Ultrasensitive SERS detection of trinitrotoluene through capillarity-constructed reversible hot spots based on ZnO-Ag nanorod hybrids

Fabrication of flexible AuNPs@ polyimide heating chips for in situ explosives SERS sensing in nature samples

In this study, highly sensitive flexible AuNPs@ polyimide SERS heating chips (APHC) were fabricated for in situ collecting and detecting TNT. Large-scale AuNPs arrays were synthesized by liquid-liquid interface self-assembly and transferred to polyimide heating film as SERS substrates. 4-ATP and AgNPs functionalized on APHC were used as capture means and signal amplifiers, combining with TNT to form the AuNPs-TNT-AgNPs "sandwich" structure. This flexible APHC chip showed high sensitivity as enhancement factor was 5.5×10⁵, and good repeatability and stability (RSD<10%). It was applied to detect TNT solutions with a low concentration of 10^-9 M, and showed a good linear response in the range from 10^-5 to 10^-9 M (R² = 0.986). In addition, the detection method also had good selectivity and no response to various TNT analogs. More important, combing with the thermal enrichment strategy, TNT dispersed in environmental samples such as soil, fruit and clothing would be enriched as vapor then collected and detected by APHC. This APHC device shows great potential for in situ sensing platforms, due to its sensitivity, high efficiency, and excellent portability.

Impedimetric detection of 2,4,6-trinitrotoluene using surface-functionalized halloysite nanotubes

Herein, we report the application of amine-surface-functionalized halloysite nanotubes (HAs) as active materials for the quantitative detection of 2,4,6-trinitrotoluene (TNT). The findings indicated that HA could selectively capture TNT via a strong reaction between the amine groups on its surface and the TNT molecules. Plate electrodes were fabricated from HA to evaluate its TNT-sensing capacity by electrochemical impedance spectroscopy. Upon binding with TNT, the proton conductivity on the HA plate electrodes increased linearly with the TNT concentration from 1.0 × 10⁻¹¹ M to 1.0 × 10⁻⁴ M. The HA plate electrodes exhibited good sensitivity with a detection limit of 1.05 × 10⁻¹² M. Subsequently, the cycling measurements of the TNT binding/removal were performed on the HA plate electrode, and the material exhibited high stability, good regenerative ability, and good reversibility without a significant decrease in efficiency. The present work highlights the significant application potential of HAs for the electrochemical detection of TNT.

Amine-surface-functionalized halloysite nanotubes are used for electrochemical sensing TNT.

The novel sandwich composite structure: a new detection strategy for the ultra-sensitive detection of cyclotrimethylenetrinitramine (RDX)

This study presents a novel sandwich composite structure that was designed for the ultra-sensitive detection of cyclotrimethylenetrinitramine (RDX). Au nanorod arrays (Au NRAs) were prepared and bound to 10^-7M 6-MNA as adsorption sites for RDX, while Au nanorods (Au NRs) were modified using 10^-5M 6-MNA as SERS probes. During detection, RDX molecules connect the SERS probe to the surface of the Au NRAs, forming a novel type of Au NRAs-RDX-Au NRs 'sandwich' composite structure. The electromagnetic coupling effect between Au NRs and Au NRAs is enhanced due to the molecular level of the connection spacing, resulting in new 'hot spots'. Meanwhile, Au NRAs and Au NRs have an auto-enhancement effect on 6-MNA. In addition, the presence of charge transfer in the formed 6-MNA-RDX complex induced chemical enhancement. The limits of detection of RDX evaluated by Raman spectroscopy using 6-MNA were as low as 10^-12mg ml^-1(4.5 × 10^-15M) with good linear correlation between 10^-12and 10^-8mg ml^-1(correlation coefficientR² = 0.9985). This novel sandwich composite structure accurately detected RDX contamination in drinking water and on plant surfaces in an environment with detection limits as low as 10^-12mg ml^-1and 10^-8mg ml^-1.

Detection of Explosives by SERS Platform Using Metal Nanogap Substrates

Detecting trace amounts of explosives to ensure personal safety is important, and this is possible by using laser-based spectroscopy techniques. We performed surface-enhanced Raman scattering (SERS) using plasmonic nanogap substrates for the solution phase detection of some nitro-based compounds, taking advantage of the hot spot at the nanogap. An excitation wavelength of 785 nm with an incident power of as low as ≈0.1 mW was used to excite the nanogap substrates. Since both RDX and PETN cannot be dissolved in water, acetone was used as a solvent. TNT was dissolved in water as well as in hexane. The main SERS peaks of TNT, RDX, and PETN were clearly observed down to the order of picomolar concentration. The variations in SERS spectra observed from different explosives can be useful in distinguishing and identifying different nitro-based compounds. This result indicates that our nanogap substrates offer an effective approach for explosives identification.

Nanostructure-Based Surface-Enhanced Raman Spectroscopy Techniques for Pesticide and Veterinary Drug Residues Screening

Pesticide and veterinary drug residues in food and environment pose a threat to human health, and a rapid, super-sensitive, accurate and cost-effective analysis technique is therefore highly required to overcome the disadvantages of conventional techniques based on mass spectrometry. Recently, the surface-enhanced Raman spectroscopy (SERS) technique emerges as a potential promising analytical tool for rapid, sensitive and selective detections of environmental pollutants, mostly owing to its possible simplified sample pretreatment, gigantic detectable signal amplification and quick target analyte identification via finger-printing SERS spectra. So theoretically the SERS detection technology has inherent advantages over other competitors especially in complex environmental matrices. The progress in nanostructure SERS substrates and portable Raman appliances will promote this novel detection technology to play an important role in future rapid on-site assay. This paper reviews the advances in nanostructure-based SERS substrates, sensors and relevant portable integrated systems for environmental analysis, highlights the potential applications in the detections of synthetic chemicals such as pesticide and veterinary drug residues, and also discusses the challenges of SERS detection technique for actual environmental monitoring in the future.

Si-doped graphene nanosheets as a metal-free catalyst for electrochemical detection of nitroaromatic explosives

Si-doped graphene nanosheets (SiGNS) have been successfully constructed via high temperature annealing of graphene oxide and tetraethoxysilane mixture in a sealed glass ampoule. The Si atoms doped into graphene's carbon network mainly existed as C₃-Si-O and C₂-Si-O₂ configurations. The as-prepared SiGNS exhibited excellent electrochemical detection ability to nitroaromatic compounds in 0.1 M phosphoric acid buffer solution (PBS, pH = 8.0) via an electrochemical catalytic process. Five nitroaromatic compounds, including nitrobenzene, 2-nitrotoluene, 4-nitrotoluene, 2, 4-dinitrotoluene and 2, 4, 6-trinitrotoluene, were taken as the analyte to demonstrate the electrochemical catalytic ability of SiGNS. Density functional theory (DFT) calculation was carried out to explore the electrochemical catalytic mechanism of SiGNS. A hydrogen bond mediated electrochemical catalytic mechanism was proposed. Both the excellent electrical conductivity and the rich surface hydroxyl groups enhanced the electrochemical detection ability of SiGNS to nitroaromatic compounds. Si atoms in SiGNS played a key role for the excellent electrochemical detection ability of SiGNS due to most of the surface hydroxyl groups anchored on the Si atoms.

1,3-Di-naphthalimide Conjugate of Calix[4]arene as a Sensitive and Selective Sensor for Trinitrophenol and This Turns Reversible when Hybridized with Carrageenan as Beads

A fluorescent naphthalimide conjugate of calix[4]arene (L₁ ) has been synthesized and characterized. The selective and efficient detection of trinitrophenol (TNP) by L₁ among nine other different nitroaromatic compounds was demonstrated using absorption and fluorescence spectroscopy. The minimum detection limit is 29 nM, which is the lowest reported so far by any conjugate of calixarene toward TNP. The fluorescence quenching is associated with a high Stern-Volmer constant of 3.3 ± 0.4 × 10⁵ M^-1. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) data revealed a network structure with pores having a weighted average size of 0.66 ± 0.08 μm for L₁ . When incubated with TNP, the pores were filled with fibril structures, as supported by both SEM and TEM data. In order to demonstrate the real time applications, the L₁ has been coated onto a Whatman filter paper and the imprint of TNP contaminated thumb has been detected upon physical contact. The ¹HNMR titration and the studies carried out using the control molecule support the necessity of both the naphthalimide moiety and the calixarene platform for sensing. In order to mend L₁ as a reversible sensor for TNP, the same is incorporated into carrageenan beads (L₁ @C_b ) and the reversible sensing has been shown for three cycles by reusing the same material upon recovery followed by washing it. The solid-state detection of TNP has also been demonstrated using the lyophilized L₁ @C_b bead powder. The fluorescence intensity of L₁ was quenched upon addition of solid TNP to the lyophilized bead powder of L₁ @C_b as studied by fluorescence microscopy. The computational studies show that one of the arms of the calixarene takes a bent conformation, and the 1:1 TNP complex of L₁ is stabilized by exhibiting differential extents of hydrogen bonding interactions with the two arms owing to their conformational difference. The result of such complexation was already felt through the shifts observed in the experimentally measured ¹HNMR spectra.

A novel SERS selective detection sensor for trace trinitrotoluene based on meisenheimer complex of monoethanolamine molecule

Trinitrotoluene (TNT) is a primary component in chemical explosives, making them a common focus in public safety detection. However, it is very difficult to achieve selective and sensitive detection of the TNT molecule in practical application. In the present study, a simple surface enhanced Raman scattering (SERS) sensing based on monoethanolamine (MEA) - modified gold nanoparticles (Au NPs) was expanded for high selectivity and sensitive detecting of TNT in an envelope, luggage, lake water, and clothing through a quickly sampling and detection process. The monoethanolamine molecule based on Meisenheimer complex lights up ultra-high Raman scattering of a nonresonant molecule on the superficial coat of gold nanoparticles. Using this detection sensor, a molecular bridge can be established to selectively detect trinitrotoluene with a detection limit of 21.47 pM. We were able to rapidly identification trinitrotoluene molecule with a powerful selective over the familiar interfering substances nitrophenol, picric acid, 2,4-dinitrophenol, and 2,4-dinitrotoluene. The outcome in this work supply an efficient solution to the test of trinitrotoluene and to establishing a SERS sensor analytical strategy. The studies have demonstrated that the MEA-Au NPs based SERS sensing can be potentially used in field detection the trace amount of chemical explosives for public security.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

Controllable fabrication of Ag-NP-decorated porous ZnO nanosheet arrays with superhydrophobic properties for high performance SERS detection of explosives

An efficient hydrophobic condensation surface was developed and used as an ultrasensitive and stable SERS sensor based on ZnO–Ag hybrid mesoporous nanosheet (MNS) arrays for natural explosive sample detection.

Ag Nanorods-Based Surface-Enhanced Raman Scattering: Synthesis, Quantitative Analysis Strategies, and Applications

Surface-Enhanced Raman Scattering (SERS) is a powerful technology that provides abundant chemical fingerprint information with advantages of high sensitivity and time-saving. Advancements in SERS substrates fabrication allow Ag nanorods (AgNRs) possess superior sensitivity, high uniformity, and excellent reproducibility. To further promote AgNRs as a promising SERS substrate candidate to a broader application scope, oxides are integrated with AgNRs by virtue of their unique properties which endow the AgNRs-oxide hybrid with high stability and recyclability. Aside from SERS substrates fabrication, significant developments in quantitative analysis strategies offer enormous approaches to minimize influences resulted from variations of measuring conditions and to provide the reasonable data analysis. In this review, we discuss various fabrication approaches for AgNRs and AgNRs-oxide hybrids to achieve efficient SERS platforms. Then, we introduce three types of strategies which are commonly employed in chemical quantitative analysis to reach a reliable result. Further, we highlight SERS applications including food safety, environment safety, biosensing, and vapor sensing, demonstrating the potential of SERS as a powerful and promising technique. Finally, we conclude with the current challenges and future prospects toward efficient SERS manipulations for broader real-world applications.

Electrospun flexible poly(bisphenol A carbonate) nanofibers decorated with Ag nanoparticles as effective 3D SERS substrates for trace TNT detection

A flexible 3D hybrid PC/Ag surface-enhanced Raman scattering (SERS) substrate was fabricated through the combination of electrospinning and in situ chemical reduction. Due to the rough surface morphology and the intricate 3D structure, a high density of Raman "hotspots" was formed at the junctions of cross-linked nanofibers, resulting in excellent sensitivity to a probe molecule (4-aminothiophenol). The nanofibers were modified with l-cysteine to capture TNT molecules by the formation of a Meisenheimer complex, after which positively charged 4-ATP-labelled AgNPs were introduced to the system, which both generated more hotspots and led to a linear relationship between the TNT concentration and the SERS intensity of the labelled molecules. As a result, a good linear response ranging from 10^-8 to 10^-12 M was achieved, and the detection limit for TNT was as low as 2.05 × 10^-13 M. This strategy demonstrates an ultra-sensitive approach for the detection of trace amounts of TNT, and a promising method for the detection of many other analogous explosives.

Raman scattering enhancement of a single ZnO nanorod decorated with Ag nanoparticles: synergies of defects and plasmons

Surface-enhanced Raman scattering (SERS) of a single ZnO nanorod (NR) is demonstrated by coating with Ag nanoparticles (NPs). An enhancement factor of 1.2×10³ and 4.4×10² has been obtained for E₂ (high) mode (437  cm^-1) and A₁ (TO) mode (378  cm^-1), respectively. Electron paramagnetic resonance measurements reveal an unintentional donor state in ZnO NRs. The enhancement of deep-level emission and micro-absorption mapping of a single ZnO NR further confirms the presence of the donor state. The SERS is believed to result from the charge transfer between ZnO NRs and Ag NPs, which can be enhanced by the empty donor state in ZnO. Finally, single ZnO NRs coated with Ag can be used as good SERS substrates for small molecule detection. This Letter highlights the interaction between point defects and the SERS effect down to a single semiconductor NR.

Combination of a graphene SERS substrate and magnetic solid phase micro-extraction used for the rapid detection of trace illegal additives

Surface enhanced Raman scattering (SERS) is an ultra-sensitive spectroscopy technique, which can provide rich structural information for a great number of molecules, while solid phase micro-extraction (SPME) is an efficient method for sample pretreatment in analytical chemistry, particularly in a micro-system.

Hexagonally arranged arrays of urchin-like Ag-nanoparticle decorated ZnO-nanorods grafted on PAN-nanopillars as surface-enhanced Raman scattering substrates

Large-scale flexible films with one side consisting of ordered Ag-NPs@ZnO-nanorods/PAN-nanopillar arrays were used as recyclable SERS substrates.

A Ag synchronously deposited and doped TiO2 hybrid as an ultrasensitive SERS substrate: a multifunctional platform for SERS detection and photocatalytic degradation

We proposed a Ag synchronously deposited and doped TiO₂ hybrid as a dual-function platform for ultrasensitive SERS detection and efficient photocatalytic degradation.

Sensitive Detection of Competitive Molecular Adsorption by Surface-Enhanced Raman Spectroscopy

Surface adsorption plays a critical role in a wide variety of fields from surface catalysis to molecular separation. Despite the importance, limited access to simultaneously sensitive and selective detection mechanisms has hampered the acquisition of comprehensive and versatile experimental data needed to understand the complex aspects of mixture adsorption, calling for a molecular detection method capable of obtaining the surface adsorption isotherms over a wide range of concentrations as well as distinguishing the competitive adsorption of different adsorbates. Here, we test surface-enhanced Raman spectroscopy (SERS) as an effective analysis tool of surface adsorption phenomena. Using a sensitive SERS substrate, we characterize the adsorption isotherms of chemical species of various binding energies. We obtained the isotherms for strongly binding species in a concentration range from subpicomolar to micromolar. A log-sigmoidal dependency of the SERS signals to the analyte concentration could be modeled by surface binding theories accurately using molecular dynamics simulations, thereby bringing out the potential capability of sensitive SERS for describing a single-compound adsorption process. SERS also enabled the determination of competitive adsorption isotherms from a multiple-compound solution for the first time. The successful demonstration of the sensitive and selective characterization of surface adsorption lends SERS adaptability to a cheap, facile, and effective solution for chemical analysis.

Cost-Effective Plasmonic Platforms: Glass Capillaries Decorated with Ag@SiO2 Nanoparticles on Inner Walls as SERS Substrates

A cost-effective method for the fabrication of a glass capillary based plasmonic platform for the selective detection and identification of analytes of importance in health, environment, and safety is demonstrated. This was achieved by coating Ag@SiO₂ nanoparticles (Ag ∼ 60 nm) having silica shell of varying thickness (∼2 and ∼25 nm) on the inside walls of glass capillaries, over 2 cm in length, with uniform coverage. It was found that the particle density on the surface plays a decisive role on the enhancement of Raman signals. Multiple hot spots, which are essentially junctions of amplified electric field, were generated when ∼30 Ag@SiO₂ particles/μm² were bound onto the walls of glass capillaries. The pores of the silica shell allow the localization of analyte molecules to the vicinity of hot spots resulting in signal enhancements of the order of 10¹⁰ (using pyrene as analyte; excitation wavelength, 632.8 nm). The applicability of Ag@SiO₂ coated capillaries for the detection of a wide range of molecules has been explored, by taking representative examples of polyaromatic hydrocarbons (pyrene), amino acids (tryptophan), proteins (bovine serum albumin), and explosives (trinitrotoluene). By increasing the thickness of the silica shell of Ag@SiO₂ nanoparticles, an effective filtration cum detection method has been developed for the selective identification of small molecules such as amino acids, without the interference of large proteins.

Hand-Held Femtogram Detection of Hazardous Picric Acid with Hydrophobic Ag Nanopillar SERS Substrates and Mechanism of Elasto-Capillarity

Picric acid (PA) is a severe environmental and security risk due to its unstable, toxic, and explosive properties. It is also challenging to detect in trace amounts and in situ because of its highly acidic and anionic character. Here, we assess sensing of PA under nonlaboratory conditions using surface-enhanced Raman scattering (SERS) silver nanopillar substrates and hand-held Raman spectroscopy equipment. The advancing elasto-capillarity effects are explained by molecular dynamics simulations. We obtain a SERS PA detection limit on the order of 20 ppt, corresponding attomole amounts, which together with the simple analysis methodology demonstrates that the presented approach is highly competitive for ultrasensitive analysis in the field.

Detecting explosive molecules from nanoliter solution: A new paradigm of SERS sensing on hydrophilic photonic crystal biosilica

We demonstrate a photonic crystal biosilica surface-enhanced Raman scattering (SERS) substrate based on a diatom frustule with in-situ synthesized silver nanoparticles (Ag NPs) to detect explosive molecules from nanoliter (nL) solution. By integrating high density Ag NPs inside the nanopores of diatom biosilica, which is not achievable by traditional self-assembly techniques, we obtained ultra-high SERS sensitivity due to dual enhancement mechanisms. First, the hybrid plasmonic-photonic crystal biosilica with three dimensional morphologies was obtained by electroless-deposited Ag seeds at nanometer sized diatom frustule surface, which provides high density hot spots as well as strongly coupled optical resonances with the photonic crystal structure of diatom frustules. Second, we discovered that the evaporation-driven microscopic flow combined with the strong hydrophilic surface of diatom frustules is capable of concentrating the analyte molecules, which offers a simple yet effective mechanism to accelerate the mass transport into the SERS substrate. Using the inkjet printing technology, we are able to deliver multiple 100pico-liter (pL) volume droplets with pinpoint accuracy into a single diatom frustule with dimension around 30µm×7µm×5µm, which allows for label-free detection of explosive molecules such as trinitrotoluene (TNT) down to 10-10M in concentration and 2.7×10-15g in mass from 120nL solution. Our research illustrates a new paradigm of SERS sensing to detect trace level of chemical compounds from minimum volume of analyte using nature created photonic crystal biosilica materials.

Synthesis, characterization and application of TiO2/Ag recyclable SERS substrates

In this paper, rutile and anatase TiO₂/Ag nanocomposites were prepared by a facile and green photochemical method.

Optofluidic sensing from inkjet-printed droplets: the enormous enhancement by evaporation-induced spontaneous flow on photonic crystal biosilica

Novel transducers for detecting an ultra-small volume of an analyte solution play pivotal roles in many applications such as chemical analysis, environmental protection and biomedical diagnosis. Recent advances in optofluidics offer tremendous opportunities for analyzing miniature amounts of samples with high detection sensitivity. In this work, we demonstrate enormous enhancement factors (106-107) of the detection limit for optofluidic analysis from inkjet-printed droplets by evaporation-induced spontaneous flow on photonic crystal biosilica when compared with conventional surface-enhanced Raman scattering (SERS) sensing using the pipette dispensing technology. Our computational fluid dynamics simulation has shown a strong recirculation flow inside the 100 picoliter droplet during the evaporation process due to the thermal Marangoni effect. The combination of the evaporation-induced spontaneous flow in micron-sized droplets and the highly hydrophilic photonic crystal biosilica is capable of providing a strong convection flow to combat the reverse diffusion force, resulting in a higher concentration of the analyte molecules at the diatom surface. In the meanwhile, high density hot-spots provided by the strongly coupled plasmonic nanoparticles with photonic crystal biosilica under a 1.5 μm laser spot are verified by finite-difference time domain simulation, which is crucial for SERS sensing. Using a drop-on-demand inkjet device to dispense multiple 100 picoliter analyte droplets with pinpoint accuracy, we achieved the single molecule detection of Rhodamine 6G and label-free sensing of 4.5 × 10-17 g trinitrotoluene from only 200 nanoliter solution.

Ordered array of Ag semishells on different diameter monolayer polystyrene colloidal crystals: An ultrasensitive and reproducible SERS substrate

Ag semishells (AgSS) ordered arrays for surface-enhanced Raman scattering (SERS) spectroscopy have been prepared by depositing Ag film onto polystyrene colloidal particle (PSCP) monolayer templates array. The diversified activity for SERS activity with the ordered AgSS arrays mainly depends on the PSCP diameter and Ag film thickness. The high SERS sensitivity and reproducibility are proved by the detection of rhodamine 6G (R6G) and 4-aminothiophenol (4-ATP) molecules. The prominent enhancements of SERS are mainly from the “V”-shaped or “U”-shaped nanogaps on AgSS, which are experimentally and theoretically investigated. The higher SERS activity, stability and reproducibility make the ordered AgSS a promising choice for practical SERS low concentration detection applications.

Diethyldithiocarbamate (DDTC) induced formation of positively charged silver nanoparticles for rapid in situ identification of inorganic explosives by surface enhanced Raman spectroscopy

Diethyldithiocarbamate could induce the generation of positively charged silver nanoparticles for rapidin situdetection of the explosives with a portable Raman spectrometer.