Strength in Numbers: A Giant NIR-II AIEgen with One-for-All Phototheranostic Features for Exceptional Orthotopic Bladder Cancer Treatment

One-for-all phototheranostics that allows the simultaneous implementations of multiple optical imaging and therapeutic modalities by utilizing a single component, is growing into a sparkling frontier in cancer treatment. Of particular interest is phototheranostic agent with emission in the second near-infrared (NIR-II) window. Nevertheless, the practical uses of those conventional NIR-II agents are severely impeded by their unsatisfactory features including insufficient stability, low synthetic yield, to be extended absorption/ emission wavelengths, and inefficient phototheranostic outcomes. Developing exceptional phototheranostic agents is thus highly desirable yet remains formidably challenging. Herein, we synthesized two novel N-heteroacenes-based NIR-II luminogens, namely 2TT-PPT and 4TT-PBPT, by respectively employing pyrene-fused phenaziothiadiazoles and pyrene-fused bisphenaziothiadiazoles as acceptor skeletons. There is strength in numbers by increasing the fusing rings in N-heteroacenes moieties and numbers of appended donors. Compared to less ring-fused 2TT-PPT, the giant molecule 4TT-PBPT shows improved photophysical characteristics, such as enhanced light absorbance, red-shifted wavelengths, higher brightness, favorable reactive oxygen species (ROS) generation, and elevated photothermal conversion efficiency, which render 4TT-PBPT nanoparticles excellent fluorescence-photoacoustic-photothermal trimodal imaging guided photodynamic-photothermal synergistic therapy for orthotopic bladder cancer.

Polarity-sensitive pyrene fluorescent probes for multi-organelle imaging in living cells

Polarity-sensitive probes (PAS) were synthesized through the attachment of azetidine and sulfonyl substituents to the pyrene fluorescent core. The emission peaks and fluorescence lifetimes of these PAS probes exhibit high sensitivity to polarity, enabling the visualization of microenvironmental characteristics and dynamics across multiple organelles.

Interlocked 2D Covalent Organic Frameworks from Overcrowded Nodes

A challenging aspect in the synthesis of covalent organic frameworks (COFs) that goes beyond the framework's structure and topology is interpenetration, where two or more independent frameworks are mechanically interlocked with each other. Such interpenetrated or interlocked frameworks are commonly found in three-dimensional (3D) COFs with large pores. However, interlocked two-dimensional (2D) COFs are rarely seen in the literature, as 2D COF layers typically crystallize in stacks that maximize stabilization through π-stacking. The few interlocked 2D COFs described to date have been derived from monomers with aryl groups arranged perpendicularly. Herein, we report an interlocked 2D COF derived from a new class of monomers constituted of sterically overcrowded polycyclic aromatic hydrocarbons. The formation of such an interlocked structure is ascribed to the presence and the bulkiness of the substituents that directly interfere with interlayer π-stacking. The microscopy, gas sorption, spectroscopic, and charge transport characterization are consistent with the absence of π-stacking, as imposed by the interlocked architecture. This work evidences how the use of overcrowded aromatic systems as monomers can generate mechanically interlocked 2D COFs, offering new avenues for the design of COFs with unconventional topologies.

Nanohoops in membranes: confined supramolecular spaces within phospholipid bilayer membranes

Nanohoops, an exciting class of fluorophores with supramolecular binding abilities, have the potential to become innovative tools within biological imaging and sensing. Given the biological importance of cell membranes, incorporation of macrocyclic materials with the dual capability of fluorescence emission and supramolecular complexation would be particularly interesting. A series of different-sized nanohoops-ethylene glycol-decorated [n]cyclo-para-pyrenylenes (CPYs) (n = 4-8)-were synthesised via an alternate synthetic route which implements a stannylation-based precursor, producing purer material than the previous borylation approach, enabling the growth of single-crystals of the Pt-macrocycle. Reductive elimination of these single-crystals achieved significantly higher selectivity and yields towards smaller ring-sized nanohoops (n = 4-6). The supramolecular binding capabilities of these CPYs were then explored through host-guest studies with a series of polycyclic (aromatic)hydrocarbons, revealing the importance of molecular size, shape, and CH-π contacts for efficient binding. CPYs were incorporated within the hydrophobic layer of lipid bilayer membranes, as confirmed by microscopic imaging and emission spectroscopy, which also demonstrated the size-preferential incorporation of the five-fold nanohoop. Molecular dynamics simulations revealed the position and orientation within the membrane, as well as the unique non-covalent threading interaction between nanohoop and phospholipid.

Palladium-Catalyzed Triple Suzuki-Miyaura Reactions Using Cyclic (Vinyl Triflate)iodonium Salts

By using cyclic (vinyl triflate)iodonium salts, a novel triple Suzuki-Miyaura reaction was accomplished for the synthesis of polyaromatic ethylene derivatives in the presence of palladium catalysts. The reaction exhibits extensive compatibility with a wide range of readily available arylboronic acids, giving triaryl-substituted ethylenes in good yields.

Manipulating Intramolecular Charge Transfer and Supramolecular Interaction in D-A-D Conjugated Systems by Regioisomerization

Three new donor-acceptor-donor (D-A-D) architecture regioisomers comprising a large planar electron-withdrawing core tribenzo[a,c,i]phenazine and two identical electron-donating triphenylamines with different substitution patterns were designed and synthesized. Employing this regioisomerization strategy, the intramolecular charge-transfer interactions are effectively tuned and result in a significant bathochromic shift of photoluminescence maximum over 100 nm, which induces the corresponding emission band extending into the near-infrared region as well as giving a high solid-state quantum yield of 25%. Meanwhile, it is found that the supramolecular interactions of this series of regioisomers with planar electron-donor pyrene are greatly affected by the substitution pattern.

Synthesis and Properties of 5,7-Diazaullazines

Hitherto unknown 5,8-substituted-pyrimido[4,5,6-ij]pyrrolo[2,1,5-de]quinolizines (5,7-diazaullazines) were prepared by a three-step synthesis via Clauson-Kaas, Sonogashira, and cycloisomerization reactions with diverse functionalization. The properties, including cyclovoltammetry and UV-vis and fluorescence spectroscopy, as well as solvatochromism, were studied for selected derivatives and supported by density functional theory calculations. Results were compared in detail with previously reported 5- and 6-azaullazines, and the impact of introduced nitrogen atoms was analyzed.

Molecular Graphene Nanoribbon Junctions

One of the challenges for the realization of molecular electronics is the design of nanoscale molecular wires displaying long-range charge transport. Graphene nanoribbons are an attractive platform for the development of molecular wires with long-range conductance owing to their unique electrical properties. Despite their potential, the charge transport properties of single nanoribbons remain underexplored. Herein, we report a synthetic approach to prepare N-doped pyrene-pyrazinoquinoxaline molecular graphene nanoribbons terminated with diamino anchoring groups at each end. These terminal groups allow for the formation of stable molecular graphene nanoribbon junctions between two metal electrodes that were investigated by scanning tunneling microscope-based break-junction measurements. The experimental and computational results provide evidence of long-range tunneling charge transport in these systems characterized by a shallow conductance length dependence and electron tunneling through >6 nm molecular backbone.

Nonsymmetric Pyrene-Fused Pyrazaacenes via Green Oxidation of 2,7-Di-tert-butylpyrene

We disclose a four-step oxidize-condense-oxidize-condense synthesis pathway to prepare nonsymmetric pyrene-fused pyrazaacenes (PPAs) using our recently discovered oxidation conditions for 2,7-di-tert-butylpyrene. The new pathway results in marked improvements in yields and simplifies purification as compared with the sequential condensation strategy previously employed to make these compounds.

Rh(III)-catalyzed selective mono- and dual-functionalization/cyclization of 1-aryl-5-aminopyrazoles with iodonium ylides

An efficient Rh(III)-catalyzed selective mono- and dual-C-H bond functionalization/cyclization with iodonium ylide as a single coupling partner was demonstrated, in which fused benzodiazepine skeletons were obtained in excellent yields. This method greatly improved an effective approach to dual C-H unsymmetrical functionalization.

Pyrene-bridged acenaphthenes: synthesis and properties of a diacenaphtho[1,2-e:1',2'-l]pyrene and its symmetrical nitrogen analogue

The considerable need for novel polyaromatic hydrocarbons (PAHs) for applications in the area of organic electronics remains unchanged. Diacenaphthopyrene represents a new PAH consisting of two acenaphthylene units connected by a pyrene bridge. The system is built up by Pd-catalyzed cross-coupling, followed by acid catalyzed cyclosiomerization to generate the pyrene moiety. The new fused scaffold is formed in the last step in convincing yields by means of CH-activation. We additionally synthesized one aza-pyrene based analogue. The two hitherto unknown PAHs were investigated in detail by UV-Vis and PL spectroscopy, CV measurements and DFT calculations. Based on these results, the abilities of the novel structure as well as the effect of incorporation of nitrogen were evaluated.

The magic of biaryl linkers: the electronic coupling through them defines the propensity for excited-state symmetry breaking in quadrupolar acceptor-donor-acceptor fluorophores

Charge transfer (CT) is key for molecular photonics, governing the optical properties of chromophores comprising electron-rich and electron-deficient components. In photoexcited dyes with an acceptor-donor-acceptor or donor-acceptor-donor architecture, CT breaks their quadrupolar symmetry and yields dipolar structures manifesting pronounced solvatochromism. Herein, we explore the effects of electronic coupling through biaryl linkers on the excited-state symmetry breaking of such hybrid dyes composed of an electron-rich core, i.e., 1,4-dihydropyrrolo[3,2-b]pyrrole (DHPP), and pyrene substituents that can act as electron acceptors. Experimental and theoretical studies reveal that strengthening the donor-acceptor electronic coupling decreases the CT rates and the propensity for symmetry breaking. We ascribe this unexpected result to effects of electronic coupling on the CT thermodynamics, which in its turn affects the CT kinetics. In cases of intermediate electronic coupling, the pyrene-DHPP conjugates produce fluorescence spectra, spreading over the whole visible range, that in addition to the broad CT emission, show bands from the radiative deactivation of the locally excited states of the donor and the acceptors. Because the radiative deactivation of the low-lying CT states is distinctly slow, fluorescence from upper locally excited states emerge leading to the observed anti-Kasha behaviour. As a result, these dyes exhibit white fluorescence. In addition to demonstrating the multifaceted nature of the effects of electronic coupling on CT dynamics, these chromophores can act as broad-band light sources with practical importance for imaging and photonics.

Isomer Effect on Energy Storage of π-Extended S-Shaped Double[6]Heterohelicene

Recently, chiral and nonplanar cutouts of graphene have been the favorites due to their unique optical, electronic, and redox properties and high solubility compared with their planar counterparts. Despite the remarkable progress in helicenes, π-extended heterohelicenes have not been widely explored. As an anode in a lithium-ion battery, the racemic mixture of π-extended double heterohelical nanographene containing thienothiophene core exhibited a high lithium storage capability, attaining a specific capacity of 424 mAh g-1 at 0.1 A g-1 with excellent rate capability and superior long-term cycling performance over 6000 cycles with negligible fade. As a first report, the π-extended helicene isomer (PP and MM), with the more interlayer distance that helps faster diffusion of ions, has exhibited a high capacity of 300 mAh g-1 at 2 A g-1 with long-term cycling performance over 1500 cycles compared to the less performing MP and PM isomer and racemic mixture (150 mAh g-1 at 2 A g-1 ). As supported by single-crystal X-ray analysis, a unique molecular design of nanographenes with a fixed (helical) molecular geometry, avoiding restacking of the layers, renders better performance as an anode in lithium-ion batteries. Interestingly, the recycled nanographene anode material displayed comparable performance.

Photoinduced asymmetric charge trapping in a symmetric tetraazapyrene-fused bis(tetrathiafulvalene) conjugate

In fused donor-acceptor (D-A) ensembles, rapid charge recombination often occurs because the D and A units are spatially close and strongly coupled. To the best of our knowledge, a long-lived charge separated (CS) state is still elusive in such systems. The results presented here show that symmetric annulation of two tetrathiafulvalene (TTF) donors to a central tetraazapyrene (TAP) acceptor via two quinoxaline units leads to a CS state lifetime of a few ns. A detailed study of the electronic interactions between TTF and TAP units in the ground and excited states was performed and compared with the asymmetric counterpart by cyclic voltammetry, optical absorption and ultrafast transient absorption spectroscopy. The results demonstrate that the photoinduced asymmetric charge trapping between two TTFs significantly stabilizes the CS state, which is also verified theoretically.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

Design and Synthesis of a Polyketone Building Block with Vinyl Groups-9,10-Diethyl-9,10-ethenoanthracene-2,3,6,7(9H,10H)-tetraone-and a Preliminary Photoelectrical Property Study of Its Azaacene Derivatives

Polyketone compounds are powerful building blocks to synthesize various organic functional materials. Despite that a great many number of planar and non-planar polyketone building blocks have been developed, one issue is that generally there are only ketone functional groups on the molecular skeleton, which will constrain their transformation and further limit the development of functional materials. In this work, we report the design and synthesis of a building block 9,10-diethyl-9,10-ethenoanthracene-2,3,6,7(9H,10H)-tetraone with additional vinyl functional groups. In addition, its azaacene derivatives were also synthesized, and their preliminary physicochemical properties were studied.

Modulating Strain in Twisted Pyrene-Fused Azaacenes

The design and synthesis of strained aromatics provide an additional insight into the relationship between structure and properties. In the last years, several approaches to twist pyrene-fused azaacenes have been developed that allow to introduce twists of different sizes. Herein, we describe the synthesis of a new set of twisted dibenzotetraazahexacenes constituted by fused pyrene and quinoxaline residues that have been distorted by introducing increasingly larger substituents on the quinoxaline residues. Their twisted structure has been demonstrated by single-crystal X-ray diffraction. Furthermore, absorption, fluorescence, electrochemical and theoretical studies shine light on the effects of the substituents and twists on the optoelectronic and redox properties.

Exciplex Emission and Förster Resonance Energy Transfer in Polycyclic Aromatic Hydrocarbon-Based Bischromophoric Cyclophanes and Homo[2]catenanes

Energy transfer and exciplex emission are not only crucial photophysical processes in many living organisms but also important for the development of smart photonic materials. We report, herein, the rationally designed synthesis and characterization of two highly charged bischromophoric homo[2]catenanes and one cyclophane incorporating a combination of polycyclic aromatic hydrocarbons, i.e., anthracene, pyrene, and perylene, which are intrinsically capable of supporting energy transfer and exciplex formation. The possible coconformations of the homo[2]catenanes, on account of their dynamic behavior, have been probed by Density Functional Theory calculations. The unique photophysical properties of these exotic molecules have been explored by steady-state and time-resolved absorption and fluorescence spectroscopies. The tetracationic pyrene-perylene cyclophane system exhibits emission emanating from a highly efficient Förster resonance energy transfer (FRET) mechanism which occurs in 48 ps, while the octacationic homo[2]catenane displays a weak exciplex photoluminescence following extremely fast (<0.3 ps) exciplex formation. The in-depth fundamental understanding of these photophysical processes involved in the fluorescence of bischromophoric cyclophanes and homo[2]catenanes paves the way for their use in future bioapplications and photonic devices.

Building Blocks and COFs Formed in Concert-Three-Component Synthesis of Pyrene-Fused Azaacene Covalent Organic Framework in the Bulk and as Films

A three-component synthesis methodology is described for the formation of covalent organic frameworks (COFs) containing extended aromatics. Notably, this approach enables synthesis of the building blocks and COF along parallel reaction landscapes, on a similar timeframe. The use of fragmental building block components, namely pyrene dione diboronic acid as aggregation-inducing COF precursor and the diamines o-phenylenediamine (Ph), 2,3-diaminonaphthalene (Naph), or (1R,2R)-(+)-1,2-diphenylethylenediamine (2Ph) as extending functionalization units in conjunction with 2,3,6,7,10,11-hexahydroxytriphenylene, resulted in the formation of the corresponding pyrene-fused azaacene, i.e., Aza-COF series with full conversion of the dione moiety, long-range order, and high surface area. In addition, the novel three-component synthesis was successfully applied to produce highly crystalline, oriented thin films of the Aza-COFs with nanostructured surfaces on various substrates. The Aza-COFs exhibit light absorption maxima in the blue spectral region, and each Aza-COF presents a distinct photoluminescence profile. Transient absorption measurements of Aza-Ph- and Aza-Naph-COFs suggest ultrafast relaxation dynamics of excited-states within these COFs.

Biasing Divergent Polycyclic Aromatic Hydrocarbon Oxidation Pathway by Solvent-Free Mechanochemistry

Precise control in reaction selectivity is the goal in modern organic synthesis, and it has been widely studied throughout the synthetic community. In comparison, control of divergent reactivity of a given reagent under different reaction conditions is relatively less explored aspect of chemical selectivity. We herein report an unusual reaction between polycyclic aromatic hydrocarbons and periodic acid H₅IO₆ (1), where the product outcome is dictated by the choice of reaction conditions. That is, reactions under solution-based condition give preferentially C-H iodination products, while reactions under solvent-free mechanochemical condition provide C-H oxidation quinone products. Control experiments further indicated that the iodination product is not a reaction intermediate toward the oxidation product and vice versa. Mechanistic studies unveiled an in situ crystalline-to-crystalline phase change in 2 during ball-milling treatment, where we assigned it as a polymeric hydrogen-bond network of 1. We believe that this polymeric crystalline phase shields the more embedded electrophilic I═O group of 1 from C-H iodination and bias a divergent C-H oxidation pathway (with I═O) in the solid state. Collectively, this work demonstrates that mechanochemistry can be employed to completely switch a reaction pathway and unmask hidden reactivity of chemical reagents.

Electrochemical Syntheses of Polycyclic Aromatic Hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) have surfaced as increasingly viable components in optoelectronics and material sciences. The development of highly efficient and atom-economic tools to prepare PAHs under exceedingly mild conditions constitutes a long-term goal. Traditional syntheses of PAHs have largely relied on multistep approaches or the conventional Scholl reaction. However, Scholl reactions are largely inefficient with electron-deficient substrates, require stoichiometric chemical oxidants, and typically occur in the presence of strong acid. In sharp contrast, electrochemistry has gained considerable momentum during the past decade as an alternative for the facile and straightforward PAHs assembly, generally via electro-oxidative dehydrogenative annulation, releasing molecular hydrogen as the sole stoichiometric byproduct by the hydrogen evolution reaction. This review provides an overview on the recent and significant advances in the field of electrochemical syntheses of various PAHs until January 2023.

Electrosynthesis of Au nanocluster embedded conductive polymer films at soft interfaces using dithiafulvenyl-functionalized pyrene

Nanoparticle (NP) embedded conductive polymer films are desirable platforms for electrocatalysis as well as biomedical and analytical applications. Increased catalytic and analytical performance is accompanied by concomitant decreases in NP size. Herein, highly reproducible electrogeneration of low dispersity Au nanocluster embedded ultra-thin (∼2 nm) conductive polymer films at a micro liquid|liquid interface is demonstrated. Confinement at a micropipette tip facilitates a heterogeneous electron transfer process across the interface between two immiscible electrolyte solutions (ITIES), between KAuCl₄(aq) and a dithiafulvenyl-substituted pyrene monomer, 4,5-didecoxy-1,8-bis(dithiafulven-6-yl)pyrene (bis(DTF)pyrene), in oil, i.e., a w|o interface. At a large ITIES the reaction is spontaneous, rapid, and proceeds via transfer of AuCl₄^- to the oil phase, followed by homogeneous electron transfer generating uncontrolled polymer growth with larger (∼50 nm) Au nanoparticles (NPs). Thus, miniaturization facilitates external, potential control and limits the reaction pathway. Atomic (AFM) and Kelvin probe force microscopies (KPFM) imaged the topography and work function distribution of the as-prepared films. The latter was linked to nanocluster distribution.

Azaarenes: 13 Rings in a Row by Cyclopentannulation

Cyclopentannulation was explored as a strategy to access large, stable azaarenes. Buchwald-Hartwig coupling of previously reported di- and tetrabrominated cyclopentannulated N,N'-dihydrotetraazapentacenes furnished stable azaarenes with up to 13 six-membered rings in a row and a length of 3.1 nm. Their optoelectronic and semi-conducting properties as well as their aromaticity were investigated.

A Crystalline 1D Dynamic Covalent Polymer

The synthesis of crystalline one-dimensional polymers provides a fundamental understanding about the structure-property relationship in polymeric materials and allows the preparation of materials with enhanced thermal, mechanical, and conducting properties. However, the synthesis of crystalline one-dimensional polymers remains a challenge because polymers tend to adopt amorphous or semicrystalline phases. Herein, we report the synthesis of a crystalline one-dimensional polymer in solution by dynamic covalent chemistry. The structure of the polymer has been unambiguously confirmed by microcrystal electron diffraction that together with charge transport studies and theoretical calculations show how the π-stacked chains of the polymer generate optimal channels for charge transport.

Redox-Switchable Complexes Based on Nanographene-NHCs

A series of rhodium and iridium complexes with a N-heterocyclic carbene (NHC) ligand decorated with a perylene-diimide-pyrene moiety are described. Electrochemical studies reveal that the complexes can undergo two successive one-electron reduction events, associated to the reduction of the PDI moiety attached to the NHC ligand. The reduction of the ligand produces a significant increase on its electron-donating character, as observed from the infrared spectroelectrochemical studies. The rhodium complex was tested in the [3+2] cycloaddition of diphenylcyclopropenone and methylphenylacetylene, where it displayed a redox-switchable behavior. The neutral complex showed moderate activity, which was suppressed when the catalyst was reduced.

Doubling the Length of the Longest Pyrene-Pyrazinoquinoxaline Molecular Nanoribbons

Molecular nanoribbons are a class of atomically-precise nanomaterials for a broad range of applications. An iterative approach that allows doubling the length of the longest pyrene-pyrazinoquinoxaline molecular nanoribbons is described. The largest nanoribbon obtained through this approach-with a 60 linearly-fused ring backbone (14.9 nm) and a 324-atoms core (C276 N48 )-shows an extremely high molar absorptivity (values up to 1 198 074 M-1  cm-1 ) that also endows it with a high molar fluorescence brightness (8700 M-1  cm-1 ).

Depositing Molecular Graphene Nanoribbons on Ag(111) by Electrospray Controlled Ion Beam Deposition: Self-Assembly and On-Surface Transformations

The chemical processing of low-dimensional carbon nanostructures is crucial for their integration in future devices. Here we apply a new methodology in atomically precise engineering by combining multistep solution synthesis of N-doped molecular graphene nanoribbons (GNRs) with mass-selected ultra-high vacuum electrospray controlled ion beam deposition on surfaces and real-space visualisation by scanning tunnelling microscopy. We demonstrate how this method yields solely a controllable amount of single, otherwise unsublimable, GNRs of 2.9 nm length on a planar Ag(111) surface. This methodology allows for further processing by employing on-surface synthesis protocols and exploiting the reactivity of the substrate. Following multiple chemical transformations, the GNRs provide reactive building blocks to form extended, metal-organic coordination polymers.

Ratiometric Flapping Force Probe That Works in Polymer Gels

Polymer gels have recently attracted attention for their application in flexible devices, where mechanically robust gels are required. While there are many strategies to produce tough gels by suppressing nanoscale stress concentration on specific polymer chains, it is still challenging to directly verify the toughening mechanism at the molecular level. To solve this problem, the use of the flapping molecular force probe (FLAP) is promising because it can evaluate the nanoscale forces transmitted in the polymer chain network by ratiometric analysis of a stress-dependent dual fluorescence. A flexible conformational change of FLAP enables real-time and reversible responses to the nanoscale forces at the low force threshold, which is suitable for quantifying the percentage of the stressed polymer chains before structural damage. However, the previously reported FLAP only showed a negligible response in solvated environments because undesirable spontaneous planarization occurs in the excited state, even without mechanical force. Here, we have developed a new ratiometric force probe that functions in common organogels. Replacement of the anthraceneimide units in the flapping wings with pyreneimide units largely suppresses the excited-state planarization, leading to the force probe function under wet conditions. The FLAP-doped polyurethane organogel reversibly shows a dual-fluorescence response under sub-MPa compression. Moreover, the structurally modified FLAP is also advantageous in the wide dynamic range of its fluorescence response in solvent-free elastomers, enabling clearer ratiometric fluorescence imaging of the molecular-level stress concentration during crack growth in a stretched polyurethane film.

A pyrene-pyridyl nanooligomer as a methoxy-triggered reactive probe for highly specific fluorescence assaying of hypochlorite

A novel pyrene-pyridyl conjugated oligomer (OPP-OMe) was conveniently prepared by one-pot Sonogashira coupling. Intriguingly, it was found that introducing only one methoxy moiety at the 4-pyridyl position can be sufficient for creating an oligomer-based ultrafine reactive fluorescent nanoprobe, i.e., OPP-OMe NPs (ca. 2.5 nm in diameter). Spectral analyses and elucidation of the intermediate structure revealed that the methoxy triggered-oxidation, together with nanoaggregation of OPP-OMe NPs, results in rapid, specific and supersensitive sensing of hypochlorite (LOD, 0.3 nM, S/N = 3).

Inducing Single-Handed Helicity in a Twisted Molecular Nanoribbon

Molecular conformation has an important role in chemistry and materials science. Molecular nanoribbons can adopt chiral twisted helical conformations. However, the synthesis of single-handed helically twisted molecular nanoribbons still represents a considerable challenge. Herein, we describe an asymmetric approach to induce single-handed helicity with an excellent degree of conformational discrimination. The chiral induction is the result of the chiral strain generated by fusing two oversized chiral rings and of the propagation of that strain along the nanoribbon's backbone.

Optical Study of Solvatochromic Isocyanoaminoanthracene Dyes and 1,5-Diaminoanthracene

Isocyanoaminoarenes (ICAAr-s) are a novel and versatile group of solvatochromic fluorophores. Despite their versatile applicability, such as antifungals, cancer drugs and analytical probes, they still represent a mostly unchartered territory among intramolecular charge-transfer (ICT) dyes. The current paper describes the preparation and detailed optical study of novel 1-isocyano-5-aminoanthrace (ICAA) and its N-methylated derivatives along with the starting 1,5-diaminoanthracene. The conversion of one of the amino groups of the diamine into an isocyano group significantly increased the polar character of the dyes, which resulted in a significant 50-70 nm (2077-2609 cm-1) redshift of the emission maximum and a broadened solvatochromic range. The fluorescence quantum yield of ICAAs is strongly influenced by the polarity of the solvent. The starting anthracene-diamine is highly fluorescent in every solvent (√f = 12-53%), while the isocyano derivatives are practically nonfluorescent in solvents more polar than dioxane. This phenomenon implies the potential application of ICAAs to probe the polarity of the medium and is favorable in practical applications, such as cell-staining, resulting in a reduced background fluorescence. The ICT character of the emission states of ICAAs are in good agreement with the computational findings presented in TD-DFT calculations and molecular electrostatic potential (MESP) isosurfaces.

An Expanded 2D Fused Aromatic Network with 90-Ring Hexagons

Two-dimensional fused aromatic networks (2D FANs) have emerged as a highly versatile alternative to holey graphene. The synthesis of 2D FANs with increasingly larger lattice dimensions will enable new application perspectives. However, the synthesis of larger analogues is mostly limited by lack of appropriate monomers and methods. Herein, we describe the synthesis, characterisation and properties of an expanded 2D FAN with 90-ring hexagons, which exceed the largest 2D FAN lattices reported to date.

Azepine- or Oxepine-embedded Double Saddle-Helix Nanographenes

The azepine- and oxepine-embedded polycyclic aromatic hydrocarbons (PAH) 1-3, as the hexa-peri-hexabenzocoronene (HBC)-based nanographenes (NG) were designed and synthesized by Diels-Alder reaction of cyclic alkene with tetrachlorothiophene-S,S-dioxide, followed by Suzuki-Miyaura cross-coupling and Scholl-type cyclodehydrogenation. Due to the strained seven-membered ring and the inherent structural pattern, heteroatom-doped NGs 1-3 show C_s symmetrical, double saddle-helix hybrid conformation, which represents a new shape for HBC based nanographenes. The calculation studies reveal the low aromaticity of the 8π heterocycles themselves and the heterocycles also decrease the electron delocalization of benzenes surrounding them. Dynamics-based calculation suggests the C_s symmetry would maintain druing the saddle-inversion process. Meanwhile, we show property perturbation by doping with different heteroatoms.

A Modular Cascade Synthetic Strategy Toward Structurally Constrained Boron-Doped Polycyclic Aromatic Hydrocarbons

A novel synthetic strategy was developed for the construction of difficult-to-access structurally constrained boron-doped polycyclic aromatic hydrocarbons (sc-B-PAHs) via a cascade reaction from the readily available ortho-aryl-substituted diarylalkynes. This domino process involves borylative cyclization, 1,4-boron migration and successive two-fold electrophilic borylation. Two types of sc-B-PAHs bearing B-doped [4]helicene (1 a-1 i) or BN-doped [4]helicene (1 n-1 t) and double [4]helicene (1 u-1 v) are constructed by this cascade reaction. Remarkably, this synthetic strategy is characterized by modest yields (20-50 %) and broad substrate scope (18 examples) with versatile functional group tolerance. The resultant sc-B-PAHs show good stability under ambient conditions and are thoroughly investigated by X-ray crystallography, UV/Vis absorption and fluorescence spectroscopy, and cyclic voltammetry. Interestingly enough, BN-doped [4]helicene 1 o forms a unique alternating π-stacked dimer of enantiomers within a helical columnar superstructure, while BN-doped double [4]helicene 1 u establishes an unprecedented π-stacked trimeric sandwich structure with a rare 2D lamellar π-stacking. The synthetic approach reported herein represents a powerful tool for the rapid generation of novel sc-B-PAHs, which are highly attractive for the elucidation of the structure-property relationship and for potential optoelectronic applications.

Confining the Inner Space of Strained Carbon Nanorings

Strained aromatic macrocycles based on cycloparaphenylenes (CPPs) are the shortest repeating units of armchair single-walled carbon nanotubes. Since the development of several new synthetic methodologies for accessing these structures, their properties have been extensively studied. Besides the fundamental interest in these novel molecular scaffolds, their application in the field of materials science is an ongoing topic of research. Most of the reported CPP-type macrocycles display strong binding toward fullerenes, due to the perfect match between the convex and concave π-surfaces of fullerenes and CPPs, respectively. Highly functionalized CPP derivatives capable of supramolecular binding with other molecules are rarely reported. The synthesis of highly functionalized [n]cyclo-2,7-pyrenylenes leads to CPP-type macrocycles with a defined cavity capable of binding non-fullerene guests with high association constants.

Access to fused π-extended acridone derivatives through a regioselective oxidative demethylation

The oxidative demethylation of ortho-dimethoxyacridone with ceric ammonium nitrate (CAN) regioselectively furnished an ortho-quinone leaving a methoxyl group unreacted, which further condensed with aromatic ortho-diamines to afford angularly fused π-extended acridone derivatives. Crystallographic analysis reveals the distinct manner of molecular packing in the crystals according to the dimension of π-extension. The benzene at the turning point possesses a shorter outer bond and a longer inner bond, which affects molecular conjugation and results in weakened aromaticity.

The Pyrazinacenes

Pyrazinacenes are a class of nitrogen-containing heteroacene molecules composed of linearly fused pyrazine units, which might also include dihydropyrazine groups leading to different reduced states of the compounds. While they are structurally similar to hydrocarbon acenes (e.g., pentacene) the presence of increasing numbers of N-heteroatoms introduces several different additional features of the compounds so that they can be considered for investigations beyond those suggested for acenes (i.e., organic field-effect transistors, solar cell components). Pyrazinacenes are in several ways complementary to C-H-only acenes based on the increasing stability of reduced states of the compounds with increasing numbers of fused pyrazine rings, although an acene-like electronic structure persists in the compounds so far studied. However, the introduction of multiple N atoms leads to properties that depart from C-H-only acenes. In particular, the compounds exhibit a delocalization of NH protons in extended reduced compounds and oxidation state switchability in solution and at interfaces. The presence of NH groups also allows an easy introduction of solubilizing groups at the pyrazinacene chromophore. In this Account, we will describe the preparation of extended pyrazinacenes from dipyrazino[2,3-b:2',3'-e]pyrazine (1,4,5,8,9,10-hexaazaanthracene; N6) derivatives up to 1,4,5,6,7,8,9,12,13,14,15,16,17,18-tetradecaazaheptacene (N14) and also assess structures of the relevant compounds based on X-ray crystallographic studies. Emergent properties of the molecules include highly unusual linear tautomeric processes based on a delocalization of protons (and the corresponding formation of orbitals based on multiple adjacent N lone electron pair interactions), which suggest special transport properties based on molecular protonics. Molecules such as decazapentacene (N10) exhibit multistability of oxidation state, and this is predicted to promote the redox catalytic properties of the compounds. The oxidation-state switching of on-surface processes is also described and has been investigated using scanning tunneling microscopy. The longest known pyrazinacene chromophore (N14) exhibits amphiprotism with its state of protonation being strongly coupled to its fluorescence emission properties in the near-infrared region indicating possible uses in pH-coupled bioimaging applications. The synthesis of the pyrazinacenes is flexible and allows the preparation of symmetrically or unsymmetrically substituted derivatives for the development of more complex molecules and for control of the electronic structure of the acene unit. Overall, the pyrazinacenes represent an emerging class of highly nitrogenous heteroacenes with unique properties and excellent potential for development in different applications based on their special supramolecular properties including guest binding or interactions in biological systems.

Pentagon-Containing π-Expanded Systems: Synthesis and Photophysical Properties

We have designed and synthesized three novel twistacene-modified enlarged pentagon-containing π-systems (6 and 9) with mismatched structures. The introduction of electron-withdrawing cyclopenta rings in the parent skeleton effectively stabilizes the electron-rich arenes. Their optoelectronic properties were studied via ultraviolet-visible (UV-vis) absorption spectra, fluorescence spectra, cyclic voltammetry, and density functional theory (DFT) calculation. In addition, chemical oxidation of the as-prepared compounds with nitrosonium hexafluoroantimonate could form the corresponding cationic radicals.