Low-toxic Mn-doped ZnSe@ZnS quantum dots conjugated with nano-hydroxyapatite for cell imaging

FAP-Targeted Nanoparticle-based Imaging in Cancer: A Systematic Review

Background

Fibroblast Activation Protein (FAP)-targeted nanoparticles (NPs) are designed to accumulate in cancerous stroma. These NPs hold promise for imaging applications in cancer therapy.

Objective

This systematic review aimed to comprehensively explore the use of FAP-targeting NPs for cancer diagnosis through different imaging modalities.

Material and Methods

This systematic review followed the framework proposed by O'Malley and Arksey. Peer-reviewed studies were searched in the Scopus, Science Direct, PubMed, and Google Scholar databases. Eligible studies were selected, and data were extracted to investigate the FAP-targeting NPs in imaging. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guideline was also utilized to present the results.

Results

Five studies met the specified inclusion criteria and were finally selected for analysis. The extracted data was classified into two categories: general and specific data. The general group indicated that most studies have been conducted in Mexico and have increased since 2022, and the specific group showed that colorectal cancer and Nude mice have received the most research attention. Furthermore, FAP-targeted NPs have demonstrated superior diagnostic imaging capabilities, even compared to specific methods for each cancer type. Also, they have been safe, with no toxicity.

Conclusion

FAP-targeted NPs using different ligands, such as Fibroblast Activation Protein Inhibitor (FAPI), can accurately detect tumors and metastases, and outperform specific cancer peptides like PSMA in cancer diagnosis. They are also non-toxic and do not cause radiation damage to tissues. Therefore, FAP-targeted NPs have the potential to serve as a viable alternative to FAP-targeted radionuclides for cancer diagnosis.

Surface-Fabrication of Fluorescent Hydroxyapatite for Cancer Cell Imaging and Bio-Printing Applications

Hydroxyapatite (HAP) materials are widely applied as biomedical materials due to their stable performance, low cost, good biocompatibility and biodegradability. Here, a green, fast and efficient strategy was designed to construct a fluorescent nanosystem for cell imaging and drug delivery based on polyethyleneimine (PEI) and functionalized HAP via simple physical adsorption. First, HAP nanorods were functionalized with riboflavin sodium phosphate (HE) to provide them with fluorescence properties based on ligand-exchange process. Next, PEI was attached on the surface of HE-functionalized HAP (HAP-HE@PEI) via electrostatic attraction. The fluorescent HAP-HE@PEI nanosystem could be rapidly taken up by NIH-3T3 fibroblast cells and successfully applied to for cell imaging. Additionally, doxorubicin hydrochloride (DOX) containing HAP-HE@PEI with high loading capacity was prepared, and in-vitro release results show that the maximum release of DOX at pH 5.4 (31.83%) was significantly higher than that at pH 7.2 (9.90%), which can be used as a drug delivery tool for cancer therapy. Finally, HAP-HE@PEI as the 3D inkjet printing ink were printed with GelMA hydrogel, showing a great biocompatible property for 3D cell culture of RAW 264.7 macrophage cells. Altogether, because of the enhanced affinity with the cell membrane of HAP-HE@PEI, this green, fast and efficient strategy may provide a prospective candidate for bio-imaging, drug delivery and bio-printing.

Recent Progress of Rare Earth Doped Hydroxyapatite Nanoparticles: Luminescence Properties, Synthesis and Biomedical Applications

Hydroxyapatite nanoparticles (HAP NPs) are host materials and can be modified with various substrates and dopants. Among them, rare earth (RE) ions doped HAP NPs have gathered attention due to their unique physicochemical and imaging properties. Compared to other fluorescence probes, RE-doped HAP NPs display advantages in high brightness, high contrast, photostability, nonblinking, and narrow emission bands. Meanwhile, their intrinsic features (composition, morphology, size, crystallinity, and luminescence intensity) can be adjusted by changing the dopant ratio, synthesizing temperature, reaction time, and techniques. And they have been used in various biomedical applications, including imaging probe, drug delivery, bone tissue engineering, and antibacterial studies. This review surveys the luminescent properties, fluorescence enhancement, synthetic methods, and biocompatibility of various RE-doped HAP NPs consolidated from different research works, for their employments in biomedical applications. For this literature review, an electronic search was conducted in the Pubmed, Web of Science, Google Scholar, Scopus and SciFinder databases, using the keywords: hydroxyapatite, rare earth, lanthanide, fluorescence, and imaging. Literature searches of English-language publications from 1979 with updates through April, 2022, and a total of 472 potential papers were identified. In addition, a few references were located by noting their citation in other studies reviewed. STATEMENT OF SIGNIFICANCE: Hydroxyapatite nanoparticles (HAP NPs) have a broad range of promising biological applications. Although prospective biomedical applications are not limited to rare earth-doped hydroxyapatite nanoparticles (RE-doped HAP NPs), some cases do make use of the distinctive features of RE-elements to achieve the expected functions for HAP families. This review surveys the luminescent properties, synthetic methods, and biocompatibility of various RE-doped HAP NPs consolidated from different research works, for their employments in biomedical applications, including imaging probe, drug delivery, bone tissue repair and tracking, and anti-bacteria. Overall, we expect to shed some light on broadening the research and application of RE-doped HAP NPs in biomedical field.

Toxic effects of ZnSe/ZnS quantum dots on the reproduction and genotoxiticy of rare minnow (Gobiocypris rarus)

ZnSe/ZnS quantum dots (QDs) have excellent optical properties, but researchers have not clearly determined whether they cause harm to organisms. In the present study, the effect of ZnSe/ZnS QDs on the parents and offspring of rare minnow were evaluated for the first time. Exposure to ZnSe/ZnS QDs altered the testicular structure, caused sperm DNA damage and decreased sperm motility in males. They also suppressed the expression of reproduction-related genes, such as androgen receptor (Ar), DM-related transcription factor 1 (Dmrt1), estrogen receptor (Er), and X-ray repair cross complementing gene 1 (Xrcc1). Continued monitoring of the F1 generation revealed that the embryonic development of the F1 generation was abnormal and the growth index of the F1 generation of adult fish showed hormesis. A comet assay showed that the F1 generation still had DNA damage in the 400 and 800 nmol/L groups at 96 h post-fertilization (hpf). Thus, ZnSe/ZnS QDs damaged the reproductive system of the rare minnow, and this effect continued to the F1 generation.

Aptamer-mediated synthesis of multifunctional nano-hydroxyapatite for active tumour bioimaging and treatment

OBJECTIVES

The nano-hydroxyapatite (nHAp) is widely used to develop imaging probes and drug carriers due to its excellent bioactivity and biocompatibility. However, traditional methods usually need cumbersome and stringent conditions such as high temperature and post-modification to prepare the functionalized nHAp, which do not benefit the particles to enter cells due to the increased particle size. Herein, a biomimetic synthesis strategy was explored to achieve the AS1411-targeted tumour dual-model bioimaging using DNA aptamer AS1411 as a template. Then, the imaging properties and the biocompatibility of the synthesized AS-nFAp:Gd/Tb were further investigated.

MATERIALS AND METHODS

The AS-nFAp:Gd/Tb was prepared under mild conditions through a one-pot procedure with AS1411 as a template. Besides, the anticancer drug DOX was loaded to AS-nFAp:Gd/Tb so as to achieve the establishment of a multifunctional nano-probe that integrated the tumour diagnosis and treatment. The AS-nFAp:Gd/Tb was characterized by transmission electron microscopy (TEM), energy disperse X-ray Spectroscopy (EDS) mapping, X-ray photoelectron spectroscopy (XPS) spectrum, X-ray diffraction (XRD), fourier-transformed infrared (FTIR) spectroscopy, capillary electrophoresis analyses, zeta potential and particle sizes. The in vitro magnetic resonance imaging (MRI) and fluorescence imaging were performed on an MRI system and a confocal laser scanning microscope, respectively. The potential of the prepared multifunctional nHAp for a targeted tumour therapy was investigated by a CCK-8 kit. And the animal experiments were conducted on the basis of the guidelines approved by the Animal Care and Use Committee of Sichuan University, China.

RESULTS

In the presence of AS1411, the as-prepared AS-nFAp:Gd/Tb presented a needle-like morphology with good monodispersity and improved imaging performance. Furthermore, due to the specific binding between AS1411 and nucleolin up-expressed in cancer cells, the AS-nFAp:Gd/Tb possessed excellent AS1411-targeted fluorescence and MRI imaging properties. Moreover, after loading chemotherapy drug DOX, in vitro and in vivo studies showed that DOX@AS-nFAp:Gd/Tb could effectively deliver DOX to tumour tissues and exert a highly effective tumour inhibition without systemic toxicity compared with pure DOX.

CONCLUSIONS

The results indicated that the prepared multifunctional nHAp synthesized by a novel biomimetic strategy had outstanding capabilities of recognition and treatment for the tumour and had good biocompatibility; hence, it might have a potential clinical application in the future.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Mn2+ ions incorporated into ZnS x Se1-x colloidal quantum dots: controlling size and composition of nanoalloys and regulating magnetic dipolar interactions

A facile synthesis method is introduced how to prepare magnetically active ultraviolet emitting manganese ions incorporated into ZnS x Se1-x colloidal quantum dot (nanoalloy) at 110 °C in aqueous solutions. The reaction time is the main factor to control the hydrodynamic size from 3 to 10 nm and the precursor ratio is significant to tune the alloy composition. ZnS shell layer on the ZnS x Se1-x core was grown to passivate environmental effects. The nanoalloy has ultraviolet emission at 380 nm having a lifetime of 80 ns and 7% quantum yield. The incorporation of Mn2+ ions into the nanoalloys induced magnetic activity but did not modify the structure and photophysical properties of the nanoalloys. Colloidal and powdery samples were prepared and analyzed by electron paramagnetic resonance (EPR) spectroscopy. In the colloidal dispersions, EPR spectra showed hyperfine line splitting regardless of the Mn2+ ion fractions, up to 6%, indicating that Mn2+ ions incorporated into the nanoalloys were isolated. EPR signals of the powdery samples were broadened when the fraction of Mn2+ ions was higher than 0.1%. The EPR spectra were simulated to reveal the locations and interactions of Mn2+ ions. The simulations suggest that the Mn2+ ions are located on the nanoalloy surfaces. These findings infer that the magnetic dipolar interactions are regulated by the initial mole ratio of Mn/Zn and the physical state of the nanoalloys adjusted by preparation methods.

Effect of Preparation Parameters on Deep-Blue Light-Emitting Diodes Based on Nanostructured ZnSe/ZnS Multilayer Films

Compared to colloidal quantum dots, nanostructured multilayer films may also be a promising emission layer in future light-emitting diodes, due to their excellent photoluminescence (PL), narrow full width at half-maximum (FWHM), and wide color gamut. In this paper, multilayer-structured deep-blue light-emitting diodes (LEDs) were prepared, where nanostructured ZnSe/ZnS multilayer films act as the light-emitting layer. The device showed good blue electroluminescence (EL) spectrum locating at 448 nm with an FWHM of 31 nm. To improve the performance of the device, the effect of preparation parameters of different layers was investigated in detail. The results demonstrated that the preparation parameters of each layer affected the performance in different ways, and choosing the most suitable preparation parameters can achieve optimal performance. Furthermore, this multilayer-structured device based on nanostructured films as emission layer can also be applied in green and red LEDs or all-inorganic QLEDs.

Mono-dispersed nano-hydroxyapatite based MRI probe with tetrahedral DNA nanostructures modification for in vitro tumor cell imaging

Taking advantage of the superior biocompatibility, good stability in a wide pH and temperature range, as well as its strong affinity with DNA of hydroxyapatite (HAp), tetrahedral DNA nanostructures (TDNs) conjugated with AS1411 aptamer (anti-nucleolin overexpressed on tumor cell membranes) were employed as affinity ligands to construct a novel mono-dispersed HAp based probe with Gd³⁺ doping (Apt-TDNs-GdHAp) for MR imaging. The adsorption of TDNs on the nano-HAp surface facilely accomplished the construction of the Apt-TDNs-GdHAp probes. Meanwhile, the use of hydrophilic TDNs not only favored the phase-transfer from the oil phase to the aqueous phase, but also enhanced the mono-dispersion of this probe due to the well-ordered distribution of TDNs on the surface of nano-HAp. Moreover, Apt-TDNs-GdHAp probe with a better mono-dispersion and crystalinity achieved twice higher longitudinal relaxivity (r₁ value) than that of GdHAp synthesized by microwave-assisted method (Microwave-GdHAp), exhibiting much more excellent T₁-weighted imaging performance. With the introduction of TDNs, the stability and the tumor-targeting accessibility were also greatly improved, showing its great potential for further bio-applications.

Emission-tunable probes using terbium(III)-doped self-activated luminescent hydroxyapatite for in vitro bioimaging

Lanthanide ion (Ln³⁺)-doped nanoscale hydroxyapatites (nHAp) with tunable luminescence have attracted increasing attention due to their potential applications as useful biomedical tools (e.g., imaging and clinical therapy). In this study, we reported that doping Terbium (III) ions (Tb³⁺) in self-activated luminescent nHAp via a facile hydrothermal reaction, using trisodium citrate (Cit^3-), generates unique emission-tunable probes known as Cit/Tb-nHAp. The morphology, crystal phase, and luminescence properties of these Cit/Tb-nHAp probes are studied in detail. Moreover, the results demonstrate that the luminescence of self-activated nHAp originates from the carbon dots trapped within the nHAp crystals, in which partial energy transfer occurs from carbon dots (CDs) to Tb³⁺. The color tunability is successfully achieved by regulating the addition of Cit^3-. Biocompatibility study indicates that when co-cultured with C6 glioma cells in vitro for 3 days, ≤800 ppm Cit/Tb-nHAp is not cytotoxic for C6 glioma cells. We also present in vitro data showing efficient cytoplasmic localization of transferrin conjugated Cit/Tb-nHAp into C6 glioma cells by fluorescence cell imaging. We have successfully engineered Cit/Tb-nHAp, a promising biocompatible agent for future in vitro and in vivo fluorescence bioimaging.

A novel bi-modal probe based on BaHoF5 and Cu-doped QDs with enhanced CT contrast efficiency and fluorescent brightness for tumor-targeting imaging

In this work, a novel bi-modal imaging probe with enhanced CT contrast efficiency and FL brightness was constructed, in which the combination of a binary CT contrast agent BaHoF₅ and Cu-doped QDs served as a vehicle; hyaluronic acid (HA) was employed as a tumor-targeting ligand. With its CT contrast efficiency about 2.1- and 3.9-fold higher than PEG-BaHoF₅ and Iohexol, the CT contrast efficiency and the fluorescent brightness of the bi-modal probe were both enhanced. Likewise, its fluorescent brightness is almost 6-fold brighter after Cu-doped QDs loading. The most important contribution of this work lies on the proposed strategy. The inherent contradiction of the imaging sensitivity of CT and FL imaging is well balanced and a great CT/FL bi-modal imaging performance is simultaneously obtained even at low concentration (400 μg/mL) of the probe, which was superior to the previous CT/FL bi-modal probes. Moreover, since BaHoF₅ as a binary CT contrast agent was introduced instead of conventional Au and Bi₂S₃, the CT/FL bi-modal probe would be more suitable for different patients under different operation voltages. In addition, the in vitro tumor cell imaging also demonstrated a good photo-stability, FL brightness, and tumor-targeting capability of the probe, indicating its great potential in practical bi-modal imaging for further tumor diagnosis and therapy. Graphical abstract A novel bi-modal imaging probe with enhanced CT contrast efficiency and FL brightness was fabricated, in which its CT contrast efficiency was about 2.1- and 3.9-fold higher than PEG-BaHoF₅ and Iohexol, respectively, and its fluorescent brightness almost 6-fold brighter after Cu-doped QDs loading.

Preparation and biological imaging of fluorescent hydroxyapatite nanoparticles with poly(2-ethyl-2-oxazoline) through surface-initiated cationic ring-opening polymerization

Fluorescent hydroxyapatite (HAp) nanoparticles have received significant attention in biomedical fields due to their outstanding advantages, such as low immunogenicity, excellent biocompatibility and biodegradability. However, fluorescent HAp nanoparticles with well controlled size and morphology are coated with hydrophobic molecules and their biomedical applications are largely restricted by their poor dispersibility in physiological solutions. Therefore, surface modification of these hydrophobic fluorescent HAp nanoparticles to render them water dispersibility is of utmost importance for biomedical applications. In this work, we reported for the first time for preparation of water-dispersible hydrophilic fluorescent Eu³⁺-doped HAp nanoparticles (named as HAp-PEOTx) through the cationic ring-opening polymerization using hydrophilic and biocompatible 2-ethyl-2-oxazoline (EOTx) as the monomer. The characterization techniques, such as nuclear magnetic resonance (NMR) spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have been used to characterize these samples. Results confirmed that we could successfully obtain the hydrophilic fluorescent HAp-PEOTx composites through the strategy described above. These fluorescent HAp-PEOTx composites display great water dispersibility, unique fluorescent properties and excellent biocompatibility, making them promising for in vitro bioimaging applications.

Hyaluronan-directed fabrication of co-doped hydroxyapatite as a dual-modal probe for tumor-specific bioimaging

Hyaluronan-directed fabrication of Eu/Ba co-doped hydroxyapatite nanocrystals with recognition capability for dual-modal bioimaging.

Spontaneous shape and phase control of colloidal ZnSe nanocrystals by tailoring Se precursor reactivity

A novel synthetic method of shape and phase control of ZnSe nanocrystals by tailoring Se precursor reactivity is reported.

Luminescent, low-toxic and stable gradient-alloyed Fe:ZnSe(S)@ZnSe(S) core:shell quantum dots as a sensitive fluorescent sensor for lead ions

In this paper, an aqueous-based approach is introduced for facile, fast, and green synthesis of gradient-alloyed Fe-doped ZnSe(S)@ZnSe(S) core:shell quantum dots (QDs) with intense and stable emission. Co-utilization of co-nucleation and growth doping strategies, along with systematic optimization of emission intensity, provide a well-controllable/general method to achieve internally doped QDs (d-dots) with intense emission. Results indicate that the alloyed ZnSe(S)@ZnSe(S) core:shell QDs have a gradient structure that consists of a Se-rich core and a S-rich shell. This gradient structure cannot only passivate the core d-dots by means of the wider band gap S-rich shell, but also minimizes the lattice mismatch between alloyed core-shell structures. Using this novel strategy and utilizing the wider band gap S-rich shell can obviously increase the cyan emission intensity and also drastically improve the emission stability against chemical and optical corrosion. Furthermore, the cytotoxicity experiments indicate that the obtained d-dots are nontoxic nanomaterials, and thus they can be considered as a promising alternative to conventional Cd-based QDs for fluorescent probes in biological fields. Finally, it is demonstrated that the present low-toxicity and gradient-alloyed core:shell d-dots can be used as sensitive chemical detectors for Pb²⁺ ions with excellent selectivity, small detection limit, and rapid response time.

Enriching Mn-Doped ZnSe Quantum Dots onto Mesoporous Silica Nanoparticles for Enhanced Fluorescence/Magnetic Resonance Imaging Dual-Modal Bio-Imaging

Multimodal imaging is more suitable for disease diagnosis because of its ability to provide more complementary and accurate information over single-mode imaging. Mn-doped quantum dots (QDs), especially Mn-doped ZnS (ZnSe) QDs, possess unique fluorescent and magnetic properties and are thus attractive for fluorescence/magnetic resonance imaging (MRI) dual-mode imaging. However, the optimal dopant (Mn²⁺) concentration for maximizing the fluorescence of QDs is relatively low for the MRI imaging. Herein, based on the large Stokes shift of Mn-doped ZnSe QDs, an enrichment strategy with mesoporous silica (MSN) loading was explored for constructing a highly luminescent/paramagnetism Mn-doped ZnSe QDs assembly (MSN@QDs) for improved MRI/optical dual-model imaging. After assembly, the loading density of QDs in MSNs was estimated to be 152 ± 12. Upon loading, the fluorescence of the MSN@QDs assembly was enriched along with QDs (enrichment factor of ∼143). Because of the large Stokes shift (∼200 nm), no appreciable concentration quenching was observed. Meanwhile, the T₁ MR contrast was also increased both in vitro and in vivo through improved local Mn²⁺ concentration, realizing MRI signal enrichment. In fluorescence imaging investigations, MSN@QDs showed better performance over both single QDs and equivalent numbers of MSN-free single QD. Therefore, this enrichment strategy allowed simultaneous signal enhancement of the two imaging modes of Mn-doped ZnSe QDs.

Aqueous synthesis of L-cysteine and mercaptopropionic acid co-capped ZnS quantum dots with dual emissions

In this paper, L-cysteine (L-cys) and mercaptopropionic acid (MPA) co-capped ZnS quantum dots (QDs) with dual emissions have been successfully synthesized by a one-pot aqueous-phase synthesis method. The intensities of the dual emissions could be controlled by regulating the molar ratio of L-cys to MPA, and the fluorescence color also turned from blue to yellow accordingly. The relationship between the ligands and fluorescence was investigated and the results indicated that L-cys could cause two emissions and MPA improved the emission intensity. In addition, the L-cys-MPA co-capped ZnS QDs showed high photostability under UV irradiation. Therefore, the L-cys-MPA co-capped ZnS QDs, which show the dual emissions and tunable emission intensities, have great potentials for use in ratiometric fluorescence sensors and multicolor bioimaging.

Rapid preparation of self-assembled CdTe quantum dots used for sensing of DNA in urine

In this article, the authors report a systematic study of the self-assembly of CdTe quantum dots (QDs) stabilized by mercaptosuccinic acid (MSA) at laboratory temperature (25 °C) or after thermal treatment (90 °C).

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Sensitive prostate specific antigen quantification using dihydrolipoic acid surface-functionalized phosphorescent quantum dots

Herein, high-quality Mn-doped ZnS quantum dots (QDs) have been synthesized using a facile approach directly in aqueous media. The surface of the obtained QDs was further modified by cap-exchange of the native cysteine shell with dihydrolipoic acid (DHLA) ligands resulting in nanocrystals with high water-stability having an intense phosphorescent signal. Covalent bioconjugation of the DHLA-coated nanoparticles with an anti-IgG antibody was then carried out. Interestingly the QD immunoprobe (QD-labelled antibodies) maintained an intense phosphorescence emission, without any significant spectral-shift (as compared to the free QDs). Coupling of an asymmetric flow field flow fractionation technique to an elemental mass spectrometry detection enabled the accurate determination of the efficiency of the bioconjugation reaction. The obtained nanoparticle-antibody bioconjugate was then applied to develop a quantitative sandwich-type phosphorescent immunoassay for Prostate Specific Antigen (PSA), and a limit of detection (LOD) of 17 pg mL^-1 of PSA was achieved and allow to quantify such biomarker in samples within clinically relevant levels. Finally, the assay was validated for the quantification of PSA in the cellular media of prostate cancer cells. Obtained results proved the robustness of the proposed immunoassay based on long-lived phosphorescence measurements against eventual photoluminescent interferences significantly affecting the conventional short-lived fluorescence detection.

Efficient and Stable Luminescence from Mn2+ in Core and Core-Isocrystalline Shell CsPbCl3 Perovskite Nanocrystals

There has been a growing interest in applying CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) for optoelectronic application. However, research on doping of this new class of promising NCs with optically active and/or magnetic transition metal ions is still limited. Here we report a facile room temperature method for Mn²⁺ doping into CsPbCl₃ NCs. By addition of a small amount of concentrated HCl acid to a clear solution containing Mn²⁺, Cs⁺, and Pb²⁺ precursors, Mn²⁺-doped CsPbCl₃ NCs with strong orange luminescence of Mn²⁺ at ∼600 nm are obtained. Mn²⁺-doped CsPbCl₃ NCs show the characteristic cubic phase structure very similar to the undoped counterpart, indicating that the nucleation and growth mechanism are not significantly modified for the doping concentrations realized (0.1 at. % - 2.1 at. %). To enhance the Mn²⁺ emission intensity and to improve the stability of the doped NCs, isocrystalline shell growth was applied. Growth of an undoped CsPbCl₃ shell greatly enhanced the emission intensity of Mn²⁺ and resulted in lengthening the radiative lifetime of the Mn²⁺ emission to 1.4 ms. The core-shell NCs also show superior thermal stability and no thermal degradation up to at least 110 °C, which is important in applications.

In one harness: the interplay of cellular responses and subsequent cell fate after quantum dot uptake

Rapid growth and expansion of engineered nanomaterials will occur when the technology can be used safely. Quantum dots have excellent prospects in clinical applications, but the issue of toxicity has not yet been resolved. To enable their medical implementation, the effect on, and mechanisms in, live cells should be clearly known and predicted. A massive amount of experimental data dedicated to nanotoxicity has been accumulated to-date, but it lacks a logical structure. The current challenge is to organize existing knowledge into lucid biological and mathematical models. In our review we aim to describe the interplay of various cell death mechanisms triggered by quantum dots as a consequence of particle parameters and experimental conditions.

Facile Synthesis of Cadmium-Free Zn-In-S:Ag/ZnS Nanocrystals for Bio-Imaging

High quality cadmium-free Zn-In-S:Ag doped-nanocrystals (d-NCs) were synthesized via a simple one-step noninjection route using silver nitrate, indium acetate, zinc acetate, oleylamine, S powder and 1-dodecanethiol as starting materials in an organic phase. The size and optical properties can be effectively tailored by controlling the reaction time, reaction temperature, Ag(+) dopant concentration, and the molar ratio of In to Zn. The photoluminescence wavelength of as-prepared Zn-In-S:Ag NCs covered a broad visible range from 458 nm to 603 nm. After being passivated by protective ZnS shell, the photoluminescence quantum yield (PLQY) of Zn-In-S:Ag(+) /ZnS was greatly improved to 43.5%. More importantly, the initial high PLQY of the obtained core/shell d-NCs in organic media can be preserved when being transferred into the aqueous media via ligand exchange. Finally, high quality Zn-In-S:Ag(+) /ZnS d-NCs in aqueous phase were applied as bio-imaging agents for identifying living KB cells.

Experimental evidence of ZnS precursor anisotropy activated by ethylenediamine for constructing nanowires and single-atomic layered hybrid structures

Lateral view of a single-atomic layered ZnS(EN)_0.5 hybrid structure (left: BF-STEM image, right: schematic structure).

Bio-nanoplatforms based on carbon dots conjugating with F-substituted nano-hydroxyapatite for cellular imaging

Carbon dots (CDs) have shown great promise in a wide range of bioapplications due to their tunable optical properties and noncytotoxicity. For the first time, a rational strategy was designed to construct new bio-nanoplatforms based on carboxylic acid terminated CDs (CDs-COOH) conjugating with amino terminated F-substituted nano-hydroxyapatite (NFAp) via EDC/NHS coupling chemistry. The monodisperse NFAp nanorods were functionalized with o-phosphoethanolamine (PEA) to provide them with amino groups and render them hydrophilic with respect to the ligand exchange process. The CDs-COOH@PEA-NFAp conjugates exhibits bright blue fluorescence under UV illumination, excellent photostability and colloidal stability. Due to their low cytotoxicity and good biocompatibility as determined by methyl thiazolyl tetrazolium (MTT) assay, the CDs-COOH@PEA-NFAp conjugates were successfully applied as bio-nanoplatforms to MCF-7 breast cancer cells for cellular imaging in vitro. More importantly, the functional CDs conjugated to NFAp provide an extended and general approach to construct different water-soluble NFAp bio-nanoplatforms for other easily functionalised luminescent materials. Therefore, these green nanoplatforms may be a prospective candidate for applications in bioimaging or targeted biological therapy and drug delivery.