Rhodamine based pH-sensitive “intelligent” polymers as lysosome targeting probes and their imaging applications in vivo

Design and Application of Fluorescent Probes to Detect Cellular Physical Microenvironments

The microenvironment is indispensable for functionality of various biomacromolecules, subcellular compartments, living cells, and organisms. In particular, physical properties within the biological microenvironment could exert profound effects on both the cellular physiology and pathology, with parameters including the polarity, viscosity, pH, and other relevant factors. There is a significant demand to directly visualize and quantitatively measure the fluctuation in the cellular microenvironment with spatiotemporal resolution. To satisfy this need, analytical methods based on fluorescence probes offer great opportunities due to the facile, sensitive, and dynamic detection that these molecules could enable in varying biological settings from in vitro samples to live animal models. Herein, we focus on various types of small molecule fluorescent probes for the detection and measurement of physical parameters of the microenvironment, including pH, polarity, viscosity, mechanical force, temperature, and electron potential. For each parameter, we primarily describe the chemical mechanisms underlying how physical properties are correlated with changes of various fluorescent signals. This review provides both an overview and a perspective for the development of small molecule fluorescent probes to visualize the dynamic changes in the cellular environment, to expand the knowledge for biological process, and to enrich diagnostic tools for human diseases.

Highly Sensitive Detection of Bacteria by Binder-Coupled Multifunctional Polymeric Dyes

Infectious diseases caused by pathogens are a health burden, but traditional pathogen identification methods are complex and time-consuming. In this work, we have developed well-defined, multifunctional copolymers with rhodamine B dye synthesized by atom transfer radical polymerization (ATRP) using fully oxygen-tolerant photoredox/copper dual catalysis. ATRP enabled the efficient synthesis of copolymers with multiple fluorescent dyes from a biotin-functionalized initiator. Biotinylated dye copolymers were conjugated to antibody (Ab) or cell-wall binding domain (CBD), resulting in a highly fluorescent polymeric dye-binder complex. We showed that the unique combination of multifunctional polymeric dyes and strain-specific Ab or CBD exhibited both enhanced fluorescence and target selectivity for bioimaging of Staphylococcus aureus by flow cytometry and confocal microscopy. The ATRP-derived polymeric dyes have the potential as biosensors for the detection of target DNA, protein, or bacteria, as well as bioimaging.

Dual Optical Nanosensor Based on Ormosil Nanoparticles for Monitoring O2 and pH

Monitoring O₂ and pH has excellent potential in different sensing applications, especially in biological and clinical applications. This report presents a protocol for synthesizing an optical dual nanosensor for those two parameters. The organically modified silica (ormosil) nanoparticles were prepared based on phenytrimethoxysilane in an aqueous solution using an acid-base one-pot strategy. Ormosil was selected as a lipophilic matrix for loading fluorescent O₂-sensitive dye platinum(II)-tetrakis-(pentafluorophenyl) porphyrin (Pt-TPFPP), which was quenched in the presence of O₂ gas and exhibited a considerable detection proficiency within a percentage range of (0-100%) O₂. Commercially available drug ingredient salicylamide was labeled on the surface of the nanoparticles using a coupling agent (3-glycidoxypropyl) trimethoxysilane (GPTMS). For measuring pH, salicylamide acted for the first time as a pH-sensitive probe based on a turn-on process with increasing pH. The nanosensor displayed a significant pH detection efficiency in the range of (pH = 6-10). Salicylamide turn-on fluorescence was attributed to the excited state intramolecular transfer (ESIPT) process followed by the inter charge transfer (ICT). The presented dual nanosensor opens new opportunities as a promising candidate material for industrial systems and medical applications.

Bioresorbable Nanostructured Chemical Sensor for Monitoring of pH Level In Vivo

Here, the authors report on the manufacturing and in vivo assessment of a bioresorbable nanostructured pH sensor. The sensor consists of a micrometer-thick porous silica membrane conformably coated layer-by-layer with a nanometer-thick multilayer stack of two polyelectrolytes labeled with a pH-insensitive fluorophore. The sensor fluorescence changes linearly with the pH value in the range 4 to 7.5 upon swelling/shrinking of the polymer multilayer and enables performing real-time measurements of the pH level with high stability, reproducibility, and accuracy, over 100 h of continuous operation. In vivo studies carried out implanting the sensor in the subcutis on the back of mice confirm real-time monitoring of the local pH level through skin. Full degradation of the pH sensor occurs in one week from implant in the animal model, and its biocompatibility after 2 months is confirmed by histological and fluorescence analyses. The proposed approach can be extended to the detection of other (bio)markers in vivo by engineering the functionality of one (at least) of the polyelectrolytes with suitable receptors, thus paving the way to implantable bioresorbable chemical sensors.

Synthesis and Optical Characterization of a Rhodamine B Spirolactam Dimer

Amide derivatives of xanthene dyes such as rhodamine B are useful in a variety of sensing applications due to their colorimetric responses to stimuli such as acidity changes and UV light. The optical properties of these molecules can be influenced by intermolecular associations into dimeric structures, but the exact impact can be hard to predict. We have designed a covalently linked intramolecular dimer of the dye rhodamine B utilizing p-phenylenediamine to link the two dyes via amide bonds. The doubly closed spirolactam version of this dimer, RSL₂, is isolated as a colorless solid. Under acidic conditions or UV exposure, RSL₂ solutions develop a pink color that is expected for the ring-opened form of the molecule. However, nuclear magnetic resonance (NMR) and single-crystal diffraction data show that the equilibrium still prefers the closed dimer state. Interestingly, the emission profile of RSL₂ shows solvatochromic blue fluorescence. Control studies of model compounds with similar structural motifs do not display similar blue fluorescence, indicating that this optical behavior is unique to the dimeric form. This behavior may lend itself to applications of such xanthene dimers to more sophisticated sensors beyond those with traditional binary on/off fluorescence profiles.

A Facile Fabrication of Lysosome-Targeting pH Fluorescent Nanosensor Based on PEGylated Polyester Block Copolymer

A novel lysosome-targeting PEGylated polyester-based fluorescent pH nanosensor is fabricated by the combination of ring-opening copolymerization (ROCOP), side-group modification and subsequent self-assembly. First, a key target amphiphilic copolymer carrier for rhodamine (Rh) pH indicator is synthesized in a facile manner by the ROCOP of phthalic anhydride with allyl glycidyl ether using mPEG-OH and t-BuP₁/Et₃B as the macroinitiator and binary catalyst, respectively. Subsequently, Rh moieties are covalently attached on the polymer chain with controllable grafting degree via an efficient thiol-ene click reaction. Concurrently, the effect of catalyst systems and reaction conditions on the catalytic copolymerization performance is presented, and the quantitative introduction of Rh is described in detail. Owing to its amphiphilic characteristics, the rhodamine-functionalized polyester-based block copolymer can self-assemble into micelles. With the covalent incorporation of Rh moieties, the as-formed micelles exhibit excellent absorption and fluorescence-responsive sensitivity and selectivity towards H⁺ in the presence of various metal cations. Moreover, the as-prepared micelles with favorable water dispersibility, good pH sensitivity and excellent biocompatibility also display appreciable cell-membrane permeability, staining ability and pH detection capability for lysosomes in living cells. This work provides a new strategy for the facile synthesis of novel biocompatible polymeric fluorescent pH nanosensors for the fluorescence imaging of lysosomal pH changes.

Unlocking Chemically Encrypted Information Using Three Types of External Stimuli

Encryption is critical to information security; however, existing chemical-based information encryption strategies are still in their infancy. We report here a new approach to chemical encryption involving a supramolecular gel QR (quick response) code with multiple encryption functions. Three color "turn-on" supramolecular polymer gels, G1-G3, were prepared that produce pink, purple, and yellow colors when subject to treatment with acetic acid vapor, UV light, and methanolic FeCl₃, respectively. As the result of hydrogen-bonding interactions at the gel interfaces, the three gels can be assembled to produce gel G4. Engraving a QR code pattern onto G4 then gave gel G5. When one or two stimuli are applied to the individual pieces corresponding to the QR engraved versions of the gels G1-G3 making up G5, a complete scannable pattern is not displayed, and the stored information cannot be recognized. Only when three different stimuli are applied at the same time does G5 give a complete recognizable pattern allowing the stored information to be retrieved. This strategy was applied to the decryption-based opening of a coded lock.

pH response of a hydroxyl-functionalized luminescent metal–organic framework based phosphor

The ligand sensitized Tb³⁺ centered emission of Tb-doped Y-based hydroxyl functionalized MOFs has been utilized for pH sensing in the visible range.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Multifunctional gold nanoparticles as smart nanovehicles with enhanced tumour-targeting abilities for intracellular pH mapping and in vivo MR/fluorescence imaging

A number of multimodal agents have been developed for tumour imaging and diagnosis, but most of them cannot be used to study the detailed physiological or pathological changes in living cells at the same time. Herein, a series of pH-responsive magnetic resonance and fluorescence imaging (MRI/FI) dual-modal "nanovehicles" are developed and tested. These new dual-modal materials allow for intercellular pH sensing, and those with units that are dually sensitive towards both acidic and basic environments have the ability for intracellular pH mapping and can be used to quantify pH at the cellular level. In addition, detailed pH changes in organelles (including lysosomes and mitochondria) can be investigated at the same time. On the other hand, with the tumour-targeting peptide (cRGD)-modified dual-modal nanovehicles, in vivo tumour MR and fluorescence imaging, which is suitable for cancer diagnosis, can be achieved. Moreover, it has been proved that these materials can pass through the blood brain barrier (BBB). By combining the above mentioned promising properties, these novel multifunctional "nanovehicles" may provide a new method for studying the role of pH during cancer diagnosis and treatment.

A multi stimuli responsive material with rhodamine B and carbazole groups

A facile material with multi stimuli responsive behaviors was developed. The chromic properties of the material can be observed by stimulating it with light, electricity and ions.

Synthesis of high drug loading, reactive oxygen species and esterase dual-responsive polymeric micelles for drug delivery

A novel high drug loading, controlled-release drug delivery system was constructed with dual-stimulus responsive abilities in cells.

Photostable and biocompatible AIE-active conjugated polyelectrolytes for efficient heparin detection and specific lysosome labelling

A series of new conjugated polyelectrolytes (CPEs) with emissive tetraphenylethene-containing backbones and specific targeting pendants are synthesized and characterized.

Dual stimuli-responsive saccharide core based nanocarrier for efficient Birc5-shRNA delivery

Stimuli-responsive delivery systems show great promise in meeting the requirements of several delivery stages to achieve satisfactory gene transfection.

A lysosome-targeted fluorescent sensor for the detection of glutathione in cells with an extremely fast response

A highly sensitive and selective Rhodamine B-based fluorescent sensor, RhB-1, for glutathione (GSH) was easily synthesized. An extremely fast detection response time of 10 s, which is the fastest one ever reported, is achieved in aqueous solutions over a wide pH range with large enhancement of emission intensity. The sensor detects GSH in cells and selectively accumulates in lysosomes.

Construction of pH-Sensitive "Submarine" Based on Gold Nanoparticles with Double Insurance for Intracellular pH Mapping, Quantifying of Whole Cells and in Vivo Applications

A series of "submarines", which composed of gold nanoparticles and modified with rhodamine and fluorescein derivatives, were presented. With dual sensitive units for both acidic and basic environment, these "gold nano-submarines" not only allow efficient intracellular pH mapping but also provide more accurate quantitative detection of pH alteration under different stimuli with distinct pH quantification range. Moreover, they even have the ability to pass through the blood brain barrier (BBB).

A single design strategy for dual sensitive pH probe with a suitable range to map pH in living cells

Due to the lack of a proper imaging approach, a veracious pH map of normal and abnormal cell is still rare. In this work, we presented a rhodamine-salicylaldehyde combination (Rh-SA2) as a novel pH probe, which has dual sensitive units for both acidic and basic environment. This dual sensitive probe acts like a chameleon in living cells and offers the doubling guarantees for endocellular pH mapping. Moreover, a quantitative measurement of cellular pH changes was allowed and the endocellular pH values under drug-associated stimuli were also investigated.

Plasmonic gold nanostars for multi-modality sensing and diagnostics

Gold nanostars (AuNSs) are unique systems that can provide a novel multifunctional nanoplatform for molecular sensing and diagnostics. The plasmonic absorption band of AuNSs can be tuned to the near infrared spectral range, often referred to as the "tissue optical window", where light exhibits minimal absorption and deep penetration in tissue. AuNSs have been applied for detecting disease biomarkers and for biomedical imaging using multi-modality methods including surface-enhanced Raman scattering (SERS), two-photon photoluminescence (TPL), magnetic resonance imaging (MRI), positron emission tomography (PET), and X-ray computer tomography (CT) imaging. In this paper, we provide an overview of the recent development of plasmonic AuNSs in our laboratory for biomedical applications and highlight their potential for future translational medicine as a multifunctional nanoplatform.

A ratiometric lysosomal pH probe based on the naphthalimide–rhodamine system

The ratiometric pH probe RNL was constructed by integrating the naphthalimide moiety as an FRET donor into the rhodamine moiety as an FRET acceptor. The probe with a pK_a of 4.82 could detect pH in the range of 4.50–5.50, selectively stain lysosome and detect lysosomal pH changes.

Novel biocompatible fluorescent polymeric micelles based on 1,8-naphthalimide derivatives for cell imaging

A new type of fluorescent polymeric micelle was developed by the aqueous self-assembly from amphiphilic block copolymers via click chemistry and showed good potential for application in cell imaging with good biocompatibility. Notably, P1 can readily serve as an excellent intracellular pH sensor in whole living cells based on PET inhibition

Magnetic nanomaterials with near-infrared pH-activatable fluorescence via iron-catalyzed AGET ATRP for tumor acidic microenvironment imaging

This work provides a fluorescent/magnetic iron oxide nanomaterials prototype to visualize the solid tumor in vivo by sensing the tumor acidic microenvironment, and a satisfactory tumor-to-normal tissue signal ratio (T/N ratio) and a prolonged time-window for 4T1 tumor visualization were observed in vivo.

A rhodamine B-based lysosomal pH probe

A novel rhodamine B-based lysosomal pH probe RML was developed. RML responded to acidic pH with short response time, high selectivity and high sensitivity and could detect lysosomal pH change in living cells.