of BMP2 (1 μg) and IGF1 (1 μg) were injected to the defect site. New bone formation was evaluated by microcomputed tomography, histological analysis, and immunohistochemistry after 4 or 8 weeks. Data showed that dual delivery of the low-dose BMP2 and IGF1 in MPs through alg/col-based hydrogel successfully restored cranial bone as early as 4 weeks after implantation, whose effect was comparable to the single delivery of high-dose BMP2 in MPs. In conclusion, this study suggests that dual delivery of BMP2 and IGF1 in MPs in alg/col-based hydrogel achieves early bone regeneration in critical-sized bone defect, with advantage in reducing the dose of BMP2. Impact Statement Sequential release of bone morphogenetic protein 2 (BMP2) followed by insulin-like growth factor 1 (IGF1) in two different microparticles promotes critical-sized bone defect healing. This dual delivery system reduces the dose of BMP2 by supplementing IGF1, which may diminish the potential side effects of BMP2.

Advances in the stimuli-responsive injectable hydrogel for controlled release of drugs

The stimuli-responsiveness of injectable hydrogel has been drastically developed for the controlled release of drugs and achieved encouraging curative effects in a variety of diseases including wounds, cardiovascular diseases and tumors. The gelation, swelling and degradation of such hydrogels respond to endogenous biochemical factors (such as pH, reactive oxygen species, glutathione, enzymes, glucose) and/or to exogenous physical stimulations (like light, magnetism, electricity and ultrasound), thereby accurately releasing loaded drugs in response to specifically pathological status and as desired for treatment plan and thus improving therapeutic efficacy effectively. In this paper, we give a detailed introduction of recent progresses in responsive injectable hydrogels and focus on the design strategy of various stimuli-sensitivities and their resultant alteration of gel dissociation and drug liberation behaviour. Their application in disease treatment is also discussed. This article is protected by copyright. All rights reserved.

Redox-Responsive Hydrogels with Decoupled Initial Stiffness and Degradation

Disulfide-cross-linked hydrogels have been widely used for biological applications because of their degradability in response to redox stimuli. However, degradability often depends on polymer concentration, which also influences the hydrogel mechanical properties such as the initial stiffness. Here, we describe a one-pot cross-linking approach utilizing both a thiol-ene reaction through a Michael pathway with divinyl sulfone (DVS) to form non-reducible thioether bonds and thiol oxidation promoted by ferric ethylenediaminetetraacetic acid (Fe-EDTA) to form reducible disulfide bonds. The ratio between these two bonds was modulated by varying the DVS concentration used, and the initial shear or elastic modulus and degradation rate of the hydrogels were decoupled. These gels had tunable release rates of encapsulated dextran when exposed to 10 μM glutathione. Fibroblast encapsulation results suggested good cytocompatibility of the cross-linking reactions. This work shows the potential of combining DVS and Fe-EDTA to create thiol-cross-linked hydrogels as redox-responsive drug delivery vehicles and tissue engineering scaffolds with variable degradability.

In Sickness and in Health: The Oxygen Reactive Species and the Bone

Oxidative stress plays a central role in physiological and pathological bone conditions. Its role in signalment and control of bone cell population differentiation, activity, and fate is increasingly recognized. The possibilities of its use and manipulation with therapeutic goals are virtually unending. However, how redox balance interplays with the response to mechanical stimuli is yet to be fully understood. The present work summarizes current knowledge on these aspects, in an integrative and broad introductory perspective.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

Injectable, self-healing mesoporous silica nanocomposite hydrogels with improved mechanical properties

Self-healing hydrogels have emerged as promising biomaterials in regenerative medicine applications. However, an ongoing challenge is to create hydrogels that combine rapid self-healing with high mechanical strength to make them applicable to a wider range of organs/tissues. Incorporating nanoparticles within hydrogels is a popular strategy to improve the mechanical properties as well as to provide additional functionalities such as stimuli responsiveness or controlled drug delivery, further optimizing their use. In this context, mesoporous silica nanoparticles (MSNs) are promising candidates as they are bioactive, improve mechanical properties, and can controllably release various types of cargo. While commonly nanoparticles are added to hydrogels as filler component, in the current study we developed thiol surface-functionalized MSNs capable of acting as chemical crosslinkers with a known hydrophilic polymer, polyethylene glycol (PEG), through dynamic thiol-disulfide covalent interactions. Due to these dynamic exchange reactions, mechanically strong nanocomposites with a storage modulus of up to 32 ± 5 kPa compared to 1.3 ± 0.3 kPa for PEG hydrogels alone, with rapid self-healing capabilities, could be formed. When non-surface modified MSNs were used, the increase in storage modulus of the hydrogels was significantly lower (3.4 ± 0.7 kPa). In addition, the nanocomposites were shown to degrade slowly over 6 weeks upon exposure to glutathione while remaining intact at physiological conditions. Together, the data argue that creating nanocomposites using MSNs as dynamic crosslinkers is a promising strategy to confer mechanical strength and rapid self-healing capabilities to hydrogels. This approach offers new possibilities for creating multifunctional self-healing biomaterials for a wider range of applications in regenerative medicine.

Directional axonal regrowth induced by an aligned fibrin nanofiber hydrogel contributes to improved motor function recovery in canine L2 spinal cord injury

Spinal cord injuries (SCI) normally disrupt the long axonal tracts of the spinal cord and cause permanent neurological deficits, for which there is currently a lack of effective therapeutic methods. Biomaterial-based regenerative medicine is a pivotal strategy to induce axonal regeneration through delivery of biophysical and/or biochemical regulatory cues by biomaterials. We previously fabricated a hierarchically aligned fibrin hydrogel (AFG) that could promote neurogenic differentiation of stem cells in vitro and has been successfully applied for peripheral nerve and spinal cord regeneration in rats. In this study, AFG was used to repair a canine lumbar segment 2 hemisection spinal cord injury, and the consistency of histological, imageological and behavioral results was compared. AFG was used to construct an aligned fiber bridge that supported cell adhesion in vitro and rapidly facilitated tissue invasion along the long axis of fibers in vivo, Moreover, in vivo results demonstrated regrowth of axons in an oriented pattern connecting the rostral and caudal stumps. Consistent results were confirmed by diffusion tensor imaging, which allowed successful tracing of reconnected nerve fibers across the defect. As a result, directional axonal regrowth contributed to significantly improved recovery of motor functional behavior of SCI canines with AFG implantation. Our results suggest that AFG has great promise for rapidly directing axonal regrowth for nerve regeneration.

Stimuli-Responsive Delivery of Growth Factors for Tissue Engineering

Growth factors (GFs) play a crucial role in directing stem cell behavior and transmitting information between different cell populations for tissue regeneration. However, their utility as therapeutics is limited by their short half-life within the physiological microenvironment and significant side effects caused by off-target effects or improper dosage. "Smart" materials that can not only sustain therapeutic delivery over a treatment period but also facilitate on-demand release upon activation are attracting significant interest in the field of GF delivery for tissue engineering. Three properties are essential in engineering these "smart" materials: 1) the cargo vehicle protects the encapsulated therapeutic; 2) release is targeted to the site of injury; 3) cargo release can be modulated by disease-specific stimuli. The aim of this review is to summarize the current research on stimuli-responsive materials as intelligent vehicles for controlled GF delivery; Five main subfields of tissue engineering are discussed: skin, bone and cartilage, muscle, blood vessel, and nerve. Challenges in achieving such "smart" materials and perspectives on future applications of stimuli-responsive GF delivery for tissue regeneration are also discussed.

Reversible Redox Switching of Concurrent Luminescence and Visual Color Change Based on Lanthanide Metallogel

The development of reversible redox supramolecular gels capable of concurrent luminescence switch and visible color change with the facile redox process has always been an intriguing challenge. A redox-responsive supramolecular lanthanide metallogel with strong luminescence and yellow color is obtained via coordination interaction between 3,5-dinitrosalicylic acid (DNSA) and europium (Eu³⁺). Upon the addition of TiO₂ to the prepared gel (DNSA/Eu³⁺ gel), the oxidation process of the gel (DNSA/Eu³⁺/TiO₂ gel) can be easily achieved by UV irradiation. The DNSA/Eu³⁺/TiO₂ gel exhibits a concurrent reversible "on-off" luminescence and color change in response to redox stimuli. The DNSA/Eu³⁺/TiO₂ gel shows a concurrent quench of luminescence and a color change from yellow to red when the gel was stimulated by the reductant. Upon UV irradiation, the luminescence and color of the reduced DNSA/Eu³⁺/TiO₂ gel restored to its initial state due to the strong oxidation ability of hydroxyl radicals derived from photocatalytic oxidation of TiO₂. The results of UV-vis and mass spectroscopy indicated that the reversible redox responsiveness of DNSA/Eu³⁺/TiO₂ gel depends on the reversible oxidation-reduction reactions of DNSA. Moreover, DNSA/Eu³⁺/TiO₂ gel remains stable because the morphology of the gel had no change during the redox process. Exemplarily, the application of DNSA/Eu³⁺/TiO₂ gels to achieve luminescent patterning was investigated. The results demonstrated that the prepared metallogel has potential applications in the fields of writable materials, anticounterfeiting, sensors, and others.

A biomimetic self-assembling peptide promotes bone regeneration in vivo: A rat cranial defect study

Rationally designed, pH sensitive self-assembling β-peptides (SAPs) which are capable of reversibly switching between fluid and gel phases in response to environmental triggers are potentially useful injectable scaffolds for skeletal tissue engineering applications. SAP P₁₁-4 (CH₃COQQRFEWEFEQQNH₂) has been shown to nucleate hydroxyapatite mineral de novo and has been used in dental enamel regeneration. We hypothesised that addition of mesenchymal stromal cells (MSCs) would enhance the in vivo effects of P₁₁-4 in promoting skeletal tissue repair. Cranial defects were created in athymic rats and filled with either Bio-Oss® (anorganic bone chips) or P₁₁-4 ± human dental pulp stromal cells (HDPSCs). Unfilled defects served as controls. After 4 weeks, only those defects filled with P₁₁-4 alone showed significantly increased bone regeneration (almost complete healing), compared to unfilled control defects, as judged using quantitative micro-CT, histology and immunohistochemistry. In silico modelling indicated that fibril formation may be essential for any mineral nucleation activity. Taken together, these data suggest that self-assembling peptides are a suitable scaffold for regeneration of bone tissue in a one step, cell-free therapeutic approach.

Bioactive hydrogels for bone regeneration

Bone self-healing is limited and generally requires external intervention to augment bone repair and regeneration. While traditional methods for repairing bone defects such as autografts, allografts, and xenografts have been widely used, they all have corresponding disadvantages, thus limiting their clinical use. Despite the development of a variety of biomaterials, including metal implants, calcium phosphate cements (CPC), hydroxyapatite, etc., the desired therapeutic effect is not fully achieved. Currently, polymeric scaffolds, particularly hydrogels, are of interest and their unique configurations and tunable physicochemical properties have been extensively studied. This review will focus on the applications of various cutting-edge bioactive hydrogels systems in bone regeneration, as well as their advantages and limitations. We will examine the composition and defects of the bone, discuss the current biomaterials for bone regeneration, and classify recently developed polymeric materials for hydrogel synthesis. We will also elaborate on the properties of desirable hydrogels as well as the fabrication techniques and different delivery strategies. Finally, the existing challenges, considerations, and the future prospective of hydrogels in bone regeneration will be outlined.

Alginate/poly(amidoamine) injectable hybrid hydrogel for cell delivery

A covalently cross-linked injectable hybrid hydrogel, namely, alginate/poly(amidoamine) (PAMAM), with the objective of cell delivery was innovatively designed and synthesized using tetra-amino-functional PAMAM dendrimer as the cross-linker. With the increase in percentage of PAMAM cross-linker, the pore size and swelling ratio of hydrogels were in the range of 57 ± 18 μm to 88 ± 25 μm and 110 ± 16 to 157 ± 20, respectively. The study of attachment and proliferation of MC3T3-E1 pre-osteoblasts using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay through indirect and direct contact methods indicated a continuous increase in metabolically active live cells with time, implying non-cytotoxicity of the synthesized hydrogel. The live–dead assay showed >95% of live cells for alginate/PAMAM hydrogels, suggesting viability of the encapsulated cells. When the percentage of PAMAM cross-linker in alginate/PAMAM hydrogel was increased from 5 to 25, the percentage degradation rate decreased from 1.1 to 0.29%/day. Given that the poly(ethylene glycol) is commonly used cross-linker for hydrogel syntheses, we compared the behavior with poly(ethylene glycol). The incorporation of poly(ethylene glycol) in alginate/PAMAM hydrogel reduced the activity of MC3T3-E1 cells and their viability compared to the alginate/PAMAM hydrogels. The protonation of amino groups in alginate/PAMAM injectables under physiological conditions led to the formation of cationic hydrogels. These cationic hydrogels showed enhanced cell encapsulation and attachment ability because of electrostatic interaction with negatively charged cell surface as determined by cell adhesion and extensions from scanning electron microscope and vinculin assay and ability of in situ calcium phosphate mineralization. These observations point toward the potential use as an injectable scaffold for cell delivery and tissue engineering applications.

The immobilization of antibiotic-loaded polymeric coatings on osteoarticular Ti implants for the prevention of bone infections

Implant-associated infections in orthopaedic surgeries are very critical as they may hinder bone healing, cause implant failure and even progress to osteomyelitis. Drug-eluting implants for local delivery of antibiotics at surgical sites are thought to be promising in preventing infections. Herein, the antibiotic vancomycin was encapsulated in a poly(ethylene glycol) (PEG)-based hydrogel film that was covalently bound to Ti implants and subsequently covered by a PEG-poly(lactic-co-caprolactone) (PEG-PLC) membrane. Additionally, crosslinked starch (CSt) was mixed with the hydrogel because its porous microstructure is able to inhibit hydrogel swelling and thus slow down drug release. The release behavior could be regulated by the drug loading and the coating thickness. The vancomycin-loaded Ti implants showed no initial burst release, offering a sustained drug release for nearly 3 weeks in vitro and more than 4 weeks in vivo. In a rabbit model of S. aureus infection, the implants with a 4 mg vancomycin loading significantly reduced the inflammatory reaction and exhibited a good antimicrobial capability. The immobilization of the antibiotic-loaded polymeric coatings on orthopaedic implants can offer a sustainable drug release with no initial burst release and maintain an effective concentration for a longer time, so it is expected to be an effective strategy to treat and prevent local bone infections.

Encapsulation of ionic nanoparticles produces reactive oxygen species (ROS)-responsive microgel useful for molecular detection

Encapsulation of ionic nanoparticles in a hydrogel microparticle, i.e. microgel, produces a target-stimulated probe for molecular detection. Selective reactive oxygen species (ROS) release the enclosed cations from the microgel which subsequently turn on the fluorogenic dyes to emit intense fluorescence, permitting rapid detection of ROS or ROS-producing molecules. The ROS-responsive microgel provides the advantages of simple fabrication, bright and stable signals, easy handling, and rapid response, carrying great promise in biomedical applications.

Dopamine-assisted fixation of drug-loaded polymeric multilayers to osteoarticular implants for tuberculosis therapy

Currently, the major issues in the treatment of osteoarticular tuberculosis (TB) after implant placement are low drug concentration at the infected focus and drug resistance resulting from the long-term chemotherapy. The application of drug-loaded polymeric multilayers on implantable devices offers a promising solution to the problems. Herein, a poly(ethylene glycol)-based hydrogel film embedded with isoniazid (INH)-loaded alginate microparticles was fixed to Ti implants via adhesive polydopamine, subsequently capped by poly(lactic-co-glycolic acid) membranes for the sustained and localized delivery of the anti-TB drug. The antibacterial efficacy of the released INH was confirmed by a 4.5 ± 0.8 cm inhibition zone formed in the fourth week after inoculation of Mycobacterium tuberculosis. The INH-loaded Ti implants showed no toxicity to the osteoblast cell and provided a consistent drug release for nearly one week in vitro. The release profile in vivo showed a high local concentration and low systemic exposure. The local INH concentration could be kept higher than its minimum inhibitory concentration over a period of 8 weeks, which proves that it is a promising strategy to improve the severe osteoarticular TB treatment.

Blocking of matrix metalloproteinases-13 responsive peptide in poly(urethane urea) for potential cartilage tissue engineering applications

The matching of scaffold degradation rate with neotissue growth is required for tissue engineering applications. Timely provision of proper spaces especially for cartilage tissue engineering plays a pivotal role in chondrocyte cluster formation. In this study, poly(urethane urea) was synthesized using conventional two-stage method by extending the isocyanate group terminated prepolymers with different amounts of GPLGLWARK peptide, which responses the degrading induced by matrix metalloproteinase 13, the main proteinase for cartilage matrix degradation. The Fourier transform infrared spectrometer with the attenuated total reflection and 1H nuclear magnetic resonance spectra revealed that the peptides were introduced to poly(urethane urea) according to the characteristic absorption bands of the peptide and the newly formed urea bonds. The ultraviolet-visible spectroscopy spectra showed that the weight percentages of the peptide in the three poly(urethane urea) were 25%, 32%, and 35%. Atomic force microscopy images revealed that phase separation occurred in all poly(urethane urea) samples and became increasingly apparent with increasing amount of peptides introduced. Mechanical tests showed that the poly(urethane urea) strength increased with increasing amount of peptides in poly(urethane urea). Poly(urethane urea) proteolysis in matrix metalloproteinase 13 solution was more rapid than hydrolysis in aqueous buffer, and proteolysis rate was dependent on the amount of peptides in poly(urethane urea). Cell proliferation on the material surface in vitro displayed nontoxicity for all synthesized poly(urethane urea). In vivo subcutaneous implantation evaluation revealed the presence of local foreign body reactions triggered by poly(urethane urea) but was not due to peptide in poly(urethane urea). Moreover, the synthesized poly(urethane urea) with significant phase separation did not degrade under the matrix metalloproteinase 13 free subcutaneous environment, but poly(urethane urea) with minimal phase separation was degraded by attacking of the enzymes adsorbed on the hydrophobic surface through non-specific adsorption.

Synthesis and characterization of in situ forming anionic hydrogel as vitreous substitutes

The natural vitreous is a biological hydrogel consisting primarily of a collagen and anionic hyaluronate. It is surgically removed in many ocular diseases and replaced with fluids, gases, or silicone oils. We have been interested in developing synthetic hydrogels as vitreous substitutes. In this study, we combined the stiffness and hydrophobicity of polymethacrylamide (PMAM) and the anionic nature of polymethacrylate (PMAA) to make copolymers that would mimic the natural vitreous. We used bis-methacryloyl cystamine (BMAC) to introduce thiol groups for reversible crosslink. The Mn of copolymers ranged from ∼100 k to ∼200 k Da (polydisperisty index of 1.47-2.63) and their composition as determined by titration, 1 H NMR and disulfide test were close to the feed ratio. The reactivities of monomers were as follows: MAM > MAA ∼ BMAC. Copolymers with higher MAA contents gelled faster, swelled more, and had higher storage modulus (1.5 to 100 Pa) comparable to that of the natural vitreous. We evaluated the biocompatibility of copolymers by electric cell-substrate impedance sensing (ECIS) using human retinal pigment epithelial cells, primary porcine retinal pigmented epithelial cells, human microvascular endothelial cells adult dermis, and a fibroblast line 3T3. The biocompatibility decreases as the content of BMAC increases. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 977-988, 2017.

Controlled gelation kinetics of cucurbit[7]uril-adamantane cross-linked supramolecular hydrogels with competing guest molecules

Gelation kinetics of hydrogels is closely linked to many applications such as the development of injectable and printable hydrogels. However, the control of gelation kinetics without compromising the structure and other properties of the hydrogels, remains a challenge. Here, we demonstrate a method to control the gelation kinetics of cucurbit[7]uril-adamantane (CB[7]-AD) cross-linked supramolecular hydrogels by using competing guest molecules. The association between CB[7] and AD moieties on the polymer backbone was impeded by pre-occupying the CB[7] cavity with competing guest molecules. By using various guest molecules and concentrations, the gelation of the hydrogels could be varied from seconds to hours. The strong interaction of CB[7]-AD pair endue the hydrogels good mechanical properties and stability. Moreover, the binding of functionalized guest molecules of CB[7] moieties offers a facile approach for tailoring of the hydrogels' scaffold. Combined with hydrogel injection and printing technology, this method offers an approach for the development of hydrogels with advanced temporal and spatial complexity.

Functional biomedical hydrogels for in vivo imaging

In vivo imaging of biomedical hydrogels enables real-time and non-invasive visualization of the status of structure and function of hydrogels.

Trigger chemistries for better industrial formulations

In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

Supramolecular hydrogels co-loaded with camptothecin and doxorubicin for sustainedly synergistic tumor therapy

A supramolecular hydrogel was prepared to encapsulate and release both camptothecin and doxorubicin in a controlled manner for sustainedly synergistic tumor therapy.

An injectable hydrogel formed by in situ cross-linking of glycol chitosan and multi-benzaldehyde functionalized PEG analogues for cartilage tissue engineering

In this study, a multi-benzaldehyde functionalized poly(ethylene glycol) analogue, poly(ethylene oxide-co-glycidol)-CHO (poly(EO-co-Gly)-CHO), was designed and synthesized for the first time, and was applied as a cross-linker to develop an injectable hydrogel system. Simply mixing two aqueous precursor solutions of glycol chitosan (GC) and poly(EO-co-Gly)-CHO led to the formation of chemically cross-linked hydrogels under physiological conditions in situ. The cross-linking was attributed to a Schiff's base reaction between amino groups of GC and aldehyde groups of poly(EO-co-Gly)-CHO. The gelation time, water uptake, mechanical properties and network morphology of the GC/poly(EO-co-Gly) hydrogels were well modulated by varying the concentration of poly(EO-co-Gly)-CHO. Degradation of the in situ formed hydrogels was confirmed both in vitro and in vivo. The integrity of the GC/poly(EO-co-Gly) hydrogels was subcutaneously maintained for up to 12 weeks in ICR mice. The feasibility of encapsulating chondrocytes in the GC/poly(EO-co-Gly) hydrogels was assessed. Live/Dead staining assay demonstrated that the chondrocytes were highly viable in the hydrogels, and no dedifferentiation of chondrocytes was observed after 2 weeks of in vitro culture. Cell counting kit-8 assay gave evidence of the remarkably sustained proliferation of the encapsulated chondrocytes. Maintenance of the chondrocyte phenotype was also confirmed with an examination of characteristic gene expression. These features suggest that GC/poly(EO-co-Gly) hydrogels hold potential as an artificial extracellular matrix for cartilage tissue engineering.

Multi-responsive Hydrogels Derived from the Self-assembly of Tethered Allyl-functionalized Racemic Oligopeptides

A multi-responsive triblock hydrogelator oligo(dl-allylglycine)-block-poly(ethylene glycol)-block-oligo(dl-allylglycine) (ODLAG-b-PEG-b-ODLAG) was synthesized facilely by ring-opening polymerization (ROP) of DLAG N-carboxyanhydride (NCA) with a diamino-terminated PEG as the macroinitiator. This system exhibited heat-induced sol-to-gel transitions and either sonication- or enzyme-induced gel-to-sol transitions. The β-sheeting of the oligopeptide segments was confirmed by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and wide-angle X-ray scattering (WAXS). The β-sheets further displayed tertiary ordering into fibrillar structures that, in turn generated a porous and interconnected hydrogel matrix, as observed via transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The reversible macroscopic sol-to-gel transitions triggered by heat and gel-to-sol transitions triggered by sonication were correlated with the transformation of nanostructural morphologies, with fibrillar structures observed in gel and spherical aggregates in sol, respectively. The enzymatic breakdown of the hydrogels was also investigated. This allyl-functionalized hydrogelator can serve as a platform for the design of smart hydrogels, appropriate for expansion into biological systems as bio-functional and bio-responsive materials.

Bioorthogonally cross-linked hydrogel network with precisely controlled disintegration time over a broad range

Hydrogels with predictable degradation are highly desired for biomedical applications where timely disintegration of the hydrogel (e.g., drug delivery, guided tissue regeneration) is required. However, precisely controlling hydrogel degradation over a broad range in a predictable manner is challenging due to limited intrinsic variability in the degradation rate of liable bonds and difficulties in modeling degradation kinetics for complex polymer networks. More often than not, empirical tuning of the degradation profile results in undesired changes in other properties. Here we report a simple but versatile hydrogel platform that allows us to formulate hydrogels with predictable disintegration time from 2 to >250 days yet comparable macroscopic physical properties. This platform is based on a well-defined network formed by two pairs of four-armed polyethylene glycol macromers terminated with azide and dibenzocyclooctyl groups, respectively, via labile or stable linkages. The high-fidelity bioorthogonal reaction between the symmetric hydrophilic macromers enables robust cross-linking in water, phosphate-buffered saline, and cell culture medium to afford tough hydrogels capable of withstanding >90% compressive strain. Strategic placement of labile ester linkages near the cross-linking site within this superhydrophilic network, accomplished by adjustments of the ratio of the macromers used, enables broad tuning of the disintegration rates precisely matching with the theoretical predictions based on first-order linkage cleavage kinetics. This platform can be exploited for applications where a precise degradation rate is targeted.