Artificial photosynthesis over graphene-semiconductor composites. Are we getting better?

2D graphene-based advanced nanoarchitectonics for electrochemical biosensors: Applications in cancer biomarker detection

Low-cost, rapid, and easy-to-use biosensors for various cancer biomarkers are of utmost importance in detecting cancer biomarkers for early-stage metastasis control and efficient diagnosis. The molecular complexity of cancer biomarkers is overwhelming, thus, the repeatability and reproducibility of measurements by biosensors are critical factors. Electrochemical biosensors are attractive alternatives in cancer diagnosis due to their low cost, simple operation, and promising analytical figures of merit. Recently graphene-derived nanostructures have been used extensively for the fabrication of electrochemical biosensors because of their unique physicochemical properties, including the high electrical conductivity, adsorption capacity, low cost and ease of mass production, presence of oxygen-containing functional groups that facilitate the bioreceptor immobilization, increased flexibility and mechanical strength, low cellular toxicity. Indeed, these properties make them advantageous compared to other alternatives. However, some drawbacks must be overcome to extend their use, such as poor and uncontrollable deposition on the substrate due to the low dispersity of some graphene materials and irreproducibility of the results because of the differences in various batches of the produced graphene materials. This review has documented the most recently developed strategies for electrochemical sensor fabrication. It differs in the categorization method compared to published works to draw greater attention to the wide opportunities of graphene nanomaterials for biological applications. Limitations and future scopes are discussed to advance the integration of novel technologies such as artificial intelligence, the internet of medical things, and triboelectric nanogenerators to eventually increase efficacy and efficiency.

Silicon Radical-Induced CH4 Dissociation for Uniform Graphene Coating on Silica Surface

Due to the manufacturability of highly well-defined structures and wide-range versatility in its microstructure, SiO2 is an attractive template for synthesizing graphene frameworks with the desired pore structure. However, its intrinsic inertness constrains the graphene formation via methane chemical vapor deposition. This work overcomes this challenge by successfully achieving uniform graphene coating on a trimethylsilyl-modified SiO2 (denote TMS-MPS). Remarkably, the onset temperature for graphene growth dropped to 720 °C for the TMS-MPS, as compared to the 885 °C of the pristine SiO2. This is found to be mainly from the Si radicals formed from the decomposition of the surface TMS groups. Both experimental and computational results suggest a strong catalytic effect of the Si radicals on the CH4 dissociation. The surface engineering of SiO2 templates facilitates the synthesis of high-quality graphene sheets. As a result, the graphene-coated SiO2 composite exhibits a high electrical conductivity of 0.25 S cm-1. Moreover, the removal of the TMP-MPS template has released a graphene framework that replicates the parental TMS-MPS template on both micro- and nano- scales. This study provides tremendous insights into graphene growth chemistries as well as establishes a promising methodology for synthesizing graphene-based materials with pre-designed microstructures and porosity.

Recent Developments and Perspectives of Cobalt Sulfide-Based Composite Materials in Photocatalysis

Photocatalysis, as an inexpensive and safe technology to convert solar energy, is essential for the efficient utilization of sustainable renewable energy sources. Earth-abundant cobalt sulfide-based composites have generated great interest in the field of solar fuel conversion because of their cheap, diverse structures and facile preparation. Over the past 10 years, the number of reports on cobalt sulfide-based photocatalysts has increased year by year, and more than 500 publications on the application of cobalt sulfide groups in photocatalysis can be found in the last three years. In this review, we initially summarize the four common strategies for preparing cobalt sulfide-based composite materials. Then, the multiple roles of cobalt sulfide-based cocatalysts in photocatalysis have been discussed. After that, we present the latest progress of cobalt sulfide in four fields of photocatalysis application, including photocatalytic hydrogen production, carbon dioxide reduction, nitrogen fixation, and photocatalytic degradation of pollutants. Finally, the development prospects and challenges of cobalt sulfide-based photocatalysts are discussed. This review is expected to provide useful reference for the construction of high-performance cobalt sulfide-based composite photocatalytic materials for sustainable solar-chemical energy conversion.

Highly efficient photodegradation of magnetic GO-Fe3O4@SiO2@CdS for phenanthrene and pyrene: Mechanism insight and application assessment

A novel magnetic core-shell Fe₃O₄@SiO₂@CdS embedded graphene oxide (GO) composite was prepared for the visible-light-driven photodegradation of high ring number polycyclic aromatic hydrocarbons (PAHs). The potential application of GO-Fe₃O₄@SiO₂@CdS was evaluated through the photodegradation of phenanthrene and pyrene in deionized water, tap water, and lake water, respectively. It was found that GO-Fe₃O₄@SiO₂@CdS could remove 86.4 % of phenanthrene and 93.4 % of pyrene, suggesting its potential for the degradation of high-ring number PAHs. The density functional theory (DFT) calculations demonstrate that pyrene has more active sites attacked by free radicals. The photoelectrochemical measurement and quenching experiments indicate that GO can transfer photoelectrons efficiently, resulting in the crucial radicals (O₂^-, OH and ¹O₂). More importantly, the photocatalytic activity kept almost constant during five cycles, confirming the significant anti-photocorrosion of GO-Fe₃O₄@SiO₂@CdS. This work provides some new insights into the removal of PAHs with high-ring numbers in the natural water environment.

Nano-antivirals: A comprehensive review

Nanoparticles can be used as inhibitory agents against various microorganisms, including bacteria, algae, archaea, fungi, and a huge class of viruses. The mechanism of action includes inhibiting the function of the cell membrane/stopping the synthesis of the cell membrane, disturbing the transduction of energy, producing toxic reactive oxygen species (ROS), and inhibiting or reducing RNA and DNA production. Various nanomaterials, including different metallic, silicon, and carbon-based nanomaterials and nanoarchitectures, have been successfully used against different viruses. Recent research strongly agrees that these nanoarchitecture-based virucidal materials (nano-antivirals) have shown activity in the solid state. Therefore, they are very useful in the development of several products, such as fabric and high-touch surfaces. This review thoroughly and critically identifies recently developed nano-antivirals and their products, nano-antiviral deposition methods on various substrates, and possible mechanisms of action. By considering the commercial viability of nano-antivirals, recommendations are made to develop scalable and sustainable nano-antiviral products with contact-killing properties.

Economic and facile approach for synthesis of graphene-titanate nanocomposite for water reclamation

Graphene and its composites with semiconductor materials have been received highly attention in many research areas because of their unique properties. Efficient application of graphene is hindered by the lack of cost-effective synthesis methods. In this work, an economic and facile route for mass production of graphene-titanate nanocomposite has been discussed. Graphene was prepared by exfoliation of graphite powder in 40% ethanol aqueous solution. Titanate nanotubes were grown on graphene sheets by hydrothermal method, where the dispersed graphene sheets were mixed with titanate solution and then placed in autoclave and placed in oven for 16 h at 160 °C. The prepared composite was characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), thermogravimetric analysis (TGA). All the obtained results confirmed the synthesis of graphene and its composite with titanate in highly uniform and pure form. The adsorption efficiency of the prepared composite was tested using methylene blue (MB) as a model dye. The adsorption isotherm was investigated using Freundlich and Langmuir models. The adsorption capacity of MB was 270.27 mg/g. The obtained correlation coefficients (R²) by Freundlich and Langmuir model were 0.996 and 0.973, respectively. The adsorption kinetics was investigated and discussed using different models. The thermal stability of the developed composite is improved after MB adsorption.

Photocatalytic Anaerobic Dehydrogenation of Alcohols over Metal Halide Perovskites: A New Acid-Free Scheme for H2 Production

Photocatalytic H₂ evolution from haloid acid (HX) solution by metal halide perovskites (MHPs) has been intensively investigated; however, the corrosive acid solution severely restricts its practical operability. Therefore, developing acid-free schemes for H₂ evolution using MHPs is highly desired. Here, we investigate the photocatalytic anaerobic dehydrogenation of alcohols over a series of MHPs (APbX₃, A = Cs⁺, CH₃NH₃⁺ (MA), CH(NH₂)₂⁺ (FA); X = Cl^-, Br^-, I^-) to simultaneously produce H₂ and aldehydes. Via the coassembly of Pt and rGO nanosheets on MAPbBr₃ microcrystals, the optimal MAPbBr₃/rGO-Pt reaches a H₂ evolution rate of 3150 μmol g^-1 h^-1 under visible light irradiation (780 nm ≥ λ ≥ 400 nm), which is more than 105-fold higher than pure MAPbBr₃ (30 μmol g^-1 h^-1). The present work not only brings new ample opportunities toward photocatalytic H₂ evolution but also opens up new avenues for more effective utilization of MHPs in photocatalysis.

Potential of graphene based photocatalyst for antiviral activity with emphasis on COVID-19: A review

Coronavirus disease-2019 caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been one of the most challenging worldwide epidemics of recent times. Semiconducting materials (photocatalysts) could prove effectual solar-light-driven technology on account of variant reactive oxidative species (ROS), including superoxide (^•O₂ ^- ) and hydroxyl (^•OH) radicals either by degradation of proteins, DNA, RNA, or preventing cell development by terminating cellular membrane. Graphene-based materials have been exquisitely explored for antiviral applications due to their extraordinary physicochemical features including large specific surface area, robust mechanical strength, tunable structural features, and high electrical conductivity. Considering that, the present study highlights a perspective on the potentials of graphene based materials for photocatalytic antiviral activity. The interaction of virus with the surface of graphene based nanomaterials and the consequent physical, as well as ROS induced inactivation process, has been highlighted and discussed. It is highly anticipated that the present review article emphasizing mechanistic antiviral insights could accelerate further research in this field.

Inorganic-Organic Hybrid Membrane Based on Pillararene-Intercalated MXene Nanosheets for Efficient Water Purification

Discharge of antibiotic-containing wastewater causes environmental pollution and threatens biological and human health. An efficient treatment method for this wastewater is urgently required. We prepared inorganic-organic hybrid MXene-pillararene nanosheets with a large lateral size (5-8 μm). The hybrid nanosheets were stacked on supports via vacuum-assisted filtration to prepare membranes with regular parallel slits and an interlayer spacing of 1.36 nm, which were used to purify antibiotic-containing water. Permeance through the membrane increased 100-fold compared with most polymeric and other two-dimensional nanofiltration membranes with similar rejection. This high permeance and rejection was attributed to the large lateral size of the nanosheets, regular interlayer spacing, and electrostatic interaction between the membrane and antibiotics. These membranes will broaden the applications of lamellar materials for the separation of high-value-added drugs in academia and industry.

Synergetic Nanoarchitectonics of Defects and Cocatalysts in Oxygen-Vacancy-Rich BiVO4/reduced graphene oxide Mott-Schottky Heterostructures for Photocatalytic Water Oxidation

Water oxidation process is a pivotal step of photosynthesis and stimulates the progress of high-performance catalysts for renewable fuel production. Despite the performance benefit of cocatalysts, defect engineering holds promise to settle inherent limitations of semiconductors aiming at sluggish water oxidation. Here, we modify the in situ growth pathway of monoclinic BiVO₄ (m-BiVO₄) on reduced graphene oxide (rGO), constructing abundant surface oxygen vacancies (O_V)-incorporated m-BiVO₄/rGO heterostructure toward water oxidation reaction under visible light. Owing to the O_V in the m-BiVO₄ component, a vacancy-related defect level allows more electrons to be photoexcited by low-energy photons to cause the electron transition, boosting photoabsorption as well as photoexcitation. Besides, the O_V can reinforce surface adsorption and reduce the dissociation energy of water molecules. Particularly because of the synergy of O_V and cocatalyst rGO, the O_V functions as electron-trapped sites to facilitate the carrier separation; the rGO not only receives electrons from m-BiVO₄ promoted by internal electric field over Mott-Schottky heterostructures but also spurs further electron diffusion along a highly conductive carbon network. These merits enable the O_V-incorporated m-BiVO₄/rGO heterostructure with an over 209% growth in O₂ yield relative to the counterpart. The increased performance is also validated by the significant rise of ^•OH radicals and ^•O₂^- radicals. The current work paves a novel avenue for the integration of defect engineering and cocatalyst coupling in artificial photosynthesis.

Photocatalytic Anaerobic Oxidation of Aromatic Alcohols Coupled With H2 Production Over CsPbBr3/GO-Pt Catalysts

Metal halide perovskites (MHPs) have been widely investigated for various photocatalytic applications. However, the dual-functional reaction system integrated selective organic oxidation with H₂ production over MHPs is rarely reported. Here, we demonstrate for the first time the selective oxidation of aromatic alcohols to aldehydes integrated with hydrogen (H₂) evolution over Pt-decorated CsPbBr₃. Especially, the functionalization of CsPbBr₃ with graphene oxide (GO) further improves the photoactivity of the perovskite catalyst. The optimal amount of CsPbBr₃/GO-Pt exhibits an H₂ evolution rate of 1,060 μmol g⁻¹ h⁻¹ along with high selectivity (>99%) for benzyl aldehyde generation (1,050 μmol g⁻¹ h⁻¹) under visible light (λ > 400 nm), which is about five times higher than the CsPbBr₃-Pt sample. The enhanced activity has been ascribed to two effects induced by the introduction of GO: 1) GO displays a structure-directing role, decreasing the particle size of CsPbBr₃ and 2) GO and Pt act as electron reservoirs, extracting the photogenerated electrons and prohibiting the recombination of the electron–hole pairs. This study opens new avenues to utilize metal halide perovskites as dual-functional photocatalysts to perform selective organic transformations and solar fuel production.

A state of the art overview of carbon-based composites applications for detecting and eliminating pharmaceuticals containing wastewater

The growing prevalence of new toxins in the environment continues to cause widespread concerns. Pharmaceuticals, organic pollutants, heavy metal ions, endocrine-disrupting substances, microorganisms, and others are examples of persistent organic chemicals whose effects are unknown because they have recently entered the environment and are displaying up in wastewater treatment facilities. Pharmaceutical pollutants in discharged wastewater have become a danger to animals, marine species, humans, and the environment. Although their presence in drinking water has generated significant concerns, little is known about their destiny and environmental effects. As a result, there is a rising need for selective, sensitive, quick, easy-to-handle, and low-cost early monitoring detection systems. This study aims to deliver an overview of a low-cost carbon-based composite to detect and remove pharmaceutical components from wastewater using the literature reviews and bibliometric analysis technique from 1970 to 2021 based on the web of science (WoS) database. Various pollutants in water and soil were reviewed, and different methods were introduced to detect pharmaceutical pollutants. The advantages and drawbacks of varying carbon-based materials for sensing and removing pharmaceutical wastes were also introduced. Finally, the available techniques for wastewater treatment, challenges and future perspectives on the recent progress were highlighted. The suggestions in this article will facilitate the development of novel on-site methods for removing emerging pollutants from pharmaceutical effluents and commercial enterprises.

Atomically dispersed Pt inside MOFs for highly efficient photocatalytic hydrogen evolution

Pt is carried into the channels of UiO-66 with supercritical carbon dioxide to achieve high activity for hydrogen production by photolysis.

Selective oxidation of CH4 to valuable HCHO over a defective rTiO2/GO metal-free photocatalyst

A specially designed metal-free rTiO2/GO catalyst retarded the recombination of photo-generated electrons and holes and improved photocatalytic CH4 conversion performance.

Selective graphene-like metal-free 2D nanomaterials and their composites for photocatalysis

From the viewpoint of sustainability, graphene-like metal-free 2D nanomaterials (GMFs) hold great potential in different photocatalytic fields due to their distinct structures and properties. Although their lattice structures are highly similar, the properties of these nanomaterials are in vast diversity owing to the uniqueness of particular atomic arrangement, thus giving rise to their multi-faceted functionalities in photocatalytic process. In this review, we summarize the latest progress of GMFs and their hybrid composites in photocatalytic field, including graphene and its derivatives, hexagonal boron nitride (h-BN), graphitic carbon nitride (g-C₃N₄), black phosphorus (BP) and emerging 2D covalent organic frameworks (COFs). Their unique 2D structure and key photocatalytic properties are firstly briefly introduced. Then a critical discussion on their multiple roles in the activity enhancement of composite photocatalysts is emphasized, which in turn points out the direction of maximizing their functions and guides our efficient construction of hybrid photocatalysts based on above 2D nanomaterials. On this basis, a summary about the hybridization of above 2D metal-free materials is presented, and the merits of 2D/2D hybrid systems are elaborated. Last, we wrap up this review with some summative remarks, covering understanding their own unique strengths and weaknesses by comparison and proposing the major challenges and perspectives in this emerging field.

Competitive role of nitrogen functionalities of N doped GO and sensitizing effect of Bi2O3 QDs on TiO2 for water remediation

The promising solar irradiated photocatalyst by pairing of bismuth oxide quantum dots (BQDs) doped TiO₂ with nitrogen doped graphene oxide (NGO) nanocomposite (NGO/BQDs-TiO₂) was fabricated. It was used for degradation of organic pollutants like 2,4-dichlorophenol (2,4-DCP) and stable dyes, i.e. Rhodamine B and Congo Red. X-ray diffraction (XRD) profile of NGO showed reduction in oxygenic functional groups and restoring of graphitic crystal structure. The characteristic diffraction peaks of TiO₂ and its composites showed crystalline anatase TiO₂. Morphological images represent spherical shaped TiO₂ evenly covered with BQDs spread on NGO sheet. The surface linkages of NO-O-Ti, C-O-Ti, Bi-O-Ti and vibrational modes are observed by Fourier transform infrared spectroscopy (FTIR) and Raman studies. BQDs and NGO modified TiO₂ results into red shifting in visible region as studied in diffused reflectance spectroscopy (DRS). NGO and BQDs in TiO₂ are linked with defect centers which reduced the recombination of free charge carriers by quenching of photoluminescence (PL) intensities. X-ray photoelectron spectroscopy (XPS) shows that no peak related to C-O in NGO/BQDs-TiO₂ is observed. This indicated that doping of nitrogen into GO has reduced some oxygen functional groups. Nitrogen functionalities in NGO and photosensitizing effect of BQDs in ternary composite have improved photocatalytic activity against organic pollutants. Intermediate byproducts during photo degradation process of 2,4-DCP were studied through high performance liquid chromatography (HPLC). Study of radical scavengers indicated that O₂^·- has significant role for degradation of 2,4-DCP. Our investigations propose that fabricated nanohybrid architecture has potential for degradation of environmental pollutions.

Bio-inspired graphene-based nano-systems for biomedical applications

The increasing demands of environmentally sustainable, affordable, and scalable materials have inspired researchers to explore greener nanosystems of unique properties which can enhance the performance of existing systems. Such nanosystems, extracted from nature, are state-of-art high-performance nanostructures due to intrinsic hierarchical micro/nanoscale architecture and generous interfacial interactions in natural resources. Among several, bio-inspired nanosystems graphene nanosystems have emerged as an essential nano-platform wherein a highly electroactive, scalable, functional, flexible, and adaptable to a living being is a key factor. Preliminary investigation project bio-inspired graphene nanosystems as a multi-functional nano-platform suitable for electronic devices, energy storage, sensors, and medical sciences application. However, a broad understanding of bio-inspired graphene nanosystems and their projection towards applied application is not well-explored yet. Considering this as a motivation, this mini-review highlights the following; the emergence of bio-inspired graphene nanosystems, over time development to make them more efficient, state-of-art technology, and potential applications, mainly biomedical including biosensors, drug delivery, imaging, and biomedical systems. The outcomes of this review will certainly serve as a guideline to motivate scholars to design and develop novel bio-inspired graphene nanosystems to develop greener, affordable, and scalable next-generation biomedical systems.

Enhancement of Interfacial Charge Transfer of TiO2/Graphene with Doped Ca2+ for Improving Electrical Conductivity

Imparting surface coatings with conductivity is an effective way to prevent fire and explosion caused by electrostatic discharge. TiO₂ is a commonly used paint; however, intrinsic TiO₂ has poor electrical conductivity. Herein, we develop a method to make TiO₂ coating highly conductive by doping Ca²⁺ into the TiO₂ lattice based on the introduction of graphene. It is demonstrated that doping Ca²⁺ increases the carrier density of TiO₂ and its morphology changes from a sphere to a spindle shape, which increases the interfacial contact area between TiO₂ and graphene. Therefore, resistivity can be greatly decreased due to the construction of fast charge transport pathways from TiO₂ to graphene, resulting from an increase in the speed of interfacial charge transfer. In addition, the electronic properties of the samples are also studied through first-principles calculations before and after Ca²⁺ doping. The result of the theoretical analysis is in agreement with that of experiments. Thus, the lowest resistivity of Ca²⁺-TiO₂/graphene can reach 0.004 Ω cm. Consequently, the feature of superior conductivity of the Ca²⁺-TiO₂/graphene composite endows it with practical application potential in the field of antistatic coating.

Efficient solar light-driven hydrogen generation using an Sn3O4 nanoflake/graphene nanoheterostructure

Herein, we report Sn3O4 and Sn3O4 nanoflake/graphene for photocatalytic hydrogen generation from H2O and H2S under natural "sunlight" irradiation. The Sn3O4/graphene composites were prepared by a simple hydrothermal method at relatively low temperatures (150 °C). The incorporation of graphene in Sn3O4 exhibits remarkable improvement in solar light absorption, with improved photoinduced charge separation due to formation of the heterostructure. The highest photocatalytic hydrogen production rate for the Sn3O4/graphene nanoheterostructure was observed as 4687 μmol h-1 g-1 from H2O and 7887 μmol h-1 g-1 from H2S under natural sunlight. The observed hydrogen evolution is much higher than that for pure Sn3O4 (5.7 times that from H2O, and 2.2 times from H2S). The improved photocatalytic activity is due to the presence of graphene, which acts as an electron collector and transporter in the heterostructure. More significantly, the Sn3O4 nanoflakes are uniformly and parallel grown on the graphene surface, which accelerates the fast transport of electrons due to the short diffusion distance. Such a unique morphology for the Sn3O4 along with the graphene provides more adsorption sites, which are effective for photocatalytic reactions under solar light. This work suggests an effective strategy towards designing the surfaces of various oxides with graphene nanoheterostructures for high performance of energy-conversion devices.

Roles of Graphene Oxide in Heterogeneous Photocatalysis

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Chromium and cerium co-doped magnetite/reduced graphene oxide nanocomposite as a potent antibacterial agent against S. aureus

The development of innovative antibacterial samples with high efficacy has received a great deal of interest. Herein, we synthesized magnetite modified by Cr and co-modified by Cr and Ce, along with their reduced graphene oxide (rGO)-based nanocomposites via facile hydrothermal and co-precipitation methods. The rGO-based samples showed proper magnetic behavior, high porosity, and vast specific surface area. The high specific surface area provided more adsorptive active sites with higher potentials for the decomposition of Staphylococcus aureus (S. aureus) cells. The antibacterial performance of the samples against S. aureus was evaluated at 50 and 100 μg mL^-1 through the colony-forming unit (CFU) method and the minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) values were subsequently determined. As per results, not only chromium cations could effectively damage the DNA of bacteria, but also the antibacterial efficacy was further enhanced by co-doping of cerium and the integration with rGO nanosheets. The antibacterial results were confirmed through the changes observed in the morphology and topology of the bacteria before and after the treatment using SEM and AFM analyses. Ultimately, the plausible S. aureus inactivation mechanism of the samples was disclosed.

Hybridization of Molecular and Graphene Materials for CO2 Photocatalytic Reduction with Selectivity Control

In the quest for designing efficient and stable photocatalytic materials for CO₂ reduction, hybridizing a selective noble-metal-free molecular catalyst and carbon-based light-absorbing materials has recently emerged as a fruitful approach. In this work, we report about Co quaterpyridine complexes covalently linked to graphene surfaces functionalized by carboxylic acid groups. The nanostructured materials were characterized by X-ray photoemission spectroscopy, X-ray absorption spectroscopy, IR and Raman spectroscopies, high-resolution transmission electron microscopy and proved to be highly active in the visible-light-driven CO₂ catalytic conversion in acetonitrile solutions. Exceptional stabilities (over 200 h of irradiation) were obtained without compromising the selective conversion of CO₂ to products (>97%). Most importantly, complete selectivity control could be obtained upon adjusting the experimental conditions: production of CO as the only product was achieved when using a weak acid (phenol or trifluoroethanol) as a co-substrate, while formate was exclusively obtained in solutions of mixed acetonitrile and triethanolamine.

Photocatalytic Degradation of Sulfolane Using a LED-Based Photocatalytic Treatment System

Sulfolane is an emerging industrial pollutant detected in the environments near many oil and gas plants in North America. So far, numerous advanced oxidation processes have been investigated to treat sulfolane in aqueous media. However, there is only a few papers that discuss the degradation of sulfolane using photocatalysis. In this study, photocatalytic degradation of sulfolane using titanium dioxide (TiO2) and reduced graphene oxide TiO2 composite (RGO-TiO2) in a light-emitting diode (LED) photoreactor was investigated. The impact of different waters (ultrapure water, tap water, and groundwater) and type of irradiation (UVA-LED and mercury lamp) on photocatalytic degradation of sulfolane were also studied. In addition, a reusability test was conducted for the photocatalyst to examine the degradation of sulfolane in three consecutive cycles with new batches of sulfolane-contaminated water. The results show that LED-based photocatalysis was effective in degrading sulfolane in waters even after three photocatalytic cycles. UVA-LEDs displayed more efficient use of photon energy when compared with the mercury lamps as they have a narrow emission spectrum coinciding with the absorption of TiO2. The combination of UVA-LED and TiO2 yielded better performance than UVA-LED and RGO-TiO2 for the degradation of sulfolane. Much lower sulfolane degradation rates were observed in tap water and groundwater than ultrapure water.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

State-of-the-art developments in carbon-based metal nanocomposites as a catalyst: photocatalysis

The rapid progress of state-of-the-art carbon-based metals as a catalyst is playing a central role in the research area of chemical and materials engineering for effective visible-light-induced catalytic applications. Numerous admirable catalysts have been fabricated, but significant challenges persist to lower the cost and increase the action of catalysts. The development of carbon-based nanostructured materials (i.e., activated carbon, carbon nitride, graphite, fullerenes, carbon nanotubes, diamond, graphene, etc.) represents an admirable substitute to out-of-date catalysts. Significant efforts have been made by researchers toward the improvement of various carbon-based metal nanostructures as catalysts. Moreover, incredible development has been achieved in several fields of catalysis, such as visible-light-induced catalysis, electrochemical performance, energy storage, and conversion, etc. This review gives an overview of the up-to-date developments in the strategy of design and fabrication of carbon-based metal nanostructures as photo-catalysts by means of several methods within the green approach, including chemical synthesis, in situ growth, solution mixing, and hydrothermal approaches. Moreover, the photocatalytic effects of the resulting carbon-based nanostructure classifications are similarly deliberated relative to their eco-friendly applications, such as photocatalytic degradation of organic dye pollutants.

Enhanced visible light-driven photocatalytic activity of reduced graphene oxide/cadmium sulfide composite: Methylparaben degradation mechanism and toxicity

Reduced graphene oxide/cadmium sulfide (RGOCdS) nanocomposite synthesized through solvothermal process was used for methylparaben (MeP) degradation. The crystallinity of the nanocomposite was ascertained through X-ray diffraction. High resolution transmission electron microscope (HRTEM) results proved the absence of any free particle beyond the catalyst surface ensuring the composite nature of the prepared material. The enhancement in the activity on doping with RGO was substantiated by diffuse reflectance spectroscopy (DRS-UV). It is evident from the photocatalytic degradation experiments that RGOCdS is more efficient than pure CdS. Maximum MeP degradation (100%) was achieved after 90 min of irradiation with 750 mg/L RGOCdS dosage at an acidic pH of 3, for an initial MeP concentration of 30 mg/L. The degradation mechanism substantiated through HPLC-MS/MS analysis showed the complete degradation of MeP without any residual intermediaries. The catalyst could be sustained and reused for up to 9 cycles of usage. Phytotoxicity and mycotoxicity results evidently ascertain the environmental implications of the photocatalyst material.

Ru x Pd y Alloy Nanoparticles Uniformly Anchored on Reduced Graphene Oxide Nanosheets (Ru x Pd y @rGO): A Recyclable Catalyst

In this work, Ru _x Pd _y alloy nanoparticles were uniformly decorated on a two-dimensional reduced graphene oxide (rGO) sheet by an in situ chemical co-reduction process. The resulting products were characterized by various physiochemical techniques such as X-ray diffraction, Raman spectroscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma atomic absorption spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. Further, the synthesized Ru _x Pd _y @rGO nanocomposites have been employed as a heterogeneous catalyst for three different catalytic reactions: (1) dehydrogenation of aqueous ammonia borane (AB); (2) hydrogenation of aromatic nitro compounds using ammonia borane as the hydrogen source, and (3) for the synthesis of aromatic azo derivatives. The present work illustrates the sustainable anchoring of metal nanoparticles over the surface of rGO nanosheets, which could be used for multifarious catalytic reactions.

Design of earth-abundant Z-scheme g-C3N4/rGO/FeOOH ternary heterojunctions with excellent photocatalytic activity

A ternary Z-scheme g-C₃N₄/rGO/FeOOH heterostructure photocatalyst for H₂ production was designed and fabricated, which exhibited photocatalytic H₂ production of 124.9 and 869.8 μmol h⁻¹ g⁻¹ under visible and UV-Vis light irradiation, respectively.

Graphene-based frustrated Lewis pairs as bifunctional catalysts for CO2 reduction via the dissociative chemisorption of molecular H2: a periodic density functional perspective

Nanocarbon-based frustrated Lewis pair (FLP) bifunctional catalysts, on account of their unquenched electron transfer property, are becoming increasingly attractive as catalysts for the CO₂ reduction reaction via the dissociative chemisorption of H₂.