Switching specific biomolecular interactions on surfaces under complex biological conditions

Fabrication of Multifunctional Cotton Fabrics with Antibacterial, Hydrophobic, and Dyeing Performance

Cotton fibers have received considerable attention owing to their functional properties. Current research endeavors have shifted toward devising straightforward and versatile approaches for modifying cotton fibers. Herein, a simple and feasible method was proposed for preparing multifunctional cotton fibers. This method entailed subjecting cotton fibers to alkaline conditions, prompting the epoxy group in epoxidized soybean oil to engage in a ring-opening reaction with the hydroxyl group in cotton fibers and the amino group in polyhexamethylene guanidine hydrochloride. Epoxidized soybean oil acted as a bridge, forming a covalent bond between polyhexamethylene guanidine hydrochloride and cotton fibers, thereby facilitating the cationization of cotton fibers. Structural changes in the modified cotton fibers were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and energy-dispersive X-ray spectroscopy. The modified cotton fibers were also evaluated for their dyeing, antibacterial, and hydrophobic properties. The results demonstrated that the dye exhaustion and total dye utilization of modified cotton in salt-free dyeing were much higher than those of raw cotton in conventional dyeing. The water contact angle of the modified cotton fiber reached 139.5°, and their antibacterial properties were partially improved. Importantly, this chemical modification was performed under mild conditions, highlighting its simplicity and environmentally friendly nature.

Recycling protein selective adsorption on fluorine-modified surface through fluorine-fluorine interaction

Low surface energy materials with micro-nano structures have been widely developed to prevent non-specific adhesion of biomolecules. Herein we put forward a new approach based on the antifouling and self-assembly properties of fluorine components, to construct a non-specific protein resistance surface with selective protein adsorption property. Briefly, the antifouling surface (SN-F) was obtained by a simple one-step modification on silicon nanowire arrays (SiNWAs) with fluorine coupling agent 1 H,1 H,2 H,2 H-perfluorodecyltrimethoxysilane (FAS). And protein was fluorinated by conjugation with an amphiphilic fluoro-copolymer, produced from 2-methacrylamido glucopyranose (MAG) and trifluoroethyl methacrylate (TFEMA) via RAFT polymerization. The properties of the materials were characterized by ¹H nuclear magnetic resonance (¹H NMR), infrared spectroscopy (FTIR), water contact angle, and X-ray photoelectron spectroscopy (XPS) etc., and protein adsorption was investigated by protein content measurement, fluorescence detection, and electrophoresis. It was observed that the adsorption for native proteins on SN-F was at an extremely low level, while the adsorption for the fluoro-copolymer conjugated protein (PFG-BSA) was significantly increased. When the percentage of TFEMA in the fluoro-copolymer was as high as 52.0%, the fluorinated protein adsorbed on SN-F was more than 35 times of native proteins on the surface. Moreover, the platform could resist IgG adhesion in serum after the adsorption of fluorinated protein, and it could be recycled three times after 75% ethanol treatment. In conclusion, SN-F showed non-specific protein resistance through low surface energy and specific protein adsorption by fluorine-fluorine self-assembly. The fluorinated nanostructured platform has a great potential in controlling protein adsorption and release.

Nitrogen-rich carbon quantum dots (N-CQDs) based on natural deep eutectic solvents: Simultaneous detection and treatment of trace Co2+ under saline conditions

Trace Co²⁺, when present in large quantities, is harmful to the environment and therefore cannot be ignored. Inductively coupled plasma mass spectrometry (ICP-MS) is a standard method used to detect metal ions, however, detecting trace Co²⁺ under high saline conditions can be challenging. Similarly, existing Co²⁺ treatment methods are prone to secondary pollution and have high energy consumption. Therefore, it is necessary to find an efficient and non-polluting method for Co²⁺ detection and treatment. This study successfully synthesized nitrogen-rich carbon quantum dots (N-CQDs) based on natural deep eutectic solvents (NADES) using a one-step solvothermal method. The prepared N-CQDs exhibited excellent fluorescence and high salt tolerance. The simultaneous detection and treatment of trace Co²⁺ in water under high salinity conditions were achieved for the first time. The response of the N-CQDs to Co²⁺ under saline condition was linear in the range of 5-250 μM with a limit of detection (LOD) of 1.2269 μM. Feasibility of practical application was assessed by quantitative detection of Co²⁺ in real water samples. Furthermore, the N-CQDs can treat Co²⁺, and the removal rate was 99.98%.

Synthesis conditions influencing formation of MAPbBr3 perovskite nanoparticles prepared by the ligand-assisted precipitation method

This work reports on an optimized procedure to synthesize methylammonium bromide perovskite nanoparticles. The ligand-assisted precipitation synthetic pathway for preparing nanoparticles is a cost-effective and promising method due to its ease of scalability, affordable equipment requirements and convenient operational temperatures. Nevertheless, there are several parameters that influence the resulting optical properties of the final nanomaterials. Here, the influence of the choice of solvent system, capping agents, temperature during precipitation and ratios of precursor chemicals is described, among other factors. Moreover, the colloidal stability and stability of the precursor solution is studied. All of the above-mentioned parameters were observed to strongly affect the resulting optical properties of the colloidal solutions. Various solvents, dispersion media, and selection of capping agents affected the formation of the perovskite structure, and thus qualitative and quantitative optimization of the synthetic procedure conditions resulted in nanoparticles of different dimensions and optical properties. The emission maxima of the nanoparticles were in the 508–519 nm range due to quantum confinement, as confirmed by transmission electron microscopy. This detailed study allows the selection of the best optimal conditions when using the ligand-assisted precipitation method as a powerful tool to fine-tune nanostructured perovskite features targeted for specific applications.

Ultrathin lead bromide perovskite platelets spotted with europium(ii) bromide dots

We describe here the preparation of a novel nanohybrid comprising a two-layer cesium lead bromide nanoplatelet, [CsPbBr3]PbBr4 NPL, containing europium(ii) bromide (EuBr2) nanodots, by ultrasound/heating treatment of toluene dispersions of the CsPbBr3 nanomaterial in the presence of EuBr2 nanodots. The hybrid nanoplatelets exhibit strong excitonic and narrow emission peaks characteristic of ultrathin NPLs at 430 and 436 nm, respectively.

Switchable presentation of cytokines on electroactive polypyrrole surfaces for hematopoietic stem and progenitor cells

Hematopoietic stem cells are used in transplantations for patients with hematologic malignancies. Scarce sources require efficient strategies of expansion, including polymeric biomaterials mimicking architectures of bone marrow tissue. Tissue microenvironment and mode of cytokine presentation strongly influence cell fate. Although several cytokines with different functions as soluble or membrane-bound mediators have already been identified, their precise roles have not yet been clarified. A need exists for in vitro systems that mimic the in vivo situation to enable such studies. One way is to establish surfaces mimicking physiological presentation using protein-immobilization onto polymer films. However these films merely provide a static presentation of the immobilized proteins. It would be advantageous to also dynamically change protein presentation and functionality to better reflect the in vivo conditions. The electroactive polymer polypyrrole shows excellent biocompatibility and electrochemically alters its surface properties, becoming an interesting choice for such setups. Here, we present an in vitro system for switchable presentation of membrane-bound cytokines. We use interleukin IL-3, known to affect hematopoiesis, and show that when immobilized on polypyrrole films, IL-3 is bioavailable for the bone marrow-derived FDC-P1 progenitor cell line. Moreover, IL-3 presentation can be successfully altered by changing the redox state of the film, in turn influencing FDC-P1 cell viability. This novel in vitro system provides a valuable tool for stimuli-responsive switchable protein presentation allowing the dissection of relevant mediators in stem and progenitor cell behavior.

Electrically Responsive Surfaces: Experimental and Theoretical Investigations

Stimuli-responsive surfaces have sparked considerable interest in recent years, especially in view of their biomimetic nature and widespread biomedical applications. Significant efforts are continuously being directed at developing functional surfaces exhibiting specific property changes triggered by variations in electrical potential, temperature, pH and concentration, irradiation with light, or exposure to a magnetic field. In this respect, electrical stimulus offers several attractive features, including a high level of spatial and temporal controllability, rapid and reverse inducement, and noninvasiveness. In this Account, we discuss how surfaces can be designed and methodologies developed to produce electrically switchable systems, based on research by our groups. We aim to provide fundamental mechanistic and structural features of these dynamic systems, while highlighting their capabilities and potential applications. We begin by briefly describing the current state-of-the-art in integrating electroactive species on surfaces to control the immobilization of diverse biological entities. This premise leads us to portray our electrically switchable surfaces, capable of controlling nonspecific and specific biological interactions by exploiting molecular motions of surface-bound electroswitchable molecules. We demonstrate that our self-assembled monolayer-based electrically switchable surfaces can modulate the interactions of surfaces with proteins, mammalian and bacterial cells. We emphasize how these systems are ubiquitous in both switching biomolecular interactions in highly complex biological conditions while still offering antifouling properties. We also introduce how novel characterization techniques, such as surface sensitive vibrational sum-frequency generation (SFG) spectroscopy, can be used for probing the electrically switchable molecular surfaces in situ. SFG spectroscopy is a technique that not only allowed determining the structural orientation of the surface-tethered molecules under electroinduced switching, but also provided an in-depth characterization of the system reversibility. Furthermore, the unique support from molecular dynamics (MD) simulations is highlighted. MD simulations with polarizable force fields (FFs), which could give proper description of the charge polarization caused by electrical stimulus, have helped not only back many of the experimental observations, but also to rationalize the mechanism of switching behavior. More importantly, this polarizable FF-based approach can efficiently be extended to light or pH stimulated surfaces when integrated with reactive FF methods. The interplay between experimental and theoretical studies has led to a higher level of understanding of the switchable surfaces, and to a more precise interpretation and rationalization of the observed data. The perspectives on the challenges and opportunities for future progress on stimuli-responsive surfaces are also presented.

A survey of state-of-the-art surface chemistries to minimize fouling from human and animal biofluids

Fouling of artificial surfaces by biofluids is a plague Biotechnology deeply suffers from. Herein, we inventory the state-of-the-art surface chemistries developed to minimize this effect from both human and animal biosamples.