Nanogold plasmonic photocatalysis for organic synthesis and clean energy conversion

Donor-acceptor type triphenylamine-based porous aromatic frameworks (TPA-PAFs) for photosynthesis of benzimidazoles

The development of efficient and recyclable photocatalysts for organic synthesis is of great interest. This study presents the synthesis of triphenylamine-based porous aromatic frameworks (TPA-PAFs) in an alternating donor-acceptor (D-A) manner. The light absorption range and the optical band gaps of TPA-PAFs are effectively tuned by changing the electron acceptor units, which further determine their photocatalytic properties. As a result, TPA-PAFs exhibit excellent catalytic performance for the photosynthesis of benzimidazoles in high yields (up to 99%), broad substrate scope (18 examples), and good recyclability (up to 10 cycles). This work provides a feasible approach toward the facile design and synthesis of efficient and stable PAF-based photocatalysts, which further broadens the application of PAFs catalytic materials in photocatalytic organic synthesis.

Photochemical synthesis, characterization, and electrochemical sensing properties of CD-AuNP nanohybrids

Among the existing nanosystems used in electrochemical sensing, gold nanoparticles (AuNPs) have attracted considerable attention owing to their intriguing chemical and physical properties such as good electrical conductivity, high electrocatalytic activity, and high surface-to-volume ratio. However, despite these useful characteristics, there are some issues due to their instability in solution that can give rise to aggregation phenomena and the use of hazardous chemicals in the most common synthetic procedures. With an aim to find a solution to these issues, recently, we prepared and characterized carbon dots (CDs), from olive solid wastes, and employed them as reducing and capping agents in photo-activated AuNP synthesis, thus creating CD-Au nanohybrids. These nanomaterials appear extremely stable in aqueous solutions at room temperature, are contemporary, and have been obtained using CDs, which are exclusively based on non-toxic elements, with an additional advantage of being generated from an otherwise waste material. In this paper, the synthesis and characterization of CD-Au nanohybrids are described, and the electrochemical experiments for hydroquinone detection are discussed. The results indicate that CD-Au acts as an efficient material for sensing hydroquinone, matching a wide range of interests in science from industrial processes to environmental pollution.

Recent Advances in Photothermal Therapy at Near-Infrared-II Based on 2D MXenes

The use of photothermal therapy (PTT) with the near-infrared II region (NIR-II: 1000-1700 nm) is expected to be a powerful cancer treatment strategy. It retains the noninvasive nature and excellent temporal and spatial controllability of the traditional PTT, and offers significant advantages in terms of tissue penetration depth, background noise, and the maximum permissible exposure standards for skin. MXenes, transition-metal carbides, nitrides, and carbonitrides are emerging inorganic nanomaterials with natural biocompatibility, wide spectral absorption, and a high photothermal conversion efficiency. The PTT of MXenes in the NIR-II region not only provides a valuable reference for exploring photothermal agents that respond to NIR-II in 2D inorganic nanomaterials, but also be considered as a promising biomedical therapy. First, the synthesis methods of 2D MXenes are briefly summarized, and the laser light source, mechanism of photothermal conversion, and evaluation criteria of photothermal performance are introduced. Second, the latest progress of PTT based on 2D MXenes in NIR-II are reviewed, including titanium carbide (Ti3 C2 ), niobium carbide (Nb2 C), and molybdenum carbide (Mo2 C). Finally, the main problems in the PTT application of 2D MXenes to NIR-II and future research directions are discussed.

Effects of Oxygen Adsorption on the Optical Properties of Ag Nanoparticles

Plasmonic metal nanoparticles are efficient light harvesters with a myriad of sensing- and energy-related applications. For such applications, the optical properties of nanoparticles of metals such as Cu, Ag, and Au can be tuned by controlling the composition, particle size, and shape, but less is known about the effects of oxidation on the plasmon resonances. In this work, we elucidate the effects of O adsorption on the optical properties of Ag particles by evaluating the thermodynamic properties of O-decorated Ag particles with calculations based on the density functional theory and subsequently computing the photoabsorption spectra with a computationally efficient time-dependent density functional theory approach. We identify stable Ag nanoparticle structures with oxidized edges and a quenching of the plasmonic character of the metal particles upon oxidation and trace back this effect to the sp orbitals (or bands) of Ag particles being involved both in the plasmonic excitation and in the hybridization to form bonds with the adsorbed O atoms. Our work has important implications for the understanding and application of plasmonic metal nanoparticles and plasmon-mediated processes under oxidizing environments.

Hybrid CdSe/ZnS Quantum Dot-Gold Nanoparticle Composites Assembled by Click Chemistry: Toward Affordable and Efficient Redox Photocatalysts Working with Visible Light

A new modular, easy-to-synthesize photocatalyst was prepared by assembling colloidal CdSe/ZnS quantum dots (QD) and gold nanoparticles (AuNP) via their ligands thanks to copper-catalyzed azide to alkyne cycloaddition (CuAAC) click chemistry. The resulting composite (QD-AuNP) photocatalyst was tested with a benchmark photoredox system previously reported by our group, for which QD alone acted as a photocatalyst but with a modest quantum yield (QY = 0.06%) and turnover number (TON = 350 in 3 h) due to poor charge separation. After optimization, the QD-AuNP composites exhibited much improved photocatalytic performances: up to five times higher TON (2600 in 3 h) and up to 24 times faster reaction in the first 10 min of visible irradiation. Such an improvement is attributed to an efficient electron transfer from QD to AuNP in the photoexcited QD-AuNP composites, which ensures a much better charge separation than that in QD alone. This was confirmed by studying both (i) the quenching of the QD photoluminescence during the synthesis of the QD-AuNP composites and (ii) the blue shift of the AuNP plasmon absorption band due to the accumulation of up to 7400 electrons per AuNP in QD-AuNP composites under visible light irradiation in the presence of electron donors.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Near-Infrared Light-Induced Reversible Deactivation Radical Polymerization: Expanding Frontiers in Photopolymerization

Photoinduced reversible deactivation radical polymerization (photo-RDRP) or photoinduced controlled/living radical polymerization has emerged as a versatile and powerful technique for preparing functional and advanced polymer materials under mild conditions by harnessing light energy. While UV and visible light (λ = 400-700 nm) are extensively employed in photo-RDRP, the utilization of near-infrared (NIR) wavelengths (λ = 700-2500 nm) beyond the visible region remains relatively unexplored. NIR light possesses unique properties, including enhanced light penetration, reduced light scattering, and low biomolecule absorption, thereby providing opportunities for applying photo-RDRP in the fields of manufacturing and medicine. This comprehensive review categorizes all known NIR light-induced RDRP (NIR-RDRP) systems into four mechanism-based types: mediation by upconversion nanoparticles, mediation by photocatalysts, photothermal conversion, and two-photon absorption. The distinct photoinitiation pathways associated with each mechanism are discussed. Furthermore, this review highlights the diverse applications of NIR-RDRP reported to date, including 3D printing, polymer brush fabrication, drug delivery, nanoparticle synthesis, and hydrogel formation. By presenting these applications, the review underscores the exceptional capabilities of NIR-RDRP and offers guidance for developing high-performance and versatile photopolymerization systems. Exploiting the unique properties of NIR light unlocks new opportunities for synthesizing functional and advanced polymer materials.

Principles of Photocatalysts and Their Different Applications: A Review

Human existence and societal growth are both dependent on the availability of clean and fresh water. Photocatalysis is a type of artificial photosynthesis that uses environmentally friendly, long-lasting materials to address energy and environmental issues. There is currently a considerable demand for low-cost, high-performance wastewater treatment equipment. By changing the structure, size, and characteristics of nanomaterials, the use of nanotechnology in the field of water filtration has evolved dramatically. Semiconductor-assisted photocatalysis has recently advanced to become among the most promising techniques in the fields of sustainable energy generation and ecological cleanup. It is environmentally beneficial, cost-effective, and strictly linked to the zero waste discharge principle used in industrial effluent treatment. Owing to the reduction or removal of created unwanted byproducts, the green synthesis of photoactive nanomaterial is more beneficial than chemical synthesis approaches. Furthermore, unlike chemical synthesis methods, the green synthesis method does not require the use of expensive, dangerous, or poisonous ingredients, making it a less costly, easy, and environmental method for photocatalyst synthesis. This work focuses on distinct greener synthesis techniques utilized for the production of new photocatalysts, including metals, metal doped-metal oxides, metal oxides, and plasmonic nanostructures, including the application of artificial intelligence and machine learning to the design and selection of an innovative photocatalyst in the context of energy and environmental challenges. A brief overview of the industrial and environmental applications of photocatalysts is also presented. Finally, an overview and recommendations for future research are given to create photocatalytic systems with greatly improved stability and efficiency.

Strategic design of gold nanocatalysts for effective photocatalytic organic transformation

We demonstrate the design strategy of free-standing Au nanocatalysts by correlating their physicochemical characteristics with photocatalytic performance. By tailoring the particle size and surface characteristics, we found that small Au nanocatalysts called Au nanoclusters with discrete energy levels are more effective than large metallic Au nanoparticles, while the microenvironments (e.g., charge status and hydrophilicity/hydrophobicity) around the surface of Au-nanoclusters are crucial in determining the performance. With the optimized Au nanocatalyst, under visible light, decarboxylative radical addition reactions for C-C bond formation (i.e., Giese reaction) were first achieved with high yields and further utilized for the preparation of one of the bioactive γ-aminobutyric acid derivatives, pregabalin (Lyrica®), demonstrating its potential in pharmaceutical applications.

Using Sparfloxacin-Capped Gold Nanoparticles to Modify a Screen-Printed Carbon Electrode Sensor for Ethanol Determination

Alcohol is a dangerous substance causing global mortality and health issues, including mental health problems. Regular alcohol consumption can lead to depression, anxiety, cognitive decline, and increased risk of alcohol-related disorders. Thus, monitoring ethanol levels in biological samples could contribute to maintaining good health. Herein, we developed an electrochemical sensor for the determination of ethanol in human salivary samples. Initially, the tetra-chloroauric acid (HAuCl4) was chemically reduced using sparfloxacin (Sp) which also served as a stabilizing agent for the gold nanoparticles (AuNPs). As-prepared Sp-AuNPs were comprehensively characterized and confirmed by UV-visible spectroscopy, X-ray diffraction, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and elemental mapping analysis. The average particle size (~25 nm) and surface charge (negative) of Sp-AuNPs were determined by using dynamic light scattering (DLS) and Zeta potential measurements. An activated screen-printed carbon electrode (A-SPE) was modified using Sp-AuNPs dispersion, which exhibited greater electrocatalytic activity and sensitivity for ethanol (EtOH) oxidation in 0.1 M sodium hydroxide (NaOH) as studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). DPV showed a linear response for EtOH from 25 µM to 350 µM with the lowest limit of detection (LOD) of 0.55 µM. Reproducibility and repeatability studies revealed that the Sp-AuNPs/A-SPEs were highly stable and very sensitive to EtOH detection. Additionally, the successful electrochemical determination of EtOH in a saliva sample was carried out. The recovery rate of EtOH spiked in the saliva sample was found to be 99.6%. Thus, the incorporation of Sp-AuNPs within sensors could provide new possibilities in the development of ethanol sensors with an improved level of precision and accuracy.

Partial Chemicalization of Nanoscale Metals: An Intra-Material Transformative Approach for the Synthesis of Functional Colloidal Metal-Semiconductor Nanoheterostructures

Heterostructuring colloidal nanocrystals into multicomponent modular constructs, where domains of distinct metal and semiconductor phases are interconnected through bonding interfaces, is a consolidated approach to advanced breeds of solution-processable hybrid nanomaterials capable of expressing richly tunable and even entirely novel physical-chemical properties and functionalities. To meet the challenges posed by the wet-chemical synthesis of metal-semiconductor nanoheterostructures and to overcome some intrinsic limitations of available protocols, innovative transformative routes, based on the paradigm of partial chemicalization, have recently been devised within the framework of the standard seeded-growth scheme. These techniques involve regiospecific replacement reactions on preformed nanocrystal substrates, thus holding great synthetic potential for programmable configurational diversification. This review article illustrates achievements so far made in the elaboration of metal-semiconductor nanoheterostructures with tailored arrangements of their component modules by means of conversion pathways that leverage on spatially controlled partial chemicalization of mono- and bi-metallic seeds. The advantages and limitations of these approaches are discussed within the context of the most plausible mechanisms underlying the evolution of the nanoheterostructures in liquid media. Representative physical-chemical properties and applications of chemicalization-derived metal-semiconductor nanoheterostructures are emphasized. Finally, prospects for developments in the field are outlined.

Radiation synthesis of MXene/Ag nanoparticle hybrids for efficient photothermal conversion of polyurethane films

Flexible conductive films based on light-to-heat conversion are promising for the next-generation electronic devices. A flexible waterborne polyurethane composite film (PU/MA) with excellent photothermal conversion performance was obtained by combination of PU and silver nanoparticle decorated MXene (MX/Ag). The silver nanoparticles (AgNPs) uniformly decorated on the MXene surface by γ-ray irradiation induced reduction. Because of the synergistic effect of MXene with outstanding light-to-heat conversion efficiency and the AgNPs with plasmonic effect, the surface temperature of the PU/MA-II (0.4%) composite with lower MXene content increased from room temperature to 60.7 °C at 5 min under 85 mW cm^-2 light irradiation. Besides, the tensile strength of PU/MA-II (0.4%) increased from 20.9 MPa (pure PU) to 27.5 MPa. The flexible PU/MA composite film shows great potential in the field of thermal management of flexible wearable electronic devices.

Multifunctional CdS Nanoparticle-Decorated CeO2 as Efficient Visible Light Photocatalysts and Toxic Cr(VI) Sensors

Several one-dimensional and three-dimensional CdS@CeO₂ nanocomposites were synthesized by a solvothermal route. A nanoflower-shaped CdS@CeO₂ nanocomposite (CdS-NF@CeO₂) was selected as the model catalyst after various characterizations. It was, then, employed directly as a luminescent sensor for Cr(VI) detection in an aqueous medium. A good linear quenching was observed in the range of 0-0.5 μM with a detection limit of 0.04 μM. The quantum yield of the catalyst was found to be 73%. Moreover, our catalyst is highly selective toward Cr(VI) and can be applied as an efficient sensor for real water analysis. The efficiency of the catalyst was also tested in controlling the photocatalytic activity for oxidation of benzylamine to N-benzylidenebenzylamine under a domestic LED bulb with molecular O₂ as a sole, green oxidant. Conversion (>99.9%) and selectivity as high as 100% were observed for the CdS-NF@CeO₂ photocatalyst. These results show the potential applications of CdS-NF@CeO₂ nanocomposites as an efficient photocatalyst for organic transformation and environmental remediation.

Deciphering the Superior Electronic Transmission Induced by the Li-N Ligand Pairs Boosted Photocatalytic Hydrogen Evolution

Atomic level decoration route is designated as one of the attractive methods to regulate both the charge density and band structure of photocatalysts. Moreover, to enable more efficient separation and transport of photocarriers, the construction of novel active sites can enhance both the reactivity and electrical conductivity of the crystal. Herein, an Li-N ligand is constructed via co-doping lithium and nitrogen atoms into ZnIn₂ S₄ lattice, which achieves a promoted photocatalytic H₂ evolution at 9737 µmol g^-1 h^-1 . The existence of Li-N ligand pairs and the behaviors of photocarriers on L₄₀ N₅ ZIS are determined systematically, which also provides a unique insight into the mechanism of the improved photocarrier migration rate. With the introduction of Li-N dual sites, the vacancy form of ZnIn₂ S₄ has changed and the photocatalytic stability is significantly improved. Interestingly, the change of charge density around Li-N ligand in ZnIn₂ S₄ is determined by theoretical simulations, as well as the regulated energy barrier of photocatalytic water splitting caused by Li-N dual sites, which act as both adsorption site for H₂ O and stronger reactive sites. This work helps to extend the understanding of ZnIn₂ S₄ and offers a fresh perspective for the creation of a Li-N co-doped photocatalyst.

Ostensible Steady-State Molecular Cooling with Plasmonic Gold Nanoparticles

The optical and chemical properties of plasmonic materials have sparked extensive research in exploring their applications in various areas such as photocatalysts, chemical sensors, and photonic devices. However, complicated plasmon-molecule interactions have posed substantial obstacles for the development of plasmonic material-based technologies. Quantifying plasmon-molecule energy transfer processes is a crucial step to understand the complex interplay between plasmonic materials and molecules. Here we report an anomalous steady-state reduction in the anti-Stokes to Stokes surface-enhanced Raman spectroscopy (SERS) scattering intensity ratio of aromatic thiols adsorbed on plasmonic gold nanoparticles under continuous-wave laser irradiation. The observed reduction of the scattering intensity ratio is closely related to the excitation wavelength, the surrounding media, and component of the plasmonic substrates used. Moreover, we observed a similar extent of scattering intensity ratio reduction with a range of aromatic thiols and under different external temperatures. Our discovery implies that there are either unexplained wavelength-dependent SERS outcoupling effects, or some unrecognized plasmon-molecule interactions which lead to a nanoscale plasmon refrigerator for molecules. This effect should be taken into consideration for the design of plasmonic catalysts and plasmonic photonic devices. Moreover, it could be useful for cooling large molecules under ambient conditions.

Noble Metal Nanoparticle-Loaded Porphyrin Hexagonal Submicrowires Composites (M-HW): Photocatalytic Synthesis and Enhanced Photocatalytic Activity

Surface plasmon resonance (SPR) photocatalysts have attracted considerable attention because of their strong absorption capacity of visible light and enhanced photogenic carrier separation efficiency. However, the separate production of metal nanoparticles (NPs) and semiconductors limits the photogenic charge transfer. As one of the most promising organic photocatalysts, porphyrin self-assemblies with a long-range ordered structure-enhance electron transfer. In this study, plasmonic noble metal-based porphyrin hexagonal submicrowires composites (M-HW) loaded with platinum (Pt), silver (Ag), gold (Au), and palladium (Pd) NPs were synthesized through a simple in situ photocatalytic method. Homogeneous and uniformly distributed metal particles on the M-HW composites enhanced the catalytic or chemical properties of the organic functional nanostructures. Under the same loading of metal NPs, the methyl orange photocatalytic degradation efficiency of Ag-HW [k_Ag-HW (0.043 min^-1)] composite was three times higher than that of HW, followed by Pt-HW [k_Pt-HW (0.0417 min^-1)], Au-HW [k_Au-HW (0.0312 min^-1)], and Pd-HW [k_Pd-HW (0.0198 min^-1)]. However, the rhodamine B (RhB) and eosin B photocatalytic degradations of Pt-HW were 4 times and 2.6 times those of HW, respectively. Finally, the SPR-induced electron injection, trapping, and recombination processes of the M-HW system were investigated. These results showed that M-HW plasmonic photocatalysts exhibited excellent photocatalytic performances, making them promising materials for photodegrading organic pollutants.

Plasmonic Silver-Nanoparticle-Catalysed Hydrogen Abstraction from the C(sp3 )-H Bond of the Benzylic Cα atom for Cleavage of Alkyl Aryl Ether Bonds

Selective activation of the C(sp³ )-H bond is an important process in organic synthesis, where efficiently activating a specific C(sp³ )-H bond without causing side reactions remains one of chemistry's great challenges. Here we report that illuminated plasmonic silver metal nanoparticles (NPs) can abstract hydrogen from the C(sp³ )-H bond of the C_α atom of an alkyl aryl ether β-O-4 linkage. The intense electromagnetic near-field generated at the illuminated plasmonic NPs promotes chemisorption of the β-O-4 compound and the transfer of photo-generated hot electrons from the NPs to the adsorbed molecules leads to hydrogen abstraction and direct cleavage of the unreactive ether C_β -O bond under moderate reaction conditions (≈90 °C). The plasmon-driven process has certain exceptional features: enabling hydrogen abstraction from a specific C(sp³ )-H bond, along with precise scission of the targeted C-O bond to form aromatic compounds containing unsaturated, substituted groups in excellent yields.

Ultra-Low-Power E-Nose System Based on Multi-Micro-LED-Integrated, Nanostructured Gas Sensors and Deep Learning

As interests in air quality monitoring related to environmental pollution and industrial safety increase, demands for gas sensors are rapidly increasing. Among various gas sensor types, the semiconductor metal oxide (SMO)-type sensor has advantages of high sensitivity, low cost, mass production, and small size but suffers from poor selectivity. To solve this problem, electronic nose (e-nose) systems using a gas sensor array and pattern recognition are widely used. However, as the number of sensors in the e-nose system increases, total power consumption also increases. In this study, an ultra-low-power e-nose system was developed using ultraviolet (UV) micro-LED (μLED) gas sensors and a convolutional neural network (CNN). A monolithic photoactivated gas sensor was developed by depositing a nanocolumnar In₂O₃ film coated with plasmonic metal nanoparticles (NPs) directly on the μLED. The e-nose system consists of two different μLED sensors with silver and gold NP coating, and the total power consumption was measured as 0.38 mW, which is one-hundredth of the conventional heater-based e-nose system. Responses to various target gases measured by multi-μLED gas sensors were analyzed by pattern recognition and used as the training data for the CNN algorithm. As a result, a real-time, highly selective e-nose system with a gas classification accuracy of 99.32% and a gas concentration regression error (mean absolute) of 13.82% for five different gases (air, ethanol, NO₂, acetone, methanol) was developed. The μLED-based e-nose system can be stably battery-driven for a long period and is expected to be widely used in environmental internet of things (IoT) applications.

Ligand-assisted morphology regulation of AuNi bimetallic nanocrystals for efficient hydrogen evolution

We report the controllable synthesis of AuNi core-shell (c-AuNi) and Janus (j-AuNi) nanocrystals (NCs) with uniform shape, tunable size and compositions in the presence of trioctylphosphine (TOP) or triphenylphosphine (TPP). The morphology of the AuNi bimetallic NCs could be regulated by varying the structure and concentration of phosphine ligands. The ligand-directed structural evolution mechanism of AuNi bimetallic NCs was investigated and discussed in detail. When loaded on graphitic carbon nitride (GCN) for photocatalytic hydrogen generation, the obtained j-AuNi NCs showed much higher activity for hydrogen evolution than the monometallic (Au and Ni) counterparts, owing to the synergistic effect of plasmon enhanced light absorption from the Au portion and additional electron sink effect from the Ni portion. This work provides a promising route for preparing low-cost Au-based bimetallic catalysts with controllable morphologies and high activities for hydrogen production.

Multifunctional 3D-printed bioceramic scaffolds: Recent strategies for osteosarcoma treatment

Osteosarcoma is the most prevalent bone malignant tumor in children and teenagers. The bone defect, recurrence, and metastasis after surgery severely affect the life quality of patients. Clinically, bone grafts are implanted. Primary bioceramic scaffolds show a monomodal osteogenesis function. With the advances in three-dimensional printing technology and materials science, while maintaining the osteogenesis ability, scaffolds become more patient-specific and obtain additional anti-tumor ability with functional agents being loaded. Anti-tumor therapies include photothermal, magnetothermal, old and novel chemo-, gas, and photodynamic therapy. These strategies kill tumors through novel mechanisms to treat refractory osteosarcoma due to drug resistance, and some have shown the potential to reverse drug resistance and inhibit metastasis. Therefore, multifunctional three-dimensional printed bioceramic scaffolds hold excellent promise for osteosarcoma treatments. To better understand, we review the background of osteosarcoma, primary 3D-printed bioceramic scaffolds, and different therapies and have a prospect for the future.

Rational Design of a Core-Shell Structured Plasmonic Au@MIL-100(Fe) Nanocomposite for Efficient Photocatalysis

The utilization of solar light to trigger organic syntheses for the production of value-added chemicals has attracted increasing recent research attention. The integration of plasmonic Au NPs (NPs = nanoparticles) with MOFs would provide a new way for the development of highly efficient photocatalytic systems. In this manuscript, a bottle-around-ship strategy was adopted for the successful synthesis of a core-shell structured Au_pvp@MIL-100(Fe) (PVP = polyvinylpyrrolidone) nanocomposite in room temperature. The as-obtained core-shell structured Au_pvp@MIL-100(Fe) show improved photocatalytic performance for benzyl alcohol oxidation under visible light, because of the migration of the surface plasmon resonance (SPR) excited hot electrons from plasmonic Au NPs to MIL-100(Fe), resulting in the production of more active O₂^•- radicals. The removal of the capping agent PVP from Au_pvp@MIL-100(Fe) significantly enhanced the photocatalytic performance, because of an improved charge transfer from plasmonic Au NPs to MIL-100(Fe). This study demonstrates an efficient strategy of fabricating superior photocatalytic systems by a rational coupling of plasmonic Au NPs and photocatalytic active MOFs into a core-shell structured nanocomposite.

Ultrabroad spectral response and excellent SERS performance of PbS-assisted Au/PbS/Au nanostars

Noble metal nanomaterials have many excellent optical properties due to localized surface plasmon resonance induced by external electric and magnetic fields. The plasmon-enhanced optical properties of nanomaterials can be controlled by changing their shapes or compositions. Here, we use a gentle approach to synthesize Au/PbS/Au nanostars with multiple tips and explore the surface-enhanced Raman scattering (SERS) activity, the second harmonic generation (SHG), and photocatalytic performance. The Au/PbS/Au nanostars have ultrabroad spectral responses and significantly enhanced local electric fields near the sharp tips. The size and tip length of the Au/PbS/Au nanostars can be adjusted by changing the amount of HAuCl₄. The Au/PbS/Au nanostars exhibit largely enhanced SERS activity and photocatalytic degradation efficiency compared with the Au bipyramids and the Au BPs@PbS nanocrystals. In addition, the SHG of Au/PbS/Au nanostars is also significantly enhanced due to asymmetry and local field enhancement. This research shows potential in many applications ranging from photophysics to photochemistry.

Plasmonic Nanozymes: Leveraging Localized Surface Plasmon Resonance to Boost the Enzyme-Mimicking Activity of Nanomaterials

Nanozymes, a type of nanomaterials that function similarly to natural enzymes, receive extensive attention in biomedical fields. However, the widespread applications of nanozymes are greatly plagued by their unsatisfactory enzyme-mimicking activity. Localized surface plasmon resonance (LSPR), a nanoscale physical phenomenon described as the collective oscillation of surface free electrons in plasmonic nanoparticles under light irradiation, offers a robust universal paradigm to boost the catalytic performance of nanozymes. Plasmonic nanozymes (PNzymes) with elevated enzyme-mimicking activity by leveraging LSPR, emerge and provide unprecedented opportunities for biocatalysis. In this review, the physical mechanisms behind PNzymes are thoroughly revealed including near-field enhancement, hot carriers, and the photothermal effect. The rational design and applications of PNzymes in biosensing, cancer therapy, and bacterial infections elimination are systematically introduced. Current challenges and further perspectives of PNzymes are also summarized and discussed to stimulate their clinical translation. It is hoped that this review can attract more researchers to further advance the promising field of PNzymes and open up a new avenue for optimizing the enzyme-mimicking activity of nanozymes to create superior nanocatalysts for biomedical applications.

Size Effect in Hybrid TiO2:Au Nanostars for Photocatalytic Water Remediation Applications

TiO₂:Au-based photocatalysis represents a promising alternative to remove contaminants of emerging concern (CECs) from wastewater under sunlight irradiation. However, spherical Au nanoparticles, generally used to sensitize TiO₂, still limit the photocatalytic spectral band to the 520 nm region, neglecting a high part of sun radiation. Here, a ligand-free synthesis of TiO₂:Au nanostars is reported, substantially expanding the light absorption spectral region. TiO₂:Au nanostars with different Au component sizes and branching were generated and tested in the degradation of the antibiotic ciprofloxacin. Interestingly, nanoparticles with the smallest branching showed the highest photocatalytic degradation, 83% and 89% under UV and visible radiation, together with a threshold in photocatalytic activity in the red region. The applicability of these multicomponent nanoparticles was further explored with their incorporation into a porous matrix based on PVDF-HFP to open the way for a reusable energy cost-effective system in the photodegradation of polluted waters containing CECs.

Flexible stretchable electrothermally/photothermally dual-driven heaters from nano-embedded hierarchical CuxS-Coated PET fabrics for all-weather wearable thermal management

The multifunctional photoelectronic devices are recently attracting much more attention due to their potential enlarged applications. The flexible stretchable electrothermally/photothermally dual-driven heaters for all-weather wearable thermal management are presented in this work with nano-embedded hierarchical Cu_xS-coated PET fabrics. Herein, the hierarchical nano-embedded Cu_xS film is fabricated via a simple chemical bath method for high electrical conductivity and highly efficient inelastic collision of electro/photo-generated carriers. The hierarchical nano-embedded Cu_xS morphology produces the low sheet resistance of 1.26 Ω sq^-1 and the super low total heat transfer coefficient of 3.256 × 10^-5 W/^oC·mm², which lead to the high-efficient electro/photo-dual-driven heating effect in the Cu_xS@PET fabrics. The saturated temperature on the as-fabricated flexible wearable heaters reaches up to 172 °C. The thermal conversion devices also bear the excellent stability, reproducibility, stretchability, controllability and corrosion-resistant characteristics. Interestingly, their excellent thermal conversion performance could be achieved by freely exchanging the driving power sources, such as electricity-supplying equipment, 635-nm laser, infrared physiotherapy lamp and solar simulator, which provides a necessary precondition for the all-weather applications of flexible wearable heaters. The as-fabricated electro/photo-dual-driven heaters on the Cu_xS@PET fabrics have the promising applications in wearable electronics, all-weather self-heating facilities, out/in-vivo physiotherapy, and so on.

Recent Developments in Heterogeneous Photocatalysts with Near-Infrared Response

Photocatalytic technology has been considered as an efficient protocol to drive chemical reactions in a sustainable and green way. With the assistance of semiconductor-based materials, heterogeneous photocatalysis converts solar energy directly into chemical energy that can be readily stored. It has been employed in several fields including CO2 reduction, H2O splitting, and organic synthesis. Given that near-infrared (NIR) light occupies 47% of sunlight, photocatalytic systems with a NIR response are gaining more and more attention. To enhance the solar-to-chemical conversion efficiency, precise regulation of the symmetric/asymmetric nanostructures and band structures of NIR-response photocatalysts is indispensable. Under the irradiation of NIR light, the symmetric nano-morphologies (e.g., rod-like core-shell shape), asymmetric electronic structures (e.g., defect levels in band gap) and asymmetric heterojunctions (e.g., PN junctions, semiconductor-metal or semiconductor-dye composites) of designed photocatalytic systems play key roles in promoting the light absorption, the separation of electron/hole pairs, the transport of charge carriers to the surface, or the rate of surface photocatalytic reactions. This review will comprehensively analyze the four main synthesis protocols for the fabrication of NIR-response photocatalysts with improved reaction performance. The design methods involve bandgap engineering for the direct utilization of NIR photoenergy, the up-conversion of NIR light into ultraviolet/visible light, and the photothermal effect by converting NIR photons into local heat. Additionally, challenges and perspectives for the further development of heterogeneous photocatalysts with NIR response are also discussed based on their potential applications.

Combination of Plasmon-Mediated Photochemistry and Seed-Mediated Methods for Synthesis of Bicomponent Nanocrystals

Plasmon resonances of metal nanocrystals resulted from free electrons oscillating around nanocrystals, leading to a strong electromagnetic field around them. Because these oscillating electrons possess higher energy than the original ones, also known as hot electrons, these were widely used as photocatalysts for various reactions. Also, the strength and distribution of the electromagnetic field around the nanocrystals strongly depended on their morphology and excited irradiation, which led to the reaction environment around nanocrystals being controllable. Here, we integrated the seed-mediated and plasmon-mediated photochemistry methods for fabricating bimetallic and semiconductor-metal nanocrystals with controllable morphologies and compositions of the nanocrystals, resulting from the highly anisotropic reaction environment around the nanocrystals. The highly anisotropic reaction environment around the template nanocrystal was caused by the distribution of electromagnetic fields around it and its exposure area in the reaction solution. This new synthesis method should enable the fabrication of various multicomponent nanocrystals with desirable functions for potential applications, such as photocatalysts, chemical sensors, biosensors, biomedicines, etc.

Plasmonic Effect of Ag/Au Composite Structures on the Material Transition

Noble metal nanostructures can produce the surface plasmon resonance under appropriate photoexcitation, which can be used to promote or facilitate chemical reactions, as well as photocatalytic materials, due to their strong plasmon resonance in the visible light region. In the current work, Ag/Au nanoislands (NIs) and Ag NIs/Au film composite systems were designed, and their thermocatalysis performance was investigated using luminescence of Eu³⁺ as a probe. Compared with Ag NIs, the catalytic efficiency and stability of surface plasmons of Ag/Au NIs and Ag NIs/Au film composite systems were greatly improved. It was found that the metal NIs can also generate strong localized heat at low temperature environment, enabling the transition of NaYF₄:Eu³⁺ to Y₂O₃: Eu³⁺, and anti-oxidation was realized by depositing gold on the surface of silver, resulting in the relative stability of the constructed complex.

Charge carrier dynamics and reaction intermediates in heterogeneous photocatalysis by time-resolved spectroscopies

Sunlight as the most abundant renewable energy holds the promise to make our society sustainable. However, due to its low power density and intermittence, efficient conversion and storage of solar energy as a clean fuel are crucial. Apart from solar fuel synthesis, sunlight can also be used to drive other reactions including organic conversion and air/water purification. Given such potential of photocatalysis, the past few decades have seen a surge in the discovery of photocatalysts. However, the current photocatalytic efficiency is still very moderate. To address this challenge, it is important to understand fundamental factors that dominate the efficiency of a photocatalytic process to enable the rational design and development of photocatalytic systems. Many recent studies highlighted transient absorption spectroscopy (TAS) and time-resolved infrared (TRIR) spectroscopy as powerful approaches to characterise charge carrier dynamics and reaction pathways to elucidate the reasons behind low photocatalytic efficiencies, and to rationalise photocatalytic activities exhibited by closely related materials. Accordingly, as a fast-moving area, the past decade has witnessed an explosion in reports on charge carrier dynamics and reaction mechanisms on a wide range of photocatalytic materials. This critical review will discuss the application of TAS and TRIR in a wide range of heterogeneous photocatalytic systems, demonstrating the variety of ways in which these techniques can be used to understand the correlation between materials design, charge carrier behaviour, and photocatalytic activity. Finally, it provides a comprehensive outlook for potential developments in the area of time-resolved spectroscopies with an aim to provide design strategies for photocatalysts.

Anisotropic Plasmonic Gold Nanorod-Indocyanine Green@Reduced Graphene Oxide-Doxorubicin Nanohybrids for Image-Guided Enhanced Tumor Theranostics

The unique physicochemical and localized surface plasmon resonance assets of gold nanorods (GNRs) have offered combined cancer treatments with real-time diagnosis by integrating diverse theragnostic modalities into a single nanoplatform. In this work, a unique multifunctional nanohybrid material based on GNRs was designed for in vitro and in vivo tumor imaging along with synergistic and combinatorial therapy of tumor. The hybrid material with size less than 100 nm was achieved by embedding indocyanine green (ICG) on mesoporous silica-coated GNRs with further wrapping of reduced graphene oxide (rGO) and then attached with doxorubicin (DOX) and polyethylene glycol. The nanohybrid unveiled noteworthy stability and competently protected the embedded ICG from further aggregation, photobleaching, and nucleophilic attack by encapsulation of GNRs-ICG with rGO. Such combination of GNRs-ICG with rGO and DOX served as a real-time near-infrared (NIR) contrast imaging agent for cancer diagnosis. The hybrid material exhibits high NIR absorption property along with three destined capabilities, such as, nanozymatic activity, photothermal activity, and an excellent drug carrier for drug delivery. The integrated properties of the nanohybrid were then utilized for the triple mode of combined therapeutics of tumor cells, through synergistic catalytic therapy and chemotherapy with combinatorial photothermal therapy to achieve the maximum cancer killing efficiency. It is assumed that the assimilated multimodal imaging and therapeutic capability in single nanoparticle platform is advantageous for future practical applications in cancer diagnosis, therapy, and molecular imaging.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Preparation and Photocatalytic Characterization of Modified Nano TiO2/Nd/Rice Husk Ash Material for Rifampicin Removal in Aqueous Solution

Antibiotics like rifampicin are often persistent in the environment. When entering the water, it causes antimicrobial resistance that affects the ecosystem and accumulates in the aquatic organisms and affects human health through the food chain. In this study, titanium dioxide was doped with neodymium (0.01 to 0.8%) using the sol-gel hydrothermal method. TiO₂/Nd was then coated on rice husk ash to produce a modified TiO₂/Nd/rice husk ash material containing 0.36% (w/w) Nd. The structural characteristics and photocatalytic properties of the materials were analyzed by X-ray diffraction, energy dispersive X-ray, transmission electron microscopy, scanning electron microscopy, forbidden zone energy, and specific surface area. The TiO₂/Nd material exhibited a higher photocatalytic decomposition capacity than TiO₂ and depended on the Nd content. The rifampicin removal efficiency of TiO₂/Nd materials with 0.36 to 0.80% Nd contents was approximately 40% higher than that of TiO₂/Nd containing 0.01 to 0.28% Nd. A new photocatalytic TiO₂/Nd/rice husk ash material was developed to decompose rifampicin. The rifampicin-degrading efficiency of TiO₂/Nd and TiO₂/Nd/rice husk ash material reached approximately 86 and 75%, respectively, within 90 min under sunlight. Although a lower efficiency was obtained, the TiO₂/Nd/rice husk ash material was selected to degrade rifampicin residue in water via the photocatalytic process (under sunlight) because of its advantages such as requirement of a small amount and easy recovery. In the rifampicin removal process, k values were found to match the zero- and first-order kinetics. In particular, for TiO₂/Nd and TiO₂/Nd/rice husk ash under solar irradiation, R ² values reached approximately 0.98. These results have been previously published as a preprint.

Photocatalytic Recovery of Gold from a Non-Cyanide Gold Plating Solution as Au Nanoparticle-Decorated Semiconductors

In this work, a photocatalytic process was carried out to recover gold (Au) from the simulated non-cyanide plating bath solution. Effects of semiconductor types (TiO₂, WO₃, Nb₂O₃, CeO₂, and Bi₂O₃), initial pH of the solution (3-10), and type of complexing agents (Na₂S₂O₃ and Na₂SO₃) and their concentrations (1-4 mM each) on Au recovery were explored. Among all employed semiconductors, TiO₂ exhibited the highest photocatalytic activity to recover Au from the simulated spent plating bath solution both in the absence and presence of complexing agents, in which Au was completely recovered within 15 min at a pH of 6.5. The presence of complexing agents remarkably affected the size of deposited Au on the TiO₂ surface, the localized surface plasmon effect (LSPR) behavior, and the valence band (VB) edge position of the obtained Au/TiO₂, without a significant change in the textural properties or the band gap energy. The photocatalytic activity of the obtained Au/TiO₂ tested via two photocatalytic processes depended on the common reduction mechanism rather than the textural or optical properties. As a result, the Au/TiO₂ NPs obtained from the proposed recovery process are recommended for use as a photocatalyst for the reactions occurring at the conduction band rather than at the valence band. Notably, they exhibited good stability after the fifth photocatalytic cycle for Au recovery from the actual cyanide plating bath solution.

Rational design for gold nanoparticle-based plasmonic catalysts and electrodes for water oxidation towards artificial photosynthesis

The oxygen evolution reaction (OER) with a large overpotential is the key step common to artificial photosynthesis. In semiconductor photocatalysts, the light available to the reactions is usually limited to UV or visible with wavelengths shorter than the absorption edge of the semiconductors. On the other hand, gold nanoparticle (Au NP)-based plasmonic photocatalysts, particularly hot-electron transfer (HET)-type plasmonic photocatalysts, have the capability to utilize visible-to-near infrared light that makes up most sunlight as a driving force for the energetically uphill reactions. In recent years, experimental and theoretical studies on HET-type plasmonic photocatalysts consisting of Au NPs and a semiconductor have been intensively pursued. This perspective article highlights the fundamentals and recent progress of Au NP-based HET-type plasmonic photocatalysts for OER. After the introduction, the basics for the rational design of plasmonic photocatalysts are treated first. Secondly, the concrete design for the plasmonic photocatalysts is dealt with in the order of semiconductors, Au NPs, and their interface. Thirdly, recent advanced studies on plasmonic photocatalysts for OER are described. Finally, the conclusions are summarized with a direction for future research on plasmonic photocatalysts.

In Situ Investigation of Ultrafast Dynamics of Hot Electron-Driven Photocatalysis in Plasmon-Resonant Grating Structures

Understanding the relaxation and injection dynamics of hot electrons is crucial to utilizing them in photocatalytic applications. While most studies have focused on hot carrier dynamics at metal/semiconductor interfaces, we study the in situ dynamics of direct hot electron injection from metal to adsorbates. Here, we report a hot electron-driven hydrogen evolution reaction (HER) by exciting the localized surface plasmon resonance (LSPR) in Au grating photoelectrodes. In situ ultrafast transient absorption (TA) measurements show a depletion peak resulting from hot electrons. When the sample is immersed in solution under -1 V applied potential, the extracted electron-phonon interaction time decreases from 0.94 to 0.67 ps because of additional energy dissipation channels. The LSPR TA signal is redshifted with delay time because of charge transfer and subsequent change in the dielectric constant of nearby solution. Plateau-like photocurrent peaks appear when exciting a 266 nm linewidth grating with p-polarized (on resonance) light, accompanied by a similar profile in the measured absorptance. Double peaks in the photocurrent measurement are observed when irradiating a 300 nm linewidth grating. The enhancement factor (i.e., reaction rate) is 15.6× between p-polarized and s-polarized light for the 300 nm linewidth grating and 4.4× for the 266 nm linewidth grating. Finite-difference time domain (FDTD) simulations show two resonant modes for both grating structures, corresponding to dipolar LSPR modes at the metal/fused silica and metal/water interfaces. To our knowledge, this is the first work in which LSPR-induced hot electron-driven photochemistry and in situ photoexcited carrier dynamics are studied on the same plasmon resonance structure with and without adsorbates.

All-State Switching of the Mie Resonance of Conductive Polyaniline Nanospheres

Polyaniline (PANI), a conductive polymer, is a promising active material for optical switching. In most studies, active switching has so far been realized only between two states, whereas PANI has a total of six states. The optical properties of nanoscale PANI in all six states have remained unclear. Herein we report on all-state switching of the Mie resonance on PANI nanospheres (NSs) and active plasmon switching on PANI-coated Au nanodisks (NDs). All-state switching of differently sized PANI NSs is achieved by proton doping/dedoping and electrochemical methods. Theoretical studies show that the scattering peaks of the individual PANI NSs originate from Mie resonances. All-state switching is further demonstrated on PANI-coated circular Au NDs, where an unprecedentedly large plasmon peak shift of ∼200 nm is realized. Our study not only provides a fundamental understanding of the optical properties of PANI but also opens the probability for developing high-performance dynamic media for active plasmonics.

Octahedral Pt-MOF with Au deposition for plasmonic effect and Schottky junction enhanced hydrogenothermal therapy of rheumatoid arthritis

Hydrogen (H₂) therapy is a novel and rapidly developing strategy utilized to treat inflammatory diseases. However, the therapeutic efficacy of H₂ is largely limited with on-target off-synovium toxic effect, nonpolarity and low solubility. Herein, an intelligent H₂ nanogenerator based upon the metal-organic framework (MOF) loaded with polydopamine and Perovskite quantum dots is constructed for the actualization of hydrogenothermal therapy. The biodegradable polydopamine with excellent photothermal conversion efficiencies is used for photothermal therapy (PTT) of rheumatoid arthritis (RA) and perovskite quantum dots (QDs) with unique photophysical properties are used as fluorescent signals for positioning Pt-MOF@Au@QDs/PDA nanoparticles. In addition, the Pt-MOF@Au@QDs/PDA catalyzer combines Au's surface plasmon resonance excitation with Pt-MOF Schottky junction, and exhibits extremely efficient photocatalytic H₂ production under visible light irradiation. The Pt-MOF@Au@QDs/PDA achieves the aggregation of rheumatoid synovial cells by the extravasation through “ELVIS” effect (extravasation through leaky vasculature and subsequent inflammatory cell-mediated sequestration) and extremely efficient photocatalytic H₂ production. By combining PTT and H₂ therapy, the Pt-MOF@Au@QDs/PDA relieves the oxidative stress of RA, and shows significant improvement in joint damage and inhibition of the overall arthritis severity of collagen-induced RA mouse models. Therefore, the Pt-MOF@Au@QDs/PDA shows great potential in the treatment of RA and further clinical transformation.