Combination of PEGylation and Cationization on Phospholipid-Coated Cyclosporine Nanosuspensions for Enhanced Ocular Drug Delivery

Strong precorneal clearance mechanisms including reflex blink, constant tear drainage, and rapid mucus turnover constitute great challenges for eye drops for effective drug delivery to the ocular epithelium. In this study, cyclosporine A (CsA) for the treatment of dry eye disease (DED) was selected as the model drug. Two strategies, PEGylation for mucus penetration and cationization for potent cellular uptake, were combined to construct a novel CsA nanosuspension (NS@lipid-PEG/CKC) by coating nanoscale drug particles with a mixture of lipids, DSPE-PEG2000, and a cationic surfactant, cetalkonium chloride (CKC). NS@lipid-PEG/CKC with the mean size ∼173 nm and positive zeta potential ∼+40 mV showed promoted mucus penetration, good cytocompatibility, more cellular uptake, and prolonged precorneal retention without obvious ocular irritation. More importantly, NS@lipid-PEG/CKC recovered tear production and goblet cell density more efficiently than the commercial cationic nanoemulsion on a dry eye disease rat model. All results indicated that a combination of PEGylation and cationization might provide a promising strategy to coordinate mucus penetration and cellular uptake for enhanced drug delivery to the ocular epithelium for nanomedicine-based eye drops.

Aminated Rapeseed Husks (Brassica napus) as an Effective Sorbent for Removing Anionic Dyes from Aqueous Solutions

The study investigated the effect of modifying rapeseed husks with ammonia and epichlorohydrin on their sorption capacity against anionic reactive dyes: Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84). Its scope included sorbents characterization (FTIR, pHPZC), determination of pH influence on the sorption effectiveness of dyes, the adsorption kinetics of dyes, as well as the maximum sorption capacity. The study proved that the reaction of rapeseed husk biomass with ammonia can lead to its amination, namely to the introduction of amine functional groups into the material's structure. The sorption effectiveness of RB5 and RY84 on the tested sorbents was the highest in the pH range of 2-3. The dye sorption kinetics was well described by the pseudo-second-order model. The sorption equilibrium time ranged from 90 to 180 min, and depended on the initial concentration of dyes and the number of amino groups on the sorbent's surface. The most efficient of the sorbents tested were rapeseed husks pre-activated with epichlorohydrin and then aminated with ammonia. Their sorption capacity determined for RB5 and RY84 was 135.83 mg/g and 114.23 mg/g, respectively, which was 794% and 737% higher than that of the non-modified husks.

Fabrication of Multifunctional Cotton Fabrics with Antibacterial, Hydrophobic, and Dyeing Performance

Cotton fibers have received considerable attention owing to their functional properties. Current research endeavors have shifted toward devising straightforward and versatile approaches for modifying cotton fibers. Herein, a simple and feasible method was proposed for preparing multifunctional cotton fibers. This method entailed subjecting cotton fibers to alkaline conditions, prompting the epoxy group in epoxidized soybean oil to engage in a ring-opening reaction with the hydroxyl group in cotton fibers and the amino group in polyhexamethylene guanidine hydrochloride. Epoxidized soybean oil acted as a bridge, forming a covalent bond between polyhexamethylene guanidine hydrochloride and cotton fibers, thereby facilitating the cationization of cotton fibers. Structural changes in the modified cotton fibers were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and energy-dispersive X-ray spectroscopy. The modified cotton fibers were also evaluated for their dyeing, antibacterial, and hydrophobic properties. The results demonstrated that the dye exhaustion and total dye utilization of modified cotton in salt-free dyeing were much higher than those of raw cotton in conventional dyeing. The water contact angle of the modified cotton fiber reached 139.5°, and their antibacterial properties were partially improved. Importantly, this chemical modification was performed under mild conditions, highlighting its simplicity and environmentally friendly nature.

Eco-Friendly Methods for Extraction and Modification of Cellulose: An Overview

Cellulose is the most abundant renewable polymer on Earth and can be obtained from several different sources, such as trees, grass, or biomass residues. However, one of the issues is that not all the fractionation processes are eco-friendly and are essentially based on cooking the lignocellulose feedstock in a harsh chemical mixture, such as NaOH + Na₂S, and water, to break loose fibers. In the last few years, new sustainable fractionation processes have been developed that enable the obtaining of cellulose fibers in a more eco-friendly way. As a raw material, cellulose's use is widely known and established in many areas. Additionally, its products/derivatives are recognized to have a far better environmental impact than fossil-based materials. Examples are textiles and packaging, where forest-based fibers may contribute to renewable and biodegradable substitutes for common synthetic materials and plastics. In this review, some of the main structural characteristics and properties of cellulose, recent green extraction methods/strategies, chemical modification, and applications of cellulose derivatives are discussed.

Efficient Cationization of Cotton for Salt-Free Dyeing by Adjusting Fiber Crystallinity through Alcohol-Water-NaOH Pretreatment

Cationization of cotton is considered to be an effective way to realize salt-free dyeing of reactive dyes. However, applying cotton modified with glycidyltrimethylammonium chloride (GTA) suffers from large consumption of the cationic reagent. One of the reasons is that high crystallinity of cotton fibers hinders the penetration of the reagents into the cellulose interior and limits the reaction between them. This paper designed to use alcohol-water-NaOH system to pretreat the fibers before cationization. With this method, crystallinity of the cotton fibers is decreased and more reactive -OH is exposed, resulting in much higher fiber-reagent reactivity and increased GTA utilization. Influence of alcohol type, alcohol-to-water ratio, and quantity of NaOH on fiber crystallinity and GTA dosage for cationization are all examined. It is found that for achieving 96.0% fixation of C.I. Reactive Black 5 in the absence of salt, GTA dosage can be reduced by half when the fibers are pretreated by alcohol-water-NaOH. Compared with ethanol, n-propanol and isopropanol, tert-butyl alcohol incorporated system shows better performance in increasing fiber reactivity due to their weaker ability to dissolve ions. In this study, XRD and FT-IR are used to demonstrate changes in crystallinity of the fibers after pretreatment. The alteration in micromorphology and hydrophilicity of the pretreated fibers is observed by SEM and water contact angle test, respectively. Furthermore, the alcohol-water-NaOH system can be recycled to show very good repeatability. Notably, all dyed samples pretreated with the system present high color saturation and satisfactory color fastness, especially that the wet rub fastness reaches 4-5 grade, which is one grade higher than that obtained from the conventional dyeing with salt. The above findings prove that alcohol-water-NaOH pretreatment is effective in enhancing reactivity of the cotton fibers and penetrability of the agent, and it shows promising prospects in real application.

Elaboration of Cationic Soluble Soybean Polysaccharides-Epigallocatechin Gallate Nanoparticles with Sustained Antioxidant and Antimicrobial Activities

Epigallocatechin gallate (EGCG) is easily oxidized by environmental stress elements, including light, heat, and oxygen; thus, its biological activities can be reduced or even lost when exposed to a natural environment. Here, soluble soybean polysaccharide (SSPS) was successfully etherized by 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC), positively charged to extract cationic SSPS (CSSPS). Nanoparticles based on CSSPS can improve the encapsulation efficiency (EE) and sustained bioactivity of EGCG. The EE of EGCG by CSSPS was improved significantly as compared with that of SSPS due to the electrostatic interactions. Furthermore, the protective and sustained-release effects of CSSPS on EGCG in the EGCG-CSSPS nanoparticles (EGCG-CSSPS-NPs) markedly improved the sustained antioxidant and antimicrobial activities of EGCG, which was confirmed by the results of a salmon-preservation experiment. In addition, cytotoxicity tests showed that EGCG-CSSPS-NPs could effectively inhibit the proliferation of tumor cells but had no obvious toxicity to normal cells.

Surface-tailoring of emulsomes for boosting brain delivery of vinpocetine via intranasal route: in vitro optimization and in vivo pharmacokinetic assessment

Vinpocetine (VNP), a semisynthetic active pharmaceutical ingredient, is used for oral management of cerebrovascular diseases because of its ability to enhance the blood flow to the brain. However, despite that, the therapeutic application of VNP is restricted due to its reduced bioavailability and diminished brain levels that could be attributed to its low aqueous solubility, short half-life, and presystemic metabolism exposure. Accordingly, the goal of this work was to explore the ability of surface-tailored intranasal emulsomes to boost brain delivery of the drug. A 3²2¹ factorial design was implemented to explore the impact of phospholipid (PL) to solid lipid weight ratio, PL to cholesterol molar ratio, and type of solid lipid on vesicle size, zeta potential, drug entrapment, and release efficiency of the new developed VNP emulsomes. Tailoring of the optimized emulsomal surface formulation was performed using either cationization or PEGylation approaches to boost blood–brain barrier penetration. The pharmacokinetic assessment in rats showed significantly improved bioavailability of VNP emulsomal formulations compared to the oral market product. Additionally, surface-tailored emulsomes exhibited significantly higher brain levels compared to the optimized emulsomes. Based on these findings, the proposed surface-tailored emulsomes could be considered as a promising platform for achieving high brain levels of VNP following intranasal administration.

Cationization-Enhanced Type I and Type II ROS Generation for Photodynamic Treatment of Drug-Resistant Bacteria

Photodynamic therapy as an emerging phototheranostic approach holds great potential for antibacterial treatment, but is limited by compromised reactive oxygen species (ROS) generation in an aggregate and hypoxic microenvironment. Herein, we report a molecular cationization approach to boost the ROS, especially type I ROS generation of aggregation-induced emission (AIE) photosensitizers for photodynamic treatment of drug-resistant bacteria. Such cationization reinforces the electron-accepting ability of the cationic moiety, promotes intersystem crossing (ISC), and increases electron separation and transfer processes. The resultant CTBZPyI exhibits largely enhanced ROS generation ability with predominant hydroxyl radical generation over its neutral counterpart in aggregate. Moreover, cationization also confers CTBZPyI with the bacterial binding ability and a moderate bacterial inactivation ability in the dark. Further light irradiation leads to superb antibacterial performance, which largely promotes the healing process of a MRSA-infected wound. Such a cationization strategy is expected to be a general strategy for the design of highly effective type I photosensitizers for bacterial infection treatment.

Layer-by-Layer Self-Assembly of Hollow Nitrogen-Doped Carbon Quantum Dots on Cationized Textured Crystalline Silicon Solar Cells for an Efficient Energy Down-Shift

Enhancing the efficiency of the crystalline silicon solar cell (c-Si SC) by coating the energy shifting layer with quantum dots (QDs) is a recent approach to efficiently utilize the high-energy spectrum of light. Carbon QDs are an attractive candidate for such applications; however, a small Stokes shift and nonuniform coating due to high aggregation are the bottlenecks to fully utilize their potential. For this purpose, here, we propose a layer-by-layer self-assembled uniform coating of eco-friendly red-emissive hollow nitrogen-doped carbon QDs (NR-CQDs) as an efficient energy-down-shifting layer. A unique hollow and conjugated structure of NR-CQDs was designed to achieve a large Stokes shift (UV-excited red emission) with a quantum yield (QY) comparable to Cd/Pb QDs. A highly uniform coating of intrinsically negatively charged NR-CQDs on c-Si SCs was achieved by cationizing the c-Si SC by bovine serum albumin (BSA) under mildly acidic conditions. By an opposite-charge-assisted, self-assembled overlayer, the short-circuit current density (J_sc) and power-conversion efficiency were increased by 5.8%, which is attributed to the large Stokes shift (255 nm) and high QY. Blue-emissive undoped carbon QDs were synthesized for comparison with the proposed NR-CQDs to elucidate the significance of the novel proposed structure.

Tuning Organelle Specificity and Photodynamic Therapy Efficiency by Molecular Function Design

Efficient organic photosensitizers (PSs) have attracted much attention because of their promising applications in photodynamic therapy (PDT). However, guidelines on their molecular design are rarely reported. In this work, a series of PSs are designed and synthesized based on a triphenylamine-azafluorenone core. Their structure-property-application relationships are systematically studied. Cationization is an effective strategy to enhance the PDT efficiency of PSs by targeting mitochondria. From the molecularly dispersed state to the aggregate state, the fluorescence and the reactive oxygen species generation efficiency of PSs with aggregation-induced emission (AIE) increase due to the restriction of the intramolecular motions and enhancement of intersystem crossing. Cationized mitochondrion-targeting PSs show higher PDT efficiency than that of nonionized ones targeting lipid droplets. The ability of AIE PSs to kill cancer cells can be further enhanced by combination of PDT with radiotherapy. Such results should trigger research enthusiasm for designing and synthesizing AIE PSs with better PDT efficiency and properties.

High-Quality Images Inkjetted on Different Woven Cotton Fabrics Cationized with P(St-BA-VBT) Copolymer Nanospheres

The porosity, roughness, and thickness of woven fabrics limit inkjet printing quality, which is extremely important for obtaining high-quality inkjet printing images on fabrics. This study reveals the application of poly[styrene-butyl acrylate-(P-vinylbenzyl trimethyl ammonium chloride)] nanospheres prepared via a soap-free emulsion polymerization approach as a novel kind of the cationization modifier for the inkjet printing of different woven cotton fabrics by the pad-cure process. It was found that the nanospheres exhibited an average diameter of 65.5 nm, a zeta potential of +57.8 mV, and a glass transition temperature of 94.7 °C. The nanospheres deposited on three cotton fabrics through the dip-rolling process, resulting in the increase of zeta potential, hydrophobicity and thickness of the fabric, and the decrease of porosity and roughness. The high-quality inkjet printing images can be obtained on fabrics with different structures owing to the differences in zeta potential, hydrophobicity, porosity, roughness, and thickness of fabrics. The plain, twill, and honeycomb weave fabrics obtained high-quality inkjet printing images for portraits, oil paintings, and landscape paintings, respectively. The nanospheres could strongly adsorb on the fiber by electrostatic attraction. The reactive dye molecules in the inks could react with the cationized fibers by electrostatic attractive force, resulting in the increase of the color strength, fixation rates, and outline sharpness. The nanosphere cationization of different woven fabrics offers a new potential method for obtaining high-quality patterns without significantly affecting the fabric handle.

Ion mobility-mass spectrometry analysis of diarylquinoline diastereomers: Drugs used for tuberculosis treatment

Mycobacterium tuberculosis infection results in more than two million deaths per year and is the leading cause of mortality in people infected with HIV. A new structural class of antimycobacterials, the diarylquinolines, has been synthesized and is being highly effective against both M. tuberculosis and multidrug-resistant tuberculosis. As diarylquinolines are biologically active only under their ( R,S) stereoisomeric form, it is essential to differentiate the stereoisomers ( R,S) and ( R,R). To achieve this, tandem mass spectrometry and ion mobility spectrometry-mass spectrometry have been performed with 10 diarylquinoline diastereomers couples. In this study, we investigated cationization with alkali metal cations and several ion mobility drift gases in order to obtain diastereomer differentiations. We have shown that diastereomers of the diarylquinolines family can be differentiated separately by tandem mass spectrometry and in mixture by ion mobility spectrometry-mass spectrometry. However, although the structure of each diastereomer is close, several behaviors could be observed concerning the cationization and the ion mobility spectrometry separation. The ion mobility spectrometry isomer separation efficiency is not easily predictable; it was however observed for all diastereomeric couples with a significant improvement of separation using alkali adducts compared to protonated molecules. With the use of drift gas with higher polarizability only an improvement of separation was obtained in a few cases. Finally, a good correlation of the experimental collision cross section (relative to three-dimensional structure of ions) and the theoretical collision cross section has been shown.

A Sensitive LC-MS/MS Method for Palytoxin Using Lithium Cationization

Palytoxin (PlTX) and analogues are produced by certain dinoflagellates, sea anemones, corals and cyanobacteria. PlTX can accumulate in the food chain and when consumed it may cause intoxication with symptoms like myalgia, weakness, fever, nausea, and vomiting. The analysis of PlTXs is challenging, and because of the large molecular structure, it is difficult to develop a sensitive and selective liquid chromatography-mass spectrometry (LC-MS/MS) method. In this work, an LC-MS/MS method was developed to analyse PlTXs with use of lithium iodine and formic acid as additives in the mobile phase. For method development, initially, LC-hrMS was used to accurately determine the elemental composition of the precursor and product ions. The main adduct formed was [M + H + 2Li]³⁺. Fragments were identified with LC-hrMS and these were incorporated in the LC-MS/MS method. A method of 10 min was developed and a solid phase extraction clean-up procedure was optimised for shellfish matrix. The determined limits of detection were respectively 8 and 22 µg PlTX kg^-1 for mussel and oyster matrix. Oysters gave a low recovery of approximately 50% for PlTX during extraction. The method was successfully in-house validated, repeatability had a relative standard deviation less than 20% (n = 5) at 30 µg PlTX kg^-1 in mussel, cockle, and ensis, and at 60 µg PlTX kg^-1 in oyster.

Effect of Cotton Cationization Using Copolymer Nanospheres on Ink-Jet Printing of Different Fabrics

In this study, the cationic Poly[Styrene-Butyl acrylate-(P-vinylbenzyl trimethyl ammonium chloride)] P(St-BA-VBT) nanospheres with N⁺(CH₃)₃ functional groups were successfully synthesized by soap-free emulsion polymerization and applied to different fabrics by pad-cure process. After the pad-cure process, the nanospheres were deposited on the surface of the modified cotton fibers successfully without forming a continuous film structure. The X-ray Photoelectron Spectroscopy (XPS) and the Fourier transform infrared (FTIR) results demonstrated that P(St-BA-VBT) nanospheres were adsorbed on the surface of cotton fibers successfully. The excellent color strength value and outline sharpness of the plain, twill, and honeycomb fabrics can be achieved when the nanosphere concentration, sodium bicarbonate, and steaming time were 1 g/L, 10 g/L, and 6 min, respectively. The plain fabrics exhibited the smallest color strength (K/S) values and the best outline sharpness, followed by twill and honeycomb fabrics, which displayed the largest K/S values and the worst outline sharpness after the same treatment. Besides, all the three fabrics showed excellent rubbing fastness and washing fastness. The cationic P(St-BA-VBT) nanospheres modification of the cotton fabrics provides a novel potential approach to obtain good printing efficiency without affecting the tensile breaking strength of cotton fabrics significantly.

Synthesis of Cationized Magnetoferritin for Ultra-fast Magnetization of Cells

Many important biomedical applications, such as cell imaging and remote manipulation, can be achieved by labeling cells with superparamagnetic iron oxide nanoparticles (SPIONs). Achieving sufficient cellular uptake of SPIONs is a challenge that has traditionally been met by exposing cells to elevated concentrations of SPIONs or by prolonging exposure times (up to 72 hr). However, these strategies are likely to mediate toxicity. Here, we present the synthesis of the protein-based SPION magnetoferritin as well as a facile surface functionalization protocol that enables rapid cell magnetization using low exposure concentrations. The SPION core of magnetoferritin consists of cobalt-doped iron oxide with an average particle diameter of 8.2 nm mineralized inside the cavity of horse spleen apo-ferritin. Chemical cationization of magnetoferritin produced a novel, highly membrane-active SPION that magnetized human mesenchymal stem cells (hMSCs) using incubation times as short as one minute and iron concentrations as lows as 0.2 mM.

Cytotoxicity of RNase Sa to the acute myeloid leukemia Kasumi-1 cells depends on the net charge

The majority of known cytotoxic RNases are basic proteins which destroy intracellular RNA. Cationization of RNases is considered to be an effective strategy for strengthening their antitumor properties. We constructed a set of RNase Sa variants consisting of charge reversal mutants, charge neutralization mutants, and variants with positively charged cluster at the N-terminus. All constructs retain a high level of catalytic activity and differ in net charge. Using acute myeloid leukemia cells Kasumi-1 we have shown that (i) cytotoxicity of RNase Sa mutants is linearly enhanced by cationization, (ii) the ability of cytotoxic mutants to induce cell death is caused by induction of apoptosis and (iii) localization of positive charge on N-terminus does not contribute to RNase Sa cytotoxicity. Capacity to induce apoptosis in malignant cells and the absence of necrotic effects make the RNase Sa mutants with high positive charge a suitable anti-cancer agent.