Sodium Hypophosphite as a Halogen Atom Transfer (XAT) Agent under Photocatalytic Conditions

The ability of sodium hypophosphite to generate the phosphorus-centered radical, which can activate the carbon-halogen bond via the halogen atom transfer (XAT) is described. The hydroalkylation of nonactivated alkenes with methyl bromoacetate was performed using sodium hypophosphite as reducing agent under photocatalytic conditions. The key phosphorus centered radical is formed from the hypophosphite anion by hydrogen atom abstraction.

Discovery andsynthesis of novel benzoylhydrazone neuraminidase inhibitors

Neuraminidase (NA) serves as a promising target for the exploration and development of anti-influenza drugs. In this work, lead compound 5 was discovered through pharmacophore-based virtual screening and molecular dynamics simulation, and 14 new compounds were obtained by modifying the lead compound 5 based on pharmacophore features. The biological activity test shows that 5n (IC50 = 0.13 μM) has a better inhibitory effect on wild-type NA (H5N1), while 5i (IC50 = 0.44 μM) has a prominent inhibitory effect on mutant NA (H5N1-H274Y), both of them are better than the positive control oseltamivir carboxylate (OSC). The analysis of docking results indicate that the good activities of compounds 5n and 5i may be attributed to the thiophene ring in 5n can stretch into the 150-cavity of NA, whereas the thiophene moiety in 5i can extend to the 430-cavity of NA. The findings of this study may be helpful for the discovery of new NA inhibitors.

Recycling and Degradation of Polyamides

As one of the five major engineering plastics, polyamide brings many benefits to humans in the fields of transportation, clothing, entertainment, health, and more. However, as the production of polyamide increases year by year, the pollution problems it causes are becoming increasingly severe. This article reviews the current recycling and treatment processes of polyamide, such as chemical, mechanical, and energy recovery, and degradation methods such as thermal oxidation, photooxidation, enzyme degradation, etc. Starting from the synthesis mechanism of polyamide, it discusses the advantages and disadvantages of different treatment methods of polyamide to obtain more environmentally friendly and economical treatment schemes. Finding enzymes that can degrade high-molecular-weight polyamides, exploring the recovery of polyamides under mild conditions, synthesizing environmentally degradable polyamides through copolymerization or molecular design, and finally preparing degradable bio-based polyamides may be the destination of polyamide.

Manganese-Catalyzed Hydrogenation of Amides and Polyurethanes: Is Catalyst Inhibition an Additional Barrier to the Efficient Hydrogenation of Amides and Their Derivatives?

The hydrogenation of amides and other less electrophilic carbonyl derivatives with an N-C=O functionality requires significant improvements in scope and catalytic activity to be a genuinely useful reaction in industry. Here, we report the results of a study that examined whether such reactions are further disadvantaged by nitrogen-containing compounds such as aliphatic amines acting as inhibitors on the catalysts. In this case, an enantiomerically pure manganese catalyst previously established to be efficient in the hydrogenation of ketones, N-aryl-imines, and esters was used as a prototype of a manganese catalyst. This was accomplished by doping a model ester hydrogenation with various nitrogen-containing compounds and monitoring progress. Following from this, a protocol for the catalytic hydrogenation of amides and polyurethanes is described, including the catalytic hydrogenation of an axially chiral amide that resulted in low levels of kinetic resolution. The hypothesis of nitrogen-containing compounds acting as an inhibitor in the catalytic hydrogenation process has also been rationalized by using spectroscopy (high-pressure infrared (IR), nuclear magnetic resonance (NMR)) and mass spectrometry studies.

Depolymerization of Technical-Grade Polyamide 66 and Polyurethane Materials through Hydrogenation

Chemical recycling provides a promising solution to utilize plastic waste. Here, a catalytic hydrogenative depolymerization of polyamide 66 (PA 66) and polyurethane (PU) was developed. The system employed Ru pincer complexes at high temperature (200 °C) in THF solution, and even technical-grade polymers could be hydrogenated with satisfactory yields under these conditions. A comparison of the system with some known heterogeneous catalysts as well as catalyst poisoning tests supported the homogeneity of the system. These results demonstrate the potential of chemical recycling to regain building blocks for polymers and will be interesting for the further development of polymer hydrogenation.

Indirect reduction of CO2 and recycling of polymers by manganese-catalyzed transfer hydrogenation of amides, carbamates, urea derivatives, and polyurethanes

The reduction of polar bonds, in particular carbonyl groups, is of fundamental importance in organic chemistry and biology. Herein, we report a manganese pincer complex as a versatile catalyst for the transfer hydrogenation of amides, carbamates, urea derivatives, and even polyurethanes leading to the corresponding alcohols, amines, and methanol as products. Since these compound classes can be prepared using CO2 as a C1 building block the reported reaction represents an approach to the indirect reduction of CO2. Notably, these are the first examples on the reduction of carbamates and urea derivatives as well as on the C-N bond cleavage in amides by transfer hydrogenation. The general applicability of this methodology is highlighted by the successful reduction of 12 urea derivatives, 26 carbamates and 11 amides. The corresponding amines, alcohols and methanol were obtained in good to excellent yields up to 97%. Furthermore, polyurethanes were successfully converted which represents a viable strategy towards a circular economy. Based on control experiments and the observed intermediates a feasible mechanism is proposed.

Combined KOH/BEt3 Catalyst for Selective Deaminative Hydroboration of Aromatic Carboxamides for Construction of Luminophores

The selective catalytic C-N bond cleavage of amides into value-added amine products is a desirable but challenging transformation. Molecules containing iminodibenzyl motifs are prevalent in pharmaceutical molecules and functional materials. Here we established a combined KOH/BEt₃ catalyst for deaminative hydroboration of acyl-iminodibenzyl derivatives, including nonheterocyclic carboxamides, to the corresponding amines. This novel transition-metal-free methodology was also applied to the construction of Clomipramine and luminophores.

Hydrogenative Depolymerization of Nylons

The widespread crisis of plastic pollution demands discovery of new and sustainable approaches to degrade robust plastics such as nylons. Using a green and sustainable approach based on hydrogenation, in the presence of a ruthenium pincer catalyst at 150 °C and 70 bar H₂, we report here the first example of hydrogenative depolymerization of conventional, widely used nylons and polyamides, in general. Under the same catalytic conditions, we also demonstrate the hydrogenation of a polyurethane to produce diol, diamine, and methanol. Additionally, we demonstrate an example where monomers (and oligomers) obtained from the hydrogenation process can be dehydrogenated back to a poly(oligo)amide of approximately similar molecular weight, thus completing a closed loop cycle for recycling of polyamides. Based on the experimental and density functional theory studies, we propose a catalytic cycle for the process that is facilitated by metal–ligand cooperativity. Overall, this unprecedented transformation, albeit at the proof of concept level, offers a new approach toward a cleaner route to recycling nylons.

Homogeneous and heterogeneous catalytic reduction of amides and related compounds using molecular hydrogen

Catalytic hydrogenation of amides is of great interest for chemists working in organic synthesis, as the resulting amines are widely featured in natural products, drugs, agrochemicals, dyes, etc. Compared to traditional reduction of amides using (over)stoichiometric reductants, the direct hydrogenation of amides using molecular hydrogen represents a greener approach. Furthermore, amide hydrogenation is a highly versatile transformation, since not only higher amines (obtained by C–O cleavage), but also lower amines and alcohols, or amino alcohols (obtained by C–N cleavage) can be selectively accessed by fine tuning of reaction conditions. This review describes the most recent advances in the area of amide hydrogenation using H₂ exclusively and molecularly defined homogeneous as well as nano-structured heterogeneous catalysts, with a special focus on catalyst development and synthetic applications.

Catalytic hydrogenation of amides is a pivotal chemical transformation for both research labs and chemical production in industry. Here, the authors comprehensively review this topic by including state-of-art homogeneous and heterogeneous catalysts that can hydrogenate amides and related compounds.

Synthesis and Characterization of Quinoline-3-Carboxamide Derivatives as Inhibitors of the ATM Kinase

BACKGROUND

The importance of inhibiting the kinases of the DDR pathway for radiosensitizing cancer cells is well established. Cancer cells exploit these kinases for their survival, which leads to the development of resistance towards DNA damaging therapeutics.

OBJECTIVE

In this article, the focus is on targeting the key mediator of the DDR pathway, the ATM kinase. A new set of quinoline-3-carboxamides, as potential inhibitors of ATM, is reported.

METHODS

Quinoline-3-carboxamide derivatives were synthesized and cytotoxicity assay was performed to analyze the effect of molecules on different cancer cell lines like HCT116, MDA-MB-468, and MDA-MB-231.

RESULTS

Three of the synthesized compounds showed promising cytotoxicity towards a selected set of cancer cell lines. Western Blot analysis was also performed by pre-treating the cells with quercetin, a known ATM upregulator, by causing DNA double-strand breaks. SAR studies suggested the importance of the electron-donating nature of the R group for the molecule to be toxic. Finally, Western-Blot analysis confirmed the down-regulation of ATM in the cells. Additionally, the PTEN negative cell line, MDA-MB-468, was more sensitive towards the compounds in comparison with the PTEN positive cell line, MDA-MB-231. Cytotoxicity studies against 293T cells showed that the compounds were at least three times less toxic when compared with HCT116.

CONCLUSION

In conclusion, these experiments will lay the groundwork for the evolution of potent and selective ATM inhibitors for the radio- and chemo-sensitization of cancer cells.

Recent Advances in Homogeneous Catalysis via Metal–Ligand Cooperation Involving Aromatization and Dearomatization

Recently, an increasing number of metal complex catalysts have been developed to achieve the activation or transformation of substrates based on cooperation between the metal atom and its ligands. In such “cooperative catalysis,” the ligand not only is bound to the metal, where it exerts steric and electronic effects, but also functionally varies its structure during the elementary processes of the catalytic reaction. In this review article, we focus on metal–ligand cooperation involving aromatization and dearomatization of the ligand, thus introducing the newest developments and examples of homogeneous catalytic reactions.

Homogeneous cobalt-catalyzed deoxygenative hydrogenation of amides to amines

Herein, the first general and efficient homogeneous cobalt-catalyzed deoxygenative hydrogenation of amides to amines is presented.

Selective reduction of formamides to O-silylated hemiaminals or methylamines with HSiMe2Ph catalyzed by iridium complexes

The reaction of (4-methyl-pyridin-2-iloxy)ditertbutylsilane (NSitBu-H, 1) with [IrCl(coe)2]2 affords the iridium(iii) complex [Ir(H)(Cl)(κ2-NSitBu)(coe)] (2), which has been fully characterized including X-ray diffraction studies. The reaction of 2 with AgCF3SO3 leads to the formation of species [Ir(H)(CF3SO3)(κ2-NSitBu)(coe)] (3). The iridium complexes 2 and 3 are effective catalysts for the reduction of formamides with HSiMe2Ph. The selectivity of the reduction process depends on the catalyst. Thus, by using complex 2, with a chloride ancillary ligand, it has been possible to selectively obtain the corresponding O-silylated hemiaminal by reaction of formamides with one equivalent of HSiMe2Ph, while complex 3, with a triflate ligand instead of chloride, catalyzed the selective reduction of formamides to the corresponding methylamine.

Palladium doping of In2O3 towards a general and selective catalytic hydrogenation of amides to amines and alcohols

The first general heterogeneous hydrogenation of amides to amines and alcohols is performed under additive-free conditions and without product de-aromatization by applying a Pd-doped In₂O₃ catalyst.

Hydride-catalyzed selectively reductive cleavage of unactivated tertiary amides using hydrosilane

The first hydride-catalyzed reductive cleavage of tertiary amides using the hydrosilane as reducing reagent has been developed. This transition-metal-free process may offer a versatile alternative to current systems for the selective reductive cleavage of amides.

Hydrogenation of carbonyl compounds of relevance to hydrogen storage in alcohols

Alcohols are a promising source for the sustainable production of hydrogen that may also serve as rechargeable liquid organic hydrogen carriers (LOHCs). Metal-catalyzed acceptorless dehydrogenation of alcohols produces carbonyl derivatives as H2-depleted by-products, which by means of a hydrogenation reaction can be reconverted to the initial alcohols. Hence, reversible H2-storage systems based on pairs of secondary alcohols/ketones and primary alcohols/carboxylic acid derivatives may be envisaged. In this contribution, the hydrogenation of carbonyl derivatives, including ketones, esters, amides and carboxylic acids, is reviewed from the perspective of the hydrogen storage in alcohols.

A new route to N-aromatic heterocycles from the hydrogenation of diesters in the presence of anilines

The hydrogenation of dicarboxylic acids and their esters in the presence of anilines provides a new synthesis of heterocycles. [Ru(acac)3] and 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) gave good to excellent yields of the cyclic amines at 220 °C. When aqueous ammonia was used with dimethyl 1,6-hexadienoic acid, ε-caprolactam was obtained in good yield. A side reaction involving alkylation of the amine by methanol was suppressed by using diesters derived from longer chain and branched alcohols. Hydrogenation of optically pure diesters (dimethyl (R)-2-methylbutanedioate and dimethyl (S)-2-methylbutanedioate) with aniline afforded racemic 3-methyl-1-phenylpyrrolidine in 78% yield.

Multifaceted catalytic hydrogenation of amides via diverse activation of a sterically confined bipyridine-ruthenium framework

Amides are ubiquitous and abundant in nature and our society, but are very stable and reluctant to salt-free, catalytic chemical transformations. Through the activation of a “sterically confined bipyridine–ruthenium (Ru) framework (molecularly well-designed site to confine adsorbed H₂ in)” of a precatalyst, catalytic hydrogenation of formamides through polyamide is achieved under a wide range of reaction conditions. Both C=O bond and C–N bond cleavage of a lactam became also possible using a single precatalyst. That is, catalyst diversity is induced by activation and stepwise multiple hydrogenation of a single precatalyst when the conditions are varied. The versatile catalysts have different structures and different resting states for multifaceted amide hydrogenation, but the common structure produced upon reaction with H₂, which catalyzes hydrogenation, seems to be “H–Ru–N–H.”

Efficient and selective hydrogenation of amides to alcohols and amines using a well-defined manganese-PNN pincer complex

Novel well-defined NNP and PNP manganese pincer complexes have been synthetized and fully characterized. The catalyst Mn-2 containing an imidazolyaminolphosphino ligand shows high activity and selectivity in the hydrogenation of a wide range of secondary and tertiary amides to the corresponding alcohols and amines, under relatively mild conditions. For the first time, more challenging substrates like primary aromatic amides including an actual herbicide can also be hydrogenated using this earth-abundant metal-based pincer catalyst.

Towards a general ruthenium-catalyzed hydrogenation of secondary and tertiary amides to amines

A broad range of secondary and tertiary amides has been hydrogenated to the corresponding amines under mild conditions using an in situ catalyst generated by combining [Ru(acac)3], 1,1,1-tris(diphenylphosphinomethyl)ethane (Triphos) and Yb(OTf)3. The presence of the metal triflate allows to mitigate reaction conditions compared to previous reports thus improving yields and selectivities in the desired amines. The excellent isolated yields of two scale-up experiments corroborate the feasibility of the reaction protocol. Control experiments indicate that, after the initial reduction of the amide carbonyl group, the reaction proceeds through the reductive amination of the alcohol with the amine arising from collapse of the intermediate hemiaminal.

Unprecedented iron-catalyzed selective hydrogenation of activated amides to amines and alcohols

The first example of hydrogenation of activated amides to amines and alcohols catalyzed by an earth-abundant iron metal complex is discovered. A wide range of trifluoromethyl-substituted secondary and tertiary aromatic and aliphatic amides were hydrogenated.

A Fortuitous, Mild Catalytic Carbon–Carbon Bond Hydrogenolysis by a Phosphine-Free Catalyst

The putative catalyst trans-[Ru((S,S)-skewphos)(H)2((R,R)-dpen)] (skewphos = 2,4-bis(diphenylphosphino)pentane; dpen = 1,2-diphenylethylenediamine) transforms the trifluoroacetyl amide 2,2,2-trifluoro-1-(piperidin-1-yl)ethanone under mild conditions (4 atm H2, room temperature, 4–24 h, 1 mol-% Ru, 15 mol-% KOtBu in tetrahydrofuran) to generate the formylated amine 1-formylpiperidine and fluoroform via C–C bond hydrogenolysis. Catalysts are also prepared by reacting cis-[Ru(η3-C3H5)(MeCN)2(COD)]BF4 (COD = 1,5-cyclooctadiene) with diamine ligands in situ. Low-temperature NMR studies provided insight into this reaction.