Printing of In Situ Functionalized Mesoporous Silica with Digital Light Processing for Combinatorial Sensing

Combinatorial sensing is especially important in the context of modern drug development to enable fast screening of large data sets. Mesoporous silica materials offer high surface area and a wide range of functionalization possibilities. By adding structural control, the combination of structural and functional control along all length scales opens a new pathway that permits larger amounts of analytes being tested simultaneously for complex sensing tasks. This study presents a fast and simple way to produce mesoporous silica in various shapes and sizes between 0.27-6 mm by using light-induced sol-gel chemistry and digital light processing (DLP). Shape-selective functionalization of mesoporous silica is successfully carried out either after printing using organosilanes or in situ while printing through the use of functional mesopore template for the in situ functionalization approach. Shape-selective adsorption of dyes is shown as a demonstrator toward shape selective screening of potential analytes.

Recent Advances in the Applications of Mesoporous Silica in Heterogenous Catalysis

Mesoporous silica is a class of silica material with a large specific surface area, high specific pore volume and meso-sized pores. These properties make mesoporous silica a good choice of...

Preparation of Monodispersed Nanoporous Eu(III)/Titania Loaded with Ibuprofen: Optimum Loading, Luminescence, and Sustained Release

Functional nanomaterials are one of the potential carriers for drug delivery, whereas there are many prerequisites for this purpose. The carrier should be monodispersed, be fluorescent, and have a proper nanostructure to keep/release drug molecules to achieve controlled release, although preparing a nanomaterial which fulfills all the demands is still very challenging. In this paper, we show the preparation of monodispersed nanoporous amorphous titania submicron particles with fluorescent property. They adsorb a model drug molecule-ibuprofen-with their surface coverage up to 100%. Such a perfect loading does not decrease the fluorescent intensity because of any quenching effects but even maximize it. We also demonstrate the release behavior of IBU into simulated body fluid. Interestingly, the present carrier releases most of IBU in 6 h, whereas that modified with the polyethylene glycol moiety takes 48 h to finish releasing IBU, indicating its potential for controlled release applications.

Metal-incorporated mesoporous oxides: Synthesis and applications

Mesoporous oxides are outstanding metal nanoparticle catalyst supports owing to their well-defined porous structures. Such mesoporous architectures not only prevent the aggregation of metal nanoparticles but also enhance their catalytic performance. Metal/metal oxide heterojunctions exhibit unique chemical and physical properties because of the surface reconstruction around the junction and electron transfer/interaction across the interface. This article reviews the methods used for synthesizing metal-supported hybrid nanostructures and their applications as catalysts for environmental remediation and sensors for detecting hazardous materials.

Bringing attention to metal (un)availability in encapsulated catalysts

The encapsulation method significantly affects the shell porosity, the availability of active sites and the catalytic behavior of Pd@SiO₂ materials in methane combustion.

Controllable integration of ultrasmall noble metal nanoparticles into mesoporous silica matrixes by a self-assembly method

Various noble metal nanoparticles smaller than 2 nm were immobilized into spherical mesoporous silica (30 nm) via a self-assembly method.

Highly Efficient Elimination of Carbon Monoxide with Binary Copper-Manganese Oxide Contained Ordered Nanoporous Silicas

Ordered nanoporous silicas containing various binary copper-manganese oxides were prepared as catalytic systems for effective carbon monoxide elimination. The carbon monoxide elimination efficiency was demonstrated as a function of the [Mn]/[Cu] ratio and reaction time. The prepared catalysts were characterized by Brunauer-Emmett-Teller (BET) method, small- and wide-angle X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HR-TEM) for structural analysis. Moreover, quantitative analysis of the binary metal oxides within the nanoporous silica was achieved by inductively coupled plasma (ICP). The binary metal oxide-loaded nanoporous silica showed high room temperature catalytic efficiency with over 98 % elimination of carbon monoxide at higher concentration ratio of [Mn]/[Cu].

Plasmon-mediated photothermal conversion by TiN nanocubes toward CO oxidation under solar light illumination

Titanium-nitride (TiN) nanocubes were decorated with platinum nanoparticles via a wet-chemistry route to yield TiN-supported Pt catalysts (Pt/TiN).

Multi-Stimuli-Responsive Polymeric Materials

Stimuli-responsive materials are of immense importance because of their ability to undergo alteration of their properties in response to their environment. The properties of such materials can be tuned by subtle adjustments in temperature, pH, light, and so forth. Among such smart materials, multi-stimuli-responsive polymeric materials are of pronounced significance as they offer a wide range of applications and their properties can be tuned through several mechanisms. Here, we aim to highlight some recent studies showcasing the multi-stimuli-responsive character of these polymers, which are still relatively little known compared to their single-stimuli-responsive counterpart.

Asymmetric block copolymers for supramolecular templating of inorganic nanospace materials

This review focuses on polymeric micelles consisting of asymmetric block copolymers as designed templates for several inorganic nanospace materials with a wide variety of compositions. The presence of chemically distinct domains of asymmetric triblock and diblock copolymers provide self-assemblies with more diverse morphological and functional features than those constructed by EOn POm EOn type symmetric triblock copolymers, thereby affording well-designed nanospace materials. This strategy can produce unprecedented nanospace materials, which are very difficult to prepare through other conventional organic templating approaches. Here, the recent development on the synthesis of inorganic nanospace materials are mainly focused on, such as hollow spheres, tubes, and porous oxides, using asymmetric triblock copolymers.

Controlling mesopore size and processability of transparent enzyme-loaded silica films for biosensing applications

Silica-based nanoporous thin films including large mesopores are relevant as enzyme supports for applications in biosensing. The diffusion and immobilization of large biomolecules such as enzymes in such porous films require the presence of large mesopores. Creating such morphologies based on a bottom-up synthesis using colloidal templates is a challenge in view of the combination of desired material properties and the robustness of the casting process for the fabrication of thin films. Here a strategy to reproducibly synthesize transparent porous silica thin films with submicrometer thickness and homogeneously distributed porosity is presented. For this purpose, polystyrene-poly-2-vinylpyridine (PS-P2VP) amphiphilic block copolymers are used as porogenic templates. Low-chain alcohols are employed as both selective solvents for the P2VP blocks and reaction media for silica synthesis. Rheology measurements reveal a strong influence of the block copolymer length on the behavior of PS-P2VP micelles in suspension. The pore distribution and accessibility into the film are controlled by adjusting the silica to block copolymer weight ratio. The solvent choice is shown to control not only the micelle size and the generated pore morphology but also the structural homogeneity of the films. Finally, the suitability of the synthesized films as supports for enzymes is tested using a model enzyme, horseradish peroxidase EC 1.11.1.7. Our approach is innovative, robust, and reproducible and provides a convenient alternative to synthesize large mesopores up to small macropores (20-100 nm) in nanostructured thin films with applications in biosensing and functional coatings.

Synthesis of dendrimer-templated Pt nanoparticles immobilized on mesoporous alumina for p-nitrophenol reduction

Dendrimer-templated mesoporous alumina-supported Pt nanocatalysts were prepared and used to catalyze reduction reaction after calcination at different temperatures in nitrogen.

A dual soft-template synthesis of hollow mesoporous silica spheres decorated with Pt nanoparticles as a CO oxidation catalyst

Hollow mesoporous silica spheres decorated with fine Pt nanoparticles are prepared through a dual soft-template system and used as a catalyst for high-temperature CO oxidation.