Fluorescent probes and bioimaging: alkali metals, alkaline earth metals and pH

Colorimetric pH-sensing of artificial gastric fluid using naphthalimide-based CH acids

In this study, we introduce novel colorimetric pH-sensing probes based on naphthalimide malonate derivatives. These probes were synthesized by reacting 4-bromo-1,8-naphthalimide with various malonates, including malononitrile, ethyl cyanoacetate, and diethyl malonate. Each derivative exhibited distinct pH-sensing characteristics due to their differing CH acidities. The malononitrile-based probe, NPI-N2, demonstrated pronounced chromogenic pH-signaling behavior, transitioning from colorless to red-violet, accompanied by a decrease in fluorescence intensity. Notably, NPI-N2 retained its pH-sensing capability in the presence of common metal ions, anions, and pepsin, a key component of gastric fluid. The pKa of NPI-N2 was determined to be 3.08 through pH-dependent absorbance curve fitting. To modulate the pH-sensing range, ester-nitrile (NPI-EN) and diethyl ester (NPI-E2) subunits were incorporated into the naphthalimide framework, resulting in increased pKa values of 6.73 and 10.76, respectively. The pH-signaling mechanism of NPI-N2 was elucidated by 1H and 13C NMR spectroscopy, revealing deprotonation of the malononitrile moiety and subsequent resonance extension through the naphthalimide structure. To facilitate practical pH determination, NPI-N2 was integrated into a paper-based test strip, enabling convenient and reliable pH measurement of artificial gastric fluid.

Reactive oxygen species-mediated organic long-persistent luminophores light up biomedicine: from two-component separated nano-systems to integrated uni-luminophores

Organic luminophores have been widely utilized in cells and in vivo fluorescence imaging but face extreme challenges, including a low signal-to-noise ratio (SNR) and even false signals, due to non-negligible background signals derived from real-time excitation lasers. To overcome these challenges, in the last decade, functionalized organic long-persistent luminophores have gained much attention. Such luminophores could not only overcome the biological toxicity of inorganic long-persistent luminescent materials (metabolic toxicity and leakage risk of inorganic heavy metals), but also continue to emit long-persistent luminescence after removing the excitation source, thus effectively improving imaging quality. More importantly, organic long-persistent luminophores have good structure tailorability for the construction of activable probes, which is favorable for biosensing. Recently, the development of reactive oxygen species (ROS)-mediated long-persistent (ROSLP) luminophores (especially organic small-molecule ROSLP luminophores) is still in the rising stage. Notably, ROSLP luminophores for in vivo imaging have experienced from two-component separated nano-systems to integrated uni-luminophores, which obtained gradually better designability and biocompatibility. In this review, we summarize the progress and challenges of organic long-persistent luminophores, focusing on their development history, long-persistent luminescence working mechanisms, and biomedical applications. We hope that these insights will help scientists further develop functionalized organic long-persistent luminophores for the biomedical field.

Visualizing plant salt stress with a NaCl-responsive fluorescent probe

Salt stress is an adverse environmental condition that harms plant growth and development. The development of salt stress probes is critical for tracking the growth dynamics of plants, molecular breeding or screening of growth regulators. The sodium chloride (NaCl)-responsive fluorescent probe Aza-CyBz is designed based on the tenet that NaCl induces formation of ordered aggregates, and the sensitive fluorescence response can enable the visualization of plant salt stress in root tip tissues and live plants. Herein, we describe a detailed three-step route for synthesis of Aza-CyBz and applications to monitoring salt stress in Arabidopsis thaliana. The procedures for operating fluorescence imaging under various stresses are also listed to eliminate interference from the oxidative mechanism of salt stress. Compared with conventional invasive approaches such as inductively coupled plasma emission spectrometry and flame photometer, our protocol can real-time monitor salt stress experienced by plants, which demands simple pretreatment procedure and staining technique. Due to near infrared fluorescence, this method provides direct visual observation of salt stress at both tissue and live plant levels, which is superior to conventional noninvasive approaches. The preparation of probe Aza-CyBz takes ~2 d, and the imaging experiments for assessing salt stress experienced by plants, including the preparation of stressed plant samples takes ~9-11 d for root tip tissues and ~23 d for live plants. Notably, acquisition and analysis visual images of salt stress in plants can be completed within 2 h and they require only a basic knowledge of spectroscopy and chemistry.

Construction of a pH- and viscosity-switchable near-infrared fluorescent probe and its imaging application

Viscosity is a parameter used to measure the fluidity of liquids and a key indicator in evaluating the states of body fluid in biological tissues and lesions. Most traditional detection methods have many drawbacks such as a short emission wavelength and interference by background fluorescence. Inspired by the multiple double bond structure of retinal, a novel pH and viscosity dual-response fluorescent probe (Rh-TR) was constructed in this study. Rh-TR exhibited two emission signals centered at 510 and 660 nm. As the pH of the phosphate-buffered saline increased, the fluorescence at 510 nm increased by about 124-fold, while the change in fluorescence at 660 nm was not obvious. When detecting the change in viscosity using the probe, the fluorescence at 510 nm decreased by about 85 %, while the fluorescence at 660 nm increased by over 20-fold. The probe also showed high selectivity and little toxicity. As demonstrated by the biological imaging experiment, the probe successfully imaged changes in the pH and viscosity of cells and in a live animal model of zebrafish. Considering the unique structure of Rh-TR with retinal and its pH- and viscosity-switchable spectral property, the probe may find further application in detecting viscosity-related diseases and industrial detection.

Near-Infrared Ratiometric Hemicyanine Fluorescent Probes for Monitoring Mitochondrial pH Dynamics in Live Cells during Oxidative Stress and Hypoxia

Novel near-infrared ratiometric molecules (probes A and B) produced by linking formyl-functionalized xanthene and methoxybenzene moieties, respectively, onto a xanthene-hemicyanine framework are detailed. Probe A exhibited a primary absorption peak at 780 nm and a shoulder peak at 730 nm and exhibited fluorescence at 740 nm↓ (signifies a downward shift in intensity upon acidification) in a pH 9.3 buffer and 780 nm↑ at pH 2.8 under excitation at 700 nm. Probe B featured absorptions at 618 and 668 nm at pH 3.2 and at 717 nm at pH 8.6, and fluorescence at 693 nm↑ at pH 3.2 and at 739 nm↓ at pH 8.6, in mostly the red to near-IR region. The ratiometric changes in the intensity of the fluorescent absorptions were reversed between A and B upon acidification as indicated by the arrows. Theoretical calculations confirmed that there were slight changes in conformation between probes and the protonated molecules, suggesting that the changes in emission spectra were due mostly to conjugation effects. Calculations at the APFD/6-311+g(d,p) level with a solvent described by the polarizable continuum model resulted in pK a values for A at 6.33 and B at 6.41, in good agreement with the experimentally determined value of 6.97 and an average of 6.40, respectively. The versatilities of the probes were demonstrated in various experimental contexts, including the effective detection of mitochondrial pH fluctuations. Live cell experiments involving exposure to different pH buffers in the presence of H+ ionophores, monitoring mitophagy processes during cell starvation, studying hypoxia induced by CoCl2 treatment, and investigating responses to various oxidative stresses are detailed. Our findings highlight the potential of attaching xanthene and methoxybenzaldehyde groups onto xanthene-hemicyanine structures as versatile tools for monitoring pH changes in a variety of cellular environments and processes.

Variations in fluorescence properties of humic acids from calcareous soils amended with different swine manures in a long-term soil experiment

Molecular properties of soil humic acid (HA) can play an important role in the mechanisms regulating plant nutrient availability. This study explores how the structure of HA is altered by long-term treatment with different forms of swine manure and how these changes may influence nutrient availability. Liquid swine manure (LSM), solid swine manure (SSM), and swine manure compost (SMC) were applied to a calcareous soil over 17 years in a long-term soil fertility study. HA was extracted from site soil samples and analyzed using fluorescence spectroscopic techniques, including a Cu2+ quenching experiment, in order to assess differences in the structure and functionality of the soil organic matter (SOM) resulting from these different treatments. Emission spectra of the SSM-HA and SMC-HA are similar, while the LSM-HA is distinct. Procedures such as parallel factor analysis (PARAFAC) decomposition of emission-excitation matrices showed that structures in the SSM-HA and SMC-HA samples have lower complexity, whereas the structures of LSM-HA are of higher complexity. Interactions with Cu2+ at different pH levels indicate that the LSM-HA shows more dynamic conformational changes as well as stronger interactions and higher quenching efficiency compared to the other treatments. Conversely, SMC-HA demonstrates relatively stable binding constant (Ka) values across different pH levels. The binding constants and quenching efficiency of SSM-HA are significantly affected by changes in pH. This study shows distinct structural characteristics of HA formed under different manure management systems and provides valuable insights into how these variations may impact nutrient dynamics in soils.

Development of Optical Nanosensors for Detection of Potassium Ions and Assessment of Their Biocompatibility with Corneal Epithelial Cells

Imbalance of potassium-ion levels in the body can lead to physiological dysfunctions, which can adversely impact cardiovascular, neurological, and ocular health. Thus, quantitative measurement of potassium ions in a biological system is crucial for personal health monitoring. Nanomaterials can be used to aid in disease diagnosis and monitoring therapies. Optical detection technologies along with molecular probes emitting within the near-infrared (NIR) spectral range are advantageous for biological measurements due to minimal interference from light scattering and autofluorescence within this spectral window. Herein, we report the development of NIR fluorescent nanosensors, which can quantitatively detect potassium ions under biologically relevant conditions. The optical nanosensors were developed by using photoluminescent single-walled carbon nanotubes (SWCNTs) encapsulated in polymers that contain potassium chelating moieties. The nanosensors, polystyrene sulfonate [PSS-SWCNTs, nanosensor 1 (NS1)] or polystyrene-co-polystyrene sulfonate [PS-co-PSS-SWCNTs, nanosensor 2 (NS2)], exhibited dose-dependent optical responses to potassium ion level. The nanosensors demonstrated their biocompatibility via the evaluation of cellular viability, proliferation assays, and expression of cytokeratin 12 in corneal epithelial cells (CEpiCs). Interestingly, the nanosensors' optical characteristics and their responses toward CEpiCs were influenced by encapsulating polymers. NS2 exhibited a 10 times higher fluorescence intensity along with a higher signal-to-noise ratio as compared to NS1. NS2 showed an optical response to potassium ion level in solution within 5 min of addition and a limit of detection of 0.39 mM. Thus, NS2 was used for detailed investigations including potassium ion level detection in serum. NS2 showed a consistent response to potassium ions at the lower millimolar range in serum. These results on optical sensing along with biocompatibility show a great potential for nanotube sensors in biomedical research.

An Aggregation-Induced Emission-Based Dual Emitting Nanoprobe for Detecting Intracellular pH and Unravelling Metabolic Variations in Differentiating Lymphocytes

Monitoring T lymphocyte differentiation is essential for understanding T cell fate regulation and advancing adoptive T cell immunotherapy. However, current biomarker analysis methods necessitate cell lysis, leading to source depletion. Intracellular pH (pHi) can be affected by the presence of lactic acid (LA), a metabolic mediator of T cell activity such as glycolysis during T cell activation; therefore, it is a potentially a good biomarker of T cell state. In this work, a dual emitting enhancement-based nanoprobe, namely, AIEgen@F127-AptCD8, was developed to accurately detect the pHi of T cells to "read" the T cell differentiation process. The nanocore of this probe comprises a pair of AIE dyes, TPE-AMC (pH-sensitive moiety) and TPE-TCF, that form a donor-acceptor pair for sensitive detection of pHi by dual emitting enhancement analysis. The nanoprobe exhibits a distinctly sensitive narrow range of pHi values (from 6.0 to 7.4) that can precisely distinguish the differentiated lymphocytes from naïve ones based on their distinct pHi profiles. Activated CD8+ T cells demonstrate lower pHi (6.49 ± 0.09) than the naïve cells (7.26 ± 0.11); Jurkat cells exhibit lower pHi (6.43 ± 0.06) compared to that of nonactivated ones (7.29 ± 0.09) on 7 days post-activation. The glycolytic product profiles in T cells strongly correlate with their pHi profiles, ascertaining the reliability of probing pHi for predicting T cell states. The specificity and dynamic detection capabilities of this nanoprobe make it a promising tool for indirectly and noninvasively monitoring T cell activation and differentiation states.

Rational design of pH-responsive near-infrared spirocyclic cyanines: the effects of substituents and the external environment

pH-responsive spirocyclic cyanine dyes were designed and synthesized. The equilibrium constant for cyclization (pKcycl) could be rationally controlled by changing the nucleophilic moiety and the side chains. Encapsulation in polymeric micelles inhibited the H-aggregation of the dye, and the pKcycl could be shifted according to the amphiphilic polymer employed.

Alkali and alkaline earth elements in follicular fluid and the likelihood of diminished ovarian reserve in reproductive-aged women: a case‒control study

BACKGROUND

Imbalances in alkali elements (AEs) and alkaline earth elements (AEEs) cause reproductive disorders. However, it remains unclear whether AEs/AEEs in follicular fluid have a relationship with the serious reproductive disorder known as diminished ovarian reserve (DOR).

METHODS

A nested case‒control study was carried out in China. Follicular fluid samples from 154 DOR patients and 154 controls were collected and assessed for nine AEs/AEE levels. Both the mixed and single effects of the elements on DOR were estimated with a Bayesian kernel machine (BKMR) and logistic regressions.

RESULTS

The DOR group had higher median concentrations of Li, Na, and K in follicular fluid (all P values < 0.05). The logistic regression showed that compared with their lowest tertile, the high tertiles of K [OR:2.45 (1.67-4.43)], Li [OR: 1.89 (1.06-3.42)], and Cs [OR: 1.97 (1.10-3.54)] were significantly associated with the odds of DOR. The BKMR model reported that the DOR likelihood increased linearly across the 25th through 75th percentiles of the nine-AE/AEE mixture, while the AE group contributed more to the overall effect.

CONCLUSION

This study revealed an association in which the likelihood of DOR increased with higher overall concentrations of AE/AEEs in follicular fluid. Among the nine detected elements, K, Li, and Cs exhibited significant individual associations with DOR. We provide new clues for the environmental factors on female fertility decline.

TRIAL REGISTRATION

Retrospectively registered.

A fluorescent probe for ultrarapid H2O2 detection during reagent-stimulated oxidative stress in cells and zebrafish

Hydrogen peroxide(H2O2), as a reliable signaling biomolecule for oxidative stress, its accurate detection during agent-stimulated oxidative stress plays a vital role in pathological and physiological mechanism exploration for disease theranostics. It's necessary to develop an efficient method for their detection. In view of the advantages of fluorescent probes, we rationally constructed a novel fluorescent probe Compound 2 based on 4-(Bromomethyl)benzeneboronic acid pinacol ester_Herein, a small molecule fluorescent probe was fabricated using isoflore nitrile as fluorescent group, phenylboronic acid pinacol ester as the response group, to detect H2O2. The probe Compound 2 has a strong fluorescence intensity at 575 nm, indicating that the structure of the probe molecule is reasonably designed, and the Stokes shift is up to 172 nm. While the detection time is as low as 30 s and the LOD of the probe for H2O2 is as low as 3.7 μmol/L,the quantum yield is Φ = 40.31 %. It has been successfully used for imaging detection of H2O2 in HepG2 cells and zebrafish for its low toxicity. It can be found that this small molecule fluorescent probe can identify H2O2 in tumor cells significantly and efficiently, which would realize the early diagnosis of tumor.

A novel ratiometric fluorescent sensor from modified coumarin-grafted cellulose for precise pH detection in strongly alkaline conditions

Accurate and convenient monitoring of pH under extreme alkaline conditions is still a challenge. In this work, 4-(3-(7-hydroxy-2-oxo-2H-chromen-3-yl)-3-oxoprop-1-en-1-yl)benzamide (HCB), a coumarin derivative, was grafted onto dialdehyde cellulose (DAC) to obtain a sensor DAC-HCB, which exhibited a ratiometric fluorescent response to the pH of alkaline solutions, resulting in a significant fluorescent color change from yellow to blue (FI459 nm/FI577 nm) at pH 7.5-14. The structure of DAC-HCB was characterized through FT-IR, XRD, XPS, SEM. The pKa of sensor DAC-HCB was 13.16, and the fluorescent intensity ratio FI459 nm/FI577 nm possessed an excellent linear characteristic with pH in the scope of 9.0-13.0. Meanwhile, sensor DAC-HCB showed good selectivity, anti-interference, and fast response time to basic pH, which is an effective fluorescent sensor for examination of pH in alkali circumstance. The recognition mechanism of DAC-HCB to OH- was elucidated with HRMS and density-functional theory (DFT) computational analyses. Sensor DAC-HCB was successfully used for precise detection of environmental water samples pH. This work furnished a new protocol for test strips as a convenient and highly efficient pH detection tool for the high pH environment, and it has great potential for application in environmental monitoring.

Monitoring Hierarchical Assembly of Ring-in-Ring and Russian Doll Complexes Based on Carbon Nanoring by Förster Resonance Energy Transfer

We presented the construction of the ring-in-ring and Russian doll complexes on the basis of triptycene-derived carbon nanoring (TP-[12]CPP), which not only acts as a host for pillar[5]arene (P5A) but also serves as an energy donor for building Förster resonance energy transfer (FRET) systems. We also demonstrated that their hierarchical assembly processes could be efficiently monitored in real time using FRET. NMR, UV-vis and fluorescence, and mass spectroscopy analyses confirmed the successful encapsulation of the guests P5A/P5A-An by TP-[12]CPP, facilitated by C-H···π and ···π interactions, resulting in the formation of a distinct ring-in-ring complex with a binding constant of Ka = 2.23 × 104 M-1. The encapsulated P5A/P5A-An can further reverse its role to be a host for binding energy acceptors to form Russian doll complexes, as evidenced by the occurrence of FRET and mass spectroscopy analyses. The apparent binding constant of the Russian doll complexes was up to 3.6 × 104 M-1, thereby suggesting an enhanced synergistic effect. Importantly, the Russian doll complexes exhibited both intriguing one-step and sequential FRET dependent on the subcomponent P5A/P5A-An during hierarchical assembly, reminiscent of the structure and energy transfer of the light-harvesting system presented in purple bacteria.

A near-infrared emitting "off-on" fluorescent probe for bioimaging of Pd(Ⅱ) ions in living cells and mice

BACKGROUND

The surging consumption of palladium in modern industry has given rise to its accumulation in the ecosystem, posing conspicuous toxicity to aquatic organisms and human health. The investigation of palladium in biological systems is highly demanded for the in-depth understanding of its dynamics and behaviors. Fluorescence imaging serves as a powerful approach to assess palladium species in biological systems, and currently most of the sensing probes are applicable to living cells. Effective tracking of palladium species in living organisms is challenging, which requires sufficient hydrophilicity and imaging depth of the probes.

RESULTS

Based on an intramolecular charge transfer (ICT) mechanism, a distyryl boron dipyrromethene (BODIPY) derivative (DISBDP-Pd) has been prepared for the near-infrared (NIR) fluorescence imaging of Pd2+ ions. Two additional methoxy triethylene glycol (TEG) chains could serve as flexible and hydrophilic moieties to enhance the aqueous solubility and cell permeability of the extended conjugate. Solution studies revealed that DISBDP-Pd exhibited a NIR fluorescence enhancement signal exclusively to Pd2+ ions (detection limit as low as 0.85 ppb) with negligible interference from Pd0 species and other closely related metal ions. Computational calculations have been performed to rationalize the binding mode and the mechanism of action. Fluorescence imaging assays have been conducted on A549 human non-small cell lung carcinoma cells and mouse models. Exhibiting negligible cytotoxicity, DISBDP-Pd demonstrated concentration-related fluorescence enhancement signals in response to Pd2+ ions in living cells and mice.

SIGNIFICANCE

DISBDP-Pd exhibits advantages over many small molecule palladium probes in terms of satisfactory aqueous solubility, high sensitivity and selectivity, and biocompatible NIR emission property, which are particularly favorable for the sensing application in biological environments. The design strategy of this probe can potentially be adopted for the functionalization of other BODIPY probes implemented for NIR fluorescence bioimaging.

Synthesis of an aggregation-induced emission (AIE) dye with pH-sensitivity based on tetraphenylethylene-pyridine for fluorescent nanoparticles and its applications in bioimaging and in vitro anti-tumor effect

In this contribution, a novel AIE monomers 2-(4-styrylphenyl)- 1,2-diphenylvinyl)styryl)pyridine (SDVPY) with smart fluorescent pH-sensitivity basing on tetraphenylethylene-pyridine were successfully synthesized for the first time, subsequently, a series of amphiphilic copolymers PEG-PY were achieved by reversible addition-fragmentation chain transfer (RAFT) polymerization of SDVPY and poly(ethylene glycol) methacrylate (PEGMA), which would self-assemble in water solution to form core-shell nanoparticles (PEG-PY FONs) with about 150 nm diameter. The PEG-PY FONs showed obvious fluorescence response to Fe3+, HCO3- and CO32- ions in aqueous solution owing to their smart pH-sensitivity and AIE characteristics, and their maximum emission wavelength could reversibly change from 525 nm to 624 nm. The as-prepared PEG-PY FONs showed also prospective application in cells imaging with the variable fluorescence for different pH cells micro-environment. When PEG-PY copolymers self-assembled with the anti-tumor drug paclitaxel (PTX), the obtained PY-PTX FONs could effectively deliver and release PTX with pH-sensitivity, and could be easily internalized by A549 cells and located at the cytoplasm with high cytotoxicity, which was further confirmed by the Calcein-AM/PI staining of dead and alive A549 cells. Moreover, the flow cytometry results indicated that the PY-PTX FONs could obviously induce the apoptosis of A549 cells, which further showed the great potential of PY-PTX FONs in the application of tumors therapy.

A novel turn-on fluorescent probe for detection of pH in extremely acidic environment and its application

A water-soluble turn-on fluorescent probe PNAP for pH has been designed and synthesized. PNAP was consist of pyrene as fluorophore and morpholine as receptor. Owing to the photoinduced electron transfer (PET) effect, the fluorescence of PNAP was quenched, while PNAP exhibited a remarkable "turn-on" fluorescence with the increase of acidity. Notably for its pKa of 2.15, PNAP was one of the pH fluorescent probes used in extremely acidic environments. Furthermore, PNAP also displayed good repeatability, strong anti-ion interference ability, high sensitivity and selectivity toward pH. In addition, PNAP has been successfully applied to the test strips and monitor the pH of environment water samples and realistic samples, showing its good promising prospect.

Getting the Most Out of Fluorogenic Probes: Challenges and Opportunities in Using Single-Molecule Fluorescence to Image Electro- and Photocatalysis

Single-molecule fluorescence microscopy enables the direct observation of individual reaction events at the surface of a catalyst. It has become a powerful tool to image in real time both intra- and interparticle heterogeneity among different nanoscale catalyst particles. Single-molecule fluorescence microscopy of heterogeneous catalysts relies on the detection of chemically activated fluorogenic probes that are converted from a nonfluorescent state into a highly fluorescent state through a reaction mediated at the catalyst surface. This review article describes challenges and opportunities in using such fluorogenic probes as proxies to develop structure-activity relationships in nanoscale electrocatalysts and photocatalysts. We compare single-molecule fluorescence microscopy to other microscopies for imaging catalysis in situ to highlight the distinct advantages and limitations of this technique. We describe correlative imaging between super-resolution activity maps obtained from multiple fluorogenic probes to understand the chemical origins behind spatial variations in activity that are frequently observed for nanoscale catalysts. Fluorogenic probes, originally developed for biological imaging, are introduced that can detect products such as carbon monoxide, nitrite, and ammonia, which are generated by electro- and photocatalysts for fuel production and environmental remediation. We conclude by describing how single-molecule imaging can provide mechanistic insights for a broader scope of catalytic systems, such as single-atom catalysts.

Fabrication of a New Coumarin Based Fluorescent "turn-on" Probe for Distinct and Sequential Recognition of Al3+ and F- Along With Its Application in Live Cell Imaging

A new coumarin based fluorescent switch PCEH is fabricated which displays high selective sensing towards Al3+ among other metal cations at physiological pH. On gradual addition of Al3+, PCEH shows a brilliant "turn-on" emission enhancement in MeOH/H2O (4/1, v/v) solution. This new fluorescent switch is proven to be a reversible probe by gradual addition of F- into the PCEH-Al3+ solution. Detection limit as well as binding constant values are calculated to be in the order of 10-9 M and 104 M-1 respectively. We have also explored its potential as a biomarker in the application of live cell imaging using breast cancer cells (MDA-MB-231 cell).

A fully π-conjugated covalent organic framework with dual binding sites for ultrasensitive detection and removal of divalent heavy metal ions

Covalent organic frameworks (COFs) have become a promising candidate for the remediation of heavy metal pollution. However, researches on COF adsorbents still have challenges on maintaining good optical properties and adsorption performance under harsh conditions. Herein, a fully π-conjugated COF with dual binding sites (Bpy-sp2c-COF) is reported for rapid fluorescence recognition and enhanced adsorption towards divalent heavy metal ions. The vinylene-linkage lattice shows strong luminescence and excellent stability in both strong acidity and basicity. Bpy-sp2c-COF demonstrates not only nanomolar-scale detection of divalent heavy metal ions, but also good adsorption capacity (Hg2+ 718.48, Ni2+ 278.64, Cu2+ 260.11, and Co2+ 126.23 mg/g). Experimental and theoretical studies reveal the intramolecular charge transfer as the fluorescence quenching mechanism. Further simulation results demonstrate the cyano and bipyridine groups on the lattice can act as dual binding sites for divalent heavy metal ions. Experimental results confirmed the adsorption capacity of Bpy-sp2c-COF superior to that of COFs with either cyano groups (Hg2+ 415.34, Ni2+ 165.60, Cu2+ 160.55, and Co2+ 73.14 mg/g), or bipyridine groups (Hg2+ 369.25, Ni2+ 133.41, Cu2+ 133.32, and Co2+ 69.23 mg/g). Besides, robust regeneration of the adsorbent could be achieved over 10 cycles. The fully π-conjugated COF with dual binding sites provides a new approach for designing next-generation sensors and adsorbents with excellent performances.

Surface Reconstruction and Passivation of BiVO4 Photoanodes Depending on the "Structure Breaker" Cs. JACS AU 2023;3:1851-1863. [PMID: 37502161 PMCID: PMC10369408 DOI: 10.1021/jacsau.3c00100] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Monoclinic BiVO₄ is one of the most promising photoanode materials for solar water splitting. The photoelectrochemical performance of a BiVO₄ photoanode could be significantly influenced by the noncovalent interactions of redox-inert metal cations at the photoanode-electrolyte interfaces, but this point has not been well investigated. In this work, we studied the Cs⁺-dependent surface reconstruction and passivation of BiVO₄ photoanodes. Owing to the "structure breaker" nature of Cs⁺, the Cs⁺ at the BiVO₄ photoanode-electrolyte interfaces participated in BiVO₄ surface photocorrosion to form a Cs⁺-doped bismuth vanadium oxide amorphous thin layer, which inhibited the continuous photocorrosion of BiVO₄ and promoted surface charge transfer and water oxidation. The resulting cocatalyst-free BiVO₄ photoanodes achieved 3.3 mA cm^-2 photocurrent for water oxidation. With the modification of FeOOH catalysts, the photocurrent at 1.23 V_RHE reached 5.1 mA cm^-2, and a steady photocurrent of 3.0 mA cm^-2 at 0.8 V_RHE was maintained for 30 h. This work provides new insights into the understanding of Cs⁺ chemistry and the effects of redox-inert cations at the electrode-electrolyte interfaces.

Rigidized 3-aminocoumarins as fluorescent probes for strongly acidic environments and rapid yeast vacuolar lumen staining: mechanism and application

Coumarins remain one of the most important groups of fluorescent bio-probes, thanks to their high quantum yields, moderate photostability, efficient cell permeation and low (cyto)toxicity. Herein, we introduce new 3-aminocoumarins as turn-on pH probes under strongly acidic conditions and for indicators capable of significantly improving yeast vacuolar lumen staining compared to the commercial CMAC derivatives. We present the details of the on-off switching mechanism revealed by the TD-DFT and ab initio calculations complemented by a Franck-Condon analysis of the probes' emission profiles.

High luminescent N,S,P co-doped carbon dots for the fluorescence sensing of extreme acidity and folic acid

Carbon dots are popular luminescent materials because of their excellent fluorescence properties, but the low quantum yield limits their application. Heteroatom doping is a more convenient and popular approach to increase the quantum yield of carbon dots. Here, novel N,S,P heteroatom co-doped carbon dots (N,S,P-CDs) were synthesized by a simple one-step hydrothermal method using m-phenylenediamine, L-cysteine and phosphoric acid as raw materials. The as-prepared N,S,P-CDs showed excellent photoluminescence properties with a fluorescence quantum yield of up to 41%, which greatly encourages their application in fluorescence sensing. The N,S,P-CDs exhibited good fluorescence stability under salt solution, xenon lamp irradiation and ultraviolet lamp irradiation except for a high sensitivity to extreme acidity. The fluorescence intensity of the N,S,P-CDs can be decreased by as much as 85% when the pH of the solution changes from 2.50 to 4.75, that is, a small fluctuation in pH can cause an intense response of the fluorescence of the N,S,P-CDs. Therefore, an excellent fluorescence sensing platform for accurately monitoring the pH of extreme acidity has been constructed. In addition, the N,S,P-CDs can be applied for quantitative detection of folic acid based on the strong quenching effect of folic acid on the fluorescence of the N,S,P-CDs. Good linearity was obtained in the concentration range of 4.85-82.45 μM, with a detection limit of 0.148 μM. The constructed sensing platform was used for the determination of folic acid in actual samples of orange juice, oatmeal and tablets with satisfactory results.

A novel fluorescent molecule based on 1,2,3-triazole for determination of palladium (II) and hydrazine hydrate in aqueous system

In recent years, hydrazine hydrate has been widely used in various fields as fuel and chemical raw materials, etc. However, hydrazine hydrate is also a potential threat to living body and natural environment. The effective method is urgently needed to detect hydrazine hydrate in our living environment. Secondly, as a precious metal, palladium has attracted more and more attention because of its excellent properties in industrial manufacturing and chemical catalysis. However, its potential danger is also slowly approaching, so it is necessary to find an excellent way to detect palladium, too. Herein, a fluorescent molecule, 4,4',4'',4'''-(1,4-phenylenebis(2H-1,2,3-triazole-2,4,5-triyl)) tetrabenzoic acid (NAT), was synthesized. Firstly, NAT has very high selectivity and sensitivity for determination of Pd²⁺, because Pd²⁺ can coordinate well with carboxyl oxygen of NAT. The detection performance of Pd²⁺ is that the linear range is from 0.06 to 4.50 μM and the detection limit is 16.4 nM. Furthermore, the chelate (NAT-Pd²⁺) can continue to be used for quantitative determination of hydrazine hydrate with a linear range of 0.05-6.00 μM and the detection limit is 19.1 nM. The interaction time of NAT-Pd²⁺ and hydrazine hydrate is about 10 min. Of course, it also has good selectivity and strong anti-interference ability for many common metal ions, anions and amine like compounds. At last, the ability of NAT to quantitatively detect Pd²⁺ and hydrazine hydrate in actual samples has also been verified and the results are very satisfactory.

Recent progress of TP/NIR fluorescent probes for metal ions

Metal ions are of significance in various pathological and physiological processes. As such, it is crucial to monitor their levels in organisms. Two-photon (TP) and near-infrared (NIR) fluorescence imaging has been utilized to monitor metal ions because of minimal background interference, deeper tissue depth penetration, lower tissue self-absorption, and reduced photodamage. In this review, we briefly summarize recent progress from 2020 to 2022 of TP/NIR organic fluorescent probes and inorganic sensors in the detection of metal ions. Additionally, we present an outlook for the development of TP/NIR probes for bio-imaging, diagnosis of diseases, imaging-guided therapy, and activatable phototherapy.

A novel strategy of engineering genetically encoded probe for ultrasensitive sensing Hg2+ with unusual planar trigonometric coordination configuration

At present, few genetically encoded fluorescent probes are currently available for the analysis of toxic heavy metal ions, and most have poor performance that cannot meet the requirements of sensitive and dynamic detection in living cells. In this study, we designed a single fluorescent protein-based probe sfGFP-MerBD, which can specifically response to Hg²⁺ with high binding affinity and wide dynamic range. More importantly, the developing probe can timely and reversibly monitor changes of Hg²⁺ concentration in living mammalian cells. The excellent performance of this probe is largely due to the recognition element of the probe, MerBD, which adopts an unusual planar trigonometric coordination configuration with Hg²⁺, and the coordination can cause enough conformational change to influence the fluorescence of skeleton protein sfGFP coupled with it. The small peptide MerBD was delicately designed based on the three-dimensional structure of metalloprotein MerR. This novel design strategy solves the challenging problems that there are few natural functional proteins in the process of constructing fluorescent probes for toxic metal ions and some functional proteins cannot be directly used as recognition elements. Based on the new strategy, more genetically encoded fluorescent probes of toxic heavy metal ions can be efficiently constructed and applied in the future.

Lanthanide-based luminescent probes for biological magnesium: accessing polyphosphate-bound Mg2

Biomolecule-bound Mg2+ species, particularly polyphosphate complexes, represent a large and dynamic fraction of the total cellular magnesium that is essential for cellular function but remains invisible to most indicators. Here we report a new family of Eu(III)-based indicators, the MagQEu family, functionalized with a 4-oxo-4H-quinolizine-3-carboxylic acid metal recognition group/sensitization antenna for turn-on, luminescence-based detection of biologically relevant Mg2+ species.

Cellulose-Based Fluorescent Material for Extreme pH Sensing and Smart Printing Applications

Environment-responsive fluorescence materials are being widely investigated for instrument-free determination of various environmental factors. However, developing an eco-friendly cellulose-based fluorescent pH sensor for sensing extreme acidity and alkalinity is still challenging. Herein, a highly fluorescent and multifunctional material is developed from biopolymer-based cellulose acetate. A biopolymer-based structure containing responsive functional groups such as -C═O and -NH is constructed by chemically bonding 5-amino-2,3-dihydrophthalazine-1,4-dione (luminol) onto cellulose acetate using 4,4'-diphenylmethane diisocyanate (MDI) as a cross-linking agent. The prepared material (Lum-MDI-CA) is characterized by UV-vis, Fourier transform infrared, ¹H NMR, ¹³C NMR spectroscopies, and fluorescence techniques. The material exhibits excellent aqua blue fluorescence and demonstrates extreme pH sensing applications. Interesting results are further revealed after adding a pH-unresponsive dye such as MTPP as the reference to develop the ratiometric method. The ratiometric system clearly differentiates the extreme acidic pH 1 from pH 2 and extreme alkaline pH 12, 13, and 14 by visual and fluorescence color change response under a narrow pH range. In addition, the material is fabricated into transparent flexible fluorescent films which demonstrate an outstanding UV shielding, security printing, and haze properties for smart food packaging and printing applications.

An anthraimidazoledione-based charge transfer probe for dual mode sensing of calcium ions: role of the counter ion in signal improvement

An anthraimidazoledione-based amphiphilic probe has been designed for dual-mode sensing of Ca²⁺ ions at physiological pH in a buffered medium. The compound showed deep pink color in the native state due to intramolecular charge transfer from the imidazole to the anthraquinone moiety. The addition of Ca²⁺ ions resulted changes in solution color to orange with a concomitant appearance of blue-colored fluorescence. The mechanistic investigations indicate that the Ca²⁺ ion binds to the APTRA moiety on the donor site, which leads to a blue-shift in the absorption maxima. Most importantly, because of the naked-eye response, this method does not need sophisticated visualizing instruments for the analysis. Interestingly, the counter ion showed a significant impact on the extent of Ca²⁺ sensing. The fluorescence response was large when Cs⁺ (loose ion pair) was considered as the counter ion instead of K⁺ (tight ion pair). Furthermore, the present system can achieve the detection of Ca²⁺ ions in real-life water samples and also in the presence of serum albumin protein. The high recovery values along with small standard deviations indicate the suitability of the present method in analyzing real-life samples. Finally, dye-coated paper strips were developed for rapid, on-location detection of Ca²⁺ ions.

Three-Component Synthesis of Dioxaphosphorane-Fused Diphosphacycles Exhibiting Unique Dynamic Fluorescence "On/Off" Properties

Rigidly planar polycyclic phosphacycles featuring an internal dioxaphosphorane are promising photofunctional materials. However, the lack of efficient synthetic methods resulted in limited structural diversities which significantly hampered extensive study. Herein, we report a straightforward three-component synthesis of novel dioxaphosphorane-fused diphosphacycles with distinctive photophysical properties. Control experiments and theory calculations were performed to account for a plausible reaction mechanism. We also systematically investigated the structure-property relationships of these unprecedented platforms by combining experiments (X-ray analysis, optical and redox properties) and theoretical computations. Based on their unique structure and properties, a novel fluorescent switch for pH sensing was revealed by a dynamic ring-opening/ring-closing process.

Detection of alkali and alkaline earth metal ions using birefringence of hyperswollen lamellar phase

Chemical sensors have targeted various substances. Most sensors electrically amplify signals. Here, we propose a visual detection system that uses a hyperswollen lamellar phase and detects targets in a solution without electric amplification. Amphiphiles with an oligo(ethylene glycol) chain can catch alkali and alkaline earth metal ions and amplify to macroscopic birefringence.

One-step rapid colorimetric detection of K+ using silver nanoparticles modified by crown ether

Urinary potassium is an important parameter in clinical health diagnosis. Rapid and convenient detection of potassium ions (K⁺) in urine is essential for personal healthcare and health management. Here, crown ether (4-aminodibenzo-18-crown-6, ADC) modified silver nanoparticles (ADC-Ag NPs) were successfully prepared for one-step rapid colorimetric detection of urinary potassium. The detection mechanism is as follows: due to the matching sizes of the diameter of K⁺ and the cavity in crown ether 6, K⁺ is encapsulated between the cavities of two crown ethers, resulting in the clumping of ADC-Ag NPs and the color of the solution being altered. The colorimetric detection method has a fast response and is completed within 20 minutes. It also shows good selectivity and interference immunity. The lowest detectable concentration is 20 μM with the naked eye and 2.16 μM for UV-vis absorption spectroscopy. A good linear relationship (R² = 0.9931) between the absorption intensity ratio and K⁺ concentration (0-100 μM) indicates that this colorimetric probe can be used to detect K⁺. The method was also applied for quantitative analysis of K⁺ in real urine samples with recovery between 116 and 120%.

Highly efficient carbon dots for quantitatively visualizing pH fluctuations in cells, zebrafish, mice and tumors

In vivo pH is closely related to complicated physiological and pathological processes. Quantitatively probing pH and visualizing pH variation via fluorescence (FL) imaging technique in living cells and organisms is crucial but difficult to accomplish. Herein, green fluorescent carbon dots (CDs) were synthesized, and their distinct advantages of extraordinarily high fluorescence quantum yield (FQY, 71.4%), unique photostability, high selectivity, sterling biocompatibility, appropriate pKa for biosensing, enable CDs to serve as pH-activatable probes for real time quantitative detection of continuous pH fluctuation in living cells, zebrafish, mice and tumors. We believe CDs are presently among the best-of-breed pH probes for comprehensive biomedical applications.

Neuron devices: emerging prospects in neural interfaces and recognition

Neuron interface devices can be used to explore the relationships between neuron firing and synaptic transmission, as well as to diagnose and treat neurological disorders, such as epilepsy and Alzheimer's disease. It is crucial to exploit neuron devices with high sensitivity, high biocompatibility, multifunctional integration and high-speed data processing. During the past decades, researchers have made significant progress in neural electrodes, artificial sensory neuron devices, and neuromorphic optic neuron devices. The main part of the review is divided into two sections, providing an overview of recently developed neuron interface devices for recording electrophysiological signals, as well as applications in neuromodulation, simulating the human sensory system, and achieving memory and recognition. We mainly discussed the development, characteristics, functional mechanisms, and applications of neuron devices and elucidated several key points for clinical translation. The present review highlights the advances in neuron devices on brain-computer interfaces and neuroscience research.

New nanostructured extracellular potassium ion probe for assay of cellular K+ transport

The concentration of potassium ion is an important indicator for human health, and its abnormality is often accompanied by various diseases. However, most tools currently used to study potassium ion transport are low throughput. Herein, we reported a new K⁺ fluorescent nanoprobe CP1-KS with high selectivity and sensitivity to K⁺ (fluorescence enhanced factor was up to 9.91 at 20 mM K⁺). The polymeric fluorescent probe CP1-KS was composed of the small-molecular K⁺ indicator KS and amphiphilic copolymer CP1. This sensor can be easily and uniformly dispersed in cell culture medium and is suitable for high throughput analysis. To assess the utility of the probe CP1-KS in biological field, this probe was employed as an extracellular fluorescent probe to monitor the efflux of K⁺ from cells (E coli, B. Subtilis 168, Hela and MCF-7 cells) under various stimulation including lysozyme, nigericin, digitonin, and ATP. Results demonstrated that CP1-KS is an effective analysis tool for extracellular K⁺ concentration. We believe that the nanoprobe has great potential in antibacterial drug screening, K⁺ ionophore function, K⁺ channel activity, cell membrane permeability analysis or other K⁺ related field in the future.

Selective Detection of Mg 2+ for Sensing Applications in Drinking Water

A new series of ligands containing the 2‐(2‐hydroxy‐3‐ naphthyl)‐4‐methylbenzoxazole (HNBO) fluorophore showed selectivity for Mg²⁺ ions, without the interference of Ca²⁺. The most promising representative L3 resulted the best performing sensor for Mg²⁺ both in solution and embedded in an all‐solid‐state optode, especially towards real samples of drinkable water.

Microrobotic Swarms for Intracellular Measurement with Enhanced Signal-to-Noise Ratio

In cell biology, fluorescent dyes are routinely used for biochemical measurements. The traditional global dye treatment method suffers from low signal-to-noise ratios (SNR), especially when used for detecting a low concentration of ions, and increasing the concentration of fluorescent dyes causes more severe cytotoxicity. Here, we report a robotic technique that controls how a low amount of fluorescent-dye-coated magnetic nanoparticles accurately forms a swarm and increases the fluorescent dye concentration in a local region inside a cell for intracellular measurement. Different from existing magnetic micromanipulation systems that generate large swarms (several microns and above) or that cannot move the generated swarm to an arbitrary position, our system is capable of generating a small swarm (e.g., 1 μm) and accurately positioning the swarm inside a single cell (position control accuracy: 0.76 μm). In experiments, the generated swarm inside the cell showed an SNR 10 times higher than the traditional global dye treatment method. The high-SNR robotic swarm enabled intracellular measurements that had not been possible to achieve with traditional global dye treatment. The robotic swarm technique revealed an apparent pH gradient in a migrating cell and was used to measure the intracellular apparent pH in a single oocyte of living C. elegans. With the position control capability, the swarm was also applied to measure calcium changes at the perinuclear region of a cell before and after mechanical stimulation. The results showed a significant calcium increase after mechanical stimulation, and the calcium increase was regulated by the mechanically sensitive ion channel, PIEZO1.

Fluorescent Probes Design Strategies for Imaging Mitochondria and Lysosomes

Modern cellular biology faces several major obstacles, such as the determination of the concentration of active sites corresponding to chemical substances. In recent years, the popular small-molecule fluorescent probes have completely changed the understanding of cellular biology through their high sensitivity toward specific substances in various organisms. Mitochondria and lysosomes are significant organelles in various organisms, and their interaction is closely related to the development of various diseases. The investigation of their structure and function has gathered tremendous attention from biologists. The advanced nanoscopic technologies have replaced the diffraction-limited conventional imaging techniques and have been developed to explore the unknown aspects of mitochondria and lysosomes with a sub-diffraction resolution. Recent progress in this field has yielded several excellent mitochondria- and lysosome-targeted fluorescent probes, some of which have demonstrated significant biological applications. Herein, we review studies that have been carried out to date and suggest future research directions that will harness the considerable potential of mitochondria- and lysosome-targeted fluorescent probes.

Aggregation and Binding-Directed FRET Modulation of Conjugated Polymer Materials for Selective and Point-of-Care Monitoring of Serum Albumins

Nonspecific interactions of conjugated polymers (CPs) with various proteins prove to be a major impediment for researchers when designing a suitable CP-based probe for the amplified and selective recognition of particular proteins in complex body fluids. Herein, a new strategy is presented for the precise and specific monitoring of clinically important serum albumin (SA) proteins at the nanomolar level using fluorescence resonance energy transfer (FRET)-modulated CP-surfactant ensembles as superior sensing materials. In brief, the newly designed color-tunable CP PF-DBT-Im undergoes intense aggregation with the surfactant sodium dodecyl sulfate (SDS), enabling drastic change in the emission color from violet to deep red due to intermolecular FRET. The emission of PF-DBT-Im/SDS ensembles then changed from deep red to magenta specifically on addition of SAs owing to the exclusive reverse FRET facilitated by synergistic effects of electrostatic interactions, hydrophobic forces, and the comparatively high intrinsic quantum yield of SAs. Interestingly, PF-DBT-Im itself could not differentiate SAs from other proteins, demonstrating the superiority of the PF-DBT-Im/SDS self-assembly over PF-DBT-Im. Finally, an affordable smartphone-integrated point-of-care (PoC) device is also fabricated as a proof-of-concept for the on-site and rapid monitoring of SAs, validating the potential of the system in long-term clinical applications.

Surface-enhanced Raman scattering: An emerging tool for sensing cellular function

Continuous long-term intracellular imaging and multiplexed monitoring of biomolecular changes associated with key cellular processes remains a challenge for the scientific community. Recently, surface-enhanced Raman scattering (SERS) has been demonstrated as a powerful spectroscopic tool in the field of biology owing to its significant advantages. Some of these include the ability to provide molecule-specific information with exquisite sensitivity, working with small volumes of precious samples, real-time monitoring, and optimal optical contrast. More importantly, the availability of a large number of novel Raman reporters with narrower full width at half maximum (FWHM) of spectral peaks/vibrational modes than conventional fluorophores has created a versatile palette of SERS-based probes that allow targeted multiplex sensing surpassing the detection sensitivity of even fluorescent probes. Due to its nondestructive nature, its applicability has been recognized for biological sensing, molecular imaging, and dynamic monitoring of complex intracellular processes. We critically discuss recent developments in this area with a focus on different applications where SERS has been used for obtaining information that remains elusive for conventional imaging methods. Current reports indicate that SERS has made significant inroads in the field of biology and has the potential to be used for in vivo human applications. This article is categorized under: Diagnostic Tools > In Vitro Nanoparticle-Based Sensing Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > Biosensing Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Investigation of a benzodiazaborine library to identify new pH-responsive fluorophores

The detection of pH is important owing to its significance in various processes, such as clinical and industrial processes. Numerous fluorescent pH probes have been developed using a variety of fluorophores; however, most are only suitable for application in a narrow pH range (between 5 and 8) owing to the lack of diversity of the pH-sensitive units. Furthermore, probes suitable for sensing high pHs have rarely been studied despite the importance of reliable detection of high pH in various industrial processes. In this study, we prepared a benzodiazaborine (bDAB) library consisting of 238 different bDABs through combinatorial synthesis to investigate their suitability as fluorescent pH probes. Informed by the results of a fluorescence-based, high-throughput screening of the library, we identified four bDABs that exhibit promising pH-sensitive ratiometric fluorescence responses. Their pK_as vary significantly, ranging from 7.29 to 12.44, indicating their suitability for the detection of basic pHs even in extremely basic environments (pH > 10). Furthermore, their fluorescence responses show high stability, anti-interference, and reversibility under various pH conditions.