Liquid-phase growth of platinum nanoparticles on molybdenum trioxide nanosheets: an enhanced catalyst with intrinsic peroxidase-like catalytic activity

Zirconium-porphyrin-MOF-based oxidase-like nanozyme with oxygen vacancy for aflatoxin B1 colorimetric sensing

In this study, a porous coordination network zirconium-porphyrin-based nanoparticle with oxygen vacancies (OVs) was prepared using acetic acid and benzoic acid as modulators via a simple hydrothermal method. The presence of OVs was confirmed by various characterization methods and was found to enhance oxygen uptake and activation. This resulted in the generation of more reactive peroxyl radicals (•O2 -) and led to an improved oxidase (OXD) mimetic activity. Additionally, it promoted 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) oxidation, with a low Km value of 0.07 mM and a high Vmax of 1.47 × 10-7 M·s-1. As aflatoxin B1 (AFB1) inhibits the Pt@PCN-222-ABTS nanozyme system, a colorimetric probe for AFB1 detection was constructed. The limit of detection (LOD) was 0.074 µg·L-1. This research presents a novel approach for designing a nanozymatic-based colorimetric method to analyze trace AFB1 residues in food.

A Homogeneous Colorimetric Strategy Based on Rose-like CuS@Prussian Blue/Pt for Detection of Dopamine

The development of effective methods for dopamine detection is critical. In this study, a homogeneous colorimetric strategy for the detection of dopamine based on a copper sulfide and Prussian blue/platinum (CuS@PB/Pt) composite was developed. A rose-like CuS@PB/Pt composite was synthesized for the first time, and it was discovered that when hydrogen peroxide was present, the 3,3',5,5'-tetramethylbenzidine (TMB) changed from colorless into blue-oxidized TMB. The CuS@PB/Pt composite was characterized with a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and an X-ray photoelectron spectrometer (XPS). Moreover, the catalytic activity of the CuS@PB/Pt composite was inhibited by the binding of dopamine to the composite. The color change of TMB can be evaluated by the UV spectrum and a portable smartphone detection device. The developed colorimetric sensor can be used to quantitatively analyze dopamine between 1 and 60 µM with a detection limit of 0.28 μM. Furthermore, the sensor showed good long-term stability and good performance in human serum samples. Compared with other reported methods, this strategy can be performed rapidly (16 min) and has the advantage of smartphone visual detection. The portable smartphone detection device is portable and user-friendly, providing convenient colorimetric analysis for serum. This colorimetric strategy also has considerable potential for the development of in vitro diagnosis methods in combination with other test strips.

A sensitive colori/fluorimetric nanoprobe for detection of polyphenols using peroxidase-mimic plasma-modified MoO3 nanoparticles

Herein, MoO₃ nanoparticles were synthesized and modified using Argon cold plasma treatment (Ar-MoO₃NPs) for the first time. Various characterization studies were performed using various methods, including SEM, XRD, and FTIR techniques. The catalytic activity of MoO₃NPs before and after modification was investigated using fluorometric and colorimetric experiments. The results indicated that the enzyme-mimic activity of MoO₃NPs increased after plasma-surface modification (1.5 fold). Also, a fluorometric method based on the oxidation of a non-fluorescent terephthalic acid by Ar-MoO₃NPs in the presence of H₂O₂ and the production of a compound with a high emission was designed for polyphenols detection. Quercetin was used as a polyphenol standard for the optimization of the proposed system. Under the optimum conditions, the dynamic ranges of the calibration graphs and the detection limits were calculated for different polyphenols (μmol/L): quercetin (2-232, 12.22), resveratrol (2-270, 61.89), curcumin (39-400, 38.89), gallic acid (2-309, 21.5) and ellagic acid (39-309, 16.25). Also, the precision of the method, which was expressed as RSD%, was in the range of 0.286-1.19%. The proposed system could detect individual polyphenols and total polyphenols in three different fruit extracts (apple, orange, and grapes) with high sensitivity. The obtained total concentrations of polyphenols in real samples were comparable to those calculated by the spectrophotometric method. So, a novel and sensitive optical nanosensor for the detection of polyphenols was reported as an alternative to the routine Folin-Ciocalteu spectrophotometric technique.

2D material-based peroxidase-mimicking nanozymes: catalytic mechanisms and bioapplications

The boom in nanotechnology brings new insights into the development of artificial enzymes (nanozymes) with ease of modification, lower manufacturing cost, and higher catalytic stability than natural enzymes. Among various nanomaterials, two-dimensional (2D) nanomaterials exhibit promising enzyme-like properties for a plethora of bioapplications owing to their unique physicochemical characteristics of tuneable composition, ultrathin thickness, and huge specific surface area. Herein, we review the recent advances in several 2D material-based nanozymes, such as carbonaceous nanosheets, metal-organic frameworks (MOFs), transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), and transition metal oxides (TMOs), clarify the mechanisms of peroxidase (POD)-mimicking catalytic behaviors, and overview the potential bioapplications of 2D nanozymes.

A versatile nanoplatform based on multivariate porphyrinic metal-organic frameworks for catalytic cascade-enhanced photodynamic therapy

In recent years, the antitumor application of photodynamic therapy (PDT) has gained widespread interest in treating solid tumors. Due to the hypoxic environment in tumors, the major limit of PDT seems to be the source of oxygen. In this work, we attempted to relieve hypoxia and enhance photodynamic therapy, and therefore, designed and assembled a catalytic cascade-enhanced PDT multifunctional nanoplatform. The mentioned platform termed UIO@Ca-Pt is based on porphyrinic metal-organic framework (UIO) combination, which is simultaneously loaded by CaO2 NPs with polydopamine (PDA) and then the Pt raw material to further improve biocompatibility and efficiency. In a tumor microenvironment, CaO2 could react with water to generate calcium hydroxide and hydrogen peroxide, which was further decomposed by Pt nanoparticles to form oxygen, thereby facilitating the generation of cytotoxic singlet oxygen by photosensitizer TCPP under laser irradiation. Both in vitro and in vivo experiment results confirmed the excellent oxygen production capacity and enhanced PDT effect of UIO@Ca-Pt. With guaranteed safety in PDT, the oxygen-supplying strategy might stimulate considerable interest in the development of various metal-organic materials with multifunctionality for tumor diagnosis and therapy.

One-pot bottom-up synthesis of a 2D graphene derivative: application in biomolecular recognition and nanozyme activity

The synthesis of two-dimensional (2D) nanosheets such as graphene and its derivatives through a bottom-up approach has many advantages such as growth control and functionalization, but it is always challenging to get the desired material. Herein, we have reported the synthesis of water soluble 2D-nanosheets through a bottom-up approach from 2,4,6-tribromo-3-hydroxybenzoic acid via a self-coupling pathway and characterized them using several techniques. AFM and TEM analyses reveal that the synthesized material has a layered structure with a thickness of ∼1.2 nm. Also, the prepared nanosheets are amorphous in nature with high negative charge (-38 ± 2.5 mV). The flexible nature of 2D-nanosheets and their functionality can be used in many related applications. Therefore, we have utilized the synthesized 2D-nanosheets in biomolecular recognition studies. It was found that the enzymatic activity of α-chymotrypsin can be controlled reversibly in the presence of the synthesized 2D-nanosheets. The kinetic study revealed that the nanosheet surface selectively binds to the active sites of the enzyme through a competitive pathway. Furthermore, we explored the nanozyme activity of the material in a peroxidase-like activity assay of two bio-active molecules: Nicotinamide Adenine Dinucleotide Phosphate (NADH) and dopamine. The results suggest that the prepared material efficiently catalyzed the oxidation of NADH to biological cofactor NAD⁺ and dopamine to aminochrome in the presence of H₂O₂. These synthesized graphene-like 2D-nanosheets with functional groups can be further tuned with other functionalities, which can open a new window for other related applications.

Pt Nanoparticles Anchored on NH2-MIL-101 with Efficient Peroxidase-Like Activity for Colorimetric Detection of Dopamine

Dopamine (DA) is an important catecholamine neurotransmitter that plays a highly relevant role in regulating the central nervous system, and abnormal DA content can cause many immune-related diseases. Hence, it is of significance to sensitively and specifically identify DA for clinical medicine. In this work, Pt/NH2-MIL-101 hybrid nanozymes with bimetallic catalytic centers were fabricated by forming coordinate bonds between Pt nanoparticles (Pt NPs) and –NH2 on metal–organic frameworks (MOF). The catalytic activity of Pt/NH2-MIL-101 was increased by 1.5 times via enlarging the exposure of more active sites and improving the activity of the active sites through the strategy of forming bimetallic catalytic centers. In the presence of DA, competing with 3, 3′, 5, 5′-tetramethylbenzidine (TMB) for the generated hydroxyl radicals (•OH), the blue oxidation state TMB (Ox-TMB) is reduced to colorless TMB, showing dramatic color changes. The Pt/NH2-MIL-101-based colorimetric assay enables the sensitive and robust detection of DA molecules with a detection limit of only 0.42 μM and has an observable potential in clinical applications.

Recent Advances in Transition Metal Dichalcogenide Cathode Materials for Aqueous Rechargeable Multivalent Metal-Ion Batteries

The generation of renewable energy is a promising solution to counter the rapid increase in energy consumption. Nevertheless, the availability of renewable resources (e.g., wind, solar, and tidal) is non-continuous and temporary in nature, posing new demands for the production of next-generation large-scale energy storage devices. Because of their low cost, highly abundant raw materials, high safety, and environmental friendliness, aqueous rechargeable multivalent metal-ion batteries (AMMIBs) have recently garnered immense attention. However, several challenges hamper the development of AMMIBs, including their narrow electrochemical stability, poor ion diffusion kinetics, and electrode instability. Transition metal dichalcogenides (TMDs) have been extensively investigated for applications in energy storage devices because of their distinct chemical and physical properties. The wide interlayer distance of layered TMDs is an appealing property for ion diffusion and intercalation. This review focuses on the most recent advances in TMDs as cathode materials for aqueous rechargeable batteries based on multivalent charge carriers (Zn2+, Mg2+, and Al3+). Through this review, the key aspects of TMD materials for high-performance AMMIBs are highlighted. Furthermore, additional suggestions and strategies for the development of improved TMDs are discussed to inspire new research directions.

Electrochemical Detection of Glucose Molecules Using Laser-Induced Graphene Sensors: A Review

This paper deals with recent progress in the use of laser-induced graphene sensors for the electrochemical detection of glucose molecules. The exponential increase in the exploitation of the laser induction technique to generate porous graphene from polymeric and other naturally occurring materials has provided a podium for researchers to fabricate flexible sensors with high dynamicity. These sensors have been employed largely for electrochemical applications due to their distinct advantages like high customization in their structural dimensions, enhanced characteristics and easy roll-to-roll production. These laser-induced graphene (LIG)-based sensors have been employed for a wide range of sensorial applications, including detection of ions at varying concentrations. Among the many pivotal electrochemical uses in the biomedical sector, the use of these prototypes to monitor the concentration of glucose molecules is constantly increasing due to the essentiality of the presence of these molecules at specific concentrations in the human body. This paper shows a categorical classification of the various uses of these sensors based on the type of materials involved in the fabrication of sensors. The first category constitutes examples where the electrodes have been functionalized with various forms of copper and other types of metallic nanomaterials. The second category includes other miscellaneous forms where the use of both pure and composite forms of LIG-based sensors has been shown. Finally, the paper concludes with some of the possible measures that can be taken to enhance the use of this technique to generate optimized sensing prototypes for a wider range of applications.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

The excellent peroxidase-like activity of uniform CuCo2O4 microspheres with oxygen vacancy for fast sensing of hydrogen peroxide and ascorbic acid

The uniform CuCo₂O₄ microspheres with oxygen vacancy were firstly found to possess excellent peroxidase-like activity which is essential for constructing a rapid and facile colorimetric sensor to determine H₂O₂ and interrelated biomolecules.

Revealing Sintering Kinetics of MoS2-Supported Metal Nanocatalysts in Atmospheric Gas Environments via Operando Transmission Electron Microscopy

The decoration of two-dimensional (2D) substrates with nanoparticles (NPs) serve as heterostructures for various catalysis applications. Deep understanding of catalyst degradation mechanisms during service conditions is crucial to improve the catalyst durability. Herein, we studied the sintering behavior of Pt and bimetallic Au-core Pt-shell (Au@Pt core-shell) NPs on MoS₂ supports at high temperatures under vacuum, nitrogen (N₂), hydrogen (H₂), and air environments by in situ gas-cell transmission electron microscopy (TEM). The key observations are summarized as effect of environment: while particle migration and coalescence (PMC) was the main mechanism that led to Pt and Au@Pt NPs degradation under vacuum, N₂, and H₂ environments, the degradation of MoS₂ substrate was prominent under exposure to air at high temperatures. Pt NPs were less stable in H₂ environment when compared with the Pt NPs under vacuum or N₂, due to Pt-H interactions that weakened the adhesion of Pt on MoS₂. Effect of NP composition: under H₂, the stability of Au@Pt NPs was higher in comparison to Pt NPs. This is because H₂ promotes the alloying of Pt-Au, thus reducing the number of Pt at the surface (reducing H₂ interactions) and increasing Pt atoms in contact with MoS₂. Effect of NP size: The alloying effect promoted by H₂ was more pronounced in small size Au@Pt NPs resulting in their higher sintering resistance in comparison to large size Au@Pt NPs and similar size Pt NPs. The present work provides key insights into the parameters affecting the catalyst degradation mechanisms on 2D supports.

Ultra-small and biocompatible platinum nanoclusters with peroxidase-like activity for facile glucose detection in real samples

The highly sensitive glucose detection based on the peroxidase-like properties of nanoclusters has been gained great interest. In this work, Pericarpium Citri Reticulatae polysaccharide (PCRP) stabilized platinum nanoclusters (Pt-PCRP NCs) were prepared by a green method in which potassium tetrachloroplatinate and PCRP were simply mixed without addition of other agents. Platinum nanoclusters (Pt NCs) had ultra-small size of 1.26 ± 0.34 nm. The hydrodynamic size of Pt-PCRP NCs was 29.7 nm, and zeta potential of which was -12.0 mV. Pt-PCRP NCs showed high biocompatibility toward HeLa cells and red blood cells. In addition, Pt-PCRP NCs catalyzed the decomposition of H₂O₂ to produce •OH, which further oxidized colorless 3,3'5,5'-tetramethylbenzidine (TMB) to blue oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB), exhibiting peroxidase-like property. The kinetics followed the Michaelis-Menten equation. More importantly, the colorimetric method for glucose detection using Pt-PCRP NCs had high selectivity and low detection limit for 0.38 μM. The established method based on Pt-PCRP NCs was used to precisely detect glucose detection in human serum, saliva, and sweat. Taken together, the prepared ultra-small and biocompatible Pt-PCRP NCs have good potential glucose applications in clinical diagnosis in the future.

Colorimetric detection of serum doxycycline with d-histidine-functionalized gold nanoclusters as nanozymes

An assay for selective detection of DC was developed due to the nanozymatic activity of d-His@AuNCs inhibited by Cu²⁺ and restored by DC.

Functionalized Hybridization of 2D Nanomaterials

The discovery of graphene and subsequent verification of its unique properties have aroused great research interest to exploit diversified graphene-analogous 2D nanomaterials with fascinating physicochemical properties. Through either physical or chemical doping, linkage, adsorption, and hybridization with other functional species into or onto them, more novel/improved properties are readily created to extend/expand their functionalities and further achieve great performance. Here, various functionalized hybridizations by using different types of 2D nanomaterials are overviewed systematically with emphasis on their interaction formats (e.g., in-plane or inter plane), synergistic properties, and enhanced applications. As the most intensely investigated 2D materials in the post-graphene era, transition metal dichalcogenide nanosheets are comprehensively investigated through their element doping, physical/chemical functionalization, and nanohybridization. Meanwhile, representative hybrids with more types of nanosheets are also presented to understand their unique surface structures and address the special requirements for better applications. More excitingly, the van der Waals heterostructures of diverse 2D materials are specifically summarized to add more functionality or flexibility into 2D material systems. Finally, the current research status and faced challenges are discussed properly and several perspectives are elaborately given to accelerate the rational fabrication of varied and talented 2D hybrids.

Challenges and recent advancements of functionalization of two-dimensional nanostructured molybdenum trioxide and dichalcogenides

Atomically thin two-dimensional (2D) semiconductors are the thinnest functional semiconducting materials available today. Among them, both molybdenum trioxide and chalcogenides (MT&Ds) represent key components within the family of different 2D semiconductors for various electronic, optoelectronic and electrochemical applications due to their unique electronic, optical, mechanical and electrochemical properties. However, despite great progress in research dedicated to the development and fabrication of 2D MT&Ds observed within the last decade, there are significant challenges that affected their charge transport behavior and fabrication on a large scale as well as there is high dependence of the carrier mobility on the thickness. In this article, we review the recent progress in the carrier mobility engineering of 2D MT&Ds and elaborate devised strategies dedicated to the optimization of MT&D properties. Specifically, the latest physical and chemical methods towards the surface functionalization and optimization of the major factors influencing the extrinsic transport at the electrode-2D semiconductor interface are discussed.

Catalytic Mechanisms of Nanozymes and Their Applications in Biomedicine

The research on nanozymes has increased dramatically in recent years and a new interdiscipline, nanozymology, has emerged. A variety of nanomaterials have been designed to mimic the characteristics of natural enzymes, which connects an important bridge between nanotechnology and biological science. Unlike natural enzymes, the nanoscale properties of nanozymes endow them with the potential to regulate their enzymatic-like activity from different perspectives. The mechanisms behind those methods are intriguing. In this Review, we introduce these mechanisms from the aspects of surface chemistry, surface modification, molecular imprinting, and hybridization and then focus attention on some specific catalytic mechanisms of several representative nanozymes. The applications of nanozymes ranging from bioassay, imaging, to disease therapy are also discussed in detail to prove the fact that the inherent physicochemical properties of nanomaterials not only make nanozymes the analogues of biological enzymes, but also endow them with incomparable advantages and broad prospects in biomedical fields. Finally, four characteristics and some challenges of nanozymes are summarized.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

MoS2 nanosheet mediated ZnO–g-C3N4 nanocomposite as a peroxidase mimic: catalytic activity and application in the colorimetric determination of Hg(ii)

A novel colorimetric sensing platform using the peroxidase mimicking activity of ternary MoS₂-loaded ZnO–g-C₃N₄ nanocomposites (ZnO–g-C₃N₄/MoS₂) has been developed for the determination of Hg(ii) ions over co-existing metal ions. The nanocomposite was prepared using an exfoliation process, and the product was further characterized using SEM, TEM, XRD and FTIR analysis. The ZnO–g-C₃N₄/MoS₂ possesses excellent intrinsic catalytic activity to induce the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in aqueous solution in the presence of H₂O₂ to generate deep blue coloured cation radicals (TMB⁺) which can be viewed with the naked eye and produce absorbance at a wavelength of 652 nm. The addition of a well known bioradical scavenger, glutathione (GSH), to the solution hinders the generation of cation radicals and turns the solution colourless. The introduction of Hg(ii) to this solution brings the blue colour back into it, due to the strong affinity of the thiol in the GSH. Based on this mechanism, we have developed a simple and rapid colorimetric sensor for the highly sensitive and selective detection of Hg(ii) ions in aqueous solution with a low detection limit of 1.9 nM. Furthermore, the prepared colorimetric sensor was effectively applied for the quantification analysis of real water samples.

A novel colorimetric sensing platform using the peroxidase mimicking activity of ternary MoS₂-loaded ZnO–g-C₃N₄ nanocomposites (ZnO–g-C₃N₄/MoS₂) has been developed for the determination of Hg(ii) ions over co-existing metal ions.

Fluoride capped V6O13–reduced graphene oxide nanocomposites: high activity oxidase mimetics and mechanism investigation

A novel high activity of the oxidase-like nanozyme of V₆O₁₃–rGO NCs, whose activity can be significantly enhanced by fluoride capping through surface chemistry.

Methylene Blue-Fortified Molybdenum Trioxide Nanoparticles: Harnessing Radical Scavenging Property

A hybrid nanosystem with impeccable cellular imaging and antioxidant functionality is demonstrated. The microwave irradiation-derived molybdenum trioxide nanoparticles (MoO₃ NPs) were surface-functionalized with the cationic dye molecule, methylene blue (MB), which enables superior UV-visible absorbance and fluorescence emission wavelengths potential for bioimaging. The radical scavenging property of the pristine MoO₃ NPs and MoO₃-MB NPs were studied in vivo using Caenorhabditis elegans as the model system. Heat shock-induced oxidative stress in C. elegans was significantly resolved by the MoO₃-MB NPs, in agreement with the in vitro radical scavenging study by electron paramagnetic resonance spectroscopy. Hybrid nanostructures of MoO₃-MB demonstrate synergistic benefits in intracellular imaging with intrinsic biocompatibility and antioxidant behavior, which can facilitate application as advanced healthcare materials toward bioimaging and clinical therapeutics.

Competing Roles of Crystallization and Degradation of a Metal-Organic Chalcogenolate Assembly under Biphasic Solvothermal Conditions

Metal-organic chalcogenolate assemblies have attracted recent interest as ensemble nanomaterials that contain one- or two-dimensional inorganic nanostructures in a periodic array with supramolecular isolation provided by an associated organic ligand lattice. Biphasic immiscible synthesis at liquid-liquid interfaces is a convenient way to grow crystalline d¹⁰ metal-organic chalcogenolate assemblies. However, there has been little systematic study of the role of temperature on the nucleation, growth, and stability of hybrid chalcogenolates during biphasic synthesis. Silver benzeneselenolate, a robustly blue-luminescent, lamellar metal-organic chalcogenolate assembly, was crystallized at biphasic immiscible liquid-liquid interfaces under solvothermal conditions. A positive correlation between temperature and nucleation density was observed, and the luminescence was conserved in all examples of the crystalline phase. Applying solvothermal conditions to the biphasic synthesis generally increased the lateral dimensions of the crystals and strongly favored the crystalline phase of the compound. Although thin, well-formed crystals were observed within 1 h for interfacial reactions performed at high temperatures, degradation was observed in long duration growths resulting in aggregated silver metal. A study of the thermal stability of the material via thermogravimetric analysis revealed that the decomposition is likely a redox reaction reverting the compound to silver metal and diphenyl diselenide. In situ analysis of this degradation was performed by grazing-incidence wide-angle X-ray scattering, which confirmed that the decomposition occurs in a single step with no preceding changes to the structure of the material. This work demonstrates that biphasic solvothermal methods are amenable to the synthesis of hybrid metal-organic chalcogenolate assemblies and that temperature can be used to control product morphology and lateral crystal growth at the immiscible interface.

Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Nano Molybdenum trioxide (α-MoO₃) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO₃ nanoparticles after adsorption and regeneration. The α-MoO₃ nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Solution-Phase Synthesis of Platinum Nanoparticle-Decorated Metal-Organic Framework Hybrid Nanomaterials as Biomimetic Nanoenzymes for Biosensing Applications

The synthesis of nanomaterials with specific properties and functions as biomimetic nanoenzymes has attracted extensive attention in the past decades due to their great potential to substitute natural enzymes. Herein, a facile and simple method for the preparation of platinum nanoparticle (PtNP)-decorated two-dimensional metal-organic framework (MOF) nanocomposites was developed. A ligand with heme-like structure, Fe(III) tetra(4-carboxyphenyl)porphine chloride (TCPP(Fe)), was applied to synthesize MOF nanosheets (denoted as Cu-TCPP(Fe) nanosheets) in high yield. Ultrathin Cu-TCPP(Fe) nanosheets with thickness less than 10 nm were used as a novel template for the growth of ultrasmall and uniform PtNPs. Significantly, the obtained hybrid nanomaterials (PtNPs/Cu-TCPP(Fe) hybrid nanosheets) exhibit enhanced peroxidase-like activity compared to PtNPs, Cu-TCPP(Fe) nanosheets, and the physical mixture of both due to the synergistic effect. On account of the excellent peroxidase-like activity of PtNPs/Cu-TCPP(Fe) hybrid nanosheets, we established a colorimetric method for sensitive and rapid detection of hydrogen peroxide. Furthermore, by combining with glucose oxidase, a cascade colorimetric method was established to further detect glucose with excellent sensitivity and selectivity.

A multiple signal amplified colorimetric aptasensor for antibiotics measurement using DNAzyme labeled Fe-MIL-88-Pt as novel peroxidase mimic tags and CSDP target-triggered cycles

An ultrasensitive colorimetric aptasensor was developed for antibiotics detection, with chloramphenicol (CAP) as model target, using DNAzyme labeled Fe-MIL-88-Pt as novel peroxidase mimic signal tags and target-triggered circular strand-displacement polymerization (CSDP) for signal amplification. The system consists of two components which can partially hybridize with each other: one is capture probe which was formed through immobilizing hairpin DNA containing aptamer sequence on magnetic beads (MB-cDNA), another is signal tag which was constructed through labeling single strand DNAzyme (G-quadruplex/Hemin) which can partially hybrid with cDNA on platinum nanoparticles functionalized Fe-MIL-88 (MIL-88-Pt-DNAzyme). All components of MIL-88, Pt and DNAzyme in the tag can act as peroxidase mimic to triply catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ into a blue-colored oxidized TMB (oxTMB) for the colorimetric readout. Thus distinctive signal can be observed by naked eye even in presence of 0.02 nM tags. In the presence of target and primer, cDNA loop can open to form cDNA/CAP intermediates, enabling primer to hybridize with the exposed sequences of the cDNA, which initiated target assisted CSDP recycles. Then numerous signal tags were released into supernatant to catalyze TMB for color development. There was a liner relationship between the absorbance and the concentration of CAP in the range of 0.1 pM (0.0323 pg/mL) to 1000 pM (323 pg/mL) with the detection limit of 0.03 pM (0.0097 pg/mL). The ultra-high sensitivity was ascribed to the multiplex catalytic activities from the tags and CSDP based signal amplification. Furthermore, this method can produce signals being observed by naked eye to facilitate in-situ detection and be further extended to detect other antibiotics in food just by simply replacing cDNA on the sensing system.

Facile Water-Based Strategy for Synthesizing MoO3-x Nanosheets: Efficient Visible Light Photocatalysts for Dye Degradation

Nanostructured molybdenum oxides are promising materials for energy storage, catalysis, and electronic-based applications. Herein, we report the synthesis of MoO_3-x nanosheets (x stands for oxygen vacancy) via an environmentally friendly liquid exfoliation approach. The process involves the reflux of the bulk α-MoO₃ precursor in water at 80 °C for 7 days. Electron microscopy and atomic force microscopy show that the MoO_3-x nanosheets are a few nanometer thick. MoO_3-x nanosheets exhibit near infrared plasmonic property that can be enhanced by visible light irradiation for a short time (10 min). Photocatalytic activity of MoO_3-x nanosheets for organic dye decolorization is examined using two different dyes (rhodamine B and methylene blue). Under visible light irradiation, MoO_3-x nanosheets make a rapid decolorization for the dye molecules in less than 10 min. The simple synthesis procedure of MoO_3-x nanosheets combined with their remarkable photochemical properties reflect the high potential for using the nanosheets in a variety of applications.

Molybdenum oxide quantum dots prepared via a one-step stirring strategy and their application as fluorescent probes for pyrophosphate sensing and efficient antibacterial materials

MoO_x QDs were prepared using a one-step stirring treatment of MoO₃ powder in DMSO. They can be used as efficient fluorescent probes and antibacterial materials.

A negative feedback loop based on proton-driven in situ formation of plasmonic molybdenum oxide nanosheets

A negative feedback loop is developed based on proton-driven in situ formation of plasmonic MoO_3−x nanosheets.

Ag nanoparticle decorated molybdenum oxide structures: growth, characterization, DFT studies and their application to enhanced field emission

We report a simple single step growth of α-MoO₃ structures and energetically suitable site specific Ag nanoparticle (NP) decorated α-MoO₃ structures on varied substrates, having almost similar morphologies and oxygen vacancies. We elucidate possible growth mechanisms in light of experimental findings and density functional theory (DFT) calculations. We experimentally establish and verified by DFT calculations that the MoO₃(010) surface is a weakly interacting and stable surface compared to other orientations. From DFT study, the binding energy is found to be higher for (100) and (001) surfaces (∼-0.98 eV), compared to the (010) surface (∼-0.15 eV) and thus it is likely that Ag NP formation is not favorable on the MoO₃(010) surface. The Ag decorated MoO₃ (Ag-MoO₃) nanostructured sample shows enhanced field emission properties with an approimately 2.1 times lower turn-on voltage of 1.67 V μm^-1 and one order higher field enhancement factor (β) of 8.6 × 10⁴ compared to the MoO₃ sample without Ag incorporation. From Kelvin probe force microscopy measurements, the average local work function (Φ) is found to be approximately 0.47 eV smaller for the Ag-MoO₃ sample (∼5.70 ± 0.05 eV) compared to the MoO₃ sample (∼6.17 ± 0.05 eV) and the reduction in Φ can be attributed to the shifting Fermi level of MoO₃ toward vacuum via electron injection from Ag NPs to MoO₃. The presence of oxygen vacancies together with Ag NPs lead to the highest β and lowest turn-on field among the reported values under the MoO₃ emitter category.

Mimicking an Enzyme-Based Colorimetric Aptasensor for Antibiotic Residue Detection in Milk Combining Magnetic Loop-DNA Probes and CHA-Assisted Target Recycling Amplification

A mimicking-enzyme-based colorimetric aptasensor was developed for the detection of kanamycin (KANA) in milk using magnetic loop-DNA-NMOF-Pt (m-L-DNA) probes and catalytic hairpin assembly (CHA)-assisted target recycling for signal amplification. The m-L-DNA probes were constructed via hybridization of hairpin DNA H1 (containing aptamer sequence) immobilized magnetic beads (m-H1) and signal DNA (sDNA, partial hybridization with H1) labeled nano Fe-MIL-88NH₂-Pt (NMOF-Pt-sDNA). In the presence of KANA and complementary hairpin DNA H2, the m-L-DNA probes decomposed and formed an m-H1/KANA intermediate, which triggered the CHA reaction to form a stable duplex strand (m-H1-H2) while releasing KANA again for recycling. Consequently, numerous NMOF-Pt-sDNA as mimicking enzymes can synergistically catalyze 3,3',5,5'-tetramethylbenzidine (TMB) for color development. The aptasensor exhibited high selectivity and sensitivity for KANA in milk with a detection limit of 0.2 pg mL^-1 within 30 min. The assay can be conveniently extended for on-site screening of other antibiotics in foods by simply changing the base sequence of the probes.

New Off-On Sensor for Captopril Sensing Based on Photoluminescent MoO x Quantum Dots

Molybdenum oxide nanomaterials have recently attracted widespread attention for their unique optical properties and catalytic performance. However, until now, there is little literature on the application of photoluminescent molybdenum oxide nanomaterials in biological and pharmaceutical sensing. Herein, photoluminescent molybdenum oxide quantum dots (MoO _x QDs) were synthesized via a facile method, and then, the synthesized MoO _x QDs were further applied as a new type of photoluminescent probe to design a new off-on sensor for captopril (Cap) determination on the basis of the fact that the quenched photoluminescence of MoO _x QDs by Cu²⁺ was restored with Cap through specific interaction between the thiol group of Cap and Cu²⁺. Under optimal conditions, the restored photoluminescence intensity showed a good linear relationship with the content of Cap, ranging from 1.0 to 150.0 μM, with a limit of detection of 0.51 μM (3σ/k). Additionally, the content of Cap in pharmaceutical samples was successfully detected with the newly developed off-on sensor, and the recoveries were 99.4-101.7%, which suggest that the present off-on sensor has a high accuracy.

Yolk-shell nanostructured Fe3O4@C magnetic nanoparticles with enhanced peroxidase-like activity for label-free colorimetric detection of H2O2 and glucose

Herein, we have developed a simple and facile method to synthesize yolk-shell nanostructured Fe₃O₄@C nanoparticles (NPs) as a multifunctional biosensing platform for the label-free colorimetric detection of H₂O₂ and glucose. It was demonstrated that Fe₃O₄@C yolk-shell nanostructures (YSNs) retained the magnetic properties that can be used for separation and concentration. Also importantly, the Fe₃O₄@C YSNs exhibited an intrinsic peroxidase-like activity that could quickly catalyze the enzyme substrate in the presence of H₂O₂ and produce a blue color. Compared to other similar ferric oxide-based NPs with different structures, Fe₃O₄@C YSNs exhibited greatly enhanced catalytic activities due to their unique structural features. Moreover, steady-state kinetics indicated the catalytic behaviors in agreement with the classic Michaelis-Menten models. Taking advantage of the high catalytic activity, Fe₃O₄@C YSNs were employed as novel peroxidase mimetics for label-free, rapid, sensitive, and specific colorimetric sensing of H₂O₂ and glucose, suggesting that Fe₃O₄@C YSNs have the potential for construction of portable sensors in the application of point-of-care (POC) diagnosis and on-site tests.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

Au-Loaded Hierarchical MoO3 Hollow Spheres with Enhanced Gas-Sensing Performance for the Detection of BTX (Benzene, Toluene, And Xylene) And the Sensing Mechanism

Monodisperse, hierarchical α-MoO₃ hollow spheres were fabricated using a facile template-free solvothermal method combined with subsequent calcination. Various quantities of Au nanoparticles (NPs) were deposited on the α-MoO₃ hollow spheres to construct hybrid nanomaterials for chemical gas sensors and their BTX sensing properties were investigated. The 2.04 wt % Au-loaded α-MoO₃ sensor can detect BTX effectively at 250 °C, especially, its responses to 100 ppm toluene and xylene are 17.5 and 22.1, respectively, which are 4.6 and 3.9 times higher than those of pure α-MoO₃ hollow spheres at 290 °C. Besides, Au loading decreased the response times to toluene and xylene from 19 and 6 s to 1.6 and 2 s, respectively, lowered the working temperature from 290 to 250 °C as compared with those of pure α-MoO₃. The surface status of Au/α-MoO₃ hollow spheres before and after contacting with toluene at 250 °C was analyzed through XPS technique. Possible oxidization product of toluene was confirmed by GC for the first time. The gas-sensing mechanism of the Au/α-MoO₃ was speculated as the oxidation of toluene to water and carbon dioxide by chemisorbed oxygen and lattice oxygen. The possible reason related with improved gas-sensing properties of the Au-functionalized α-MoO₃ was discussed.

Nano-Engineered Biomimetic Optical Sensors for Glucose Monitoring in Diabetes

Diabetes is a rapidly growing disease that can be monitored at an individual level by controlling the blood glucose level, hence minimizing the negative impact of the disease. Significant research efforts have been focused on the design of novel and improved technologies to overcome the limitations of existing glucose analysis methods. In this context, nanotechnology has enabled the diagnosis at the single cell and molecular level with the possibility of incorporation in advanced molecular diagnostic biochips. Recent years have witnessed the exploration and synthesis of various types of nanomaterials with enzyme-like properties, with their subsequent integration into the design of biomimetic optical sensors for glucose monitoring. This review paper will provide insights on the type, nature and synthesis of different biomimetic nanomaterials. Moreover, recent developments in the integration of these nanomaterials for optical glucose biosensing will be highlighted, with a final discussion on the challenges that must be addressed for successful implementation of these nano-devices in the clinical applications is presented.