Real-time analysis of diaquat dibromide monohydrate in water with a SERS-based integrated microdroplet sensor

Internal standard optimization advances sensitivity and robustness of ratiometric detection method

We design a p-aminothiophenol (pATP) modified Au/ITO chip to determine nitrite ions in lake water by a ratiometric surface-enhanced Raman scattering (SERS) method based on nitrite ions triggering the transformation of pATP to p,p'-dimercaptoazobenzene (DMAB). Intriguingly, by using the SERS peak (at 1008 cm-1) from benzoic ring deforming as an internal standard instead of the traditional peak at 1080 cm-1, the detection sensitivity of the method was improved 10 times.

Microfluidics for disease diagnostics based on surface-enhanced raman scattering detection

This review reports diverse microfluidic systems utilizing surface-enhanced Raman scattering (SERS) detection for disease diagnosis. Integrating SERS detection technology, providing high-sensitivity detection, and microfluidic technology for manipulating small liquid samples in microdevices has expanded the analytical capabilities previously confined to larger settings. This study explores the principles and uses of various SERS-based microfluidic devices developed over the last two decades. Specifically, we investigate the operational principles of documented SERS-based microfluidic devices, including continuous-flow channels, microarray-embedded microfluidic channels, droplet microfluidic channels, digital droplet channels, and gradient microfluidic channels. We also examine their applications in biomedical diagnostics. In conclusion, we summarize the areas requiring further development to translate these SERS-based microfluidic technologies into practical applications in clinical diagnostics.

Hot-Electron Dynamics Mediated Medical Diagnosis and Therapy

Surface plasmon resonance excitation significantly enhances the absorption of light and increases the generation of "hot" electrons, i.e., conducting electrons that are raised from their steady states to excited states. These excited electrons rapidly decay and equilibrate via radiative and nonradiative damping over several hundred femtoseconds. During the hot-electron dynamics, from their generation to the ultimate nonradiative decay, the electromagnetic field enhancement, hot electron density increase, and local heating effect are sequentially induced. Over the past decade, these physical phenomena have attracted considerable attention in the biomedical field, e.g., the rapid and accurate identification of biomolecules, precise synthesis and release of drugs, and elimination of tumors. This review highlights the recent developments in the application of hot-electron dynamics in medical diagnosis and therapy, particularly fully integrated device techniques with good application prospects. In addition, we discuss the latest experimental and theoretical studies of underlying mechanisms. From a practical standpoint, the pioneering modeling analyses and quantitative measurements in the extreme near field are summarized to illustrate the quantification of hot-electron dynamics. Finally, the prospects and remaining challenges associated with biomedical engineering based on hot-electron dynamics are presented.

Constructing a Ring-like Self-Aggregation SERS Sensor with the Coffee Ring Effect for Ultrasensitive Detection and Photocatalytic Degradation of the Herbicides Paraquat and Diquat

A strategy for building ring-like deposit surface-enhanced Raman scattering (SERS) sensors with the coffee ring effect through the functional modification of the silica nanoparticle surface encapsulated by free-tagged Ag nanoparticles is addressed along with their applications in the SERS-based detection and degradation of target species, including paraquat, diquat, and their free radicals. The nanogap formed by two interparticles with SERS hotspots provides a gigantic amplification signal for the Raman scattering intensity of the analyte molecule located approximately at the hotspots. The enhanced Raman spectrum signals of these target analytes were achieved through the hotspot region of the surface plasmon resonance (SPR) located on the embankment formed by self-aggregation of SiO₂@Ag nanoparticles due to the coffee ring effect. Meanwhile, the intrinsic properties of Ag nanoparticles embedded onto the silica surface were applied to photocatalytically degrade the target analytes by harvesting energy from sunlight. The SERS sensor detected the analytes down to 10^-9 M in the aqueous solution.

Advances in droplet microfluidics for SERS and Raman analysis

Raman spectroscopy can realize qualitative and quantitative characterization, and surface-enhanced Raman spectroscopy (SERS) can further enhance its detection sensitivity. In combination with droplet microfluidics, some significant but insurmountable limitations of SERS and Raman spectroscopy can be overcome to some extent, thus improving their detection capability and extending their application. During the past decade, these systems have constantly developed and demonstrated a great potential in more applications, but there is no new review systematically summarizing the droplet microfluidics-based Raman and SERS analysis system since the first related review was published in 2011. Thus, there is a great need for a new review to summarize the advances. In this review, we focus on droplet microfluidics-based Raman and SERS analysis, and summarize two mainstream research directions on this topic up to now. The one is SERS or Raman detection in the moving droplet microreactors, including analysis of molecules, single cells and chemical reaction processes. The other one is SERS active microparticle fabrication via microfluidic droplet templates covering polymer matrix and photonic crystal microparticles. We also comment on the advantages, disadvantage and correlation resolution of droplet microfluidics for SERS or Raman. Finally, we summarize these systems and illustrate our perspectives for future research directions in this field.

Computer simulation of submicron fluid flows in microfluidic chips and their applications in food analysis

In recent years, countries around the world have maintained a zero-tolerance attitude toward safety problems in the food industry. In order to ensure human health, a fast, sensitive, and high-throughput analysis of food contaminants is necessary to ensure safe food products on the market. Microfluidics, as a high-efficiency and sensitive detection technology, has many advantages in the detection of food contaminants, including foodborne pathogens, pesticides, heavy metal ions, toxic substances, and so forth, especially in conjunction with a variety of submicron fluid driving methods, making food detection and analysis more efficient and accurate. This review introduces the principle of submicron fluid driving modes and discusses the driving simulation of submicron fluid in microfluidic chips. In addition, the latest developments in the application of simulation in food analysis from 2006 to 2020 are discussed, and the computer simulation of submicron fluid flow in microfluidic chips and its application and development trend in food analysis are also highlighted. The review indicates that microfluidic technology, using numerical simulation as an auxiliary tool, combined with traditional methods has greatly improved the detection and analysis of food products. In addition, microfluidics combined with a variety of control methods embodies the ability of specific, multifunctional, and sensitive detection and analysis of food products. The development of high-sensitivity, high-throughput, portable, integrated microfluidic chips will enable the technology to be applied in practice.

Preventing Memory Effects in Surface-Enhanced Raman Scattering Substrates by Polymer Coating and Laser-Activated Deprotection

The development of continuous monitoring systems requires in situ sensors that are capable of screening multiple chemical species and providing real-time information. Such in situ measurements, in which the sample is analyzed at the point of interest, are hindered by underlying problems derived from the recording of successive measurements within complex environments. In this context, surface-enhanced Raman scattering (SERS) spectroscopy appears as a noninvasive technology with the ability of identifying low concentrations of chemical species as well as resolving dynamic processes under different conditions. To this aim, the technique requires the use of a plasmonic substrate, typically made of nanostructured metals such as gold or silver, to enhance the Raman signal of adsorbed molecules (the analyte). However, a common source of uncertainty in real-time SERS measurements originates from the irreversible adsorption of (analyte) molecules onto the plasmonic substrate, which may interfere in subsequent measurements. This so-called "SERS memory effect" leads to measurements that do not accurately reflect varying conditions of the sample over time. We introduce herein the design of plasmonic substrates involving a nonpermeable poly(lactic-co-glycolic acid) (PLGA) thin layer on top of the plasmonic nanostructure, toward controlling the adsorption of molecules at different times. The polymeric layer can be locally degraded by irradiation with the same laser used for SERS measurements (albeit at a higher fluence), thereby creating a micrometer-sized window on the plasmonic substrate available to molecules present in solution at a selected measurement time. Using SERS substrates coated with such thermolabile polymer layers, we demonstrate the possibility of performing over 10,000 consecutive measurements per substrate as well as accurate continuous monitoring of analytes in microfluidic channels and biological systems.

Recent progress of microfluidics in surface-enhanced Raman spectroscopic analysis

Surface-enhanced Raman spectroscopy is a significant analytical tool capable of fingerprint identification of molecule in a rapid and ultrasensitive manner. However, it is still hard to meet the requirements of practical sample analysis. The introduction of microfluidics can effectively enhance the performance of surface-enhanced Raman spectroscopy in complex sample analysis including reproducibility, selectivity, sensitivity, and speed. This review summarizes the recent progress of microfluidics in surface-enhanced Raman spectroscopic analysis through four combination approaches. First, microfluidic synthetic techniques offer uniform nano-/microparticle fabrication approaches for reproductive surface-enhanced Raman spectroscopic analysis. Second, the integration of microchip and surface-enhanced Raman spectroscopic substrate provides advanced devices for sensitive and efficient detection. Third, microfluidic sample preparations enable rapid separation and preconcentration of analyte prior to surface-enhanced Raman spectroscopic detection. Fourth, highly integrated microfluidic devices can be employed to realize multistep surface-enhanced Raman spectroscopic analysis containing material fabrication, sample preparation, and detection processes. Furthermore, the challenges and outlooks of the application of microfluidics in surface-enhanced Raman spectroscopic analysis are discussed.

Microfluidics-Based On-Demand Generation of Nonwoven and Single Polymer Microfibers

In this work, we present a microfluidics-based microfiber fabrication method with the ability to control both the fiber size and the extent of coiling of the generated fiber. This latter feature allows on-demand generation of both nonwoven and single fiber within the same device, broadening the scope of application of the fabricated fibers. Using a hybrid poly(dimethylsiloxane) (PDMS)-glass microfluidic device, we implement a coflowing solvent removal technique to generate poly(ethylene oxide) (PEO) fibers. Characterization of fibers by Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) confirms the production of solvent-free, pure PEO fibers. Control over fiber size using both inner and outer liquid flow rates is demonstrated by scanning electron microscopy (SEM) imaging. More crucially, we employ a complementary flow toward the downstream end of the fiber solidification region to control the extent of coiling of the generated fiber. By simple variation of the complementary flow, we induce a transition from a nonwoven fiber to a single fiber. The presented technique is expected to broaden the scope of microfluidics as a tool for the continuous generation of microfibers with a wider range of applications than the existing microfluidics techniques.

Combining microextraction methods with surface-enhanced Raman spectroscopy towards more selective and sensitive analyte detection by plasmonic metal nanoparticles

Raman signals of analytes can be enhanced on the surface of noble nanoparticles by generating SERS signals, which can be further enhanced using microextraction (ME) techniques.

Electrostatic Self-Assembly of Ti3C2Tx MXene and Gold Nanorods as an Efficient Surface-Enhanced Raman Scattering Platform for Reliable and High-Sensitivity Determination of Organic Pollutants

A reliable surface-enhanced Raman scattering (SERS) substrate composed of two-dimensional (2D) MXene (Ti₃C₂T_x) nanosheets and gold nanorods (AuNRs) is designed and fabricated for sensitive detection of organic pollutants. The AuNRs are uniformly distributed on the surface of the 2D MXene nanosheets because of the strong electrostatic interactions, forming abundant SERS hot spots. The MXene/AuNR SERS substrate exhibits high sensitivity and excellent reproducibility in the determination of common organic dyes such as rhodamine 6G, crystal violet, and malachite green. The detection limits are 1 × 10^-12, 1 × 10^-12, and 1 × 10^-10 M, and relative standard deviations determined from 13 areas on each sample are 18.1, 10.1, and 15.6%, respectively. In the determination of more complex organic pesticides and pollutants, the substrate also shows excellent sensitivity and quantitative detection, and the detection limits for thiram and diquat of 1 × 10^-10 and 1 × 10^-8 M, respectively, are much lower than the contaminant levels stipulated by the US Environmental Protection Agency. The MXene/AuNR composite constitutes an efficient SERS platform for reliable and high-sensitivity environmental analysis and food safety monitoring.

Molecular Specific and Sensitive Detection of Pyrazinamide and Its Metabolite Pyrazinoic Acid by Means of Surface Enhanced Raman Spectroscopy Employing In Situ Prepared Colloids

The prodrug pyrazinamide (PZA) is metabolized by the mycobacteria to pyrazinoic acid (POA), which is expelled into the extracellular environment. PZA resistance is highly associated to a lack of POA efflux. Thus, by detecting a reduction of the concentration of POA in the extracellular environment, by means of lab-on-a-chip (LoC)-SERS (surface-enhanced Raman spectroscopy), an alternative approach for the discrimination of PZA resistant mycobacteria is introduced. A droplet-based microfluidic SERS device has been employed to illustrate the potential of the LoC-SERS method for the discrimination of PZA resistant mycobacteria. The two analytes were detected discretely in aqueous solution with a limit of detection of 27 µm for PZA and 21 µm for POA. The simultaneous detection of PZA and POA in aqueous mixtures could be realized within a concentration range from 20 μm to 50 μm for PZA and from 50 μm to 80 μm for POA.

Transient bioelectrical devices inspired by a silkworm moth breaking out of its cocoon

Transient devices have attracted extensive interest because they allow changes in physical form and device function under the control of external stimuli or related commands and have very broad application prospects for information security, biomedical care and the environment. Transient bioelectrical devices were fabricated inspired by a silkworm moth breaking out of its cocoon, which has shown many advantages, including the use of mild stimulation, biocompatible materials, a simple process, and a universal strategy. For the fabrication of the transient devices, heat-sensitive microspheres with a 9.3 mol L⁻¹ LiBr solution in wax shells were prepared by microfluidic technology, which were then assembled into silk fibroin (SF) electronic materials/devices, such as SF conductive film, an LED circuit on SF film, and a Ag/SF film/Pt/SF film memristor. The contribution from the LiBr/wax microspheres to the transient time of the SF films upon exposure to heat was quantitatively investigated. This approach was applied to transiently dissolve a flexible Ag-nanowire resistance circuit line on a SF substrate. Moreover, memristors constructed with a functional layer of SF were destroyed by melting the LiBr/wax microspheres. This technique paves the way for realizing transient bioelectrical devices inspired by biological behavior, which have been well optimized by nature via evolution.

Silk fibroin-based transient devices were developed using LiBr/wax microspheres that mimic a silk cocoon protecting silkworm pupa and a juvenile moth secreting an enzyme to dissolve silk sericin and break a silk cocoon.

Microfluidic assisted synthesis of PLGA drug delivery systems

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS). In this context, there is an emerging need for a rapid, reliable and reproducible method of synthesis. Here, microfluidic systems provide great opportunities for synthesizing carriers in a tightly controlled manner and with low consumption of materials, energy and time. These miniature devices have been the focus of recent research since they can address the challenges inherent to the bulk system, e.g. low drug loading efficiency and encapsulation, broad size distribution and burst initial release. In this article, we provide an overview of current microfluidic systems used in drug delivery production, with a special focus on PLGA-based DDS. In this context, we highlight the advantages associated with the use of microchip systems in the fabrication of nanoparticles (NPs) and microparticles (MPs), e.g. in achieving complex morphologies. Furthermore, we discuss the challenges for selecting proper microfluidics for targeted DDS production in a translational setting and introduce strategies that are used to overcome microfluidics shortcomings, like low throughput for production.

Poly(lactic-co-glycolic acid) (PLGA) is a biocompatible and biodegradable polymer that recently attracted attention for use as part of drug delivery systems (DDS).

Inline integration of offset MMF-capillary-MMF structure as a portable and compact fiber-optic surface-enhanced Raman scattering microfluidic chip

A novel fiber-optic surface-enhanced Raman scattering (SERS) microfluidic chip integrated with an embedded Raman probe is presented and demonstrated. The Raman probe consists of the offset-multimode-fiber (MMF)-capillary-MMF (OMCM) structure and SERS substrate. The probe is embedded in the microfluidic channel to form a compact and portable chip. The chip is employed with a fiber coupler in an all-fiber detection system, which has a good stability compared to the free space focusing by the conventional confocal Raman microscope. The excitation light transmits from both ends of the OMCM probe into the capillary, and the generated Raman scattered signals are collected by two MMFs simultaneously. Experimental results of the Rhodamine 6G (R6G) detection show that the Raman signal intensity increases in a linear pattern at ∼1509  cm^-1 with the increase of R6G concentrations. This kind of chip is compact, integrated, and miniaturized for the Raman signal detection. Furthermore, it can be fabricated easily in large quantities at cost, rendering promising applications.

Surface-Enhanced Raman Scattering Spectroscopy and Microfluidics: Towards Ultrasensitive Label-Free Sensing

Raman scattering and surface-enhanced Raman scattering (SERS) spectroscopy have demonstrated their potential as ultrasensitive detection techniques in the past decades. Specifically, and as a result of the flourishing of nanotechnology, SERS is nowadays one of the most powerful sensing techniques, not only because of the low detection limits that it can achieve, but also for the structural information that it offers and its capability of multiplexing. Similarly, microfluidics technology is having an increased presence not only in fundamental research, but also in the industry. The latter is because of the intrinsic characteristics of microfluidics, being automation, high-throughput, and miniaturization. However, despite miniaturization being an advantage, it comes together with the need to use ultrasensitive techniques for the interrogation of events happening in extremely small volumes. The combination of SERS with microfluidics can overcome bottlenecks present in both technologies. As a consequence, the integration of Raman and SERS in microfluidics is being investigated for the label-free biosensing of relevant research challenges.

Tuning plasmons layer-by-layer for quantitative colloidal sensing with surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is well known for its high sensitivity that emerges due to the plasmonic enhancement of electric fields typically on gold and silver nanostructures. However, difficulties associated with the preparation of nanostructured substrates with uniform and reproducible features limit reliability and quantitation using SERS measurements. In this work we use layer-by-layer (LbL) self-assembly to incorporate multiple functional building blocks of collaborative assemblies of nanoparticles on colloidal spheres to fabricate SERS sensors. Gold nanoparticles (AuNPs) are packaged in discrete layers, effectively 'freezing nano-gaps', on spherical colloidal cores to achieve multifunctionality and reproducible sensing. Coupling between layers tunes the plasmon resonance for optimum SERS signal generation to achieve a 10 nM limit of detection. Significantly, using the layer-by-layer construction, SERS-active AuNP layers are spaced out and thus optically isolated. This uniquely allows the creation of an internal standard within each colloidal sensor to enable highly reproducible self-calibrated sensing. By using 4-mercaptobenzoic acid (4-MBA) as the internal standard adenine concentrations are quantified to an accuracy of 92.6-99.5%. Our versatile approach paves the way for rationally designed yet quantitative colloidal SERS sensors and their use in a variety of sensing applications.

Surface-enhanced Raman spectroscopy and microfluidic platforms: challenges, solutions and potential applications

The review provides an overview of the development in the field of surface-enhanced Raman spectroscopy combined with microfluidic platforms.

Analytical characterization using surface-enhanced Raman scattering (SERS) and microfluidic sampling

With the rapid development of analytical techniques, it has become much easier to detect chemical and biological analytes, even at very low detection limits. In recent years, techniques based on vibrational spectroscopy, such as surface enhanced Raman spectroscopy (SERS), have been developed for non-destructive detection of pathogenic microorganisms. SERS is a highly sensitive analytical tool that can be used to characterize chemical and biological analytes interacting with SERS-active substrates. However, it has always been a challenge to obtain consistent and reproducible SERS spectroscopic results at complicated experimental conditions. Microfluidics, a tool for highly precise manipulation of small volume liquid samples, can be used to overcome the major drawbacks of SERS-based techniques. High reproducibility of SERS measurement could be obtained in continuous flow generated inside microfluidic devices. This article provides a thorough review of the principles, concepts and methods of SERS-microfluidic platforms, and the applications of such platforms in trace analysis of chemical and biological analytes.